Jvc LT-43MA875 User Manual

4K UHD HDR Smart TV

LT-43MA875

(43" class/ 42 .5 diagonal)"

INSTRUCTIONS

ATTENTI ON

If yo u pu rc ha se a u niver sa l re mo te c ontro l fr om y ou r lo cal r et ailer, please contact the remote manufacturer for the
required programming code.

ENGLISH

PLEAS E HAV E THE M OD EL NU MB ER R EA DY PR IO R TO CA LL IN G

FOR R EC YC LI NG I NF ORM ATI ON , PLEAS E CO NTA CT CU ST OMER SE RV IC E.

CUSTO ME R SE RVI CE - 1 -8 88 -582-8870

Before operating the unit, please read this manual thoroughly.

Contents

Safety and warnings................................................................................................ 2-3

Warnings and Cautions.............................................................................................4

Introduction............................................................................................................ 5-6

Installation..............................................................................................................7-9

Remo te Cont rol .......................................................................................................10

Operation................................................................................................................11-23

Trouble Shooting.....................................................................................................24

IMPORTANT SAFETY INSTRUCTION

1) Read these instructions.

2) Keep these instructions.

3) Heed all warnings.

4) Follow all instructions.

5) Do not use this apparatus near water.

6) Cle an o nly wit h dr y cloth .

7) Do not block any ventilation openings,
install in accordance with the instructions.

8) Do no t in stall n ea r any hea t so urces s uch as
radiations, heat registers, stoves, or other
apparatus (including amplifiers) that produce
heat.

9) Do no t de feat th e sa fety pu rp ose of th e
polarized plug. If the provided plug does not fit
into your outlet, consult an electrician for
replacement of the obsolete outlet.

10) Protected the power cord from being
walked on or pinched particularly at plugs,
convenience receptacles, and the point where
they exit from the apparatus.

11) Only use attachments/accessories
specified by the manufacturer.

12) Unplug this apparatus during lighting
storms or when unused for long periods of
time.

13) Refer all servicing to qualified service
personnel. Servicing is required when the
apparatus has been damaged in any way, such
as power-supply cord or plug is damaged,
liquid has been spilled or objects have fallen
into the apparatus, the apparatus has been
expo se d to rain o r mo istur e, d oes not o perat e
normally, or has been dropped.

14) Ma in s plug is u se d as the di sc onnec t
device, the disconnect device shall remain
readily operable.

15) The ventilation should not be impeded by
covering the ventilation openings with items,
such as newspapers, table-cloth, curtains, etc.

16) No n ak ed flam e so urces , su ch as lig hted
candles, should be placed on the apparatus.

17) Attention should be drawn to the
environmental aspects of battery disposal.

18) The use of apparatus in moderate climate.

19) The apparatus shall not be exposed to
dripping or splashing and that no objects filled
with liquids, such as vases, shall be placed on
the apparatus.

Warning: To avoid any injury caused by lean of
the product, please always ensure the whole
product was placed within the table surface in
horizontal.

SA FET Y AND WAR N IN G S

WARNING
Neve r pl ac e a te le vision se t in a n un st able
location. A television set may fall, causing serious
personal injury or death. Many injuries,
particularly to children, can be avoided by taking
simple
precautions such as:
– Using cabinets or stands recommended by the
manu fa ct ur er o f the telev is io n se t.
– Only using furniture that can safely support the
television set.
– Ensuring the television set is not overhanging
the edge of the supporting furniture.
– Not placing the television set on tall furniture
(for example, cupboards or bookcases) without
anchoring both the furniture and the television set
to a sui table support.
– Not placing the television set on cloth or other
mate ri al s th at m ay be locat ed b et we en the
television set and supporting furniture.
– Educating children about the dangers of
clim bi ng o n fu rn iture to re ac h th e te levisio n se t or
its controls.
If your existing television set is being retained and
relocated, the same considerations as above
should be applied.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN!

TO REDUCE THE RISK OF ELECTRIC SHOCK, DO
NOT REMOVE COVER (OR BACK).NO USER
SERVICEABLE PARTS INSIDE. REFER SERVICING
TO QUALIFIED SERVICE PERSONNEL.

The symbol indicates that dangerous
voltages constituting a risk of electric
shock are present within this unit.

The symbol indicates that there are
important operating and maintenance
instructions in the literaturaccompanying
this unit.

WARNING:

To reduc e the ris k of fi re or ele ctric
shoc k, do not e xpo se this a ppara tus t o
rain or moisture.

WARNING:

The ba tteri es sh all not b e expos ed to
excessive heat such as sunshine, fire or
the like.

CAUTION

-2-

This symbol indicates that this product
incorporates double insulation between
hazardous mains voltage and user
accessible parts. When servicing use only
identical replacement parts.

This marking indicates that this product
should not be disposed with other
household wastes throughout the EU. To
prevent possible harm to the environment
or human health from uncontrolled waste
disposal, recycle it responsibly to promote
the sustainable reuse of material
reso urces . To return y our use d devic e,
please use the return and collection
syst ems or co nta ct the re taile r where t he
product was purchased. They can take this
product for environmental safe recycling.

Step one: Use the expansion
bolts(4*36PWA) to fix the wall mount
brackets into the wall

SA FET Y AND WAR N IN G S

War ni ng : Changes or modifications to this unit not
expressly approved by the party responsible for
compliance could void the user’s authority to operate
the equipment.

NOTE: This equipment has been tested and found to
comply with the limits for a C la ss B d igital de vi ce ,
purs ua nt t o Pa rt 1 5 of the FCC Ru le s. Th es e limits ar e
designed to provide reasonable protection against
harm fu l in te rf erence in a r es id en tial inst allation. This
equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications.
Howe ve r, th er e is n o guarantee that interference will
not oc cu r in a p ar ti cular ins ta llation. If t hi s equipment
does cause harmful interference to radio or television
rece pt io n, w hi ch can be det er mi ne d by turnin g th e
equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following
measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and
receiver.

- Connect the equipment into an outlet on a cir cu it
different from that to which the receiver is connected.

-Consult the dealer or an experienced radio/TV
technician for help.

This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) th is d ev ic e ma y not cause h ar mf ul i nterferen ce ,
and(2) this device must accept any interference
rece iv ed , in cluding interference that may cause
undesired operation.

Step Two: F ix th e wall mo unt scr ews
(M6x 8mm/4 pcs ) into th e rear si de of the L CD
TV,using the tongue
of 8kgf.cm.
* The TV appearance subject to material
object.

Step Thr ee: P ut t he LC D TV w ith wal l mount
scre ws onto t he wa ll moun t brack ets .
Warning: the angle between the TV and wall
must not be bigger than 3º.

-3-

Warning
High voltages are used in the operation
of this television receiver. Do not remove
the cabinet back from your set. Refer
servicing to qualified service personnel.

WARNINGS AND CAUTIONS

Caution
Do not trap the power supply cord under
the television receiver.

Warning

To prevent fire or electrical shock
hazard, do not expose the television
receiver to rain or moisture.

