4
Kambrook Recommends Safety First
IMPORTANT: Please retain your
instruction book for future use.
At Kambrook, we believe that safe performance is the first priority in any
consumer product, so that you, our valued customer can confidently
use and trust our products. We ask that any electrical appliance that
you use be operated in a sensible fashion with due care and attention
placed on the following important operating instructions.
Important Safeguards For Your Kambrook Inox
Sandwich Press
• Carefully read all instructions before
operating the Kambrook sandwich press for
the first time and save for future reference.
• Remove and safely discard any packaging
material and promotional stickers before
using the sandwich press for the first time.
• To eliminate a choking hazard for young
children, remove and safely discard the
protective cover fitted to the power plug of
this sandwich press.
• Always ensure the sandwich press is properly
assembled before use. Follow the instructions
provided in this book.
• Do not place the sandwich press near the
edge of a bench or table during operation.
Ensure the surface is level, clean and free
of water.
• Do not use on a sink drain board.
• Always operate the sandwich press on a
stable and heat resistant surface. Do not use
on a cloth-covered surface, near curtains or
other flammable materials.
• Keep the sandwich press clear of walls,
curtains and other heat or steam sensitive
materials.
• Do not place the sandwich press on or near
a hot gas or electric burner, or where it could
touch a heated oven. Use the sandwich
press well away from walls.
• Do not touch hot surfaces. Use the handles to
lift and open the top plate.
• Do not leave the sandwich press unattended
when in use.
• Do not place anything on top of the
sandwich press when the lid is closed, when
in use and when stored.
• When operating the sandwich press, ensure
the power cord is kept away from any heat
source including the surface of the sandwich
press. Ensure the power cord does not
become trapped between the upper and
lower hot plates of the sandwich press during
use and storage.
• Always switch the sandwich press off at
the power outlet, then unplug the power
cord and allow to cool if the sandwich
press is not in use, before cleaning, before
attempting to move the sandwich press,
disassembling, assembling and when
storing the sandwich press.
• Do not use chemicals, steel wool, metal
scouring pad or abrasive cleaners to
clean the sandwich press as these can
damage the housing or the coating of
the cooking plates.
• Always remove the food from the sandwich
press with a heatproof plastic spatula or
tongs. Never use your hands.
• Do not use sharp objects or utensils inside
the sandwich press as they may scratch
or damage the interior surface of the hot
cooking plate.