JVC SP-PWC3, XV-THC3, SP-THC3S, SP-THC3F, SP-THC3C User Manual

DVD DIGITAL CINEMA SYSTEM

TH-C3

Consists of XV-THC3, SP-PWC3, SP-THC3F, SP-THC3C and SP-THC3S

INSTRUCTIONS

GVT0150-003A

[B]

Warnings, Cautions and Others

IMPORTANT for the U.K.

DO NOT cut off the mains plug from this equipment. If the
plug fitted is not suitable for the power points in your home or
the cable is too short to reach a power point, then obtain an
appropriate safety approved extension lead or consult your
dealer.

BE SURE to replace the fuse only with an identical approved
type, as originally fitted.

If nonetheless the mains plug is cut off ensure to remove the
fuse and dispose of the plug immediately, to avoid a possible
shock hazard by inadvertent connection to the mains supply.

If this product is not supplied fitted with a mains plug then
follow the instructions given below:

IMPORTANT.

DO NOT make any connection to the terminal which is
marked with the letter E or by the safety earth symbol or
coloured green or green-and-yellow.

The wires in the mains lead on this product are coloured in
accordance with the following code:

Blue: Neutral
Brown: Live

As these colours may not correspond with the coloured
markings identifying the terminals in your plug proceed as
follows:

The wire which is coloured blue must be connected to the
terminal which is marked with the letter N or coloured black.

The wire which is coloured brown must be connected to the
terminal which is marked with the letter L or coloured red.

IF IN DOUBT - CONSULT A COMPETENT ELECTRICIAN.

CAUTION

To reduce the risk of electrical shocks, fire, etc.:

1. Do not remove screws, covers or cabinet.

2. Do not expose this appliance to rain or moisture.

CAUTION — button!
(XV-THC3)

Disconnect the mains plug to shut the power off completely
(the STANDBY lamp goes off).
The button in any position does not disconnect the mains
line.

• When the system is on standby, the STANDBY lamp lights
red.

• When the system is turned on, the STANDBY lamp goes off.

The power can be remote controlled

CAUTION (SP-PWC3)

The power supply to the subwoofer is linked to the center unit.
The POWER ON lamp on the subwoofer lights green when the
power is turned on.

CAUTION

• Do not block the ventilation openings or holes.
(If the ventilation openings or holes are blocked by a
newspaper or cloth, etc., the heat may not be able to get out.)

• Do not place any naked flame sources, such as lighted
candles, on the apparatus.

• When discarding batteries, environmental problems must be
considered and local rules or laws governing the disposal of
these batteries must be followed strictly.

• Do not expose this apparatus to rain, moisture, dripping or
splashing and that no objects filled with liquids, such as
vases, shall be placed on the apparatus.

IMPORTANT FOR LASER PRODUCTS

1. CLASS 1 LASER PRODUCT

2.

CAUTION: Do not open the top cover. There are no user

serviceable parts inside the unit; leave all servicing to qualified
service personnel.

3.

CAUTION: Visible and invisible laser radiation when open and

interlock failed or defeated. Avoid direct exposure to beam.

4. REPRODUCTION OF LABEL: CAUTION LABEL,
PLACED INSIDE THE UNIT.

G-1

Warnings, Cautions and Others

Caution: Proper Ventilation

To avoid risk of electric shock and fire and to protect from damage, place the apparatus on a level surface. The minimal clearances are
shown below:

Wall or

obstructions

obstructions

XV-THC3

3 cm 3 cm

Wall or

SP-PWC3

15 cm 15 cm

8 cm

20 cm

XV-THC3

Front

DISC 5DISC 4DISC 3DISC 2DISC 1

No

15 cm

obstructions

Front

No
obstructions

SP-PWC3

Wall or obstructions

10 cm

Wall or obstructions

15 cm

SAFETY INSTRUCTIONS

“SOME DOS AND DON’TS ON THE SAFE USE OF EQUIPMENT”

This equipment has been designed and manufactured to meet international safety standards but, like any electrical equipment, care must be
taken if you are to obtain the best results and safety is to be assured.

