Jwin JT-P551 User Manual

Caller ID Speaker Phone with Emergency

Remote Control

Instruction Manual

JT-P551

Please read this manual carefully before operating and save it for future reference.

Have a question? Please visit http://www.jWIN.com

Caller ID Speaker Phone w/SOS Remote Control V11M11_IM_EN_04222008

USER SAFETY GUIDE

INSTRUCTIONS ON ENVIRONMENT PROTECTION

Do not dispose of this product in the usual household garbage at the end of its life cycle; bring it to a collection point for the recycling of electrical and electronic appliances. This symbol on the product means the instructions for use or the packaging will inform about the methods of disposal. The materials are recyclable as mentioned in its marking. By recycling, material recycling, and other forms of re-utilization of old appliances, you make an important contribution to the protection of the environment. Please inquire at your local community administration for an authorized disposal location.

Important Safety Instructions

When used as directed, this unit has been designed and manufactured to ensure your personal safety. However, improper use may result in electric shock, fire hazards or other dangers. Please read all safety and operating instructions carefully before installation and use. Remember to keep this instruction manual handy for future reference. Take special note of all warnings contained in these instructions and on the unit itself.

• Read and follow all instructions in this manual.

• Unplug this telephone from wall jack before cleaning with a damp cloth.

• Do not use liquid or aerosol cleansers to clean this product.

• Do not use this telephone in or near water (e.g. a bath tub, a sink, or a pool).

• To reduce the risk of electric shock, do not push objects through any slots of the

phone or disassemble the telephone. Pushing objects into the telephone or opening (or removing) covers exposes wires and poses serious risks.

• Do not disassemble and/or reassemble this telephone yourself. Contact technical support when service is required.

• Do not place this telephone on a bed, rug, or on any similar surface or near a heat source. Openings for ventilation must not be blocked or covered.

• Do not place this telephone on an unstable cart, stand, or table as it may fall, resulting in damage.

• Avoid using this telephone during electrical storms to prevent the risk of electric shock from lightning.

• Unplug this telephone from the phone jack and contact Customer Support if the following conditions occur:

o When it is exposed to rain or water o When it fails to operate normally o When it is dropped or its case is damaged o When it exhibits a distinct change in performance

• Do not use this telephone to report a gas leak in the vicinity of the leak.

• Follow all safety instructions and use this telephone with caution when installing

or modifying telephone lines.

o Do not install telephone wire during a lightning storm. o Only install telephone jacks in dry locations unless the jack is specifically

designed for wet locations.

• Avoid touching un-insulated telephone wires or terminals unless the telephone line is disconnected at the network interface.

- 1 -

www.jWIN.com

Caller ID Speaker Phone w/SOS Remote Control V11M11_IM_EN_04222008

USER SAFETY GUIDE

Compliance (USA and Canada)

This product complies with the standards in Part 68 of the FCC Rules in the USA and CS-03 in Canada.

1. This product must be connected to the public switched telephone network through a modular telephone outlet or jack.

2. Upon the request of the local telephone service provider, the user of this product must provide the following information:

• The “line” to which this telephone equipment will be connected (telephone

number)

• The telephone equipment’s FCC registration number and ringer equivalence

number. This information is printed on the back or bottom of the unit.

3. If it is determined that this equipment is malfunctioning, the FCC requires that it not be used and that it must be unplugged from the modular outlet until the problem has been corrected.

4. If the product causes harm to the telephone network, the telephone company may temporarily discontinue telephone service. Whenever possible, the telephone company will contact a customer prior to a service interruption. If advanced notice is not possible, the customer will be notifies as soon as possible. The customer will be given the opportunity to correct the problem.

- 2 -

www.jWIN.com

Caller ID Speaker Phone w/SOS Remote Control V11M11_IM_EN_04222008

TABLE OF CONTENTS

Getting Started

General Features ……………………………………………………………………... 4 What’s Included …..…………………………………………………………………... 4 Location of Controls ………………………………………………………………..… 5 Getting the Telephone Ready for Use ……………………………………………... 6 Mounting the Phone on the Wall ……………………………………………………. 7

Connecting the Stand for Wall Mounting ………………………………................. 7

Installing the Batteries ……………………………………………………………….. 9 Using an AC Adapter (Optional) …………………………………………………….. 9

