JVC XS-N618PBA User Manual

Page 1
PARTY SPEAKER WITH DVD PLAYER
XS-N618PBA
Page 2
Page 3
IMPORTANT SAFETY INSTRUCTIONS...............................................................................1.2
ACCESSORIES / TOP PANEL FUNCTIONS...........................................................................3
FRONT PANEL-CONTROLS AND FUNCTIONS.....................................................................4
TECHNICAL / REAR PANEL FUNCTIONS..............................................................................5
SYSTEM CONNECTION..........................................................................................................6
REMOTE CONTROL FUNCTIONS..........................................................................................7
HOW TO USE BLUETOOTH CONNECTION...........................................................................8
DVD FUNCTIONS....................................................................................................10.11.12.13
FAULT GUIDE.........................................................................................................................14
Page 4
CAUTION
RISK OF ELECTRIC SHOCK, DO NOT OPEN!
The lightning flash with the arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of "uninsulated dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to a person. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the unit.
Safety Precautions
Warning: To prevent fire or electric shock, do not expose this appliance to rain
IMPORTANT SAFEGUARDS
or moisture.
Caution: Please carefully read all of the following imp operation.
1.Read Instructions: All the safety and operating instructions should be read before the appliance is operated.
2.Retain Instructions: The safety and operating instructions should be retained for future reference.
3.Follow Instructions: All operating instructions should be followed.
4.Heed Warnings: All warnings on the unit and the operating instructions should be adhered to.
5.Power Source: The appliance should be connected based on instructions.
6.Heat: Keep the unit away from heat s or other appliances that may radiate heat.
7.Non-Use Periods: The power cord of the unit should be unplugged from the outlet when you do not use
it for a long time.
8.Damage Requiring Service:
The unit should be repaired by qualified service personnel in the following cases: a. The power plug or cable has been damaged; b. Objects have fallen or liquid has been spilled on the appliance; c. The appliance has been exposed to rain; d. The appliance is functioning abnormally.
ources such as radiators,refrigerators,stoves
ortant safeguards to ensure safe
1
Page 5
8. Do not expose batteries to high temperatures (eg. direct sunlight, heat or fire).
2
Page 6
Accessories
Video Cable
REMOTE CONTROL BATTERY
TOP PANEL FUNCTIONS
AUX-in Cable
One Wireless Microphone
Bluetooth Indicator
FM ANTENNA
USB Input
SD Input MIC Input Jack
3
DVD Deck
Page 7
FRONT PANEL-CONTROLS AND FUNCTIONS
VOLUME CONTROL
1 2 3 4 5 6 7 8 9 10 1112 13 14 15 16 17 18 19
IMPORTANT: First press the POWER button to set the unit to Standby mode. After that, you can use the other buttons on the unit or remote control.
1.STANDBY:Standby key, Press this key to turn on the unit or set it to standby.
2.MUTE: Press once for mute mode and then again to cancel mute mode
3.AUX: Set the input source to AUX.
4.B.T: Set the input source to Bluetooth.
5.FM /FM SCAN: Press once to switch to FM mode. Press and hold to start auto-scanning channels.
6.MEDIA, DVD/USB/SD: First press the MEDIA key to switch to DVD/USB/SD mode. Then press the DVD/USB/SD key to switch between DVD, USB and SD inputs.
7. : Previous key
8. : Play/ Pause key
9. : Next key
10.OPEN: DVD open and close door
11.TRE-: Treble decrease key
12.TRE+: Treble increase key
13.BASS-:Bass decrease key
14.BASS+:Bass increase key
15.ECHO-:Echo decrease key
16.ECHO+: Echo increase key
17.MIC VOL-:Volume decrease key for connected microphones.
18.MIC VOL+: Volume increase key for connected microphones.
19.POWER: Press this button to set the device to standby mode (device starts receiving power). The other keys on the unit and remote control are active only when this button is pressed.
4
Page 8
TECHNICAL SPECIFICATIONS
Supported Disc Formats Supported Audio Format
DVD,VCD,CD,MP3-CD MP3 Colour System: PAL/NTSC
Signal Output
Audio System: Audio DAC 24 bit/96KHz Video output: 1Vpp(at 75ohm) Audio output(Stereo): 2Vrms(1KHz,0dB)
Audio Frequency
20Hz20KHz (±3dB)
Response
Signal/Noise Ratio
Audio Distortion
Output terminals
Power input
Product Dimension
Product Net Weight
This player is compatile with:CD-R/ CD-RW/ Photo CD/ VCD/ 8cm Disc/ DVD-R/ DVD+R/ DVD-RW/ DVD+RW Supported media format: MP3/JPEG/Divx/MPEG1 NoteMPEG1 animation file can be played in DVD-RW, but it can not be played in CD-R.
