JVC LT-42Z10 Instructions Manual

Download

WIDE LCD PANEL TV INSTRUCTIONS

LT - 42Z10

GGT0359-001A-H

Safety precautions ...................................2

Remote control buttons and functions ..... 3

Set up and connections ........................... 4

Initial settings ...........................................6

Registering / Editing channels ................. 7

Channel Summary ...................................8

Operating the menus ............................... 9

PREPARATION

Picture setting ........................................10

Sound setting......................................... 12

Useful functions ..................................... 14

Multi Media Input ................................... 16

Viewing Teletext ..................................... 19

Viewing Closed Caption ........................19

Watching Video or DVDs .......................20

Technical information ............................. 20

Troubleshooting ..................................... 22

CH/CC List ............................................. 23

Speciﬁ cation ..........................................24

FUNCTIONS

REFERENCE

Contents

ENGLISH

GGT0359-001A-H-EN.indd 1GGT0359-001A-H-EN.indd 1 19/07/2010 14:07:4719/07/2010 14:07:47

Thank you for buying this JVC LCD panel television.

To make sure you understand how to use your new TV, please read this manual thoroughly before you begin.

Plane

Follow this manual regarding setup!

•

Connect only to a 110-240 V, 50/60Hz AC outlet.

Make enough room for inserting and removing the power plug!

•

Place the TV as close to the outlet as possible!

•

The main power supply for this TV is controlled by inserting or removing the power plug.

Never cut or damage the power cord!

•

If the AC plug is not the right shape, or the power cord is not long enough, use an

appropriate plug adapter or extension cable. (Consult your retailer)

Unplug the power cord when going out!

•

The power buttons on the remote control and the TV unit cannot completely turn off the

TV. (Make appropriate arrangements for bedridden people.)

Do not allow the TV to fall!

•

Do not rest your elbows on, or allow children to hang from the TV. - There is a risk that the TV will fall and cause injuries.

Make use of the hole on the back of the stand to prevent the TV from falling easily.

If the TV is damaged or behaving strangely, stop using it at once!

•

Unplug the power cord and contact your retailer.

Never place anything on the TV!

•

Placing liquid, naked ﬂ ames, cloths, paper, etc. on the TV may cause a ﬁ re.

Never expose to rain or moisture!

•

To prevent ﬁ re or electric shock, never allow liquids to enter the unit.

Never insert objects into the cabinet openings!

•

It may cause a fatal electric shock.

Take care when children are near.

Hold the TV so as not to scratch the screen!

•

Do not touch the screen when carrying the TV.

Do not carry the TV on your own!

•

In order to prevent accidents, ensure that the TV is carried by

two or more people.

Never insert the power cord by wet hand!

•

It may cause a fatal electric shock.

Keep the TV set away from direct sunlight!

•

TV set can be damaged.

Place the TV set in a neat and dry place. Do not place the product close to

•

source of steam, heat, moisture or oil. Because it may cause a ﬁ re hazard or electric shock hazard! Don’t touch an external metal part of the TV set!

•

It may cause an electrocuted.

For keep a distance from potential ignition sources to the

•

components or part in side TV set, customer should install TV set with a stand within ± 10 perpendicularly degree. Never dismantle the rear panel!

•

It may cause an electric shock.

Never obstruct the ventilation holes!

•

It may cause overheating or a ﬁ re.

Handle LCD panel with care!

•

Use a soft, dry cloth when cleaning.

Never try repair the TV yourself!

•

If the problem cannot be solved in "Troubleshooting" unplug the power cord and contact

your retailer.

If a television is not positioned in a sufﬁ ciently stable location, it can be

•

potentially hazardous due to falling. Many injuries, particularly to children, can be avoided by talking simple precautions such as:

Using cabinets or stands recommended by the manufacturer of the television.

Only using furniture that can safely support the television.

Ensuring the television is not overhanging the edge of the supporting furniture.

Not placing the television on tall furniture (for example, cupboards or bookcases) without

anchoring both the furniture and the television to a suitable support. Not standing the television on cloth or other materials placed between the television and

supporting furniture. Educating children about the dangers of climbing on furniture to reach the television or

its controls.

To prevent accidents, ﬁ rmly attach the TV stands to the TV shelf before • using microphone. Make sure that the subwoofer is in good condition before installing it on • the TV.

If the subwoofer has leakage current, it may damage the TV or cause electric shock. -

For more details on installation, usage and safety • Consult your retailer.

WARNING:

To prevent the spread of ﬁ re, keep candles or other open ﬂ ames away from this product at all times.

Safety precautions

GGT0359-001A-H-EN.indd 2GGT0359-001A-H-EN.indd 2 19/07/2010 14:07:5319/07/2010 14:07:53

RM-C2023

LCD

DISPLAY BACK

VOL

MODE

ZOOM

ECO

TV/VIDEO

RETURN

Clear SD

KARAOKE

DISPLAY

Zoom

Auto Panoramic Regular Panoramic 14:9 Zoom

16:9 Zoom

16:9 Zoom Subtitle Full

16:9 Zoom

1. Select

2. Set

Jan 2010

09 : 08

Su Mo Tu We Th Fr Sa

1 2

3456789 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31

PR List

02 – – – – – – 03 – – – – – – 04 – – – – – – 05 – – – – – – 06 – – – – – – 07 – – – – – – 08 – – – – – – 09 – – – – – –

Remote control buttons and functions

Power On / Off

Operate the menu

Change channel / Page / Hyper Scan

Colour buttons

To previous screen

Channel information

Turn on "Clear SD"

Turn on "Sound Meister"

Select the input Source (P.20)

Turn on "Zoom"

Volume control / Turn off muting

Return Plus / Return function

Turn on "Eco Sensor"

Function for viewing Teletext and "Multi Media Input"

Change channel / Page

Turn on "Karaoke"

Turn the volume off / on

Favourite channel setting

To Teletext

Turn on "Freeze" / Setup data

Display on-screen menu

Zoom : Change the aspect ratio.

Return Plus : Return to the frequently viewed channel

Return : Return to the previously viewed channel.

Favourite channel setting.

1. Register the favourite channel 2. Recall the favourite channel Press

number button (1-4 only)

Press number button (1-4 only)

Press and hold Press

WARNING:

Batteries shall not be exposed to excessive heat such as direct sunshine, ﬁ re or the like.

If this symbol is shown, it is only valid in the European Union.

"AAA/R03" Batteries

If the favourite channel has not been registed

•

then "No memory" will be displayed.

Return Plus Programmed by select the frequently viewed channel then press and hold

RETURN+

Return Plus Canceled by press and hold

RETURN+

Press and hold CH. PR changes without changing the picture screen. Once you release the button, the picture of the selected PR will appear.

Move the picture with or while this bar is displayed.

V-Scroll

Hyper Scan :

Set 1-4 ? Favourite 1-4 ?

Programmed! will be displayed.

Insert the batteries

•

Use two "AAA/R03" dry cell batteries. Insert the batteries from the end, making sure the and polarities are correct.