Do read the operating instructions before you attempt to use the equipment.

Do ensure that all electrical connections (including the mains plug, extension leads and interconnections between pieces of equipment) are
properly made and in accordance with the manufacturer’s instructions. Switch off and withdraw the mains plug when making or changing
connections.

Do consult your dealer if you are ever in doubt about the installation, operation or safety of your equipment.

Do be careful with glass panels or doors on equipment.

DON’T continue to operate the equipment if you are in any doubt about it working normally, or if it is damaged in any way — switch off,
withdraw the mains plug and consult your dealer.

DON’T remove any fixed cover as this may expose dangerous voltages.

DON’T leave equipment switched on when it is unattended unless it is specifically stated that it is designed for unattended operation or has
a standby mode.
Switch off using the switch on the equipment and make sure that your family know how to do this.
Special arrangements may need to be made for infirm or handicapped people.

DON’T use equipment such as personal stereos or radios so that you are distracted from the requirements of traffic safety. It is illegal to
watch television whilst driving.

DON’T listen to headphones at high volume as such use can permanently damage your hearing.

DON’T obstruct the ventilation of the equipment, for example with curtains or soft furnishings.
Overheating will cause damage and shorten the life of the equipment.

DON’T use makeshift stands and NEVER fix legs with wood screws — to ensure complete safety always fit the manufacturer’s approved
stand or legs with the fixings provided according to the instructions.

DON’T allow electrical equipment to be exposed to rain or moisture.

ABOVE ALL

— NEVER let anyone, especially children, push anything into holes, slots or any other opening in the case — this could result in a fatal

electrical shock.;

— NEVER guess or take chances with electrical equipment of any kind — it is better to be safe than sorry!

E43486-340B

G-2

Table of contents

Introduction ..................................... 2

Notes on handling .................................................................2

Supplied accessories ............................................................2

About discs ..................................... 3

Playable disc types ...............................................................3

Notes on file types ................................................................3

Description of parts and controls ... 4

Connections ....................................7

Connecting the FM and AM (MW) antennas .........................7

Connecting the satellite (front, center, surround) speakers ..... 8

Speaker layout ......................................................................9

Connecting a TV ....................................................................9

Connecting the powered subwoofer ....................................10

Connecting to an analog component ...................................10

Connecting to a digital component .....................................10

Connecting the power cord .................................................10

Operating external components with

the remote control ........................11

Operating the TV .................................................................11

Operating the VCR ..............................................................12

Basic operations ...........................13

Turning the system on/off ...................................................13

Selecting the source to play ................................................14

Adjusting the volume [VOLUME] ........................................14

Listening with headphones (not supplied) ..........................14

Turning off the sound temporarily [MUTING] .....................14

Adjusting the brightness of the indications [DIMMER] .......14

Sleep Timer [SLEEP] ...........................................................15

Adjusting the output level of the subwoofer and speakers ..15

Adjusting the treble sound [TREBLE] ..................................15

Adjusting the bass sound [BASS] .......................................15

Changing the scan mode ....................................................15

Optimizing the speaker settings [Smart Surround Setup] ...16

Playback ........................................ 17

Basic playback ....................................................................17

One Touch Replay ...............................................................19

Fast-forward/fast-reverse search ........................................19

Skip to the beginning of a desired selection .......................19

Locating a desired title/group using number buttons .........20

Playing back a bonus group ................................................20

Selecting the desired title/playlist from the control display .20

Advanced operations .................... 21

Using the surround mode ...................................................21

Using the on-screen bar .....................................................22

Playing from a specified position on a disc .........................24

Using the file control display ..............................................25

Resume Playback ...............................................................26

Selecting a view angle .........................................................26

Selecting the subtitle ..........................................................26

Selecting the audio .............................................................27

Special picture playback .....................................................27

Program Playback ...............................................................29

Random Playback ...............................................................29

Repeat Playback .................................................................30