Warning

Do not drop or push objects into the

television cabinet slots or openings.

Never spill any kind of liquid on the

television receiver.

Caution

Do not block the ventilation holes in the

back cover. Adequate ventilation is

essential to prevent failure of electrical

components.

Caution
Never stand on, lean on, or suddenly push
the television or its stand. You should pay
special attention to children. Serious injury
may result if it should fall.

Caution
Do not place your television on an unstable
cart, stand, shelf or table. Serious injury to
an individual , and damage to the
television, may result if it should fall.

Caut ion
When the television receiver is not
used for an extended period of time, it
is advisable to disconnect the AC power
cord f rom the AC o utl et.

Dim:515*320mm(不包括底座）

-4-

INTRODUCTION

Introduction

Congratulations on your purchase of a h igh-quality
JVC product. Your

55MA875, or LT-65MA875

the art in LED TV design and is designed for reliable
and trouble-free performance.

Google Chromecast built-in

UNLIMITED ENTE RTAI NMENT, ALL ON YOUR
SCHEDULE

• With Google Chromecast™ built-in, you are in
command. Access more than 200,000 TV shows
and movies, millions of songs and more through
apps like Netflix, YouTube, and Google Play.
Discover new content, with more apps being
added all the time at g.co/castapps.

USE YOUR PHONE AS A REMOTE

• By using your phone, there's nothing new to
learn—cast your apps, your playlists, your TV
shows—without new log-ins or downloads. It's
simple to search, browse, queue, and control from
anywhere in the home.

MULTI-TASK WITHOUT INTERRUPTING WHAT’S
PLAYING

• Whil e yo u ar e ca st ing, you ca n ke ep u si ng your
phone for other things without disrupting what is
play in g on t he T V.

LT-43MA875, LT-49MA875, LT-

repr es en ts t he s tate of

TM

®

HDMI CEC Control

Enjoy the benefit of having HDMI CEC-compatible
prod uc ts p lu g an d play! No se tu p is n ee ded! CEC
technology lets different devices discover and
communicate with each other.

DTS St ud io S ou nd

DTS St ud io S ou nd i s an advanc ed s ur ro und sound
solution suite that accurately extracts and places
audio cues for an immersive surround experience
over the TV’s built-in speakers. To complete the audio
experience, post processing and psychoacoustic
techniques are implemented to provide 3D audio
rend er in g to m at ch 3D video c on te nt , for bass an d
dialog enhancement and to deliver consistent and
level volume across content.

®

4K ULTRA HD CO NN ET ED

Four times the pixel resolution of the 1080full HD.
4K Ult ra H D TVs wi th a t le as t 8 million a ct iv e pi xe ls.
Our televisions that resolution has standardized to
3,840 by 2,160.

HDR

Expanding the TV's contrast ratio and color palette
to offer a more realistic, natural image than what's
possible with today's HDTVs. Support HDR video,
HDR Cr ea te s a wider gamut of colors, allowing for a
more vivid display. HDR for TVs aims to show you a
more r ea li st ic i mage, one w it h mo re c ontrast ,
brightness and color than before.

Audio accessibility

Your TV provides audio descriptions of menus and
some remote control functions. Depending on the
broadcaster, audi o na rr at io n of key elem en ts i n
programs may also be available.

-5-

!Thank you very much for purchasing this TV. To enjoy

your product from the very
beginning, read this manual carefully and keep it handy for
easy reference.

CAUTION

Never tamper with any components inside the TV, or any
other adjustment controls not mentioned in this manual.
All LED-TVs are high voltage instruments. When you
clean up dust or water drops on the LED PANEL or
CABINET, the power cord should be pulled out from the
receptacle, then wipe the TV with a dry soft cloth.
During thunder and lighting, unplug the power cord and
antenna cord to prevent damage to your TV. All repairs
to this TV should only be performed by qualified TV
service personnel.

Main features

■ Integrated ATSC TV tuner for HDTV broadcast reception

■ High brightness provides a vivid and brilliant picture

■ Deeper blacks and brighter whites with high contrast

■ Wide Scre en aspe ct rat io ( 16 :9 ) fo r a co mp le te ho me

thea te r e xp er ience

■ HDMI input for true digital connection

■ Built-in stereo speaker system

■ Full-function Remote Control

Main Specifications

INTRODUCTION

INSTALLATION

*Locate the TV in the room where light does not strike the
screen directly.
*Total darkness or a reflection on the picture screen can
cause eyestrain. Soft and indirect lighting is recommended
for comfortable viewing.
*Allow enough space between the TV and the wall to permit
ventilation.
*Avoid excessively warm locations to prevent possible
damage to the cabinet or premature component failure.
*Do not cover the ventilation openings when using theTV.

Accessories

Power cable...................................

Infrared Remote Control....................

User’sM anual ................................

Battery(AAA)....................................

1

1

1

2

Viewing Picture Size (diagonal)

Resolution:

Power supply

Power consumption

Audio Output Power (THD 7%):

Aspect Ratio:

TV System:

Video Signal System:

Receiving Channel:

High-Definition Multimedia Interface (HDMI) Input

Composite Video Input

Optical Output

LAN

Headphone Output

USB Input

43"

3840 x 2160

AC 100-240V 50/60Hz

70W

2x8W

16:9

ATSC Digital system and NTSC Analog system

NTSC

Cable :1-135/ Air: 2-69 (ATV&DTV)

x

3

x 1

x 1

x 1

x 1

x1

Horizontal definition (TV line) Composite Video Input >=350

Video Input >=400

Component (YPbPr) >=400

-6-

INSTALLATION

Front panel

KEYBOARD

The keyboard is located at the bottom left near the right

side of signal indicator.

Remote Buttons

3
2

1

Bottom

“ ” VOL- and m ov e le ft

“ ” VOL+ and m ov e right

“ ” CH- an d mo ve d ow n
“ ” CH+ an d mo ve u p

“ Cent er b ut to n ” po wer key and s ou rc e ke y, ho ld i t fo r a
long time, the TV will power down.

1: Rem ot e co nt ro l sensor.

2: Indicator LED: RED STAN DBY.

3: Key b oa rd

REAR Connections

LAN

VIDEO

LR

All the terminals are (from left to right):

LAN, VIDEO ,RF.

SIDE Connections

HEADPHONE OPTICAL HDMI3 HDMI2 HDMI1 USB

All the terminals are (from left to right):

HEADPHONE, OPTICAL, HDMI3, HDMI2, HDMI1, USB.

-7-

RF

ANTENNA

Note:
Aerial connections: (female).
Input impendance: 75 u nb alanced.

F

INSTALLATION

PRESET MODE (HDMI)

1

2

3

4

5

6

7

RESOLUTION

800*600

1024*768

1360*768

1280*768

1920*1080

3840*2160

3840*2160

V.Freq.(Hz) H.Freq.(KHz)

60

60

60

60

60

30

60

37.88

48.36

47.7

47.3

67.5

67.5

135

-8-

AV EQUIPMENT

You can use the input terminals as follows.rear

HEADPHONE OPTICAL HDMI3 HDMI2 HDMI1 USB

Y

Yellow (video)

R

Red (audio R)

W

White(audio L)

R

Red(Pr or Cr)

B

Blue(Pb or Cb)

G

Green(Y)

AMPLIFIER

INSTALLATION

LAN

The television's inputs can be connected to the following types of eq uipment : VC R, m ul ti d isc pla ye r,

DVD, c am co rd er, v ideo game o r st er eo system, etc.....

