Jwin JP-187, JP-177, JP-197 User Manual

DIGITAL PHOTO FRAME

Instruction Manual

JP-177, JP-187, JP-197

Please read this manual carefully before operating and save it

for future reference.

Have a question? Please visit http://www.jWIN.com

Digital Photo Frame V10M10_IM_EN_09252007

- 1 -

www.jWIN.com

Digital Photo Frame V10M10_IM_EN_09252007

USER SAFETY GUIDE

Instructions on Environmental Protection

Do not dispose of this product in the usual
household garbage at the end of its life
cycle; bring it to a collection point for the
recycling of electrical and electronic
appliances. This symbol on the product
means the instructions for use or the packing
will inform about the methods for disposal. The materials are
recyclable as mentioned in its marking. By recycling, material
recycling, or other forms of re-utilization of old appliances, you
make an important contribution to protect the environment.
Please inquire at your local community administration for the
authorized disposal location.

Important Safety Warnings

1. To prevent fire or electric shock, do not expose the unit to
rain or moisture.

2. Never attempt to open the cabinet. Always refer servicing to
a qualified technician.

FCC regulations state that any change or modification to the
equipment, not expressly approved by maker or its
authorized parties, could void user’s authority to operate
this equipment.

- 2 -

www.jWIN.com

Digital Photo Frame V10M10_IM_EN_09252007

USER SAFETY GUIDE

Important Safety Instructions

1. READ INSTRUCTIONS - All safety and operating
instructions should be read before the appliance is
operated.

2. RETAIN INSTRUCTIONS - The safety and operating
instructions should be retained in a secure place for future
reference.

3. HEED WARNINGS - All warnings on the appliance and in
the operating instructions should be observed.

4. FOLLOW INSTRUCTIONS - All operating and use
instructions should be followed.

5. WATER AND MOISTURE - The appliance should not be
used near water. For example: near a bathtub, kitchen sink,
laundry tub, and/or swimming pool.

6. HEAT - The appliance should be situated away from heat
sources such as radiators, heat registers, stoves, or other
appliances (including amplifiers) that produce heat.

7. POWER SOURCES - The appliance should be connected
to a power supply only of the type described in the
operating instructions or as marked on the appliance.

8. CLEANING - The appliance should only be cleaned with a
dry cloth.

9. OBJECT AND LIQUID ENTRY - Care should be taken so
that objects do not fall and liquids are not spilled into the
device’s openings.

10. CARTS AND STANDS - The appliance
should be used only with a cart or stand that
is recommended by the manufacturer. An
appliance and cart combination should be
moved with care. Quick stops, excessive
force, and uneven surfaces may cause the appliance and
cart combination to overturn causing possible injury to the
user and/or damage to the unit.

- 3 -

www.jWIN.com

Digital Photo Frame V10M10_IM_EN_09252007

USER SAFETY GUIDE

Important Safety Instructions – Continued

11. DAMAGE REQUIRING SERVICE - The appliance should
be serviced by qualified service professional when:
a. Objects have fallen into, or liquid has been spilled into

the appliance’s apertures.
b. The appliance has been exposed to rain.
c. The appliance has been dropped and suffered damage.
d. The appliance does not appear to operate normally, or

exhibits a change in performance.

12. SERVICING - The user should not attempt to service the
appliance beyond what is described in the user's operating
instructions. All other servicing should be referred to
qualified service professional.

13. LEAD AND MERCURY - This product may contain lead
and/or mercury. Disposal of these materials may be
regulated by your local authorities due to environmental
considerations. For more detailed disposal or recycling
information, please contact your local authorities or the EIA
(Electronic Industries Alliance) – http://www.eiae.org

Additional Safety Instructions

• When not in use, keep your device in a safe place where it
will not be bent or crushed.

- 4 -

www.jWIN.com

Digital Photo Frame V10M10_IM_EN_09252007

USER SAFETY GUIDE

FCC Notice to U.S. Users

This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) this device may not
cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause
undesired operation. Refer to 47 CFR Sec. 15.19.

This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to radio
communications, which can be determined by turning the
equipment off and on, the user is encouraged to correct the
interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and

receiver.

• Connect the equipment to an outlet on a circuit different
from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician
for help.

