Page 1
KY-F70U
New Product News
3-CCD DIGITAL CAMERA
PRELIMINAR Y
Progressive Scan SXGA Digital Images
High Resolution
SXGA Digital Image
Capture with
SCSI Output and
Full Motion Live
Color Preview
Page 2
JVC’s KY-F70U: the flexible
and adaptable digital solution
to industrial photographic
requirements
Whether used on a scope or with a lens
attached, the KY-F70U delivers still images
with a level of resolution and a quality
of color which greatly surpass
conventional 3-CCD video technology.
The KY-F70U Digital Imaging System
interfaces directly to a PC via
SCSI-2 and so can capture SXGA
resolution images directly without
an image capture board, whilst still
offering full-motion live color preview
in real-time. Furthermore, interfaced
with a PC capture board, it can
deliver SXGA resolution into an
even wider range of applications.
The SCSI interface can be
switched simply from Slave to
Master for connection directly to
the SCSI port of a printer , for
example, thus directly providing high res SXGA
images without the intervention of a PC.
KEY FEATURES
The KY-F70U is an ultra-compact, multipurpose 1,360 x 1,024 pixel resolution
imaging system that interfaces readily with
C-mount lenses, microscopes, and other
imaging apparatus. It features the
convenience of internal frame memory.
This means that digital image output can
be either direct or from the frame memory
into PC, printer or storage device.
䡲 SXGA Picture Resolution 1,360 x 1,024
䡲 Effective 4.35 million square-pixel on-
chip progressive-scan CCD with 1.45
million effective pixels for each color
䡲 Live color preview (VGA) for speed,
ease and accuracy
䡲 1/2 inch C-mount to fit on wide variety
of lenses and scopes
䡲 3-CCD block with color separation
prism
䡲 1,360 x 1,024 pixel (1,000-TV line)
horizontal and vertical resolution
䡲 SCSI-2 interface allows direct digital
transfer to PC, and direct control of
printer or storage media.
䡲 TWAIN driver software for capturing
included, plus RS-232C camera control
software available, allowing easy
shooting from PC. 32-bit Windows 98
version already available.
䡲 Built-in 32-bit RISC CPU for faster
memory control response
䡲 Combination with additional PC capture boards realizes fast
access (processing) to PC.
䡲 Up to 3 m umbilical SCSI-2 cord from PC to final
termination
䡲 External trigger with flash synchronization
䡲 Picture frames are stored in uncompressed TIFF form to
prevent degradation.
䡲 Automatic Video Level adjustment
䡲 IEC 601-1 approval for medical use (with AA-P700)
䡲 Four uncompressed SXGA images may be stored in the
internal Frame Memory.
䡲 Camera set-up is carried out by on-screen menus which
cater for wide range of applications.
Page 3
AC ADAPTER AA-P700
ON
OFF
POWER
POWER
ALARM SHEET
PAPER
DATA
OPEN
CP700DSAMITSUBISHI
ONLINECOPY & CUTPAPER FEED
]
AA-P700
AC adapter
MO disk drive
Printer
AC
MONITOR VIDEO IN
Connect to
the power supply
Preview (VGA) monitor
Adapters
Connect the MO
drive unit
Connect
the printer
SCSI-2
DC IN
KY-F70
CAMERADIGITAL
C-MOUNT
(Compatibility: Mitsubishi CP700DSU/DSE and CP800DW)
AC ADAPTER AA-P700
ON
OFF
POWER
AA-P700
AC
KY-F70
CAMERADIGITAL
C-MOUNT
PC monitor
PC
Capture board
AC adapter
Analog RGB, WEN, Hs, Vs, RS-232C
RS-232C
1. Direct Digital Connection for
Printing or Storage
This system does not require a PC. Live color preview on the
monitor allows selection of the images to be captured to Printer or
MO disk.
KY-F70U Actual Digital Image
3. PC System Using
Capture Board
Via the 15-pin RGB port, SXGA
resolution images may be
captured with an appropriate
Image Digitizing Board. Live color
preview is available on the PC
screen and captured images can
be verified at their full resolution.
2. Direct PC Capturing
System
Via the SCSI terminal, high
resolution SXGA images can be
captured directly to a PC. Live
color preview allows selection of
the images.
The camera can be controlled
via the PC. In this system
the PC is the SCSI host and
the camera is the SCSI
peripheral.
Images captured to a PC may
be processed and manipulated
in application software such as
Photoshop
®
.
