JVC TH-BD50, LVT2099-029A, SP-THBD50F, XV-THBD50, SP-THBD50W User Manual

...

Download

TH-BD50

Consist of XV-THBD50, SP-THBD50F, SP-THBD50C and SP-THBD50W

NETWORK MEDIA SYSTEM

INSTRUCTIONS

LVT2099-029A

[UJ]

CAUTION

To reduce the risk of electrical shocks, fire, etc.:

1. Do not remove screws, covers or cabinet.

2. Do not expose this appliance to rain or moisture.

CAUTION

The 1/' button in any position does not disconnect the mains line. Disconnect the mains plug to shut the power off completely (the STANDBY lamp goes off). The MAINS plug or an appliance coupler is used as the disconnect device, the disconnect device shall remain readily operable.

• When the system is on standby, the STANDBY lamp lights red.

• When the system is turned on, the STANDBY lamp goes off.

The power can be remote controlled.

CAUTION

• Do not block the ventilation openings or holes.

(If the ventilation openings or holes are blocked by a newspaper or cloth, etc., the heat may not be able to get out.)

• Do not place any naked flame sources, such as lighted candles, on the apparatus.

• When discarding batteries, environmental problems must be considered and local rules or laws governing the disposal of these batteries must be followed strictly.

• Do not expose this apparatus to rain, moisture, dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the apparatus.

IMPORTANT FOR LASER PRODUCTS

1. CLASS 1 LASER PRODUCT

2. CAUTION: Do not open the top cover or cabinet. There are no user serviceable parts inside the unit; leave all servicing to qualified service personnel.

3. CAUTION: CLASS 3B VISIBLE AND INVISIBLE

LASER RADIATION WHEN OPEN AVOID EXPOSURE TO THE BEAM.

4. REPRODUCTION OF LABEL: CAUTION LABEL, PLACED INSIDE THE UNIT.

Warnings, cautions and others

CAUTION CLASS 3B VISIBLE AND INVISIBLE LASER RADIATION WHEN OPEN.

AVOID EXPOSURE TO THE BEAM.

ADVARSEL KLASSE 3B SYNLIG OG USYNLIG LASERSTRÅLING VED ÅBNING.

UNDGÅ UDSAETTELSE FOR STRÅLING.

ADVARSEL KLASSE 3B SYNLIG OG USYNLIG LASERTSRÅLING NÅR DEKSEL

ÅPENS. UNNGÅ EKSPONERING FOR STRÅLEN.

VARNING KLASS 3B SYNLIG OCH OSYNLIG LASERSTRÅLNING NÄR DENNA

DEL ÄR ÖPPNAD. STRÅLEN ÄR FARLIG.

VAR O AVATTAESSA OLET ALTTIINALUOKAN 3B NÄKYVÄÄ JA

NÄKYMÄTÖNTÄ LASERSÄTEILYLLE VARO ALTISTUMISTA SÄTEELLE.

VORSICHT SICHTBARE UND UNSICHTBARE LASERSTRAHLUNG KLASSE 3B,

WENN ABDECKUNG GEÖFFNET. NICHT DEM STRAHL AUSSETZEN.

CAUTION — Proper Ventilation

To avoid risk of electric shock and fire and to protect from damage, locate the apparatus as follows: Top/Front/Back/Sides: No obstructions should be placed in the areas shown by the dimensions below. Bottom: Place on the level surface. Maintain adequate air path for ventilation by placing on a stand with a height of 10 cm or more. In addition, maintain the best possible air circulation.

Introduction

CAUTION

• Battery shall not be exposed to excessive heat such as sunshine, fire or the like.

Front view of the main unit and speakers

Side view of the main unit

[European Union only]

Notes on Copyrights

z Because AACS (Advanced Access Content

System) is approved as content protection system for BD format, similar to use of CSS (Content Scramble System) for DVD format, certain restrictions are imposed on playback, analogue signal output, etc., of AACS protected contents. The operation of this product and restrictions on this product may vary depending on your time of purchase as those restrictions may be adopted and/or changed by AACS after the production of this product. Furthermore, BD-ROM Mark and BD+ are additionally used as content protection systems for BD format, which imposes certain restrictions including playback restrictions for BD-ROM Mark and/or BD+ protected contents. To obtain additional information on AACS, BD-ROM Mark, BD+, or this product, please contact an authorized Customer Service Centre.

z Many BD-ROM/DVD discs are encoded with copy

protection. Because of this, you should only connect your player directly to your TV, not to a VCR. Connecting to a VCR results in a distorted picture from copy-protected discs.

z This product incorporates copyright protection

technology that is protected by U.S. patents and other intellectual property rights. Use of this copyright protection technology must be authorized by Macrovision, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision. Reverse engineering or disassembly is prohibited.

z Under the U.S. Copyright laws and Copyright

laws of other countries, unauthorized recording, use, display, distribution, or revision of television programs, videotapes, BD-ROM discs, DVDs, CDs and other materials may subject you to civil and/or criminal liability.

Licenses

Java and all Java-based trademarks and logos are trademarks or registered trademarks of Sun Microsystems, Inc. in the United States and other countries.

Manufactured under license from Dolby Laboratories. Dolby, Pro Logic, and the double-D symbol are trademarks of Dolby Laboratories.

Manufactured under license under U.S. Patent #’s: 5,451,942; 5,956,674; 5,974,380; 5,978,762; 6,226,616; 6,487,535; 7,392,195; 7,272,567; 7,333,929; 7,212,872 & other U.S. and worldwide patents issued & pending. DTS is a registered trademark and the DTS logos, Symbol, DTS-HD and DTS-HD Master Audio I Essential are trademarks of DTS, Inc. © 1996-2008 DTS, Inc. All Rights Reserved.

HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI licensing LLC.

“BD-LIVE” logo is a trademark of Blu-ray Disc Association.

“DVD Logo” is a trademark of DVD Format/Logo Licensing Corporation.

“x.v.Color” is a trademark of Sony Corporation. “Blu-ray Disc” is a trademark. “BONUSVIEW” is trademark of Blu-ray Disc

Association. This product is licensed under the AVC patent port-

folio license and VC-1 patent portfolio license for the personal and non-commercial use of a consumer to (i) encode video in compliance with the AVC Standard and VC-1 Standard (“AVC/VC-1 Video”) and/or (ii) decode AVC/VC-1 Video that was encoded by a consumer engaged in a personal and noncommercial activity and/or was obtained from a video provider licensed to provide AVC/VC-1 Video. No license is granted or shall be implied for any other use. Additional information may be obtained from MPEG LA, LLC. See http://www.mpegla.com.

“AVCHD” and the “AVCHD” logo are trademarks of Panasonic Corporation and Sony Corporation.

DivX is a registered trademark of DivX, Inc., and is used under license. Covered by one or more of following U.S. Patents: 7,295,673; 7,460,688; 7,519,574; 7,515,710. “DivX Certified to play DivX video up to HD 1080p, including premium content.”

Introduction

Contents

Introduction . . . . . . . . . . . . . . . . . . .7-14

About the Symbol Display . . . . . . . . . . . . .7

Symbols Used in this Manual . . . . . . . . . . . . .7

Notes on Discs . . . . . . . . . . . . . . . . . . . . . . . .7

Moisture Condensation . . . . . . . . . . . . . . . . . .7

Handling the Unit . . . . . . . . . . . . . . . . . . . . . . .7

Playable Discs . . . . . . . . . . . . . . . . . . . . . . . . .8

Regional Code . . . . . . . . . . . . . . . . . . . . . . . .8

BD-ROM Disc Features . . . . . . . . . . . . . . . . . .9

Compatibility Notes . . . . . . . . . . . . . . . . . . . .10

Certain System Requirements . . . . . . . . . . .10

Important Notice for TV color system . . . . . .10

Notice for language setting . . . . . . . . . . . . . .10

Front Panel . . . . . . . . . . . . . . . . . . . . . . . . . .11

Rear Panel . . . . . . . . . . . . . . . . . . . . . . . . . . .12

Remote Control . . . . . . . . . . . . . . . . . . . . . . .13

Remote Control Operation . . . . . . . . . . . . . .13

Attaching the speakers to the player . . . . . . .14

Positioning the System . . . . . . . . . . . . . . . . .14

Installation and Setup . . . . . . . . . .15-29

Connections to Your TV . . . . . . . . . . . . . . . . .15

HDMI connection . . . . . . . . . . . . . . . . . . . . .16

Internet connection . . . . . . . . . . . . . . . . . . . .17

Resolution Setting . . . . . . . . . . . . . . . . . .18-19

Setting the sound mode . . . . . . . . . . . . . . . .20

Adjust the speaker level settings . . . . . . . . . .20

Using the late night function . . . . . . . . . . . . .20

Using the sleep timer . . . . . . . . . . . . . . . . . . .20

Using a USB Flash Drive . . . . . . . . . . . . . . .21

Using the Home Menu . . . . . . . . . . . . . . . . . .21

Initial Settings . . . . . . . . . . . . . . . . . . . . . .22-26

- General Operation . . . . . . . . . . . . . . . . .22

- [DISPLAY] Menu . . . . . . . . . . . . . . . . . .22

- [LANGUAGE] Menu . . . . . . . . . . . . . . .23

- [AUDIO] Menu . . . . . . . . . . . . . . . . . . .23

- [LOCK] Menu (Parental Control) . . . . . .24

- [NETWORK] Menu . . . . . . . . . . . . . . . .25

- [OTHERS] Menu . . . . . . . . . . . . . . . . . .26

Listening to music from your portable

audio player . . . . . . . . . . . . . . . . . . . . . . . . . .27

Listening to the sound from your component 27

Using HDMI IN jacks . . . . . . . . . . . . . . . . . . .28

Using DIGITAL AUDIO IN jacks . . . . . . . . . .28

Antenna Connection . . . . . . . . . . . . . . . . . . .29

Operations . . . . . . . . . . . . . . . . . . .30-40

General playback features . . . . . . . . . . . .30-31

Additional features . . . . . . . . . . . . . . . . . . . . .32

- If a disc menu screen is displayed . . . .32

- Last Scene Memory . . . . . . . . . . . . . . .32

- Marker Search . . . . . . . . . . . . . . . . . . . .32

- Hearing a different audio . . . . . . . . . . .33

- Using the search menu . . . . . . . . . . . . .33

- Using Color (R, G, Y, B) Buttons . . . . .33

- Screen Saver . . . . . . . . . . . . . . . . . . . . .33

- Changing content list view . . . . . . . . . .33

Displaying Disc Information On-Screen . . . .34

Enjoying BD-LIVE™ or BONUS VIEW™

in BD-Video . . . . . . . . . . . . . . . . . . . . . . .34-35

Playing a movie . . . . . . . . . . . . . . . . . . . . . . .36

Notice for displaying the DivX subtitle . . . . . .36

Listening to music . . . . . . . . . . . . . . . . . . . . .37

Presetting the Radio Stations . . . . . . . . . . . .38

Listening to the radio . . . . . . . . . . . . . . . . . . .38

Viewing a photo . . . . . . . . . . . . . . . . . . . . . . .39

Options during viewing a photo file in

full screen . . . . . . . . . . . . . . . . . . . . . . . . . . .40

Reference . . . . . . . . . . . . . . . . . . . .41-47

Controlling a TV with the Supplied

Remote Control . . . . . . . . . . . . . . . . . . . . . . .41

Language Codes . . . . . . . . . . . . . . . . . . . . . .42

Area Codes . . . . . . . . . . . . . . . . . . . . . . . . . .42

Troubleshooting . . . . . . . . . . . . . . . . . . . .43-44

Specifications . . . . . . . . . . . . . . . . . . . . . .45-46

Open source software notice . . . . . . . . . . . . .47

Introduction

To ensure proper use of this product, please read this owner’s manual carefully and retain for future reference.

