Enter below the Model No. and Serial No.
which are located on the rear, bottom or
side of the cabinet. Retain this
information for future reference.
Model No.
Serial No.
LVT1265-001A
[J]
Warnings, Cautions and Others
Mises en garde, précautions et indications diverses
For U.S.A.
This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to part 15 of the
FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However, there is no
The lightning flash with arrowhead symbol,
within an equilateral triangle is intended to
alert the user to the presence of uninsulated
“dangerous voltage” within the product’s
enclosure that may be of sufficient magnitude
to constitute a risk of electric shock to persons.
The exclamation point within an equilateral
triangle is intended to alert the user to the
presence of important operating and
maintenance (servicing) instructions in the
literature accompanying the appliance.
guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following
measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for
help.
CAUTION—ON/STANDBY button!
Disconnect the mains plug to shut the power off completely. The
ON/STANDBY button in any position does not disconnect the
mains line. The power can be remote controlled.
ATTENTION
Déconnectez la fiche secteur pour mettre l’appareil complètement
hors tension. La toucheON/STANDBY dans n’importe quelle
position ne déconnecte pas l’appareil du secteur. L’alimentation ne
peut pas être commandée à distance.
CAUTION
To reduce the risk of electrical shocks, fire, etc.:
1. Do not remove screws, covers or cabinet.
2. Do not expose this appliance to rain or moisture.
ATTENTION
Afin d’éviter tout risque d’électrocution, d’incendie, etc.:
1. Ne pas enlever les vis ni les panneaux et ne pas ouvrir le coffret
de l’appareil.
2. Ne pas exposer l’appareil à la pluie ni à l’humidité.
—ToucheON/STANDBY!
For Canada/pour le Canada
CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH
WIDE BLADE OF PLUG TO WIDE SLOT, FULLY
INSERT.
ATTENTION: POUR EVITER LES CHOCS
ELECTRIQUES, INTRODUIRE LA LAME LA PLUS
LARGE DE LA FICHE DANS LA BORNE
CORRESPONDANTE DE LA PRISE ET POUSSER
JUSQUAU FOND.
For Canada/pour le Canada
THIS DIGITAL APPARATUS DOES NOT EXCEED THE
CLASS B LIMITS FOR RADIO NOISE EMISSIONS
FROM DIGITAL APPARATUS AS SET OUT IN THE
INTERFERENCE-CAUSING EQUIPMENT STANDARD
ENTITLED “DIGITAL APPARATUS,” ICES-003 OF THE
DEPARTMENT OF COMMUNICATIONS.
CET APPAREIL NUMERIQUE RESPECTE LES
LIMITES DE BRUITS RADIOELECTRIQUES
APPLICABLES AUX APPAREILS NUMERIQUES DE
CLASSE B PRESCRITES DANS LA NORME SUR LE
MATERIEL BROUILLEUR: “APPAREILS
NUMERIQUES”, NMB-003 EDICTEE PAR LE
MINISTRE DES COMMUNICATIONS.
G-1
IMPORTANT FOR LASER PRODUCTS
1. CLASS 1 LASER PRODUCT
2. CAUTION: Do not open the top cover. There are no user
serviceable parts inside the unit; leave all servicing to qualified
service personnel.
3. CAUTION: Visible and invisible laser radiation when open and
interlock failed or defeated. Avoid direct exposure to beam.
4. REPRODUCTION OF LABEL: CAUTION LABEL, PLACED
INSIDE THE UNIT.
IMPORTANT POUR PRODUITS LASER
1. PRODUIT LASER CLASSE 1
2. ATTENTION: N’ouvrez pas le couvercle supérieur. Il n’y a
aucune pièce réparable par l’utilisateur à l’intérieur de l’appareil;
confiez toute réparation à un personnel qualifié.
3. ATTENTION: Risque de radiations laser visible et invisible
quand l’appareil est ouvert et que le système de verrouillage ne
fonctionne pas ou a été mis hors service. Évitez toute exposition
directe au rayon.
4. REPRODUCTION DE L’ÉTIQUETTE: ÉTIQUETTE DE
PRÉCAUTION PLACÉE À L’INTERIEUR DE L’APPAREIL.
CAUTION:
• Do not block the ventilation openings or holes.
(If the ventilation openings or holes are blocked by a
newspaper or cloth, etc., the heat may not be able to get out.)
• Do not place any naked flame sources, such as lighted
candles, on the apparatus.
• When discarding batteries, environmental problems must be
considered and local rules or laws governing the disposal of
these batteries must be followed strictly.
• Do not expose this apparatus to rain, moisture, dripping or
splashing and that no objects filled with liquids, such as vases,
shall be placed on the apparatus.
ATTENTION:
• Ne bloquez pas les orifices ou les trous de ventilation. (Si les
orifices ou les trous de ventilation sont bloqués par un journal
un tissu, etc., la chaleur peut ne pas être évacuée
correctement de l’appareil.)
• Ne placez aucune source de flamme nue, telle qu’une bougie,
sur l’appareil.
• Lors de la mise au rebut des piles, veuillez prendre en
considération les problèmes de l’environnement et suivre
strictement les règles et les lois locales sur la mise au rebut
des piles.
• N’exposez pas cet appareil à la pluie, à l’humidité, à un
égouttement ou à des éclaboussures et ne placez pas des
objets remplis de liquide, tels qu’un vase, sur l’appareil.
G-2
Thank you for purchasing the JVC Powered Woofer CD System.
Before operating this system, read this manual carefully and thoroughly to obtain the best possible performance from your system, and retain
this manual for future reference.
Features
Here are some of the things that make your system both powerful and simple to use.