S/N >80dB THD <0.5% @1W output Video(Composite ) output x1 Audio output(Left and Right) x1
AC 220-240V~50Hz 150W(Max.) W34cm x D27.5cm x H104cm
19.8kg
REAR PANEL FUNCTIONS
AUX Input Jack
FM Antenna Jack
DVD Audio Output Jack
Component Output
5
DVD Video Output Jack
Wireless Microphone Switch
Power Input
Page 9
SYSTEM CONNECTION
Caution: Always disconnect the unit from the power when making or changing any connections to avoid risk of electric shock.
Vid eo C on ne ct io n: Choose one of the following two methods to connect to the TV.
1. Composite (AV) Connection
(Y/C R/CB Termi nal)
(Yell ow)(Yell ow)
(Yell ow)
cr
cb
(cb )
y
(Gr een)
VIDEO IN
TV
TV
(Yell ow)
Vid eo Conn ectin g Wire
2. Component (YCbCr) Connection
(Re d) (Re d) (Red )
(Wh ite) (Wh ite)
Please note: Th e co mp on en t ou tp ut t er mi na ls Y /g C /b C /r a re t he s am e as Y, U, an d V.
Audio Output Connection (optional - to play sound through the TV speakers): Connect Audio Out (LR) to the Audio input of the TV to play audio through the TV speakers
TV Aud io Input
R
(Re d)
(Re d)
TV
L
(Wh ite)
(Wh ite)
Audio Input Connection (optional - to play TV sound through the unit speakers): Connect the audio output from the TV to the Audio In (AUX -LR) of the unit to play TV sound through the unit speakers.
(Wh ite)
(Re d)
(AUX-in cable provided)
TV Aud io Output
(3.5mm jack)
TV
OR
(Wh ite)
(Re d)
(4 pin cable - not provided)
(Re d)
(Wh ite)
R
(Re d)
L
(Wh ite)
TV
6
Page 10
REMOTE CONTROL FUNCTIONS
1. STANDBY: Standby key
2. MEDIA: Press this key if you want to use DVD,
STAND BY
AUX
TRE+BASS
TRE-BASS
-
ECHO
SETU P
TITL E
REPE AT
1 2
5
9
PAL/N TSC
RM-SX SN 61 8P
MEDI A
BT
RETU RN
A
6
0
FM SCA N
DVD/ USB/ SD
FM
+
MIC
MIC
ENTE R
SUBT ITLE LANG UAGE
L/R/ ST
B
3
7 8
+
10
MEMO RY
+
OPEN /CLOS E
OSD
VOL
VOL
ECHO
MENU
PROG
4
TIME
MUTE
USB or SD input.
3. DVD/USB/SD: Switch between DVD, USB and SD modes.
4. OPEN/CLOSE: open or close key
5. AUX: AUX input key
6. BT: Bluetooth input key
+
7. FM:FM radio input
8. OSD: on screen display key
9. TRE+: Treble increase key
10.TRE-: Treble decrease key
+
11. BASS+: Bass increase key
12. BASS-: Bass decrease key
13. MIC+: Mic increase key
14. MIC-: Mic decrease key
15. VOL+: Volume increase key
16. VOL-: Volume decrease key
17. ECHO-: Echo decrease key
18. ECHO+: Echo increase key : up key
19. : down key
20.
P B C
: left key
21. : right key
22.
23. ENTER: enter key
24. SETUP: System setup button
25. MENU/PBC: Open the menu/ playback control
26. TITLE: title key
27. RETURN: return key
28. SUBTITLE:subtitle key
29. LANGUAGE: Language/audio change key
30. REPEAT: repeat key
31. A-B: a-b repeat key
32. L/R: Left/right channel select key
33. PROG: prog key
34. 1.2.3.4.5.6.7.8.9.0.10.10+: numerical key
35. TIME: choose the starting time of the song : rewind key
36.
: fast forward key : previous key
37.
