Kambrook KSM25 User Manual

2

Essentials
Power Mix Duo

KSM25 Issue 1/04

G

O

O

D

N

A

M

E

G

O

O

D

V

A

L

U

E

Kambrook 4 Kingston Town Close Oakleigh,Victoria 3166, Australia
Customer Service Line (free call) 1800 800 634 Customer Service Fax [phone]
Kambrook New Zealand, Private Bag 94411, Greenmount, Auckland, New Zealand
Customer Service Line/Spare Parts 09 271 3980 Customer Service Fax [phone]

G

O

O

D

N

A

M

E

G

O

O

D

V

A

L

U

E

Due to continual improvement in design or otherwise, the product you purchase may differ slightly from the one illustrated in this book.Issue 1/04

32

1. Mixer motor body – 250 watts of
power

2. Eject button for release of
beaters/dough hooks

3. 5 Speed Selector Switch

4.Turbo boost button for maximum
power

5. Mixer motor body release button –
press to release mixer from stand

6. Mixer stand tilt button for easy bowl
and beater removal

ATTACHMENTS

7. Large mixing bowl

8. Chrome plated beaters

9. Chrome plated dough hooks

FEATURES OF YOUR KAMBROOK ESSENTIALS
POWER MIX DUO

KAMBROOK SAFETY

Welcome to Kambrook and your new
Essentials Power Mix Duo.

At Kambrook we believe that the safe
performance of our products is the first
priority in any consumer product so that
you, our valued customer, can confidently
use and trust our products.

We ask that any electrical appliance you
use be operated in a sensible fashion with
due care and attention placed on the
following important operating instructions:

Read all instructions thoroughly
before activating the appliance and
retain them for future reference.

Ensure that the power source used is the
same as the as the voltage requirements
of the product.

To protect against electric shock do not
immerse cord, plug or mixer body in
water or any other liquid.

Always use the appliance on a dry, level
surface.

Position your mixer away from the edge
of the bench top as it may move slightly
during use.

Handle your mixer and attachments with
care. Never place your fingers inside a
mixing bowl or near beaters during use.

Keep hands,hair, clothing, as well as spatulas
and other utensils away from moving
beaters during operation.

Ensure the motor and beaters have
completely stopped before setting the unit
down on the benchtop or disassembling.

Do not place hands in the mixing bowl
unless the unit is disconnected from the
power outlet. Disconnect the mixer from
the power outlet before removing beaters.

Use only the beaters and dough hooks
supplied with this mixer.

Always remove the beaters/dough hooks
from the mixer before cleaning.

Always switch the appliance off and then
switch off at the power outlet before
unplugging the appliance after use and

before attempting to move the appliance,
before putting on or taking off parts and
before cleaning.

The appliance is not intended for use by
young children or infirm persons without
supervision.

Do not leave the appliance unattended
when in use.

Young children should be supervised to
ensure that they do not play with the
appliance.

Do not let the cord hang over the edge of
a table or counter, touch hot surfaces or
become knotted.

Do not place this appliance on or near a
hot gas or electric burner, or where it
could touch a heated oven.

This appliance is for household use only.
Do not use this appliance for anything
other than its intended purpose. Do not
use outdoors.

Do not operate the appliance continuously
on heavy loads for more than 3 minutes.

The installation of a residual current
device (safety switch) is recommended to
provide additional safety protection when
using electrical appliances. It is advisable
that a safety switch with a rated residual
operating current not exceeding 30mA be
installed in the electrical circuit supplying
the appliance. See your electrician for
professional advice.

Regularly inspect the supply cord, plug and
actual appliance for any damage. If found
damaged in any way, immediately cease
use of the appliance and return the entire
appliance to the nearest authorised
Kambrook service centre for examination,
replacement or repair.

Please call 1800 800 634 for Service
Centre details.

ENSURE THE MIXER IS SWITCHED
OFF AND UNPLUGGED FROM THE
POWER OUTLET BEFORE ATTACHING
THE BEATERS TO THE MIXER OR THE
MIXER TO THE STAND.

2 3

1

2

3

4

5

6

7

8

9

544 5

ASSEMBLY AND
OPERATION OF YOUR
KAMBROOK ESSENTIALS
POWER MIX DUO

Attaching the Beaters/Dough Hooks

Ensure the Mixer motor body is
switched off and unplugged from the
power outlet before attaching the beaters
to the mixer motor body.

