JVC KY-PZ100B-W Users Guide

Page 1

Thank you for purchasing this JVC product. Before operating this unit, please read the instructions carefully to ensure the best possible performance.

In this manual, each model number is described without the last letter (U/E) which means the shipping destination. (U: for USA and Canada, E: for Europe) Only “U” models (KY-PZ100WU/KY-PZ100BU) have been evaluated by UL.

Please read the following before getting started:

For Customer Use:

Model No. Serial No.

Enter below the Serial No. which is located on the body. Retain this information for future reference.

KY-PZ100WU/KY-PZ100BU

HD PTZ REMOTE CAMERA

KY-PZ100WU/KY-PZ100WE KY-PZ100BU/KY-PZ100BE

INSTRUCTIONS

Specifications and appearance of this unit are subject to change for further improvement without prior notice.

About the latest INSTRUCTIONS

Please check the latest INSTRUCTIONS, tools, etc. from the URL below. North America: http://pro.jvc.com/prof/main.jsp Europe: http://www.service.jvcpro.eu/public/ China: http://www.jvc.com.cn/service/download/index.html

IM 1.00

B5A-1715-00

Page 2

Page 3

Read these instructions.

Keep these instructions.

IMPORTANT SAFEGUARDS

These are general IMPORTANT SAFEGUARDS and certain items may not apply to all appliances.

FOR USA

10.

11.

12.

13.

For USA-California Only

This product contains a CR Coin Cell Lithium Battery which contains Perchlorate Material – special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate

CAN ICES-3 A / NMB-3 A

Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with dry cloth. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. Only use attachments/accessories specified by the manufacturer. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. Unplug this apparatus during lightning storms or when unused for long periods of time. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

Getting Started

IMPORTANT SAFEGUARDS

Page 4

Safety Precautions

CAUTION

FOR USA AND CANADA

CAUTION:

TO REDUCE THE RISK OF ELECTRIC SHOCK. DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

The lightning flash with arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

RISK OF ELECTRIC

SHOCK

DO NOT OPEN

This device complies with Part 15 of FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Changes or modifications not approved by JVC could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.

Getting Started

Safety Precautions

Page 5

POUR CANADA

RISQUE

D’ELECTROCUTION

NE PAS OUVRIR

CAUTION:

The mains plug shall remain readily operable.

 Remove the mains plug immediately if

the camera functions abnormally.

WARNING:

The remote control with battery installed should not be exposed to excessive heat such as direct sunlight, fire or the like.

ATTENTION:

POUR EVITER TOUT RISQUE D’ELECTROCUTION NE PAS OUVRIR LE BOITER. AUCUNE PIECE INTERIEURE N’EST A REGLER PAR L’UTILISATEUR. SE REFERER A UN AGENT QUALIFIE EN CAS DE PROBLEME.

ATTENTION

Le symbole de l’éclair à l’intérieur d’un triangle équilatéral est destiné à alerter l’utilisateur sur la présence d’une “tension dangereuse” non isolée dans le boîtier du produit. Cette tension est suffisante pour provoquer l’électrocution de personnes.

Le point d’exclamation à l’intérieur d’un triangle équilatéral est destiné à alerter l’utilisateur sur la présence d’opérations d’entretien importantes au sujet desquelles des renseignements se trouvent dans le manuel d’instructions.

Ces symboles ne sont utilisés qu’aux Etats-Unis.

WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE.

AVERTISSEMENT : POUR EVITER LES RISQUES D’INCENDIE OU D’ELECTROCUTION, NE PAS EXPOSER L’APPAREIL A LA PLUIE NI A L’HUMIDITE.

NOTES:

 The rating plate and safety caution are

on the bottom and/or the back of the main unit.

 The serial number plate is on the

bottom of the unit.

 The rating information and safety

caution of the AC adapter are on its upper and lower sides.

REMARQUES :

 La plaque d’identification et

l’avertissement de sécurité se trouvent sous l’appareil et/ou au dos.

 La plaque du numéro de série est

située sur la partie inférieure de l’appareil.

 Les informations d’identification et

l’avertissement de sécurité de l’adaptateur secteur sont situés sur ses côtés supérieur et inférieur.

Caution on Replaceable lithium battery

The battery used in this device may present a fire or chemical burn hazard if mistreated. Do not recharge, disassemble, heat above 100°C (212°F) or incinerate. Replace battery with Panasonic, Sanyo, Sony or Maxell CR2025. Danger of explosion or risk of fire if the battery is incorrectly replaced.

 Dispose of used battery promptly.  Keep away from children.  Do not disassemble and do not dispose

of in fire.

Getting Started

Safety Precautions

Page 6

When the equipment is installed in a cabinet or on a shelf, make sure that it has sufficient space on all sides to allow for ventilation (10 cm (3-15/16") or more on both sides, on top and at the rear). Do not block the ventilation holes. (If the ventilation holes are blocked by a newspaper, or cloth etc. the heat may not be able to get out.) No naked flame sources, such as lighted candles, should be placed on the apparatus. When discarding batteries, environmental problems must be considered and the local rules or laws governing the disposal of these batteries must be followed strictly.

The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the apparatus.

Do not point the lens directly into the sun. This can cause eye injuries, as well as lead to the malfunctioning of internal circuitry. There is also a risk of fire or electric shock.

CAUTION!

Connecting cables (Audio/Video, etc.) to this unit and leaving it on top of the TV is not recommended, as tripping on the cables will cause the unit to fall, resulting in damage.

When using the AC adapter in areas other than the USA

The provided AC adapter features automatic voltage selection in the AC range from 110 V to 240 V.

USING HOUSEHOLD AC PLUG ADAPTER

In case of connecting the unit’s power cord to an AC wall outlet other than American National Standard C73 series type, use an AC plug adapter called a “Siemens Plug” as shown. For this AC plug adapter, please contact the local dealers in your area.

 Remove the AC adapter from the AC

wall outlet when not in use.

 Do not leave dust or metal objects

adhered to the AC wall outlet or AC adapter (power/DC plug).

Plug Adapter

Getting Started

Safety Precautions

Page 7

IMPORTANT (for owners in the U.K.) Connection to the mains supply in the United Kingdom. DO NOT cut off the mains plug from this equipment.

If the plug fitted is not suitable for the power points in your home or the cable is too short to reach a power point, then obtain an appropriate safety approved extension lead or contact the local dealers in your area.

BE SURE to replace the fuse only with

an identical approved type, as originally fitted, and to replace the fuse cover. If nonetheless the mains plug is cut off be sure to remove the fuse and dispose of the plug immediately, to avoid possible shock hazard by inadvertent connection to the mains supply. If this product is not supplied fitted with a mains plug then follow the instructions given below:

DO NOT make any connection to the

Larger Terminal coded E or Green. The wires in the mains lead are coloured in accordance with the following code:

If these colours do not correspond with the terminal identifications of your plug, connect as follows: Blue wire to terminal coded N (Neutral) or coloured black. Brown wire to terminal coded L (Live) or coloured Red. If in doubt — consult a competent electrician.

CAUTIONS:



To prevent shock, do not open the cabinet. No user serviceable parts inside. Refer servicing to qualified personnel.

 When you are not using the AC

adapter for a long period of time, it is recommended that you disconnect the power cord from AC outlet.

Blue to N (Neutral) or Black Brown to L (Live) or Red

FOR EUROPE

This equipment is in conformity with the provisions and protection requirements of the corresponding European Directives. This equipment is designed for professional video appliances and can be used in the following environments:

 Controlled EMC environment (for

example, purpose-built broadcasting or recording studio), and rural outdoors

environments. In order to keep the best performance and furthermore for electromagnetic compatibility we recommend to use cables not exceeding the following lengths:

The inrush current of this apparatus is

4.5 A.

Exclusive Cable

Shielded Cable

LAN Cable

Coaxial Cable

LAN Cable

DC 1.8 m

2.5 m

3 m

2 m

4.5 m

2 m

LAN

HDMI

SDI

AUDIO

RS-232C IN/OUT

RS-422

Port Cable Length

CAUTION:

Where there are strong electromagnetic waves or magnetism, for example near a radio or TV transmitter, transformer, motor, etc., the picture and the sound may be disturbed. In such case, please keep the apparatus away from the sources of the disturbance.

Getting Started

Safety Precautions

Page 8

WARNING

This is a Class A product. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures.

CAUTION:

To avoid electric shock or damage to the unit, first firmly insert the small end of the power cord into the AC Adapter until it is no longer wobbly, and then plug the larger end of the power cord in to an AC outlet.

FOR EUROPE

The plastics packaging bags may cause suffocation when they are covered over the head. Tear them open, and keep them away from the reach of infants and children by ensuring that they are disposed of properly.

Dear Customer

This apparatus is in conformance with the valid European directives and standards regarding electromagnetic compatibility and electrical safety. European representative of JVC KENWOOD Corporation is: JVC Technical Services Europe GmbH Konrad-Adenauer-Allee 1-11 61118 Bad Vilbel GERMANY

Sehr geehrter Kunde, sehr geehrte Kundin, dieses Gerät stimmt mit den gültigen europäischen Richtlinien und Normen bezüglich elektromagnetischer Verträglichkeit und elektrischer Sicherheit überein. Die europäische Vertretung für die JVC KENWOOD Corporation ist: JVC Technical Services Europe GmbH Konrad-Adenauer-Allee 1-11 61118 Bad Vilbel DEUTSCHLAND

Para Brasil

Informação sobre eliminação de baterias

Este produto não deverá ser eliminado como lixo doméstico em geral. Devolva a bateria velha ao comerciante ou para a rede autorizada, para que seja devolvida ao fabricante ou importador. A reciclagem e eliminação de lixo em uma maneira adequada, ajudarão para preservar recursos, prevenindo, ao mesmo tempo, contra efeitos prejudiciais sobre a nossa saúde e o meio ambiente.

Getting Started

Para Retirar a Bateria Recarregável

Pressione botão e puxe a bateria para fora.

Safety Precautions

Page 9

󱂕ḏ䌰὞ἀ䒩㚠旑

󱂕ḏḨ⑂ᶮ䘅㚊⬴䇪岩

恩ṷ⎎䥱

㚊⬴䇪岩

摆

澐Qc澑㯟澐Ih澑

擊

澐De澑

󱂏Ṹ摭

澐Ds)WJ*澑

⢛㸵俕剰

)QCC*

⢛㸵ḍ剰愛

澐QCEF澑

乀嵰㜀久ṷ

ȵȵ  ȵ ȵ

㚻䬲 ȵȵ  ȵ ȵ ⃊⫧䱼习

ḥ㳂廭㋣◩ 󱂘ṗ旅ṷ

ȵȵ  ȵ ȵ ȵȵ  ȵ ȵ

ȵȵ  ȵ ȵ



䌰὞ἀ䒩㚠旑

㫥♿㞈埩䢻ḇᶮ⋏ḻ㮒󱂓␍♾䘅㱖⼌㇁奅⬛䘅䌰὞ἀ䒩㚠旑ɝ⍫ 夂䒩ㆸ⚩ἀ䒩㚭Ḩ⑂㕷忶⬉㱩ゐḌ柺ᶮ䘅⎅柺奅⬛澔ṏ↷御㕦㚠⺁⥌↱㫥♿㞈㞈ⅻ䘅㚠旑ᶻ㫣澐䌰὞ἀ䒩㚠旑澑㕣ᶎẛ㯢㝔䌰⠄ 󰶁ᶎẛḨ䒠⭺ḻỔ㚊⬴䘅䇪岩ɝ 旅ṷ␍㴉侘⾨晷ṷ䘅䌰὞ἀ䒩㚠旑⤃ᶌ㇁䢻澢澐ᶎ⎍Ḩ⑂ᶮ⊆⎬䘅旅ṷ␍㴉侘⾨晷ṷ󰶁ᶎ䙹⎍ɝ澑忦㌨◩ɜḥ㳂廭㋣◩ɜ䒶亇䯼澢21ⷵ

㚭埩㞽἞㋯!TK0U22475!䘅奅⬛亗↷ɝ ȵ澢埩䢻学㚊⬴䇪岩⚩学恩ṷ㇁㚊⛈岩㛑㔚ᶮ䘅⎬慐⛈⚩

HC0U37683!奅⬛䘅 !!!!旑慐夂㯃Ṧᶌɝ 澢埩䢻学㚊⬴䇪岩兴⮒⚩学恩ṷ䘅㝑ᶁ⛈岩㛑㔚ᶮ䘅⎬慐崆ⅻ

HC0U37683

!!!!奅⬛䘅旑慐夂㯃ɝ

For KY-PZ100WE, KY-PZ-100BE GB4943.1-2011 GB9254-2008 GB17625.1-2012

Getting Started

Safety Precautions

Page 10

Consult your dealer as special technique is required the fixing screws or nuts are tightened securely, otherwise, the unit may fall off.

Mounting to a firm place

Getting Started

As the unit contain parts rotating at high speed, mount it on a firm place with sufficient strength to support the vibration and weight of the unit. Mass : Approx. 2.0 kg If the strength is weak, the vibration will cause fuzzy images on the monitor screen. In the worst scenario, the camera may even fall off and hit somebody, resulting in serious accidents.

Mount the camera correctly

When to use a ceiling mounting bracket. Be sure to connect the fall prevention wire and tighten the fixing screws or nuts securely.

Using the correct power and voltage

To supply power to this unit, use a DC 12 V or PoE+ (IEEE802.3at Type2) power. Make use of the correct voltage. Use the supplied AC adapter for the DC 12 V power supply. Do not use the supplied AC adapter on other devices.

Inspect the unit regularly

Screws may be loosened due to vibration or deterioration of the mounting section. Perform regular inspections for loosened screws and check whether there is any danger of the unit falling off.

when installing this product. Ensure that

mounting the unit to the ceiling, make sure

Do not hang on this product, shake it, or hang objects over it. Applying an excessive load may cause the product to fall off and result in accidents.

Do not modify this product. It may result in accidents.

Do not place any object inside the product. Placing a metallic or inflammable object may cause a fire or shock hazard.

Safety Precautions

Page 11

Getting Started

Safety Precautions

Contents .......................................................... 11

Main Features ................................................. 13

Precautions ..................................................... 14

Operation Modes ............................................. 18

Names of Parts ................................................ 20

DIP Switch Setting ........................................... 23

Tally Lamp ....................................................... 25

View Remote (Live View) Screen and External

Monitor Connection Display ............................ 26

About microSD Cards ...................................... 27

Compatible microSD Cards ......................... 27

Formatting (Initializing) microSD Cards ....... 28

Restoring the microSD Card ........................ 28

Clips Recorded to microSD Cards ............... 29

Installation/Connection

Mounting the Camera to the Ceiling Mount

Bracket ............................................................ 30

Installing the Camera on the Ceiling ................ 31

Installing the Camera on a Desktop ................. 32

Attaching the Camera to a Tripod .................... 32

Connecting the Cables .................................... 33

IP Address Settings ......................................... 34

Using the IP Setting Tool ............................. 34

Configuring IP Address Manually ................. 35

Confirming the Connection .............................. 35

Using View Remote

View Remote Screen ....................................... 36

Shooting

Basic Shooting Procedures ............................. 38

Selecting Video Recording Resolution, Frame

Rate and Bit Rate ............................................ 38

Preset Mode .................................................... 39

Pan/Tilt Operation ........................................... 40

Zoom Operation .............................................. 40

Focus Operation .............................................. 41

Adjusting the Brightness .................................. 41

Adjusting the Iris .............................................. 42

Setting the Gain ............................................... 43

Setting the Electronic Shutter .......................... 44

Adjusting the White Balance ............................ 45

Adjusting the Camera Image ........................... 46

Using the Image Stabilizer ............................... 46

Audio Recording .............................................. 47

Time Code and User’s Bit ................................ 47

............................................ 4

Setting Time Code Generator .......................... 48

Setting the User’s Bit .......................................

Loop Recording ............................................... 51

Menu Display and Detailed Settings

Basic Operations in Menu Screen ................... 52

Display and Description of the Menu Screen

..................................................................... 52

Text Input with Software Keyboard .............. 53

Menu Screen Hierarchical Chart ..................... 54

Camera Function Menu ................................... 55

Camera Process Menu .................................... 56

Pan/Tilt Menu .................................................. 57

TC/UB Menu ................................................... 58

A/V Set Menu .................................................. 59

Video Set Item ............................................. 59

Audio Set Item ............................................. 59

Network Menu ................................................. 60

System Menu .................................................. 65

Record Set Item ........................................... 67

Display/Status Screen

Display Screen in Camera Mode ..................... 69

Status Screen .................................................. 72

Connecting External Devices

Connecting External Monitor ........................... 73

Connecting to the Network

Functions of Network Connection .................... 74

Network Connection ........................................ 74

Operating Environment ................................ 74

Connecting to Network via [LAN] Terminal .. 75

Connecting to Network via [USB] Terminal .. 75

Connecting via Wireless LAN (USB) ............ 76

Connecting via Ethernet Adapter (USB) ...... 77

Connecting via Cellular Adapter (USB) ........ 78

Importing Metadata ......................................... 78

Preparing Metadata ..................................... 78

Configuring the Server for Downloading ...... 79

Importing Metadata ...................................... 79

Editing Metadata ............................................. 80

Planning Metadata ....................................... 80

Clip Metadata .............................................. 81

Uploading a Recorded Video Clip ................... 83

Deleting Recorded Clips .................................. 85

Changing Settings ........................................... 87

Changing Common LAN/USB Connection

Settings ........................................................ 88

Changing LAN Connection Settings ............ 88

Changing USB Connection Settings ............ 89

Changing Metadata Server Settings ............ 90

Getting Started

Contents

Page 12

Changing Clip Server Settings ..................... 91

Changing Live Streaming Settings

Managing the Network Connection Settings File

......................................................................... 93

Saving the Connection Settings File ............ 94

Reading the Connection Settings File .......... 95

Getting Started

Deleting Connection Settings ...................... 95

Loading and Saving Setup Files ...................... 96

Performing Live Streaming .............................. 97

Setting Distribution ....................................... 97

Starting Distribution ..................................... 99

Setting the FEC Matrix ............................... 100

............... 92

Others

Error Messages and Actions ......................... 101

List of FTP Transfer Errors ......................... 101

List of Live Streaming Error Displays ......... 103

Blinking of the Tally Lamp .......................... 104

Troubleshooting ............................................ 105

Specifications ................................................ 107

Software License Agreement ........................ 110

Important Notice concerning the Software ..... 112

Index ............................................................. 113

Content of this Manual

Symbols used

Caution :

Memo : Describes reference information,

Content of this manual

Illustrated designs, specifications and other contents for improvement without prior notice.

microSDXC and microSDHC logos are trademarks of SD-3C and LLC.

HDMI (High-Definition Multimedia Interface) and 1 are trademarks of HDMI Licensing, LLC.

QuickTime, Mac OS and Safari are trademarks of Apple Inc. registered in the U.S. and other countries.

Google Chrome is a trademark and/or registered trademark of Google Inc.

Microsoft and Windows are registered trademarks of Microsoft Corporation in the United States and other countries.

The company name of Fontworks, Fontworks, and the name of the fonts are registered trademarks of Fontworks Inc.

Zixi and the Zixi logo are trademarks of Zixi LCC.

Other product and company names included in this instruction manual are trademarks and/ or registered trademarks of their respective companies. Marks such as ™ and ® have been omitted in this manual.

Describes precautions concerning the operation of this product.

such as functions and usage restrictions of this product.

: Indicates the reference page

numbers and reference items.

of this manual, in whole or in part, is

of this manual are subject to change

Contents

Page 13

Main Features

Enhanced network functions

In addition to the LAN terminal, you can also attach a USB adapter that supports wireless network connection to enable communication such as live streaming network in a wireless environment. Not only does this product support the “Zixi” cloud

service, which enables highly-reliable and stable data transmission, live streaming such as via “SMPTE 2022-1” is also possible.

The LAN terminal supports a high bit rate setting, which allows for live streaming in higher definition.

Supports simultaneous output of 1080/60p SDI, HDMI and live streaming

This product comes with a [3G-SDI] and a [HDMI] digital

output of SDI, HDMI and even live streaming videos and audio files.

Silent PTZ (pan/tilt/zoom) operation

In order for this product to handle different scenes and uses that are required of a remote-controlled camera, makes use of our in-house mechanical technology to achieve both excellent positional accuracy as well as silent operation.

Highly precise in recalling preset positions

Boasts a maximum panning speed of 480°/second (90°/second during preset and manual) and a maximum tilt speed of 300°/second (90°/second during recalls a preset position that has been registered very quickly and accurately. It is also able to store up to 100 preset positions for each camera.

and remote control by connecting to the

output terminal, which enable simultaneous

we incorporated a direct drive system that

preset and manual), while at the same time

1/2.8-inch high-performance CMOS sensor

This product is equipped with a 1/2.8-inch highperformance CMOS sensor with an effective resolution of approximately 2.13 megapixels.

delivers high-quality Full HD video images with a

It low level of noise.

30x optical zoom lens

The camera comes with a 30x optical zoom lens that

is able to handle shoots at huge locations such

as in a hall or conference center.

High-quality in-camera recording (microSD)

You can record video images on the camera using a

microSD card. It also has a loop recording feature that continues to record the audio sound and video images for a certain period of time. Recorded videos can also be sent via FTP transfer over the network.

Equipped with an audio input terminal

This product is equipped with a [AUDIO IN] terminal. Monaural or stereo audio recording is

also possible when a microphone is connected.

Comes with ceiling mounting bracket and infrared remote controller

Supports different types of remote protocols

This product supports IP (Standard/D star) and RS-232C/RS-422 (Standard/D star).

Getting Started

Compatible with PoE+ power supply for each installation

This product supports PoE+ (Power over Ethernet Plus), which enables power supply as well as camera control and live streaming through the network simply via a LAN cable connection. It

also eases installation of the camera at locations

where mounting is difficult, such as a ceiling.

Main Features

Page 14

Precautions

Installation Location

Be sure to install the camera horizontally.

