JVC LVT1248-002A, LS-M1 User Manual

SPEAKER STAND

LS-M1

English

English

INSTRUCTIONS

LVT1248-002A

[US]

Thank you for purchasing a JVC product.
Before you begin using it, please read the instructions carefully.

English

Warnings, Cautions and Others

Warning

Observe the following carefully before installation;
otherwise, the speaker may fall over, causing damage or
injury.

– Do not install the speaker stand on an uneven surface

or in a place subject to vibration.

– Do not lean against the speaker stand. Especially pay

attention to children not to do so.

– Fasten all the screws firmly when assembling the

speaker stand, and check its tightness afterwards
regularly.

– Do not install any overweight equipment (over 10 kg)

on the speaker stand.

7 Checking the supplied parts

Check to be sure you have the following supplied parts.
The quantity of piece supplied is for one pair of speaker stands.

7 Precautions

• For safety use

– Do not climb or hang on to the speaker stand.
– Attach the speaker firmly to the speaker stand.

• For installation

– While installing the speaker on the stand, do not drop it from

the stand. Pay attention not to damage the speaker cabinet.

–To obtain the best bass sound quality, install the speaker

stand on the flat floor.

• For daily use

– Wipe with a dry, soft cloth if the speaker stand should

become dirty. If very dirty, wipe with a cloth applied a small
amount of water or neutral detergent, then wipe with a dry
cloth.

– Do not use chemicals such as benzine and thinner for

cleaning the speaker stand; otherwise, the speaker stand
may deteriorate or its paint may come off.

Top plate --------------------- 2 Bottom plate--------------- 2

Screws ------------------- 6

(Black: M6 x 30 mm) (Black: M6 x 16 mm)

If any item is missing, contact your dealer immediately.

Screws ------------------- 6

Leg ------------------------ 2

(thick)

Screws ------------------- 4

(Silver: M5 x 28 mm)

Leg ------------------------ 4

(thin)

Leg holder ------------------ 6

2