NOTE: Changes or modifications not expressly approved by
the party responsible for compliance could void the user’s
authority to operate the equipment. Refer to 47 CFR Sec.

15.21.

- 5 -

www.jWIN.com

Digital Photo Frame V10M10_IM_EN_09252007

USER SAFETY GUIDE

Industry Canada Notice to Canadian Users

Operation is subject to the following two conditions: (1) this
device may not cause harmful interference, and (2) this device
must accept any interference received, including interference
that may cause undesired operation of the device. Refer to IC
RSS 210 Sec. 5.11. The term “IC” before the certification or
registration number only means that the registration was
performed based on a Declaration of Conformity and that
Industry Canada technical specifications were met. It does not
imply that Industry Canada (IC) approved this equipment. Refer
to Self-Marking 6(f) and RSP 100 Sec. 4.

- 6 -

www.jWIN.com

Digital Photo Frame V10M10_IM_EN_09252007

GETTING STARTED

Thank you for purchasing the JP-177 / JP-187 / JP-197. Unpack
the unit and make sure all the accessories are put aside so they
will not be lost.

Digital photo frame with 7” TFT LCD
widescreen

• Displays digital photos on 7” widescreen

• Capable of JPEG, MP3 files

• Reads various memory cards, such as SD, MMC, and MS

• USB2.0 host

• Alarm clock function with calendar

• Stereo speakers

• Supports slideshow with multiple interval time per picture

• No computer required

• Rotate / Flip pictures horizontally or vertically

• AV output

What’s included

• Digital photo frame

• Remote control

• Detachable stand

• AC adapter (UL/cUL listed)

• Instruction manual

- 7 -

www.jWIN.com

Digital Photo Frame V10M10_IM_EN_09252007

GETTING STARTED

Location of Controls

- 8 -

www.jWIN.com

Digital Photo Frame V10M10_IM_EN_09252007

GETTING STARTED

Location of Controls- continued

- 9 -

www.jWIN.com

Digital Photo Frame V10M10_IM_EN_09252007

GETTING STARTED

Location of Controls- continued

1. Display Screen 10. DOWN Button

2. AV OUT Jack 11. LEFT Button

3. HEADPHONE Jack 12. RIGHT Button

4. REMOTE Sensor 13. PLAY/PAUSE Button

5. STAND 14. STOP Button

6. POWER Button 15. MEMORY CARD Slot

7. DC 12V INPUT Jack 16. USB Port

8. FUNCTION Button 17. SPEAKERS

9. UP Button

Location of Controls on the Remote

1
2

3
4

5
6
7
8
9
10
11
12

13
14

15
16

17

18

19
20
21
22
23
24
25
26
27

1. DISPLAY Button

2. STANDBY Button

3. MENU Button

4. SUBTITLE Button

5. L/R Button

6. REPEAT Button

7. SETUP Button

8. ENTER Button

9. NAVIGATION Buttons

10. FUNCTION Button

11. FWD Button

12. REV Button

13. CLOCK Button

14. CALENDAR Button

15. SPEAKER Button

16. TFT On/Off Button

17. NUMERIC Keypad

18. Zoon Button

19. PLAY/PAUSE Button

20. STOP Button

21. MUTE Button

22. VOLUME – Button

23. VOLUME + Button

- 10 -

www.jWIN.com

Digital Photo Frame V10M10_IM_EN_09252007

GETTING STARTED

Location of Controls on the Remote­continued

24. NEXT Button 26. CARD Button

25. PREV Button 27. USB Button

General Setup

1. Plug one end of the AC adapter into the AC Jack in the JP-

177, JP-187, or JP-197 and the other end to a standard AC
electrical outlet.

2. Insert a memory card into the appropriate slot on the side of

the picture frame.
Note: This unit is compatible with MMC, MS, SD memory cards.
The memory card will fit in only one direction; DO NOT FORCE.
When properly inserted, the card should fit firmly and securely in
the appropriate slot.

3. Power the unit ON.

4. Press any key on the panel or remote control to exit logo

mode to main menu.

Power On / Off

1. Slide the ON/OFF switch on the back of the main unit to the

ON position to power the unit on.