This manual provides information on the operation and maintenance of your player. Should the unit require service, contact an authorized service location.

About the Symbol Display

“ ” may appear on your TV display during operation and indicates that the function explained in this owner’s manual is not available on that specific media.

Symbols Used in this Manual

Note:

Indicates special notes and operating features.

Tip:

Indicates tips and hints for making the task easier.

A section whose title has one of the following symbols are applicable only to the disc represented by the symbol.

All discs listed below

BD-ROM disc DVD-Video, DVD-R/RW, +R/+RW in Video

mode or VR mode and finalized DVD-R/RW, +R/+RW in AVCHD format DivX files Audio CDs MP3 files WMA files Photo files

Notes on Discs

Handling Discs

Do not touch the playback side of the disc. Hold the disc by the edges so that fingerprints do not get on the surface. Never stick paper or tape on the disc.

Storing Discs

After playing, store the disc in its case. Do not expose the disc to direct sunlight or sources of heat and never leave it in a parked car exposed to direct sunlight.

Cleaning Discs

Fingerprints and dust on the disc can cause poor picture quality and sound distortion. Before playing, clean the disc with a clean cloth. Wipe the disc from the centre out.

Do not use strong solvents such as alcohol, benzine, thinner, commercially available cleaners, or anti-static spray intended for older vinyl records.

Moisture Condensation

Never operate this product immediately after moving it from a cold location to a warm location. Leave it for two or three hours without operating it. If you use this product in such a situation, it may damage discs and internal parts.

Handling the Unit

When shipping the unit

Please save the original shipping carton and packing materials. If you need to ship the unit, for maximum protection, re-pack the unit as it was originally packed at the factory.

Keeping the exterior surfaces clean

• Do not use volatile liquids such as insecticide spray near the unit.

• Wiping with strong pressure may damage the surface.

• Do not leave rubber or plastic products in contact with the unit for a long period of time.

Cleaning the unit

To clean the player, use a soft, dry cloth. If the surfaces are extremely dirty, use a soft cloth lightly moistened with a mild detergent solution. Do not use strong solvents such as alcohol, benzine, or thinner, as these might damage the surface of the unit.

Maintaining the Unit

The unit is a high-tech, precision device. If the optical pick-up lens and disc drive parts are dirty or worn, the picture quality could be diminished.

For details, please contact your nearest authorized service centre.

PHOTO

WMA

MP3

ACD

DivX

AVCHD

DVD

ALL

Playable Discs

Blu-ray Disc

- Discs such as movies that can be purchased or rented.

- BD-R/RE discs that contain audio titles, DivX, MP3, WMA, or Photo files.

DVD-VIDEO

Discs such as movies that can be purchased or rented.

DVD-R

- Video mode and finalized only

- Supports the dual layer disc also

- AVCHD format

- DVD-R discs that contain audio titles, DivX, MP3, WMA, or Photo files.

DVD-RW

- VR mode, Video mode and finalized only

- AVCHD format

- DVD-RW discs that contain audio titles, DivX, MP3, WMA, or Photo files.

DVD+R

- Finalized disc only

- Supports the dual layer disc also

- AVCHD format

- DVD+R discs that contain audio titles, DivX, MP3, WMA, or Photo files.

DVD+RW

- Video mode and finalized only

- AVCHD format

- DVD+RW discs that contain audio titles, DivX, MP3, WMA, or Photo files.

Audio CD

Audio CDs or CD-Rs/CD-RWs in audio CD format that can be purchased

CD-R/CD-RW

CD-R/CD-RW discs that contain audio titles, DivX, MP3, WMA, or Photo files.

AVCHD (Advanced Video Codec High Definition)

• This player can playback AVCHD format discs. These discs are normally recorded and used in camcorders.

• The AVCHD format is a high definition digital video camera format.

• The MPEG-4 AVC/H.264 format is capable of compressing images at higher efficiency than that of the conventional image compressing format.

• Some AVCHD discs use the “x.v.Color” format.

• This player can playback AVCHD discs using “x.v.Color” format.

• Some AVCHD format discs may not play, depending on the recording condition.

• AVCHD format discs need to be finalized.

• “x.v.Color” offers a wider color range than normal DVD camcorder discs.

Regional Code

This unit has a regional code printed on the rear of the unit. This unit can play only BD-ROM or DVD discs labelled same as the rear of the unit or “ALL”.

Notes:

z Depending on the conditions of the recording

equipment or the CD-R/RW (or DVD-R/RW, +R/+RW) disc itself, some CD-R/RW (or DVD-R/RW, +R/+RW) discs cannot be played on the unit.

z Do not attach any seal or label to either side (the

labelled side or the recorded side) of a disc.

z Do not use irregularly shaped CDs (e.g., heart-

shaped or octagonal). Doing so may result in malfunctions.

z Depending on the recording software & the final-

ization, some recorded discs (CD-R/RW or DVD-R/RW, +R/+RW) may not be playable.

z DVD-R/RW, +R/+RW and CD-R/RW discs record-

ed using a personal computer or a DVD or CD Recorder may not play if the disc is damaged or dirty, or if there is dirt or condensation on the player’s lens.

z If you record a disc using a personal computer,

even if it is recorded in a compatible format, there are cases in which it may not play because of the settings of the application software used to create the disc. (Check with the software publisher for more detailed information.)

z This player requires discs and recordings to meet

certain technical standards in order to achieve optimal playback quality. Pre-recorded DVDs are automatically set to these standards. There are many different types of recordable disc formats (including CD-R containing MP3 or WMA files) and these require certain pre-existing conditions to ensure compatible playback.

z Customers should note that permission is

required in order to download MP3 / WMA files and music from the Internet. Our company has no right to grant such permission. Permission should always be sought from the copyright owner.

z This player supports 8 cm disc except Blu-ray

Disc.

Introduction

BD-ROM Disc Features

BD-ROM Discs can store 25 GB (single layer) or 50 GB (dual layer) on a single sided disc - about 5 to 10 times the capacity of a DVD. BD-ROM Discs also support the highest quality HD video available in the industry (up to 1920 x 1080) Large capacity means no compromise on video quality. Furthermore, a BD-ROM disc has the same familiar size and look as DVD.

• The following BD-ROM disc features are disc dependent and will vary.

• Appearance and navigation of features will also vary from disc to disc.

• Not all discs will have the features described below.

•

BD-ROM, Hybrid disc have both BD-ROM and DVD (or CD) layers on one side. On such discs, BD-ROM layer will be only played back in this player.

Video highlights

The BD-ROM format for movie distribution supports three highly advanced video codecs, including MPEG-2, MPEG4 AVC (H.264), and SMPTE VC1. HD video resolutions are also available:

• 1920 x 1080 HD

• 1280 x 720 HD

For High-Definition Playback

To view high-definition contents from BD-ROM discs, an HDTV is required. Some discs may require HDMI OUT for viewing of high-definition contents. Ability to view high-definition contents in BD-ROM discs may be limited depending on the resolution of your TV.

Graphic planes

Two individual, full HD resolution (1920x1080) graphic planes (layers) are available, on top of the HD video layer. One plane is assigned to videorelated, frame accurate graphics (like subtitles), and the other plane is assigned to interactive graphic elements, such as buttons or menus. For both planes, various wipes, fades and scroll effects may be available.

Menu sounds

When you highlight or select a menu option, sounds can be heard such as button clicks or a voice-over explaining the highlighted menu choice.

Multi-page/PopUp Menus

With DVD-Video, playback is interrupted each time a new menu screen is accessed. Due to BD-ROM disc’s ability to preload data from the disc without interrupting playback, a menu can consist of several pages. You can browse through the menu pages or select different menu paths, while the audio and video remain playing in the background.

Interactivity

Certain BD-ROM Discs may contain animated menus and/or trivia games.

User Browsable Slideshows

With BD-ROM Discs, you can browse through various still pictures while the audio remains playing.

Subtitles

Depending on what is contained on the BD-ROM disc, you may be able to select different font styles, sizes and colors for some subtitles. Subtitles may also be animated, scrolled or faded in and out.

BD-J Interactive Capability

The BD-ROM format supports Java for interactive functions. “BD-J” offers content providers almost unlimited functionality when creating interactive BD-ROM titles.

BD-ROM Disc Compatibility

This player supports BD-ROM Profile 2.

• Discs supporting BD-Live (BD-ROM version 2 Profile 2) that allows interactive functions to be used when this unit is connected to the Internet in addition to the BONUSVIEW function.

• Discs supporting BONUSVIEW (BD-ROM version 2 Profile 1 version 1.1/Final Standard Profile) that allows Virtual packages or Picture-in-Picture functions to be used.

• See “Enjoying BD-LIVE™ or BONUS VIEW™ in BD-Video” on page 34 for details.

Graphic Plane

HD Video

Compatibility Notes

Because BD-ROM are a new format, certain disc, digital connection and other compatibility issues are possible. If you experience compatibility problems, please contact an authorized Customer Service Centre.

Viewing high-definition content and up-converting standard DVD content may require an HDMIcapable input or HDCP-capable DVI input on your display device.

Some BD-ROM and DVD discs may restrict the use of some operation commands or features.

You can use a USB device that is used to store some disc related information, including downloaded on-line content. The disc you are using will control how long this information is retained.

Some BD-ROM discs may not be played correctly unless a USB device is inserted.

Certain System Requirements

For high definition video playback:

High definition display that has COMPONENT or HDMI.

BD-ROM disc with high definition content.

HDMI or HDCP capable DVI input on your display device is required for some content (as specified by disc authors).

For up-conversion of standard definition DVD, an HDMI or HDCP capable DVI input on your display device is required for copy protected content.

Notice for language setting

At first, set [DISC MENU]/ [DISPLAY MENU] to your using language. Refer to page 23.

Introduction

a Operation buttons

Z (OPEN/CLOSE)

Opens or closes the disc tray.

N / X (PLAY / PAUSE)

Starts playback. Pause playback temporarily, press again to exit pause mode.

x (STOP)

Stops playback. When a menu is displayed, this button works as "ENTER".

