JVC TM-A9UCV, TM-A9U User Manual

COLOR VIDEO MONITOR

POWER

CONTRASTBRIGHTCHROMAPHASEVOLUME

ON OFF

TM-A9U
TM-A9UCV

INSTRUCTIONS

For Customer Use:

Enter below the Model No. and
Serial No. which are located on
the rear of the cabinet. Retain this
information for future reference.

Model No.
Serial No.

(TM-A9U shown.)

Thank you for purchasing this JVC color video monitor. Before using it, read and follow all
instructions carefully to take fullest advantage of the monitor’s performance.

SAFETY PRECA UTIONS

W ARNING:

TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT
EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

CA UTION:

To reduce the risk of electric shock, do not remove
cover. Refer sevicing to qualified service personnel.

䡵 PRECAUTIONS

● Use only the power source specified on the unit.

● Keep flammable material, water, and metal objects away

from the unit — especially the interior of the unit.

● This unit incorporates high voltage circuitry.
For your own safety and that of your equipment, do not
attempt to modify or disassemble this monitor.
There are no user-serviceable parts inside.

● Unplug the monitor when you’re not going to be using it
for a long period.

INFORMATION

CAUTION: Changes or modification not approved by

JVC could void the user’s authority to operate the
equipment.

NOTE: This equipment has been tested and found to
comply with the limits for a Class A digital device,
pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against
harmful interference when the equipment is operated in
a commercial environment. This equipment generates,
uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instruction
manual, may cause harmful interference to radio
communications. Operation of this equipment in a
residential area is likely to cause harmful interference in
which case the user will be required to correct the
interference at his own expense.

䡵 HANDLING

● Avoid shocks or vibrations. These may damage the unit

and cause it to malfunction.

● Do not block the ventilation slots.

● Do not expose this unit to high temperatures.

Extended exposure to direct sunlight or a heater could
deform the cabinet or cause the performance of internal
components to deteriorate.

● Do not place the unit near appliances generating strong
electric or magnetic fields. These can generate picture
noise and instability.

● Keep the monitor clean by wiping the cabinet and CRT
screen with a piece of soft cloth. Do not apply thinner or
benzene. These chemicals can damage the finish and
erase printed letters. When the unit is excessively dirty,
use a diluted neutral cleanser, then wipe away the
cleanser with a dry cloth.

SCREEN BURN

● It is not recommended to keep a certain still image
displayed on screen for a long time as well a dispalying
extremely bright images on screen. This may cause a
burning (sticking) phemomenon on the screen of cathode­ray tube.
This problem does not occur as far as displaying normal
video playback motion images.

2

FEATURES

䡵 9-inch TV-grade cathode-ray tube
䡵 Horizontal resolution of 280 TV lines or more
䡵 Professional metal cabinet design
䡵 Bridge-connectable input terminals (1 line for video, 1 line for audio *1)

*1: The audio function can only be used with the TM-A9U.

It is not available with the TM-A9UCV.

CONTENTS

SAFETY PRECAUTIONS............................................................................................................ 2

FEATURES.................................................................................................................................. 3

CONTROLS AND FEATURES.................................................................................................... 4

CONNECTION EXAMPLE........................................................................................................... 5

BASIC OPERATION.................................................................................................................... 5

PICTURE ADJUSTMENTS ......................................................................................................... 6

TROUBLESHOOTING.................................................................................................................6

SPECIFICATIONS ....................................................................................................................... 7

3