JVC KS AX4500 Service Manual

SERVICE MANUAL

POWER AMPLIFIER

KS-AX4500

KS-AX4500KS-AX4500

Caution

If electricity is connected during disassembly, it must be a no load current. If it is load
current, be sure to attach a heat sink to the power-amp IC. This will be damaged if the
above precautions are not followed, as it does not have a sub heat sink attached to it.

Contents

Safety precaution
Location of main parts
Removal of main parts
Test method
Description of major ICs

1-2
1-3
1-5
1-7
1-8

Area Suffix

E

Continental Europe

J

Northern America

COPYRIGHT 2001 VICTOR COMPANY OF JAPAN, LTD.

No. 49622

Apr. 2001

KS-AX4500

CAUTION

!

Burrs formed during molding may be left over on some parts of the chassis. Therefore,
pay attention to such burrs in the case of preforming repair of this system.

1-2

Location of main parts

CONTROL PANEL

KS-AX4500

HEAT SINK

REAR PANEL

OUTPUT TERMINAL for FRONT(L/R)

FRONT PANEL

SWITCH KNOB VOLUME KNOB

INPUT for POWER

LOW INPUT jack for REAR(R)

LOW INPUT jack for FRONT(R)

FUSE

HEAT SINK

OUTPUT TERMINAL for REAR(L/R)

HEAT SINK

HIGH INPUT connector for REAR

LOW INPUT jack for REAR(L)

HIGH INPUT connector for FRONT

LOW INPUT jack for FRONT(L)

1-3