. / > (SKIP)

Go to next or previous file/track/chapter. Searches backward or forward if you press and hold it.

SOURCE

Changes the source.

VOLUME +/-

Adjusts speaker volume.

b 1/' (STANDBY) Button

Switches the unit ON or OFF.

c Disc Tray

Insert a disc here.

d Remote Sensor

Point the Remote Control here.

e Display Window

Shows the current status of the player.

f USB Port

Connect a USB Flash Drive.

Front Panel

bc de f

a AC Power Cord

Plug into the power source.

b SPEAKER Connetors

Connect the speakers.

c Cooling Fan

d FM Antenna connector

Connect the FM antenna.

e DIGITAL AUDIO IN (COAXIAL)

Connect to digital (coaxial) audio equipment.

f VIDEO OUT

Connect to a TV with video inputs.

g AUX (L/R) INPUT

Connect to an external source with 2 channel audio outputs.

h AM Antenna connector

Connect the AM antenna.

DIGITAL AUDIO IN (OPTICAL)

Connect to digital (optical) audio equipment.

j PORT. IN

Connect to a portable player with audio outputs.

k COMPONENT VIDEO (Y PB PR)

OUTPUT (PROGRESSIVE SCAN)

Connect to a TV with Y Pb Pr inputs.

l LAN port

Connect a network with an always-on broadband connection.

m HDMI IN (Type A) 1/2

Connect to an external source with HDMI outputs.

n HDMI OUT (Type A)

Connect to TV with HDMI inputs. (Interface for digital audio and video)

ab cdefg

hij kl m n

Rear Panel

Introduction

z z z z z az z z z z

INPUT: Changes the input source. (FM, AM, AUX, PORTABLE, OPTICAL, COAXIAL, HDMI IN 1, HDMI IN

2) TUNER: Selects the system’s tuner

directly.

(1/'): Switches the player ON or OFF. OPEN/CLOSE (Z): Opens and clos-

es the disc tray. When you open or close the disc tray. INPUT switches to the disc. Then the unit starts playback the disc or displays the Home Menu.

PIP*: Switches on/off Secondary Video (Picture-in-picture) (BD-ROM only).

♠

Depending on a disc type or the pre-recorded contents of the BDROM disc, different functions may be executed than other media or there are no responses when pressing some buttons (depending on media used).

DISPLAY: Displays or exits OnScreen Display.

HOME: Displays or exits the [Home Menu].

DISC MENU: Accesses menu on a disc.

z z z z z bz z z z z

Direction buttons: Selects an option in the menu.

PRESET (v/V): Selects programme of Radio.

ENTER: Acknowledges menu selection.

RETURN (O): Exits the menu or resumes playback. The resume play function may work depending on the BD-ROM disc.

TITLE/POP-UP: Displays the DVD title menu or BD-ROM’s popup menu, if available.

z z z z z cz z z z z

x: Stops playback.

If you press this button again, the “RESUME” function (record of the stopped point) will be clear.

N: Starts playback. X: Pauses playback. ./ >: Go to next or

previous chapter / track / file.

m/ M: Searches backward or forward.

SPK LEVEL: Sets the sound level of desired speaker.

SOUND: Selects a sound mode. AUDIO MUTING: Press AUDIO MUT-

ING to mute your unit. You can mute

your unit in order, for example, to answer the telephone.

AUDIO VOL (+/-): Adjusts speaker volume.

DRC: Sets the late night function.

z z z z z dz z z z z

0-9 numerical buttons: Select numbered options in a menu.

SUBTITLE: Selects a subtitle language.

RESOLUTION: Sets the output resolution for HDMI and COMPONENT VIDEO OUT jacks.

MARKER: Marks any point during playback.

SEARCH: Displays or exits the search menu.

REPEAT: Repeat a desired section. CLEAR: Removes a mark on the

search menu or a number when setting the password.

Colored (R, G, Y, B) buttons: Use to navigate BD-ROM menus. They are also used for [MOVIE], [PHOTO], [MUSIC] menu.

- B button: Selects MONO or STEREO in FM mode.

TV Control Buttons: See page 41. SLEEP: Sets a certain period of time

after which the unit will switch to standby.

Remote Control

Remote Control Operation

Point the Remote Control at the remote sensor and press the buttons.

Caution

• Do not put the batteries in the place where young children can reach.

Remote Control Battery Installation

Remove the battery cover on the rear of the Remote Control, and insert a R03 (size AAA) battery with and matched correctly.

Attaching the speakers to the player

a You will have received six speaker cables.

Each one is color-coded by a band near each end and connects one of the six speakers to the player.

b Connect the wires to the player.

Match each wire’s colored band to the same colored connection terminal on the rear of the player. To connect the cable to the player, press each plastic finger pad to open the connection terminal. Insert the wire and release the finger pad.

Connect the black end of each wire to the terminals marked -(minus) and the other end to the terminals marked + (plus).

c Connect the wires to the speakers.

Connect the other end of each wire to the correct

speaker according to the color coding: Grey Rear Behind you and to your right Blue Rear Behind you and to your left. Green Center Above or below screen, directly in

front of you.

Orange Sub This can be placed in any front

Woofer position.

Red Front In front of you, to the right of the

screen.

White Front In front of you, to the left of the

screen.

Be careful of the following

Be careful to make sure children not to put their hands or any objects into the *speaker duct.

*Speaker duct: A hole for plentiful bass sound on speaker cabinet(enclosure).

Positioning the System

The following illustration shows an example of positioning the system. Note that the illustrations in these instructions differ from the actual unit for explanation purposes. For the best possible surround sound, all the speakers other than the subwoofer should be placed at the same distance from the listening position (A).

A Front left speaker (L)/ B Front right speaker (R):

Place the front speakers to the sides of the monitor or screen and as flush with the screen surface as possible.

C Center speaker: Place the center speaker above

or below the monitor or screen.

D Surround left speaker (L)/ E Surround right

speaker (R): Place these speakers behind your listening position, facing slightly inwards.

F Subwoofer: The position of the subwoofer is not

so critical, because low bass sounds are not highly directional. But it is better to place the subwoofer near the front speakers. Turn it slightly toward the center of the room to reduce the wall reflections.

G Unit

C G

Installation and

Setup

Connections to Your TV

Make one of the following connections, depending on the capabilities of your existing equipment.

Tips:

Depending on your TV and other equipment you wish to connect, there are various ways you could connect the player. Use only one of the connections described below.

Please refer to the manuals of your TV or other devices as necessary to make the best connections.

Caution

– Make sure the player is connected directly to the

TV. Tune the TV to the correct video input channel.

– Do not connect your player via your VCR. The

image could be distorted by the copy protection system.

Component Video Connection

Connect the COMPONENT VIDEO OUT jacks on the player to the corresponding input jacks on the TV using Y Pb Pr cables (C). You can hear the sound through the system’s speakers.

Tip:

When you use COMPONENT VIDEO OUT connection, you can change the resolution for the output. (Refer to “Resolution setting” on page 18.)

Video Connection

Connect the VIDEO OUT jack on the player to the video in jack on the TV using a video cable (V). You can hear the sound through the system’s speakers.

Installation and Setup

Rear of the player

Rear of TV

VIDEO INPUT

COMPONENT VIDEO INPUT

HDMI connection

If you have a HDMI TV or monitor, you can connect it to this player using a HDMI cable.

1. Connect the HDMI jack on the player to the HDMI

jack on a HDMI compatible TV or monitor (H).

2. Set the TV’s source to HDMI (refer to TV’s

Owner’s manual).

Notes:

You must select a HDMI audio output that your TV accepts using [HDMI Audio] options on the [Setup] menu (see page 23).

If a connected HDMI device does not accept the audio output of the unit, the HDMI device’s audio sound may be distorted or may not output.

Tips:

• You can fully enjoy digital audio and video signals

together with this HDMI connection.

• When you use HDMI connection, you can change

the resolution for the HDMI output. (Refer to “Resolution Setting” on page 18.)

• Select the type of video output from the HDMI

OUT jack using [HDMI Color Setting] option on the [Setup] menu. (Refer to “HDMI color Setting” on page 22.)

Cautions

z Changing the resolution when the connection has

already been established may result in malfunctions. To solve the problem, turn off the player and then turn it on again.

z When the HDMI connection with HDCP is not veri-

fied, TV screen is changed to black screen. In this case, check the the HDMI connection, or disconnect the HDMI cable.

z If there is noise or lines on the screen, please

check the HDMI cable (length is generally limited to 4.5 m)

and use a High Speed HDMI cable (Version

1.3).

Additional Information for HDMI

z When you connect a HDMI or DVI compatible

device make sure of the following:

- Try switching off the HDMI/DVI device and this player. Next, switch on the HDMI/DVI device and leave it for around 30 seconds, then switch on this player.

- The connected device’s video input is set correctly for this unit.

- The connected device is compatible with 720x480p, 1280x720p, 1920x1080i or 1920x1080p video input.

z Not all HDCP-compatible HDMI or DVI devices

will work with this player.

- The picture will not be displayed properly with non-HDCP device.

- This player does not playback and TV screen is changed to black or green screen or the snow noise may occur on the screen.

Rear of the player

HDMI IN

HDMI compatible TV

Installation and

Setup

Internet connection

This player can be connected to a local area network (LAN) via the LAN port on the rear panel. After making the physical connection the player needs to be set up for network communication. This is done from the [Setup] menu — see “[NETWORK] Menu” on page 25 for detailed instructions.

Connect the player’s LAN port to the corresponding port on your Modem or Router using a LAN cable. Use a commercially available straight LAN cable (Category 5/CAT5 or better with RJ45 connector).

By connecting the unit to broadband Internet, you can use a disc that offers BD-Live function (see page 34).

Cautions:

When plugging or unplugging the LAN cable, hold the plug portion of the cable. When unplugging, do not pull on the LAN cable but unplug while pressing down on the lock.

Do not connect a modular phone cable to the LAN port.

Since there are various connection configurations, please follow the specifications of your telecommunication carrier or internet service provider.

Notes:

• Depending on the internet service provider (ISP), the number of devices that can receive internet service may be limited by the applicable terms of service. For details, contact your ISP.

• Our company is not responsible for any malfunction of the player and/or the internet connection feature due to communication errors/malfunctions associated with your broadband internet connection, or other connected equipment.

• Our company is not responsible for any trouble in your internet connection.

• The features of BD-ROM discs made available through the Internet Connection feature are not created or provided by our company, and our company is not responsible for their functionality or continued availability. Some disc related material available by the Internet Connection may not be compatible with this player. If you have questions about such content, please contact the producer of the disc.

• Some internet contents may require a higher bandwidth connection.

• Even if the player is properly connected and configured, some internet contents may not operate properly because of internet congestion, the quality or bandwidth of your internet service, or problems at the provider of the content.

• Some internet connection operations may not be possible due to certain restrictions set by the Internet service provider (ISP) supplying your broadband Internet connection.