Getting Started

Storage and Usage Locations

Allowable ambient temperature and humidity Be sure to use this unit within the allowable temperature range of 0 °C to 40 °C (32 °F to 104°F) and a relative humidity of 30 % to 80 %. Using this unit at a temperature or humidity outside the allowable ranges could result not only in malfunction but also serious impact on the CMOS elements as small white spots may be generated. Please exercise care during use.

Strong electromagnetic waves or magnetism Noise may appear in the picture or audio and/or the colors may be incorrect if this unit is used near a radio or television transmitting antenna, in places where strong magnetic fields are generated by transformers, motors, etc., or near devices emitting radio waves, such as transceivers or cellular phones.

Use of wireless microphone near this unit When a wireless microphone or wireless microphone tuner is used near this unit during recording, the tuner could pick up noise.

Inadequate heat ventilation may result in malfunction of this product. Be sure not to block vents around the product. This product discharges heat from the surface of the main unit.

Do not install it at locations directly subjected to cold air such as near the vents of air-conditioners or at locations with high temperature.

Avoid using or placing this unit in the following places.

Locations beyond the allowable operating humidity range of 30 %RH to 80 %RH. (Condensation is not allowed)

Near equipment that emits strong magnetic fields, such as transformers or motors.

Near equipment that emits radio waves, such as transceivers and mobile phones.

Locations with excessive dust and sand.

Locations that are subject to vibration such as inside the car or ship.

Locations prone to moisture such as window side.

Locations subject to steam or oil, such as kitchens.

Special environment, such as those with combustible atmosphere.

Locations that are subjected to radiation, Xrays, salt attack or corrosive gases.

Locations where chemicals are used such as swimming pools.

Hot or cold places that are beyond the allowable ambient operating temperature range.

Transportation

Do not throw away the original box of the unit. Keep it and use it for transporting the unit in future.

The camera unit is designed to be rotated easily, secure the camera unit such that it does not rotate before transporting. Otherwise, an error may occur during camera operation.

Face the lens upward, and secure the lens unit and the camera head with tape.

Secure the camera head and the base at multiple positions with tape.

Carrying the Camera

Do not drop or hit this unit against a hard object when transporting.

Remove the connecting cables when transporting the unit.

When transporting the unit, turn off the power of the system.

Pack the unit with cushioning material so as to avoid shock when transporting.

Handle the unit with care and do not subject it to vibration or shock.

Power Saving

If the camera is not to be used for a long time, turn off the power of the system for safety and energy conservation reasons.

Maintenance

Turn off the power before performing any maintenance.

Wipe the external cabinet of the unit with a soft cloth. Do not wipe the body with benzene or thinner. Doing so may cause the surface to melt or turn cloudy. When it is extremely dirty, soak the cloth in a solution of neutral detergent, wipe the body with it, and then use a clean cloth to remove the detergent.

Precautions

Page 15

microSDHC/microSDXC Cards

“microSDHC/microSDXC card” is referred to as “microSD card” in this manual.

This camera recorder saves the recorded images and audio sound to the microSD card (sold separately) that is inserted into the card slot.

If the microSD card contains files recorded by devices other than this camera recorder or files that are saved from a PC, the recordable time may be shorter or data may not be properly recorded. In addition, the remaining space on the card may not increase even when files are deleted using a PC.

* Using cards other than those from Panasonic,

TOSHIBA or SanDisk may result in recording failure or data loss.

Handling of microSD Cards

Do not remove the microSD card during data access (such as recording or formatting). And, do not turn off the power or remove the AC adapter during access.

Do not use or store the microSD card in a place that is subject to static electricity or electrical noise.

Do not place the microSD card near locations that are exposed to strong magnetic fields or radio waves.

Inserting the microSD card incorrectly may result in damage of this unit or the microSD card.

We are not liable for any accidental loss of data stored on the microSD card. Please back up any important data.

Make use of the microSD card within the prescribed conditions of use. Do not use it at the following locations. Places that are subject to direct sunlight, high humidity or corrosion, places near thermal equipment, sandy or dusty places, or in a car under the sun with the doors and windows closed.

Do not bend or drop the microSD card, or subject it to strong impact or vibration.

Do not splash the microSD card with water.

Do not dismantle or modify the microSD card.

Do not touch the terminals with your hands or with a metal object.

Do not allow dust, dirt, water, or foreign objects to adhere to the terminals.

Do not stick any label or sticker.

Do not use a pencil or ballpoint pen to write on the microSD card. Always use oil-based pens.

If you format (initialize) the microSD card, all data recorded on the card, including video data and setup files, will be deleted.

You are recommended to use cards that are formatted (initialized) on this camera recorder.

The microSD card may be damaged if the camera recorder is not functioning correctly. Formatting (Initializing) the microSD may allow it to operate correctly.

microSD cards that have been formatted (initialized) on another camera, computer or peripheral equipment may not function correctly. In this case, format (initialize) the microSD card on this camera recorder.

If you want to discard the microSD card by completely erasing the data inside, we recommend either using commercially available software that is specially designed for that purpose or physically destroying the microSD card with a hammer, etc. When formatting or erasing data using the camera recorder, only the file administration information is changed. The data is not completely erased from the microSD card.

The microSD card may pop out when it is being ejected from the slot. Be careful not to lose the card.

Getting Started

Precautions

Page 16

Encryption in Network Connection

Wireless LAN connections make use of an encryption function. This encryption is designed for commercially-sold equipment, and it cannot be altered.

Getting Started

License Notices

MPEG LA AVC THIS PRODUCT IS LICENSED UNDER THE AVC PATENT PORTFOLIO LICENSE FOR THE PERSONAL USE OF A CONSUMER OR OTHER USES IN WHICH IT DOES NOT RECEIVE REMUNERATION TO (i) ENCODE VIDEO IN COMPLIANCE WITH THE AVC STANDARD (“AVC VIDEO”) AND/OR (ii) DECODE AVC VIDEO THAT WAS ENCODED BY A CONSUMER ENGAGED IN A PERSONAL ACTIVITY AND/OR WAS OBTAINED FROM A VIDEO PROVIDER LICENSED TO PROVIDE AVC VIDEO. NO LICENSE IS GRANTED OR SHALL BE IMPLIED FOR ANY OTHER USE. ADDITIONAL INFORMATION MAY BE OBTAINED FROM MPEG LA, L.L.C. SEE

HTTP://WWW.MPEGLA.COM

Any recordings made on this camera recorder that are played back for profit or public preview may infringe on the rights of the owner of the recordings. Do not use the recordings for purpose other than personal enjoyment without prior consent from the owner.

The default password is widely known. It is very dangerous to use the password without changing it. Set a password that is not easily guessed. It is also recommended to change the password regularly.

Others

This camera will perform the initial operation of pan/tilt/zoom upon powering on.

The camera body may be captured in the recording depending on the pan, tilt or zoom position.

Do not subject the lens to strong light source such as sun rays. This may cause the equipment to malfunction.

During audio input/output, noise may occur when the rotation mechanism is rotated horizontally/ vertically, when zooming is performed or when the power is turned on/off. This is not a malfunction.

The pan operation range of this product is limited to ±175°. Regardless of the function, operation is not possible beyond this range.

Some switching hubs of products that are equipped with intelligent features may include a broadcast/multicast suppression function. Viewing of multicast images on this product may fail if this function is enabled.

The dark areas on the screen may appear grainy or white spots may increase. When switching between color and black-and-white images, the brighter area on the screen is emphasized, which may reduce the visibility. However, this is not a malfunction.

If the power supply voltage is momentarily cut off or reduced due to lightning or turning on of the air conditioner’s power, the image may be disrupted or noise interference may occur.

When shooting objects with a luminance difference or near a light source, ghost may occur on the screen. This is a feature of the built-in lens, and is not a malfunction.

The time of the internal clock may be significantly out of alignment if the power of the product is turned off for a long time or when there is prolonged power failure. If this occurs, readjust the clock time.

When the monitor in use has a wide display area, lines may appear at the peripheral area of the screen.

Operation via an infrared remote control unit may not work depending on where and how the camera is installed.

Precautions

Page 17

An afterimage can appear if you view a moving object on the monitor output, however this is not a malfunction.

Do not insert objects other than the memory card into the card slot.

Do not put anything into the camera unit. Metal and flammable items entering from the connectors can result in fire or electric shock.

Do not turn On/Off the power or remove the supplied AC adapter during recording.

The camera recorder may not show stable pictures for a few seconds immediately after the power is turned on, but this is not a malfunction.

Do not drop this unit or subject it to strong impact or vibration as it is a precision equipment.

Optical performance of lens Due to the optical performance of the lens, color divergence phenomena (magnification chromatic aberration) may occur at the periphery of the image. This is not a camera malfunction.

Noise may appear in the image when switching modes.

Use the supplied AC adapter for the power supply (DC 12 V). Do not use the supplied AC adapter on other devices.

This camera recorder makes use of fonts by Fontworks Inc.

This camera recorder makes use of M+FONTS.

Before starting an important recording, be sure to perform a test recording in order to confirm that a normal recording is possible.

We shall not be liable for the loss of recordings or opportunities in the event that recording could not be performed due to a problem that arises during the use of the video camera or recorder.

Getting Started

Precautions

Page 18

Operation Modes

FTP in Progress

Exit FTP Operation

Press the [Action] button on the Clip List screen to upload

File Deletion in

Progress

File deletion complete

Press the [Action] button on the Clip List screen to delete

Camera Input

Press the [Live View/Setting Screen Toggle] button to switch to the setting screen, followed by selecting “Maintenance”

Press the [Live View/Setting Screen Toggle] button to switch to the Live View screen

Press the [Live View/Setting Screen Toggle] button to switch to the setting screen, followed by selecting “Clip List”

Press the [Live View/Setting Screen Toggle] button to switch to the Live View screen

Set “Video” to “Off” on the Live View screen

Set “Video” to “On” on the “Clip List” screen

Video Off Mode

Camera Mode

(Live View Screen)

Remote Edit Mode

(Clip List Screen)

Maintenance Mode

This camera has four operation modes - Camera mode, Remote Edit mode, Maintenance mode and Video Off mode.

Getting Started

Operation Modes

Page 19

Operation Mode Description

Camera Mode

Remote Edit Mode

Maintenance Mode

Video Off Mode

is the camera shooting mode. The camera recorder starts up in Camera mode

This when the power is turned on.

Video images from the camera are output to a browser (Live View) screen or an externally connected monitor. When a recordable microSD card is inserted, the camera recorder enters the recording standby mode.

Press the [REC] button to start recording.

Memo :

When shifting from the Video Off mode to the camera mode, it may take a while for the camera to complete the initial operation and output the video images.

This mode enables the list display and editing of the recorded clip data through access to the clip list display page via a web browser on a PC.

you access via a web browser on a PC, “It is necessary to change the camera

When mode to "Remote Edit Mode". Change the mode.” appears on the web browser. At the same time, “Change to Remote Edit Mode?” appears on the screen of the device that is connected to the video output terminal.

Selecting [Change] switches to the Remote Edit mode, and enables display of the clip list and editing of the clip metadata.

P81 [ Clip Metadata ] )

(A P83 [Uploading a Recorded Video Clip] )

Memo :

If you access via the web browser of a PC while recording is in progress, the message appears after recording stops.

This is a mode for running Load or Store with respect to firmware update or the setup file.

Stops output from the video output terminal. (Black screen display)

Memo :

This mode is only available when operating from a web browser screen.

Upon shifting to this mode, all card recording, live streaming and Live View operations will stop.

This mode indicates that operation is stopped.

Stops output from the video output terminal. (Black screen display)

Memo :

Upon shifting to this mode, all card recording, live streaming and Live View operations will stop.

Getting Started

Operation Modes

Page 20

Names of Parts

E F

A B

Getting Started

Bottom Section

Camera head

Rotates horizontally.

Lens section

Rotates vertically.

Tally lamp

Turns on/off according to the menu setting and blinks depending on the status of this camera.

25 [Tally Lamp] )

(A P (A P66 [ Tally Lamp ] )

Infrared remote control sensor

POWER lamp

Lights up as follows depending on the status of

Tripod socket hole

For attaching the tripod.

Fall prevention wire mounting hole

Ceiling mount bracket guide slot

DIP switch

Use the DIP switch to configure various settings.

23 [DIP Switch Setting] )

(A P

Rating label

Ceiling mount bracket fixing screw hole

Ceiling mount bracket

this camera.

Lights up

: When Video is “Off” in red Lights up

: When Video is “On” in green

Base

Fall prevention wire (for ceiling) mounting hole

Fall

prevention wire (for camera) mounting hole

“FRONT” mark

Names of Parts

Page 21

Terminal Section

A B

13275

468

543

678

Anti-theft wire mounting hole

[LAN(PoE+)] LAN (PoE+) terminal

For connecting the LAN cable.

microSD card slot

For inserting the microSD card.

27 [Compatible microSD Cards] )

(A P

Reset switch

Short press : Restores the video output

Press and hold : Restores all items in the

*1 Applies

to [HDMI/SDI Out] and [Resolution] in

the Video Set menu, [Frame Rate] in the Network menu, [System Mode] in the [System] menu, and [Frame Rate] and [Bit Rate] in the Record Set menu.

(A P59 [ HDMI/SDI Out ] ) (A P59 [ Resolution ] ) (A P62 [ Frame Rate ] ) (A P65 [ System Mode ] ) (A P67 [ Frame Rate ] ) (A P67 [ Bit Rate ] )

*2 Works in the same way as [Reset Network

Settings]. The power lamp blinks in blue while reset is in progress.

(A P64 [ Reset Network Settings ] )

[DC 12V] DC input terminal

For connecting the supplied AC adapter to supply DC 12 V.

Cable clamp hole

HDMI cable fixing hole

setting to the default setting and restarts the camera. (*1)

[Network] menu to their default settings. (*2)

[HDMI] HDMI terminal

Output terminal for HDMI video and audio signals.

[AUDIO IN

] AUDIO input terminal

For connecting the stereo mini plug.

[RS-422] RS-422 terminal

Getting Started

For connecting the RS-422 cable.

Number

Signal Name

Number

Signal

Name 1 GND 5 TXD+ 2 TALLY 6 RXD+ 3 RXD- 7 4 TXD- 8 -

[USB]

USB terminal

For connecting a network device.

[SDI OUT] SDI output terminal

Output terminal for SDI video and audio signals.

Infrared remote control sensor

[RS-232C IN/OUT] RS-232C input/output terminal

For connecting the RS-232C cable. [RS-232C IN]: Input terminal for RS-232C

remote (Mini DIN 8-pin) [RS-232C OUT]: Output terminal for RS-232C

remote (Mini DIN 8-pin)

RS-232C IN RS-232C OUT

Number

Signal Name

Number

Signal Name

1 DTR_IN 1 DTR_OUT 2 DSR_IN 2 DSR_OUT 3 TXD_IN 3 TXD_OUT 4 GND 4 GND 5 RXD_IN 5 RXD_OUT 6 GND 6 GND 7 IR_OUT 7 NC 8 IR_OUT 8 NC

Names of Parts

Page 22

+ mark

Getting Started

Infrared Remote Control

Zoom button

Pressing the button at the T end moves the zoom lens toward the telephoto range and the angle of view becomes narrower. Pressing the button at the W end moves the zoom lens toward the wide-angle range and the angle of view becomes wider.

AF button

Sets the camera to the Auto Focus mode.

Pan/Tilt, Menu operation button

Moves the display area. Moves the cursor when the menu is displayed.

SET button

Restores the display area to the default position. Functions as a confirmation button when the menu is displayed.

MF, Cancel button

Sets the camera to the Manual Focus mode. Functions as a cancel button when the menu is displayed.

FAST button

Sets pan/tilt and zoom to high speed.

Short press Press and hold:Maximum speed mode

SLOW button

Sets pan/tilt and zoom to low speed.

Short press Press and hold:Minimum speed mode

CAM1 to CAM3 buttons

Press and hold to select the camera to operate.

Memo :

Configure the IR ID setting in [Main Menu] B [System]

[IR ID].

In the event that the [IR ID] setting is not consistent with the selection of the CAM1 to CAM3 buttons, the

POWER lamp on the camera will appear blinking in orange.

Names of Parts

High speed mode

Low speed mode

PRESET number button

Moves the display area to the recorded pan, tilt or zoom position.

MENU button

Press and hold to open the menu for the camera unit.

PRESET button

To be used concurrently with the PRESET number button. Stores the current pan, tilt or zoom position in the PRESET number.

ON/OFF button

Pressing and holding the button disables HDMI and SDI output as well as operation from the remote control unit. Pressing and holding the ON/OFF button again restores the camera to the camera mode.

FOCUS button

Use the F button to adjust focus toward the far end and the N button to adjust toward the near end during manual focus.

REC button

Saves recording to the microSD card on the camera unit. Pressing the button while recording is in progress stops the recording.

Memo :

When using the remote control unit for the first time, remove the battery insulation film before use.

The remote control unit uses one “CR2025” lithium battery. Make sure to load the battery in the correct +/orientation.

Caution :

Do not place the remote control at a location that is subject to high temperature. Otherwise, the remote control may be deformed, thus resulting in malfunction.

Place the batteries at a location that is out of reach of children. In the event that the battery is swallowed by mistake, consult a doctor immediately.

Do not throw the batteries into fire or place them at a location that is subject to high temperature. Otherwise, the batteries may explode.

When replacing the lithium battery, use one that is of the same model or type. Using a different type of battery may cause it to explode.

Page 23

DIP Switch Setting

1ON2345678 1ON2345678

2341234223432344234523462347234

Setting Value (The following is for DIP switches 2 to 4. It is the same for DIP switches 5 to 7)

Bit

Configure the DIP switch before installing this unit.

Switch Bit Function Description Remarks

Left 1 Select

communication mode

2 to 4 Select protocol For selecting protocols. Setting values when LAN is set:

5 to 7 Set camera address For selecting a camera

8 Baud rate For selecting a baud rate

Right 1 RS-232C,

RS-422/485

2 Remote control

infrared output

3 to 7 Service terminals Set them to OFF during

8 RS-422/485

termination

* Combination of bit and setting values of DIP switches 2 to 4 and 5 to 7

For selecting a communication mode.

address.

for serial communication. For selecting a

communication terminal for serial communication.

For selecting an infrared output.

use. RS-485 receiving end

110 Ω termination

OFF: LAN; ON: Serial

0: JVC; 1: D star; 2: Standard; 3 to 7: Reserved Setting values when Serial is set: 0: Reserved; 1: D star; 2: Standard; 3 to 7: Reserved

latest information on compatibility,

* For

please visit our website.

Setting values when bit2 to bit 4 is set to “Standard

”: 0: AUTO; 1 to 7: Cameras 1 to 7 OFF: 9600 bps, ON: 38400 bps

OFF: RS-232C; ON: RS-422/485

OFF: No output; ON: Outputs IR_OUT from RS-232C IN terminal Directing the infrared remote control that comes with commercially

available controllers toward the camera allows you to operate the commercially available controller (connected via RS-232C).

OFF: Do not terminate; ON: Terminate

Getting Started

DIP Switch Setting

Page 24

RM-LP100

KY-PZ100

KY-PZ100 KY-PZ100

LAN cable

HUB

1ON2345678 1ON2345678

Left Right

KY-PZ100 KY-PZ100 KY-PZ100

RS-232C terminal

Commercially available controller

RS-232C terminal

1ON2345678 1ON2345678

Left Right

KY-PZ100 KY-PZ100 KY-PZ100

RS-422 terminal

RS-422 terminal RS-422

terminal

RS-422 terminal

Commercially available controller

1ON2345678 1ON2345678

Left Right

Connection example 1: IP control

Getting Started

Switch Bit Function Settings

Left 1 Select

communication

Set to LAN (OFF).

mode

2 to 4 Select protocol Set to JVC (0).

Connection example 2: Daisy chain connection of commercially available controller (standard protocol) with RS-232C

Switch Bit Function Settings

Left 1 Select

communication

Set to Serial (ON).

mode

2 to4Select protocol Set to Standard

(2).

5 to7Set camera

address

Set AUTO (0) or 1 to 7. (Make sure that there are no

duplicate address numbers.)

8 Baud rate Set to 9,600 bps

(OFF) or 38,400 bps (ON)

Right 1 RS-232C,

RS-422/485

according to the controller.

Set to RS-232C (OFF).

Connection example 3: Connection of commercially available controller (standard protocol) with RS-422

Switch Bit Function Settings

Left 1 Select

communication

Set to Serial (ON).

mode

2 to4Select protocol Set to Standard

(2).

8 Baud rate Set to 9,600 bps

(OFF) or 38,400 bps (ON) according to the

Right 1 RS-232C,

RS-422/485

controller. Set to

RS-422/485.

DIP Switch Setting

Page 25

Tally Lamp

Tally lamp

This is the indicator lamp for recording and warning. The operation changes according to the menu settings. The lamp appears blinking such as when the remaining or when a system error occurs on the camera.

* To configure the setting, go to [Main Menu] B

Display Type Set Status Menu Setting Tally Lamp Status

Information Running with menu settings (recording/

Alarm If power supplied from the LAN terminal is

Warning System error None Blinks twice in 1

level of the microSD card is running low,

] B [Tally Lamp].

[System

P66 [ Tally Lamp ] )

live streaming/external control)

not PoE+ Insufficient space inside microSD card

(Remaining recording time is less than 3 minutes)

Live streaming communication error or waiting to be connected

Memo :

Blinking takes priority over lighting up.

You can adjust the brightness of the tally lamp in [Main Menu

[Brightness].

P66 [ Brightness ] )

When [System] B [Loop Rec] is set to “On”, alarm and warning displays when there is

insufficient or no microSD card space will not be shown.

When [ is set to “External” or “Off”, alarm and warning displays when there is insufficient or no microSD

card space will not be shown.