2. Slide the ON/OFF switch on the back of the main unit to the

OFF position to power the unit off.

Headphone Use

For private listening, insert a headphone or earphone plug into
the HEADPHONE Jack.
Note: Listening to loud music can cause permanent damage to
hearing. Set volume to a comfortable listening level.

- 11 -

www.jWIN.com

Digital Photo Frame V10M10_IM_EN_09252007

GETTING STARTED

Connecting to a TV

To view your digital photos on a
TV screen, monitor, or other
external device, please follow
these illustrations.

Attaching the Stand

Follow these instructions to connect the stand.

1. Connect the Stand to the back of the photo frame as shown.

2. Slide the Stand up or down to adjust the

angle.

- 12 -

www.jWIN.com

Digital Photo Frame V10M10_IM_EN_09252007

OPERATIONAL INSTRUCTIONS

System Setup

While in the main menu, press the NAVIGATION buttons to
select the Setup option to display setup menu. Press the

NAVIGATION buttons to select the desired item. Press the
NAVIGATION buttons again to choose from various sub-options

for each item on the screen.

Photo setting

• Interval time: To browse pictures at interval time, there are

several options: 5sec./10sec./15sec./30./1min./3min.

• Transition effect: Select one of the effects when changing

from one picture to another: No effect /Cover up / Cover

down / Cover left / Cover right / Uncover up / Uncover down /

Uncover left / Uncover right / Wipe up/Wipe down/Wipe

left/Wipe right/Push up/Push down / Push left / Push right /

blind vertical / blind horizontal / color ration Ver / color Ration

Hor / random.

• Browse: Choose this option to enter thumbnail and file

manager mode.

- 13 -

www.jWIN.com

Digital Photo Frame V10M10_IM_EN_09252007

OPERATIONAL INSTRUCTIONS

Auto play

The options of auto play include photo and music.

Display setup

• TV output: This option is use to select AV output to TV or TFT

panel.

• Display type: This option is used to select the Full screen and

normal type.

• Brightness/contrast: This option is used to select video

brightness and contrast.

• TFT Brightness/TFT contrast/TFT saturation: to select TFT

LCD panel brightness, contrast and saturation.

Custom setup

• Repeat mode: There are four modes: repeat one, repeat

Folder, repeat ALL and OFF.

• Style: Select one of following style to display different setup

menu style. The options are: style 1/style 2/style 3/style 4.

• Encoding: Provides subtitle encoding method selection. Only

after you selected right encoding option is selected can the

system support language subtitles in movie file.

• Default: Return setup data to factory default.

•

Media: Sets priority for default media source

•

OSD language:

The OSD language option depends on

the software and sales destination.

Exit

Press ENTER to exit the setup menu.

- 14 -

www.jWIN.com

Digital Photo Frame V10M10_IM_EN_09252007

OPERATIONAL INSTRUCTIONS

Viewing Photos

After startup, the main menu will appear on the screen. Use the
NAVIGATION [] buttons to choose the photo option and
press ENTER to select.

In the photo menu, the unit will browse pictures automatically
one-by-one. During the photo play, press the STOP button to
enter the thumbnail mode.
In thumbnail mode, photo information is displayed on the bottom
of the screen: Resolution, Create Date, Rotate, and Slide Show.

Rotating Images

In Thumbnail mode, use the NAVIGATION Buttons to highlight
the Rotate option and press the ENTER button to rotate it.

- 15 -

www.jWIN.com

Digital Photo Frame V10M10_IM_EN_09252007

OPERATIONAL INSTRUCTIONS

Slide Show

Select the Slide Show option for the images to display one-by­one. To rotate pictures in the Slide Show mode use the
NAVIGATION buttons as follows:

•  Vertical (flip vertically)

•  Horizontal (flip horizontally)

•  90° (clockwise)

•  90° (counter-clockwise)

Playing Music

In the main menu, press the NAVIGATION Buttons to select the
Music option. Press ENTER to confirm.

• In Music mode, the system will automatically play files in the

default media (USB or Card) beginning with the first file.

• Music files can also be specifically chosen in Music mode by

Scrolling to the selected file, highlighting it and pressing the

ENTER button to begin playback.

Photos and Music

In the main menu, Press the NAVIGATION Buttons to select the
Photo + Music option. Press ENTER to confirm.