• Any fees charged by an ISP including, without limitation, connection charges are your responsibility.

• A 10 Base-T or 100 Base-TX LAN port is required for connection to this player. If your internet service does not allow for such a connection, you will not be able to connect the player.

• You must use a Router to use xDSL service.

• A DSL modem is required to use DSL service and a cable modem is required to use cable modem service. Depending on the access method of and subscriber agreement with your ISP, you may not be able to use the internet connection feature contained in this player or you may be limited to the number of devices you can connect at the same time. (If your ISP limits subscription to one device, this player may not be allowed to connect when a PC is already connected.)

• The use of a “Router” may not be allowed or its usage may be limited depending on the policies and restrictions of your ISP. For details, contact your ISP directly.

• Your ISP may protect this player from being connected to network when confirming MAC ADDRESS. In that case, contact your ISP to request to initialize MAC ADDRESS.

Router

Broadband

Service

Rear of the player

Resolution Setting

The player provides several output resolutions for HDMI OUT and COMPONENT VIDEO OUT jacks. You can change the resolution using [Setup] menu or pressing the RESOLUTION button in Home menu or Setup Menu.

Note:

Since several factors affect the resolution of video output, see “Available resolution according to resolution setting”

Auto – If the HDMI OUT jack is connected for TVs providing display information (EDID), automatically selects the resolution best suited to the connected TV. If the COMPONENT VIDEO OUT is only connected, this changes the resolution to 1080i as default resolution.

1080p – Outputs 1080 lines of progressive video.

1080i – Outputs 1080 lines of interlaced video. 720p – Outputs 720 lines of progressive video. 480p – Outputs 480 lines progressive video. 480i – Outputs 480 lines of interlaced video.

How to change the resolution using RESOLUTION button

Press RESOLUTION repeatedly in [Home Menu] and [Setup] Menu to change the resolution. The display window will show you the current resolution.

How to change the resolution using Setup menu

1. Press HOME and the Home Menu appears.

2. Select [Setup] and press ENTER. The Setup menu appears.

3. Use v / V to select [DISPLAY] option then press B to move to the second level.

4. Use v / V to select the [Resolution] option then press B to move to the third level.

5. Use v / V to select the desired resolution then press ENTER to confirm your selection.

Note:

If the video signal from the HDMI OUT jack is not output from the TV screen when [Resolution] is set to [Auto], change the video output resolution by pressing RESOLUTION button.

Available resolution according to the resolution setting

Notes:

• Depending on your display, some of the resolution

settings may result in the picture disappearing or an abnormal picture appearing. In this case, press HOME key then RESOLUTION repeatedly until the picture re-appear.

• This player supports simultaneous output of all

video out jacks. The resolution of the HDMI output may not be the same as the resolution output on the component video output.

• When the non-copy protected media is playing back

Video Output HDMI OUT COMPONENT VIDEO OUT

Resolution HDMI HDMI

connected disconnected

480i 480p 480i 480p 480p 480p 720p 720p 720p

1080i 1080i 1080i

1080p / 24Hz 1080p / 24Hz 480i 1080i

1080p / 60 Hz 1080p / 60Hz 480i 1080i

• When the copy protected media is playing back

Video Output HDMI OUT COMPONENT VIDEO OUT

Resolution HDMI HDMI

connected disconnected

480i 480p 480i 480p 480p 480p 720p 720p 480i 480p

1080i 1080i 480i 480p 1080p / 24Hz 1080p / 24Hz 480i 480p 1080p / 60Hz 1080p / 60Hz 480i 480p

RESOLUTION button

Installation and

Setup

HDMI OUT connection

• For the 480i resolution setting, real output resolution of HDMI OUT will change to 480p.

• If you select a resolution manually and then connect the HDMI jack to TV and your TV does not accept it, the resolution setting is set to [Auto].

• If you select a resolution that your TV does not accept, the warning message will appear. After resolution change, if you cannot see the screen, please wait 20 seconds and the resolution will automatically revert back to the previous resolution.

• The 1080p video output frame rate may be automatically set to either 24Hz or 60Hz depending both on the capability and preference of the connected TV and based on the native video frame rate of the content on the BD-ROM disc. (Refer to “1080p Display Mode” on page 22.)

COMPONENT VIDEO OUT connection

• For the 720p, 1080i, 1080p resolution setting with protected media, real output resolution of COMPONENT VIDEO OUT will be outputted at 480p resolution.

• Even if the resolution is set to 1080p, non-copy protected BDs and DVDs playback are outputted at 1080i resolution.

• BD or DVD video stream could prevent up-scaling on analogue output.

VIDEO OUT connection

• The resolution of the VIDEO OUT jack is always outputted at 480i resolution.

Setting the sound mode

You can select a suitable sound mode. Press SOUND repeatedly until the desired mode appears on the front panel display or the TV screen. The setting the sound mode is not available when [HDMI Audio] is set to [On] (see page 23).

[Bypass] mode: Software with multichannel surround audio signals is played according to the way it was recorded.

[Bass Boost] mode: Reinforce the bass sound effect from front left and right speaker and subwoofer.

[PL ll Movie] mode: Performs Pro Logic ll movie mode decoding to the input signal and produces five full-bandwidth output channels from 2 channel sources. This setting is ideal for watching videos of overdubbed or old movies. This mode is available only to 2 channel sources.

[PL ll Music] mode: Performs Pro Logic ll music mode decoding to the input signal and produces five full-bandwidth output channels from 2 channel sources. This setting is ideal for normal stereo sources such as CD. This mode is available only to 2 channel sources.

[News] mode: This mode makes voice sound clear, improving the quality of voice sound. This mode outputs sound from the front left and right speakers, center speaker, and subwoofer.

[Drama] mode: You can enjoy more dynamic sound with improved center channel while watching a television drama. This mode outputs sound from the front left and right speakers, center speaker, and subwoofer.

[Sports] mode: This mode produces dynamic sound expansion for the sports program.

[Game] mode: You can enjoy more virtual sound while playing video games.

[Concert] mode: Creates the sound of concert hall.

[Music EXP] mode: When listening to MP3 files or other compressed music, you can enhance the sound. This mode is available only to 2 channel sources.

Note:

Only [Bypass] mode is available when HDMI IN’s audio is a compressed bitstream of Dolby Digital Plus, Dolby TrueHD and DTS-HD.

Adjust the speaker level settings

You can adjust the sound level of each speaker. Press SPK LEVEL repeatedly to select a desiredspeaker to set. Press AUDIO VOL. (+/-) to adjust the sound level of the selected speaker while the level setting menu is displayed on the front panel display or the TV screen. Repeat and adjust the sound level of the other speakers.

Using the late night function

You can compress the dynamic range of the sound track. Press DRC repeatedly. This may be useful when you want to watch movies at low volumes late at night.

[DRC OFF]: Late night function off. [DRC ON]: Reduction in dynamic range.

Notes:

• The late night function may be less effective or have no effect depending on the source.

• During the late night mode is on, the lighting of the center of the unit is turned off and the front panel display is dimmed.

Using the sleep timer

You can set the system to turn off at a preset time, so you can fall asleep listening to music.

- Press SLEEP repeatedly to select the desired time

period options (in minutes): (Dimmer on

Sleep

timer value

Dimmer off)

Dimmer on:

The lighting of the center of the unit is

turned off and the front panel display is dimmed.

- To view the time countdown to the standby mode,

press SLEEP again.

- To deactivate the sleep timer, press SLEEP until the

previous status is displayed or press

1/'

to switch

the unit to standby.

Installation and

Setup

Using a USB Flash Drive

This unit can play the movie, music and photo files contained on the USB Flash Drive.

Insert/Remove a USB Flash Drive

Inserting a USB Flash Drive

Insert straight-in until it fits into place.

Removing a USB Flash Drive

Withdraw the USB Flash Drive carefully.

Using the USB Flash Drive

1. Connect a USB Flash Drive.

2. Press HOME on the Remote Control.

3. Select [Music], [Photo] or [Movie] option then press ENTER.

4. When the menu that select the media is appeared. Select [USB] then press ENTER. [MOVIE], [MUSIC] or [PHOTO] menu appears. Details for the menu are on pages 36-40.

Notes:

This player supports USB flash memory/external HDD formatted in FAT16, FAT32 and NTFS when accessing files (music, photo, movie). However, for BD-Live, only FAT16 and FAT32 formats are supported. Please use the Internal Flash Memory or USB flash memory/external HDD formatted in either FAT16 or FAT32 when using BD-Live.

The USB Flash Drive can be used for the local storage for enjoying BD-Live discs with Internet

Do not extract the USB Flash Drive during operation (play, etc.).

A USB Flash Drive which requires additional programme installation when you have connected it to a computer is not supported.

USB Flash Drive: USB Flash Drive that support USB1.1 and USB2.0.

Movie Files (DivX), Music files (MP3/WMA) and photo files (JPEG/PNG) can be played. For details of operations on each file, refer to relevant pages.

Regular back up is recommended to prevent data loss.

If you use a Card Reader, USB extension cable or USB HUB, the USB Flash Drive may not be recognized.

Some USB Flash Drives may not work with this unit.

Digital camera and mobile phone are not supported.

USB Port of the unit cannot be connected to PC. The unit cannot be used as a storage device.

When take off an active device connecting to USB port, please take it off after switching off the unit.

When connecting with a USB cable, use the USB

2.0 cable those length is less than 1 m.

Using the Home Menu

From the Home Menu screen you can access all the Media for playback and setting of the unit.

1. Press HOME and the [Home Menu] appears.

2. Use

bb/BB

to select the desired option then press

ENTER. [Movie] – Start video media’s playback or

displays the [MOVIE] menu. (page 36) [Photo] – Displays [PHOTO] menu. (page 39) [Music] – Displays [MUSIC] menu. (page 37) [Setup] – Displays [Setup] menu. (page 22)

Note:

When a disc and USB Flash Drive have the contents, it can choose those menus.

About Setup menu:

Menus Buttons Operations

Moves the cursor. Activates the selected item. Closes the menu.

Tip:

If you select the [Movie], [Photo] or [Music] option when a USB Flash Drive is connected and a disc is inserted simultaneously, the menu for selecting a media will appear. Select a media then press ENTER.

For example:

Notes:

The unit will be in stop mode then the [Home Menu] will appear if you press HOME during playback.

If you insert a DVD or an unplayable disc that is formatted as ISO9660 or UDF, the [Movie], [Photo] or [Music] option can be selected in the [Home Menu]. But you cannot play it.

If the applicable file is not included, the "Empty" is appeared.

USB Flash Drive

Initial Settings

By using the Setup menu, you can make various adjustments to items such as picture and sound. You can also set a language for the subtitles and the Setup menu, among other things. For details on each Setup menu item, see pages 22 to 26.

To display and exit the Menu:

Press HOME and the Home Menu appears. Select [Setup] then press ENTER, and Setup menu appears. Press RETURN or HOME to exit the Setup menu.