Other than “Off” Lights up

None Blinks once in 1

Record

Record/Live streaming

Live streaming

Record/Live streaming

] B [System] B [Tally Lamp] B

Main Menu] B [System] B [Tally Lamp]

second

Getting Started

Tally Lamp

Page 26

View Remote (Live View)

100min

1/10000

F1.8

18dB

AE+6

12 :34 : 56

Jan 24 ,2016

00: 00:00.00

4030 20 10 0

5 6

100min

1/10000

F1.8

18dB

AE+6

12 :34 : 56

Jan 24 ,2016

00:00:00.00

4030 20 10 0

5 6

Warning Display Area

Screen and External Monitor Connection Display

Getting Started

During shooting, information such as the camera status, microSD card and time code cannot be displayed externally connected monitor or Live View screen.

Display Screen in Camera Mode

over the video image on the screen of the

When

in the Camera mode, various information

appears on the display screen when [Main Menu] B [System] B [Information Display] is set to “On”.

(A P65

[ Information Display ] )

(A P69 [Display Screen in Camera Mode] )

You can specify where to send the output to in [Main Menu] B [System] B [Information

Display] B [Output].

(A P

65 [ Output ] )

Remote Edit Mode Screen

This is a mode for accessing the page for editing the metadata that is recorded in a clip via a web browser on a PC.

80 [Editing Metadata] )

(A P (A P83 [Uploading a Recorded Video Clip] ) (A P85 [Deleting Recorded Clips] )

Maintenance Mode Screen

This is a mode for running Load or Store with respect to firmware update or the setup file.

Warning Display

Displays warnings on the display screen (Camera mode).

101 [Error Messages and Actions] )

(A P

Status Screen

This screen allows you to check the current settings.

To display the status screen, follow the steps below. Infrared Remote Control View Remote

Use the cross-shaped keys (HI) to switch between the screens.

View Remote (Live View) Screen and External Monitor Connection Display

Press and hold the MENU button to display the menu screen, followed by pressing the MENU button again.

: Open the [MENU] tab and click the

[MENU] button twice.

Video Off Mode Screen

This mode indicates that operation is stopped.

No screen display in the Video Off mode.

Page 27

About microSD Cards

Compatible microSD Cards

Bit Rate Setting and Usable microSD Card Combinations

System Format Bit Rate

HD QuickTime

50M

35M 28M 18M 5M

Memo :

To use a microSDHC card, set Spanning(SDXC)] to “On”.

(A P68

[ 4GB File Spanning(SDXC) ] )

Caution :

Using cards other than those from Panasonic, TOSHIBA or SanDisk may result in recording failure or data loss.

an UHS-I card with no classification indication is used, it may not be possible to perform recording.

Estimated Recordable Time of microSD Cards

The estimated recordable time is only a guide. Differences

may occur depending on the condition

of the microSD card in use.

(A P67 [ Frame Rate ] ) (A P67 [ Bit Rate ] )

60p,

Frame Rate

(*1)

Frame Rate (*2) -

Bit Rate 50M 35M 28M 18M 5M 4GB 9 12 15 23 84 8GB 18 25 31 47 170 16GB 36 50 62 95 340 32GB 72 100 125 190 680 64GB

(SDXC) 128GB

(SDXC)

60i,

30p,

50p,

50i,

50i

25p

60p,

50p

145 200 250 380 1360

290 400 500 760 2720

*1 When [Main Menu] B [System] B [System

Mode] is set to

“1080/60” or “1080/50”

*2 When [Main Menu] B [System] B [System

Mode] is set to “720/60” or “720/50”

Usable

microSD Card

Class 10 or higher

Class 6 or higher

[4GB File

60i,

60p,

30p,

50p

50i,

25p 60p,

50p,

30p,

25p

(Unit: minute)

60i,

50i

30p,

25p

Memo :

If the microSD card contains files recorded by devices other than this camera recorder or files that are saved from a PC, the recordable time may be shorter or data may not be properly recorded.

to 600 clips can be recorded to one microSD

Up card on this unit. When 600 clips are recorded to one card, the remaining space is displayed as 0 min regardless of the estimated recordable time, and no further recording can be performed.

Inserting an microSD Card

Insert the microSD card into the slot according to the orientation indicated by the illustration.

Removing the microSD Card

Push the microSD card and remove it from the slot.

Caution :

Data may be lost if you turn off the power of the camera recorder or remove the microSD card

it is being accessed. All data recorded on

when the card, including the file that is being accessed, may be corrupted. To turn off the power or remove the card, wait for at least 20 seconds after the recording operation has stopped.

The

microSD card may not be recognized if you insert and remove the card within a short time. When this happens, remove the card and wait for a few seconds before you reinsert.

Getting Started

About microSD Cards

Page 28

Formatting (Initializing) microSD Cards

When the following cards are inserted, [!FORMAT] appears at the remaining media display area.

Format the card using the camera recorder menu.

Unformatted microSD cards

microSD cards formatted under different

Getting Started

specifications

details of the menu operation, refer to [Basic

* For

Operations in Menu Screen] (A P 52).

Caution :

Be sure to format the microSD card on this camera. microSD cards formatted on a PC or other peripheral equipment cannot be used on this camera.

Select [System] B [Media] B [Format

Media]

(A P

65 [ Format Media ] )

The status of the selected microSD card appears.

Select [Format] and press the Set button (Set).

Formatting starts.

Formatting is complete.

When formatting is complete, “

Complete” appears and the camera recorder returns to the [Format Media] screen.

Memo :

Formatting cases.

Recording is in progress on the microSD card to be formatted.

A microSD card is not inserted.

cannot be performed in the following

Caution :

you format the microSD card, all data recorded on the card, including video data and setup files, will be deleted.

Restoring the microSD Card

It is necessary to restore the microSD card if an abnormality occurs to the data in the card due to some reasons.

RESTORE] appears in the remaining media level

[! display area and restoring runs automatically when

a microSD card that requires restoring is inserted. [RESTORE:XXX%] appears in the remaining

media level display area while restoring is in progress. To restore manually, follow the steps below.

Select [System] B [ Media].

(A P

65 [ Restore Media ] )

Restoring starts.

Media] B [Restore

About microSD Cards

Restoring is complete.

When restoring is complete, “Complete

”

appears and the camera recorder returns to the [Restore Media] screen.

When no media that requires restoring is inserted, the camera recorder returns to the [Media

] menu screen.

Page 29

Caution :

ABCG0001

This is set to “xxxG” (“xxx” denotes the last 3 digits of the serial number) by default.

Clip Name Prefix (any four alphanumeric characters)

The Clip Number can be reset in the menu.*

A number in automatic ascending order is assigned in the recording order.

Clip Number

[Restore

Media] can only be selected in Camera

mode. However, it cannot be selected while the camera recorder is recording. Select [Restore

Media] in Camera mode when the camera recorder is not recording.

[Restore Media] does not restore the microSD card

to its original states completely. If restoring fails, replace or format the microSD card. Take note that formatting erases all the information inside the microSD card.

Restoring cannot be performed in the following cases.

Camera recorder is recording in progress.

A microSD card is not inserted.

Clips Recorded to microSD Cards

Folders in the microSD Card

Images recorded are saved to a “DCIM” is automatically generated inside the microSD

card. Memo :

formatting (initializing) the microSD card from

the [Format Media] menu on the camera recorder, folders required for recording in the

current [System] settings will be generated.

Caution :

a clip inside the folder is moved or deleted

When using the Explorer (Windows) or Finder (Mac), recording to the microSD card may fail if formatting (initializing) of the card is not performed.

folder that

Clip (Recorded Data) and Clip Name

When recording is stopped, the images, audio and accompanying data which are recorded from start to stop are recorded as one “clip” on the microSD card.

An 8-character clip name is automatically generated for the recorded clip. (“Clip Name Prefix

” + “Clip Number”)

* [Clip Set] B [Reset Clip Number]

(A P68 [ Reset Clip Number ] )

Memo :

Before recording starts, you can set any characters for the clip name prefix by using [Main

Menu] B [System] B [Record Set] B [Clip

Set] B [Clip Name Prefix].

(A P

68 [ Clip Name Prefix ] )

Changes cannot be made after recording.

Recorded Clips

The video recordings might be split into multiple files in some cases.

Getting Started

About microSD Cards

Page 30

Mounting the Camera to the Ceiling Mount Bracket

sure to put on protective glasses to protect

Be your eyes from falling objects when mounting the camera.

Be sure to place the base of the camera horizontally. The camera will not operate

Installation/Connection

properly if it is slanted.

Memo :

The ceiling mount bracket is not necessary when the camera is installed on a desktop or attached to a tripod.

necessary, make a hole (Φ40 mm) to route the connection cable and fall prevention wire (ceiling) into the ceiling.

Caution :

The fall prevention wire (for ceiling) is not supplied. of its length, strength, pull and material (insulation).

Attach the fall prevention wire (ceiling) to a place with sufficient strength (ceiling slab, etc.).

Take note of the length, strength, pull and material (insulation) of the fall prevention wire (for ceiling) and use one with a wire strength of 150 N (15 kg) or more.

The inner diameter of the ring section of the fall prevention should be above Φ3 mm but below Φ4 mm, the outer diameter should be Φ9 mm and below, and the thickness 2 mm and below.

Make use of the wire while taking note

wire (ceiling) mounted on the camera

Place the supplied template against the ceiling, and fasten the ceiling mount bracket with four screws (M4 wooden screws:

Caution :

The fall prevention wire (camera) is designed exclusively anything other than this product.

Φ4.1).

Prior to mounting, check the “FRONT” mark on

the ceiling mount bracket to ensure that it is facing the same direction as the front of the camera. Check that the screws are tighten securely when mounting is completed.

for hanging this product. Do not load

Fix the fall prevention wire (camera) to the ceiling mount bracket using the screw (M2.6) provided.

Mounting the Camera to the Ceiling Mount Bracket

Page 31

Installing the Camera on the Ceiling

Set the DIP switch.

Set the DIP switch prior to mounting the camera to the ceiling mount bracket.

Insert an microSD card.

Insert the card as necessary during installation.

Attach the fall prevention wire (camera),

is fixed to the ceiling mount bracket,

which to the camera.

Insert the tip of the fall prevention wire (camera) to the groove of the camera, and move it toward the direction indicated by the arrow.

Check that the fall prevention wire (camera) is fixed securely to the camera.

Mount the camera to the ceiling mount bracket.

Align the cutout of the ceiling mount bracket and the line indicated on the camera. Press the camera unit to insert, and then turn the camera clockwise.

Fix the camera and the fall prevention wire (ceiling) the provided screw (M3).

Connect the adapter to the [USB] terminal.

(A P75 [Connecting to Network via Terminal] )

Connect the cables after these procedures.

on the ceiling mount bracket using

Check that the screws are tighten securely when mounting is completed.

When needed, connect the adapter according to the intended purpose.

[USB]

Installation/Connection

Installing the Camera on the Ceiling

Page 32

Installing the Camera on a Desktop

Attaching the Camera to a Tripod

the DIP switch prior to installing the camera.

Set

Place the camera on a flat surface.

Be sure to place the base of the camera horizontally. The camera will not operate properly if it is slanted.

Memo :

Installation/Connection

The

use of ceiling mount bracket is not required.

Caution :

Do not move the camera while the power of the system is on. Doing so may result in malfunctions or accidents.

not hold the camera head while carrying the

camera.

Connect the cables after these procedures.

the DIP switch prior to installing the camera.

Set

Attach a tripod using the screw hole at the bottom of this product. (1/4-20UNC, ISO1222 (6.35 ㎜))

To prevent the camera recorder from falling off, which may result in injuries or damages, read the “INSTRUCTIONS” of the tripod to be used and make sure that it is securely attached.

To ensure proper pan/tilt operation, set the tripod such that the camera is parallel to the horizontal surface.

Memo :

The

use of ceiling mount bracket is not required.

Caution :

If the camera recorder exceeds the weight limit of the tripod, do not mount it on the tripod.

Use the tripod on a stable surface.

Use

screws with a screw length between 4.5 mm

and 7 mm.

Do not install the camera at a high location when the camera is attached to a tripod.

Connect the cables after these procedures.

Installing the Camera on a Desktop

Page 33

Connecting the Cables

Connect the power cable.

To supply power from an AC adapter, connect an AC adapter cable.

To supply power via PoE+, proceed to the next step without connecting an AC adapter cable.

the AC adapter cable with a cable clamp.

Fix

Connect the LAN cable.

Connect the SDI cable. (Optional)

Connect the HDMI cable. (Optional)

Connect the microphone cable or audio cable. (Optional)

Remove the protective sheet attached to the infrared remote control sensor.

Caution :

safety reasons, turn on the power only after

For ensuring that all the connections are in place.

Do not supply power through the AC adapter cable and LAN cable at the same time.

Warning

To supply power to this unit, use a DC 12 V or PoE+ (IEEE802.3at Type2) power. Make use of the correct voltage. Supplying a power beyond the rated value may result in failures, smoke or fire. If the camera breaks

down, turn off the power and contact our service center immediately. When a power beyond the rated value is supplied, the internal components may be damaged even if no abnormality is found on the appearance and operation of the camera. Please contact our service center immediately for servicing (charged separately).

Installation/Connection

Connecting the Cables

Page 34

IP Address Settings

Using the IP Setting Tool

Connect the camera to be configured to the network via the LAN terminal.

Download the “IPSettingTool stated on the cover page.

Connect the computer for executing the “IPSettingTool

Installation/Connection

communication with the camera to be configured.

Start up “IPSettingTool”.

Click the [Search] button.

Select from the list the camera to be configured.

Enter the respective network setting items and click the

confirmation screen appears, click [OK].

“Default Gateway

” to the network to establish

[Setting] button. After a

” can be omitted.

” from the URL

setting is successful, the search list display

will be updated.

If there are multiple cameras to be configured, repeat steps 3 to 4 for each camera.

Memo :

When the “Failed in the Setting.” message is displayed, check the setting details and review

the connecting device then try again.

Click the [Close] button to exit.

Memo :

Cameras with the same IP address as the computer for configuring the IP address cannot be detected.

Make sure that there is no duplication in the IP address configured for each camera.

When a firewall has been installed, change the setting to allow communication access by the

IPSettingTool”.

“

The “IPSettingTool

” runs on Windows. For more

information on setting the IP address in an environment other than Windows, please refer to the [Configuring IP Address Manually] (A P 35).

IP Address Settings

Page 35

Configuring IP Address Manually

Display the menu screen on the external monitor using the infrared remote control to set the IP address.

Connection via the LAN terminal

[Connecting to Network via [LAN]

(A P75 Terminal] )

Connection via the USB terminal

(A P

75 [Connecting to Network via [USB]

Terminal] )

Confirming the Connection

Operating Environment Operation has been verified for the following environments.

Computer

OS: Windows 7 Web browser: Google Chrome

OS: Windows 10 Web browser: Google Chrome

OS: Mac OS X 10.11 Web browser: Safari

Start up the web browser on the terminal you wish to connect to the camera recorder, and enter the IP Address in the address field.

(Example: http://192.168.0.25)

Memo :

The default IP address of the camera is as follows. LAN terminal: 192.168.0.10 USB terminal (Ethernet adapter): 192.168.1.10

Enter the user name and password.

Enter the user name (jvc) and the password (initial password: 0000) on the login screen to display the Live View screen.

Installation/Connection

Memo :

The Live View screen is not displayed when [Main Menu

Access] is set to “Off”.

Be sure to change the login password on first login.

(A P

] B [Network] B [Web] B [Web

60 [ Login Password ] )

IP Address Settings

Page 36

View Remote Screen

S T U V W

X Y

K J

Camera Operation

Using View Remote

Live View screen/Settings screen selection button

Switches between the Live View screen and Settings screen. For details on the setting screen, please refer to [Changing Settings] (A P 87).

Pan/Tilt operation button

Arrow buttons R button : Restores the display area to the

Pan/Tilt speed/Zoom selection button

On : Increasing the zoom ratio to a

Off : Pan/Tilt speed remains constant

Pan/Tilt speed setting bar

For setting the Pan/Tilt speed.

Zoom operation button

Enables zooming operations.

AF/MF selection button

Auto : Sets to auto focus. Manual : Sets to manual focus.

Focus operation button

Enables focusing operations. Enabled only during manual focus.

One-Press AF button

Pressing the button adjusts the focus automatically. Enabled only during manual focus.

Preset number input button

Enter a preset number from 1 to 100. Pressing the C button clears the input.

: Moves the camera in the direction

of the arrow.

default position.

higher value decreases the Pan/Tilt speed.

regardless of the zoom ratio.

View Remote Screen

Preset number display

Displays the preset number you have entered.

Preset operation button

Set

: Registers the preset number.

A confirmation message appears

before registration is executed. Move : Executes the preset operation. Delete : Executes the delete operation.

A confirmation message appears

before registration is executed.

Preset speed setting bar

For setting the preset moving speed for the pan/ tilt operation.

Live streaming On/Off button

Switches live streaming between On/Off.

Memo :

The

Live View screen is not displayed while live

streaming is in progress.

Video On/Off button

: Pressing this button in the Video Off

mode restores the pan/tilt setting to the position before entering the Video Off mode and outputs the camera image.

Off : Stops camera output after moving the

pan/tilt position to the rear and facing down. (Switches to the Video Off mode.)

Record Start/Stop button

: Starts recording

: Stops recording

Live View screen

Displays the Live View screen.

Camera name

Displays the name of the preset camera on the setting screen.

Camera operation/menu operation selection tab

Pressing the tab switches between camera operation and menu operation. (A P37 [Menu Operation] )

Exposure selection button

Auto : Adjusts the brightness

automatically. Shutter : Switches to shutter priority (manual

for shutter and auto for all others)

operation. Iris : Switches to iris priority (manual for

iris and auto for all others)

operation. Manual : Switches iris, gain and shutter to

manual operation.

Page 37

AE Level adjustment button

Adjusts the AE level. Enabled only when the

button is not set to “Manual”.

: Increases brightness.

: Decreases brightness.

Iris adjustment button

Adjusts the Iris. Enabled only when the [Exposure] selection

button is set to “Manual” or “Iris”.

: Sets the iris to the Open side.

: Sets the iris to the Close side.

Gain adjustment button

Adjusts the gain level. Enabled only when the [Exposure] selection

button is set to “Manual”.

: Increases the gain level.

: Decreases the gain level.

Shutter adjustment button

Adjusts the shutter speed. Enabled only when the [Exposure] selection

button is set to “Manual” or “Shutter”.

: Increases the shutter speed.

: Decreases the shutter speed.

White Balance mode button

FAW : Switches the camera to the

AWB : Pressing the [AWB Trigger] button

3200K : Sets the color temperature to

5600K : Sets the color temperature to

Manual : For adjusting R gain/B gain

[AWB Trigger] button

Pressing the button adjusts the white balance automatically. Enabled only when the [White Balance]

selection button is set to AWB.

Automatic White Balance mode. The white balance is automatically adjusted according to the color temperature of the lighting on the object.

automatically adjusts the white balance.

3200K.

5600K.

manually.

[Exposure] selection

White Balance adjustment panel display

Displays the AWB paint adjustment value when the [White Balance] mode selection

button is set to “AWB”. Example: AWB Paint ----R:±32 B:±32

Displays the [White Balance] mode selection button is

set to “Manual”. Example: R/B Gain ----R: 0 to 255 B: 0 to 255

Not displayed if the selection button is not set to any of the above.

R/B Gain adjustment panel

Displays Color Panel 1 when the [White Balance] mode selection button is set to “AWB”. Adjust AWB paint to a value within the ±32 range using the R/B Gain adjustment

button.

Displays Color Panel 2 when the Balance] mode selection button is set to “Manual”. Adjust R/B gain to a value between 0 and 255 range using the R/B Gain

adjustment button.

A monochrome panel is displayed and adjustment is disabled when the

Balance] mode selection button is not set to any of the above.

R/B Gain adjustment button

J K H I

Menu Operation

the R/B gain adjustment value when

[White Balance] mode

Increases R gain : Decreases R gain : Decreases B gain : Increases B gain

Using View Remote

[White

Menu operation button

For operating the camera menu.

SUB 1 to SUB 3 buttons

Executes 3 is displayed on the operation guide during menu operation.

the displayed function if SUB 1 - SUB

View Remote Screen

Page 38

Basic Shooting Procedures

You are recommended to operate this camera by connecting it to a PC or a controller.

Preparations

Supply power to the camera via a LAN cable or AC adapter.

P33 [Connecting the Cables] )

Insert an microSD card.

P27 [Inserting an microSD Card] )

Configure the IP address of the camera.

Using IPSettingTool allows you to configure the

Shooting

IP address easily.

34 [Using the IP Setting Tool] )

(A P You can also configure the IP address manually without using the IPSettingTool. (A P35 [Configuring IP Address Manually] )

Check the connection.

35 [Confirming the Connection] )

(A P

Memo :

The supplied infrared remote control unit might not work depending on the conditions of installation.

Descriptions on the operation of this camera focus on operation via a web browser (Live View) screen on a PC.

Selecting Video Recording Resolution, Frame Rate and Bit Rate

can select the resolution of the recorded video,

You frame rate and bit rate on this camera by displaying the web browser (Live View) screen or the menu screen on an external monitor.

(A P52 [Displaying the Menu Screen] )

Selecting a System Definition

Select a resolution in [Main Menu] B

System] B [System Mode].

[

Select a frame rate

Frame rates that are selectable vary according to the setting in System Mode.

65 [ System Mode ] )

(A P

System Mode Frame Rate 1080/60 60p, 60i, 30p 1080/50 50p, 50i, 25p 720/60 60p, 30p 720/50 50p, 25p

Select a bitrate

Bitrates that are selectable vary according to the settings in [System Mode

(A P65 [ System Mode ] ) (A P67 [ Frame Rate ] )

System Mode Frame Rate Bit Rate 1080/60, 1080/50 60p, 50p 50M, 28M 1080/60, 1080/50 60i, 50i 50M, 35M, 18M,

1080/60, 1080/50 30p, 25p 50M, 35M, 18M 720/60, 720/50 60p, 50p 35M, 18M 720/60, 720/50 30p, 25p 18M, 5M

] and [Frame Rate].

Basic Shooting Procedures

Page 39

Preset Mode

You can store different operations of your choice on this camera.

Storing/Recalling the Current Preset Information

Save the preset information.