• Photos will display in a Slide Show.

• Music from the default media (USB or Card) will play

beginning with the first file.

Calendar

In the main menu, press the NAVIGATION buttons to select
Calendar option. Press the ENTER to confirm.

1. Display: Select this item to display a calendar

2. Set Date: Select this item to change date information with

yyyy-mm-dd format

3. Exit: Select this item to return to main menu.

- 16 -

www.jWIN.com

Digital Photo Frame V10M10_IM_EN_09252007

OPERATIONAL INSTRUCTIONS

Clock

In the main menu, press NAVIGATION buttons to select Clock
option. Press the ENTER button to confirm.

1. Display: Choose CLOCK to display a clock on screen only or

choose CLOCK & CALENDAR to display a calendar with

clock on screen.

2. Set Time: Select this item to change time information with

hh:mm:ss format.

3. Exit: Select this item to return to main menu.

Alarm

In the main menu, press the NAVIGATION buttons to select
Alarm option. Press the ENTER button to confirm.

1. Enable: Choose ON to enable a timer alarm choose OFF to

disable timer alarm.

2. Set Time: Set time with hh:mm format for a timer alarm

3. Exit: Select this item to return to main menu
Note 1: When an alarm is triggered, please press STOP button
to disable current alarm. If other buttons are used to stop the
alarm, it will sound again every 9 mins.
Note 2: If ENABLE is set ON, it will be sound every day at the
same time.

Auto Power

In the main menu, press the NAVIGATION buttons to select
Auto-Power option. Press the ENTER button to confirm.

1. Power On Enable: Choose On/Off option to enable/disable

timer power on.

2. Power Off Enable: Choose On/Off option to enable/disable

timer power off.

3. Set Time: Select this item to change time information for auto

power on/off.

4. Exit: select this item to return to main menu.
Note: Timer power on/off means that when the system reaches
the set time, and timer power on/off is enabled, the system will
automatically power on/off if system is in power off/on state.

- 17 -

www.jWIN.com

Digital Photo Frame V10M10_IM_EN_09252007

OPERATIONAL INSTRUCTIONS

Remote Control Operation

• TFT on/off: Press the TFT ON/OFF Button to turn on

backlight of TFT-LCD. Press it again to turn off backlight of

TFT-LCD.

• Speaker: During playback, press the SPEAKER button to

close the speaker or phones output.

• Numeric Keyboard: These buttons are used to input the time,

as well as media file numbers. When a numeric item is

displayed on the screen, press the NUMERIC 0-10+ keys to

select the desired entry and press the ENTER button to

confirm.

• Zoom: During PICTURE playback, press the ZOOM button to

magnify the image as follows:

• Stop: Press the STOP button to stop playback. Press the

PLAY/PAUSE button to resume playback.

• Play/Pause: Press the PLAY/PAUSE button to pause during

playback, press this button again to resume playback.

• Mute: Press the MUTE button, the audio output of the main

unit will be shut off; press this button again or VOL+ / VOL-

button to resume the audio output.

• Vol+ & Vol-: Press the VOL + button to increase the volume.

Press the VOL- button to reduce the volume.

• Next: Press the NEXT button during play to skip a file or

picture ahead.

Prev: Press the PREV button during play to skip a file or

•

picture back forward.

• Standby: Press the STANDBY button to switch the power

between normal work mode and standby mode.

• Display: During playback, press the DISPLAY button to

display the file and time in formation.

- 18 -

www.jWIN.com

Digital Photo Frame V10M10_IM_EN_09252007

OPERATIONAL INSTRUCTIONS

Remote Control Operation- continued

• Menu: Press the MENU button during playback to return the

main menu.

• Subtitle: Press the SUBTITLE button repeatedly to select

subtitle languages or control subtitle on/off.
Note: This function is media specific.

• L/R: During playback, press the L/R button to select

Left/right/stereo channel mode.

Note: This function is media specific.

• Repeat: Press the REPEAT button to select and Repeat

Single, Repeat All and Repeat Off.

• Setup: Select the setup option to display setup menu. Press

the NAVIGATION buttons to select the desired item. Then

press NAVIGATION buttons, the sub-options for each item

will appear on the right side of the screen.