YPbPr can support these video formats:480i,576i,480p,576p,720p,1080i, 1080p.

VIDEO

LR

RF

-9-

REMOTE CONTROL

REMOTE CONTROL

Butt on P re ss t o. ..

1. (po we r) Tu rn y ou r TV o n or o ff ( st andby mode).
When your TV is off the power indicator lights red.
Warning: When your TV is off, power still flows
through it. To disconnect power, unplug the power
cord.

2. Swi tc h to C hromecast built-in.

3.VO L +/- To adjust sound level.

4. OK Co nf ir m selections or changes in TV menus.

5. (play/pause) Star t or s to p playback.

6. (back ) Re tu rn t o the previous level or channel.

7. (INPU T) O pe n th e Input Selection list. Press
INPU T one or mor e ti me s or p ress S or T to s elect the
video input source, then press OK. See Selecting the
vide o in pu t so ur ce .

8. (MUTE ) To disab le o r en ab le the sound output

9. MEN U Op en t he o n- screen menu..

-10-

Turn ing on your T V fo r th e fi rs t time

The fi rs t ti me y ou t urn on your TV, the i ni ti al setup
wizard opens. The wizard guides you through setting
up your TV
including the Chromecast built-in setup, menu
language, time zone, TV signal source, and the
channel list.
If you are using an Android mobile device, go to
Using an Android mobile device.
If you are using an iOS (Apple) mobile device, go to
Using an iOS (Apple) mobile device.

Usin g an An dr oid mobil e de vi ce

1 Make s ur e th at y ou :

-Tu rn o ff t he s ma rt n etwork sw it ch o pt io n (if your
device has this option). On your phone, go to the Wi­Fi men u in t he s et ti ngs app.

- Connect the c orrect de vi ce t o wa tch standard
broadcast TV channels using a c able box, satellite
box, or external antenna.

-Kno w th e Wi fi n et work name a nd p as sw ord if you
are us in g a wi reless network to set up your TV.

Note

1.If y ou w an t to u se a w ired connection instead of Wifi
to set u p yo ur TV, con ne ct your TV to an Inte rn et
router using the LAN jack.
With a w ir ed c onnection, you cannot connect to
Chromecast built-in with an LTE or 3G network.

2. Press (power) to turn on your TV. The Set me up
screen opens.

OPERATION

5. Tap INSTALL. The app installs.

6. Tap OPEN.

7. Tap ACC EPT to a gree to the Terms of Serv ic e an d
Privacy Policy.

Note

If you have not turned on Wi-Fi on your device, a
mess ag e te ll s yo u to turn on Wi -F i.

8. Tap TU RN O N LO CATIO N.

9. Tap ALLOW. Your mobile d evice searches for Cast
TVs in range.

10. Tap CONTINUE a ft er y ou r device fi nd s yo ur C as t
TV.

3. Type google.com/cast/setup in the search bar of
your device's browser.

4. Tap GE T IT O N Go og le P la y.

11. Ma ke sure tha t th e codes on your device and TV
match, then on your mobile device, tap I S EE THE
CODE.

-11-

OPERATION

12. Op tional: To change the name of your TV to
something distinct, delete the current name, type in a
new on e, t he n ta p CO NTINUE.

13. Choose your Wifi network, enter the Wifi
pass wo rd ( if n ec essary) , th en t ap C ON TINUE. Your
TV connects to the network and is ready to cast.

Note

If your TV receives an update, wait f or the update to
finish.

14. Si gn i n to y ou r Go ogle acco un t to p ersonalize
your casting experienceORTap LEAVE SETUP to
start casting right away.

15. Tap the slider to turn email notifications on or off,
then t ap C ON TI NU E.

16. Tap LEARN HOW TO CA ST t o go t hr ough a
tutorial.ORTap SKIP to skip the tutorial.

17. Tap (Manage yo ur d ev ic es) to set up , ma nage,
and co nt ro l th e de vices on yo ur n et wo rk.

Afte r se tt in g up C hromeca st b ui lt -i n, your TV's
menu language, time zone, and daylight savings
time settings should be set automatically to match
the settings on your mobile device.
If the settings are not correct or you want to change
the settings, see:
Setting the time zone and Daylight Saving Time
status.
Selecting the menu language .
If you c on ne ct ed c able TV without a b ox o r an
exte rn al a nt en na to the ANT / CABLE IN j ac k, s et
up the AN T / CABLE IN j ac k an d sc an for channels.
See:
Sett in g up t he AN T / CA BL E IN j ack
Auto ma ti ca ll y scanning for channels .

-12-

Usin g an i OS ( Ap pl e) mobile d ev ic e

1 Make s ur e th at y ou :
Turn off the smar t ne tw or k switch op ti on ( ca ll ed Wi-Fi
Assist) under Settings > C ellular.
Install the remote control batteries and connect the
power cord .
Connect the cor re ct d ev ic e to watch st andard
broadcast TV channels using a c ab le b ox, satel li te
box, or external antenna.
Know the Wifi network name and password if you are
usin g a wi reless network to set up your TV.
Connect the cor re ct d ev ic e to watch st andard
broadcast TV channels using a c able box, satellite
box, or external antenna.
Know the Wi-Fi network name and password if you
are us in g a wi reless network to set up your TV.

Note

1.If y ou w an t to u se a w ired connection instead of Wifi
to set u p yo ur TV, con ne ct your TV to an Inte rn et
rout er u si ng t he L AN jack. Fo r mo re i nf ormatio n, s ee
Connecting a netw or k ro ut er .
With a w ir ed c onnection, you cannot connect to
Chromecast built-in with an LTE or 3G network.

2. Turn o n Wi fi o n yo ur m obile dev ic e an d co nnect it
to you r ho me W if i ne twork.

3. Turn on Bluetooth on your mobile device.

4. Pre ss ( power) to turn on your TV. The Set me up
screen opens.

OPERATION

7. Tap GE T.

8. Tap OP EN.

9. Tap ACC EPT to a gree to the Terms of Serv ic e an d
Privacy Policy. Your mobile device searches for Cast
TVs in r an ge .

Note

If you have not turned on Wi-Fi on your device, a
mess ag e te ll s yo u to turn on Wi -F i.

10. Tap CONTINUE a ft er y ou r device fi nd s yo ur C as t
TV.

5. Type google.com/cast/setup in the search bar of
your device's browser.

6. Tap Download on the App Store.

-13-

11. Ma ke sure tha t th e co de s on your dev ic e an d TV
match, then on your mobile device, tap I S EE THE
CODE.

12. Select your region, then tap CONTINUE.

OPERATION

14. Choose your Wifi network, enter the Wifi
pass wo rd ( if n ec essary) , th en t ap C ON TINUE. Your
TV connects to the network and is ready to cast.