Move to the pan/tilt/zoom position you want to

store as a preset position, and change the

corresponding setting.

Enter a [Preset] number button and press

Save] button.

the [

Doing so stores the current pan/tilt/zoom position and the different settings to the preset number.

Recall the stored preset number.

Use the preset pan/tilt speed setting bar to set the pan/tilt speed.

Use the [Preset number you want to recall, followed by

pressing the [Move] button. The camera moves itself to a position that is registered as

a preset position.

Memo :

Operating other controls during a preset recall will cancel the recall.

To delete a preset, use the number button to enter the number you want to delete, followed by pressing the [Delete] button.

] number button to enter the

You can store detailed preset information from 1 to 10, and simplified preset information from 11 to

100.

Preset

Information

Image Stabilizer

Exposure AE Speed AE Level Slow Shutter AGC Limit Gain Night Mode Digital Zoom Focus Mode AF Speed Detail High

Sensitivity NR WDR White

Balance

AWB Paint

R/B

Gain Color Gain Color Phase Shutter

Position Zoom

Position Focus

Position IRIS Position PAN Position TILT Position

Memo :

Upon recalling a preset number, the setting of the item corresponding to the number will be retained

Detailed Simplified Refer to

c b

c b c b c b c b c b c c c b c b c b c b c b c b

c b c b c c

c c

c b c b c c

c c

c c c c c c

until the next preset number is recalled.

(A P

(A P (A P (A P (A P (A P (A P (A P (A P (A P (A P (A P (A P

(A P (A P (A P

(A P

(A P (A P

55 )

55 ) 55 ) 55 ) 55 ) 55 ) 55 ) 55 ) 56 ) 56 ) 56 ) 56 ) 56 )

56 ) 56 ) 57 )

57 )

57 ) 57 )

Shooting

Preset Mode

Page 40

Pan/Tilt Operation

100min

1/10000

F1.8

18dB

AE+6

12 :34 : 56

Jan 24 ,2016

00: 00:00.00

4030 20 10 0

5 6

Adjust the direction the camera is facing by pressing the [Arrows] on the Pan/Tilt Control

on the web browser (Live View) screen.

buttons

Pressing the R button restores the display area to the default position.

Use the pan/tilt speed setting lever to set the pan/tilt speed.

Shooting

Memo :

You can set restrictions on the left and right positions.

(A P

57 [Pan Right Limit/Pan Left Limit] )

You can set restrictions on the top and bottom positions.

(A P58 [Tilt Up Limit/Tilt Down Limit] )

Pan/tilt comes with a preset feature for setting the preset speed and deceleration curve.

(A P57 [ Ramp Curve ] )

You can store the preset information in the camera.

The camera body may be captured at some pan/ tilt positions.

Zoom Operation

Adjusts the angle of view. Optical zoom ratio: 1x to 30x Digital zoom ratio: 30x to 360x Set digital zoom to

[Camera Function] B [Digital Zoom].

(A P56 [ Digital Zoom ] )

You can control zoom using the button on the browser screen. During the zoom operation, the zoom bar or number will appear at the top right corner of the display screen.

(A P70 [Zoom Display] )

“On”/“Off” in [Main Menu] B

Pan/Tilt Operation

Page 41

Focus Operation

100min

1/10000

F1.8

18dB

AE+6

12 :34 : 56

Jan 24 ,2016

00: 00:00.00

4030 20 10 0

5 6

100min

1/10000

F1.8

18dB

AE+6

12 :34 : 56

Jan 24 ,2016

00: 00:00.00

4030 20 10 0

5 6

Adjusting Focus Automatically

Adjusting the Brightness

Adjust the brightness using Iris, Gain and Shutter speed according to the brightness of the object.

Press the [Auto] button under the [Focus] tab on the browser (Live View) screen.

An auto focus icon e appears on the display screen.

One Push Auto Focus

While focus is set to manual, pressing the [Push

button establishes focus automatically on the

Auto] center frame.

Memo :

One Push Auto Focus functions with emphasis on the focusing speed. This function is not suitable during recording.

Adjusting Focus Manually

Press the [Manual] button under the

Focus] tab on the browser (Live View)

[ screen.

The manual focus icon d appears on the screen.

Adjusting

the Brightness Automatically: Automatic Brightness Adjustment (AE) Mode

Iris, Gain, Shutter speed and ND filter are automatically of the object to maintain optimum brightness.

Set the target level (brighter/darker) to maintain optimum brightness during automatic adjustment.

J K

Memo :

The convergence speed of the automatic adjustment (AE) can be set in the menu.

(A P55 [ AE Level ] )

Adjustment cannot be performed when the

Exposure] selection button is set to “Manual”.

[

adjusted according to the brightness

When the [Exposure] selection button is set to “Auto”, “Shutter”

or “Iris”, you can configure

the setting using the AE level control button on the View Remote screen.

Increases the brightness.

: Decreases the brightness.

for automatic brightness adjustment

Shooting

Press the focus control button to adjust focus.

Focus Operation

Page 42

Adjusting the Brightness Manually

100min

1/10000

F1.8

18dB

AE+6

12 :34 : 56

Jan 24 ,2016

00: 00:00.00

4030 20 10 0

5 6

When the [Exposure] selection button is set to a value other than “Auto”, some or all of the settings (Iris, Gain and Shutter Speed) can be manually

adjusted.

Press the [Shutter Switches to the shutter priority mode for manual

setting of the shutter. Other settings are adjusted automatically.

Press the [Iris] Switches to the iris priority mode for manual

setting of the iris. Other settings are adjusted automatically.

Press the [Manual Switches iris, gain and shutter to manual

operation.

Memo :

Shooting

When the [Exposure “Manual”, the [AE Level] setting is disabled.

] button:

button:

] button:

] selection button is set to

Adjusting the Iris

the aperture of the lens iris according to the

Adjust brightness of the subject.

Auto Iris (Automatic Adjustment) Mode

Set [Exposure] to “Auto” or “Shutter”.

The iris is automatically adjusted according to the brightness of the object. The lens aperture value (F-number) is not displayed in the Auto Iris mode.

Memo :

The convergence speed of the auto iris can be set in the menu.

)

(A P55

Manual Iris (Manual Adjustment) Mode

The aperture value (F-number) of the lens can be set manually.

Set [Exposure] to “Iris” or “Manual”.

The lens aperture value (F-number) is displayed.

Adjusting the Brightness

Page 43

100min

1/10000

F1.8

18dB

AE+6

12 :34 : 56

Jan 24 ,2016

00: 00:00.00

4030 20 10 0

5 6

Press the iris adjustment button to adjust the iris manually.

J K

Sets the iris to the Open side.

: : Sets the iris to the Close side.

The open F-number of the aperture varies according to the zoom position. Wide [W] end

: F1.6

Tele [T] end : F4.7

F-number Description

Decrease The subject appears brighter.

The area in focus becomes narrower, while the background is blurred to produce a soft image.

Increase The subject appears darker.

Background of image becomes focused as well.

About the Iris F-number

Blurry effects due to “small aperture diffraction” may occur when the diameter of the iris becomes too small. You are therefore recommended to use the

camera in an environment that does not require

you to narrow the iris excessively.

Setting the Gain

This

function electrically boosts the light sensitivity when there is insufficient illumination on the object. You can set the gain of the video amplifier according to the brightness of the object. Select the setting mode according to your shooting conditions.

Automatic Gain Mode (Automatic Gain Adjustment)

Set [Exposure] to “Auto”.

Memo :

The upper limit of the gain setting value during AGC operation can be set in

[Camera Function] B [AGC Limit].

(A P55

[ AGC Limit ] )

Manual Gain Mode (Manual Gain Switching)

Set [Exposure] to “Manual”.

Press the gain adjustment button to adjust the gain level.

J K

Increases the gain level.

: : Decreases the gain level.

[Main Menu] B

Shooting

Memo :

Increasing the sensitivity causes the screen to appear grainier.

Adjusting the Iris

Page 44

Setting the Electronic

100min

1/10000

F1.8

18dB

AE+6

12 :34 : 56

Jan 24 ,2016

00: 00:00.00

4030 20 10 0

5 6

Shutter

You can change the shutter speed (time for each shooting frame) using the electronic shutter function. Electronic shutter can be adjusted manually or automatically.

Automatic Shutter Mode (Automatic Shutter Adjustment)

Shooting

Set [Exposure] to “Auto” or “Iris”.

A a

icon appears on the left side of the shutter

speed.

Automatic Shutter mode adjusts the shutter speed automatically according to the brightness of the object.

Manual Shutter Mode (Manual Shutter Switching)

Set [Exposure] to “Shutter” or “Manual”.

Press the shutter adjustment button to adjust the shutter speed.

J K

0 0

Increases the shutter speed.

: : Decreases the shutter speed.

The shutter speed appears on the screen. The a icon displayed on the left side of the shutter speed disappears.

Memo :

The settable shutter speed range differs according to the frame rate setting.

Frame Rate 60p, 60i, 30p 50p, 50i, 25p

(Upper limit) 1/10000 1/10000

1/6000 1/6000 1/4000 1/3500 1/3000 1/2500 1/2000 1/1750 1/1500 1/1250 1/1000 1/1000

1/725 1/600 1/500 1/425 1/350 1/300 1/250 1/215 1/180 1/150 1/125 1/120 1/100 1/100

1/90 1/75

Default values 1/60 1/50

1/30 1/25 1/15 1/12

(Lower limit) 1/8 1/6

Setting the Electronic Shutter

Page 45

Adjusting the White Balance

Adjust the white balance according to the color temperature of the lighting. You can select the adjustment mode according to the shooting conditions. As the color of the light (color temperature) varies according to the light source, it is necessary to readjust the white balance when the main light source illuminating the subject changes.

Automatic White Balance Mode (FAW: Fulltime Auto White balance)

Set the [White Balance] mode selection button to “FAW

Switches Balance mode. The white balance is automatically adjusted according to the color temperature of the lighting on the object.

Memo : The FAW (Full Time Auto White Balance) mode

makes automatic adjustments by sampling the color temperature of the video to obtain the most appropriate white balance level.

AWB Mode

Set the [White Balance] mode selection button to “AWB”.

Press the [AWB Trigger] button.

Pressing the button automatically adjusts the white balance.

Memo :

there are changes in the shooting environment while the AWB mode is functioning, press the [AWB Trigger] button again to adjust the white

balance.

”.

the camera to the Automatic White

Caution :

Do not use highly reflective objects, such as metals. Doing so may result in improper white balance adjustment.

The AWB function cannot provide optimum white balance with an object outside the adjustment only a single color or not enough white color.

AWB Paint Adjustment

You can fine-tune the white balance that was automatically adjusted by AWB.

Adjust the R and B values.

Fine-tune using the AWB paint adjustment button while referring to the AWB paint adjustment panel.

* Use the cross-shaped button (JK) to adjust R

value and (HI) to adjust B value.

* You can also adjust the R and B values by

dragging the point (X mark) on the adjustment panel.

range, for example when it contains

Manual White Balance Mode (Manual Switching)

Set the [White Balance] mode selection button to “Manual”.

R/B Gain and the corresponding value are displayed. Example: R/B Gain R:186 B:173

Fine-tune using the R/B Gain adjustment button while referring to the R/B Gain adjustment panel.

* Use the cross-shaped button (JK) to adjust R

value and (HI) to adjust B value.

* You can also adjust the R and B values by

dragging the point (X mark) on the adjustment panel.

Shooting

Adjusting the White Balance

Page 46

Adjusting the Camera

100min

1/10000

F1.8

18dB

AE+6

12 :34 : 56

Jan 24 ,2016

00: 00:00.00

4030 20 10 0

5 6

Image

The picture quality of the camera can be set using the [Camera Process

As the adjustments are shown on the screen, you can adjust the values while checking the picture quality on the camera.

Detail]

[

[High Sensitivity]

[NR]

[WDR]

[White Balance

[

Color Gain]

[Color Phase

Shooting

Memo :

For details of the respective items, see the [Camera Process

(A P56

[Camera Process Menu] )

] menu.

]

] menu.

Using the Image Stabilizer

Reduces image.

Memo :

blur caused by camera shake in the video

Check whether the image stabilizer feature is turned ON or OFF.

If the image stabilizer icon (i)

does not appear on the screen display, the image stabilizer function is OFF.

Set [Main Menu] B [

Camera Function] B

[Image Stabilizer] to “On” to reduce video image blur.

Correction by this feature may not be sufficient when camera shake is too strong.

The angle of view becomes narrower when the image stabilizer function is turned on.

The image stabilizer function is disabled when pan/tilt is operating.

Adjusting the Camera Image

Page 47

Audio Recording

100min

1/10000

F1.8

18dB

AE+6

12 :34 : 56

Jan 24 ,2016

00: 00:00.00

4030 20 10 0

5 6

00:00:00.00

FF EE DD 20

Time Code and User’s Bit

can record audio from the two channels (CH1/

You CH2) in synchronization with video images on this camera recorder.

Recording Audio Sound

Set [Main Menu] B [A/V Set [Audio] to “On” to turn on audio input to the [AUDIO IN] terminal.

] B [Audio Set] B

Selecting the Audio Sound to Record

Select the audio sound to input to the [AUDIO IN] terminal from [Main Menu] B [A/V Set] B [Audio Set] B [Input Select

Setting Description

[Line] Use this setting when connecting to

an audio device or other equipment. The reference input level is +4 dBu.

[Mic] Use this setting when connecting to

a dynamic microphone.

[Mic +2.5 V] Use this setting when connecting to

microphone that requires a +2.5 V

a power supply.

Setting the Audio Gain

For setting the audio input level.

(A P

59 [ Audio Gain ] )

Time

code and user’s bit data are recorded with the video in this camera recorder. During recording, the time code and user’s bit are displayed on the externally connected display screen or the Live View screen.

Displaying Time Code and User’s Bit

During recording, the time code and user’s bit are displayed on the externally connected display screen or the Live View screen. The

display differs according to the menu settings.

Make a selection from [Main Menu] [System] B [Information Display] B [TC/UB].

(A P65 [ TC/UB ] ) When “TC” or “UB” is selected, time code or user’s bit data is displayed respectively on the display screen.

Shooting

Audio Recording

Page 48

Time Code Operation Mode

Set the time code operation in [Main Menu UB] B [TC Generator].

(A P58 [ TC Generator ] )

Setting Description

Free Run The time code operates in the run

Rec Run The time code operates in the run

Shooting

Regen The time code operates in the run

mode at all times regardless of the recording status. It continues to run even when the power of the camera recorder is turned off.

mode during recording. It continues recorded clips as long as the microSD card is not replaced. If the microSD card is removed and recording is made on another card, time code will be recorded on the new card from where it was left off in the previous card.

mode during recording. When the microSD card is replaced, the last time code recorded on the card is read and recorded on a new card so that the time code continues in running order.

to run in the order of the

48 [Setting Time Code

(A P Generator] )

] B [TC/

Setting Time Code Generator

Presetting the Time Code

Time code and user’s bit data generated from the internal time code generator are recorded. This section describes how to set

Preset].

(A P58 [ TC Preset ] )

Memo :

When [Main Menu B [Record Format] B [Frame Rate] is set to “50p” or “50i”, setting for “Drop” will be disabled.

P67 [ Frame Rate ] )

You can configure the setting without accessing the [TC/UB] menu screen.

Required Settings Before Preset

Set [TC/UB] B [ Run” or “Free Run”.

(A P

58 [ TC Generator ] )

[Rec Run]: Preset data in the time code generator

operates in run mode during recording mode. Set this when recording continuous time code in connecting frames.

[

Free Run]:

Time code starts to operate in run mode from the preset time in the time code generator.

] B [System] B [Record Set]

TC Generator] to “Rec

[TC/UB] B [TC

Time Code and User’s Bit

Page 49

During drop frame

During non-drop frame

Cursor

Select the framing mode for the time code generator is “60” or “30”).

Set using [Main Menu] B [TC/UB] B [Drop Frame]. (A P

[Drop]: Sets

to drop frame mode. Use this setting when placing emphasis on the recording time.

[Non Drop] Sets the run mode of the time code generator

to non-drop frame mode. Use this setting when placing emphasis on the number of frames.

Memo : Drop frame/non-drop frame mode

When [Main Menu] B [System] B [Record Set] B [Record Format

“60p”, “60i”, or “30p”, the actual number of frames per second is approximately 59.94

(29.97). However, the time code processing standard is “60p”, “60i”, or “30p” frames. To

make up for the frame number discrepancy, the drop frame mode (Drop) drops the 00 frame and 01 frame every minute except for minutes that are multiples of 10. However, in the case of “60p”, the 00, 01, 02 and 03 frame are dropped.

The drop frames and ignores the discrepancy with the actual time.

(only when the frame rate setting

58 [ Drop Frame ] )

the run mode of the time code generator

] B [Frame Rate] is set to

non-drop frame mode (Non Drop) does not

Setting Time Code

Select [Main Menu] B [ Preset] and press the Set button (Set).

(A P

58 [ TC Preset ] )

The [TC Preset] screen appears.

Memo :

When [TC/UB] B [TC Generator] is set to “Regen”, and cannot be selected.

(A P

Set the time code (hour, minute, second, frame).

Use the cross-shaped button (HI) to place the cursor at the item to set, then use the crossshaped button (JK) to change the values.

the parameter is displayed as “Regen”

58 [ TC Generator ] )

TC/UB] B [TC

Shooting

Memo :

Pressing “0” and moves the cursor to the hour digit (left).

Check the values and press the Set button (Set).

Press the [Back] button.

Returns to the normal screen.

the [SUB 2] button resets each digit to

The time code is set and the screen returns to [TC/UB].

Setting Time Code Generator

Page 50

Recording Time Code in Continuation of

the Recorded Time Code on microSD Card

This camera recorder is equipped with the time code reader.

Set [TC/UB] B [TC Generator]

When the camera recorder enters from recording standby mode to recording mode, it reads the time code already recorded on the microSD card and records the new time code in continuation of that value.

The same data as the user’s bit already recorded on the microSD card is recorded.

Memo :

When [TC/UB] B [TC Generator “Regen”, the framing mode of the time code

Shooting

follows the settings in [TC/UB] B [Drop Frame] instead of the clip settings.

(A P58

[ Drop Frame ] )

to “Regen”.

] is set to

Setting the User’s Bit

You can add the date, time or an 8-digit hexadecimal number as the user’s bit to the recorded image.

Selecting a Recording Mode

Recording date/time information to the user’s bit

Set [Main Menu] B [TC/UB] B [ “Date” or “Time”, and press the Set button (Set).

P58 [ UB Mode ] ) The date or time information is recorded to the user’s bit.

Memo :

When “Date” or “Time as “-” and cannot be set.

“Time

” is displayed in the 24-hour format.

” is set, [Preset] appears

Presetting the User’s Bit

Recording arbitrary information (8-digit hexadecimal) to the user’s bit

Set [Main Menu] B [ “Preset”, and press the Set button (Set).

(A P

58 [ UB Mode ] )

TC/UB] B [UB Mode] to

UB Mode] to

Setting Time Code Generator

Memo :

When [TC/UB] B [TC Generator] is set to “Regen”, and cannot be selected.

(A P

the parameter is displayed as “Regen”

58 [ TC Generator ] )

Page 51

Cursor

100min

1/10000

F1.8

18dB

AE+6

12 :34 : 56

Jan 24 ,2016

00: 00:00.00

4030 20 10 0

5 6

Select [Main Menu] B [

TC/UB] B “Preset”

and press the Set button (Set).

The [Preset] setting screen appears.

Use the cross-shaped button (HI) the cursor at the item to set, then use the cross-shaped button (JK) to change the values.

Numbers between 0 and 9 or alphabets between A and F can be specified for the user’s bit.

to place

Loop Recording

During normal recording, the camera stops recording automatically when the microSD card memory is full. In this case, you can enable the Loop Recording feature for recording to continue.

Memo :

Pressing the [SUB 2] button resets each digit to “0” and moves the cursor to the hour digit (left).

Check the values and press the Set button (Set).

user’s bit is set and the screen returns to

The [TC/UB].

Press the [Back] button.

Returns to the normal screen.

Set [Main Menu] B [System] B [Record Set] B [Loop Rec] to “On”.

Set the frame rate in [Main Menu] B [System] B [Record Set] B [Frame Rate].

(A P

67 [ Frame Rate ] )

Memo :

The

[Main Menu] B [System] B [Record Set] B

[4GB File Spanning(SDXC)] setting changes to “On”.

(A P68

[ 4GB File Spanning(SDXC) ] ) Although recording is continuous, the videos are not processed as a single clip but as a new file that contains multiple clips.

The clips are automatically split while recording is in progress.

When the remaining space on the card runs out, files will be deleted automatically starting from the oldest data and recording will continue without disruption.

During Loop Recording, the remaining level of the media displayed is the maximum recording time of the microSD card.

However, the maximum recording time of the card may be shorter than the remaining level that is displayed.

You are recommended to format the card before using.

Shooting

Setting the User’s Bit

Page 52

Basic Operations in Menu

Screen

The menu screen can be displayed on the web browser the externally connected monitor.

Various settings for shooting can be configured on the menu screen.

Displaying the Menu Screen

Menu Display and Detailed Settings

Memo :

When [Back [Back] returns the display to the menu screen that is one level higher in the hierarchy.

Display and Description of the Menu Screen

Selecting Menu Items

(View Remote) screen or the screen of

Press the L (Live View) button in the [Live View/setting screen selection] tab on the web browser (View Remote) screen.

The Live View screen is displayed.

Press the [MENU] button in the [camera/ menu operation screen selection] tab on

the View Remote screen.

The display switches to the menu operation screen.

Press the [MENU] button on the menu operation screen.

The menu screen is displayed.

] appears in the menu, selecting

Operation Guide

Guide for the current operation buttons.

Setting Value

Setting values for the menu items. For menus with sub-menus, values are not displayed.

Scroll Bar

Indicates the scroll position.

Menu Title

Title of the currently displayed menu.

Changing Setting Values

Menu Item to Change

Menu item to be changed. A list of setting values F appears in a pop-up.

