Page 1
SERVICE MANUAL
A
VIDEO CASSETTE RECORDER
82980200307
HR-V605ER,HR-V606ER
For disassembling and assembling of MECHANISM ASSEMBLY, refer to the SERVICE MANUAL No.86700 (MECHANISM ASSEMBLY).
Regarding service information other than these sections, refer to the service manual No. 82961 (HR-S5960EX).
lso, be sure to note important safety precautions provided in the service manual.
SPECIFICATION
HR-V605ER,HR-V606ER V16D1
COPYRIGHT © 2003 VICTOR COMPANY OF JAPAN, LTD.
No.82980
2003/07
Page 2
DIFFERENCE LIST
DIFFERENT TABLE OF FEATURE
The following table indicates main different points between models HR-S5960EX, HR-V605ER and HR-V606ER.
ITEM HR-S5960EX HR-V605ER HR-V606ER
POWER VOLTAGE (RATING) 220-240V(AUTO) / 50/60Hz 110-240V/50/60Hz ←
POWER SAVE DISPLAY OFF,MENU NOT USED ←
AUTO POWER OFF USED NOT USED ←
BODY COLOR PURE SILVER ← BLACK
MULTI-BRAND REMOTE CONTROL NOT USED TV,CABLE/SAT/DVD ←
IR CODE (RCU) A A,B ←
HEAD CLEANER NOT USED USED ←
SHUTTLE SEARCH(LATCH)-NTSC NOT USED S Px7, EPx21 ←
VHS
S-VHS USED NOT USED ←
S-VHS ET USED(PAL SP MODE) NOT USED ←
SQPB NOT USED USED(PAL/NTSC SP MODE) ←
RECORDING & PLAYBACK SPEED SP,LP
FRONT INPUT NOT USED VIDEO,AUDIO(L/R) ←
L-1 INPUT SCART IN/OUT(Y/C) VIDEO,AUDIO(L/R) ←
L-2 INPUT SCART IN(Y/C)/DECODER NOT USED ←
AV OUTPUT SCART OUT(Y/C),AUDIO(L/R) VIDEO,AUDIO(L/R) ←
BROADCASTING STANDARD B/G,D/K B/G,D/K,I ←
STEREO DECODER NICAM/A2 NOT USED ←
RF OUT CH/RF OUT SYSTEM[INITIAL]
PLUG & PLAY AUTO SET,AUTO CLOCK
BACKUP TIME 10 MINUTES 6 MONTHS(Lithium) ←
AUTO CLOCK / JUST CLOCK USED NOT USED ←
AUTO GUIDE CH SET USED NOT USED ←
REC LINK / INPUT USED(L-2) USED(L-1) ←
VCR PLUS+ SHOWVIEW NOT USED ←
OVERLAP WARNING w/OSD NOT USED USED ←
VPS/PDC USED NOT USED ←
IR CODE (DECK) A A,B ←
DISPLAY TYPE / LANGUAGE 6-DIGIT LED 4-DIGIT LED <-REAL TIME COUNTER USED NOT USED ←
TAPE REMAIN USED(DISPLAY) USED(OSD) ←
OSD LANGUAGES 13 LANGUAGES 3 LANGUAGES ←
Note:
Mark ← is same as left.
PAL/MESECAM(MANUAL)/
NTSC PB on PAL TV with HiFi
22-69CH/OFF[AUTO],G,K 28-60CH[36]/G,H,[K],I ←
PAL/MESECAM
/NTSC3.58/4.43/NTSC
PB on PAL TV with HiFi
PAL:SP,LP
NTSC:SP,EP
LANG->CLOCK
->SYSTEM->CH
←
←
←
1-2 (No.82980)
Page 3
DIFFERENT TABLE OF PARTS LIST
PACKING AND ACCESSORY ASSEMBLY<M1>
REF NO. ITEM HR-S5960EX HR-V605ER HR-V606ER
301 PACKING CASE LP 30855-004B LP31255-002B ←
302 CUSHION ASSY LP31187-001A LP31247-001A ←
303 POLY BAG PQM30021-093 LP41038-002A ←
306 REMOTE CTL UNIT LP21138-003C LP20878-018B ←
306A COVER(BATTERY) LP40991-002B LP40610-003A ←
307 LI BATTERY QAB0057-001 PECA0903 ←
310 INST.BOOK(ENGLISH) LPT0751-001B - -
310 INST.BOOK(GERMANY) LPT0751-002B - -
310 INST.BOOK(FRENCH) LPT0751-003A - -
310 INST.BOOK(DUTCH) LPT0751-004A - -
310 INST.BOOK(SPANISH) LPT0751-005A - -
310 INST.BOOK(ITALIAN) LPT0751-006A - -
310 INST.BOOK(DANISH) LPT0751-007A - -
310 INST.BOOK(FINNISH) LPT0751-008A - -
310 INST.BOOK(SWEDISH) LPT0751-009A - -
310 INST.BOOK(NORWEGIAN) LPT0751-010A - -
310 INST.BOOK(PORTUGUESE) LPT0751-011A - -
310 INST.BOOK(GREEK) LPT0751-012A - -
310 INST.BOOK(CZECH) LPT0751-013A - -
310 INST.BOOK(POLISH) LPT0751-014A - -
310 INST.BOOK(HUNGARIAN) LPT0751-015A - -
310 INST.BOOK(RUSSIAN) - LPT0797-001A ←
312 RF CABLE PEAC0300-02 PEAC0348-02 ←
316 WARRANTY CARD BT-54013-5 BT-54012-3 ←
Note:
Mark ← is same as left.