Note

If your TV receives an update, wait f or the upda te t o
finish.

13. Op tional: To change the name of your TV to
something distinct, delete the current name, type in a
new on e, t he n ta p CO NTINUE.

-14-

15. Si gn i n to y ou r Google account to personalize
your casting experience.
OR Tap LEAVE S ET UP to st art casting r ig ht a wa y.

16. Tap the slider to turn email notifications on or off,
then t ap C ON TI NU E.

17. Tap LEARN HOW TO CA ST t o go t hr ough a
tutorial. OR Tap SKIP to skip the tutorial.

18. Tap (Manage your devices) to set up, manage,
and control the devices on your network.

After setting up Chromecast built-in, your TV's
menu language, time zone, and daylight savings
time settings should be set automatically to match
the settings on your mobile device.
If the s et ti ng s ar e not corre ct o r yo u wa nt t o change
the settings, see:
Setting the time zone and Daylight Saving Time
status .
Selecting the menu language.
If you connected cable TV without a box or an
exte rn al a nt en na to the ANT / CABLE IN j ac k, s et u p
the ANT / CABLE IN
jack and scan for channels. See:
Sett in g up t he AN T / CA BL E IN j ack
Automatically scanning for channels.

Casting a vide o, m ov ie , or T V show

Afte r yo u se t up C hr omecast b ui lt -i n on your TV a nd
mobile device, you are ready to cast videos, movies
and TV shows.

1. On yo ur m obile device, make sure that Wifi is
turned on.

2. Ope n a Ch ro me ca st-enabled app.

3. Tap the video, movie, or TV program you want to
cast , th en t ap

4. Tap th e device yo u wa nt t o ca st to.

5. To sto p casting , ta p

OPERATION

Sett in g up t he ANT / CABLE I N jack

If you connect an antenna or cable TV without a bo x to
the ANT / CABLE IN ja ck , yo u ne ed to set up th e ja ck
so your TV correctly displays channels.

1. Pre ss M EN U, p re ss S or T to highlight
Installation, then press OK.

< Ins tallation

Accessibility

Picture

Sound

Options

Installation

timers

Get H elp

2. Hig hl ig ht C ha nnel Tuning, then press OK.

Accessibility

Picture

Sound

Options

Installation

timers

Get H elp

3. Highlight ANT/CABLE In, then press OK.

4. Highlight your TV input source, then press OK.
Select:
Ante nn a if y ou c onnected an antenna to the
ANT / CABLE IN jac k
Cable if you connected cable TV without a box to t he
ANT / CABLE IN jac k

5. Press EXIT to close the menu.

Understanding the basics

This s ec ti on c ov ers basic i nf or ma tion for:

-Tu rn in g your TV on o r off

-Selecting the video input source

- On-s cr ee n me nu o verview

-Navigating the menus

- Adjus ti ng t he v ol ume

-Sel ec ti ng a c hannel

-Viewing channel information

-15-

Men u Langu age English

Hom e / Retai l Mode Ho me

Tim e Zon e Easte rn

Day light s Savin g Tim e Off

Cha nnel Tun ing

Quick Setup

Reset TV

< Cha nnel Tun ing

ANT/CABLE In A ntenn a

Aoto Tuning

Manual Tuning

Channel List

Antenna

Cable

OPERATION

Turn ing your TV o n or o ff

1. Mak e su re t ha t th e power cor d is c onnected
secu re ly a nd c or rectly. For more i nf or ma ti on, see
Connecting power .

2. Pre ss ( power) to turn on your TV. The power
indicator turns off.

3. Pre ss ( power) to turn off your TV. Your TV enters
standby mode, and the power indicator turns red.

Warning

When y ou r TV is in s ta nd by m ode, it is stil l re ce iv ing
power. To completely disconnect power, u nplug the
power cord.

Note

If your TV does not receive an input signal for 15
minutes, it automatically goes into standby mode.

Last Mode Memory

If power is interrupted while you are viewing TV, the
Last Mode Memory feature automatically turns on
your TV when the power is restored.

Sele ct in g th e vi deo input s ou rc e

1. Pre ss “ IN PU T” T he I nput Selection list opens.

2. Do on e of t he f ollowing:

-Press INPUT one or more times until the video input
you want is selected.

-Press S or T to highlight the video input you want,
then p re ss O K.

NOTE

If you have not scanned for channels, Google
Chromecast appears at the top of the Input Selection
list.

3 Pres s “EXIT” to close the menu.

Notes

-If a CEC-c om pa ti ble devic e is c onnected to an HDMI
jack, the HDMI® CEC icon appears in the list.

-If a conne ct ed C EC -compat ib le d ev ic e has CEC­compatible devices connected to it, a s eparate device
selection pop-up window appears. For example, the
pop-up window for a C EC -compat ib le D VD player
with a C EC -compatible audio receiver connected
might appear as follows:

-If you pre ss I NP UT t o se le ct a
CEC-compatible device from the pop-up
wind ow, t he d evice may turn on.

You can also change the video input source using the
virtual remote control. On the D-Pad page, tap (input
source), then use the arrows to select the video input
sour ce . Se e D- Pa d .

On-screen menu overview

Notes

-Depending on the signal source selected, you may
see different options on your screen.

-Menu ite ms t ha t ar e not selecta bl e ar e gr ayed out.

Adjusting the picture

This section covers:

-Adjusting the TV p icture

-Adjusting the pic tu re size

-Scrolling the TheaterWide™ picture

-Automatically adjusting the aspect ratio

- Usin g th e 4: 3 St re tch

Adju st in g th e TV p icture

You can adjust various settings to improve the quality
of the TV picture. Also, you can reset all picture
settings to the factory default.

1. Pre ss M EN U, p re ss S or T to highlight Picture,
then p re ss O K.

< Pic ture

Accessibility

Picture

Sound

Options

Installation

timers

Get He lp

Pic ture Mo de Stan dard

Rest

Backlight 85

Con trast 9 2

Bri ghtne ss 50

Col or 50

Tint 5 0

Sharpness 29

Advanced Picture Settings

Display Settings

2. Hig hl ig ht a n op tion, the n pr es s OK . You can selec t:

3. Pre ss W X S o r T to adjust the op ti on o r se lect a
sett in g, t he n pr ess OK.

4. Pre ss E XI T to c lo se t he m enu.

-16-

OPERATION

Adjusting the sound

This section covers:
Adjusting sound settings
Play in g TV aud io o nl y

Adjusting sound settings

You can adjust sound settings to improve the sound
quality.

< Sou nd

Accessibility

Picture

Sound

Options

Installation

timers

Get He lp

1. Pre ss M EN U, p re ss S or T to h ig hlight Sound, then
press OK.

2. Pre ss W X S o r T to adjust the op ti on o r select a
sett in g, t he n pr ess OK.

3. Pre ss E XI T to c lo se t he m enu.

Sou nd Mode S tandard

Rest

Balance 0

Bas s 0

Treb le 0

Aavanced Sound Settings

TV Sp eaker s Auti o

MTS S tereo

Digital Audio Selcetion

Primary Audio Language Englis h

Digital Audio Output

Adjusting the volume

Press VOL+ or VOL– to increase or decrease the
volume.
Press MUTE to mute the sound. Press MUTE again
to tur n th e so un d ba ck on.