Operation Guide

Guide for the current operation buttons.

Setting Values Before Change

Setting values before changing. The background of the item is displayed in blue.

Scroll Bar

Indicates the scroll position.

Cursor

Indicates the selected item. Use the crossshaped button (JK) to move the cursor

List of Setting Values

pop-up displaying a list of setting values for

A selection.

The height of the pop-up depends on the number of settings available.

Cursor

Indicates the selected item. Use the crossshaped button (JK) to move the cursor

Menu Item

Displays the names of the menu item and sub-menu.

items with [...] after them indicates that

there is a sub-menu to access.

Fixed Item

Items that cannot be changed are displayed in gray and cannot be selected.

Basic Operations in Menu Screen

Page 53

Text Input with Software Keyboard

Cancel

Set

Use the software keyboard to enter the [Setup

] subname, [Clip Name Prefix], and the settings

File under [Network] B [Settings]. Use the software keyboard to enter the [Setup File] subname and [Clip Name Prefix].

Entering a subname

(A P80

[ Planning Metadata ] )

Entering the [Clip Name Prefix]

68 [ Clip Name Prefix ] )

(A P

Settings under [Network] B [Settings]

The keyboard displayed varies according to the settings.

(A P

60 [Network Menu] )

Character Entry Field

Field for entering the title.

You can enter up to 8 characters for the [Setup File] subname or up to 4 characters

for the [Clip Name Prefix

Character Cursor

Select

a character using the key cursor D, and

press the Set button (Set) to input the selected character at the position of the character cursor. The character cursor moves to the next position on the right each time a character is input. The cursor can be moved using the arrow keys

Character Keys

Use the cross-shaped button (JKHI) to move the key cursor D to the character you want to enter.

Key Cursor

Indicates the currently selected character or item. Use the cross-shaped button (JKHI) to move the cursor.

Confirmation Buttons

[Set]/[Store] and press the Set button

Select (Set) to confirm the title.

Select

[Cancel] and press the Set button

(Set) to abort character input and return to the previous screen.

[SP] Space Key

Select [SP] and press the Set button (Set) to enter a space at the current position of the

character cursor B.

[3 ] Backspace Key

Select [3 ] and press the Set button (Set) to delete the character to the left of the character cursor B.

Arrow Keys

Moves the position of the character cursor B.

Character Switch Button

Switches the character buttons C to the upper case, lower case, and symbols.

Menu Display and Detailed Settings

Basic Operations in Menu Screen

Page 54

Menu Screen Hierarchical Chart

[Main Menu...]

- [Camera Function...

Image Stabilizer] ........................... (A P 55)

- [

- [Exposure] ..................................... (A P 55)

- [AE Speed] .................................... (A P 55)

- [AE Level] ...................................... (A P 55)

- [Slow Shutter] ................................ (A P 55)

- [AGC Limit] .................................... (A P 55)

- [Gain] ............................................. (A P 55)

- [Shutter] ......................................... (A P 55)

- [Iris] ............................................... (A P 55)

Menu Display and Detailed Settings

- [Night Mode] .................................. (A P 55)

- [Defog] ........................................... (A P 55)

- [Digital Zoom] ................................ (A P 56)

- [Focus Mode] ................................ (A P 56)

- [AF Speed] .................................... (A P 56)

- [Bars] ............................................. (A P 56)

- [Camera Process...] ..........................

Detail] ........................................... (A P 56)

- [

- [High Sensitivity] ............................ (A P 56)

- [NR] ............................................... (A P 56)

- [WDR] ............................................ (A P 56)

- [White Balance...] .......................... (A P 57)

- [

Color Gain] ................................... (A P 57)

- [Color Phase] ................................. (A P 57)

- [Reset Process Settings] ............... (A P 57)

- [Pan/Tilt...] .........................................

- [

Pan/Tilt Preset Speed] .................. (A P 57)

- [Ramp Curve] ................................ (A P 57)

- [Speed With Zoom] ........................ (A P 57)

- [Freeze during Preset] ................... (A P 57)

- [Pan Right Limit] ............................ (A P 57)

- [Pan Left Limit] ............................... (A P 57)

Memo :

Some items are displayed in gray, and they cannot be selected.

Setting value with the R mark is the factory default.

....................................... (A P 54)

] .......................... (A P 55)

(A P 56)

- [AWB Paint

- [R/B Gain] ................................ (A P 57)

menus cannot be set depending on the operating mode or status of the camera recorder. These

] ............................. (A P 57)

(A P 57)

Tilt Up Limit] ................................. (A P 58)

- [

- [Tilt Down Limit] ............................. (A P 58)

- [TC/UB...

- [A/V Set...

- [Network] ...........................................

- [System...] .........................................

] .......................................... (A P 58)

TC Generator] .............................. (A P 58)

- [

- [TC Preset] .................................... (A P 58)

- [UB Mode] ..................................... (A P 58)

- [Drop Frame] ................................. (A P 58)

] ......................................... (A P 59)

- [

Video Set...] .................................. (A P 59)

- [Audio Set...] .................................. (A P 59)

(A P 60)

- [

Connection Setup...] ..................... (A P 60)

- [Web...] .......................................... (A P 60)

- [Live Streaming Set...] ................... (A P 61)

- [Clip Server...] ................................ (A P 63)

- [Metadata Server...] ....................... (A P 64)

- [Import Metadata] .......................... (A P 64)

- [Reset Network Settings] ............... (A P 64)

(A P 65)

System Mode] .............................. (A P 65)

- [

- [Record Set...] ............................... (A P 65)

- [Media] .......................................... (A P 65)

- [Information Display] ...................... (A P 65)

- [Date Style] .................................... (A P 65)

- [Time Style] ................................... (A P 66)

- [IR ID] ............................................ (A P 66)

- [Tally Lamp] ................................... (A P 66)

- [Language] .................................... (A P 66)

- [Reset All] ...................................... (A P 66)

- [Date/Time] .................................... (A P 66)

- [Time Zone] ................................... (A P 66)

- [Install Position] ............................. (A P 67)

- [System Information] ...................... (A P 67)

Menu Screen Hierarchical Chart

Page 55

Camera Function Menu

Menu screen for specifying operation settings during shooting. This item can only be selected in the Camera mode.

Image Stabilizer

For setting whether to enable the image stabilizer. [Setting Values: On, ROff]

Exposure

Select method for controlling the brightness.

Auto: Gain/Shutter/Iris are adjusted automatically.

Shutter Priority: Gain and Iris are adjusted automatically with priority given to the Shutter setting. Shutter speed setting can be adjusted according to the [Shutter

Iris Priority: Gain and Shutter are adjusted automatically with priority given to the Iris setting. Iris setting can be adjusted according to the [Iris] menu

setting.

Manual: Gain/Shutter/Iris setting.

[Setting Values: RAuto, Shutter Priority, Iris Priority, Manual]

AE Speed

For

setting the convergence speed during AE (Auto

Exposure). [Setting Values: Fast, RMiddle, Slow]

AE Level

For setting the convergence level during AE (Auto Exposure). [Setting Values: -6 to +6 (R0)]

Slow Shutter

Setting to “On” enables slow shutter automatically to

increase the sensitivity level when the brightness

of the subject decreases. [Setting Values: ROn, Off]

Memo :

This

item is available only when [Exposure] is set

to “Auto”.

When the subject is dark, the shutter speed slows down to 1/8 (1/6).

] menu setting.

operate according to the menu

AGC Limit

For setting the maximum gain value of which electrically boosts the sensitivity level

according to the brightness automatically. [Setting Values: R48dB, 42dB, 36dB, 30dB, 24dB, 21dB, 18dB, 15dB, 12dB, 9dB]

Gain

For setting the gain value. [Setting Values: 48dB, 42dB, 36dB, 30dB, 24dB, 21dB, 18dB, 15dB, 12dB, 9dB, 6dB, 3dB, R0dB]

Shutter

For specifying shutter-related settings.

When [Main Menu] B [System] B [Record Set] B [Frame Rate] is set to “60p”, “60i” or “30p”:

[Setting values: 1/8, 1/15, 1/30, R1/60, 1/90, 1/100, 1/125, 1/180, 1/250, 1/350, 1/500, 1/725, 1/1000, 1/1500, 1/2000, 1/3000, 1/4000, 1/6000, 1/10000]

When [

Main Menu] B [System] B [Record Set] B [Frame Rate] is set to “50p”, “50i” or “25p”: [Setting values: 1/6, 1/12, 1/25, R1/50, 1/75, 1/100, 1/120, 1/150, 1/215, 1/300, 1/425, 1/600,

1/1000, 1/1250, 1/1750, 1/2500, 1/3500, 1/6000, 1/10000]

Iris

setting the iris value (F number). The value here

For indicates the F number at the wide-angle end of the zoom position. The F number changes with the zoom position. Setting to “CLOSE” closes the iris completely.

[Setting Values: F1.6, F2.0, F2.4, F2.8, F3.4, RF4.0, F4.8, F5.6, F6.8, F8.0, F9.6, F11, F14, CLOSE]

Night Mode

Setting

to “On” increases the sensitivity level under

low-light conditions. [Setting Values: On, ROff]

Defog

When the contrast level decreases such as when the subject is obscured by fog in the surrounding environment, to appear clearer. [Setting Values: High, Middle, Low, ROff]

enabling this mode allows the subject

“AGC”,

Menu Display and Detailed Settings

Camera Function Menu

Page 56

Digital Zoom

For setting whether to enable the digital zoom function.

Off: Enables only the optical zoom (1x to 30x).

On: Enables the dynamic zoom (30x to 360x) in addition to the optical zoom.

[Setting Values: ROff, On]

Focus Mode

For setting the focusing operation. [Setting Values: RAuto, Manual]

AF Speed

For setting the AF operation speed. [Setting Values: RFast, Slow]

Bars

For setting whether to output color bars.

Menu Display and Detailed Settings

[Setting Values: On, ROff]

Memo :

The audio test signals (1 kHz) can be output simultaneously with the color bar output.

(A P59 [ Test Tone ] )

Camera Process Menu

Menu screen for adjusting the quality of camera images.

Detail

For adjusting the contour (detail) enhancement level. Increasing the value increases the sharpness of the contour. [Setting Values: Off, -5 to +5 (R0)]

High Sensitivity

Setting to for a bright screen even in a dimly-lit environment.

[Setting Values: On, ROff]

Memo :

Decreases noise in the image.

[Setting Values: High, RLow, Off]

WDR

For setting the WDR (Wide Dynamic Range) function. When shooting object with wide dynamic range due to backlight conditions, this function compresses the dynamic range while maintaining image contrast through providing gradation compensation to the input video signals.

[Setting Values: Strong, Natural, Weak, ROff]

“On” increases the maximum gain level

Note that increasing the gain level may cause noise to become more noticeable.

High: Applies a strong amount of noise reduction. Low: Applies a weak amount of noise reduction. Off: Disables noise reduction.

Strong: Enhances for object with wide dynamic range due to outdoor or strong backlight conditions. Natural: Normal setting for wide dynamic range. Weak: Reduces the effect of gradation compensation compared to the normal setting. Off: Sets the wide dynamic range function to “Off”.

the effect of gradation compensation

Camera Function Menu

Page 57

White Balance

For setting the white balance mode.

FAW: Switches the camera to the Automatic White Balance mode. The white balance is automatically adjusted according to the color temperature of the lighting on the object.

AWB: Pressing

adjusts the white balance.

5600K: Sets white balance to a color temperature of 5600K.

3200K: Sets white balance to a color temperature of 3200K.

Manual: For adjusting the white balance manually.

[Setting Values: RFAW, AWB, 5600K, 3200K, Manual]

* For details, refer to “[Adjusting the White

Balance] (A P

For during AWB.

Increase the number: Strengthens the red/blue.

Decrease the number: Weakens the red/blue.

[Setting values: R: -32 to +32 (R0); B: -32 to +32 (R0)]

For setting the R Gain and B Gain values respectively. [Setting values: R: 0 to 255; B: 0 to 255]

Color Gain

For adjusting the video signal color level. Increasing the value deepens the color. [Setting Values: Off, -4 to +10 (R0)]

Memo :

Images are displayed in black-and-white when this is set to

Color Phase

For setting the color phase. [Setting Values: -5 to +5 (R0)]

Reset Process Settings

Restores all items in the to their default settings.

the [AWB Trigger] button automatically

45)”.

AWB Paint

adjusting the R (red) and B (blue) components

R/B Gain

“Off”.

[Camera Process] menu

Pan/Tilt Menu

Pan/Tilt Preset Speed

For setting the speed for moving to the pan/tilt position configured in the Preset mode. [Setting Values: 1 to 30]

Ramp Curve

For setting how you want the movement to slow down

when moving to the position configured in the

Preset mode.

Linear: Stops after reducing speed at a fixed rate.

Ease: Reduces speed gradually before coming to a smooth stop.

[Setting Values: Linear, REase]

Speed With Zoom

Setting to “On” reduces the speed of pan/tilt movement

Tele end. [Setting Values: ROn, Off]

Freeze during Preset

Setting to “On” displays the video image before movement

after preset starts until the camera has reached the registered position. [Setting Values: On, ROff]

Memo :

Pan Right Limit/Pan Left Limit

Sets pan operation. Selecting Set sets the current position as the pan limit. Movement beyond this point is not allowed. Selecting Release releases the restriction. [Setting Values: Set, RRelease]

Memo :

further as the camera zooms toward the

starts as a still image during the interval

This feature can be enabled for preset pan/tilt/ zoom operations.

a limit on the horizontal (left/right) range of the

The operation speed varies depending on whether is used. When an AC adapter is used During PoE+ power supply : Maximum 400°/S

an AC adapter or a PoE+ power supply

: Maximum 480°/S

Menu Display and Detailed Settings

Camera Process Menu

Page 58

Tilt Up Limit/Tilt Down Limit

Sets a limit on the vertical (up/down) range of the tilt operation. Selecting Set sets the current

as the tilt limit. Movement beyond this point

position is not allowed. Selecting Release releases the restriction. [Setting Values: Set, RRelease]

Memo :

The operation speed varies depending on whether is used. When an AC adapter is used During PoE+ power supply : Maximum 200°/S

an AC adapter or a PoE+ power supply

: Maximum 300°/S

TC/UB Menu

Menu screen for setting time code and user’s bit.

Menu Display and Detailed Settings

This item cannot be selected while recording is in progress.

TC Generator

For setting the operation of the time code.

Free Run: The time code operates in the run mode at all times regardless of the recording status. It continues to run even when the power of the camera recorder is turned off.

Rec Run: The time code operates in the run mode during recording. It continues to run in the order of the recorded clips as long as the microSD card is not replaced. If the microSD card is removed and recording is made on another card, time code will be recorded on the new card from where it was left off in the previous card.

Regen: The time code operates in the run mode during recording. When the microSD card is replaced, the last time code recorded on the card is read and recorded on a new card so that the time code continues in running order.

[Setting Values: Free Run, RRec Run, Regen]

TC Preset

For setting the time code (hour, minute, second, frame).

Display : Drop setting 02:02:25.20

Memo :

When [TC/UB] B [TC Generator] is set to “Regen”, and cannot be selected.

Non Drop setting 02:02:25:20

the parameter is displayed as “Regen”

UB Mode

For setting the recording mode of the user’s bit.

Date: Records the date.

Time: Records the time.

Preset: Records according to the preset setting.

[Setting the User’s Bit] )

(A P50

[Setting Values: Date, Time, RPreset]

Memo :

If UB Mode is set to operates in the 24-hour format even if the LCD

display on the web browser (Live View) screen or screen of the externally connected monitor is in the 12-hour format.

Preset

For setting the user’s bit. (Digit by digit) Display

Memo :

For setting the framing mode of the time code generator.

[Setting Values: Non Drop, RDrop]

Memo :

: AB CD EF 01

(A P50 [Presetting the User’s Bit] )

When [UB Mode] is set to item appears as “---” and preset is disabled.

When [TC/UB] B [TC Generator] is set to “Regen”, and cannot be selected.

Drop Frame

Non Drop: Internal time code generator works in the nondrop-frame emphasis on the number of frames.

Drop: Internal time code generator works in the dropframe mode. Use this setting when placing emphasis on the recording time.

This item can be set only when [System] B [Record Set] B [Record Format] B [Frame Rate] is set to “60p”, “30p”, or “60i”. When [Frame Rate] is “50p”, “25p”, or “50i”, this item appears as “---” and cannot be selected.

(A P

the parameter is displayed as “Regen”

67 [ Frame Rate ] )

“Time”, the user’s bit

“Date” or “Time”, this

mode. Use this setting when placing

[Main Menu] B

Pan/Tilt Menu

Page 59

A/V Set Menu

Menu screen for video output and audio.

Video Set...

For specifying video output-related settings.

(A P59 [Video Set Item] )

Audio Set...

For specifying audio-related settings.

(A P59 [Audio Set Item] )

Video Set Item

HDMI/SDI Out

For setting the terminal to output the video. [Setting Values: RHDMI+SDI, SDI, HDMI]

Resolution

For

selecting the resolution of video output from the

[HDMI] terminal or [SDI OUT] terminal according to the monitor to be connected.

When SDI or HDMI+SDI is selected 1080p mode: 1080/60p, 1080/50p, 1080/60i, 1080/50i, 1080/30p, 1080/25p 720p mode: 720/60p, 720/50p

For HDMI 1080p mode: Auto, 1080/60p, 1080/50p, 1080/60i, 1080/50i, 1080/30p, 1080/25p 720p mode: Auto, 720/60p, 720/50p

Memo :

The selectable options vary according to the setting in [System] B [System Mode].

Cross conversion output is not possible.

HDMI Color

For setting the color format of HDMI signals.

This item is selectable when set to “HDMI” or “HDMI+SDI”.

[Setting Values: RGB, RAuto]

HDMI Enhance

For setting the color range of HDMI signals. When connecting to a PC monitor, set this to

On”.

“

This item is selectable when set to “HDMI” or “HDMI+SDI”.

[Setting Values: On, ROff]

[HDMI/SDI Out] is

HDMI TC

For setting whether to superimpose time code to the [HDMI] terminal.

[Setting Values: On, ROff]

Memo :

[Main Menu] B [A/V Set] B [Video Set] B

When [HDMI/SDI Out] is set to “SDI”, [HDMI TC] is fixed at “Off” and cannot be selected.

Set to “Off” if connecting to a device that does not support HDMI TC.

3G-SDI Mapping

For setting the 3G-SDI mapping structure. [Setting Values: RLevel A, Level B]

Memo :

Available when [Resolution] is set to “1080/60p” or “1080/50p”.

When [HDMI/SDI appears as “---” and cannot be selected.

[Main Menu] B [System] B

Out] is set to “HDMI”, this item

Audio Set Item

Audio

For setting whether to input audio sound. [Setting Values: On, ROff]

Input Mode

For setting the audio input mode. [Setting Values: RUnbalanced Stereo, Balanced Mono]

Input Select

Select the audio sound to input to the [AUDIO IN] terminal.

[Setting Values: RLine, Mic, Mic +2.5 V]

Audio Gain

For setting the audio input level. [Setting Values: RHigh, Low]

Equalizer

For setting the sound quality. [Setting Values: Speech Enhancement, Low Cut, ROff]

Test Tone

For specifying whether to output the audio test signals (1 kHz) during color bar output. [Setting Values: On, ROff]

Menu Display and Detailed Settings

A/V Set Menu

Page 60

Network Menu

For specifying network-related settings. The display of the software keyboard for input varies according to the item you are setting.

(A P53 [Text Input with Software Keyboard] )

Connection Setup

For configuring the network connection settings. You can Load, Store, and Delete the settings specified on the

Memo :

Configure a different network address (network segment) for the LAN terminal and USB terminal.

LAN Wizard

Displays a network via the [LAN] terminal. Follow the instructions on the screen.

Menu Display and Detailed Settings

USB Wizard

Displays a the network via the [USB] terminal. Follow the instructions on the screen.

Load

Loads the settings on the

(A P95 [Reading the Connection Settings File] )

Store

Saves the settings on the

(A P94 [Saving the Connection Settings File] )

Delete

Deletes the saved settings.

95 [Deleting Connection Settings] )

(A P

Default Gateway

For selecting whether to use the default gateway setting for the LAN or USB terminal. Select the terminal network access. [Setting Values: RLAN, USB]

FTP Proxy

For setting the FTP proxy.

Type: Select the type of FTP proxy. [Setting values: HTTP, RNo Proxy]

Server: Set the FTP proxy server name.

[USB Wizard] screen.

[Wizard] screen for connecting to the

[USB Wizard] screen for connecting to

[USB Wizard] screen.

that is connected to the router for external

Memo :

Enter the name using the onscreen keyboard.

You can enter characters not more than 127 bytes using single-byte alphanumeric characters (a to z, 0 to 9), single-byte hyphen (“-”) or dot (“.”).

When [Type cannot be made.

Port: Set the FTP proxy port number.

Memo :

Enter the name using the onscreen keyboard.

Enter an integer between 1 and 65535.

APN

For setting the APN (Access Point Name) for network connection using a cellular adapter.

* This item is grayed out and cannot be selected

if APN cannot be set for the adapter attached.

Caution :

The APN setting is written into the cellular adapter, not this camera recorder. Setting a wrong APN may result in communication failure or expensive bills from the

telecommunications company. Set the APN

correctly.

(A P78 [Connecting via Cellular Adapter (USB)] )

Web

For setting the functions that make use of the web browser.

Web Access

To access via a web browser, set to [Setting Values: ROn, Off]

Camera Name

For setting the name to be displayed on the web browser. Enter not more than 8 characters using the software keyboard. (Default value: PZ100)

The login name is

Changes the password for accessing via a web browser. The current password is displayed. Enter a new password directly. Enter not more than 31 characters using the software keyboard.

When RM-LP100 is in use, change the password setting for RM-LP100 at the same time.

] is set to “No Proxy”, changes

“On”.

“jvc”. It cannot be changed.

Network Menu

Page 61

Resolution

For setting the resolution on the Live View screen. [Setting values: R640x360, 320x180]

Live Streaming Set

For specifying settings for distributing live video images.