Channel information

No Indication

PR List Calendar

GGT0359-001A-H-EN.indd 3GGT0359-001A-H-EN.indd 3 19/07/2010 14:07:5619/07/2010 14:07:56

VIDEO-2

CHANNEL

VOLUME

MENU/OK

TV/VIDEO

Set up and connections

Care when setting

Connect an aerial and VCR / DVD Player

Hole for belt (under the stand)

Screw for attach the belt to the stand (provided)

200 mm

150 mm150 mm 50 mm 50 mm

Screw (not provided)

Belt (provided)

Select the input Source (P. 20)

Display on-screen menu / set Change channel / Page / Hyper Scan Function (P. 3) Volume / Adjust

Power On / Off

Microphone

Power requirements

■

Connect the power cord only to a • 110-240V, 50/60Hz AC outlet.

When attaching the TV to the

■

wall, use the optional JVC wall mounting unit

Consult a qualiﬁ ed technician.• JVC assumes no responsibility for • damage due to improper mounting. 400 mm x 200 mm mount which • conforms to VESA standards.

Installation requirements

■

To avoid overheating, ensure the • unit has ample room.

After all the connections have • been made, insert the plug into an AC outlet.

AERIAL

VCR (DVD Player)

To prevent the TV from falling

•

thread the belt through the hole on the back of the stand and secure it to the TV rack.

If the microphone is installed,

•

should be lock it’s cable follow picture.

Power lamp

ON : Lit (Blue) OFF : Unlit

Power lamp lights while the TV is on.

"Power Lamp" (P. 15)

•

Remote control sensor / Eco Sensor

Stand Assembly

Change the direction of TV

GGT0359-001A-H-EN.indd 4GGT0359-001A-H-EN.indd 4 19/07/2010 14:08:0019/07/2010 14:08:00

HDMI-1

DVI ANALOG AUDIO

VIDEO-1

SUBWOOFER

OUTPUT

VIDEO-2

PC AUDIO

(

PC IN D-SUB

(

Pb Y

VIDEO-1

(L) (R)

HDMI-1 HDMI-3HDMI-2

DIGITAL VIDEO/AUDIO

You can connect many different devices to the rear panel of the TV. Please read the user manuals of each device before setup. (Connecting cables are not supplied with this TV.)

Component input

Game consoles

Video camera

VIDEO-1 Watching videos

Output Input

Composite signal / • Component signal (P. 24) Sound L / R•

Use Component signal • "Video - 1 Setting" (P. 20)

VIDEO-2 Watching videos

Output Input

Composite signal• Sound L / R•

HDMI-1 HDMI-2

Connecting HDMI devices

HDMI-3

Output Input

HDMI signal (P. 24)•

"HDMI Setting" (P. 20)• HDMI-2 and HDMI-3 inputs do not • support analogue sound. Connect a "DVI" device to • "HDMI-1" (P. 20) Please use a High Speed HDMI•

Cable. High Speed HDMI

Cables are tested to carry an HD signal up to 1080p and higher.

OUTPUT

Subwoofer and sound signal of a TV channel you are viewing outputs from this terminal

Output

Subwoofer signal• Sound L / R•

Composite input

Game Video

VCR

PC input line in

HDMI

Connector.

DVD Player

Ampliﬁ er

Subwoofer

(not provided)

DVD player (HDMI compatible)

Microphone

DVD player (HDMI compatible)

HD Video camera

Set up and connections (continued)

To "HDMI-1" To "HDMI-3"

To "HDMI-2"

Check for PC compatibility. • "PC signals that can be displayed" (P. 21)•

To Video-2

GGT0359-001A-H-EN.indd 5GGT0359-001A-H-EN.indd 5 19/07/2010 14:08:2619/07/2010 14:08:26

1. Select

2. Set

1. Select

2. Set

1. Select

2. Set

Select

> Edit

ID CH/CC 01 CH 02

02 CH 03 03 CH 07 04 CH 76 05 CH 12 06 CH 09 07 CH 05 08 CH 02 09 CH 15 10 CH 28

Set Up

> Channel Summary

CH/CC ID Skip

CH 02

CH 03

CH 04 CH 05 CH 06 CH 07 CH 08 CH 09 CH 10 CH 11

Set Up

>> Auto Program

50%

CH 40

Set Up

> Teletext Language

Group-1

Group-2 Group-3 Group-4 Group-5 Group-6

Set Up

> Auto Program

Air

Cable

Set Up

> Country Area

Area - 1

Area - 2

> Language

English

Укрaїнcькa Castellano

Français Melayu Pуccкий

Português

Tiếng Việt

Set Up

> Auto Program

50%

CH 40

If you want to edit channel, see • "Registering / Editing channels" (P. 7)

If you want to set undesired channels

•

to be skiped, see "Channel Summary" (P. 8)

See "Language group for Teletext" (P. 21).•

Initial Settings

Show only when powering on for the ﬁ rst time.• The power on the unit can also be used.•

The select the new Country Area after Initial Setting has completed.•

Area-1 : Asia, Middle East, Europe, Oceania, Africa Area-2 : South America, Philippines

(While the cursor is pointing to Picture menu and hold for 3 seconds.)

1 Turn on the TV.

4 Select the Teletext language group. 4 Select Air or Cable.

2 Select a language. 3 Select Country Area.

5 Automatically register channels (Auto Program).

5 Searching for the channels (Auto Program).

6 Check what was registered.

JVC logo appears

If you select Country Area to "Area-1" If you select Country Area to "Area-2"

GGT0359-001A-H-EN.indd 6GGT0359-001A-H-EN.indd 6 19/07/2010 14:08:4219/07/2010 14:08:42

(Red)

(Green)

(Blue)

1. Select the character

3. Set

2. Move to the next column

> Edit

ID CH/CC 01 CH 02

02 CH 03 03 CH 07 04 CH 76 05 CH 12 06 CH 09 07 CH 05 08 CH 02 09 CH 15 10 CH 28

Set Up

> Edit

PR ID CH/CC 01 CH 02

02 CH 03 03 CH 07 04 CH 76 05 CH 12 06 CH 09 07 CH 05 08 CH 02 09 CH 15 10 CH 28

Set Up

> Edit

ID CH/CC

01 CH 02 02 CH 03 03 A

CH 07 04 ABCDEF CH 76 05 CH 12 06 CH 09 07 CH 05 08 CH 02 09 CH 15 10 CH 28

Set Up

> Edit

PR ID CH/CC

01 CH 02 02 CH 03 03

04 ABCDEF CH 76 05 CH 12 06 CH 09 07 CH 05 08 CH 02 09 CH 15 10 CH 28

Set Up

> Manual

ID CH/CC

01 CH 02 02 CH 03

03 BBCABC CH 07 (B/G)

04 ABCDEF CH 76 05 CH 12 06 CH 09 07 CH 05 08 CH 02 09 CH 15 10 CH 28

Setup

Select a channel

1. Select a CH/CC

Finish

1. Start

2. Move

2. Set

2. Enter a number 0-9 button then, receives the broadcast signal.

This function is available when select Country Area to "Area-1" only. You can edit the channel list or register new channel manually.