Note

If you adjust a s et ting on the S ound menu while the
mute is active, the mute feature is cancelled.

Sele ct in g a ch an nel

Press CH+ or CH– to go to the next or previous
channel on the memorized channel list.
To select a c hannel from the Channel List, press
MENU, select Installation > C hannel Tuning >
Channel List. Press CH+ or CH– to go to the next or
previous channel on the memorized channel list.
To select a d igital sub-channel, press the CH+ or
CH– button to select the sub-channel or select the
sub-channel from the channel list.

Note

Butt on p re ss es m ust be with in t wo s ec onds of eac h
other.You can also use the virtual remote control to
select a sub- channel. On the Number page, tap the
main channel number, t he d ash, the su b- channel
numb er, t he n ta p OK . See Numbe r pa ge o n pa ge 18.

On the virtual remote control on your mobile device,
tap the number buttons to enter the channel number
you want, then tap OK to immediately change the
channel. See Number Press(back) to go to the last
viewed channel.

Viewing channel information

Press INFO. The following status information is
displayed:

- Current video input (for example ANT/CABLE or
AV)

-If ANT/CABLE is the current video input, either
CABL E (f or c ab le T V) o r ANT ( fo r ov er -the-ai r
broadcasts)

-If ANT/CABLE is the current video input, channel
number
Digital signal strength indicator

- If the audio mode is analog, Stereo, Mono, or
SAP analog audio status

- If the input mode is HDMI®, Dolby® Digital, or
PCM

-Video resolution
Aspect ratio of incoming video signal (4:3 or
16:9)

- TV pr ogram or mo vi e ra ti ng

- Game Tim er (if set)

Pressing INFO also displays the following status
information for digital channels:

-Title

-Duration

-Detailed program description

Note

If you p re ss ed I NF O, press IN FO a ga in t o cl ose the
banner.

Controlling CEC-compatible devices

This section covers:

-Tu rn in g HDMI-CE C Co nt ro l on o r off

- Turni ng TV Auto Po we r on o r of f

- Turni ng Au to S ta nd by on or off

-Turning Amplifier Control on or off

-Selecting the audio output

- Using the TV remote to control CEC-compatible
devices

-Using the TV menu to control CEC-compatible
devices

-Sel ec ti ng t he H DMI Input m od e
HDMI C EC Control lets you control HDMI
CEC-compatible devices connected to the HDMI
jacks
on you r TV using t he r em ot e control t ha t ca me w it h
your TV. To use H DMI CEC Control, you must set the
Enable HDMI CEC Control setting on the HDMI CEC
Cont ro l Se tu p me nu to On.

Notes

- HDMI c ables must be used to connect
HDMI CEC-compatible devices to your TV.

- The c onnecte d de vi ce 's HDMI CEC f ea tu re m us t be
turned on.

- If you c on ne ct a n HD MI device t ha t is n ot
HDMI CEC-compatible, none of the
HDMI C EC Control features work.

- Depending o n th e connected HDMI
devi ce , so me H DM I CEC Control features may not
work.

-17-

Note

When you press INPUT, the Input Selection list
opens. If you select a CEC -c ompatible video device
connected to an HDMI jack and that device is
connected to a CEC-comp at ib le a ud io device , a
second selection list opens that shows both devices.
For ex am pl e, i f yo u connect a
CEC- co mp at ib le Blu-ra y pl ay er t o an HDMI jac k an d
the Blu-ray player is connected to a CEC -compatible
soundbar, the se co nd input
selection list might appear as follows:

OPERATION

Turn ing TV Aut o Po we r on or off

TV Auto P ow er a ut om aticall y tu rn s on y our TV w he n
an HDM I CE C de vi ce i s turned on , if t he d ev ice has
this feature.

1. Pre ss M EN U, p re ss S or T to h ig hlight Options,
then p re ss O K.

< Opt ions

Accessibility

Picture

Sound

Options

Installation

timers

Get He lp

Channel Options

Photos

HDM I CEC con trol Se tup

HDM I CEC Pla yer Con trol

HDM I Model Ad vance M ode(2 .0)

Aut o Input S ensin g Off

Input labeling

Power Mangement

Parental PIN Setup

Par ental C ontro l and Loc ks

See Selecting the video input source.

Turning HDMI-CEC Control on or off

Note

If Enable HDMI CEC Control is set to Off, the other
opti on s on t he m en u are graye d an d ca nn ot be used.

1. Pre ss M EN U, p re ss S or T to highlight Options,
then p re ss O K.

< Opt ions

Accessibility

Picture

Sound

Options

Installation

timers

Get He lp

2. Highlight HDMI CEC Control Setup, then press
OK.

Accessibility

Picture

Sound

Options

Installation

timers

Get He lp

Channel Options

Photos

HDM I CEC con trol Se tup

HDM I CEC Pla yer Con trol

HDM I Model Ad vance M ode(2 .0)

Aut o Input S ensin g Off

Input labeling

Power Mangement

Par ental P IN Setu p

Par ental C ontro l and Loc ks

HDM I CEC con trol Se tup

<

Enable HDMI CEC Control on

TV Aut o Power o n

Aut o Stand by o ff

Amplifier Control on

On

Off

2. Highlight HDMI CEC Control Setup, then press
OK.

3. Mak e su re t ha t Enable HDMI CEC Control is set to
On.

<

HDMI CEC control Setup

Accessibility

Picture

Sound

Options

Installation

timers

Get He lp

4. Highlight TV Auto Power, th en p ress OK.

5. Highlight On or Off, then press OK.

6. Pre ss E XI T to c lo se t he m en u.

Turn ing Au to S ta nd by on or off

Auto Standby automatically turns off HDMI CEC

Accessibility

Picture

Sound

Options

Installation

timers

Get Help

Ena ble HDM I CEC Con trol on

TV Aut o Power o n

Aut o Stand by o ff

Amp lifie r Contr ol on

< Opt ions

Channel Options

Photos

HDM I CEC con trol Se tup

HDM I CEC Pla yer Con trol

HDM I Model Ad vance M ode(2 .0)

Aut o Input S ensin g Off

Inp ut labe ling

Power Mangement

Parental PIN Setup

Parental Control and Locks

On

Off

3. Highlight Enable HDMI CEC Control, then press
OK.

4. Highlight On or Off, then press OK.

5. Pre ss E XI T to c lo se t he m enu.

devi ce s wh en y ou t urn off your TV.

1. Pre ss M EN U, p re ss S or T to highlight Options,
then p re ss O K.

2. Highlight HDMI CEC Control Setup, then press
OK.

3. Mak e su re t ha t Enable HDMI CEC Control is set to
On.

-18-

OPERATION

.