: next key
38. PAL/ NTSC: NTSC / PAL TV system select
39. FM SCAN:FM programs auto scan : play/pause key : stop key
40.
41. MEMORY:
42. MUTE: Mute/unmute the sound
Store your favourite FM channels to memory.
2
1
To insert the remote control batteries:
1. Open the battery compartment.
2. Insert 2xAAA batteries with correct polarity(+/-) as indicated.
3. Close the battery compartment. Please Note:
3
·If you are not going to use the remote for a long time, remove the batteries.
·Do not use old and new or diff er en t ty pe s of b at te ri es i n co mb in at io n.
·Batteries contain chemical substances, so they should be disposed of properly.
7
Page 11
HOW TO USE BLUETOOTH CONNECTION
BLUETOOTH SPEAKER.
ENTER BLUETOOTH MODE
1.Press the “ BT ” input button on control.
2.OR Press the “ BT ” button on front
panel.
Speaker is in "BLUETOOTH" mode.
remote
control
AUTOSEARCH FOR DEVICES
Speaker will enter auto seach:for the first 15 seconds, it will search for the last connected device.
( Bluetooth indicator LED blinks 3 times every 2 seconds)
When speaker cannot find the last connected device.
CONNECT TO NEW DEVICES / ENTER PAIRING MODE
First restart Bluetooth by selecting any other input like AUX or DVD, then switch to BT again. Bluetooth is now on and can connect to the new device.
( Bluetooth indicator LED blinks fast)
Successful Connection.
The Bluetooth connection is complete.
( Bluetooth indicator LED blinks once every 5 seconds)
The unit will automatically connect to the last connected device within 10 metres.
New device: for example IPAD B Turn on IPAD B's Bluetooth.
Last connected device: for example IPAD A
Turn on IPAD A's Bluetooth.
Connect to "XS-N618" and enter the password "0000" if required.
8
Page 12
OTHER FUNCTIONS
FM RADIO OPERATION
Listen to FM radio broadcasts. Press the “FM” button on the unit/remote control, the display reads FM and the radio frequency. Press “FM SCAN” to scan the different channels and save it automatically. Note: in order to get the best reception, extend the FM ANT. on the rear of the unit before use to its full length.
CD/USB/SD OPERATION
1.Plug the CD disk/USB/SD memory stick into the appropriate terminal. (The unit can support up to 64G USB/SD device). Playback will start automatically from Track 1. First, press the MEDIA button to switch to DVD/USB/SD mode. Then press the DVD/USB/SD button to choose the correct input among the three.
2.To pause playback, press the button on unit or remote control.
3.To resume playback, press the button on unit or remote control again.
4.To select a desired track, press the or button respectively during playing until the desired track appears on the display. Or press the number buttons to choose the track number. The unit will start play automatically.
5.To search for a particular passage during playback, press and hold the or button to scan the current playing track at high speed until desired point (passage) appears, then press for normal playback mode.
6.To select a song which track number exceeds 10, press the 10+ button each time to skip forward, then press the correct number button to select desired track.
AUX-IN OPERATION
1.Press the AUX button on unit/remote control to select the “AUX” mode.
2.Connect your audio device to the AUX IN jack on the back panel of the unit with an AUX IN cable. (audio cable is offered in accessories)
3.Rotate the VOLUME knob on the unit/remote control or adjust the volume on the external device to increase or decrease the music volume to your desired level.
4.Control the playback with your audio device.
MIC JACK OPERATION
Microphone input is available in all modes.
1.Connect your microphone to the 6.3mm MIC JACK found on the top panel of the unit.
2.Rotate the MIC+/MIC-. button on the unit/remote control to increase or decrease the microphone volume.
3.Press the ECHO+/ECHO-. button on the unit/remote control to increase or decrease the echo effect of the microphone.
WIRELESS MICROPHONE
Turn on the wireless microphone switch on back of unit, and push ON of the microphone. Battery type: AA*2
WIRED MICROPHONE
Insert the terminal of wired microphone to the "MIC" jack of unit, and push ON the microphone.
9
Page 13
DVD FUNCTIONS
mute/ restore
Not ices fo r Syste m Setup
Fir stly, pr essS ETUP ke y on the re mote to e nter int o setup m enu int erfac e, and pr ess Up, D own, Lef t, and Ri ght key s on the re mote to s elect i t, and the n press E NTER ke y to make t he sele ction tak e effec t. Ex it the se tup men u inter face by pre ssing S ETUP ke y.