Channel ﬁ ne tunning

•

(Yellow) /(Blue)

If the picture or sound is unnatural • for select a system.

From high frequencies

From low frequencies

Insert / Delete

Manual

ID Edit a channel name

Insert / Delete a channel

Move Move a channel position.

Delete a channel by press

•

(Yellow)

button.

1. Beginning channel search

"CH/CC List" (P. 23)•

Registering / Editing channels

(Red) (Green)

GGT0359-001A-H-EN.indd 7GGT0359-001A-H-EN.indd 7 19/07/2010 14:08:5419/07/2010 14:08:54

(Red)

(Green)

(Yellow)

1. Select the character

3. Set

2. Move to the next column

Select a channel

> Channel Summary

CH/CC

ID Skip

CH 02 Yes

CH 03 Yes

CH 04 Yes CH 05 Yes CH 06 Yes CH 07 Yes CH 08 Yes CH 09 Yes CH 10 Yes CH 11 Yes

Set Up

> Channel Summary

CH/CC

ID Skip

CH 02

CH 03

CH 04 CH 05 CH 06 CH 07 CH 08 CH 09 CH 10 CH 11

Set Up

> Channel Summary

CH/CC

ID Skip

CH 02

CH 03

CH 04 Yes CH 05 Yes CH 06 Yes CH 07 Yes CH 08 Yes CH 09 Yes CH 10 Yes CH 11 Yes

Set Up

> Channel Summary

CH/CC ID Skip

CH 02

_ _ _ _ _ _

CH 03

_ _ _ _ _ _

CH 04

_ _ _ _ _ _

Yes

CH 05

_ _ _ _ _ _

Yes

CH 06

_ _ _ _ _ _

Yes

CH 07

_ _ _ _ _ _

Yes

CH 08

_ _ _ _ _ _

Yes

CH 09

_ _ _ _ _ _

Yes

CH 10

_ _ _ _ _ _

Yes

CH 11

_ _ _ _ _ _

Yes

Set Up

This function is available when select Country Area to "Area-2" only. You can edit the channel list.

Skip

Cancel

Skip the channel.

Cancel the skip channel.

Edit a channel name.

Channel Summary

Channels are to be skipped cannot be selected by the • CHANNEL -/+ button. The skip can be set to all channels of Air (CH02 - CH69) • and Cable (CC01 - CC125)

GGT0359-001A-H-EN.indd 8GGT0359-001A-H-EN.indd 8 19/07/2010 14:09:0619/07/2010 14:09:06

Operating the menus

You can select the Country Area between Area-1 and Area-2. See in item 3 of "Initial setting" (P. 6) See the menus location in the below table.

Set Country Area to "Area-1"

Top Menu 2nd Menu Page

Picture Picture Mode 10

Backlight 10 Contrast 10 Brightness 10 Sharpness 10 Colour 10 Tint 10 White Balance 10 Features 11

Sound

Stereo / I▪II

-Sound Meister 12 Treble 12 Bass 12 Surround 12 Balance 12 Voice Enhancer 12 AI Volume 12 Subwoofer Out 13 Subwoofer Level 13 Karaoke 13

Features On Timer 14

Sleep Timer 14 Calendar 14 Channel Guard 14 Blue Back 15 Child Lock 15 Auto Shutoff 15 Favorite Setting 15 Power Lamp 15 Eco Sensor 15

Set Up Auto Program 6

Edit / Manual 7

-Language 6 Video-1 Setting 20 Rocket Start 15 Teletext Language 6 HDMI Setting 20 PC Setting 20

Set Country Area to "Area-2"

Top Menu 2nd Menu Page

Picture Picture Mode 10

Backlight 10 Picture 10 Brightness 10 Detail 10 Color 10 Tint 10 White Balance 10 Features 11

Sound

MTS 12 Sound Meister 12 Treble 12 Bass 12 Surround 12 Balance 12 Voice Enhancer 12 AI Volume 12 Subwoofer Out 13 Subwoofer Level 13 Karaoke 13

Features On Timer 14

Sleep Timer 14 Calendar 14 Channel Guard 14 Blue Back 15 Child Lock 15 Auto Shutoff 15 Favorite Setting 15 Power Lamp 15 Eco Sensor 15

Set Up Auto Program 6

-Channel Summary 7 Language 6 Video-1 Setting 20 Rocket Start 15

-HDMI Setting 20 PC Setting 20 Closed Caption 19

GGT0359-001A-H-EN.indd 9GGT0359-001A-H-EN.indd 9 19/07/2010 14:09:1219/07/2010 14:09:12

1. Select

3. Finish

2. Adjust

1. Select

2. Enter

Enter

Picture Mode Bright Backlight Contrast Brightness Sharpness Colour Tint White Balance Warm Features

Picture

Picture ModeeBright

Backlight Contrast Brightness Sharpness Colour Tint White Balance Warm Features

Picture

Picture Mode

You can select a preset picture setting according to your favour.

Bright : Hightens contrast and sharpness. Game Mode : Adjust sharpness of the picture when play the game. Soft : Softens contrast and sharpness. Standard : Standardize picture adjustment.

Backlight

You can change the backlight brightness.

Darker ↔ Brighter

Contrast

You can change the contrast of the picture.

Lower ↔ Higher

Brightness

You can change the brightness of the picture.

Darker ↔ Brighter

Sharpness

You can change the sharpness of the picture.

Softer ↔ Sharper

Colour

You can change the colour of the picture.

Lighter ↔ Deeper

Tint

You can change tint only in NTSC.

Reddish ↔ Greenish

White Balance

You can change the white balance of the picture to better match the type of video being view.

Mid : Normal white colour. Cool : Bluish white colour. Warm : Reddish white colour.

Picture setting

1. Display "Picture" menu 2. Select item and setting or adjust To enter an items menu•

GGT0359-001A-H-EN.indd 10GGT0359-001A-H-EN.indd 10 19/07/2010 14:09:1319/07/2010 14:09:13

16 : 9

Panoramic

4 : 3

Regular/Slim

14 : 9

14:9 Zoom

Picture > Features Clear SD

Off

Digital VNR

Off DigiPure Off Pull Down Off Colour Management Off Picture Management Off Smart Picture Off Dynamic Backlight Off MPEG Noise Reduction

Off Colour System

Zoom

Picture >> Zoom Auto

Panoramic

Regular Panoramic 14 : 9 Zoom 16 : 9 Zoom 16 : 9 Zoom Subtitle Full

Features

When 720p or 1080i or 1080p signal is • received, "Full", "Slim" and "Panoramic Zoom" can be selected. In PC mode, "Regular" and "Full" can be • selected.

Finer Picture adjustment

Picture setting (continued)

Clear SD

For clearly picture (Off / Mode-1 / Mode-2) : When Clear SD set to Mode-1 or Mode-2, then Digital VNR, DigiPure, Picture Management and MPEG Noise Reduction cannot operate.