Tray lock .............................................................................31

Sound settings ....................................................................31

Setting DVD preferences .............. 32

Using the setup menus .......................................................32

Menu description ................................................................32

Tuner operations ........................... 35

Manual tuning .....................................................................35

Preset tuning ......................................................................35

Selecting the FM reception mode ........................................36

Reducing the noise of AM (MW) broadcast ........................36

Using the RDS (Radio Data System) when receiving FM

stations ...............................................................................36

References .................................... 39

Maintenance .......................................................................39

Troubleshooting ..................................................................39

Specifications .....................................................................40

1

Introduction

Notes on handling

7 Important cautions

Installation of the system

• Select a place which is level, dry and neither too hot nor too cold;
between 5°C and 35°C.

• Leave sufficient distance between the system and the TV.

• Do not use the system in a place subject to vibration.

Power cord

• Do not handle the power cord with wet hands!

• A small amount of power is always consumed while the power
cord is connected to the wall outlet (center unit only).

• When unplugging the power cord from the wall outlet, always
pull on the plug, not the power cord.

To prevent malfunctions of the system

• There are no user-serviceable parts inside. If anything goes
wrong, unplug the power cord and consult your dealer.

• Do not insert any metallic object into the system.

• Do not use any non-standard shape disc (like a heart, flower or
credit card, etc.) available on the market, because it may damage
the system.

• Do not use a disc with tape, stickers, or paste on it, because it
may damage the system.

7 Safety precautions

Avoid moisture, water and dust

Do not place the system in moist or dusty places.

Avoid high temperatures

Do not expose the system to direct sunlight and do not place it near
a heating device.

When you are away

When away on travel or for other reasons for an extended period of
time, disconnect the power cord plugs from the wall outlet.

Do not block the vents

Blocking the vents may damage the system.

Care of the cabinet

When cleaning the system, use a soft cloth and follow the relevant
instructions on the use of chemically-coated cloths. Do not use
benzene, thinner or other organic solvents including disinfectants.
These may cause deformation or discoloring.

If water gets inside the system

Turn the system off and disconnect the power cord plug from the
wall outlet, then call the store where you made your purchase.
Using the system in this condition may cause fire or electrical
shock.

Label sticker

Sticker

Paste

Note about copyright laws

Check the copyright laws in your country before recording from the
discs. Recording of copyrighted material may infringe copyright
laws.

Note about copyguard system

The discs are protected by copyguard system. When you connect
the system to your VCR directly, the copyguard system activates
and the picture may not be played back correctly.

Supplied accessories

Check to be sure you have all of the supplied accessories.
The number in parentheses is the quantity of the pieces supplied.
If anything is missing, contact your dealer immediately.

• Remote control (1)

• Batteries (2)

• FM antenna (1)

• AM loop antenna (1)

• Power cord (1)

• System cord (1)

• Core filter (1)

2

About discs

Playable disc types

This system has been designed to play back the following discs:

DVD VIDEO DVD AUDIO

VCD/SVCD Audio CD

• DVD Logo is a trademark of DVD Format/Logo Licensing
Corporation.

• The Non-DVD side of a “DualDisc” does not comply with the
“Compact Disc Digital Audio” standard. Therefore, the use of
Non-DVD side of a DualDisc on this product may not be
recommended.

• This system accommodates the PAL system, and also can play
discs recorded with NTSC system. Note that an NTSC video
signal on a disc is converted to the PAL60 signal and output.

• On some DVD VIDEOs, DVD AUDIOs, VCDs or SVCDs, their
actual operation may be different from what is explained in this
manual. This is due to the disc programming and disc structure,
not a malfunction of this system.

• Before playing back discs, read their instructions or cautions
carefully.

Region code of DVD VIDEO

This system can play back DVD VIDEO discs whose Region Code
numbers include the system’s Region Code, which is indicated on
the rear panel.

Example of playable DVD:

3

ALL

2

52

2

5

4

If a DVD with an improper Region Code number is loaded,
“REGION CODE ERROR!” appears on the TV screen and
playback cannot start.