I. Sy stem Se tup
Source
SOURCE optio n, and pr ess
Enter
key t o enter i nto nex t menu an d selec t cor respo nding o ne acco rding t o the Source; the re are fo llowi ng sources for CARD and USB.
TV Sy stem
Enter
TV SY STEM op tion, a nd pres s
key t o enter i nto nex t menu an d selec t
cor respo nding o ne acco rding t o the con necte d TV wor king sy stem; t here ar e follo wing sy stems f or you r optio n: NTSC , PAL6 0, PAL and AUT O.
you r optio n:
DISC CARD USB
DISC,
Pow er Resu me
Enter POWER RESUME option, and press
key to enter into next menu, so that the
Power Resume can be set to two states of “On” and “Off”. When setting to “On”, resume to the position played last time to play again after Open/Close. When setting to “Off”, start to play again after Open/Close. Note:
1. Volume goes back to the default value after power off.
2. Treble, bass and system set up details are remembered after power off.
ON OFF
TV Type
Enter
TV TYPE opti on, and p ress
key t o enter i nto nex t menu. Ac cordi ng to
you r needs , there a re three m odes f or your o ption : 4:3PS, 4:3LB, 16:9. For different TV,please choose the mode according to actual requirements.
Pas sword
PASS WO RD
Enter
t o ent er i nto n ex t men u. W hen t he in the “ Pas sw ord L oc k” st at e, th e
be s et an d the pas sword c annot b e need t o mod ify the “ Ratin g” and ente r the c urren t passw ord or th e
and pr ess E NTER
: 000 0 ). Th e ne w
sig nicant di gits ,
to take e ffe ct.
o pti on , and
k ey to
pa
ssw ord ent ered mu st be
an
d the n press E NTER
pre
ini t
“R
a
mo
pa
ssw ord, fir stly
ini t
ock ( initi al pass word
unl
ss key ial s ettin g is
tin g” cann ot
died; if yo u
ial p asswo rd
four
key
10
Page 14
Ratin g
When playing a disc with a locking function, select the suitable play control rating. This setup can only be carried out after a password has been set. Unlock to change the play control rating. Note: The Rating restrictions only apply when password has been set.
efaul t
D
Enter
DEFAULT
key to se le ct “Res to re ”, an d th en p res s
key, so ea ch setu p wi ll rest or e to factory automatically.
op tio n, a nd p res s
E T ER
efaul t
d
N
Aud io La ng
AUDIO L AN G
Enter
key to en te r into ne xt m en u and s el ec t
langu ag e yo u need; t hi s fu nct io n ne eds
op tio n, a nd
CHINESE ENGLISH JAPAN FRENCH SPANISH PORTUGUESE RUSSIAN LATIN
press
Subti tl e Lang
Enter
SUBTI TL E LANG
key to en te r into ne xt m enu and s el ec t
languag e yo u want; t hi s fu nct io n ne eds
o pt ion, an d
CHINESE ENGLISH JAPAN FRENCH SPANISH PORTUGUESE RUSSIAN OFF
the aud io
disc su pp ort.
press the sub ti tle
disc su pp ort.
II. Lan gu age Set up
The set up o perat io ns are as foll ow s:
OSD Lan gu age
OSD LAN GU AGE
Enter
key to en te r into ne xt m en u and s el ec t
displ ay l an gua ge y ou w ant.
op tio n, a nd
ENGLISH CHINESE GERMAN SPANISH FRENCH PORTUGESE RUSSIAN
press
the int er face
Menu La ng
Enter
MENU LA NG
k
ey to ent er i nto nex t me nu a nd se le ct
yo u nee d; t hi s funct io n needs
language
op tio n, a nd
11
CHINESE ENGLISH JAPAN FRENCH SPANISH PORTUGUESE RUSSIAN LATIN
press
the men u
disc su pp ort.
Page 15
III. Au di o Se tu p
The setup operations are as fo ll ow s:
Aud io O ut
Audio out is system default and cannot be modied.
Echo
Enter
ECHO option, and press
key to
ent er i nt o ne xt m en u, a nd t he n us e th e keys “U p” a nd “ Do wn ” to a dj us t EC HO t o ECHO effe ct y ou d es ir e.
direction
the
KEY MIC S ETUP ECH O MIC V OL
SPDIF/RAW SPDIF/PCM
Key
Enter
KEY option, and press
into ne xt m en u, a nd t he n us e “Up” a nd “ Do wn ” to a dj us t KEY effe ct y ou d es ir e.