Digital VNR Reduce the amount of noise in original picture. (Off / On) :

DigiPure For natural - looking outlines (Off / On) :

Pull Down For smooth cinema ﬁ lm (Auto / Off / On) :

Colour Management For natural - looking pictures (Off / On) :

Picture Management Fix bright / dark pictures. (Off / On) :

Smart Picture Make it easier to view white areas (Off / On) :

Dynamic Backlight Reduce the brightness of the backlight when the screen is dark. (Off / On) :

MPEG Noise Reduction

Reduce MPEG video noise. (Off / On) :

Colour System

When there is no colour, change the colour system.

( Area-1 : PAL / SECAM / NTSC 3.58 / NTSC 4.43 / Auto, Area-2 : PAL-M / PAL-N / NTSC / Auto )

Zoom Change the aspect ratio. :

GGT0359-001A-H-EN.indd 11GGT0359-001A-H-EN.indd 11 19/07/2010 14:09:1619/07/2010 14:09:16

Enter

1. Select

2. Adjust

Stereo / I▪II

O Mono

Sound Meister Dynamic

Treble Bass

Surround Balance Voice Enhancer Off AI Volume On Subwoofer Out Off Subwoofer Level Karaoke

Sound

MTS Stereo SAP Mono

On Air Sound Meister Dynamic

Treble Bass

Surround Balance Voice Enhancer Off AI Volume On Subwoofer Out Off Subwoofer Level Karaoke

Sound

Stereo / I▪II

I II Mono

Sound Meister

Dynamic Treble Bass Surround

Balance Voice Enhancer Off AI Volume On Subwoofer Out Off Subwoofer Level Karaoke

Sound

Stereo/I■II

Select the broadcast sound stereo, mono or bilingual language. ( : Mono / : Stereo / I : SUB1 / II : SUB2 / Mono)

MTS

Select the stereo and SAP broadcasted programs. (Stereo : Stereo sound / SAP : Second Audio Programs / Mono : mono sound)

Sound Meister Ambience (Off / Dynamic / Pure / Living)

Treble Compensates high frequencies to widen the frequency band. (Weaker ↔ Stronger)

Bass Compensates low frequencies to widen the frequency band. (Weaker ↔ Stronger)

Surround Expands the stereo sound naturally. (Narrow ↔ Wide)

Balance Speaker balance (Left Stronger ↔ Right Stronger)

Voice Enhancer Sound enhancement technology. (Off / On)

Al Volume Prevent sudden increase or decrease of sound when changing channels. (Off / On)

1. Display "Sound" menu. 2. Select item and setting or adjust. Set Country Area to "Area-1"

• Set Country Area to "Area-2"•

Sound setting

GGT0359-001A-H-EN.indd 12GGT0359-001A-H-EN.indd 12 19/07/2010 14:09:2019/07/2010 14:09:20

KARAOKE

Karaoke

Off

Main Volume Microphone Volume

Subwoofer Out

Chooses to connect subwoofer. (Off / On)

Subwoofer to be used must have a built-in ampliﬁ er.•

Subwoofer Level

Adjusts sound level of your subwoofer. (Lower ↔ Louder)

When Subwoofer Out set to On, you can adjust Subwoofer Level.

•

Karaoke

You can enjoy to reduce the vocals for your own karaoke.

Karaoke Chooses to reduce the vocals.

Off : Normal sound of song

Mode-1 : Only sound of music

Mode-2 : To sing, accompanying with sound of song.

Karaoke function works only for stereo sound system.

•

If using Karaoke disc, users must choose to remove the vocals from the player.•

Main Volume Adjusts volume level. (Lower ↔ Louder) Microphone Volume Adjusts volume level of microphone. (Lower ↔ Louder)

Microphone Volume is available when plug in microphone.

•

Microphone to be used with the "• Karaoke" function of JVC must be of "HIGH GRADE LOW NOISE MICROPHONE

CABLE" type; otherwise, noise will result.

Sound setting (continued)

GGT0359-001A-H-EN.indd 13GGT0359-001A-H-EN.indd 13 19/07/2010 14:09:2419/07/2010 14:09:24

1. Select

3. Finish

2. Adjust

1. Select

2. Enter

Enter

2. Select item

1. Select a number

3. Enter

2. To the next column

(Blue)

1. Select a channel

1. Adjust

2. Set

Select PR channel

2. Set

1. Select a time in minutes

3. Set

1. Select "On Timer"

2. Set

On Timer

Sleep Timer

Calendar

Channel Guard Blue Back Off Child Lock Off Auto Shutoff Off Favourite Setting

Power Lamp On Eco Sensor On

Features

On Timer

Sleep Timer

Calendar

Channel Guard Blue Back Off Child Lock Off Auto Shutoff Off Favourite Setting

Power Lamp On Eco Sensor On

Features

1. Select item

> On Timer PR

e01f

On Timer

00 : 00

Features

> Calendar Calendar

eOnf

Date / Time

Position

Features

> Set ID No.

Features

0 0 0 0

>> Channel Guard

PR ID CH/CC 01

SAT CH 02

02 GAME CH 03 03 BCC CH 07 04 IEEE CH 76 05 APL CH 12 06 DANY CH 09 07 CH 05 08 CH 02 09 CH 15 10 CH 28

Features

>> Date / Time Time

8:08

Date 18/08/10

Features

Lock / Release

Jan 2010

09 : 12

Su Mo Tu We Th Fr Sa

567891011

12 13 14 15 16 17 18

19 20 21 22 23 24 25

26 27 28 29 30 31

> Sleep Timer

Features

Off

1200

On Timer

TV to turn on automatically from standby mode at a set channel and time.

Sleep Timer

TV to turn off automatically to standby mode after a set time.

Calendar

Watch calendar, date and time on screen LCD TV.

Channel Guard

Stop children from watching speciﬁ c channels.

1. Select PR channel that you want to watch. 2. Set the On time to your desired period at time.

Useful functions

• To enter an items menu

1. Display "Features" menu.

2. Select item and setting or adjust.

View a locked channel by use the numerical buttons to enter the channel number. When

• appears, press "DISPLAY"

button and enter your "ID No."

1. Select "Calendar" to On.

Note : Press

(Blue)

for reset time setting.

2. Set "Time" and "Date". 3. Set "Position" for adjust screen position.

Note : When the remaining elapse is one minute,

"Good Night!" appears on the screen.

Note : After unplugging the TV,

this function will be reset.

1. Select "Channel Guard".

2. Select a channel and lock it (

: locked ).

GGT0359-001A-H-EN.indd 14GGT0359-001A-H-EN.indd 14 19/07/2010 14:09:2519/07/2010 14:09:25

(Blue)

To Delete

> Favourite Setting

PR 32

PR 05

PR 07

PR 09

Features

> Favourite Setting

PR 01

PR 02

Features

1. Select

Blue Back Display a blue screen and mute the sound when the signal is weak or absent. (Off / On)

Child Lock Disables the side control buttons of the TV. (Off / On)

Auto Shutoff Set the power to turn off if no signal is received and no operation is performed for about 15 minute. (Off / On)

Favourite Setting

Delete the favourite channel that you registered.

Power Lamp Power lamp lights while the TV is on. (Off / On) (P. 4)

Eco Sensor

Automatically adjusts the picture contrast according to the brightness of your room to reduce power consumption.

