JVC TH-BA3 User Manual

Activate wireless pairing

When you use the subwoofer (and wireless receiver unit*) for the first time, activate wireless pairing.

GVT0301-007A[J/C]

0809WMKMDWJMM

ENGLISH

1 Connect the supplied AC adapter to the DC IN

jack on the center unit (and wireless receiver
unit*). Then connect the supplied AC power
cord to the AC adapter, and plug it in to a wall
outlet.

AC adapter AC power cord

To a wall outletTo the center unit (and

wireless receiver unit*)

2 Plug in the power cord of the subwoofer to a

wall outlet.

3 Turn on the System.

Front panel of the center unit

Press.

4 Activate the wireless pairing on the center

unit.

Front panel of the center unit

Press and hold for 4 seconds.

5 While “✽✽” is blinking, activate the wireless

pairing on the subwoofer.

Rear side of the subwoofer

Press using a ball-point pen etc.

“OK” appears on the display of the
center unit.

•

You may need to press the button repeatedly until “OK”
appears on the display.

•

If “✽✽” stops blinking before the wireless pairing is
completed, return to step 4.

Only for TH-BA3:

6 Repeat step 4.

7 While “✽✽” is blinking, activate the wireless

pairing on the wireless receiver unit.

Rear side of the wireless receiver unit

Press using a ball-point pen etc.

“OK” appears on the display of the

“✽✽” blinks on the display.

The POWER ON lamps on the subwoofer and wireless
receiver unit* turns blue.

Now, you can use the subwoofer (and wireless receiver unit*).
Sound comes out through the subwoofer (and surround speakers*) when an audio signal comes in to the center unit.

Wireless pairing is not canceled even if the AC power cords are pulled out from the wall outlet.

•

Only for TH-BA3

*

•

You may need to press the button repeatedly until “OK”
appears on the display.

•

If “✽✽” stops blinking before the wireless pairing is
completed, return to step 6.

center unit.

© 2009 Victor Company of Japan, Limited

EN, FR