JVC HR-V600EX, HR-V601EX, HR-V605EF, HR-V605EK, HR-V606EK Service Manual

SERVICE MANUAL

A

VIDEO CASSETTE RECORDER

82956200305

HR-V600EX,HR-V601EX,HR-V605EF,

HR-V605EK,HR-V606EK,HR-V705EK

(EK model)

(other model)

For disassembling and assembling of MECHANISM ASSEMBLY, refer to the SERVICE MANUAL No.86700 (MECHANISM ASSEMBLY).

Regarding service information other than these sections, refer to the service manual No. 82961 (HR-S5960EX).

lso, be sure to note important safety precautions provided in the service manual.

SPECIFICATION (The specifications shown pertain specifically to the model HR-V600EX, HR-V601EX)

GENERAL

Power requirement AC 220 V - 240 V~, 50 Hz/60 Hz
Power consumption

Power on 14 W

Temperature

Operating position Horizontal only
Dimensions

(W x H x D)
Weight 3.1 kg
Format VHS PAL standard
Maximum recording time

VIDEO/AUDIO

Signal system PAL-type colour signal and CCIR

Recording system DA4 (Double Azimuth) head helical scan

Signal-to-noise ratio 45 dB
Horizontal resolution 250 lines
Frequency range
Normal audio 70 Hz to 10,000 Hz

Power off 3.2 W

Operating 5°C to 40°C

Storage -20°C to 60°C

400 mm x 94 mm x 270 mm

(SP) 240 min. with E-240 video cassette

(LP) 480 min. with E-240 video cassette

monochrome signal, 625 lines 50 fields

system

Hi-Fi audio 20 Hz to 20,000 Hz
Input/Output 21-pin SCART connectors:

IN/OUT x 1, IN/DECODER x 1RCA
connectors:AUDIO OUT x 1

TUNER/TIMER

TV channel storage
capacity

Tuning system Frequency synthesized tuner
Channel coverage
VHF 47 MHz - 89 MHz/104 MHz - 300 MHz/302

UHF 470 MHz - 862 MHz
Aerial output UHF channels 22 - 69 (Adjustable)
Memory backup time Approx. 10 min.

ACCESSORIES

Provided accessories : RF cable, Infrared remote control unit,

Optional accessories : Satellite Controller RM-SD1

Specifications shown are for SP mode unless specified otherwise.
E. & O.E. Design and specifications subject to change without
notice.

99 positions (+AUX position)

MHz - 470 MHz

Lithium battery - CR2032-

HR-V600EX,HR-V601EX,HR-V605EF,HR-V605EK,HR-V606EK,HR-V705EK V16D1,V16D1+

COPYRIGHT © 2003 VICTOR COMPANY OF JAPAN, LTD.

No.82956

2003/05

DIFFERENCE LIST

DIFFERENT TABLE OF FEATURE

The following table indicates main different points between models HR-S5960EX, HR-V600EX, HR-V601EX, HR-V601EX, HR­V605EF, HR-V605EK, HR-606EK, and HR-V705EK.

ITEM HR-S5960EX HR-V600EX HR-V601EX HR-V605EF HR-V605EK HR-V606EK HR-V705EK

POWER PLUG CEE

BODY COLOUR

ADVANCED JOG NOT USED

RCU COLOUR LIGHT GRAY

SCART CABLE OPTIONAL

MESECAM USED(MANUAL)

DECODER(L-2) USED

S-VHS USED NOT USED

S-VHS ET USED(PAL SP MODE) NO

SQPB NOT USED USED(PAL SP MODE)

SAT CONTROL TERMINAL NOT USED USED

BROADCASTING STANDARD

STEREO DECODER NICAM/A2

RF OUT USED

VCR PLUS+ SHOWVIEW SHOWVIEW DELUXE

OVERLAP WARNING w/OSD NOT USED USED

VPS USED

24H EXPRESS TIMER
PROGRAMMING

DISPLAY PANEL 6-DIGIT LED GREEN 4-DIGIT LED GREEN

OSD LANGUAGE 13 LANGUAGES

T-V LINK NOT USED USED

PURE SILVER

B/G,D/K

NOT USED

Note:

← is same as left.