Off : Deactivates the function On : Activates the function. Demo : Display the effect of the "Eco Sensor" on the screen. MAX-Eco : Only sound is available, no picture (this is to save energy in such situation as when you want to listen to the

news while doing other house works at the same time).

After choosing Eco Sensor as Max-Eco, picture will go off in 3 seconds.

When you want the picture to appear again, press any button on the remote control then function will be - reset back to "Off". After unplugging the TV or press "Power off" button, this function will be reset back to "Off" -

Rocket Start

TV can turn on quickly. ( Off / On ) When Rocket Start is On, power consumption at standby mode will more than normal standby mode.

Freeze

Take snapshots of the screen.

"Set up" Menu

Useful functions (continued)

You cannot save or export the snapshot.• Freeze function is not available for HDMI, PC • and Component signal.

■ Cancel

Press "OK " again, or change the channel.

still picture

Freeze

GGT0359-001A-H-EN.indd 15GGT0359-001A-H-EN.indd 15 19/07/2010 14:09:3919/07/2010 14:09:39

TV/VIDEO

AV Select

011

1 SD / USB

2 HDMI I 1 3 HDMI I 2 4 HDMI I 3 5 Video - 1 6 Video - 2 7PC

2. Set

1. Select

Home

SD/MMC USB SETTINGS

2. Set

1. Select

Multi Media Input

1 Insert an SD card / USB device into the SD card slot / USB terminal

on the side of the TV.

TV will auto detect and display signals in accordance with Article 3

automatically.

3 Select "SD/MMC" or "USB"

2 When you change the channel to see other signals. You want to view

ﬁ les from USB or SD card again, you have to set the input to "1 SD / USB".

Allows you to enjoy pictures, musics, movies and text ﬁ les stored on your USB device or SD card you have connected to the terminal of the TV.

Cautions

Insert or remove SD cards and USB devices gently and in the right direction.

Otherwise, the devices or the TV may be damaged.

It is recommended to keep a backup of your ﬁ les.

Do not connect a mouse, keyboard or the like. - Do not use a USB hub or extension cable. -

Slide the SD card into the slot until it clicks into place. - To remove the SD card, push it in until it clicks and then pull it out -

If you want to setting, select "SETTINGS" Slideshow duration Select how long each picture is displayed for

during slide shows. (3S / 5S / 15S / 1mins / 15mins / 1hour )

Slideshow mode Select the format for displaying pictures in

slide show mode. (off / Bottom To Top / Top To Bottom / Left To Right / Right To Left / Door Close / Door Open / Hori Cross / Verti Cross / Random / Fading)

Music repeat mode Select Repeat to play musics. (Repeat All /

Repeat One)

Movie repeat mode Select Repeat to play movies. (Repeat All /

Repeat One) Default Return to the default. The icon device in Home menu will be displayed according to the

device you have connected (SD/MMC or USB).

SD card

USB device

Side Panel

GGT0359-001A-H-EN.indd 16GGT0359-001A-H-EN.indd 16 19/07/2010 14:09:4219/07/2010 14:09:42

SELECT MEDIA

PHOTO MUSIC MOVIE TEXT FILE

2. Set

1. Select

PHOTO

C:/

228086.jpg

MUSIC

D:/VIDEO_TS/

I love you.wma

Title : Artist : Album : Year :

Miss you.wav

Lot of love.mp3

0322

Multi Media Input (continued)

5.1

PHOTO

Some ﬁ les may be displayed with bands around the edges.

To see the next / previous ﬁ le, press - / .

To exit the full-screen display and show the folder index, press - . The thumbnails of some ﬁ les may not be shown. - This TV can only display ﬁ le names as alphabetical letters. - Photographs with large ﬁ le-sizes may take a while to be displayed. - This TV can not play some ﬁ les. Including ﬁ les that are changed - on the PC, even a ﬁ le format is compatible. Depending on the speciﬁ cations of the ﬁ le. To listen to music during a slideshow, press - . (Music ﬁ le must exist in your USB or SD card) If the image displayed within more than one full screen. Arrows are - shown at the bottom of the screen to choose to display the next / previous screen.

Press

- to display the control operation bar, select left or right

button for choose operations, then press

MOVIE ﬁ le ; Supported up to 720 x 576 x 24 or 800 x 600 x 30

compressed video resolution (SD mode)

Select a photograph to display, and press or . The selected photograph is displayed full-screen.

PHOTO View picture from your USB device or SD card. MUSIC Listen music from your USB device or SD card. MOVIE Watch movie from your USB device or SD card. TEXT View (*.txt) ﬁ le from your USB device or SD card. FILE Copy or delete your ﬁ les in USB device or SD card.

SD card and USB can support ﬁ les as

PHOTO : JPEG, PNG, BMP, GIF MUSIC : MP3, WMA, WAV MOVIE : MPEG1, MPEG2, MPEG4, RMVB TEXT : Text

Select audio language in MOVIE Play music while viewing PHOTO

Select previous / next chapter

Rewind Stop

Play / Pause Zoom

Forward

Menu bar to control playback.

Rotate photo 90º

Buttons for Multi Media

5.2 MUSIC

Once the music is selected, It will be run automatically. The detail of - that song will be shown inside the frame on the right. After ﬁ nish that song, the next will be played accordingly. To play or pause the song, just press - or . To control the sound volume, just use VOL +/- button or press

- to

silent mode.

Press

- or to stop the music.

To show the ﬁ les in a folder, press - on the folder.

GGT0359-001A-H-EN.indd 17GGT0359-001A-H-EN.indd 17 19/07/2010 14:09:5619/07/2010 14:09:56

TEXT

D:/

DCIM File name : DCIM

JVC demo File type : Folder

New Folder (2)

FILE

D:/

DCIM File name : DCIM

JVC demo File type : Folder

New Folder (2)

MOVIE

D:/VIDEO_TS/

Abc File name : Abc

Xyz File size : 229MB

Pop File type : Div

Copy >

C: JOHN / NEW / DP D: MARY

Delete >

FILE

D:/VIDEO_TS/

I love you.wma

FILE

I love you.wma

Copy >

Delete >

D:/VIDEO_TS/

FILE

D:/VIDEO_TS/

I love you.wma

5.3 MOVIE

5.4 TEXT

5.5 FILE

Copy (ﬁ le)

When the movie ﬁ le is selected the highlight bar, the detail of that

movie will be shown inside the frame on the right. To play or pause the movie, press - or . To control the sound volume, use the VOL +/- button or press - to silent mode. Press - to enlarge the picture with double, 4 times, 8 times and 16 times. Press - to select audio language (if your ﬁ le have many audio languages)

Press

- to display the control operation bar, select left or right

button for choose operations, then press

To show the ﬁ le in a folder, press

- on the folder.

Use Up / Down button to move the highlight bar to the ﬁ le to be - opened, then, press to open.

Press

- or button to exit from the Text which being run and

back to the Text list.

To show the ﬁ le in a folder, press

- on the folder.