To go to the next level:

Press B on the Remote Control.

To go back to the previous level:

Press b on the Remote Control.

General Operation

1. Press HOME and the Home Menu appears.

2. Select [Setup] and press ENTER. The Setup menu appears.

3. Use v / V to select the desired option then press B to move to the second level. The screen shows the current setting for the selected item, as well as alternate setting(s).

4. Use v / V to select the second desired option then press B to move to the third level.

5. Use v / V to select the desired setting then press ENTER to confirm your selection. Some items require additional steps.

6. Press RETURN or HOME to exit the Setup menu.

[DISPLAY] Menu

TV Aspect Ratio

[4:3 Letter Box] – Select when a standard 4:3

TV is connected. Displays theatrical images with masking bars above and below the picture.

[4:3 Pan Scan] –

Select when a standard 4:3 TV is connected. Displays pictures cropped to fill your TV screen. Both sides of the picture are cut off.

[16:9 Original] – Select when a 16:9 wide TV is connected. The 4:3 picture is displayed with an original 4:3 aspect ratio, with black bars appearing at the left and right sides.

[16:9 Full] – Select when a 16:9 wide TV is connected. The 4:3 picture is adjusted horizontally (in a linear proportion) to fill the entire screen.

Notes:

• You cannot select [4:3 Letter Box] and [4:3 Pan Scan] option when the resolution is set to higher than 720p.

• This function may not work depending on the contents to play.

Resolution

Sets the output resolution of the Component and HDMI video signal. Refer to “Resolution Setting” on page 18 for details about the resolution.

1080p Display Mode

When the resolution is set to 1080p, select [24Hz] for smooth presentation of film material (1080p/24Hz) with an HDMI-equipped display compatible with 1080p/24Hz input.

Notes:

• When you select [24Hz], you may experience some picture disturbance when the video switches video and film material. In this case, select [60Hz].

• Even when [1080p Display Mode] is set to [24Hz], if your TV is not compatible with 1080p/24Hz, the actual frame frequency of the video output will be 60 Hz.

HDMI Color Setting

Select the type of output from the HDMI OUT jack. For this setting, please refer to the manuals of your display device.

[YCbCr] – Select when connecting to an HDMI display device.

[RGB] – Select when connecting to an RGB display device.

Note:

When you connect the HDMI OUT jack to DVI display device, the [HDMI Color Setting] will automatically switch to [RGB].

Installation and

Setup

[LANGUAGE] Menu

Display Menu

Select a language for the [Setup] menu and onscreen display.

Disc Menu / Disc Audio / Disc Subtitle

Select the language you prefer for the audio track (disc audio), subtitles, and the disc menu.

[Original] – Refers to the original language in which the disc was recorded.

[Other] – Press ENTER to select another language. Use number buttons then ENTER to enter the corresponding 4-digit number according to the language code list on page 42.

[Off] (for Disc Subtitle) – Turn off Subtitle.

Note:

Depending upon the disc, your language setting may not work for some discs.

[AUDIO] Menu

Speaker Setup

To obtain the best possible sound, use the Speaker Setup display to specify the volume of the speakers you have connected and their distance from your listening position. Use the Test to adjust the volume of the speakers to the same level.

[Speaker] – Select a speaker that you want to adjust.

[Volume] – Adjust the output level of each speaker. Be sure to set “Test” to “All” for easy adjustment.

[Distance] – Adjust the distance between each speaker and the listening position.

[Test] – The speakers will emit a test tone. All: The test tone is emitted from each speaker in sequence.

To save your settings, press ENTER and select [Yes] by pressing bb/ BB.

HD AV Sync

Sometimes Digital TV encounters a delay between picture and sound. If this happens you can compensate by setting a delay on the sound so that it effectively ‘waits’ for the picture to arrive: this is called HD AV Sync. Use v V to scroll up and down through the delay amount, which you can set at anything between 0 and 300m sec. The delay will vary depending on which digital TV channel you are on. If you change channel you may need to readjust the HD AV Sync.

HDMI Audio

You can set TV speaker output for the audio signal from the HDMI OUT jack.

[Off] – Audio signals are output to the system speakers only. [On] – Audio signals are output from the TV’s speaker and the system’s front left and right speakers and subwoofer.

Note:

When [HDMI Audio] is set to [On], the sound mode is switched to [BYPASS] automatically.

[LOCK] Menu (Parental Control)

The [LOCK] settings affect only BD and DVD playback.

To access the any features in [LOCK] settings, you must enter the 4-digit security code you have created. If you have not entered a password yet, you are prompted to do so. Enter a 4-digit password and press ENTER. Enter it again and press ENTER to verify.

Password

You can create, change or delete the password.

[New] – Enter a 4-digit password and press ENTER. Enter it again and press ENTER to create a new password. [Change] – Enter the current password and press ENTER. Enter a 4-digit password and press ENTER. Enter it again and press ENTER to create a new password. [Delete] – Enter the 4-digit password and press ENTER to delete the password.

Tip:

If you make a mistake before pressing ENTER, press CLEAR. Then input the correct password.

If you forget your password

If you forget your password, you can clear it using the following steps:

1 Remove any disc that might be in the player. 2 Highlight [Password] in the [LOCK] option. 3 Use Number buttons to enter “210499”. The

password is cleared.

DVD Rating

Blocks playback of rated disc based on their content. (Not all discs are rated.)

[Rating 1-8] – Rating one (1) has the most restrictions and rating eight (8) is the least restrictive.

[Unlock] – If you select unlock, parental control is not active and the disc plays in full.

BD Rating

Set an age limit of BD-ROM play. Use number buttons to input an age limit for BD-ROM viewing.

[255] – All BD-ROM can be played. [0-254] – Prohibits play of BD-ROM with

corresponding ratings recorded on them.

Notes:

• The [BD rating] will be applied only for the BD disc that containing the Advanced Rating Control.

Area Code

Enter the code of the area whose standards were used to rate the DVD video disc, based on the list on page 42.

Installation and

Setup

[NETWORK] Menu

The [NETWORK] settings are needed to use the BD Live and feature. Some BD-ROM discs may enable you to access special BD-ROM sites, if you connect the player to the Internet. For example, if a BD-ROM site includes content such as links to future movie trailers, you can watch the downloaded on-line content on the player. You do not need to connect to a PC to use this function.

Preparations:

• This feature requires an always-on broadband internet connection. (see page 17)

• A BD-ROM disc compatible with this feature is required. Not all BD-ROM discs are compatible.

Connection Setting

If you have connected this player to a local area network (LAN), the player needs to be set up for network communication. (See “Internet connection” on pages 17)

Connection Status

If you want to check the network status on this player, select the [Connection Status] options and press B or ENTER to check whether a connection to the network and the internet have been established.

BD-LIVE connection

You can restrict Internet access when BD-Live functions are used.

[Permitted] – Internet access is permitted for all BD-Live contents.

[Partially permitted] – Internet access is permitted only for BD-Live contents which have content owner certificates. Internet access and AACS Online functions are prohibited for all BD-Live contents without a certificate.

[Prohibited] – Internet access is prohibited for all BD-Live contents.

[OTHERS] Menu

Skin

Changes the background of the initial screen.

Initialize

You can reset the player to its original factory settings, initialize the BD storage or deactivate the player.

[Factory Set] – If you need to, you can reset the player to all its factory settings. Some options cannot be reset. (Rating, Password and Area Code, etc.)

[BD Storage Clear] – Initializes the BD contents from the connected USB device.

DivX VOD

ABOUT DIVX VIDEO: DivX

® is a digital video

format created by DivX, Inc. This is an official DivX Certified device that plays DivX video. Visit www.divx.com for more information and software tools to convert your files into DivX videos. ABOUT DIVX VIDEO-ON-DEMAND: This DivX

Certified device must be registered in order to play DivX Video-on-Demand (VOD) content. To generate the registration code, locate the [DivX VOD] section in the [Setup] menu. Go to vod.divx.com with this code to complete the registration process and learn more about DivX VOD.

[DivX reg. Code] – Displays the registration code of your player. [Deactivate] – Deactivate your player and display the deactivation code.

Note:

All the downloaded videos from DivX

VOD can only

be played back on this unit.

Installation and

Setup

Listening to music from your portable audio player

You can enjoy the sound of your portable audio player from the speakers of the system.

1. Connect the headphones (or line out ) jack

of the portable audio player into the PORT. IN on the rear panel of this unit:

2. Press

1/' to turn the power on.

3. Press INPUT to select [PORTABLE] option.

4. Press AUDIO VOL. (-) to turn down the volume

of this unit.

5. Turn the portable audio player on and start

it playing.

6. Adjust the volume of this unit and your portable

audio player.

Listening to the sound from your component

You can enjoy the sound of your component with the analog audio output jacks from the speakers of the system.

1. Connect the analog audio output jacks of your component into the AUX L/R (INPUT) on the rear panel of this unit:

2. Press

1/' to turn the power on.

3. Press INPUT to select [AUX] option.

4. Press AUDIO VOL. (-) to turn down the volume of this unit.

5. Turn your component on.

6. Use AUDIO VOL. (+/-) to adjust the volume.

To the audio output jacks of your component (TV, VCR, etc.)

3.5 mm stereo miniplug cable

Using HDMI IN jacks

You can enjoy the pictures and sound of your component with the HDMI OUT jack.

1. Connect the HDMI OUT jack of your component into the HDMI IN 1 or 2 jack on the rear panel of this unit.

2. Press

1/' to turn the power on.

3. Press INPUT to select

[HDMI IN 1] or [HDMI IN 2]

option.

4. Press AUDIO VOL. (-) to turn down the volume of this unit.

5. Turn your component on.

6. Use AUDIO VOL. (+/-) to adjust the volume of this unit.

Note:

• You cannot change the video resolution at the

HDMI IN 1/2 mode. Change the video resolution of the connected component.

• The setting of the sound mode is not available

when Dolby Digital Plus, Dolby TrueHD and DTS-HD are played at HDMI IN 1/2 mode.

• If the video output signal is abnormal when your

personal computer is connected to HDMI IN 1/2 jack, change the resolution of your personal computer to 480p, 720p, 1080i or 1080p.

Using DIGITAL AUDIO IN jacks

You can enjoy the sound of your component with the digital optical or coaxial output jack from the speakers of the system.

1. Connect the optical or coaxial output jack of your component into the OPTICAL or COAXIAL (DIGITAL AUDIO IN) jack on the rear panel of this unit.

2. Press

1/' to turn the power on.

3. Press INPUT to select [OPTICAL] or [COAXIAL] option.

4. Press AUDIO VOL. (-) to turn down the volume of this unit.

5. Turn your component on.

6. Use AUDIO VOL. (+/-) to adjust the volume.

To the HDMI OUT jack of your component (set-top box, digital satellite receiver, video game machine, etc.)

To the digital optical output jack of your component

To the digital coaxial output jack of your component

Installation and

Setup

Antenna Connection

Connect the supplied FM/AM antenna for listening to the radio.

