(
SR-HD1500
)
●
Dubbing of titles with joined scenes
(Refer to Page 98 on the instruction manual)
When titles imported into the HDD in the HD quality from a video camera, or when
edited titles (e.g., after applying scene delete) are dubbed to a disc, seamless
playback may not be possible at the joints of scenes. In this case, perform dubbing
after executing “SEAMLESS” under the “MODE CHANGE” menu.
●
Creating a seamless BD that uses “MODE CHANGE” (seamless conversion,
recording mode conversion)
Procedures to create a seamless BDMV
Procedures to create a seamless BDAV
●
Mode conversion
(Refer to Page 73 on the instruction manual)
For video titles (recorded in the DR, AVC, AF, AN, AL, or AE recording mode)
imported to the HDD in the HD image quality:
●
You can change the recording mode. (recorded in the DR, AVC, AF, AN, AL, or
AE recording mode
➔
AF/AN/AL/AE/XP/SP/LP/EP)
●
Seamless conversion can be performed to enable smooth playback of joined
scenes after dubbing to a BD. (recorded in the DR recording mode ‡ SEAMLESS)
Memo
●
Re-encoding is performed during recording mode conversion.
●
As seamless conversion does not re-encode video and audio, there is no deterioration in the
image quality.
●
Only titles that are recorded in the DR mode enable conversion to the XP/SP/LP/EP mode.
●
To apply “MODE CHANGE” after turning off the power, select “AFTER POWER OFF” for “START
METHOD” under the “MODE CHANGE”.
Operation procedures:
1. Press [NAVIGATION] on the remote
control
2. Select a title and press [OPTION]
3. Select MODE CHANGE from the
Option menu, and press [OK] to display
the MODE CHANGE screen.
4. Select a recording mode from [MODE],
press [CONFIRM], and press [OK].
If you do not want If you want to
to perform scene perform scene
delete/chapter delete delete/chapter delete
AVCHD
Changing
recording mode
No
MOV*
1
Conversion not Seamless
required conversion
Recording mode Recording mode
SD-VIDEO (HD)*
2
conversion after conversion after
HDV seamless seamless
conversion conversion
*1: SR-HD1500 supports import of files captured in the “SP mode” (1280x720/60p, 30p, 24p,
1440x1080/60i) of the MOV format using the JVC ProHD camcorder GY-HM700 or GY-HM100, and
enables import to the HDD or dubbing to a disc. *2: SD-VIDEO (JVC Everio MPEG-2 TS)
Memo
●
During dubbing to BDMV, the recording mode cannot be specified.
●
Do not perform recording mode conversion before seamless conversion. Otherwise, seamless
conversion cannot be performed.
●
If scene delete or chapter delete is applied to a title, it cannot be dubbed to a BDMV disc
without performing seamless conversion.
●
For titles that are imported into the HDD in the SD picture quality, you can create a seamless DVD by
setting “SEAMLESS PLAYBACK” under the "Setting Menu List" to “ON”, followed by performing reencode dubbing. (Refer to Page 77, "Playback seamless” on the instruction manual)
●
For joints of scenes that are 15 seconds or shorter, seamless playback may fail even when it is
set to “ON”. The same applies during re-encode dubbing in the SD picture quality.
If you do not want If you want to
to perform scene perform scene
delete/chapter delete delete/chapter delete
AVCHD
Conversion not
required
No
MOV*
1
Conversion not Seamless
required conversion
SD-VIDEO (HD)*
2
Seamless Seamless
HDV conversion conversion