• Navigation (): Press the NAVIGATION buttons to

select the desired items or rotate the picture during picture

playback.

• Enter: Press this button to confirm selection.

• Function: Press the FUNCTION button once for the main

menu to appear on the display screen.

• Rev: Press the REV button during normal playback of video

or audio files. The playback speed will cycle with each press

as: X2, X4, X8, X16, X32, Normal. Press the PLAY button to

resume normal playback.

• Fwd: Press the FWD button during normal playback of video

or audio files. The playback speed will cycle with each press

as: X2, X4, X8, X16, X32, Normal. Press the PLAY button to

resume normal playback.

- 19 -

www.jWIN.com

Digital Photo Frame V10M10_IM_EN_09252007

OPERATIONAL INSTRUCTIONS

Remote Control Operation- continued

• CLOCK: Display the clock on the screen.

• CALENDAR: Display the calendar on the screen.

• USB: Display photos directly from USB or change priority of

media type selection.

• CARD: Display photos directly from a memory card or

change priority of media type selection.

Cleaning the Unit

Power the unit OFF before attempting to clean the unit.

Cleaning the Screen

Wipe with a clean, soft, lint-free cloth to remove dust. If
necessary, apply a small amount of ammonia-free, alcohol-free
glass cleaner to the cloth.

Cleaning the Casing and Frame

Use a soft dry cloth. If necessary, apply a small amount of
ammonia-free, alcohol-free cleaner to the cloth.

CAUTION: Alcohol and ammonia-based cleaners may damage
the product.

- 20 -

www.jWIN.com

Digital Photo Frame V10M10_IM_EN_09252007

TROUBLESHOOTING GUIDE

No image is shown

• AC adapter may not be properly connected. Check to see

that connections are correct and secure on the left side of the

unit and in the wall outlet.

• Be sure the unit is turned ON. Slide the ON/OFF switch to the

ON position.

• Files may not be in JPEG format. This unit only supports

JPEG files.

• Memory card is not inserted. Insert memory card.

• Memory card may not be supported by this unit. Use only SD,

MMC, MS cards. Use of different may cause damage to the

card of to this unit.

• File may not be on memory card. Make sure image is saved

to memory card and re-insert card.

Image is distorted

• Actual image may be distorted. View image on your computer

to see if it is a distorted image.

Image is inverted

• Image is upside down or sideways. Press the NAVIGATION

[] button repeatedly to rotate the image.

No Sound

• There may be no music file in the USB or Card. Check the

source.

• This Unit only supports MP3 digital audio files.

• The Volume may be turned down. Increase the sound level

using the VOL +/- Buttons on the unit or remote control.

- 21 -

www.jWIN.com

Digital Photo Frame V10M10_IM_EN_09252007

SPECIFICATIONS

• Solution: Cheertek 952A

• LCD Panel

o Resolution:480 (RGB) x 234

o TV System: NTSC / PAL

o Aspect Ratio: 4:3, 16:9, Letterbox

o Diagonal Size: 7”

o Viewing Angles: L/R: 50° Up: 30° Dn: 50°

2

o Brightness (cd/m

o Contrast Ratio: 400:1

• Audio Output Power

o Maximum output: 1W x 2

• Inputs & Outputs

): 150

3.5mm Stereo Headphone Jack
Power Adapter (DC) Input Jack
AV out

• Memory Card Type

o SD, MMC, and MS

o USB2.0 host

• Power Sources

o AC Power Adapter

 Input (AC): 100-240V 50/60Hz 0.6A Max.
 Output (DC): 12V 1.5A

• Power Consumption: 12W

- 22 -

www.jWIN.com

TEL: [phone]
FAX: [phone]

website: www.jWIN.com

© 2007 jWIN Electronics Corp. All rights reserved. No
portion of this printed material or product enclosed
herewith including design, shape and graphics, may be
reproduced or transmitted in any form without the
expressed written consent of jWIN Electronics Corp. by
any means, electronic or mechanical, including
photocopying, recording or use of an information
storage and retrieval system. Any unauthorized
distribution or reproduction of this printed material or
product, or any portion thereof, will be prosecuted to
the fullest possible extent of the law.