To run this system, the JVC
camera remote control
software and the TWAIN 32
capture software need to be
installed in the PC.
APPLICATIONS
Digital Image Capture: KY-F70U via SCSI output
AC ADAPTER AA-P700
ON
OFF
POWER
AA-P700
AC
SCSI-2
SCSI-2
RGB, Hs, Vs
DC IN
Trigger in
Flash
Trigger out
KY-F70
CAMERADIGITAL
C-MOUNT
RS-232C
PC
Preview (VGA)
monitor
Lenses or
adapters
Page 4
Printed in Japan
KCN-1768
NEKYF70NK9906
■The Hachioji Plant of Victor Company of Japan, Ltd., has received ISO14001 Certification
under the global standard for environmental management.
Image device 1/2-inch Interline Transfer CCD x 3
Scanning Progressive
Total pixels 4.35 million (3 x 1.45 million) pixels
Effective pixels for CCD 1.45 million pixels (H: 1,392 x V: 1,040)
Output pixels 1,360 x 1,024
Optical system Dichroic prism
Aspect ratio 4:3
Lens mount 1/2-inch C mount
Analog output R/G/B 0.7 V(p-p) 75 ohms each
Output mode SXGA: 1,360 x 1,024 pixels 7.5 frames/sec.
VGA: 640 x 480 pixels 60 frames/sec.
(Image refresh rate 7.5 frames/sec.)
VGA: 640 x 480 pixels 60 frames/sec.
(Image refresh rate 30 frames/sec.,
vertical resolution: 240 lines)
Output signal is selectable from above three modes
Digital output SCSI-2 50P half-pitch SCSI connector
Sync output Hs/Vs 3 V(p-p) (low active)
Image memory 5 frames (4 frames when selecting SXGA analog
output)
Sensitivity ISO100 equivalent
Quantization 10 bit in 8 bit out
White balance Auto and manual (menu)
Gain ISO100, 200, 400 (menu)
Electric shutter 1, 1/2, 1/4, 1/8, 1/15, 1/30, 1/60, 1/125, 1/250,
1/500, 1/1000, 1/2000, V.SCAN, EEI (menu)
Paint Manual (menu)
Flare compensation (Menu)
Dynamic shading (Menu)
Operating temperature 0 — 40°C
Input voltage DC12V
Power consumption Approx. 15W
Weight Approx. 850g (1.9 lbs.)
Dimensions (W x H x D) 70 x 80 x 150mm
2-13/16 x 3-3/16 x 5-15/16 inches
DISTRIBUTED BY
Design and specifications subject to change without notice.
KY-F70
CAMERADIGITAL
1
(1/16)
142.5 (5-5/8)
150 (5-15/16)
41.5 (1-11/16)
14 (5/8)
C-MOUNT
70 (2-13/16)
80 (3-3/16)
88 (3-1/2)
DIMENSIONS
Unit: mm (inches)
OPTIONS
SYSTEM REQUIREMENTS FOR PC
SOFTWARE
RECOMMENDED PRINTERS
SPECIFICATIONSPART NAMES
AA-P700
AC Power Adapter
MITSUBISHI COLOR PRINTER
CP800DW
CP700DSU/DSE
Photo: CP800DW
Ventilation hole
q Lens mount
w Camera mounting bracket
e Locking screws for the camera mounting bracket (M2.6 x 6mm, 3 units)
r MENU button
t SEND/UP button
y AW/SEL/DOWN button
u MODE/SET button
i REC mode lamp
o PLAY mode lamp
!0 FREEZE button
!1 MONITOR output terminal (D-sub 15-pin, female)
!2 LENS connection terminal
!3 POWER display lamp
!4 DC IN power input terminal (Mini DIN 8-pin, female)
!5 REMOTE terminal (Metal 10-pin, female)
!6 Dip switches
!7 SCSI terminal (Half-pitch 50-pin)
CPU: Pentium
®
166 MHz or faster
At least 20 MB of RAM
At least 10 MB of available hard-disk space
Serial port (RS-232C)
SCSI-2 board (Adaptec AHA-2940AU recommended)
Color monitor with 16,770,000-color recommended
Floppy disc drive
Windows
®
95, Windows®98, Windows®NT 4.0
TWAIN graphic software such as Adobe
®
Photoshop®installed
*Windows®95, Windows®98, Windows®NT 4.0, Adobe®Photoshop®and Pentium®are registered trademarks.
TWAIN 32 Capture Software (Bundled)
RS-232C Camera Control Software (Free software)
Loading...