JVC SA-DV60E Instructions Manual
LLT0012
SA-DV60U
This instruction manual has been
manufactured from 100% recycled paper.
INSTRUCTIONS
DV INTERFACE BOARD
For Customer Use:
Enter below the Serial No. on the
board in the space below. Retain this
information for future reference.
Model No.
SA-DV60U
Serial No.
DV IN/OUT
VCR CONTROL
This section of instruction manual is specially edited for service
purpose with modified contents.
It is not recommended to use, this section for the substitution of
the original book in the merchandise.
CAUTION
Some of the pages are common to both U and E models,
and some are located on the right section.
Follow the pages indicated (U-**) when reading through.
NOTE
CONTROLS, CONNECTORS
AND INDICATORS
SYSTEM CONFIGURATION,
CONNECTIONS
INSTALLATION SPECIFICATIONS
SWITCH THE SETTINGS
OF THE D9 DEVICE
PRECAUTIONS FOR USE
OF DV INPUT/OUTPUT
LLT0013
SA-DV60E
This instruction manual has been manufactured from 100% recycled paper.
INSTRUCTIONS
BEDIENUNGSANLEITUNG
MANUEL D’INSTRUCTIONS
DV INTERFACE BOARD
DV IN/OUT
VCR CONTROL
This section of instruction manual is specially edited for service
purpose with modified contents.
It is not recommended to use, this section for the substitution of
the original book in the merchandise.
Some of the pages are common to both U and E models,
and some are located on the left section.
Follow the pages indicated (E-**) when reading through.
CAUTION
NOTE
CONTROLS, CONNECTORS
AND INDICATORS
SYSTEM CONFIGURATION,
CONNECTIONS
INSTALLATION SPECIFICATIONS
SWITCH THE SETTINGS
OF THE D9 DEVICE
PRECAUTIONS FOR USE
OF DV INPUT/OUTPUT
E
U
All manuals and user guides at all-guides.com
all-guides.com
(E-2)
Port
DV IN/OUT
VCR CONTROL
Cable
Shielded Twist Pair Cable
Twist Pair Cable
Length
4.5 meters
5 meters
Supplement (SA-DV60E)
This equipment is in conformity with the provisions and protection requirements of the correspond-
ing European Directives, This equipment is designed for professional video appliances and can
be used in the following environments:
• Controlled EMC environment (for example purpose built broadcasting or recording studio), and
the rural outdoors environment (far away from railways, transmitters, overhead power lines, etc.)
In order to keep the best performance and furthermore for electromagnetic compatibility we
recommend to use cables not exceeding the following length:
— MEMO —
All manuals and user guides at all-guides.com
(U-2)
This unit is a DV interface board designed to be installed in the BR-D80U, BR-D85U or BR-
D750U video cassette recorder models or in the BR-D50U, BR-D350U or BR-D51U video
cassette player models to enable the input and output (only output in the case of the player) of
DV signals.
Thank you for purchasing the JVC SA-DV60U DV Interface Board.
SA-DV60U
DV CAMCORDER
DV RECORDER
NONLINEAR EDITOR
DV INTERFACE BOARD
Connection with D-9 recorder
Connection with D-9 player
D-9
IEEE1394
DV(25 Mbps) D-9(50 Mbps)
1
DV D9
..........................................
Linear editing system
2
D9 DV nonlinear editing system
...
Capture, writing back
3
DV D9
..........................................
Dubbing system
Applications:
This unit makes possible the following digital editing/dubbing operations.
Image of DV D-9 Interface
CAUTION
With the D9 devices carrying the following or previous serial numbers, a malfunction
described below is observed when each device is connected to a nonlinear editor.
• With certain nonlinear editors, the time code at the edit-out point may be disturbed as
a result of writing back from the nonlinear editor to the D9 device.
BR-D85U: No. xxxx0508 or before
BR-D80U: No. xxxx0466 or before
(E-3)
This unit is a DV interface board designed to be installed in the BR-D80E, BR-D85E, BR-D85EC
or BR-D750E video cassette recorder models or in the BR-D50E, BR-D50EC, BR-D350E or BR-
D51E video cassette player models to enable the input and output (only output in the case of the
player) of DV signals.