4. Highlight Auto Standby, then press OK.

5. Highlight On or Off, then press OK.

6. Pre ss E XI T to c lo se t he m enu.

Turning Amplifier Control on or off

Amplifier Control lets you use your TV's remote
cont ro l to c on tr ol the volu me a nd m ut e the sound o n
an audio receiver.

1. Pre ss M EN U, p re ss S or T to highlight Options,
then p re ss O K.

< Opt ions

Accessibility

Picture

Sound

Options

Installation

timers

Get He lp

Channel Options

Photos

HDMI CEC control Setup

HDMI CEC Player Control

HDM I Model Advance Mode(2.0)

Aut o Input S ensin g Off

Input labeling

Power Mangement

Par ental P IN Setu p

Parental Control and Locks

Sele ct in g th e au dio outpu t

Initial Speaker Setting lets you select whether your
TV's r em ot e co nt rol contr ol s th e TV s pe ak er s or a
connected audio receiver.

1. Pre ss M EN U, p re ss S or T to h ig hlight Options,
then p re ss O K.

< Opt ions

Accessibility

Picture

Sound

Options

Installation

timers

Get He lp

2. Highlight HDMI CEC Control Setup, then press
OK.

3. Mak e su re t ha t Enable HDMI CEC Control is set to
On.

Accessibility

Picture

Sound

Options

Installation

timers

Get He lp

Channel Options

Photos

HDM I CEC con trol Se tup

HDM I CEC Pla yer Con trol

HDM I Model Ad vance M ode(2 .0)

Aut o Input S ensin g Off

Input labeling

Power Mangement

Parental PIN Setup

Par ental C ontro l and Loc ks

<

HDM I CEC con trol Se tup

Ena ble HDM I CEC Con trol on

TV Aut o Power o n

Aut o Stand by o ff

Amp lifie r Contr ol on

Ini tial Sp eaker S ettin g TV

TV

Receiver

2. Highlight HDMI CEC Control Setup, then press
OK.

3. Mak e su re t ha t Enable HDMI CEC Control is set to
On.

<

HDMI CEC control Setup

Accessibility

Picture

Sound

Options

Installation

timers

Get He lp

4. Highlight Amplifier Control, then press OK.

5. Highlight On or Off, then press OK.

6. Pre ss E XI T to c lo se t he m enu.

Ena ble HDM I CEC Con trol on

TV Aut o Power o n

Aut o Stand by o ff

Amp lifie r Contr ol on

On

Off

4. Hig hlight Initial Speaker Setting, then press OK.

5. Highlight TV or Receiver, t he n pr ess OK.

6. Press EXIT to close the menu.

Usin g th e TV r em ot e to contro l CE C- co mp atible
devices

When Enable HDMI CEC Control on the HDMI CEC
Control Setup menu is set to On, you can use the
remo te c on tr ol t hat came wi th y ou r TV t o co nt ro l a
CEC- co mp at ib le device ( su ch a s a DV D or Blu-ra y
player).

Using the TV menu to control CEC-compatible
devices

When Enable HDMI CEC Control on the HDMI CEC
Control Setup menu is set to On, you can use the TV
menu t o tu rn o n a CE C- compati bl e de vi ce (such as a
DVD or B lu -r ay p la yer) and ac ce ss f ea tures on th e
device.

Notes

Thes e fu nc ti on s depend on t he d ev ic es connec te d.
The HD MI C EC P la ye r Control o pt io n is g rayed if:

-A non- HD MI i nput is currently selected.

-The Enable HDMI CEC Control option is set to Off.

-19-

1. Mak e su re t ha t Enable HDMI CEC Control is set
to On. S ee Tu rn in g HD MI-CEC Co nt ro l on o r off .

2. Pre ss M EN U, p re ss S or T to highlight Options,
then p re ss O K.

< Opt ions

Accessibility

Picture

Sound

Options

Installation

timers

Get He lp

3. Highlight HDMI CEC Player Con trol, the n pr es s
OK.

4. Highlight an option, then press OK. You can
select:
Powe r— Turns the selected device on or off.
Root Menu—Accesses the root menu of the selected
device.
Contents Menu—Accesses the contents list of the
devi ce . Wh en y ou p ress OK, th e HD MI C EC P la yer
Control menu closes.
Setu p Me nu —A cc esses the s et up m en u of a
selected device.
Top Menu —A cc es se s the top men u of a s el ec ted
device.
Menu —A cc es se s the menu of a s elected device.

5. Pre ss E XI T to c lo se t he m enu.

Sele ct in g th e HD MI Input mo de

The HD MI j ac ks o n yo ur TV ar e Ultra HD (U HD )
jacks. Depending on the UHD device you connect to
the HD MI j ac k or t he s treamin g co nt en t yo u watch,

you may need to adjust the timing.

Standard Mode:
(1.4)

Channel Options

Photos

HDM I CEC con trol Se tup

HDMI CEC Player Control

HDM I Model Advance Mode(2.0)

Aut o Input S ensin g Off

Input labeling

Power Mangement

Par ental P IN Setu p

Parental Control and Locks

YCbCr 422/444 (supports timing limit on
3840x2160@30Hz)

OPERATION

< Opt ions

Accessibility

Picture

Sound

Options

Installation

timers

Get Help

3. Highlight HDMI Input Mode, then press OK.

4. Highlight Mode 1 or Mode 2, the n pr es s OK .

Usin g th e Me di a Pl ayer

You can connect a USB flas h dr iv e to y ou r TV t o vi ew
photos stored on the flash drive.
This section includes topics about:
Supported photo file formats
Opening the Pho to s vi ew er
Vie wing phot os
Viewing photos in a slideshow

Supported photo file formats

Your TV supports the following photo file formats:
Data t yp e: J PE G EX IF ver 2.1
File f or ma t: J PE G
Maxi mu m ph ot o si ze: 6 MB
Maximum number of files: 500/folder
Maxi mu m ph ot o re solutio n: 4 09 6 × 40 96 pixels

Notes

Connectivity is not guaranteed for all devices.
Connect the USB flash drive to the TV directly.
Do not u se a U SB H ub .
You must obtain any required permission
from copyright owners to use copyright content.
Depending on the file size and amount stored
on the USB flash drive, it may take some time to load
before content is viewable.
Only limited types of U3 USB devices a re
supported. We recommend that you not use
U3 USB w it h th e Me di a Player.
Non-supported characters are replaced with squares.

You ca n al so s elect USB f ro m th e In pu t Selecti on l is t to
open t he P ho to s vi ewer. For mo re i nf or mation, s ee
Selecting the video input source .

Viewing photos

When you connect a U SB f lash driv e th at h as p hotos on
it and o pe n th e Me di a Player, a th um bnail index screen
open s th at s ho ws t he files an d fo ld er s on the flash
drive.

