Jwin JV-TV5020 User Manual

JV-TV5020

USER’S MANUAL

CUSTOMER SERVICE INFORMATION

JWIN New York Office 51-41 59th Pl.,
Woodside, NY 11377 USA
Toll Free Number: 1-866-807-JWIN
E-mail: [e-mail]

8-CHANNEL QUAD SPLITTER

JV-TV5020 USER’S MANUAL JV-TV5020

USER’S MANUAL

CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT

RISK OF ELECTRIC SHOCK DO NOT OPEN

REMOVE COVER (OR BACK). NO USER-SERVICEABLE
PARTS INSIDE, REFER FOR SERVICE TO QUALIFIED
SERVICE PERSONNEL.

CAUTION

The lightning flash with arrowhead symbol, within an equatorial
triangle, is intended to alert the user to the presence of un-

outlet. Do not defeat the safety purpose of the polarized plug.

6-2. Other Keys

① FREEZE : Enables selected channel freezes in QUAD mode,

FULL mode, MODE function.

② 1 ~ 8 : Enables selected channel be displayed in full screen.

③ ARROWS : Works only in the menu screen.

④ ENTER : An editing mode on the menu screen.

⑤ PAGE : PAGE A, PAGE B change function.

7. TROUBLESHOOTING

insulated “dangerous voltage” within the product’s enclosure
that may be of sufficient magnitude to constitute a risk of
electric shock to persons.

The exclamation point within an equilateral triangle is intended
to alert the user to the presence of important operating and
maintenance (servicing) instructions in the literature
accompanying the appliance.

THE GRAPHIC SYMBOLS WITH SUPPLEMENTAL MARKING IS
APPLIED ON THE REAR SIDE OF THE SUBJECT MONITOR.

WARNING : To prevent fire or shock hazard, do not expose this appliance

to rain, water, wet locations. Do not insert any metallic object
through ventilation grilles

.

MPORTANT SAFETY INSTRUCTIONS

This video monitor equipment is provided with a polarized alternating-

current line plug (a plug having one blade wider than the other). This plug

will fit into the power outlet only one way. This is a safety feature. If you are

unable to insert the plug fully into the outlet, try reversing the plug. If the

plug should still fail to fit, contact your electrician to replace your obsolete

If the system does not function properly, check following points before

contacting the service center.

No Problem Possible Solutions

● Verify power to all pieces of equipment in

the system.

● Verify that the power switches are in the

1 No Video

Video,

2

But no control

ON

position.

● Verify that the cameras are properly

hooked up.

● Turn the power OFF for 30 seconds and

then turn it ON again.

8-CHANNEL QUAD SPLITTER 8-CHANNEL QUAD SPLITTER

JV-TV5020 USER’S MANUAL JV-TV5020

USER’S MANUAL

V C R MODE : The Screen comes to VCR mode.

FREEZE

PAGE

20

Z

UP

LEFT ENTER RIGHT MENU

DOWN

REMOTE CONTROL UNIT

. AUTO MODE : Displays each channel sequentially.

INDEX

19

1. PURPOSE OF THIS PRODUCT 1

2. SPECIFICATIONS 2

3. CONNECTIONS 3

4. INSTALLATION

4-1. Basic System Installation 5

4-2. Installation with a VCR or Time Lapse Recorder 6

5. OPERATION

5-1. Change Display Mode 8

5-2. QUAD Mode Operation 10

5-3. Automatic Camera Skip in the Auto Mode 11

SECTION 1

SECTION 2

SECTION 3

5

8

Fig. 10 Remote Control

6-1. Function select keys.

ZOOM MODE : 2X Zoom Mode

Z

QUAD MODE : It makes you to select the Quad Mode .

8-CHANNEL QUAD SPLITTER 8-CHANNEL QUAD SPLITTER

5-4. Manual Mode Operation 11

5-5. How to Program the Menus for On-Screen-Display

11

5-6. Recording and Playback 18

6. IR REMOTE CONTROL 18

6-1 Function Selection Keys

19

6-2 Other Keys 20

7. TROUBLESHOOTING 20

JV-TV5020 USER’S MANUAL JV-TV5020

USER’S MANUAL

SECTION 1

1. PURPOSE OF THIS PRODUCT

The purpose of this COLOR QUAD SPLITTER is to provide an

economical, but effective method to monitor more than one area with video

cameras. This Splitter has following features to enable the users to get the

best for their money and efforts:

z Accepts NTSC.

z NTSC : 720x480 Pixels.

z Real time quad picture display.

z PIP (Picture-In-Picture) function.

z 2x ZOOM with Vertical and Horizontal interpolation.

z Full-screen display of one camera.

z Four-position sequential switcher.

z Programmable dwell times to include cameras and the quad

5-6. Recording and Playback

1

There are two video output ports on the rear of the splitter. One

of them is MON port which is for output of the Quadrant pictures

and sequential pictures.

Read the specifications for Time Lapse Recorder or VCR

thoroughly before doing this step, because its manufacturer uses

different methods to record.

a. To record, connect a coaxial cable to the AUDIO IN and VIDEO

IN/OUT port on the rear of the monitor and connect the other

end of the coaxial cable to the VIDEO IN/OUT port on the VCR.

b. Press the “REC” button on the VCR.

c. To play, press the AUTO button of the monitor until it goes to

the VCR mode with black screen and beeping sound.

d. Press the “PLAY” button on the VCR.

e. The recorded picture will be displayed on the monitor.

When you are operating the normal VCR, make sure that the

display in the sequential switching mode.

z On-screen-display and programmable menus.

z User-programmed data is protected battery back up.

z Freeze capability can freeze a picture.

Program selectable border line.

8-CHANNEL QUAD SPLITTER 8-CHANNEL QUAD SPLITTER

VCR is in line or A/V mode.

6. IR REMOTE CONTROL

This color quad splitter is also operated by IR Remote Controller.