Notes on DVD-R, DVD-RW and DVD-RAM

• This system can also play finalized DVD-Rs or DVD-RWs
recorded in DVD VIDEO format and DVD-RWs or DVD-RAMs
recorded in DVD VR format.

• This system can also play DVD-Rs or DVD-RWs if MP3, WMA,
and JPEG files are recorded on them with UDF Bridge format.
This system does not support “multi-border” discs.

Notes on CD-R and CD-RW

• This system can also play CD-Rs or CD-RWs if MP3, WMA and
JPEG files are recorded on them with ISO 9660 format.

• This system supports “multi-session” discs (up to 20 sessions).

• This system cannot play “packet write” discs.

Some discs may not be played back because of their disc
characteristics, recording conditions, or damage or stain on them.

Unplayable discs:

SACD, CD-I (CD-I Ready), Photo CD, etc.
Playing back these discs will generate noise and damage the
speakers.

Notes on file types

For all playable files

• The system can only recognize and play files with one of the
following extensions, which can be in any combination of upper
and lower case;
MP3: “.MP3”, “.mp3”
WMA: “.WMA” , “.wma”
JPEG: “.JPG”, “.JPEG”, “.jpg”, “.jpeg”

• The system recognizes up to 150 tracks (files) per group, 99
groups per disc, and the total number of the tracks (files) that the
system can play is 4000.

• Some files may not be played back normally because of their disc
characteristics or recording conditions.

For MP3/WMA files

• The system supports MP3/WMA files recorded with a bit rate of
32 – 320 kbps and a sampling frequency of 16 kHz, 22.05 kHz,
24 kHz*, 32 kHz, 44.1 kHz, or 48 kHz.

• If the tag information (album name, artist, and track title, etc.) is
recorded on a disc, it appears in the file control display on the TV
screen. (A pg. 25)

• We recommend to record each piece of material (song) at a
sample rate of 44.1 kHz and at a data transfer rate of
128 (96*) kbps.
* For WMA only

For JPEG files

• We recommend to record a file at 640 x 480 resolution.

• This system can only play baseline JPEG files.

This product incorporates copyright protection technology
that is protected by U.S. patents and other intellectual
property rights. Use of this copyright protection technology
must be authorized by Macrovision, and is intended for
home and other limited viewing uses only unless otherwise
authorized by Macrovision. Reverse engineering or
disassembly is prohibited.

3

“CONSUMERS SHOULD NOTE THAT NOT ALL HIGH
DEFINITION TELEVISION SETS ARE FULLY COMPATIBLE
WITH THIS PRODUCT AND MAY CAUSE ARTIFACTS TO BE
DISPLAYED IN THE PICTURE. IN CASE OF 525 OR 625
PROGRESSIVE SCAN PICTURE PROBLEMS, IT IS
RECOMMENDED THAT THE USER SWITCH THE
CONNECTION TO THE ‘STANDARD DEFINITION’ OUTPUT.
IF THERE ARE QUESTIONS REGARDING OUR TV SET
COMPATIBILITY WITH THIS MODEL 525p AND 625p DVD
PLAYER, PLEASE CONTACT OUR CUSTOMER SERVICE
CENTER.”

Description of parts and controls

Front panel (center unit)

Display window

pg. 19

pg. 22

pg. 35

pg. 35

pg. 18

pg. 22

FM AM

P L PCM SURR

WMA

MP3 RESUME

PROGRESSIVE B.S.P. CHAP. TRK PG PL BONUS ST RDS TA NEWS INFO PRG RND DISC ALL

pg. 15

pg. 26

pg. 28

pg. 18

CH

pg. 18

pg. 18

pg. 18

pg. 20

pg. 35

MONO

pg. 35

pg. 36

pg. 17

pg. 17

pg. 17

Disc tray (inside): pg. 17

pg. 13

pg. 17

pg. 13

Remote sensor:

MHz
kHz

pg. 29

pg. 29

pg. 19

//

pg. 6

pg. 30

pg. 14

SOURCETUNING

pg. 14

DISC 5DISC 4DISC 3DISC 2DISC 1

pg. 14

Rear panel (center unit)

pg. 10

pg. 10

AUX IN

pg. 10

pg. 9

pg. 7

pg. 9

AV

AV

pg. 10

4

Description of parts and controls

Powered subwoofer

SP-PWC3

pg. 10

pg. 8

POWER ON lamp:

pg. 13

Front

NOTE

• For safety reasons, always ensure that there is sufficient space behind the powered subwoofer.

CAUTION:
SPEAKER IMPEDANCE

Ω16Ω

4

Rear

Power cor d:

pg. 10

* Do not block the ventilation openings.

5

Description of parts and controls

TV/VIDEO

TOP MENU/PG

REC

MENU/PL

PTY SEARCH

ON

SCREEN

DVD

MUTING

FM/AM AUX

TV

TV VOL CHANNEL AUDIO VOL

TUNING

TA/NEWS/INFO

F AUDIO

VCR

TV SOUND

AUDIO

VCR

TV

TUNING

FM MODEMEMORY

ENTER

TITLE/GROUP

AUDIO

VFP

SUBTITLE

ANGLE

PAG E

SET UP

SURROUND

FRONT L FRONT R

LEVEL

S.WFR

TV RETURN

REPEAT

SETTING

SMART

S.SETUP

CENTER

PLAY MODE

ZOOM

FL DISPLAY DIMMER SLEEP RETURN

100+

CANCEL

SCAN MODE

TREBLE

BASS

SURR. RSURR. L

SLOW SLOW

DISC 1

DISC 3

DISC 2

DISC 4 DISC 5

p

Remote control Putting batteries in the remote control

pg. 11

pg. 11

pg. 17

pg. 14

pg. 11

pg. 11

pg. 17,

pg. 20,

pg. 15,

g. 12,

pg. 20

pg. 27

pg. 26

pg. 26

pg. 28

pg. 30
pg. 32

pg. 31
pg. 38
pg. 14

pg. 18
pg. 22
pg. 16

35

32

19

24

pg. 13

pg. 12

pg. 14

R6P (SUM-3)/AA (15F)

type dry-cell batteries

(supplied)

pg. 14

pg. 11 – 38

pg. 17
pg. 19, 35

pg. 19, 27

pg. 17, 36
pg. 20, 24

If the range or effectiveness of the remote control decreases,
replace both batteries.

pg. 22

CAUTION

• Do not expose batteries to heat or flame.

Operating the system from the remote

Number
buttons:

pg. 19

pg. 29
pg. 29

pg. 15, 28
pg. 28

pg. 37
pg. 15

pg. 24

pg. 15

control

Aim the remote control directly to the front panel of the center unit.

• Do not hide the remote sensor.

pg. 15

NOTE

• To use the buttons
under the cove r, slide
down the cover.

6

Connections

Connecting the FM and
AM (MW) antennas

7 AM (MW) loop antenna

Setting up supplied AM loop antenna

Do not connect the power cord until all other connections have been made.

If reception is poor

Center unit

AM (MW) loop

antenna

Outdoor single vinyl-covered wire antenna
(not supplied)

If the antenna cord is covered with the insulation
coat, twist and pull the insulation coat off and
remove.

Connecting AM (MW) loop antenna

1

Center unit

2

Antenna cord

3

7 FM antenna

Center unit

If reception is poor

Center unit

Standard type (75 C
coaxial) connector

NOTE

• We recommend that you use coaxial cable for the FM antenna as it is
well-shielded against interference.

FM antenna (supplied)

Extend the supplied FM antenna
horizontally.

Outdoor FM antenna

(not supplied)

Outdoor FM antenna cord

(not supplied)

• Turn the loop antenna until you have the best reception during
AM (MW) broadcast program reception.