Live Streaming

Starts live distribution when “On” is selected. [Setting Values: On, ROff]

Memo :

“On” cannot be selected if streaming is not possible

and bitrate combination.

“On” cannot be selected if network connection is not established.

“On” cannot be selected when FTP is running.

Switches automatically to OFF mode.

For selecting the terminal for live streaming. [Setting Values: RLAN, USB]

For selecting the server for live streaming. [Setting Values: RServer1, Server2, Server3, Server4]

Memo :

The setting cannot be changed during live streaming (Live Streaming set to

For setting the server for live streaming. Memo :

The setting cannot be changed during live streaming (Live Streaming set to

* The name that is set in [Alias] is displayed

individually.

Alias For setting a name to distinguish the settings of this camera. The Streaming Server options.

* The default value is “Server1/Server2/Server3/

Server4”.

* You can enter up to 31 characters and ASCII

characters.

with the selected resolution, frame rate

“Off” in the VIDEO

Interface

Server

“On”).

Streaming Server

“On”).

Server1/Server2/Server3/Server4

name set in this item will be displayed in the

Type For setting the system to transfer videos for distribution. [Setting Values: RMPEG2-TS/UDP, MPEG2TS/RTP, RTSP/RTP, ZIXI, RTMP]

Memo :

Use reception devices that are compatible with the respective transfer systems.

To use the needed separately.

The following items that can be set vary depending on the setting of this item.

Destination Address For setting details such as the host name and the

* Enter not more than 127 characters using

single-byte

9), single-byte hyphen [-], or dot [.].

Destination URL For entering the URL of the live distribution destination beginning with

There is no default value (blank).

* You can enter up to 191 characters and ASCII

characters.

Destination Port Enter the network port number of the live distribution destination using an integer between 1 and 65535. When [Type

“MPEG2-TS/RTP”, the default value is “6504”. If “ZIXI” is set, the default value is “2088”.

Memo :

When [ even numbers from 2 to 65530 can be specified

for the port number.

When [Type] is set to [SMPTE 2022-1 FEC] is set to “On”, N+2 and N +4 port numbers are also used in addition to the

specified port number (N).

Stream ID For setting the registered stream ID of the live distribution destination. The

* Enter not more than 63 characters.

Stream Key Enter the stream key specified at the live transmission destination. There is no default value (blank).

* Enter not more than 63 characters.

“ZIXI” setting, a dedicated server is

IP address of the live distribution destination.

alphanumeric characters (a to z, 0 to

“rtmp://”.

] is set to “MPEG2-TS/UDP” or

Type] is set to “MPEG2-TS/RTP”, only

“MPEG2-TS/RTP” and

default value varies with the product model.

Menu Display and Detailed Settings

Network Menu

Page 62

Password For setting the password. There is no default value (blank).

* Enter not more than 127 characters. Enter not

than 31 characters for RTSP/RTP setting.

Latency For setting the latency mode. [Setting values: Minimun(ZIXI Off), RLow, Medium, High]

Adaptive Bit Rate If “On” is selected, the bit rate setting value of

live streaming is set to maximum limit, and the bit rate is changed automatically according to changes in the network bandwidth.

[Setting Values: On, ROff]

Memo :

[Adaptive Bit Rate set to “ZIXI” and [Latency] is set to a value other than “Minimun(ZIXI Off)”.

* The bit rate is displayed on the status screen

Menu Display and Detailed Settings

only when

SMPTE 2022-1 FEC Set to “On” to use FEC (Forward Error

Correction).

transmission system that recovers the missing

A packets in the decoding process without having to retransmit the missing packets.

[Setting Values: On, ROff]

* The decoder must be compatible with SMPTE

2022-1.

FEC Matrix For setting the amount of FEC (Forward Error Correction) overhead for configuring SMPTE2022-1.

(A P100

Memo :

[Setting the FEC Matrix] )

This item is selectable only when 2022-1 FEC] is set to “On”.

] is selectable when [Type] is

“On” is set.

[SMPTE

Resolution

For

setting the resolution of the video image during live distribution. The selectable options vary according to the System Mode setting.

System Mode

1080/60 1080/50

720/60 720/50

Frame Rate

setting the frame rate of the video image during

For live distribution. The selectable options vary according to the settings in [System Mode] and [Resolution] .

System Mode Resolution Setting Value 1080/60 1080/50 50p, 50i, 25p

720/60 1280x720 720/50 50p, 25p

Memo :

The setting cannot be changed during live streaming (Live Streaming set to

Bit Rate

setting the bitrate of the video image during live

For distribution. The selectable options vary according to the settings in [System Mode], [Resolution] and

[Frame Rate]. For details on the settings, please refer to [[Live Streaming Set] Combinations that Support Distribution] (A P 98).

Memo :

The setting cannot be changed during live streaming (Live Streaming set to

Depending and the connection, the images and audio sound during live streaming can be choppy.

1920x1080 1280x720 640x360

640x360

on the type of network adapter used

Setting Value

(R: default value)

R1920x1080 1280x720 640x360 R1280x720 640x360

60p, 60i, 30p

60p, 30p

“On”).

Network Menu

Page 63

Clip Server

For setting the server and directory for uploading recorded clips in the microSD card to the FTP server.

Clip-FTP1 to Clip-FTP4 (The name specified in the respective [Alias

] items is displayed)

Alias For setting a name to distinguish the settings of this camera recorder. The

name set in this item will appear on the [FTP

Upload] action screen of the clip list display.

* Enter not more than 31 characters.

Protocol For setting the protocol of the FTP server to be connected.

FTP: Protocol that does not encrypt the incoming and outgoing data.

SFTP: Protocol that encrypts incoming and outgoing data using SSH.

FTPS: Protocol data using SSL or TLS. It uses an implicit mode (starts encrypted communication once connection starts).

FTPES: Protocol that encrypts incoming and outgoing data using SSL or TLS. It uses an explicit mode (starts encrypted communication after permission is granted).

ZIXI: Select this item when transferring files via the ZIXI server.

[Setting Values: RFTP, SFTP, FTPS, FTPES, ZIXI]

Memo :

To use the needed separately.

If “ZIXI

Server For setting the server name (“mystation.com”,

etc.) or the IP address (“192.168.0.1”, etc.) of the FTP server.

* Enter not more than 127 characters using

single-byte

9), single-byte hyphen [-], or dot [.].

that encrypts incoming and outgoing

“ZIXI” setting, a dedicated server is

” is set, the resume function is enabled.

alphanumeric characters (a to z, 0 to

Port Enter the FTP server port number to use using an integer between 1 and 65535. The default value varies with the Protocol setting. (FTP: 21, SFTP: 22, FTPS: 990, FTPES: 21, ZIXI: 2088)

Dir. Path Enter the path name for the directory to upload to (“/pub

”, “/home/user”, etc.)

* Enter not more than 127 characters.

Username Enter the user name for connecting to the FTP server.

* Enter not more than 31 characters.

Password Enter the password for connecting to the FTP server.

* Enter not more than 31 characters. When

[Protocol] is set to “ZIXI”, enter not more than 127 characters.

PASV Mode For setting whether to set the communication

used for file transfer to the passive mode.

mode Set to “On” if the camera is inside a firewall, and

a connection from the FTP server to the camera cannot be established. [Setting Values: On, ROff]

Memo :

When [Protocol] is set to “SFTP item appears as “---” and cannot be selected.

” or “ZIXI”, this

Menu Display and Detailed Settings

Network Menu

Page 64

Metadata Server

For registering the FTP server for importing the metadata and the path of the file to be imported. Up to 4 settings can be registered.

Meta-FTP1 to Meta-FTP4 (The name specified in the respective [Alias

] items is displayed)

Alias For setting a name to distinguish the settings of this camera recorder. The

name set in this item will be displayed in the

[Import Metadata] options.

* Enter not more than 31 characters.

Protocol For setting the protocol of the FTP server to be connected.

FTP: Protocol that does not encrypt the incoming and outgoing data.

Menu Display and Detailed Settings

SFTP: Protocol data using SSH.

FTPS: Protocol that encrypts incoming and outgoing data using SSL or TLS. It uses an implicit mode (starts encrypted communication once connection starts).

FTPES: Protocol that encrypts incoming and outgoing data using SSL or TLS. It uses an explicit mode (starts encrypted communication after permission is granted).

[Setting Values: RFTP, SFTP, FTPS, FTPES]

Server For setting the server name (“mystation.com”,

etc.) or the IP address (“192.168.0.1”, etc.) of the FTP server.

* Enter not more than 127 characters using

single-byte

9), single-byte hyphen [-], or dot [.].

that encrypts incoming and outgoing

alphanumeric characters (a to z, 0 to

Port Enter the FTP server port number to use using an integer between 1 and 65535. The default value varies with the Protocol setting. (FTP: 21, SFTP: 22, FTPS: 990, FTPES: 21)

File Path Enter

the path name for the metadata file (“/pub/

meta.xml”, “/home/user/meta2.xml”, etc.)

* Enter not more than 127 characters.

Username Enter the user name for connecting to the FTP server.

* Enter not more than 31 characters.

Password Enter the password for connecting to the FTP server.

* Enter not more than 31 characters.

PASV Mode For setting whether to set the communication

used for file transfer to the passive mode.

mode Set to “On” if the camera is inside a firewall, and

a connection from the FTP server to the camera cannot be established. [Setting Values: On, ROff]

Memo :

When [Protocol] is set to “SFTP appears as “---” and cannot be selected.

Import Metadata

For importing metadata from the FTP server.

Metadata loaded by the setup files will be deleted.

Memo :

option is not available when [Network] is set

This to “Off”.

Reset Network Settings

Restores all items in the default settings.

[Network] menu to their

”, this item

Network Menu

Page 65

System Menu

This menu screen allows system-related settings. For specifying recording settings, formatting and restoring time, time zone, and other settings. It can also be used to reset the menu settings to their default values.

For selecting the resolution and frame rate. [Setting Values: 1080/60, 1080/50, 720/60, 720/50]

Memo :

For specifying recorded video-related settings.

For formatting (initializing) an microSD card. Select [Format] from [Cancel]/[

the Set button (Set) to start formatting (initializing).

For restoring a microSD card. Press the Set button (Set) to start restoring the microSD card.

Memo :

of microSD card, tally lamp setting, date/

System Mode

The settings cannot be changed during recording or streaming.

Record Set...

(A P

67 [Record Set Item] )

Media

Format Media

Format], and press

(A P28 [Formatting (Initializing) microSD Cards] )

Restore Media

[Restoring the microSD Card] )

(A P28

This item appears only when a microSD card has

been inserted. However, it is not selectable

when recording in the Camera mode.

Information Display

For setting whether to display information such as the camera status, microSD card information and time code over the video image on the screen of the externally connected monitor or the web browser (Live View) screen. [Setting Values: R]On, Off]

Output

For setting where to output the display when [Information Display] is set to

All: Displays information on all screens (web browser (Live View) screen and video/live streaming screen).

Video/Live Streaming: Displays screen.

Web: Displays information on the web browser (Live View) screen.

[Setting Values: All, Video/Live Streaming, RWeb]

For setting the way to display the zoom position when [Information Display

Number: Displays the zoom position in numbers (0-99).

Bar: Displays the zoom position in a bar.

[Setting Values: Number, RBar]

For setting whether to display the time code (TC) or user’s bit (UB) on the web browser (Live View) screen or screen of an externally connected monitor when [

[Setting Values: UB, RTC]

Date Style

For the web browser (Live View) screen or screen of an externally connected monitor as well as the date of the time stamp recording when [Information

Display] is set to “On”. Display examples of the setting values are as

follows.

DMY2: 30 Jun 2016

DMY1: 30-06-2016

MDY2: Jun 30, 2016

MDY1: 06-30-2016

YMD: 2016-06-30 [Setting Values: DMY2, DMY1, MDY1, MDY2, YMD] (Default values: MDY2 (U model), DMY1 (E model))

information on the video/live streaming

Zoom

TC/UB

Information Display] is set to “On”.

setting the sequence for displaying the date on

“On”.

] is set to “On”.

Menu Display and Detailed Settings

System Menu

Page 66

Time Style

For setting the time display on the web browser (Live View) screen and externally connected monitor screen as well as that for time stamp recording. [Setting Values: 24hour, 12hour] (Default values: 12hour (U model), 24hour (E model))

IR ID

For selecting a camera ID when operating via an infrared remote control unit. [Setting Values: CAM3, CAM2, RCAM1]

Tally Lamp

setting whether to light up the tally lamp during

For external control, recording or live streaming.

External: Lights up during external control.

Rec/Live Streaming: Lights up during recording or live streaming.

Menu Display and Detailed Settings

Live Streaming: Lights up during live streaming. Does not light up during recording.

Rec: Lights up during recording.

Off: Turns off the indicator.

[Setting Values: RExternal, Rec/Live Streaming, Live Streaming, Rec, Off]

Memo : Depending on the setting, the lamp might appear

such as when there is insufficient space on

blinking the microSD card during recording or when a communication error occurs during live streaming.

(A P25 [Tally Lamp] )

Reset All

Resets all menu settings. Memo :

[Date/Time

(A P (A P66 [ Time Zone ] )

This item is not available during recording in the

Camera mode or during live streaming.

Date/Time

setting the year, month, day, hour, and minute.

For Memo :

The

follows the setting in [Display Settings] B [Date

Style]. However, the 24-hour format is used for

the hour display regardless of the [Time Style]

setting.

(A P65

Time Zone

For setting the UTC time difference in units of 30 minutes. [Setting Values: UTC-12:00-UTC-00:30, UTC, UTC+00:30-UTC+14:00 (in 30 min increments)] (Default values: UTC-05:00 (U model), UTC (E model))

Memo :

If [Date/Time

item is automatically adjusted when [Time

Zone] is altered.

] and [Time Zone] cannot be reset.

66 [ Date/Time ] )

display order of the date (year, month, day)

[ Date Style ] )

] is already set, the [Date/Time]

Brightness

For setting the brightness of the tally lamp. Selecting “High” increases the brightness level to

the maximum. [Setting Values: RHigh, Middle, Low]

Language

Switches between languages in the menu screen. [Setting Values: REnglish, Français, Español] (U model) [Setting values: REnglish, Français, Deutsch, Italiano, Español, P model)

System Menu

усский, Türkçe, 中文(简)] (E

Page 67

Install Position

For selecting the location to install the camera.

Desktop: When the camera is mounted on top of a table or to a tripod. The output image is not inverted vertically or laterally.

Hanging:

the camera is mounted to the ceiling. The

When output image will be inverted both vertically and laterally.

[Setting Values: RDesktop, Hanging]

System Information

Version

Displays information on the firmware version.

DIP SW

Displays surface of the camera.

Memo :

Displays the license for the open source software used by this camera recorder.

the status of the DIP switch on the bottom

Left DIP SW 1 to Left DIP SW 8: [Displayed Value: On, Off] Right DIP SW 1 to Right DIP SW 7: [Displayed Value: On, Off]

The On/Off setting cannot be altered in the menu. Turn on/off the DIP switch manually.

(A P23

[DIP Switch Setting] )

Open Source License

Record Set Item

Frame Rate

System Mode

1080/60 60p, R60i, 30p 1080/50 50p, 50i, 25p 720/60 60p, 30p 720/50 50p, 25p

Memo :

The selectable options for Frame Rate vary

according to the

Bit Rate

System

Mode 1080/60 60p 1080/50 50p 1080/60 60i 1080/50 50i 1080/60 30p 1080/50 25p 720/60 60p 35M, 18M 720/50 50p 720/60 30p 720/50 25p

Memo :

The selectable options for Bit Rate vary according to the

Rate] settings.

[System Mode] setting.

Frame Rate

[System Mode] and [Frame

Setting Value

(R: default value)

Setting Value

(R: default value)

50M, 28M

50M, R35M, 18M, 5M

50M, 35M, 18M

18M, 5M

Menu Display and Detailed Settings

System Menu

Page 68

Loop Rec

For setting whether to enable the loop recording mode.

51 [Loop Recording] )

(A P

[Setting Values: On, ROff]

Memo :

The setting cannot be altered during recording.

4GB File Spanning(SDXC)

recording file is automatically split when the size

A exceeds 4 GB, but if a microSDXC card is used, you can record clips larger than 4 GB by setting this option to “Off”. (Up to a maximum of 64 GB or 4

hours)

On: Splits

a file when it exceeds 4 GB or 30 minutes.

Off: Splits a file when it exceeds 64 GB or 4 hours.

[Setting Values: ROn, Off]

Memo :

Menu Display and Detailed Settings

When [Loop Rec] is set to Spanning(SDXC)] is also automatically set to “On”.

To use a microSDHC card, set Spanning(SDXC)] to “On”.

This

option is only valid if the microSD card used

for recording is of the SDXC format.

LPCM

For setting the audio recording format. [Setting Values: Dual Mono, RStereo]

Time Stamp

For setting whether to display shooting date/time information in the recorded video. [Setting Values: On, ROff]

Memo :

The date/time display style can be changed in [Main Menu

Style].

(A P (A P66 [ Time Style ] )

] B [System] B [Date Style]/[Time

65 [ Date Style ] )

“On”, [4GB File

[4GB File

Clip Set

Clip Name Prefix

For setting the first four characters of the name of the clip file to be recorded to the microSD card.

any of the 36 characters including alphabets

Enter (upper case) and numbers (0 to 9) using the software keyboard.

(A P53 [Text Input with Software Keyboard] )

[Setting Values: xxxG] (The default value of xxx is the last three digits of the serial number.)

Memo :

setting will not be applied to the name of the

This clip file, but will be recorded as a display name for the clips that appear in the clip list.

Reset Clip Number

For assigning a new number (Clip Number) by resetting it (0001). Select [Reset] and press the Set button (Set) to

reset the number. When other clips exist on the microSD card, the smallest available number is used after reset.

Example: If [Clip Name Prefix

“ABCD0001” already exists on the microSD card, “ABCD0002” will be assigned.

Clear Planning Metadata

Erases the planning metadata.

] is “ABCD”, and

System Menu

Page 69

Display Screen in Camera

100min

1/10000

F1.8

18dB

AE+6

12 :34 : 56

Jan 24 ,2016

00: 00:00.00

4030 20 10 0

5 6

※

K J

4030 20 10 0

Mode

This screen displays the event. It is also used to display warnings only.

* Displayed

Remaining Space on Media

Displays the remaining recording time on the microSD card.

!INVALID

!FORMAT : microSD card requires

!INCORRECT

!REC INH :

The following icons are displayed during FTP upload. (A P83 [Uploading a Recorded Video Clip] )

only when a microSD card is inserted

: When a microSD card

writing/reading error has occurred, or when the microSD card is unrepairable.

formatting.

Incompatible microSD card format.

When a microSDHC card is inserted while

[4GB File Spanning(SDXC)] is set to “Off”.

(A P

68 [ 4GB File Spanning(SDXC) ] )

Icon Status

FTP transfer is in progress.

Three images are alternately displayed, and the arrows become animated. In this case, instead of the remaining recordable

time on the microSD card, an estimated value of the remaining transfer time is displayed.

Error has occurred during FTP

(Yellow)

transfer.

Audio Level Meter

Set [Audio] to “On” or “Off

” to display or hide

the level meter respectively.

White Balance Mode

Displays the current white balance mode.

<FAW> : When setting FAW <AWB> : When setting AWB <3200K> : When the color temperature is set

to 3200 K

<5600K> : When the color temperature is set

to 5600K

<MANUAL> : When manual setting is selected

(A P57 [ White Balance ] )

Shutter

Displays the current shutter speed when the [Exposure

] selection button is set to “Shutter”

or “Manual”.

(A P55

When the [Exposure] selection button is set

[ Shutter ] )

to “Auto” or “Iris”, the shutter switches to the auto mode and the shutter speed is not

Display/Status Screen

displayed.

Memo :

The variable range of the shutter speed varies according to the video format settings.

[Setting the Electronic Shutter] )

(A P44

Iris F-Number

Displays F-number of the lens iris. (A P42

[Adjusting the Iris] )

Memo :

A a icon appears on the left side of the lens aperture value (F-number) during Auto Iris mode.

Display Screen in Camera Mode

Page 70

00:00:00:00

※

FF EE DD 20

Gain

Displays the gain value.

An a icon is displayed to the left when [Exposure

] is set to a value other than

“Manual”.

AE Level

Displayed

Focus Display

[AF]

when the AE function is activated.

: When auto focus is selected

[MF]ZZ : When manual focus is selected

* ZZ: indicates the focal length

Focusing position is 0 = Near end Focusing position is 99 = Far end

* When manual focus is selected, pressing the

[Push Auto

] button each time changes the focal

length value.

Image stabilizer mark

Displayed when the image stabilizer is ON.

Date/Time Display

Displays the current date and time.

Memo :

The date/time display style can be specified in [Main Menu] B [System] B [Information

Display/Status Screen

Display] B [Date Style]/[Time Style].

(A P

65 [ Date Style ] )

(A P66 [ Time Style ] )

This item is not displayed when [Main Menu] B [System] B [Information Display] is set to “Off”.

(A P

66 [ Date/Time ] )

Zoom Display

Displays the zoom position. (Zoom bar or value)

Digital zoom off:

Digital zoom on:

The zoom bar will only be displayed for 3 seconds after the zoom operation is activated.

The value will always be displayed. Value: Z00 to 99 Digital zoom off : Z00 to 99 Digital zoom on

: Z100 to 149

Memo :

You can specify the display method (Number/ Bar) in [Main Menu] B [System] B [Information

] B “Zoom”.

Display

Time Code (I)/User’s Bit (J) Display

Displays the time code (hour: minute: second:

frame) or user’s bit data recorded in

the microSD card being played back.

Example of time code display:

* Colon (:) denotes non-drop frames and dot (.)

denotes drop frames.

Example of user’s bit display:

Display Screen in Camera Mode

Memo :

You can specify whether to display the time code, user’s bit, or turn off the display in [Main

Menu] B [System] B [Information Display] B [TC/UB]. This item will not be displayed when

“Off” is

selected.