Operational Instructions

Description of the Display ……………………………………………………………. 11 Basic Setup ……………………………………………………………………………. 11 Receiving Caller ID Information …………...………………………………………... 15 Emergency Call Function ……………………...…………………………………….. 16 Receiving a Call using the Pendant Remote ………...….………………………… 18 Reviewing the Caller ID List …………………………………………………………. 18 Erasing Data from the Caller ID List ………………………………………………... 18 Calling a Number from the Caller ID List …………………………………………... 18 Name Recording ……………………………………………………………………… 19 Phonebook Search, Delete and Dial Back ...………………………………………. 20 One-Touch Memory …………………………..……………………………………… 20 Pre-Dialing Function ……….…………………………………………………………. 20 Last Number Redial …………………………..……………………………………… 21 Using the Flash Function …………………………………………………………….. 21

Troubleshooting and Specifications …………………………………………….. 22

- 3 -

www.jWIN.com

Caller ID Speaker Phone w/SOS Remote Control V11M11_IM_EN_04222008

GETTING STARTED

Thank you for purchasing the JT-P551 Caller ID Speaker Phone with emergency pendant remote control. Please read and follow the instructions in this manual carefully to ensure that your product operates correctly.

General Features

• Supports both FSK and DTMF systems

• Emergency call (SOS) function with 2.4GHz wireless pendant remote control

• Emergency message recording

• Speaker phone system

• 16-digit liquid crystal display (LCD)

• Stores ID information for up to 60 calls

• Digital phonebook for 30 telephone numbers

• 2 one-touch speed dial buttons

• Clock and date display

• Redial and flash functions

• Incoming call indication

• Flashing ringer light

• Tone / pulse mode selection

• Ringer / receiver / speaker phone volume controls

• Supports 11 languages: English, French, Spanish, Italian, Portuguese, German,

Dutch, Swedish, Danish, Polish, Finnish

• 3 languages for voice reporting: English, French, Italian

What’s included

• Caller ID phone

• Wireless pendant remote control

• Instruction manual

- 4 -

www.jWIN.com

Caller ID Speaker Phone w/SOS Remote Control V11M11_IM_EN_04222008

GETTING STARTED

Location of Controls

3 4 5 6 7

8 9

1. LCD Screen 9. CID/ESC Button

2. DEL Button 10. SEARCH ▲ Button

3. OK DIAL Button 11. SEARCH ▼ Button

4. Handset 12. ONE CALL Button with light

5. SOS Emergency Dial Button 13. Receiver Volume Button

6. M2 (Memory 2) 14. Number Keypad

7. M1 (Memory 1) 15. REDIAL/P Button

8. MENU Button 16. FLASH Button

Getting the Telephone Ready for Use

1. Choose a desired location for the unit (mounted or on a flat, level surface).

2. Adjust the removable tab located above the speaker on the base of the phone.

• The tab slides for easy removal.

15 16

- 5 -

www.jWIN.com

Caller ID Speaker Phone w/SOS Remote Control V11M11_IM_EN_04222008

GETTING STARTED

Getting the Telephone Ready for Use- continued

• For wall mounted units, the side of the tab with the lip must be situated toward

the top of the base to allow the handset to hang on the base without falling. The lip fits into the opening under the earpiece on the handset.

• For flat, level placement, the side of the tab with the lip should be situated

toward the bottom of the base to allow smooth removal of the handset from the base.

3. Plug one end of the coiled telephone cord into the jack on the handset, and the other into the matching jack on the left side of the unit’s base.

4. Plug one end of the flat telephone cord into the jack in the rear of the unit’s base (marked TEL-LINE), and the other end into the wall jack which supplies telephone service.

LIP NO LIP

- 6 -

www.jWIN.com

Caller ID Speaker Phone w/SOS Remote Control V11M11_IM_EN_04222008

ger

GETTING STARTED

Mounting the Phone on the Wall

1. Choose a desired wall location for the phone.

2. Align nails or picture hooks with the wall-

mount hanger located on the bottom surface of the base.

3. Hammer nails or hangers into the wall so

the phone can hang flush with the wall.

4. Set the removable receiver tab with lip toward the top of the base.

5. Hang phone on nails or picture hangers making certain that the phone is flush

with the wall.

Connecting the Stand for Flat Surfaces

When using the JT-P551 on a flat surface, it is recommended that you use the included stand.

1. Remove the stand from the plastic wrapper.

2. Turn the phone upside down with the battery compartment closest to you.

3. The stand attaches above where the battery compartment is located.

4. There are four (4) slots. The top slot is large and located in the center of the bottom surface of the unit. The bottom three (3) slots are situated closer together and are located near the battery compartment.

Wall mount han

- 7 -

www.jWIN.com

+ 16 hidden pages