NOTE

• Make sure the antenna conductors do not touch any other terminals,
connecting cords and power cords. This could cause poor reception.

7

Connections

Connecting the satellite
(front, center, surround)
speakers

Before connecting the speaker cords;

Twist and pull the insulation coat off and remove.

Do not connect the power cord until all other connections have been made.

Powered subwoofer

SP-PWC3

FROM
XV-THC3
XV-THS55
XV-THS58
XV-THS66

4Ω16

Ω

Front speakers

SP-THC3F

Speaker cord

• Connect the black cords to the black (r) terminals.

• Connect the white cords to the (q) terminals

referring to the table below:

FRONT SPEAKERS (LEFT) White

FRONT SPEAKERS (RIGHT) Red

CENTER SPEAKER Green

SURROUND SPEAKERS (LEFT) Blue

SURROUND SPEAKERS (RIGHT) Gray

Surround speakers

SP-THC3S

Center speaker

SP-THC3C

CAUTION

• When you connect speakers other than the supplied ones, use
speakers of the same speaker impedance (SPEAKER IMPEDANCE)
indicated near the speaker terminals on the rear of the powered
subwoofer.

• DO NOT connect more than one speaker to one speaker terminal.

• Be sure to have them installed on the wall by a qualified
personnel.

• DO NOT install the satellite speakers on the wall by yourself to
avoid unexpected damage from their falling off the wall due to
incorrect installation or weakness in wall structure.

• Care must be taken in selecting a location for speaker installation

on a wall. Injury to personnel or damage to equipment may result
if the speakers installed interfere with daily activities.

Precautions for daily use

• When moving the speakers, do not pull the speaker cords;
otherwise, the speakers may fall over, causing damage or injury.

• When holding a speaker, always grasp the lower portion.

• Do not lean against the speakers, as the speakers could fall down
or break, possibly causing an injury. Especially be careful that
children do not lean against them.

8

Connections

Do not connect the power cord until all other connections have been made.

Speaker layout

Center speaker

Front left

speaker

Surround left

speaker

• Place the satellite speakers on a flat and level surface.

• The front and center speakers are magn etically shielded to avoid color
distortions on TVs. However, if not installed properly, they may
cause color distortions. So, pay attention to the following when
installing the speakers.
– When placing the speakers near a TV set, turn off the TV’s main

power switch or unplug it before installing the speakers. Then wait
at least 30 minutes before turning on the TV’s main power switch

again.
Some TVs may still be affected even though you have followed the
above. If this happens, move the speakers away from the TV.

• The surround speakers are not magnetically shielded.
If it is located nearby the TV or monitor, it will probably cause
color distortion on the screen. To avoid this, do not place the
speaker nearby the TV or monitor.

• Be sure to place the powered subwoofer to the TV’s right. If you place
the powered subwoofer to the TV’s left, keep sufficient distance
between them to prevent the TV screen from appearing mottled.

Front right
speaker

Powered
subwoofer

Surround right
speaker

Connecting a TV

• Distortion of picture may occur when connecting to the TV via a
VCR, or to a TV with a built-in VCR.

• You need to set “MONITOR TYPE” in the PICTURE menu
correctly according to the aspect ratio of your TV. (A pg. 33)

7 To connect a TV equipped with the component video

input jacks

Center unit

To component

video input

Component video cord (not supplied)

NOTE

• If your TV supports progressive video input, you can enjoy a high
quality picture by setting the progressive scan mode to active.
(A pg. 15)

• If the component video input jacks of your TV are of the BNC type,
use a plug adapter (not supplied) to convert the pin plugs to BNC
plugs.

• The component video signals can be output only when you select
“DVD” as the source to play. (A pg. 14)

7 To connect a TV with the SCART connector

Center unit

AV

To SCART
connector

TV

TV

*

SCART cable (not supplied)

* Some TV’s SCART connectors output audio signal. In such a

case, you can enjoy the TV sound through this system.

NOTE

• No sound signal comes out from “AV” (SCART) connector.