Place the Mixer Stand on a level,dry
surface, such as a bench top. Ensure the
Mixer Stand is in the horizontal position.

Attach the beaters to the mixer before it
is placed onto the Mixer Stand.

Insert each beater
shaft into the left
and right beater
sockets underneath
the mixer body
(Fig 1). Ensure the
beater with the
white cog wheel
collar is inserted into the socket with the
cog wheel pattern.This is important to
drive the bowl.

Insert the beaters by pushing the shaft of
the socket, turning slightly if required until
they lock into place.

THE BEATERS/DOUGH HOOKS
MUST BE INSERTED INTO THE
CORRECT SOCKET, AS THEY ARE NOT
INTERCHANGEABLE . IF NOT PLACED
CORRECTLY,THE BOWL WILL NOT
TURN.

Attaching Mixer Motor to Mixer
Stand

To attach the Mixer Body to the Mixer
Stand, position the beaters into the Mixer
Body, then align the white cog wheel
collar with the cog wheel gear on the
mixer stand.

Press the rear of
the Mixer Body
down on the stand
until the latch clicks
into the locking
position (Fig 2).

NOTE: The
beater/dough hook
with the white cog
wheel collar should be
in the correct socket so
that it aligns with the
cog wheel gear on the
Mixer Stand (Fig 3).
If not placed correctly,
the bowl will not turn.

Using your Essentials Power Mix Duo

Ensure that the Speed Selector Switch is
set to the (O) position.Also ensure that
the Mixer Body is securely attached to
the Mixer Stand before using.

Add ingredients to the mixing bowl as per
the recipe or your requirements.

Press the mixer
stand tilt button
while holding the
mixer body and
raise the mixer
assembly to the
upright position
(Fig 4).

Place the mixing
bowl on the Mixer
Stand (Fig 5).

Press the Mixer
Stand Tilt button
while holding the
Mixer Body and
lower the mixer
assembly so the beaters are inside the
mixing bowl.

NOTE: Make sure the Mixer Body is securely
attached to the Mixer Stand and locked into the
horizontal position before using.

Plug the cord into a 230/240v power
outlet and turn power ‘ON’.

To commence mixing, move the Speed
Selector Switch to the right to the
required speed.

Always begin mixing on a lower speed
setting to prevent splattering, increasing to
the desired speed for the mixing task.The
speed setting can be adjusted during
operation by moving the Speed Selector
Switch from left to right.

NOTE: Always turn the Essentials Power Mix Duo
off if you need to scrape down the bowl during
use.Then continue mixing.

AVOID CONTACT WITH BEATERS
DURING OPERATION. KEEP HANDS,
HAIR, CLOTHING, SPATULAS AND
OTHER UTENSILS AWAY FROM THE
BEATERS TO PREVENT INJURY OR
DAMAGE TO THE ESSENTIALS POWER
MIX DUO.

When mixing is complete move the Speed
Selector Switch to the (O) position.Turn
the power off at the power outlet and
unplug cord.

Press the Mixer Stand Tilt button and

raise

the Mixer Body to the upright position.

Remove the Mixer Body from the stand
by pressing the Motor Body Release button.

Removing the beaters/dough hooks

Remove the beaters/dough hooks by
pressing the Eject Button while grasping
the beater shafts.The beater/dough hooks
will be released automatically. DO NOT try
to pull the beaters/dough hooks out of the
sockets. Use a spatula to scrape remaining
mixture from the beaters/dough hooks.

ENSURE THE MIXER IS SWITCHED
OFF, UNPLUGGED FROM THE POWER
OUTLET AND REMOVE FROM BASE
BEFORE REMOVING BEATERS/DOUGH
HOOKS.

TURBO BOOST FUNCTION

Pressing the Turbo Boost button while
mixing provides an extra burst of power,
overriding the speed setting, selecting the
maximum speed setting. Press the Turbo
Boost button and hold it down for no more
than 30 seconds to avoid overheating. After
the Turbo Boost has been used, always
turn the mixer off and allow it to cool
down for a few minutes before using again.

This button can also operate as a pulse
button.When the unit is in the (O)
position pressing the ‘boost’ button will
operate the mixer.

Fig 1

Fig 2

Fig 3

Fig 4

Fig 5