Channel Options

Photos

HDM I CEC con trol Se tup

HDM I CEC Pla yer Con trol

HDMI Model Advance Mode(2.0)

Aut o Input S ensin g Off

Inp ut labe ling

Power Mangement

Parental PIN Setup

Par ental C ontro l and Loc ks

Standard Mode(1.4)

Advance Mode(2.0)

Advance Mode:
(2.0)

1. Mak e su re t ha t Enable HDMI CEC Control is set
to On. S ee Tu rn in g HD MI-CEC Control on or off .

2. Pre ss M EN U, p re ss S or T to highlight Options,
then p re ss O K.

Ycb Cr 420 (s uppor ts timi ng up to
3840x2160@60Hz)

-20-

OPERATION

To navigate the thumbnail index screen:

Pres s S T W or X to h ighlight a folde r or p ho to , th en
press OK.

-Pre ss S T W or X t o highlig ht a f older or photo, then
press OK.

-If you select a f older and press OK, the folder opens
and displays thumbnails of the photos in the folder.
Press to return to the previous thumbnail screen or
folder.

-If you select a p ho to and press OK, the photo is
displayed full-screen.

-If all the photos do not fit on one screen:

-Highlight the top left thumbnail, then press
W to mov e to t he p re vi ous scree n.

-Highlight the bottom right thumbnail, then press X t o
move to the next screen.

To nav igate on a fu ll -screen photo:

-Pre ss W o r X to v ie w th e previous or next photo.

-Pre ss S t o ro ta te t he photo 90° counter-clockwise or
press T to rotate the photo 90° clockwise.

-Pre ss E XI T to c lo se t he M edia Play er. I n th e
message that appears, use W or X to s el ect Yes,
then
press OK.

3. Pre ss W X S o r T to adjust the op ti on o r select a
sett in g, t he n pr ess OK.

4. Pre ss E XI T to c lo se t he m enu.

Changing channel settings

This section covers:
Autom at ic al ly s canning for channels
Manually adding channels to the channel list
Hiding channels

Automatically scanning for channels

When you scan for channels, your TV searches for
channels with signals and stores the channel
information in the channel list. When you press CH+
or CH–, your TV goes to the next or previous channel
in the channel list. The channel scan may take
several minutes.

Note

When you scan for channels, your TV erases any
channels already stored in the channel list.
If a channel is not stored in the channel list, you can:

-Use t he n um be r bu ttons on th e vi rt ua l remote
control to enter the channel number. See N umber
page on page 18.

-Manually add the channel to the channel list if the
channel has a goo d signal strength. See Manually
adding channels to the channel list .

1. Mak e su re t ha t yo u have set up t he
ANT / CABLE IN jac k be fo re p rogramm in g
channels. See Setting up the ANT / CABLE I N ja ck o n
page 50.

2. Pre ss M EN U, p re ss S or T to h ighlight
Installation, then press OK.

< Ins talla tion

Accessibility

Picture

Sound

Options

Installation

timers

Get He lp

Men u Langu age Eng lish

Hom e / Retai l Mode Ho me

Time Z one Eas tern

DAYLI GHT Sav ing Time O ff

Channel Tuning

Quick Setup

Reset TV

3. Highlight Channel Tuning, then press OK.

< Cha nnel Tuning

Accessibility

Picture

Sound

Options

Installation

timers

Get He lp

4. Hig hl ight Auto Tuning, then press OK. Press OK
again to start the scan. Your TV scans for available
channels. The scan may take several minutes.

Notes

If you c re at ed a 4-digit PIN, enter your PIN to start
scanning. For more information, see Setting a new
PIN on p ag e 69 .
You can press EXIT to stop the auto channel search,
but you will need to run the auto channel search again
to cre at e a ch an ne l list.

5. Whe n th e scan is complete, press EXIT to close
the menu. Your TV tunes to the first scanned channel.

Manu al ly a dd in g channel s to t he c ha nn el list

Channels with weak signals may not be added to the
channel list when you scan for channels. You can
manually add a cha nnel to the channel list if you know
the channel number and the channel has a g oo d
signal strength. (Use the number buttons on virtual
remote control to enter the channel number.)

1. Pre ss M EN U, p re ss S or T to highlight
Installation, then press OK.

Accessibility

Picture

Sound

Options

Installation

timers

Get He lp

ANT/CABLE IN
Auto Tuning
Manual Tuning
Channel List

< Ins talla tion

Men u Langu age Eng lish

Hom e / Retai l Mode Ho me

Time Z one Eas tern

DAYLI GHT Sav ing Time O ff

Channel Tuning

Quick Setup

Reset TV

-21-

2. Highlight Channel Tuning, then press OK.

< Channel Tuning

Accessibility

Picture

Sound

Options

Installation

timers

Get He lp

ANT/CABLE IN
Auto Tuning
Manual Tuning
Channel List

3. Highlight Manual Tuning, then press OK.

4. Use t he n um be r bu ttons on th e vi rt ua l remote
control to enter the channel number, the n press OK.
See Channel and Long Press page.
OR
Pres s W or X t o select previous or next channel, then
press OK.

5. Pre ss O K to s ta rt m anual tuning.

6. Pre ss E XI T to c lo se t he m en u.

Hiding channels

You can hide channels in the channel list. When you
press CH+ or CH–, your TV skips the hidden
channels. You can still tune to a hidden channel by
pressing thenumber buttons on the virtual remote
control. See Virtual Remote control on page 17.

1. Pre ss M EN U, p re ss S or T to h ighlight Options,
then p re ss O K.

Accessibility

Picture

Sound

Options

Installation

timers

Get He lp

< Opt ions

Channel Options

Photos

HDM I CEC con trol Se tup

HDMI CEC Player Control

HDM I Model Advance Mode(2.0)

Auto Input Sensing Off

Input labeling

Power Mangement

Par ental P IN Setu p

Parental Control and Locks

2. Highlight Channel Options, then press OK.

OPERATION

3. Hig hlight a channel you want to hide, then press
OK. A check appears in the box next to the channel.

Notes

Channels labeled ATV are analog channels.
Channels labeled DTV are digital channels.
To un-hi de a c hannel, highlight the channel, then
pres s OK t o re mo ve t he check.
You can also lock specific channels so that they
cannot be tuned until you unlock them. See Locking
channels .

4. Pre ss E XI T to c lo se t he m en u.

Sett in g pa re nt al contro ls

Pare nt al c on tr ols let you p re ve nt y our child re n fr om
watc hi ng i na pp ropriat e ma te ri al on TV. When se t,
pare nt al c on tr ols read th e ra ti ng o f the progr am ( wi th
some exceptions, such as news and sports) and deny
acce ss t o pr og ra ms that exc ee d th e ra ti ngs level y ou
select.
Parental controls let you:
Set ra ti ng s fo r TV p ro gr ams and mov ie s so y ou c an
prevent your children from watching inappropriate
mate ri al o n TV
Lock video input sources
Set a ti me r to l im it h ow long you c an p la y a ga me

Note

To watch blocked programs, you must enter a PIN .
Parental control topics include:
Sett in g a ne w PI N
Changing or del et in g th e PI N
Blocking TV programs and movies (for USA region)

Downloading rati ng i nf ormation (for USA region)
Temporarily unlocking programs
Locking video inputs
Locking channels
Setting the GameTimer™

Sett in g a ne w PI N

A PIN is ne ce ss ar y fo r some menu s. The P ar en ta l
Control and Locks menu is gr ay ed out if no PI N ha s
been set.