• Select the appropriate scan mode according to your TV. See
“Changing the scan mode” (A pg. 15).

9

Connections

Do not connect the power cord until all other connections have been made.

Connecting the powered
subwoofer

Powered

Center unit

Align the 5 marks.

NOTE

• The way of connecting the system cord varies depending on the type
of the powered subwoofer.

System cord
(supplied)

Align the 5 marks.

subwoofer

or

Connecting to an analog
component

You can enjoy the sound of an analog component.

Center unit

Connecting to a digital
component

You can enjoy the sound of a digital component.

Center unit

* tuner

DBS

MD player

* DBS = Direct Broadcasting Satellite

NOTE

When playing a video component such as a DBS tuner;

• To listen to the sound, select “AUX D” as the source to play.

(A pg. 14)

• To see the picture, connect the video output jack of the component to
the video input jack of the TV directly, and select the correct input
mode on the TV.

To digital optical output

Digital optical cord (not supplied)

Connecting the power
cord

RCA pin plug cord
(not supplied)

To audio output

VCR

TV

Cassette recorder

NOTE

• If you connect a sound-enhancing device such as a graphic equalizer
between the source components and this system, the sound output
through this system may be distorted.

• When playing a video component such as a VCR;

• To listen to the sound, select “AUX” as the source to play.

(A pg. 14)

• To see the picture, connect the video output jack of the component

to the video input jack of the TV directly, and select the correct
input mode on the TV.

Make sure that all other connections have been completed.

Center unit Powered

Power cord

(Supplied)

Plug into AC outlets.

CAUTION

• Disconnect the power cord before cleaning or moving the system.

• Do not pull on the power cord to unplug the cord. When unplugging
the cord, always grasp and pull the plug so as not to damage the cord.

subwoofer

Power cord

10

Operating external components with the remote control

TV/VIDEO

REC

TV

TV VOL CHANNEL

VCR

VCR

TV

ENTER

TV RETURN

100+

The buttons described below are used on pages 11 and

12.

Remote control
mode selector

(play button)

Number
buttons

4 Press number buttons (1-9, 0) to enter

the manufacturer’s code (2 digits).

Examples:
For a Hitachi TV:

Press 0, then 7.

For a Toshiba TV:

Press 2, then 9.

Manufac­turer

JVC 01 Nordmende 13, 14, 18, 26 – 28

Akai 02, 05 Okano 09

Blaupunkt 03 Orion 15

Daewoo 10, 31, 32 Panasonic 16, 17

Fenner 04, 31, 32 Philips 10

Fisher 05 Saba 13, 14, 18, 26 – 28

Grundig 06 Sanyo 05

Hitachi 07, 08 Schneider 02, 05

Inno-Hit 09 Sharp 20

Irradio 02, 05 Sony 21 – 25

Magnavox 10 Telefunken 13, 14, 18, 26 – 28

Mitsubishi 11, 33 Thomson

Miver 03 Toshiba 29

Nokia 12, 34

Code

Manufactur­er

Code

13, 14, 18,
26–28, 30

NOTE

• Manufacturers’ codes are subject to change without notice.

• Set the codes again after replacing the batteries of the remote control.

Operating the TV

7 To set the manufacturer’s code

You can operate a JVC TV without setting the manufacturer’s code.

1 Slide the remote control mode selector

to TV.

2 Press and hold TV.

Keep the button pressed until step 4 is finished.

3 Press ENTER.

5 Release TV.

If there is more than one code listed for corresponding brand,
try each one until you enter the correct one.

7 Operation

Aim the remote control at the TV.

IMPORTANT

Before using the remote control to operate a TV;

• Set the remote control mode selector to TV.

The following buttons are available:

TV: Turns TV on and off.
TV VOL +/–: Adjusts the volume.
TV/VIDEO: Selects the input mode (either TV or

VIDEO).

CHANNEL +/–: Changes the channels.
1-10, 0, +10 (100+): Selects the channel.
TV RETURN: Alternates between the previously selected

channel and the current channel.

11