Use Up / Down button to move the highlight bar. - Press right arrow button or - , you can enter into the ﬁ le you chose. Press the left arrow button, you can exit and back to previous - status.

1. Move the highlight bar to the ﬁ le that you want to copy.

2. Press right arrow button, then a remark will be showed on the right of the ﬁ le you selected.

3. To make another copy, just repeat the step of No.2.

4. After ﬁ le is selected, press

Then, indication of [Copy] and

[Delete] to be seen.

Multi Media Input (continued)

5. Select [Copy] then press , you will enter to the next stage. Select the drive C: or D: that you want to copy the ﬁ les stored. Press right arrow button for copy selection to inside folder.

6. After selection, press

to start

the process when ﬁ nished press

again.

1. Move the highlight bar to the ﬁ le you want to delete.

2. Press right arrow button, then a remark will be showed on the right of the ﬁ le you selected.

3. To make another delete, just repeat the step of No.2.

4. After ﬁ le is selected, press

Then, indication of [Copy] and

[Delete] to be seen.

5. Select [Delete] then press

you will enter to the next stage.

6. Select [ √ ] to Delete. (If you want to cancel delete select [ X ] )

7. Press

when ﬁ nished press again, The ﬁ le that you delete is disappear.

About SD cards and USB devices.

When using miniSD cards or

microSD cards, put them in an appropriate adapter before inserting them into the TV. Not all SD cards or USB devices - are guaranteed to work on this TV.

Delete (ﬁ le)

GGT0359-001A-H-EN.indd 18GGT0359-001A-H-EN.indd 18 19/07/2010 14:09:5819/07/2010 14:09:58

1. Select item

3. Set

2. Setting

Enter

1. Select

2. Enter

> Closed Caption

Closed Caption Off

Caption

CC1

Text T1

Set Up

TEXT--TEXT---

When watching TV TV TEXT TEXT

Auto Program

Channel Summary

Language

Video-1 Setting

Component

Rocket Sart

HDMI Setting

PC Setting

Closed Caption

Set Up

Auto Program

Channel Summary

Language

Video-1 Setting

Component

Rocket Sart

HDMI Setting

PC Setting

Closed Caption

Set Up

List Mode

Bookmark your favourite page.

to bookmark

Press number button for enter the number of page.

Save

(Red) (Green) (Yellow) (Blue)

MODE

Recall your favourite page by press the colour button.

•

Hold

Hold the current page.

Cancel by press this button again.•

Reveal

Display hidden information.

Example : answer to a quiz, etc.•

Size Double the size of the displayed text.

Index

Returns to page "100" or a previously designated page.

Cancel

Leave the current page open, while you switch to watch TV.

Useful when running a page search.•

Sub-page

Display the number of Sub-page.

Cancel by press this button again.•

Closed Caption : Select to view close caption or text information.

(Off / CC / Text)

Caption : Select the desired caption.

(CC1 / CC2 / CC3 / CC4)

Text : Select the desired text channel.

(T1 / T2 / T3 / T4)

2. Select "Closed Caption"

1. Select "Set Up".

3. Select the desired caption or text channel.

Viewing Teletext Viewing Closed Caption

This function is available when select Country Area to "Area-1" only. This TV can display TV broadcasts and Teletext on the same channel in two windows.

Select a Teletext page by press number button (0-9).

• Move up or down a page by

GGT0359-001A-H-EN.indd 19GGT0359-001A-H-EN.indd 19 19/07/2010 14:09:5919/07/2010 14:09:59

TV/VIDEO

AV Select

011

1 SD / USB 2 HDMI I 1 3 HDMI I 2 4 HDMI I 3 5 Video - 1 6 Video - 2 7PC

1. Select

2. Set

Enter

Auto Program

Edit / Manual

Language

Video-1 Setting

Component

Rocket Sart

Teletext Language

HDMI Setting

PC Setting

Set Up

Select the input Source.

Operate the connected device and play video.

•

1. Select "Set Up".

2. Select item.

Watching Video or DVDs

Auto Program

Edit / Manual

Language

Video-1 Setting

Component

Rocket Sart

Teletext Language

HDMI Setting

PC Setting

Set Up

1. Select item

3. Set

2. Setting or Adjust

Video - 1 Setting

Switch between video and component signal. (Video / Component)

HDMI Setting Setting for HDMI input

> HDMI Setting

HDMI-1

Size

Auto

Aduio

Digital

Mode 1

HDMI-2

Size Auto Mode 1

HDMI-3

Size Auto Mode 1

Set Up

Size

Normally set to "Auto." If wrong : screen size appears in 480p (525p), change to "1" or "2".

Audio

Normally set to "Auto." If no sound, : change to "Analogue" or "Digital.

Mode

If no picture, change to "1" or "2". :

PC Setting

Setting for PC input

> PC Setting PC Position

Phase Pixel

Set Up

1. Adjust

2. Set

1. Select PC Position

2. Enter

PC Position : Adjust screen position. Phase : Sets the focus of screen. Pixel : Adjusts the horizontal feature of screen.

Connect "DVI" devices

What is "Full Native" ?

Full Full Native

Connect a "DVI" device to "HDMI" using "DVI-HDMI" conversion cable. Connect analogue sound output of the DVI device to L and R terminals in HDMI-1.

Set "Audio" in "HDMI Setting" to "Analogue" or "Auto".• HDMI-2 and HDMI-3 input does not support analogue sound (IN HDMI-1).

•

HDMI-2 and HDMI-3 input does not support DVI devices.•

With the full HD LCD display and "Full Native", you can enjoy full native • HD resolution of 1920 x 1080. It exposes ﬂ aws in the video that were hidden when viewing on "Full".

The illustrations are emphasised to make clear differences between

•

"Full" and "Full Native". Dark bar or noise may appear at the edges of the screen when viewing • in "Full native" for some videos. This is resulted from the signal itself, not due to TV malfunction.

Technical information

GGT0359-001A-H-EN.indd 20GGT0359-001A-H-EN.indd 20 19/07/2010 14:10:0819/07/2010 14:10:08

Use "Clear SD"No use "Clear SD"

Eco Sensor

Dark

Light

Technical information (continued)

PC Signals that can be displayed

What is "Clear SD"

What is "Eco Sensor"?

LCD picture is unstable due to a large number of signal noise. Such noise appears extensively especially when an LCD displays SD signals. Clear SD mode resolves disadvantage for better picture quality.

You can adjust this TV so that the screen automatically adjusts to the optimum contrast of light and dark according to the brightness of your room. This function reduces eyestrain and the power consumption of this TV.

Set "Eco Sensor" (P. 15)• Make sure not to block the Eco Sensor on front of the TV (P. 4)• To fully reduce eyestrain and the power consumption of this TV. Set to • the following functions. Eco Sensor : On or Demo (P. 15) Smart Picture : On (P. 11) Using "Demo" in "Eco Sensor", you can display the effect of the "Eco

■

Sensor" on the screen.

If the signal doesn’t appear, check that the vertical frequency on the PC

•

is set to "60Hz".