(A P

65 [ TC/UB ] )

Page 71

Live streaming mark

When [Main Menu] B [Network] B [

Live

Streaming Set] B [Live Streaming] is set to “On”, the distribution status is displayed. (A P61 [ Live Streaming ] )

Icon Status

Distribution in progress (good

connection quality)

(Red)

Distribution in progress (poor

connection quality)

(Red)

Connection pending or connection failed

(Yellow)

Event/Warning Display Area

Displays error messages. (A P

101 [Error Messages and Actions] )

Media Status

---- : No card found in the slot STBY : Recording standby RREC : Recording

Loop Rec

Displayed while loop recording is in progress.

Display/Status Screen

Display Screen in Camera Mode

Page 72

Status Screen

For checking the settings of the camera recorder. * These are screen examples. The contents

displayed are different depending on the settings.

LAN Screen

For viewing information related to the network of the [LAN] terminal.

(A P

88 [Changing LAN Connection Settings] )

USB Screen

Display/Status Screen

For viewing information related to the network of the [USB

] terminal.

(A P89 [Changing USB Connection Settings] )

Live Streaming Screen

For viewing information related to live streaming.

[Performing Live Streaming] )

(A P97

Planning Metadata Screen

For checking the current planning metadata setting.

P80 [ Planning Metadata ] )

Status Screen

Page 73

Connecting External Monitor

output live video images and audio sound to

To an external monitor, select the output signals from the camera, and connect using an appropriate cable according to the monitor to be used.

Choose the most suitable terminal according to the monitor in use.

[SDI OUT] terminal: Outputs 3G-SDI/HD-SDI signals.

[HDMI] terminal: Outputs HDMI signals.

Memo :

SDI OUT] terminal or [HDMI] terminal is

If the [ connected, configure the settings in the [A/V Set] menu according to the monitor to be connected.

(A P59

[ HDMI/SDI Out ] )

To display the menu screen or display screen on the external monitor, set [System] B

[Information Display] to “On” and [Output] to “All”.

Connecting via SDI

Digital video signals, together with embedded (superimposed) audio signals and time code signals, are output for the 3G-SDI/HD-SDI signals.

Memo :

The sampling frequency for embedded (superimposed) audio signals is 48 kHz. Time code of the built-in time code generator is also output.

Connecting External Devices

Connecting External Monitor

Page 74

Functions of Network Connection

network feature is able to function by using

The the [LAN] terminal at the back of the unit or by

connecting one of the following adapters to the [USB] terminal.

Wireless LAN adapter

Ethernet adapter

Cellular adapter

(A P75

[Connecting to Network via [LAN]

Terminal] ) (A P75 [Connecting to Network via [USB]

Terminal] )

List of Functions

View Remote

You can access via a web browser on a PC to check the live image or remotely control the camera.

Clip Metadata You can access the page for editing the metadata via a web browser on a PC, and display or rewrite the metadata that is recorded to a clip.

P81 [ Clip Metadata ] )

Loading and Saving Setup Files

You can save the camera settings to devices such as a PC, or load the settings that you have saved on a camera.

96 [Loading and Saving Setup Files] )

(A P

Firmware Update

You can update the version of the firmware on the camera. please visit our corporate website (URL on the cover page).

Changing Network Connection Settings

For details on how to update the firmware,

(A P87 [Changing Settings] )

Live streaming

By combining with the decoder or PC application

supports live streaming, you can perform audio

that and video streaming via the network.

(A P97 [Performing Live Streaming] )

Importing Metadata

You can download a metadata settings file (XML

Connecting to the Network

from the FTP server and store metadata in

format) the camera recorder.

(A P78 [Importing Metadata] )

Uploading Recorded Clips

You can upload clips recorded in the microSD card to a preset FTP server.

P83 [Uploading a Recorded Video Clip] )

Deleting Recorded Clips

You can delete clips that are recorded in a microSD card.

85 [Deleting Recorded Clips] )

(A P

Editing Metadata

Planning Metadata

can access the page for editing the camera

You recorder’s metadata via a web browser on a PC, and edit the metadata that is to be applied to clips to be recorded.

(A P80 [ Planning Metadata ] )

Network Connection

Operating Environment

Operation has been verified for the following environments.

Computer

OS: Windows 7 Web browser: Google Chrome

OS: Windows 10 Web browser: Google Chrome

OS: Mac OS X 10.11 Web browser: Safari

Functions of Network Connection

Page 75

Connecting to Network via [LAN]

DHCP

Back Next

Manual

IP Address Configuration

Terminal

Connect the [LAN] terminal of the camera

devices such as a PC or the RM-LP100

with using a LAN cable.

Configure the connection settings.

Select [Main Menu [Connection Setup] B [LAN Wizard] and press the Set button (Set).

Pressing the button displays a network setting screen.

Follow the screen instructions to complete setting. Perform setting for the following.

IP address setting (DHCP or manual)

IP Address

Subnet mask

Default gateway

DNS Server

Memo :

an address is manually assigned in a NAT

When environment, it is also necessary to set the default gateway correctly besides conversion of the address at the router’s end in order to perform operations such as access to the Internet from an external network via the router.

Setting is complete.

After setting is complete, you can access the camera recorder via a web browser.

87 [Changing Settings] )

(A P

] B [Network] B

Connecting to Network via [USB] Terminal

Connect an appropriate adapter according

the intended use to the [USB] terminal at

to the rear of the camera recorder.

The following adapters can be connected.

Wireless LAN adapter

Ethernet adapter

Cellular adapter

Memo :

Only a network connection adapter can be connected to the

Connect have turned off the power of the camera recorder.

You can find the latest information on the compatible adapters at the product page of our website.

Configure the connection settings.

Select [Main Menu [Connection Setup] B [USB Wizard] and press the Set button (Set).

A wizard screen appears according to the type of adapter connected. Follow the instructions

(A P76 [Connecting via Wireless LAN (USB)] ) (A P77 [Connecting via Ethernet Adapter (USB)] ) (A P78 [Connecting via Cellular Adapter (USB)] )

Memo :

When the menu is displayed on the Live View screen via the USB terminal, starting the USB wizard

disconnects the network and the display will not be updated. Use the LAN terminal or video/audio output terminals such as the HDMI or SDI output terminal.

[USB] terminal.

or disconnect an adapter only after you

] B [Network] B

on the screen to perform setting.

Connecting to the Network

Network Connection

Page 76

Connecting via Wireless LAN (USB)

Back Next

Wireless LAN

Available Adapter

Back Next

Connect with Access Point

P2P

Select Connection Type

Back Next

Wireless LAN

Available Adapter

Back Next

Connect with Access Point

P2P

Select Connection Type

Connection via Access Point

Perform setting on the camera recorder, and start up the

(A P

75 [Connecting to Network via [USB]

[USB Wizard] screen.

Terminal] )

[Wireless LAN] appears on the [USB

] screen.

Wizard

Press the I button to display the Connection Type] screen.

Select “Connect with Access Point”. Follow the screen instructions to complete

setting. Perform setting for the following.

Mode of connection

Method of setting * SSID, type of encryption, Passphrase, and IP Address setting (“DHCP

cases other than WPS

Connecting to the Network

[Select

” or “Manual”) in

P2P Connection

For direct access to the network feature of the camera from a PC.

[Wireless LAN] appears on the [Wizard] screen.

Press the I button to display the

[Select

Connection Type] screen.

Select “P2P”. Follow the screen instructions to complete

setting. Perform setting for the following.

Mode of connection

Method of setting * SSID and Passphrase in cases other than WPS

Setting is complete.

After setting is complete, you can access the camera recorder via a web browser.

87 [Changing Settings] )

(A P

Network Connection

Memo :

When “WPS

” is selected in the [Select Setup

Type] screen, the following steps 3 and 4 are not required.

Display the [USB] screen of the status screen.

Press the [MENU] button on the infrared remote control twice to display the status

screen. Press the cross-shaped button (HI) to display the

Check to ensure that the [SSID] and [

Passphrase] that you have set in the wizard

[USB] screen.

are displayed.

Page 77

Back Next

Ethernet

Available Adapter

DHCP

Back Next

Manual

IP Address Configuration

From the list of PC access points, select

] and enter [Passphrase].

[SSID

Display the list of access points in the wireless connection settings of the PC and select

“PZ100-*****”. (***** are numbers that

vary with the device used.)

After the password confirmation screen appears, enter the [Passphrase

] displayed

on the [USB] screen.

Setting is complete.

After setting is complete, you can access the camera recorder via a web browser.

87 [Changing Settings] )

(A P

Connecting via Ethernet Adapter (USB)

Connect a PC to the camera directly using a crossover cable or via devices such as an Ethernet hub to access the network feature of the camera.

Connect the Ethernet adapter that is connected to the [USB]

camera to the PC using a LAN cable.

terminal of the

Perform setting on the camera recorder, and start up the

(A P

75 [Connecting to Network via [USB]

[Wizard] screen.

Terminal] )

[Ethernet] appears on the [Wizard] screen.

Press the I button to display the

[IP

Address Configuration] screen.

Follow the screen instructions to complete setting. Perform setting for the following.

IP address setting (DHCP or manual)

IP Address

Subnet mask

Default gateway

DNS Server

Memo :

an address is manually assigned in a NAT

Setting is complete.

After setting is complete, you can access the camera recorder via a web browser.

87 [Changing Settings] )

(A P

Connecting to the Network

Network Connection

Page 78

Connecting via Cellular Adapter (USB)

Back

Celluar

Available Adapter

<?xml version="1.0" encoding="UTF-8"?> <NRT-MetaInterface lastUpdate="2015-01-29T18:06:21+09:00" xmlns="urn:schemas-proHD:nonRealTimeMetaInterface:ver.1.00" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"> <MetaData> <Title1>Title1 sample</Title1>  <Title2>Title2 sample</Title2>  <Description>Description sample</Description>  <Creator>Creator sample</Creator>  </MetaData> </NRT-MetaInterface>

You can make use of the FTP function and live streaming to this camera recorder.

Caution :

Connecting to the Network

function by connecting a cellular adapter

Perform setting on the camera recorder, and start up the

(A P75

[Connecting to Network via [USB]

[Wizard] screen.

Terminal] )

[Cellular] appears on the [Wizard] screen.

Press the I button.

Follow the screen instructions to complete setting. Perform setting for the following.

Connection phone number

User name

Password

Note that you may have to pay very high bills in the case of pay-per-use contracts. Fixed price contract is recommended if you are using the network function. Note

that the use of improper settings may result in expensive bills from the phone service provider. Make sure that the setting is correct. To avoid expensive bills due to the roaming connection, you are recommended to use this function by disabling the roaming contract. There may be communication even when you are not using the network function. Remove the cellular adapter when the function is not in use.

Importing Metadata

You can download a metadata settings file (XML

from the FTP server and store metadata in

format) the camera recorder. The imported metadata is applied to clips to be recorded.

Preparing Metadata

You can record the four metadata types below.

Title1 : ASCII

Title2 : UNICODE, max. 127 bytes Creator : UNICODE, max. 127 bytes Description : UNICODE, max. 2047 bytes

Metadata makes use of the XML description format.

Edit the <Title1><Title2><Description><Creator> tag element using the XML editor. (Indicated by the frames below)

only, max. 63 characters

(bytes)

Network Connection

Page 79

Configuring the Server for Downloading

Meta-FTP4...

Meta-FTP3...

Meta-FTP2...

Meta-FTP1...

Metadata Server

Username

File Path

Port

Server

Protocol

Alias

Metadata Server Set

Import Metadata

For specifying the settings (server name, user name, password, etc.) for connecting to the FTP

for downloading the metadata as well as the

server path of the file to download.

Open the [Metadata Server] screen.

Open the [Main Menu] B [ [Metadata Server] screen.

Select a server using the cross-shaped button (JK),

and press the Set button (Set). The server settings screen appears. Perform setting for each item.

Up to 4 settings can be registered.

(A P64 [ Metadata Server ] )

Network] B

Importing Metadata

Download the metadata settings file (XML format) from the FTP server.

Select [Main Menu] B [ Metadata] and press the Set button (Set).

The [Import Metadata] screen appears.

Select the server for importing the metadata.

The name that is registered in Server] B [Alias] is displayed.

Select a server using the cross-shaped button (JK),

and press the Set button (Set).

Network] B [Import

[Metadata

Memo :

For

details on the registered information, please

consult the network administrator for the server.

Connecting to the Network

Importing Metadata

Page 80

Importing...

Cancel

Import

Import Metadata?

Select [Import] on and press the Set button (Set).

Import starts. After

import is complete, the display is restored

to the screen before the [Import Metadata] screen appears.

Memo :

You cannot exit the menu or perform recording while import is in progress.

import of the metadata failed, “Import Error!” is

If displayed, and a message indicating the cause

Connecting to the Network

of the error appears. Press the Set button (Set) to return to the [Import

Metadata] screen in step 1.

(A P

101 [List of FTP Transfer Errors] )

When “HTTP Proxy] screen of the network connection setting, connections to the servers other than “FTP” protocol cannot be made.

If a setting other than “FTP [Protocol], to ensure the safety of the communication path, a screen appears

prompting you to validate the fingerprint of the public key and certificate received from the server. Check to ensure that the displayed value coincides with the known value.

the confirmation screen,

” is selected in the [Select FTP

” is specified for

Editing Metadata

Planning Metadata

Access the page for editing the camera’s metadata via a web browser on a PC, and edit the metadata that is to be applied to clips to be recorded.

Display the web setting screen.

Press the Setting button on the web browser screen of the PC to display the setting screen.

Click the [Planning Metadata] button to open the

[Planning Metadata] screen.

Importing Metadata

Page 81

Renewal of planning metadata is

succeeded.

Edit the metadata.

Enter information for the necessary fields.

input is complete, click [Save] to overwrite

After the metadata.

Click [OK] on the confirmation screen.

Update of the [Planning Metadata

After update is complete, “Renewal of planning metadata is succeeded.” displayed. Click [OK].

Returns to the screen in step 3.

Memo :

update failed, “Renewal of planning metadata

is failed.” is displayed. Click [Close] to return to the screen of 3.

] starts.

Clip Metadata

Access the page for editing the metadata via a web browser on a PC, and display or rewrite the metadata that is recorded to a clip.

Display the web setting screen.

Press the Setting button on the web browser screen of the PC to display the setting screen.

Display the clip list.

Click the [Clip list] tab to display the clip list.

Set the camera recorder to the “Remote Edit Mode

”.

You will see a message indicating

“It is

necessary to change the camera mode to "Remote Edit Mode". Change the mode.”

on the web browser.

Connecting to the Network

Editing Metadata

Page 82

4 5

Renewal of clip metadata is

succeeded.

[Change] to switch the camera to the

Click Remote Edit mode.

Memo :

When the menu or status is displayed, display of the confirmation screen will be put on hold.

the menu is displayed on the camera recorder,

close the menu.

If the status is displayed on the camera recorder, close the status display.

When FTP upload via the camera unit is currently in progress, switching to the Remote Edit mode is disabled.

Select the Metadata Edit mode.

Select the [Meta data] tab.

Select the clip to rewrite the metadata.

A list of the recorded clips appears on the [Clip list] screen.

Click

on the clip for which you want to rewrite

the metadata.

Connecting to the Network

Edit the metadata of the selected clips.

Edit the information for the necessary fields.

can click the [OK Mark] to add an OK mark

You to or delete it from the selected clips.

After editing is complete, click [Save] to overwrite the metadata.

Click [OK] on the confirmation screen.

Update of the metadata starts.

After update is complete, “Renewal of clip metadata is succeeded.” is displayed. Click [

OK].

Returns to the screen in step 4.

Memo :

If update failed, “Renewal of clip metadata is failed.” is displayed. Click [Close] to return to the screen of 4.

Memo :

You

can use the [J-30] or [K+30] tab to jump to

the previous or next 30 clips on the list.

Editing Metadata

Page 83

Uploading a Recorded

Video Clip

You can upload clips recorded in the microSD card to a preset FTP server.

can upload selected clips, all clips, or those

You appended with an OK mark.

Configuring the FTP Server for Uploading

(A P91 [Changing Clip Server Settings] )

Uploading Video Clips

Display the web setting screen.

Press the Setting button on the web browser screen to display the setting screen.

Display the clip list.

Click the [Clip list] tab on the setting screen to display the clip list.

You will see a message indicating necessary to change the camera mode

to "Remote Edit Mode". Change the mode.” on the web browser.

Click [Change] to switch the camera to the Remote Edit mode.

Select the selection mode.

Press the Select button.

Select the clip you want to upload.

A list of the recorded clips appears on the

] screen.

[Clip list

Click on the clip you want to upload to make a selection.

Clips

being selected are indicated by a check

mark.

Memo :

You can use the [J-30] or [K+30] tab to jump to the previous or next 30 clips on the list.

Select the upload operation.

Click the [Actions] button.

“It is

Connecting to the Network

Set the camera recorder to the “Remote Edit Mode

”.

Uploading a Recorded Video Clip

Page 84

A B C

Select the clip server and start uploading.

selecting the server to upoload clips to,

Upon an upload screen appears.

status of the transfer process is indicated

The by a progress bar.

Select a method to upload the clips.

Upload all clips Uploads all the clips in the displayed slots.

Click to move to the [Clip Server] screen.

Upload OK clips

Connecting to the Network

Uploads all clips in the displayed slots that are appended with an OK mark. Click to move to the [Clip Server] screen.

Upload selected clips Uploads the clips you have selected.

Click to move to the [Clip Server] screen.

Deselect All Clears all clip selection and returns to the

[Clip List] screen.

Memo :

stop transfer, click the [Stop] button. Clicking [Yes] on the confirmation screen stops the transfer halfway and brings you back to the main

page.

If there already exists a file on the FTP server with

a name identical to the file to be transferred, a confirmation screen asking to overwrite the file will appear. However, if “HTTP” is selected in the [Select

FTP Proxy] screen of the network connection settings, an overwrite confirmation screen does

not appear, and the existing file will be overwritten directly.

When “HTTP Proxy] screen of the network connection setting, the overwrite confirmation window will not be

displayed and the existing file is overwritten.

When same name on the server with a file size smaller than the file to be transferred, the file on the server will be regarded as an interrupted file during a FTP transfer. A confirmation screen to resume transfer (append writing) appears.

If “Resume” is selected, FTP transfer is carried out such that it appends from the position where

it was interrupted. When FTP transfer ends normally, “Complete”

appears on the screen.

After browser operations are disabled until uploading is complete.

” is selected in the [Select FTP

FTP transfer starts and there is a file of the

uploading in step 8 has started, other web

Uploading a Recorded Video Clip

Page 85

Cause of Error

If a setting other than “FTP” is specified for [Protocol], to ensure the safety of the communication path, a screen appears

prompting you to validate the fingerprint of the public key and certificate received from the server. Check to ensure that the displayed value coincides with the known value.

Fingerprint is a unique value that varies with each public key and certificate.

For details of the fingerprint, please consult the administrator of the server to be connected.

(A P63

When “HTTP” is selected in the [Select FTP

[ Clip Server ] )

Proxy] screen of the network connection setting, connections to the servers other than “FTP” protocol cannot be made.

Upload is complete.

After upload is complete,

“Successfully

Completed.” appears on the screen.

Deleting Recorded Clips

can delete clips that are recorded in a microSD

You card.

Display the web setting screen.

Press the Setting button on the web browser screen to display the setting screen.

Display the clip list.

Click the [Clip list] tab on the setting screen to display the clip list.

When clips are not uploaded successfully, the following errors are displayed.

(A P

101 [List of FTP Transfer Errors] )

Memo :

“[List of FTP Transfer Errors] (A P 101)”

to clear the error message.

Set the camera recorder to the “Remote Edit Mode

”.

You will see a message indicating necessary to change the camera mode

to "Remote Edit Mode". Change the mode.” on the web browser.

Uploading a Recorded Video Clip

Connecting to the Network

“It is

Page 86

A B C

Click [Change] to switch the camera to the Remote Edit mode.

Select the selection mode.

Press the Select button.

Select the clips you want to delete.

A list of the recorded clips appears on the

Clip list] screen.

[

Click on the clip you want to delete to make a selection.

Clips

being selected are indicated by a check

mark.

Memo :

can use the [J-30] or [K+30] tab to jump to

You the previous or next 30 clips on the list.

Choose a delete action.

Click the [Actions] button.

Connecting to the Network

Select a way to delete the clips.

Delete selected clips

Deletes only the selected clips.

Delete all clips

Deletes all the clips in the displayed slots.

Deselect All

Clears all clip selection and returns to the list] screen.

Start clip deletion.

Press the [OK] button

to start deleting the clips.

The status of the deletion process is indicated by a progress bar.

Memo :

stop deletion, click the [Stop] button. Clicking

To [Yes] on the confirmation screen stops the deletion halfway and brings you back to the main

page.

After deletion in 8 has started, other web browser

operations are disabled until deletion is

complete.

Deletion is complete.

After deletion is complete,

“Successfully

Completed.” appears on the screen.

[Clip

Deleting Recorded Clips

Page 87

Changing Settings

You can change the network-related settings by accessing via a web browser on a PC.

Display the web setting screen.

Press the Setting button on the web browser screen of the PC to display the setting screen.

Select an item for which you want to change the setting from the

Set each of the items as follows.

[Settings] screen.

Connection Setup

For specifying connection settings that are common

Connection Setup (LAN)

For changing the connection settings for the LAN terminal.

Connection Setup (USB)

For changing the connection settings for the USB terminal.

Metadata Server

Settings on the server for importing the metadata. Setting can be performed in the same way as the Metadata Server menu on the camera recorder. The latest settings are reflected, regardless of whether they are specified via the camera recorder or web operation.

Clip Server

Settings for the server to upload recorded clips to. Setting can be performed in the same way as the [Clip Server] menu on the camera recorder.

The latest settings are reflected, regardless of whether they are specified via the camera recorder or web operation.

Live Streaming

Setting for streaming audio and video via the network. The latest settings are reflected, regardless of whether they are specified via the camera recorder or web operation.