Connect the AM Loop antenna to the AM antenna connector.

Connect the FM Wire antenna to the FM antenna connector.connector.

Notes:

To prevent noise pickup, keep the AM Loop antenna away from the unit and other components.

Be sure to fully extend the FM wire antenna.

After connecting the FM Wire antenna, keep it as horizontal as possible.

FM Wire Antenna (supplied)

AM Loop Antenna (supplied)

Operations

General playback features

1. Load your chosen disc in the tray, with the playback side down.

2. Start playback using the HOME menu (see page 21).

Buttons Operations

OPEN / CLOSE (Z) Opens or closes the disc tray. N (PLAY) Starts the playback.

ENTER Acknowledges the selection on the menu screen (Disc

menu, Title menu, POP-UP menu, etc.).

x (STOP) Stops the playback.

The button on the unit works as “ENTER”.

The unit records the stopped point, depending on the disc. “Xx” appears on the screen briefly. Press N (PLAY) to resume playback (from the scene point). If you press x (STOP) again or unload the disc (“x” appears on the screen.), the unit will clear the stopped point. (Xx = Resume Stop, x = Complete Stop)

Notes:

• The resume point may be cleared when a button is pressed (for example; STANDBY, OPEN/CLOSE, etc).

• On BD-Video discs including BD-J, the resume play function does not work.

• On BD-ROM interactive title, the unit will be in Complete Stop mode if you press x (STOP) once during playback.

X (PAUSE) During playback, press X (PAUSE) to pause playback.

Tip: During Audio CD or MP3/WMA playback, press X (PAUSE) once again to resume playback.

Press X (PAUSE) repeatedly to play Frame-by-Frame.

. / > (SKIP) During playback, press . or > to go to the next

chapter/track/file or to return to the beginning of the current chapter/track/file. Press . twice briefly to step back to the previous chapter/track/file.

m / M (SCAN) During playback, press SCAN (m or M) repeatedly

to select the required scan speed.

- DVD, BD, AVCHD, DivX: 5 steps,

- Audio CD, MP3, WMA: 3 steps

While the playback is paused, press SCAN M repeat- edly to play in slow motion (4 steps, forward only).

TITLE/POP-UP If the current DVD or BD-ROM disc has a menu, the Title

menu or Popup menu appears on the screen. Depending on the disc, the menu may not be available.

DISC MENU The menu appears on the screen. Depending on the

disc, the menu may not be available.

Continued t

Discs

AVCHD

BDDVD

AVCHD

BDDVD

DivX

AVCHD

BDDVD

ALL

DivX

AVCHD

BDDVD

ALL

WMA

DivX

AVCHD

MP3

ACDDVDBD

ALL

DVDBD

ALL

Operation

General playback features (Continued)

Buttons Operations

REPEAT Playing repeatedly:

During playback, press REPEAT repeatedly to select a desired repeat mode. DVD, BD, AVCHD: Chapter/Title/Off Audio CD, MP3, WMA: Track/All/Off

Note:

If you press > once during Repeat Chapter/Track playback, the repeat playback cancels.

Repeating a specific portion (A-B):

Selected portion will be repeated continually. Press REPEAT to select [A-] at the beginning of the portion you wish to repeat and press ENTER at the end of the portion. Your selected portion will be repeated continually. You cannot select a portion less than 3 seconds. To return to normal playback, press REPEAT repeatedly to select [OFF].

Note:

You cannot select a portion less than 3 seconds.

SUBTITLE During playback, press SUBTITLE repeatedly to select a

desired subtitle language.

Note:

Some discs allow you to change subtitle selections only via the disc menu. If this is the case, press TITLE/POP-UP or DISC MENU button and choose the appropriate subtitle from the selections on the disc menu.

Notes on general features:

• When you turn on the player or replace a disc, the player returns to the initial default setting. Depending on a disc, a specific type of audio the disc has is output.

• Depending on the pre-recorded contents of the BD-ROM, some functions may not be available or may be operated differently than other media.

Discs

DivX

AVCHD

BDDVD

ACDBDDVD

AVCHD

WMAMP3

ACDBDDVD

Additional features

If a disc menu screen is displayed

The menu screen may be displayed first after loading a disc which contains a menu.

Use b / B / v / V buttons to select the title/chapter you want to view, then press ENTER to start playback.

Last Scene Memory

This unit memorizes last scene from the last disc that is viewed. The last scene remains in memory even if you remove the disc from the unit or switch off the unit. If you load a disc that has the scene memorized, the scene is automatically recalled.

Notes:

• Settings are stored in memory for use any time.

• This unit does not memorize settings of a disc if you switch off the unit before commencing to play it.

• Last Scene Memory function for a previous disc is erased once a different disc is played.

• This function may not work depending on the disc.

Marker Search

To enter a Marker

You can start playback from up to nine memorized points. To enter a marker, press MARKER at the desired point on the disc. The Marker icon appears on the TV screen briefly. Repeat to enter up to nine markers.

To Recall or Clear a Marked Scene

Press SEARCH and the search menu appears on the screen. Press a number button to select a marker number that you want to recall. Playback starts from the marked scene.

Press V to highlight a marker number. Use b / B to select a marked scene that you want to recall or clear. Press ENTER and playback starts from the marked scene. Press CLEAR and the marked scene is erased from the search menu.

Notes:

• This function may not work on some discs or titles.

• All marked points are cleared if you press STOP (x) twice (complete stop), the title is changed or

if you unload the disc.

DivX

AVCHD

DVD

AVCHD

DVDBD

Operation

Hearing a different audio

During playback, press DISPLAY to display the playback menu. Use v V to select the [Audio] option then use bB to select desired audio language or audio track.

Notes:

• Some discs allow you to change audio selections only via the disc menu. If this is the case, press TITLE/POP-UP or DISC MENU button and choose the appropriate audio from the selections on the disc menu.

• Immediately after you have switched sound, there may be a temporary discrepancy between the display and actual sound.

• On BD-ROM disc, the multi audio format (5.1CH or 7.1CH) is displayed with [MultiCH] in the on-

screen display.

Using the search menu

During playback, press SEARCH to display the search menu. Press bBto skip the playback 15 seconds forward or backward.

Tip:

You can select a point that you want to skip by pressing and holding b / B button.

Notes:

• This function may not work on some disc or titles.

Using Color (R, G, Y, B) Buttons

These buttons are available only during BD-J contents playback. Use the appropriate buttons as indicated by the display. Depending on the disc contents, the functions of each button may differ.

Screen Saver

The screen saver appears when you leave the player in Stop mode for about five minutes.

Changing content list view

On the [Movie], [Music], [Photo] menu, you can change the content list view by pressing DISPLAY repeatedly.

Note:

The equalizer will be disappeared when you change the music contents list view.

DivX

WMAMP3

ACD

DivX

AVCHD

DVDBD

DivX

AVCHD

DVDBD

third push

first push

second push

Displaying Disc Information On-Screen

You can display various information about the disc loaded on-screen.

1. Press DISPLAY to show various playback information. The items displayed differ depending on the disc type or playing status.

2. During BD-ROM or DVD playback, you can select an item by pressing v / V and change or select the setting by pressing b / B.

Title/Track – Current title/track number/total number of titles/tracks.

Chapter – Current chapter number/total number of chapters.

Time – Elapsed playing time.

Audio – Selected audio language or channel.

Subtitle – Selected subtitle.

Angle – Selected angle/total number of angles.

Notes:

• If no button is pressed for a few seconds, the onscreen display disappears.

•

A title number cannot be selected on some discs.

• An item may not be available on some discs or titles.

• If BD interactive title is playing back, some setting information is displayed on the screen but prohibited to be changed.

Enjoying BD-LIVE™ or BONUS VIEW™ in BD-Video

This unit allows you to enjoy functions such as picture-in-picture, secondary audio and Virtual packages, etc., with BD-Video supporting BONUSVIEW (BD-ROM version 2 Profile 1 version 1.1/ Final Standard Profile). In addition to the BONUSVIEW function, BD-Video supporting BD-Live (BD-ROM version 2 Profile 2) that has a network extension function allows you to enjoy more functions such as online games by connecting this unit to the Internet.

Enjoying BD-Live discs with Internet

This unit supports BD-Live, a new BD-Video function that allows you to use the following interactive functions when connected to the Internet. (The usable functions and the operating method may vary with each disc. For details, refer to the instructions for the disc.) – Additional contents such as movie’s trailer,

subtitles and BD-J, etc. can be downloaded to the USB Flash Drive to play them.

–

Special video data, etc. may be played back while they are being downloaded to a USB Flash Drive.

Preparations:

• The unit must be connected to the Internet and setup to use the BD-Live functions (see page 25).

• A USB Flash Drive is required to use this function. Connect a USB Flash Drive (see page 21).

• The free space in the USB Flash Drive must be more than 1GB.

• Please connect USB Flash Drive before playback the Disc.

Caution:

• Do not extract the connected USB Flash Drive

while content is being downloaded or a Blu-ray disc is still in the disc tray. Doing so may damage the connected USB Flash Drive and BD-Live features may not operate properly with the damaged USB Flash Drive anymore. If the connected USB Flash Drive seems damaged from such an action, you can format the connected USB Flash Drive from the PC and reuse it with this player.

• BD-Live on-line contents may not be download-

ed because of insufficient space in the USB Flash Drive. In this case, please change USB Flash Drive with sufficient space or erase the data using [BD Storage Clear] option on the setup menu (See page 26 for details.)

Notes:

• Some BD-Live contents may be restrictively

accessed in some territories by contents provider's own decision.

DivX

AVCHD

BDDVD

Operation

• It may take up to several minutes to load and start enjoying BD-Live contents.

• Depending on the disc, the BD-Live function may not be operated if [BD-LIVE connection] option is set to [Partially Permitted]. In this case, set [BD-LIVE connection] option to [Permitted] (See page 25.)

• The connection to the Internet may take time or the Internet may not be connected depending on the connection environment. It is required that you use a broadband connection.

• Do not remove the USB Flash Drive during oper-

ation. The USB Flash Drive may be damaged. Stop playback and turn off the menu beforehand.

Tip:

Special video data, etc. may be played back while they are being downloaded to a USB Flash Drive using one function of BD-Live. The playback may be paused depending on the communication environment. Some functions may be disabled to prevent skipping to sections that have not been downloaded, etc.

AACS Online

When discs supporting BD-Live are played back, the player or disc IDs may be sent to the content provider via the Internet. Services and functions to be provided differ depending on the disc. – You can be introduced to other similar movies if

you record your viewing history on the server by using these IDs.

– Game score histories can be saved.

Playing secondary video (picture-in-picture) and secondary audio

Secondary video can be played from a disc compatible with the picture-in-picture function. For the playback method, refer to the instructions for the disc. – To turn on/off secondary video, press PIP.

Secondary video is played. Press the button to turn it ON or OFF.