■ General
• With JVC’s COMPU PLAY you can turn on the system and automatically start the radio, disc player,
or cassette deck with a single touch. (Only when AC power is used.)
• Shoulder strap and carrying handle
• ACS (Active Clear Sound) circuit for enhanced sound reproduction
• Super woofer volume control that provides powerful bass
• Sound mode control—reproducing various sound fields
• Remote control unit that operates the disc, cassette, and tuner functions
• Locking mechanism for disc and cassette door
• Microphone/guitar input
■ Disc playback mode includes Skip Play, Search Play, Repeat Play, Random Play, and Program Play.
■ Cassette player having full logic cassette mechanism, auto reverse, and auto tape mechanism.
■ A 45-station preset capability (30 FM and 15 AM) in addition to auto-seek and manual tuning.
■ Clock/timer functions, timer on/off with preset volume function, and sleep timer.
IMPORTANT CAUTIONS
1. Where to place the system
■
• Select a place which is level, dry and neither too hot nor too cold (between 5°C and 35°C or 41°F and 95°F).
• Leave sufficient distance between the system and a TV.
• Do not use the system in a place subject to vibrations.
2. Power cord
■
• Do not handle the power cord with wet hands!
• Some power is always consumed as long as the power cord is connected to the wall outlet.
• When unplugging the system from the wall outlet, always pull the plug, not the power cord.
3. When carrying the system
■
• Remove a disc from the system.
• Disconnect all the cords from the system.
4. Malfunctions, etc.
■
• There are no user serviceable parts inside. In case of system failure, unplug the power cord and consult your dealer.
• Do not insert any metallic object into the system.
9 ON/STANDBY button (7, 17 – 18)
p DISPLAY button (8)
q CANCEL button (12, 18)
w SET button (10, 17 – 18)
e CLOCK/TIMER button (17 – 18)
r FM MODE button (9)
t REVERSE MODE button (13)
y VOLUME +/– buttons (7)
u SUPER WOOFER VOLUME +/– buttons (8)
RM-SRVNB1A REMOTE CONTROL
COMPU PLAY — One Touch Operation
With One Touch Operation you can play a disc, a tape, or turn on the radio with a single press of the play button for that function. The system
turns on and starts playing the source if it is ready.
The COMPU PLAY buttons are: On the system and remote control
CD 6 button
TA PE 2 3 button
TUNER BAND button
AUX button
Note: The COMPU PLAY feature is not effective when the system is operated on batteries or car battery (DC12V).
3
■■
Getting started
Accessories
Check that you have all the following items, which are supplied with the system.
Power cord (1)
Remote control (1)
Shoulder strap (1)
If any of these items are missing, contact your dealer immediately.
Carrying the system
Using the carrying handles
■
Be sure to hold both handles when you carry the system.
If you carry the system by only one handle, because of the length
of the system, the end may drag on the ground and be damaged as a
result.
Do not lift the system by the woofer ducts, and do not insert any
metallic objects into them.
Carrying handle
Woofer duct
Using the shoulder strap
■
Attach the supplied shoulder strap (adjustable in length) to each
end of the system as illustrated.
1
To detach the shoulder strap, press in the metal fitting and unhook
it from the shaft.
Using the remote control — RM-SRVNB1A
Installing the batteries
■
1
Match the polarity (+ and –) on the batteries with the +
2
and – markings in the battery compartment.
CAUTION:
To avoid battery leakage or explosion:
• Remove batteries when the remote control is not in use for an
extended period of time.
• When you need to replace the batteries, replace both batteries at
the same time with new ones.
• Do not use different types of batteries together.
Point the remote control at the remote sensor on the system’s
control panel (from a distance of up to 7 m (23 feet)). If you point
the remote control from the slant direction, the distance will be
shortened.
• Do not expose the remote sensor to strong direct sunlight or
artificial lighting.
• Make sure there are no obstacles between the remote sensor and
the remote control.
Shoulder strap
2
Remote sensor
Remote control
Shoulder strap
Remote control
case
R6(SUM-3)/AA(15F) (not supplied)
3
4
Connections
CAUTION: Make all connection before plugging the system into an AC power outlet.
■ Connecting the auxiliary equipment
Auxiliary
equipment
■ Connecting the microphone/guitar
(not supplied)
■ Connecting to the car battery
Pin-plug x 2
Stereo mini plug
Signal cord
(not supplied)
(not supplied)
■ Memory backup batteries
2
To car’s cigarette
lighter socket (DC12V)
Car adapter JVC model
CA-R120 (not supplied)
1
CAUTION:
• Be sure to use the specified car adapter (JVC model CA-R120) to prevent
mishaps or damage resulting from different polarity design.
• For safety, stop the car before performing operations.
• Be sure to start the engine when you use the car adapter; otherwise, the car
battery will be exhausted.
• During transport, stabilize the system in a box, etc.
• To prevent malfunctions, do not leave the system in a car for a long time.
• If the power is supplied through the car battery, the display will be blank
with the system turned off (at standby).
Unplug the AC power cord from the system to supply the power
through the car battery; otherwise, the system does not work.
■ Connecting the AC power cord
Power cord
CAUTIONS:
• ONLY USE THE JVC POWER CORD PROVIDED WITH
THIS SYSTEM TO AVOID MALFUNCTION OR
DAMAGE TO THE SYSTEM.
• BE SURE TO UNPLUG THE POWER CORD FROM THE
OUTLET WHEN GOING OUT OR WHEN THE SYSTEM
IS NOT IN USE FOR AN EXTENDED PERIOD OF TIME.
1
Battery cover
Match the polarity (+ and –) on the batteries
with the + and – markings in the battery