1. Pre ss M EN U, p re ss S or T to highlight Options,
then p re ss O K.

< Options

Accessibility

Picture

Sound

Options

Installation

timers

Get Help

2 Highlight Parental PIN Setup, then press OK.

Channel Options

Photos

HDMI CEC control Setup

HDM I CEC Pla yer Con trol

HDM I Model Ad vance M ode(2.0)

Aut o Input S ensin g Off

Input labeling

Power Mangement

Par ental P IN Setu p

Parental Control and Locks

-22-

OPERATION

3. Pre ss W o r X on t he n um ber bar at th e bo tt om o f
the screen to select a num be r, then pres s OK .
Repeat this step to enter the other three numbers in
your PIN.
Afte r yo u en te r th e fourth nu mb er, a c on fi rmation
screen opens.

4. Ent er y ou r PI N again to confirm, then press OK.
The Parental PIN Setup menu opens.

5. Pre ss E XI T to c lo se t he m enu.

Note

If you f or ge t yo ur P IN, open th e sc re en w he re you
enter your PIN, highlight Done, then press INFO
four times within five seconds. The PIN is cleared
and yo u ca n en te r a ne w PIN.

Changing or deleting the PIN

1. Pre ss M EN U, p re ss S or T to highlight Options,
then p re ss O K.

Accessibility

Picture

Sound

Options

Installation

timers

Get He lp

< Opt ions

Channel Options

Photos

HDMI CEC control Setup

HDMI CEC Player Control

HDM I Model Ad vance Mode(2.0)

Aut o Input S ensin g Off

Input labeling

Power Mangement

Par ental P IN Setu p

Parental Control and Locks

2. Highlight Parental PIN Setup, then press OK.

5. If yo u se le ct C hange PIN, enter yo ur n ew PIN,
then enter it again.
OR
If you select Delete PIN, press W or X to s el ec t Yes,
then p re ss O K.

6. Pre ss E XI T to c lo se t he m en u.

Bloc ki ng T V pr og rams and mo vi es ( fo r US A
region)

Some TV progra ms a nd m ov ies inclu de r at in gs t hat
clas si fy t he c on tent of the p ro gr am a s un suitabl e fo r
younger viewers. Your TV detects the rat in gs a nd
bloc ks t he p ro gr ams and mov ie s ac co rding to th e
ratings you select.

Notes

You mu st c re ate a PIN bef or e yo u ca n block TV
prog ra ms a nd m ov ies. See Se tt in g a ne w PIN .
To view a pr og ra m or m ov ie rating , tu ne t o th e
prog ra m or m ov ie , then pres s IN FO .

3. Pre ss W o r X on t he n um ber bar at th e bo tt om o f
the screen to select the first number of your PIN,
then press OK. Repeat this step to enter the other

thre e nu mb er s in y our PIN.

Parental PIN Setup

<

Accessibility

Picture

Sound

Options

Installation

timers

Get He lp

4. Highlight Change PIN or Delete PIN, then press
OK.

Channel Pin

PIN

Delete

-23-

TROUBLE SHOOTING

Trouble phenomenon Symptom

Picture Audio

Snow Nois e

Ghos t

Inte rf erenc e

Normal Picture

No pic tu re Mute

No colour Normal audio Colour control

Normal audio

Nois e

Mute

Inspection Check

antenna position, direction
or con ne ct io n

antenna position, direction
or connection

electronic equipment,car/
motorcycle,fluorescent light

Volum e( ch ec k if m ute is
activated or if the audio system
connections are not correct)

Powe r co rd i s no t in serted
Power switch is not opened
Contrast and brightness/volume
setup
Press standby key on the remote
control for inspecting

Pict ure
breaking up

No col ou r

Normal audio
or weak

Nois e

retune channel

TVsystem

The LED TV panel is built with very high precision technology giving you fine picture details
in vibrant color. Occasionally, a few non-active pixels may appear on the screen as a fixed
point of red, green, blue, black or white. Please note this does not affect the performance of
the product.

-24-

Legal notices

FCC Statement Dolby License Notice and Trademark

This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) this device may not cause harmful interference,
and (2 ) th is d ev ic e must acce pt a ny i nt erferen ce
received, including interference that may cause
undesired operation.
This equipment has been tested and found to
comp ly w it h th e li mits for a Cl as s B di gi tal devic e,
purs ua nt t o Pa rt 1 5 of the FCC Ru le s. The se l im it s
are designed to provide reasonable protection
against harmful interference in a res id ential
installation. This equipment generates, uses and
can radiate radio frequency energy and, if not
installed and used in accordance with the
instructions, may cause harmful interference t o
radio communications.
However, ther e is n o guarantee that interference
will n ot o cc ur i n a pa rticular installation. If this
equipment does cause harmful interference to
radio or television reception, which can be
determined by turning the equipment off and on, the
user is encouraged to try to correct the interference
by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment
and receiver.

• Connect the equipment into an outlet on a c ir cu it
different fr om t ha t to w hi ch the rece iv er i s
connected.

• Consult the dealer or an experienced radio/TV
technician for help.

Warning

Changes or modifications not expressly approved
by the party responsible for compliance could void
the us er 's a ut ho rity to ope ra te t he e quipment.

Cables

Connections to this device must be made with
shielded cables with metallic RF/EMI connector
hoods to maintain compliance with FCC Rules and
Regulations.

Canadian Notice

Analog and Digital Television Receiving Apparatus

- Appareil de réception de télévision analogigue et
numérique,Canada BETS-7 / NTMR-7.

IC Statement

This device complies with Industry Canada
licence—exempt RSS standard(s).
Operation is subject to the following two
conditions: (1) this device may not cause
interference, and (2) this device must accept any
interference, including interference that may cause
undesired operation of the device.
This equipment complies with IC radiation
exposure limits set forth for an uncontrolled
environment.

Acknowledgement

Manufactured under license from Dolby
Laboratories. Dolby, Dolby Audio, and the
double-D symbol are trademarks of Dolby
Laboratories.

®

HDMI

The terms HDMI and HDMI High­Definition Multimedia Interface, and the
HDMI L og o ar e tr ad emarks or r eg is te red
trademarks of HDMI Licensing LLC in the
United States and other countries.

DTS Studio Sound

®

For DT S pa te nt s, s ee
http://patents.dts.com. Manufactured
under license from DTS Licensing Limited.
DTS, t he S ym bo l,
& DTS and the Symbol together are
registered trademarks and DTS Studio
Soun d is a t ra demark of DTS, Inc.©
DTS,Inc. All Rights Reserved.

Open Source

This p ro du ct io n contain s Bi ts tr eam Vera San s fo nt s
under the following copyright:
Copyright © 2003 b y Bi ts tr ea m, Inc. All Rights
Reserved. Bitstream
Vera is a t ra de ma rk o f Bitstre am , In c.