jWIN 8-Channel Quad Splitter JV-TV5020, JV-TV5020 User Manual
CUSTOMER SERVICE INFORMATION
JWIN New York Office 51-41 59th Pl.,
Woodside, NY 11377 USA
Toll Free Number: 1-866-807-JWIN
E-mail: custservice@jwin.com
JV-TV5020
USER’S MANUAL
8-CHANNEL QUAD SPLITTER
JV-TV5020 USER’S MANUAL JV-TV5020
USER’S MANUAL
8-CHANNEL QUAD SPLITTER 8-CHANNEL QUAD SPLITTER
CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT
REMOVE COVER (OR BACK). NO USER-SERVICEABLE
PARTS INSIDE, REFER FOR SERVICE TO QUALIFIED
SERVICE PERSONNEL.
The lightning flash with arrowhead symbol, within an equatorial
triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure
that may be of sufficient magnitude to constitute a risk of
electric shock to persons.
The exclamation point within an equilateral triangle is intended
to alert the user to the presence of important operating and
maintenance (servicing) instructions in the literature
accompanying the appliance.
THE GRAPHIC SYMBOLS WITH SUPPLEMENTAL MARKING IS
APPLIED ON THE REAR SIDE OF THE SUBJECT MONITOR.
WARNING : To prevent fire or shock hazard, do not expose this appliance
to rain, water, wet locations. Do not insert any metallic object
through ventilation grilles
.
MPORTANT SAFETY INSTRUCTIONS
This video monitor equipment is provided with a polarized alternating-
current line plug (a plug having one blade wider than the other). This plug
will fit into the power outlet only one way. This is a safety feature. If you are
unable to insert the plug fully into the outlet, try reversing the plug. If the
plug should still fail to fit, contact your electrician to replace your obsolete
outlet. Do not defeat the safety purpose of the polarized plug.
6-2. Other Keys
① FREEZE : Enables selected channel freezes in QUAD mode,
FULL mode, MODE function.
② 1 ~ 8 : Enables selected channel be displayed in full screen.
③ ARROWS : Works only in the menu screen.
④ ENTER : An editing mode on the menu screen.
⑤ PAGE : PAGE A, PAGE B change function.
7. TROUBLESHOOTING
If the system does not function properly, check following points before
contacting the service center.
No Problem Possible Solutions
1 No Video
● Verify power to all pieces of equipment in
the system.
● Verify that the power switches are in the
ON
position.
● Verify that the cameras are properly
hooked up.
2
Video,
But no control
● Turn the power OFF for 30 seconds and
then turn it ON again.
RISK OF ELECTRIC SHOCK DO NOT OPEN
CAUTION
JV-TV5020 USER’S MANUAL JV-TV5020
USER’S MANUAL
8-CHANNEL QUAD SPLITTER 8-CHANNEL QUAD SPLITTER
Fig. 10 Remote Control
6-1. Function select keys.
ZOOM MODE : 2X Zoom Mode
QUAD MODE : It makes you to select the Quad Mode .
V C R MODE : The Screen comes to VCR mode.
. AUTO MODE : Displays each channel sequentially.
INDEX
SECTION 1
1. PURPOSE OF THIS PRODUCT 1
2. SPECIFICATIONS 2
SECTION 2
3. CONNECTIONS 3
4. INSTALLATION
5
4-1. Basic System Installation 5
4-2. Installation with a VCR or Time Lapse Recorder 6
SECTION 3
5. OPERATION
8
5-1. Change Display Mode 8
5-2. QUAD Mode Operation 10
5-3. Automatic Camera Skip in the Auto Mode 11
5-4. Manual Mode Operation 11
5-5. How to Program the Menus for On-Screen-Display
11
5-6. Recording and Playback 18
6. IR REMOTE CONTROL 18
6-1 Function Selection Keys
19
6-2 Other Keys 20
7. TROUBLESHOOTING 20
Z
19
20
REMOTE CONTROL UNIT
UP
LEFT ENTER RIGHT MENU
DOWN
Z
FREEZE
PAGE
JV-TV5020 USER’S MANUAL JV-TV5020
USER’S MANUAL
8-CHANNEL QUAD SPLITTER 8-CHANNEL QUAD SPLITTER
SECTION 1
1. PURPOSE OF THIS PRODUCT
The purpose of this COLOR QUAD SPLITTER is to provide an
economical, but effective method to monitor more than one area with video
cameras. This Splitter has following features to enable the users to get the
best for their money and efforts:
z Accepts NTSC.
z NTSC : 720x480 Pixels.
z Real time quad picture display.
z PIP (Picture-In-Picture) function.
z 2x ZOOM with Vertical and Horizontal interpolation.
z Full-screen display of one camera.
z Four-position sequential switcher.
z Programmable dwell times to include cameras and the quad
display in the sequential switching mode.
z On-screen-display and programmable menus.
z User-programmed data is protected battery back up.
z Freeze capability can freeze a picture.
Program selectable border line.
5-6. Recording and Playback
There are two video output ports on the rear of the splitter. One
of them is MON port which is for output of the Quadrant pictures
and sequential pictures.
Read the specifications for Time Lapse Recorder or VCR
thoroughly before doing this step, because its manufacturer uses
different methods to record.
a. To record, connect a coaxial cable to the AUDIO IN and VIDEO
IN/OUT port on the rear of the monitor and connect the other
end of the coaxial cable to the VIDEO IN/OUT port on the VCR.
b. Press the “REC” button on the VCR.
c. To play, press the AUTO button of the monitor until it goes to
the VCR mode with black screen and beeping sound.
d. Press the “PLAY” button on the VCR.
e. The recorded picture will be displayed on the monitor.
When you are operating the normal VCR, make sure that the
VCR is in line or A/V mode.
6. IR REMOTE CONTROL
This color quad splitter is also operated by IR Remote Controller.
1
Loading...