Resolution 640 x 480(VGA) / 1024 x 768(XGA)

Vertical frequency (Hz) 60.0

Language group for Teletext

Sound and Colour system in your country or region

Group Languages

Group-1 Turkish, Hungarian, English, German, French, Italian, Spanish,

Portuguese, Greek, Swedish, Finnish

Group-2 Polish, Serbian, Croatian, Slovenian, Czech, Slovak, Rumanian,

Hungarian, German, French, Italian, Swedish, Finnish

Group-3 Russian, Bulgarian, Lettish, Lithuanian, Estonian, Ukrainian, Serbian,

Croatian, Slovenian, Czech, Slovak, English, German

Group-4 Arabic, Czech, Slovak, Hungarian, English, German, French, Italian,

Spanish, Portuguese, Swedish, Finnish Group-5 Farsi, English, French, Turkish Group-6 Lettish, Lithuanian, Estonian, Ukrainian, Czech, Slovak, English,

German, Serbian, Croatian, Slovenian

Area Country or Region System System

Asia, Middle East

Bahrain, Kuwait, Oman, Qatar, United Arab Emirates, Yemen, Indonesia, Malaysia, Singapore, Thailand, India, etc.

B/G

PAL China, Vietnam, etc. D/K Hong Kong, etc. I Islamic Republic of Iran, Lebanon, Saudi Arabia, etc. B/G SECAM Philippines, Taiwan, Myanmar, etc. M NTSC

Europe

Russia, etc.

D/K

SECAM Czech Republic, Poland, etc.

PALGermany, Holland, Belgium, etc. B/G UK, etc. I

Oceania Australia, New Zealand, etc. B/G PAL

Africa

Republic of South Africa, etc. I

PAL Nigeria, etc.

B/G

Egypt, Morocco, etc. SECAM

South America

Agentina, Paraguay, Uruguay N

PAL Brazil M

Chile, Peru, Bolivia, Colombia, Venezuela, Ecuador, etc.

M NTSC

If the characters are unreadable. • Select different Teletext language group. (P. 6)

GGT0359-001A-H-EN.indd 21GGT0359-001A-H-EN.indd 21 19/07/2010 14:10:1319/07/2010 14:10:13

Severe noise or snow Page

Check the aerial cable and TV connections . Check the direction of the aerial. Check the aerial or its cable damaged or not.

P. 4 P. 4

Patterns, stripes or noise

Interference caused by devices such as an ampliﬁ er, personal computer, or a hair drier, Move it away from TV.

Ghosting (Doubling of images)

Interference occurs caused by signal reﬂ ection from mountains or building. Try to adjust the aerial’s direction or use another antenna.

Cannot turn it on

Ensure the power cord is connected to the AC outlet correctly. --

Cannot operate the remote control.

The batteries may be exhausted. Replace with new batteries. Ensure that you are operation the remote control at less than 7 meters from the front of your TV.

Remote control stops working

Unplug TV, several minutes later plug it in again. --

Side control buttons do not work

Switch "Child Lock" to "Off". P. 15

Aspect ratio changed unintentionally

Press "

ZOOM

" button to return to your settings.

P. 11

PC screen alignment is off

Adjust the "PC Position" in "PC Setting" of Set Up menu. P. 20

Blue screen appears on the screen

Switch "Blue Back" to "Off". P. 15

Strange picture when using an external device

If the top of the image is distorted, check the video signal quality itself. If movement appears unnatural when receiving a signal from a DVD player, etc. with 625p (progressive-scanning), change the output setting of the external device to 625i (interlace-scanning).

Icon does not appear on the screen when plug USB or SD card into the TV.

Make sure the USB or SD card inserted engaged. Set input signal (See page 16 Article 2) USB or SD card may be damaged.

Poor picture quality Page

Unnatural colour >> Adjust "Colour" and "Backlight" P. 10 Check "Colour System". If "Auto" is selected P. 11 select the speciﬁ c colour system manually. Noise >> Set to the following functions. Picture Mode : Standard P. 10 DigiPure : On P. 11 Dull picture >> Set to the following functions. Picture Mode : Bright P. 10 DigiPure : On P. 11

Poor sound

Adjust the "Bass" and "Treble". If receiving a poor signal in "Stereo/I

■

II" switch to "Mono".

Adjust the channel reception using "Manual".

P. 12 P. 12

P. 7

For HDMI signal, wrong screen size in 480p (525p).

Switch "Size" in "HDMI Setting" to "1" or "2". P. 20

For HDMI signal, green and distorted screen

Wait a little for the signal to stabilize when switching the signal format for an "HDMI" device.

For HDMI signal, No picture / No sound

Use the cable marked with HDMI logo. Check if the device is compliant with HDMI. Switch "Audio" in "HDMI Setting" to "Digital" or "Auto" for HDMI devices, or "Analogue" or "Auto" for DVI devices.

P. 5

P. 20

Some functions do not work.

It is not a malfunction. Some functions (dark background) in the menu do not work depending on the situation.

Black or white dots appear on the screen.

LCD panels use ﬁ ne dots ("pixels") to display images. While more than

99.99% of these pixels function properly, a very small number of pixels may not light, or may light all the time. It is not a malfunction.

No picture, No sound

Some input do not output from OUT terminal. --

Subwoofer, No sound

May be signal source is not low frequency bass signal. Check subwoofer cable connected correctly.

Feedback sound symptoms

Keep the microphone away from the TV’s speakers. --

Echo

Lower the sound level in "Microphone Volume" in order to prevent the echo.

Troubleshooting

If a problem occurs when you are using the TV, check the below troubleshooting guide before calling for repair.

GGT0359-001A-H-EN.indd 22GGT0359-001A-H-EN.indd 22 19/07/2010 14:10:1419/07/2010 14:10:14

CH / CC List

To use the Insert function (P. 7), ﬁ nd the "CH/CC" number corresponding to the TV’s channel number from this table. US: The US channel numbers are the channel numbers used in the United States, Philippines, etc. CCIR: The CCIR channel numbers are the channel numbers used in the Middle East, Southeast Asia, etc. OIRT: The OIRT channel numbers are the channel numbers used in Eastern Europe, Russia, Vietnam, etc. AUSTRALIA: The AUSTRALIA channel numbers are the channel numbers used in Australia, etc.