Thank you for purchasing the JVC SA-DV60E DV Interface Board.
SA-DV60E
DV CAMCORDER
DV RECORDER
NONLINEAR EDITOR
DV INTERFACE BOARD
Connection with D-9 recorder
Connection with D-9 player
D-9
IEEE1394
DV(25 Mbps) D-9(50 Mbps)
1
DV D9
..........................................
Linear editing system
2
D9 DV nonlinear editing system
...
Capture, writing back
3
DV D9
..........................................
Dubbing system
Applications:
This unit makes possible the following digital editing/dubbing operations.
Image of DV D-9 Interface
CAUTION
With the D9 devices carrying the following or previous serial numbers, a malfunction
described below is observed when each device is connected to a nonlinear editor.
• With certain nonlinear editors, the time code at the edit-out point may be disturbed as
a result of writing back from the nonlinear editor to the D9 device.
BR-D85E: No. xxxx0673 or before
BR-D85EC: No. xxxx0370 or before
BR-D80E: No. xxxx0362 or before
E
U
All manuals and user guides at all-guides.com
(U-3)
Components
This unit is composed of a circuit board and connector panel.
Circuit board .............. x 1
Connector panel ........ x 1 (with connection wires)
1
[CN302] Connect to the 7-pin plug of the connector
panel.
2
[CN202] Connect to the 6-pin plug of the connector
panel.
3
Ejector Used to eject the board.
Push this part in when inserting the board.
Circuit Board
(DV I/O Board)
Connector Panel
1. Controls, Connectors and Indicators
1
2
3
3
DV I/O
DV IN/OUT
VCR CONTROL
1
2
6-pin plug
7-pin plug
1
DV IN/OUT connector
Input and output of IEEE1394 standard digital signals.
In addition to the digital video and digital audio signals,
this connector can also be used to exchange timecode
signals and control signal input from a DV (i.Link)-
compatible PC.
2
VCR CONTROL (RS-422 interface) connector
Connect to the REMOTE (9-pin) connector on the D9
main body in order to exchange commands between
the D9 and DV devices through the DV I/O board.
During playback of a D9 device, this connector sends
the timecode signal of the D9 device to the DV device
through the DV I/O board.
Accessories
1. RS-422 cable .....x 1 (Both millimeter screws and inch screws are provided in the package.)
2. Ferrite core ......... x 1 (To be attached when using headphones)
☞
See page 8
(E-10)
(E-4)
(E-5)
2. System Configuration, Connections
System Configuration and Connection Examples for different Applications
A system for digital editing and/or dubbing can be configured and connected by referring to the
following examples according to the available units and the required function.
䡵 Operate the connected units correctly by referring to their instruction manuals.
䡵 Cables for connection between units are not provided.
Please purchase the applicable connector cables as required.
䡵 DV connection target models
GY-DV500E *
1,
*
3
GY-DV550E
GY-DV700WE *
1
BR-DV600E *
3
BR-DV600EA
DV nonlinear editor *
2
*1. The GY-DV500E and GY-DV700WE models are not capable of DV input recording through
the DV input. Refer to their instruction manuals for details.
*2. For the DV nonlinear editors, please consult your nearest JVC dealer.
*3. Precautions for connection of the GY-DV500E or BR-DV600E
(1) Time codes cannot be dubbed.
(2) When the DV device is switched from the Still mode to the Play mode, audio may be
interrupted momentarily. This is not a malfunction.
(3) Sets having serial numbers other than those shown below cannot be connected to this
unit. For information concerning their upgrade versions, please consult your local JVC-
authorized service agent.
Model Name Last 5 digits of S/No.
GY-DV500E xxx14590 and after
xxx54590 and after
xxx30401 and after
GY-DV500EC xxx10281 and after
xxx50281 and after
Model Name Last 5 digits of S/No.
GY-DV500ECK xxx30251 and after
BR-DV600E xxx11535 and after
xxx51535 and after
BR-DV600EC xxx10001 and after
xxx50001 and after
E
All manuals and user guides at all-guides.com
Loading...