Memo :

Priority is given to menu operation on the camera recorder.

When the menu on the camera recorder is opened while the

using a web browser, a warning appears, after which the display returns to the main screen.

While the menu is displayed on the camera recorder, the

opened via the web browser.

between the LAN and USB terminals.

[Settings] screen is opened

[Settings] screen cannot be

Connecting to the Network

Changing Settings

Page 88

Changing Common LAN/USB

Connection Settings

For specifying network settings that are common between the LAN and USB terminals.

Changing LAN Connection Settings

You can change the settings for each of the preset items on the

recorder.

[LAN Wizard] screen of the camera

Default Gateway

For selecting whether to use the default gateway setting for the LAN or USB terminal. Select LAN if the router for connecting to an

network is located at the LAN terminal.

external Select USB if you want to access an external network via an adapter that is connected to the USB terminal. If you are connecting a cellular adapter to the USB terminal, select USB.

FTP Proxy

Select HTTP if you are using a proxy for FTP transfer.

FTP Proxy Settings

For setting the server name and port number if you are using an FTP proxy.

Camera Name

For setting the camera name that appears at the bottom left corner of the Live View screen.

* Enter not more than 8 characters using

Connecting to the Network

single-byte alphanumeric characters (a to z,

to 9), single-byte hyphen [-], underscore [_]

0 or space [ ].

[OK]/

[Cancel] Button

For saving the settings or canceling the action.

DHCP

For selecting whether to use DHCP or not. If you are using DHCP, select

the [OK] button. The following items will be grayed out when “On” is selected, and input is not required.

If you are not using DHCP, select Off, input accordingly for the following items and press the [OK] button.

IP Address

For entering the IP address of the camera.

Subnet Mask

For entering the subnet mask of the camera.

Gateway (Optional)

For entering the gateway address. (Optional)

DNS1 (Optional)

For entering the primary DNS server address. (Optional)

DNS2 (Optional)

For entering the secondary DNS server address. (Optional)

[OK]/[Cancel] Button

After changing of settings is complete, click the [OK] button.

“On” and press

Changing Settings

Page 89

Changing USB Connection Settings

C D

You can change the settings for each of the preset items on the [USB Wizard] screen of the camera

recorder.

Items that cannot be changed are grayed out according the mode of connection.

Type of Adapter Connected

Mode of Wireless LAN Connection

[Search Access Point] Button

Click to display a list of the detected access points. A check mark (c ) appears at the beginning of the access point that is currently selected.

to the type of adapter connected and

For configuring information required for connecting to a wireless LAN access point.

IP Address Configuration

When “DHCP grayed out.

Settings when using cellular adapter

[OK]/[Cancel] Button

After changing of settings is complete, click the [OK] button.

Clicking [Execute] on the confirmation screen changes the settings on the camera and

restarts the network.

Memo :

You can run the setting screen is displayed by connecting to

the network using the LAN terminal or when it is displayed via an access point by connecting to the network using the USB terminal.

” is selected, all items will be

[Search Access Point] only when

Connecting to the Network

Changing Settings

Page 90

Changing Metadata Server Settings

E G

You can make direct changes to the FTP server for importing the metadata that is specified in [Metadata

as the path of the file to import.

Connecting to the Network

Server] on the [Settings] screen, as well

Server

For selecting the FTP server.

Alias

setting a name to distinguish the settings of

For this camera recorder. The name set in this item will be displayed in the [Import Metadata] options.

* Enter not more than 31 characters.

Protocol

For setting the protocol of the FTP server to be connected.

FTP: Protocol that does not encrypt the incoming and outgoing data.

SFTP: Protocol that encrypts incoming and outgoing data using SSH.

FTPS: Protocol that encrypts incoming and outgoing data using SSL or TLS. It uses an implicit mode (starts encrypted communication once connection starts).

FTPES: Protocol that encrypts incoming and outgoing data using SSL or TLS. It uses an explicit mode (starts encrypted communication after permission is granted).

Server

For setting the server name (“mystation.com”, etc.) or the IP address (“192.168.0.1 the FTP server.

* Enter not more than 127 characters using

single-byte alphanumeric characters (a to z, 0 to 9), single-byte hyphen

Port

Enter the FTP server port number to use using an integer between 1 and 65535. The default value varies with the Protocol setting. (FTP: 21, SFTP: 22, FTPS: 990, FTPES: 21)

File Path

Enter the path name for the metadata file (“/pub/ meta.xml”, “/home/user/meta2.xml”, etc.)

* Enter not more than 127 characters.

Username

Enter the user name for connecting to the FTP server.

* Enter not more than 31 characters.

Password

Enter the password for connecting to the FTP server.

* Enter not more than 31 characters.

Passive Mode

For setting whether to set the communication

used for file transfer to the passive mode.

mode Set to “On” if the camera is inside a firewall, and

a connection from the FTP server to the camera cannot be established. [Setting Values: On, ROff]

Memo :

When [Protocol] is set to appears as “---” and cannot be selected.

[Save

]/[Cancel] Button

For saving the settings or canceling the action.

“SFTP”, this item

”, etc.) of

[-], or dot [.].

Changing Settings

Page 91

Changing Clip Server Settings

E G

You can make direct changes to the server and directory settings that are specified in [Clip

Server] on the [Settings] screen for uploading recorded clips in the microSD card to the FTP

server.

Server

For selecting the FTP server.

Alias

setting a name to distinguish the settings of

For this camera recorder. The name set in this item will appear on the [FTP

Upload] action screen of the clip list display.

* Enter not more than 31 characters.

Protocol

For setting the protocol of the FTP server to be connected.

FTP: Protocol that does not encrypt the incoming and outgoing data.

SFTP: Protocol that encrypts incoming and outgoing data using SSH.

FTPS: Protocol that encrypts incoming and outgoing data using SSL or TLS. It uses an implicit mode (starts encrypted communication once connection starts).

FTPES: Protocol that encrypts incoming and outgoing data using SSL or TLS. It uses an explicit mode (starts encrypted communication after permission is granted).

ZIXI:

this item when transferring files via the

Select ZIXI server.

[Setting Values: RFTP, SFTP, FTPS, FTPES, ZIXI]

Memo :

To use the “ZIXI” setting, a dedicated server is needed separately.

If “ZIXI” is set, the resume function is enabled.

Server

For setting the server name (“mystation.com”, etc.) or the IP address (“192.168.0.1 the FTP server.

* Enter not more than 127 characters using

single-byte alphanumeric characters (a to z, 0 to 9), single-byte hyphen

Port

Enter the FTP server port number to use using an integer between 1 and 65535. The default value varies with the Protocol setting. (FTP: 21, SFTP: 22, FTPS: 990, FTPES: 21, ZIXI: 2088)

Dir. Path

Enter the path name for the directory to upload to (“/pub”, “/home/user

* Enter not more than 127 characters.

Username

Enter the user name for connecting to the FTP server.

* Enter not more than 31 characters.

Password

Enter the password for connecting to the FTP server.

* Enter not more than 31 characters.

Passive Mode

For setting whether to set the communication

used for file transfer to the passive mode.

mode Set to “On” if the camera is inside a firewall, and

a connection from the FTP server to the camera cannot be established. [Setting Values: On, ROff]

Memo :

When [Protocol] is set to appears as “---” and cannot be selected.

[Save

]/[Cancel] Button

For saving the settings or canceling the action.

”, etc.)

“SFTP”, this item

”, etc.) of

[-], or dot [.].

Connecting to the Network

Changing Settings

Page 92

Changing Live Streaming Settings

E G

You can make direct changes to information on the destination of distribution that is specified in

Streaming] on the [Settings] screen.

Server

For selecting the server for live streaming.

Destination Server

the Select button if you want to configure

Press a server at the receiving end of the live distribution.

Alias

Connecting to the Network

For setting a name to distinguish the settings of this camera. The name set in this item will be displayed in the [Server] options.

* The default value is “Server1”/“Server2”/

“Server3”/“Server4”.

can enter up to 31 characters and ASCII

* You

characters.

Type

For setting the system to transfer videos for distribution.

Memo :

Use reception devices that are compatible with the respective transfer systems.

To use the needed separately.

The following items that can be set vary depending on the setting of this item.

“ZIXI” setting, a dedicated server is

Changing Settings

[Live

Address

For setting details such as the host name and the IP address of the live distribution destination.

* Enter not more than 127 characters using

single-byte alphanumeric characters (a to z, 0 to 9), single-byte hyphen

Port

Enter the network port number of the live distribution destination using an integer between 1 and 65535. When [Type] is set to “UDP” (MPEG2-TS/UDP)

or “RTP” (MPEG2-TS/RTP), the default value is “6504”. If “ZIXI” is set, the default value is “2088”.

SMPTE 2022-1 FEC

Set to “On” to use FEC (Forward Error Correction).

A transmission system that recovers the missing packets in the decoding process without having to retransmit the missing packets.

* The decoder must be compatible with

SMPTE 2022-1.

FEC Matrix

For setting the amount of FEC (Forward Error Correction) overhead for configuring SMPTE2022-1.

* Setting range

4 ≦ L ≦ 20 (Default value: L = 10)

4 ≦ D ≦ 20 (Default value: D = 10)

L × D ≦ 100 (Default value: L×D = 10×10)

Memo :

This item is selectable only when 2022-1 FEC] is set to “On”.

Increasing the amount of FEC overhead increases the packet loss resilience but more network bandwidth is used.

Even with the same amount of overhead, increasing the L value will increase the packet loss (continuous packet loss) resilience.

Stream ID

For setting the registered stream ID of the live distribution destination. The

default value varies with the product model.

* Enter not more than 63 characters.

Password

For setting the [Stream ID] password. There is no default value (blank).

* Enter not more than 127 characters.

[-], or dot [.].

[SMPTE

Page 93

Latency

For setting the latency mode.

Adaptive Bit Rate

If “On

” is selected, the bit rate setting value of

live streaming is set to maximum limit, and the bit rate is changed automatically according to changes in the network bandwidth.

Memo :

[Adaptive Bit Rate set to “ZIXI” and [Latency] is set to a value other than “Minimun(ZIXI Off)”.

* The bit rate is displayed on the status screen

only when “On” is set.

URL

For entering the URL of the live distribution destination beginning with “rtmp://”.

There is no default value (blank).

can enter up to 191 characters and ASCII

* You

characters.

Stream Key

Enter the stream key specified at the live transmission destination. There is no default value (blank).

* Enter not more than 63 characters.

]/[Cancel] Button

[Save

For saving the settings or canceling the action.

] is selectable when [Type] is

Managing the Network Connection Settings File

This camera recorder allows you to save the network connection settings on the

screen to the camera recorder unit. Loading a saved connecting settings file enables you to reproduce the appropriate network connection state speedily.

Memo :

To save or retrieve the connection settings, go to [Main Menu] B [Network] B [

Setup].

The following operations can be performed on the [Connection Setup] menu.

[Saving the Connection Settings File] (A P

94)

[Reading the Connection Settings File] (A P 95)

[Deleting Connection Settings] (A P 95)

Number of Storable Setup Files

Camera recorder : [CAM1] to [CAM4]

[USB Wizard]

Connection

Changing Settings

Connecting to the Network

Page 94

Saving the Connection Settings File

:KAMAKURA

Cancel

Overwrite

CAM3

Setup?

Overwrite Connection

Storing...

Select [Main Menu] B [Network] B [Connection Setup button (Set).

Select [Store] and press the Set button (Set).

Select the file you want to save as a new file (or overwrite an existing file) using the cross-shaped button (JK), and press the Set button (Set).

Connecting to the Network

Name the file.

Enter the subname using the software keyboard.

53 [Text Input with Software Keyboard] )

(A P

Memo :

When overwriting an existing file, the subname of the existing file is displayed.

Select [Cancel], and press the Set button (Set) to return to the previous screen.

] and press the Set

Select [Store] and press the Set button (Set).

Save the file.

A confirmation screen appears when you choose to overwrite. Select [Overwrite] on the confirmation

screen, and press the Set button (Set).

starts, and “Storing...” appears on the

Saving screen.

Saving

starts, and “Storing...” appears on the

screen when the file is newly saved.

Saving is complete.

After saving of the file is complete, “Complete” appears on the screen, and the menu screen

closes automatically.

Managing the Network Connection Settings File

Page 95

Reading the Connection Settings File

Deleting Connection Settings

Select [Main Menu] B [Network] B [Connection Setup

] and press the Set

button (Set).

Select [Load] and press the Set button (Set).

Select the file to load using the crossshaped button (JK), and press the Set button (Set).

Select [Load] on the confirmation screen, and press the Set button (Set).

Loading starts, and “Loading...” appears screen.

on the

Select [Main Menu] B [

Network] B

[Connection Setup] and press the Set button (Set).

Select [Delete] and press the Set button (Set).

Select the file to delete using the crossshaped button (JK), and press the Set button (Set).

Select [Delete] on the confirmation screen, and press the Set button (Set).

Deletion starts, and “Deleting...”

appears on the

screen.

Connecting to the Network

Reading is complete.

After reading of the file is complete, “Complete appears on the screen, and the menu screen

closes automatically.

Deletion is complete.

”

After file deletion is complete, “Complete” appears on the screen.

Managing the Network Connection Settings File

Page 96

Loading and Saving Setup Files

You can load the setup file to the camera (upload)

save it to a PC (download) from the Maintenance

or page on the web browser screen. A “Camera mode will be changed to "Maintenance

Mode". During "Maintenance Mode", functions of the camera are stopped.” message appears.

Click [Change] to switch the camera to the Maintenance mode.

Loading (Uploading) Setup Files

Press the [Setup File] button.

Pressing the button switches to setup file upload/download mode.

Press the [Choose setup file to upload.

Pressing the button displays a file selection dialog box. Select the file you want to upload. After a file has been selected, the name of the loaded file appears in

“----” appears if no file has been loaded.

Connecting to the Network

Press the [Upload] button to start uploading of the file.

Pressing the button displays a “OK”/“Cancel” confirmation message.

File] button to select the

“Upload File Name :”.

Press the [OK] button.

Pressing the button starts uploading of the file. Progress of the uploading process is shown at the bottom of the screen.

After uploading is complete, a message screen

appears.

Press the [OK] button.

Pressing the button restarts the camera.

Saving (Downloading) Setup Files

Press the [Setup File] button.

Pressing the button switches to setup file upload/download mode.

Press the [Download] button to start downloading of the file.

The file will be saved to the predetermined download folder.

dialog box prompting you to save the file may

A appear depending on the browser that you are using. Specify the destination to save the downloaded file.

Loading and Saving Setup Files

Page 97

Performing Live Streaming

By combining with the decoder or PC application

supports live streaming, you can perform audio

that and video streaming via the network.

Supported Formats

Video

H.264 1920x1080 (59.94p/50p) 20/16/12/8Mbps (Max) 1920x1080 (59.94i/50i) 20/16/12/8/5/3Mbps (Max) 1920x1080 (29.97p/25p) 20/16/12/8/5/3Mbps (Max) 1280x720 (59.94p/50p) 20/16/12/8/5/3Mbps (Max) 1280x720 (29.97p/25p) 8/5/3/1.5Mbps (Max) 640x360 (29.97p/25p) 3/1.5/0.8/0.3Mbps (Max)

Memo :

Depending and the connection, the images and audio sound during live streaming can be choppy.

Audio

AAC

Supported Protocols

MPEG2-TS/UDP MPEG2-TS/RTP RTSP/RTP ZIXI RTMP

on the type of network adapter used

Setting Distribution

Select the terminal for live streaming.

Specify the settings in [Main B [Interface]. (A P61 [ Interface ] )

Set the Resolution and Frame & Bit Rate for the video to be distributed.

Specify the settings in [Main B [Live Streaming Set]. (A P61 [ Live Streaming Set ] ) For more information on the live streaming

settings, please refer to [[Live Streaming Set] Combinations that Support Distribution]

(A P 98).

Specify the distribution protocol and related items.

Specify the distribution protocol and related items in [Main Menu] B [Network] B [Live

Streaming Set] B [Streaming Server]. (A P61

[ Streaming Server ] )

Select the server for live streaming.

Select the distribution server in [Main Menu] B

Network] B [Live Streaming Set] B [Server].

[ (A P61 [ Server ] )

Menu] B [Network]

Connecting to the Network

Performing Live Streaming

Page 98

[Live Streaming Set] Combinations that Support Distribution

c* c*

c*c*c

c c c c c

c c c*

cc*

cccc

c ccc

c*c c c c c

c c c*

cc*

cccc

c ccc

c c c

c c*

cc*

cccc

c ccc

cccc cc

cccccc cccc cc cccccc cccccc

20 Mbps

60p, 50p

1920 x 1080

60i, 50i, 30p, 25p 60p, 50p

1280 x 720

30p, 25p 30p, 25p

640 x 360

MPEG2-TS/UDP

MPEG2-TS/RTP

RTSP

ZIXI(*1)

ZIXI(*2)

RTMP

MPEG2-TS/UDP

MPEG2-TS/RTP

RTSP

ZIXI(*1)

ZIXI(*2)

RTMP

MPEG2-TS/UDP

MPEG2-TS/RTP

RTSP

ZIXI(*1)

ZIXI(*2)

RTMP

MPEG2-TS/UDP

MPEG2-TS/RTP

RTSP

ZIXI(*1)

ZIXI(*2)

RTMP

MPEG2-TS/UDP

MPEG2-TS/RTP

RTSP

ZIXI(*1)

ZIXI(*2)

RTMP

16 Mbps

12 Mbps

8 Mbps

5 Mbps

3 Mbps

1.5 Mbps

0.8 Mbps

0.3 Mbps

Frame Rate

Resolution

Ty p e

Bitrate

cccc

ccc

c c cc*cc

ccc

c cc*cc

c c c

ccccc*cc

cccc cc

cccc cc cccc cc cccccc cccccc

60p, 50p

1920 x 1080

60i, 50i, 30p, 25p 60p, 50p

1280 x 720

30p, 25p 30p, 25p

640 x 360

MPEG2-TS/UDP

MPEG2-TS/RTP

RTSP

ZIXI(*1)

ZIXI(*2)

RTMP

MPEG2-TS/UDP

MPEG2-TS/RTP

RTSP

ZIXI(*1)

ZIXI(*2)

RTMP

MPEG2-TS/UDP

MPEG2-TS/RTP

RTSP

ZIXI(*1)

ZIXI(*2)

RTMP

MPEG2-TS/UDP

MPEG2-TS/RTP

RTSP

ZIXI(*1)

ZIXI(*2)

RTMP

MPEG2-TS/UDP

MPEG2-TS/RTP

RTSP

ZIXI(*1)

ZIXI(*2)

RTMP

12 Mbps

8 Mbps

5 Mbps

3 Mbps

1.5 Mbps

0.8 Mbps

0.3 Mbps

Frame Rate

Resolution

Ty p e

Bitrate

LAN terminal

Supports distribution

c* : Supports distribution (Depending on factors such as the type of device connected and the network

environment, images and audio sound during live streaming may be choppy. When this occurs, try lowering the bit rate setting.)

*1 When [Latency] is set to a value other than “Low”

When [Latency] is set to “Low”

USB terminal

Connecting to the Network

Supports distribution

c* : Supports distribution (Depending on factors such as the type of device connected and the network

environment, images and audio sound during live streaming may be choppy. When this occurs, try lowering the bit rate setting.)

*1 When [Latency] is set to a value other than “Low”

When [Latency] is set to “Low”

Memo :

The settings cannot be changed during live streaming (when

Depending on the type of network adapter used and the connection, images and audio sound during live streaming may be choppy.

Performing Live Streaming

[Streaming] is set to “On”).

Page 99

Starting Distribution

Cause of Error

Perform the necessary setting for the decoder and PC application.

For details on the settings, please refer to the “INSTRUCTIONS” of the respective devices and applications.

Memo :

If there is an NAT router within the communication path between the camera and the decoder, port forwarding setup is required. For details on the settings, please refer to the “INSTRUCTIONS” of the router in use.

The following parameters are required when connecting to this camera recorder using the RTSP/RTP. Port number: 554 Stream ID: stream

Use the following to access via URL. rtsp://<IP stream

With the network connection established, set

(A P

address of the camera recorder>:554/

[Live Streaming] to “On”.

36 [Live streaming On/Off button] )

Set [Main Menu] B [Network] B [Live Streaming Set] B [Live Streaming] to “On”.

Memo :

You can check the status of distribution on the status screen.

[Live Streaming Screen] )

(A P72

Icon Status

Distribution in progress (good

(Red)

connection quality) Blinks when distribution starts or stops

Distribution in progress (poor

connection quality)

(Red)

Waiting for connection (during RTSP/RTP) or connection failed

(Yellow)

When the 5 icon

is displayed, you can view the

details of the error on the [Live Streaming] screen of the status screen.

103 [List of Live Streaming Error Displays] )

(A P

Caution :

Streaming may be interrupted momentarily approximately every 24 hours after the process started.

Performing Live Streaming

Connecting to the Network

Page 100

Setting the FEC Matrix

Set the amount of FEC (Forward Error Correction) overhead for configuring SMPTE2022-1.

Select [Main Menu] B [ Streaming Set] B [Streaming Server] B [Server1] to [Server4] B [FEC Matrix] and press the Set button (Set).

The FEC adjustment screen appears.

Adjust the L and D values.

Use the H/I buttons to adjust the L value, and the J/K buttons to adjust the D value. The amount of FEC overhead changes when the L and D values are changed. To restore the L and D values to their default values, press the [SUB2] button.

Memo :

Setting range

4 ≦ L ≦ 20 (Default value: L = 10)

4 ≦ D ≦ 20 (Default value: D = 10)

L × D ≦ 100 (Default value: L×D = 10×10)

Connecting to the Network

Press the Set button (Set).

The screen returns to the streaming server setting screen.

Network] B [Live

Memo :

Increasing the amount of FEC overhead increases the packet loss resilience but more network bandwidth is used.

Even with the same amount of overhead, increasing the L value will increase the packet loss (continuous packet loss) resilience.

Performing Live Streaming

100