Notes:

• Discs may not always be played back according to

the settings on this unit, as certain playback formats are prioritized on certain discs.

• Only the primary video is played during

search/slow-motion or frame-by-frame.

• This function may not work depending on the disc.

Playing a movie

The player can play movie files on the disc/USB device and video contents recorded on a DVDRW(VR mode) discs. Before playing movie files, read “Movie file requirement”

Note:

• When the USB device is connected and a disc is inserted simultaneously, the menu for selecting a media will appear. Select a media then press ENTER.

• You can use various playback functions. Refer to pages 30-31.

• On the [MOVIE] menu, use (G) or (Y) color button to move to the previous or next page.

• Unfinalized DVD VR format discs may not be played in this player.

• Some DVD-VR disc are made with CPRM data by DVD RECORDER. This unit cannot support these kinds of discs.

• Some DivX files may not play, depending on the DivX format or the recording format.

• Press DISC MENU to move to the list menu.

• This player can not play BDAV files.

What is CPRM?

CPRM is a copy protection system (with scramble system) only allowing the recording of ‘copy once’ broadcast programs. CPRM stands for Content Protection for Recordable Media.

Notice for displaying the DivX subtitle

If the subtitle does not display properly, change the language code as described below.

1 Press and hold SUBTITLE for 3 seconds during

playback. The language code will appear.

2 Press SUBTITLE repeatedly to select another

language code until the subtitle is displayed properly and then press ENTER.

Movie file requirement

Movie file compatibility with this player is limited as follows:

Available resolution size: 1920 x 1080 (W x H) pixels File extensions: “.avi”, “.divx”, “.mpg”, “.mpeg”, “.mp4”, “.mkv”

Playable subtitle: SubRip (.srt / .txt), SAMI (.smi), SubStation Alpha (.ssa/.txt), MicroDVD (.sub/.txt), VobSub (.sub) SubViewer 1.0 (.sub), SubViewer

2.0 (.sub/.txt), TMPlayer (.txt), DVD Subtitle System (.txt)

Playable Codec format: “DIVX3.xx”, “DIVX4.xx”, “DIVX5.xx”, “XVID”, “DIVX6.xx” (Standard playback only), H.264/MPEG-4 AVC, DIVX-HD, MPEG1 SS, MPEG2 PS, MPEG2 TS

Playable Audio format: “Dolby Digital”, “DTS”, “MP3”, “WMA”, “AAC”, “AC3”

Sampling frequency: within 32-48 kHz (WMA), within 16-48 kHz (MP3)

Bit rate: within 20-320 kbps (WMA), within 32-320 kbps (MP3)

CD-R/RW, DVD±R/RW, BD-R/RE Format:

ISO 9660+JOLIET, UDF and UDF Bridge format Maximum Files/Folder: Less than 2000

• The movie file name and subtitle are limited to 180 characters.

• Not all the WMA and AAC Audio format is compatible with this unit.

• HD movie files contained on the CD or USB

1.0/1.1 may not played properly. BD, DVD or USB 2.0 are recommended to play back HD movie files.

• This player support H.264/MPEG-4 AVC profile Main, High at Level 4.1. For a file with higher level, the player will ask whether you want to play or not.

• This player does not support the file that are recorded with GMC*

or Qpel*2. Those are video encoding techniques in MPEG4 standard, like DivX or XVID have.

*1 GMC – Global Motion Compensation *2 Qpel – Quarter pixel

Operation

Listening to music

The player can play Audio CDs and MP3/WMA files. Before playing MP3/WMA files, read “MP3/WMA audio file requirement”.

Note:

• When the USB device is connected and a disc is inserted simultaneously, the menu for selecting a media will appear. Select a media then press ENTER.

• You can use various playback functions. Refer to pages 30-31.

Example) Audio CD

Tips:

• To go directly to any track or file and play, enter the track/file number using the numbered buttons (0-9).

• The playback may start automatically if the Audio CD inserted.

• Use v/V/b/B to select a folder then press ENTER and you can view the files in the folder. If you want to move to the upper or lower directory, use

v/V to move to the desired directory.

• On the [MUSIC] menu, use red or blue button to move to the first or the last file or track and green or yellow button to move to the previous or next page.

• The equalizer indicator is not coupled with the music in play back.

• If there is impossible code to express in the file name, it may be displayed as illegible.

MP3/WMA audio file requirement

File extensions: “.mp3”, “.wma” Sampling frequency: within 8-48 kHz (WMA),

within 11-48 kHz (MP3)

Bit rate: within 8-320 kbps (WMA, MP3) CD-R/RW, DVD±R/RW, BD-R/RE Format:

ISO 9660+JOLIET, UDF and UDF Bridge format Maximum Files/Folder: Less than 2000

(total

number of files and folders)

Notes on MP3/WMA file

• Depending on the size and number of the MP3/WMA files, it may take several minutes to read the contents of the media.

• This unit cannot support the ID3 Tag embedded in the MP3 file.

• The total playback time indicated on the screen may not correct for VBR files.

Presetting the Radio Stations

You can preset 50 stations for FM and AM (MW). Before tuning, make sure that you have turned down the volume.

1. Press TUNER to select FM or AM (MW).

2. Press TUNING.(-/+) to choose the station.

3. Press ENTER to memorize or clear the station.

Listening to the Radio

Preset radio stations in the unit memory first see “Presetting the radio stations”.

1. Press TUNER to select FM or AM (MW). The last received station is tuned in.

2. Press PRESET (-/+) repeatedly on the remote control to select the preset station you want. Each time you press the button, the unit tunes in one preset station at a time.

3. Adjust the volume pressing VOLUME (-/+) on the front panel or by pressing AUDIO VOL(-/+) on the remote control repeatedly.

To turn off the radio

Press 1/' to turn the unit off.

To listen to non-preset radio stations

Use manual or automatic tuning in the step 2.

For manual tuning, press TUNING.(-/+) repeatedly.

For automatic tuning, press and hold TUNING. (-/+) for about two seconds.

To select a preset radio station directly

You can use the number buttons on the remote control to select a preset radio station directly. For example, to listen to the preset station 4, press 4 on the remote control. To listen to the preset station 19, press 1 and then 9 (within 3 seconds).

For your reference

If an FM program is noisy

To appear “STEREO”, press MO./ST. Then press again this button to make “MONO” appear in the display window. There will be no stereo effect, but the reception will improve. Press the button again to restore the stereo effect.

To improve reception

Reorient the supplied antennas.

Operation

Viewing a photo

This unit can play a photo files. Before playing photo files, read “Photo file requirement”.

Note:

• When the USB device is connected and a disc is inserted simultaneously, the menu for selecting a media will appear. Select a media then press ENTER.

• You can start the slide show by pressing PLAY (N) while photo file is selected in the [PHOTO]

menu.

•

On the [PHOTO] menu, use red or blue button to move to the first or the last file and green or yellow button to move to the previous or next page.

• You can change the content list view by pressing DISPLAY repeatedly.

Photo file requirement

File extensions: “.jpg”, “.jpeg”, “.png” Recommended size:

Less than 4,000 x 3,000 x 24 bit/pixel Less than 3,000 x 3,000 x 32 bit/pixel

CD-R/RW, DVD±R/RW, BD-R/RE Format:

ISO 9660+JOLIET, UDF and UDF Bridge format

Maximum Files/Disc:

Less than 2000 (total number of files and folders)

Notes on Photo file

• Progressive and lossless compression photo image files are not supported.

• Depending on the size and number of the photo files, it may take several minutes to read the contents of the media.

Options during viewing a photo file in full screen

You can use various options during viewing a picture in full screen. Use v V b B to select an option and use the options as described below.

a Use bBto advance to the previous or next

file.

b Press ENTER to start or pause the slide

show.

c Press ENTER to play or pause the back-

ground music. This option is available after the background music is selected using [Music Select] option.

d Selects the background music.

1) Press ENTER and the menu will appear.

2) Use vVbBto select a media or folder that there are music file(s).

3) Press ENTER to confirm your selection.

e Press ENTER to rotate the picture clockwise.

This option is not available during slide show.

f Use green or yellow buttons to zoom in or

out the picture. You can move through the zoomed picture using vVbBbuttons.

Press RETURN to exit the [Zoom] menu and return to the normal picture size.

g Use vVto selects an option between

[Effect] or [Delay]. Use bBto adjusts and press ENTER to set

the selected option. [Effects] – You can apply various effects

when sliding photos.

OFF : Slide Show without any effect. Random : Slide show effects are applied

randomly. Slide : Slides a photo from various direction. Door : Photo will be appear like door open-

ing. Lattice : Photo will be appear from tiled

pieces to full screen image

[Delay] – You can set the photo delaying time while Slide Show.

h Press ENTER to exit the option menu.

To appear the menu again, press ENTER.

bcdefgh

Reference

Controlling a TV with the Supplied Remote Control

You can control the volume, input source, and power state of your JVC TV with the supplied Remote Control.

You can control your TV using the buttons below.

By pressing You can

TV POWER Turn the TV on or off. INPUT Switch the TV’s input

source between the TV and other input sources.

CH +/– Scan up or down

through memorized channels.

VOL +/– Adjust the volume of the

TV.

Note

Some functions may not work correctly depending on TV.

TV Control Buttons

Area Code

U.A.E AE Afghanistan AF Argentina AR Australia AU Austria AT Belgium BE Bhutan BT Bolivia BO Brazil BR Cambodia KH Canada CA Chile CL China CN Colombia CO Congo CG Costa Rica CR Croatia HR Czech Republic CZ Denmark DK Ecuador EC Egypt EG El Salvador SV

Area Code

Ethiopia ET Fiji FJ Finland FI France FR Germany DE Great Britain GB Greece GR Greenland GL Herd and Mcdonald Islands

HM Hong Kong HK Hungary HU India IN Indonesia ID Israel IL Italy IT Jamaica JM Japan JP Kenya KE Kuwait KW Libya LY Luxembourg LU

Area Code

Malaysia MY Maldives MV Mexico MX Monaco MC Mongolia MN Morocco MA Nepal NP Netherlands NL Netherlands Antilles AN New Zealand NZ Nigeria NG Norway NO Oman OM Pakistan PK Panama PA Paraguay PY Philippines PH Poland PL Portugal PT Romania RO Russian Federation RU

Area Code

Saudi Arabia SA Senegal SN Singapore SG Slovak Republic SK Slovenia SI South Africa ZA South Korea KR Spain ES Sri Lanka LK Sweden SE Switzerland CH Taiwan TW Thailand TH Turkey TR Uganda UG Ukraine UA United States US Uruguay UY Uzbekistan UZ Vietnam VN Zimbabwe ZW

Area Codes

Choose an Area code from this list.