KEY MIC S ETUP ECH O MIC V OL
】key to enter
the direction keys
volume to the
# +4 +2 0
-2
-4
MIC Setup
Enter
MIC SETUPoption, and press
key to enter into next menu, and then press
ENTER key to turn on or turn off t he M IC function. The M IC w il l be o n if s el ec ti ng “ Au to ”,
and
The MIC will be off i f se le ct in g “O ff ”.
KEY MIC S ETUP ECH O MIC V OL
AUTO OFF
KEY MIC S ETUP ECH O MIC V OL
8 6 4 2 OFF
MICVOL
MICVOL option, and press
Enter
to en te r in to next menu, and then use dir ec ti on k ey s “U p” a nd “ Do wn ” to a dj us t MI C
volume to the volume effe ct y ou d es ir e.
KEY MIC S ETUP ECH O MIC V OL
】key
the
8 6 4 2 OFF
IV. Video Setup
The setup operations are as f o ll ow s:
Brightness
Enter
BRIGHTNESS option, and
key to enter into next menu, and then
dir ec ti on k ey s “U p” a nd “ Do wn ” to a dj us t brightness parameters.
SHARPNESS
press
use the
12
Page 16
Contrast
CONTRAST option, and then
Enter
】 key to enter into next menu, and then
use the direction keys “Up” and “Down” to adjust contrast parameters.
press
V.Digital Setup
The setup operations as follows:
Op mode
OP MODE 】 op ti on, and
Enter
key to en te r into ne d selec t
Op mode
you
want .
xt menu a n
press
the
SHARPNESS
Hue
HUE op ti on , an d th en
Enter
key to enter into next menu, and then
the dir ec ti on k ey s “U p” a nd “ Do wn ” to a dj us t contrast parameters.
SHARPNESS
press
use
+6 +4 +2
0
-2
-4
-6
Saturation
Enter
SATURATION】 option, and then
press
】 key to enter into next menu, and then
use the direction keys “Up” and “Down” to adjust the pa rameters.
SHARPNESS
OP MODE DYNAMIC RANGE DUAL MONO
DIGITAL SETUP
LINE OUT RF REMOD
Dynamic range
Enter
DYNAMIC RANGE optio n, a nd
key to en te r into ne d selec t
the Dynamic range
OP MODE DYNAMIC RANGE DUAL MONO
xt menu a n
you
want .
DIGITAL SETUP
Dual mono
DUAL MONO 】 opt io n, a nd
Enter
key to en te r into ne d select
you
the mode
OP MODE DYNAMIC RANGE DUAL MONO
want .
xt menu a n
DIGITAL SETUP
STEREO MONO L MONO R MIX MONO
press
FULL 6/8 4/8 2/8 OFF
press
Sharpness
Enter
SHARPNESS】 o pt io n, a nd t he n
key to enter into next menu, and then
keys “U p” a nd “ Do wn ” to a dj us t
SHARPNESS
sharpness par am et er s.
press
use the direction
13
Page 17
FAULT GUIDE
TROUBLESHOOTING: This section summarises a few common issues you might encounter when using this unit. Please contact Customer Service if you continue to experience problems.
Problem Possible solution No image Check whether the TV is set to the correct output, and that the
connections are proper.
No sound Check whether the correct MODE has been chosen, and whether
the connections are proper.
Not able to connect via Bluetooth
Not able to choose the correct mode
Bad image quality
Remote control not working properly
Not playing my audio files
When connecting to a new device, first set the MODE to some other input (eg. AUX) and then switch back to BT. You should be able to connect now. See page 8 for details on how to use Bluetooth mode.
Use BT, AUX and FM buttons respectively for Bluetooth, AUX and FM functions. To choose DVD, USB or SD inputs, first press the MEDIA button; then press the DVD/USB/SD button repeatedly to choose the correct input among the three.
DVD/CD might be dirty or of bad quality. Try inserting another disc.
Check if the remote control is aimed correctly at the receiver, and whether there are any obstacles blocking the receiver. If not, try replacing the batteries.
My audio formats are not supported. The unit supports: MP3, WMA audio etc.
14
Page 18
Page 19
Page 20
Loading...