CC 24 K S-24 CC 25 L S-25 CC 26 M S-26 CC 27 N S-27 CC 28 O S-28 CC 29 P S-29 CC 30 Q S-30 CC 31 R S-31 CC 32 S S-32 CC 33 T S-33 CC 34 U S-34 CC 35 V S-35 CC 36 W S-36 CC 37 W+1 S-37 CC 38 W+2 S-38 CC 39 W+3 S-39 CC 40 W+4 S-40 CC 41 W+5 S-41 CC 42 W+6 CC 43 W+7 CC 44 W+8 CC 45 W+9 CC 46 W+10 CC 47 W+11 CC 48 W+12 CC 49 W+13 CC 50 W+14 CC 51 W+15 CC 52 W+16 CC 53 W+17 CC 54 W+18 CC 55 W+19 CC 56 W+20 CC 57 W+21 CC 58 W+22 CC 59 W+23 CC 60 W+24 CC 61 W+25 CC 62 W+26 CC 63 W+27 CC 64 W+28 CC 75 X CC 76 Y R3 CC 77 Z R4 AU-3 CC 78 Z+1 R5 CC 79 Z+2 AU-4 CC 95 A-5 CC 96 A-4 CC 97 A-3 CC 98 A-2 CC 99 A-1

CH 48 US-48, W+63 E48 CH 49 US-49, W+64 E49 CH 50 US-50, W+65 E50 CH 51 US-51, W+66 E51 CH 52 US-52, W+67 E52 CH 53 US-53, W+68 E53 CH 54 US-54, W+69 E54 CH 55 US-55, W+70 E55 CH 56 US-56, W+71 E56 CH 57 US-57, W+72 E57 CH 58 US-58, W+73 E58 CH 59 US-59, W+74 E59 CH 60 US-60, W+75 E60 CH 61 US-61, W+76 E61 CH 62 US-62, W+77 E62 CH 63 US-63, W+78 E63 CH 64 US-64, W+79 E64 CH 65 US-65, W+80 E65 CH 66 US-66, W+81 E66 CH 67 US-67, W+82 E67 CH 68 US-68, W+83 E68 CH 69 US-69, W+84 E69

Channel

US CCIR OIRT AUSTRALIA

CC 01 S-1 AU-5 CC 02 S-2 CC 03 S-3 CC 04 S-4 CC 05 S-5 CC 06 S-6 AU-5A CC 07 S-7 CC 08 S-8 CC 09 S-9 CC 10 S-10 CC 11 S-11 CC 12 S-12 CC 13 S-13 CC 14 A S-14 CC 15 B S-15 CC 16 C S-16 CC 17 D S-17 CC 18 E S-18 CC 19 F S-19 CC 20 G S-20 CC 21 H S-21 CC 22 I S-22 CC 23 J S-23

Channel

US CCIR OIRT AUSTRALIA

CH 02 US-02 E2 R1 AU-0 CH 03 US-03 E3 AU-1 CH 04 US-04 E4 R2 AU-2 CH 05 US-05 E5 R6 AU-6 CH 06 US-06 E6 R7 AU-7 CH 07 US-07 E7 R8 AU-8 CH 08 US-08 E8 R9 AU-9 CH 09 US-09 E9 CH 10 US-10 E10 R10 AU-10 CH 11 US-11 E11 R11 AU-11 CH 12 US-12 E12 R12 CH 13 US-13 CH 14 US-14, W+29 CH 15 US-15, W+30 CH 16 US-16, W+31 CH 17 US-17, W+32 CH 18 US-18, W+33 CH 19 US-19, W+34 CH 20 US-20, W+35 CH 21 US-21, W+36 E21 CH 22 US-22, W+37 E22 CH 23 US-23, W+38 E23 CH 24 US-24, W+39 E24 CH 25 US-25, W+40 E25 CH 26 US-26, W+41 E26 CH 27 US-27, W+42 E27 CH 28 US-28, W+43 E28 CH 29 US-29, W+44 E29 CH 30 US-30, W+45 E30 CH 31 US-31, W+46 E31 CH 32 US-32, W+47 E32 CH 33 US-33, W+48 E33 CH 34 US-34, W+49 E34 CH 35 US-35, W+50 E35 CH 36 US-36, W+51 E36 CH 37 US-37, W+52 E37 CH 38 US-38, W+53 E38 CH 39 US-39, W+54 E39 CH 40 US-40, W+55 E40 CH 41 US-41, W+56 E41 CH 42 US-42, W+57 E42 CH 43 US-43, W+58 E43 CH 44 US-44, W+59 E44 CH 45 US-45, W+60 E45 CH 46 US-46, W+61 E46 CH 47 US-47, W+62 E47

GGT0359-001A-H-EN.indd 23GGT0359-001A-H-EN.indd 23 19/07/2010 14:10:1519/07/2010 14:10:15

Speciﬁ cation

Main unit Terminals / Connectors

Terminal name Terminal type Signal type (IN)

Signal type (OUT)

Input terminals

VIDEO-1

RCA connectors x 6

Composite video, Analogue component 576i (625i) / 480i (525i), Progressive : 576p (625p) / 480p (525p), HD : 1080i (1125i), 720p (750p) / 1080p (1125p) Audio L / R

VIDEO-2

RCA connectors x 3

Composite video, Audio L / R

HDMI-1

HDMI connector x 1

HDMI 576i (625i) / 480i (525i) / 576p (625p) / 480p (525p), 720p (750p) / 1080p (1125p) / 1080i (1125i)

HDMI-2

HDMI-3

IN HDMI -1

RCA connectors x 2

Audio L/R

PC INPUT

D-SUB (15 pins) x 1

Analogue PC signal

PC AUDIO

PC-IN (3.5 pinjack) x 1

Audio

Microphone

mini-jack x 1 (3.5 mm in diameter)

Microphone input

Output terminals

MONITOR OUT

RCA connectors x 3

Subwoofer, Audio L / R

Model LT-42Z10

Broadcasting systems Area-1 B / G / I / D / K / M

Area-2 M / N

Colour systems Area-1 PAL / SECAM / NTSC 3.58 / NTSC 4.43

Area-2 NTSC / PAL-M / PAL-N

Channels and frequencies

Area-1

VHF low channel (VL) = 46.25 to 140.25 MHz VHF high channel (VH) = 147.25 to 423.25 MHz UHF channel (U) = 431.25 to 863.25 MHz

Area-2

VHF low channel (VL) = 55.25 to 127.25 MHz VHF high channel (VH) = 133.25 to 361.25 MHz UHF channel (U) = 367.25 to 801.25 MHz

Receives cable channels in mid band (X to Z+2, S1 to S10),

super band (S11 to S20) and hyper band (S21 to S41) Sound-multiplex systems NICAM (I / B / G / D / K), A2 (B / G / D / K) Teletext systems FLOF (Fastext), WST (World System Teletext) Power requirements AC 110 V - 240 V, 50/60Hz Audio output

(Rated power output)

10 W + 10 W

Speakers (4 cm x 16 cm) x 2 Power consumption

[standby] ["Rocket Start" mode standby]

167 W

[1 W]

[15W]

Screen size (visible area size measured diagonally)

106.7 cm

Dimensions (W x H x D: mm) [without stand]

1014.8 x 695.4 x 279

[1014.8 x 646.9 x 108.7]

Weights [without stand]

20 kg

[19 kg]

Accessories Power cord x 1

Remote control unit : RM-C2023 x 1

AAA/R03 dry cell battery x 2

Screw x 8

We may change the design and speciﬁ cations without notice.• HDMI, the HDMI Logo, and High-Deﬁ nition Multimedia Interface are • trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries.

GGT0359-001A-H-EN.indd 24GGT0359-001A-H-EN.indd 24 19/07/2010 14:10:1619/07/2010 14:10:16

JVC LT-42Z10 Instructions Manual

Specifications and Main Features

Frequently Asked Questions

User Manual