Mark - is not used.
(No.82980)1-3
Page 4
FINAL ASSEMBLY<M2>
REF NO. ITEM HR-S5960EX HR-V605ER HR-V606ER
501 FRONT PANEL ASSY LP10452-005C LP10452-035A LP10452-040B
501A CASSETTE DOOR LP21123-003B LP21123-014A LP21123-017A
501C COVER(WINDOW) LP21127-001B - 501D WINDOW(1)/WINDOW(2) LP31188-002A LP21129-004A ←
501E COVER(L) LP31109-002A - 501F COVER(R) LP30877-003A LP30877-008A LP30877-009A
501G STICKER LP41035-004A LP41035-012A ←
501H STICKER - LP41035-013A ←
503 TOP COVER LP10013-051C LP10013-045C LP10013-065A
504 TAP SCREW QYTDSF3010R ← QYTDSF3010M
506 BOTTOM COVER LP10014-002C - -
507 SCREW DPSF3010Z - -
509 TERM.BOARD(PAL) LP20317-011B - -
510 DRUM FINAL ASSY PDV2544A PDV2539A ←
515 BOTTOM CHASSIS LP10108-001L LP10108-009K ←
516 EARTH PLATE(RF) PQ21623-2-5 - 519 ROLLER ARM ASSY LP40370-001F - 520 INERTIA PLATE PQ45160 - 530 HEAD CLEANER ASSY - LP40910-002G ←
530A CLEANER - PQ46419-2 ←
501
501H
501D
501A
501G
501F
501B
508
512
510
c
508
508
530
530A
512
c
d
MECHANISM ASSEMBLY<M4>
REF NO. ITEM HR-S5960EX HR-V605ER HR-V606ER
4 FE HEAD QAH0082-001 NAH0004-001 ←
30 ARM BASE LP31020-004B - ←
31 TAP SCREW QYTDST2606Z - ←
48 S-SWITCH LP40930-002E - ←
52 AC HEAD QAH0081-001 NAH0003-001 ←
59 LOADING MOTOR QAR0023-001 QAR0289-001 ←
85 CAPSTAN MOTOR QAR0224-002 QAR0267-00 2 ←
90 IDLER GEAR2 LP40829-001B LP40829-002A ←
119 DRIVE ARM(R) LP30979-001P LP30979-001N ←
WR1 E-CARD WIRE WJT0059-001D WJT0117-001A ←
MAIN BOARD ASSEMBLY<03>
REF NO. ITEM HR-S5960EX HR-V605ER HR-V606ER
PW1 MAIN BOARD ASSY LPA10189-02C LPA10212-03B ←
LITHIUM BATTERY BOARD ASSEMBLY<09>
REF NO. ITEM HR-S5960EX HR-V605ER HR-V606ER
PW1
LITHIUM BATTERY BOARD ASSY
- LPA10088-01A4 ←
BT3001 BATTERY HOLDER - QNZ0032-001 ←
Note:
Mark ← is same as left.
Mark - is not used.
1-4 (No.82980)
Page 5
SECTION 3
ADJUSTMENT
The difference point(s) compared with the reference model are
as follows.
DELETE
3.3.2 Video circuit
3.3.2.1 EE Y/PB Y (S-VHS/VHS) LEVEL
3.3.4 PAL/SECAM converter circuit [EF model]
3.3.4.1 Colour difference level
3.3.4.2 SECAM burst position
Adjustment procedure and value are changed.
3.3.1 Servo circuit
3.3.1.1 Switching point
Signal (A1)
Mode (B) • PB
Equipment (C) • Oscilloscope
Measuring point (D1)
External trigger (E) • TP111 (D.FF)
Adjustment part (F) • Jig RCU: Code ”5A”
Specified value (G) • 6.5 ± 0.5H
Adjustment tool (H) • Jig RCU [PTU94023B]
(1) Play back the signal (A1) of the alignment tape (A2).
(2) Apply the external trigger signal to D.FF (E) to observe the
VIDEO OUT waveform and V.PB FM waveform at the mea-
suring points (D1) and (D2).
(3) Set the VCR to the manual tracking mode.
(4) Adjust tracking so that the V.PB FM waveform becomes
maximum.
(5) Set the VCR to the Auto adjust mode by transmitting the
code (F) from the Jig RCU. When the VCR enters the stop
mode, the adjustment is completed.
(6) If the VCR enters the eject mode, repeat steps (1) to (5)
again.
(7) Play back the alignment tape (A2) again, confirm that the
switching point is the specified value (G).
• Stairstep signal
(A2)
• Alignment tape(LP,stairstep,PAL) [MHPE-L]
• VIDEO OUT terminal (75 ohm terminated)
(D2)
• TP106 (PB. FM)
Trigger point
Switching point
V.sync
V. rate
Fig.3-3-1a Switching point
(No.82980)1-5
Page 6
VICTOR COMPANY OF JAPAN, LIMITED
AV & MULTIMEDIA COMPANY VIDEO RECORDER CATEGORY 12, 3-chome, Moriya-cho, kanagawa-ku, Yokohama, kanagawa-prefecture, 221-8528, Japan
(No.82980)
Printed in Japan
200307WPC
Loading...