JVC XS-N1249BBA, XS-N1249ABA User Manual

Adventure Bluetooth Speaker

XS-N1249BBA
XS-N1249ABA

User Manual

Important Safety Instructions

Warning: To avoid electrical shock, do not dismantle. Refer all
servicing to qualified service personnel.

1. Please read all of the instructions carefully and retain for future
reference.

2. When using electrical appliances, basic safety precautions
should always be followed.

3. This product is not a toy! Children should be supervised to
ensure that they do not play with the appliance.

4. There are no user-serviceable parts inside. Do not attempt to
repair by yourself.

5. Do not immerse the unit in water or other liquids.

6. Do not insert foreign objects into any opening on the unit.

7. Do not play music at excessive volume levels as this can cause
hearing loss or damage the unit.

8. Keep the unit away from flammable materials.

9. Do not expose batteries to heat or fire as they may explode.

10. Do not dispose of batteries in your household waste. Contact
your local council for information on disposal or recycling.

Important note on outdoor use

This speaker is IP66 rated - splash proof and dust proof. This IP
rating is only applicable when the silicone port cover is closed.
Please make sure the cover is closed and secure before using
outdoors.
Important: DO NOT submerge the speaker in water. If the speaker
gets wet, dry it thoroughly before using it again.

1

Description:

4 5678

1

2 3

9 10

1.ON/OFF button

2.Play/Pause/Phone

3.MIC

4.Previous/Volume –

5.Next/Volume +

Included:

1.Speaker

2.Micro USB Charging Cable

3.3.5 mm Audio Cable

4.User Manual

5.Warranty Card

6.Blue LED(Bluetooth)

7.Red LED(Charging)

8.Green LED(AUX)

9.Micro USB Charging Port

10.AUX in Port

2

Specifications

Supported Profiles: A2DP v1.2, HFP v1.5, HSP v1.2

Bluetooth Range: 33ft (10m)

Dimensions: 180 X 68 X 82 mm

Battery: Li-Ion 3.7V, 2000 mAh

Charging Input: DC 5V, 1A

Operation

Powering On

Press and Hold "ON/OFF" button 2 seconds to power ON, the Blue
LED will start to flash.
If an Aux (3.5 mm) cable is connected to the unit, the Blue LED will
turn off, and the Green LED will stay illuminated, indicating that
unit is in Aux-In mode.

Powering Off
Press and Hold "ON/OFF" button 2 seconds to power off.

Bluetooth Mode

The unit automatically enters 'pairing mode' when it is powered on.
Place your Bluetooth-enabled device within 10 metres of the speaker.
Navigate to the Bluetooth setting menu on your device and search for
new devices. The Bluetooth name for this speaker is “XS-N1249”.

Note: The speaker powers off automatically in 10 minutes if there is
no audio in Bluetooth mode.

3

Begin Streaming Music

Press “ ” to start playing music.

Press and Hold“ ” 2 seconds to play the next track.

Press and Hold“ ” 2 seconds to play previous track.

Press either “ ” or “ ” for volume control.

Using the Hands-Free Function

When the unit is connected and paired to a Bluetooth-enabled device
like a smartphone ,the unit allows you to answer phone calls with its
built-in microphone.
Press “ ” to accept a call.
To end a call press“ ”.
To reject a call, press and hold “ ” for 2 seconds.

Aux-In Mode

Plug in the supplied 3.5 mm cable into the unit. Connect the other end
to the AUX out port on your device.The Green LED will only illuminate
when in “Aux” mode.
Please note music and volume can be controlled on your device.

Charging

Attach the USB cable to the unit, and plug into any USB charger.
If the unit is completely discharged, it will take approximately 4
hours to fully charge.
The red LED lights up when the unit is charging. When fully charged,
the red LED turns off.
Note:There will be a beep when the battery is low and needs to
be recharged.

4

LED Status

Blue LED flashing & solid Bluetooth Mode

Green LED on solid

Red LED

Aux Mode

Charging

Troubleshooting

Unit doesn’t connect

to device

A tone is heard every few seconds Speaker needs to be charged

Unit will not power on

Unit doesn’t control

track(s)/volume

Unit distorts at high volume

Speaker needs to be connected/

re-paired to device

Speaker needs to be charged

Speaker needs to be in Wireless

mode for full control

The device volume needs to

be lowered

5

Register your product at jvctv.com.au/warranty-registration