Language Code

Abkhazian 6566 Afar 6565 Afrikaans 6570 Albanian 8381 Ameharic 6577 Arabic 6582 Armenian 7289 Assamese 6583 Aymara 6589 Azerbaijani 6590 Bashkir 6665 Basque 6985 Bengali; Bangla 6678 Bhutani 6890 Bihari 6672 Breton 6682 Bulgarian 6671 Burmese 7789 Byelorussian 6669 Cambodian 7577 Catalan 6765 Chinese 9072 Corsican 6779 Croatian 7282 Czech 6783 Danish 6865 Dutch 7876 English 6978 Esperanto 6979 Estonian 6984 Faroese 7079

Language Code

Fiji 7074 Finnish 7073 French 7082 Frisian 7089 Galician 7176 Georgian 7565 German 6869 Greek 6976 Greenlandic 7576 Guarani 7178 Gujarati 7185 Hausa 7265 Hebrew 7387 Hindi 7273 Hungarian 7285 Icelandic 7383 Indonesian 7378 Interlingua 7365 Irish 7165 Italian 7384 Japanese 7465 Javanese 7487 Kannada 7578 Kashmiri 7583 Kazakh 7575 Kirghiz 7589 Korean 7579 Kurdish 7585 Laothian 7679 Latin 7665 Latvian, Lettish 7686

Language Code

Lingala 7678 Lithuanian 7684 Macedonian 7775 Malagasy 7771 Malay 7783 Malayalam 7776 Maltese 7784 Maori 7773 Marathi 7782 Moldavian 7779 Mongolian 7778 Nauru 7865 Nepali 7869 Norwegian 7879 Oriya 7982 Panjabi 8065 Pashto, Pushto 8083 Persian 7065 Polish 8076 Portuguese 8084 Quechua 8185 Rhaeto-Romance 8277 Rumanian 8279 Russian 8285 Samoan 8377 Sanskrit 8365 Scots Gaelic 7168 Serbian 8382 Serbo-Croatian 8372 Shona 8378 Sindhi 8368

Language Code

Singhalese 8373 Slovak 8375 Slovenian 8376 Somali 8379 Spanish 6983 Sudanese 8385 Swahili 8387 Swedish 8386 Tagalog 8476 Tajik 8471 Tamil 8465 Tatar 8484 Telugu 8469 Thai 8472 Tibetan 6679 Tigrinya 8473 Tonga 8479 Turkish 8482 Turkmen 8475 Twi 8487 Ukrainian 8575 Urdu 8582 Uzbek 8590 Vietnamese 8673 Volapük 8679 Welsh 6789 Wolof 8779 Xhosa 8872 Yiddish 7473 Yoruba 8979 Zulu 9085

Language Codes

Use this list to input your desired language for the following initial settings: [Disc Audio], [Disc Subtitle] and [Disc Menu].

Reference

Symptom

No power.

The power is on, but the player does not work.

No picture.

No sound.

The player does not start playback.

The Remote Control does not work properly.

BD-Live feature does not work.

Possible Cause

• The power cord is disconnected.

• No disc is inserted.

• The TV is not set to receive DVD signal output.

• The video cable is not connected securely.

• The selected resolution is not capable with your TV.

• The equipment connected with the audio cable is not set to receive disc signal output.

•

The power of the equipment connected with the audio cable is turned off.

• The [AUDIO] options are set to the wrong position.

• The player is in reverse play, fast forward, slow motion or pause mode.

• The disc is upside down.

• An unplayable disc is inserted.

• The rating level is set.

• The disc was recorded on another unit and was not finalized.

• The Remote Control is not pointed at the remote sensor on the player.

• The Remote Control is too far from the player.

• External USB device is not connected.

• The connected USB device does not have enough space.

• Internet connection is not established.

• The [BD-LIVE connection] option in the [Setup] menu is set to [Prohibited].

Correction

• Plug the power cord into the wall outlet securely.

• Insert a disc. (Check the disc indicator in the display window is lit.)

• Select the appropriate video input mode on the TV.

• Connect the video cable securely.

• Select another resolution using RESOLUTION button.

• Select the correct input mode of the audio receiver so you can listen to the sound from the player.

• Turn on the equipment connected with the audio cable.

• Set the [AUDIO] options to the correct position (see page 23).

• Return to the normal playback.

• Insert the disc with the playback side down.

• Insert a playable disc. (Check the disc type and regional code.)

• Change the rating level.

• Finalize the disc on that unit.

• Point the Remote Control at the remote sensor of the player.

• Operate the Remote Control closer to the player.

• Connect a FAT16 or FAT32 formatted USB device to the USB port (see page 21).

• Secure at least 1GB free space in the USB device for using BD-Live features.

• Ensure that the unit is correctly connected to the local area network and can access the internet (see page

17).

• Set the [BD-LIVE connection] option to [Permitted].

Troubleshooting

Resetting the Player

If you observe any of the following symptoms.

•

When the Player is plugged in, but the power will not turn on or off.

•

When the display window is not working.

•

When the Player does not operate normally.

You can reset the Player as follows:

•

Press and hold the STANDBY button for more than five seconds. This will force the Player to power off. Press the STANDBY button again to turn the Player back on.

•

Unplug the power cord and then plug the power cord again after more than five seconds.

Symptom

Radio stations cannot be tuned in.

Possible Cause

• The signal strength of the stations is too weak (when tuning in with automatic tuning).

Correction

• Use direct tuning.

Troubleshooting

Reference

Specifications

General

Power requirements: AC 110 - 240 V, 50/60 Hz

Power consumption

(in operation): 130 W

(on standby): Less than 1W Dimensions (W x H x D): Approx. 430 x 76 x 379 mm without foot Net Weight (Approx.): 4.8 kg

Operating temperature:

41 °F to 95 °F (5 °C to 35 °C)

Operating humidity: 5 % to 90 %

Inputs/Outputs

VIDEO OUT: 1.0 V (p-p), 75 Ω, sync neg ative, RCA jack x 1 COMPONENT VIDEO OUT: (Y) 1.0 V (p-p), 75 Ω, sync negative, RCA jack x 1

(Pb)/(Pr) 0.7 V (p-p), 75 Ω, RCA jack x 2

HDMI OUT (video/audio): 19 pin (HDMI standard, Type A) HDMI IN (video/audio): 19 pin (HDMI standard, Type A) ANALOG AUDIO IN: 2.0 Vrms (1 kHz, 0 dB), 600 Ω, RCA jack (L, R) x 1 DIGITAL IN (COAXIAL): 0.5 V (p-p), 75 Ω, RCA jack x 1 DIGITAL IN (OPTICAL): 3 V (p-p), Optical jack x 1

PORT. IN: 0.5 Vrms (3.5 stereo jack) Bus power supply 5V 500 mA

Tuner FM Tuning Range: 87.5 - 108.0 MHz AM Tuning Range: 522 - 1,620 kHz

Amplifier Stereo mode: PEAK Power 155 W + 155 W (4Ω at 1 KHz)

RMS Power 130 W + 130 W (4Ω at 1 KHz, THD 10%)

Surround mode: Front

PEAK Power 155 W + 155 W (4Ω at 1 KHz) RMS Power 130 W + 130 W (4Ω at 1 KHz, THD 10%)

Center

PEAK Power 155 W (4Ω at 1 KHz) RMS Power 130 W (4Ω at 1 KHz, THD 10%)

Surround

PEAK Power 155 W + 155 W (4Ω at 1 KHz) RMS Power 130 W + 130 W (4Ω at 1 KHz, THD 10%)

Subwoofer

PEAK Power 225 W (3Ω at 60 Hz) RMS Power 180 W (3Ω at 60 Hz, THD 10%)

Note: Design and specifications are subject to change without prior notice.

Specifications

System

Laser: Semiconductor laser, wavelength: 405nm / 650 nm Signal system: Standard PAL/NTSC color TV system Frequency response: 20 Hz to 20 kHz (48 kHz, 96 kHz, 192 kHz sampling) Signal-to-noise ratio: More than 100 dB (ANALOG OUT connectors only) Harmonic distortion: Less than 0.008% Dynamic range: More than 95 dB

LAN port: Ethernet jack x 1, 10BASE-T/100BASE-TX

Speakers

Front/ Rear speaker

Type: 1 Way 1 speaker Impedance Rated: 4Ω Input Power: 155 W Max. Input power: 310 W Net Dimensions (W x H x D): 111 x 209 x 83 mm Net Weight: 0.8 kg

Center speaker

Type: 1 Way 1 speaker Impedance Rated: 4Ω Input Power: 155 W Max. Input power: 310 W Net Dimensions (W x H x D): 301 x 118 x 83 mm Net Weight: 0.9 kg

Passive Subwoofer

Type: 1 Way 1 speaker Impedance Rated: 3Ω Input Power: 225 W Max. Input power: 450 W Net Dimensions (W x H x D): 236 x 435 x 391 mm Net Weight: 5.7 kg

Accessories

Speaker cable (6), Remote control (1), Battery (1), FM antenna (1), AM antenna(1), Video cable (1)

Reference

Open source software notice

This product includes

• OpenSSL library :

– cryptographic software written by Eric Young (eay@cryptsoft.com). – software written by Tim Hudson (tjh@cryptsoft.com). – software developed by the OpenSSL Project for use in the OpenSSL Toolkit. (http://www.openssl.org)

• Libpcap This product includes other open source software.

Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the "Software"), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions:

THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.

TH-BD50

0909SKMLGEEGL

P/N: MFL62863582

JVC TH-BD50, LVT2099-029A, SP-THBD50F, XV-THBD50, SP-THBD50W User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual

Introduction

About the Symbol Display

Symbols Used in this Manual

Notes on Discs

Moisture Condensation

Handling the Unit

Playable Discs

Regional Code

BD-ROM Disc Features

Compatibility Notes

Certain System Requirements

Notice for language setting

Front Panel

Rear Panel

Remote Control

Remote Control Operation

Attaching the speakers to the player

Positioning the System

Connections to Your TV

Installation and Setup

HDMI connection

Internet connection

Resolution Setting

Setting the sound mode

Adjust the speaker level settings

Using the late night function

Using the sleep timer

Using a USB Flash Drive

Using the Home Menu

Initial Settings

General Operation

[DISPLAY] Menu

[LANGUAGE] Menu

[AUDIO] Menu

[LOCK] Menu (Parental Control)

[NETWORK] Menu

[OTHERS] Menu

Listening to music from your portable audio player

Listening to the sound from your component

Using HDMI IN jacks

Using DIGITAL AUDIO IN jacks

Antenna Connection

Operations

General playback features

Additional features

If a disc menu screen is displayed

Last Scene Memory

Marker Search

Hearing a different audio

Using the search menu

Using Color (R, G, Y, B) Buttons

Screen Saver

Changing content list view

Displaying Disc Information On-Screen

Enjoying BD-LIVE™ or BONUS VIEW™ in BD-Video

Playing a movie

Notice for displaying the DivX subtitle

Listening to music

Presetting the Radio Stations

Listening to the Radio

Viewing a photo

Options during viewing a photo file in full screen

Reference

Controlling a TV with the Supplied Remote Control

Area Codes

Language Codes

Troubleshooting

Specifications

Open source software notice