Mark

←←←

←

←←←←←
←←←←
←←
←←
←←←

←←
←←
←←

←←
←←←←←

←←

PURE SILVER &

DARK.SILVER[WINDO

W/L/R COVER]

←←←←←
←←←←←
←←←←←
←←←←←

←←
←←←←←

←←←←←

←←←←←

PURE SILVER

PROVIDED OPTIONAL

USED NOT USED

L,L',B/G I

NICAM(L,B/G)/A2(B/G) NICAM

NOT USED USED

NOT USED

FRENCH ENGLISH

3PIN

PURE SILVER &

DARK.SILVER[WINDO

W/L/R COVER]

NOT USED

VIDEO PLUS+ DELUXE

←←←

←←

BLACK

MOLD BLACK LIGHT GRAY

←←
←←
←←

←←
←←
←←
←←

←←

PURE SILVER &

DARK.SILVER[WINDO

W/L/R COVER]

USED

USED

DIFFERENT TABLE OF PARTS LIST

PACKING AND ACCESSORY ASSEMBLY<M1>



REF NO. ITEM HR-S5960EX HR-V600EX HR-V601EX HR-V605EF HR-V605EK HR-V606EK HR-V705EK

301 PACKING CASE LP30855-004B LP30855-003B
306 REMOTE CTL UNIT LP21138-003C

306A COVER(BATTERY) LP40991-002B



310 INST.BOOK(ENGLISH) LPT0751-001B LPT0750-001B



310 INST.BOOK(GERMANY) LPT0751-002B LPT0750-002B



310 INST.BOOK(FRENCH) LPT0751-003A LPT0750-003A



310 INST.BOOK(DUTCH) LPT0751-004A LPT0750-004A



310 INST.BOOK(SPANISH) LPT0751-005A LPT0750-005A



310 INST.BOOK(ITALIAN) LPT0751-006A LPT0750-006A



310 INST.BOOK(DANISH) LPT0751-007A LPT0750-007A



310 INST.BOOK(FINNISH) LPT0751-008A LPT0750-008A



310 INST.BOOK(SWEDISH) LPT0751-009A LPT0750-009A



310 INST.BOOK(NORWEGIAN) LPT0751-010A LPT0750-010A



310 INST.BOOK(PORTUGUESE) LPT0751-011A LPT0750-011A



310 INST.BOOK(GREEK) LPT0751-012A LPT0750-012A



310 INST.BOOK(CZECH) LPT0751-013A LPT0750-013A



310 INST.BOOK(POLISH) LPT0751-014A LPT0750-014A



310 INST.BOOK(HUNGARIAN) LPT0751-015A LPT0750-015A
315 PERI CABLE - - - QAM0238-003 - - ­316 WARRANTY CARD BT-54013-5
317 WARRANTY CARD - - - BT-54008-4
319Q.CARD(JUK) ----LYT0194-001B

←←←←
←←←←

←←

←←←←←

LP21138-004C LP21138-003C
LP40991-001B LP40991-002B

←
←
←
←
←
←
←
←
←
←
←
←
←
←
←

- LPT0766-001A

----

LPT0772-001B - - -

----

----

----

----

----

----

----

----

----

----

----

----

----

←←←

←

←←

LPT0767-001A

Note:

← is same as left.

Mark

Mark − is not used.

1-2 (No.82956)

FINAL ASSEMBLY<M2>



REF NO. ITEM HR-S5960EX HR-V600EX HR-V601EX HR-V605EF HR-V605EK HR-V606EK HR-V705EK



501 FRONT PANEL ASSY LP10452-005C LP10452-004C LP10452-012C LP10452-018B LP10452-014B LP10452-015B LP10452-016C
501A CASSETTE DOOR LP21123-003B LP21123-002A
501C COVER(WINDOW) LP21127-001B

←

501D WINDOW(1) LP31188-002A LP31188-001B

←←←

LP21127-006B LP21127-001B LP21127-006B LP21127-008B LP21127-009B

←

LP31188-010A LP31188-006A
501E COVER(L) LP31109-002A LP31109-001A LP31109-003A LP31109-007A LP31109-004A LP31109-005A LP31109-006A
501F COVER(R) LP30877-003A
501G STICKER LP41035-004A LP41035-009A

←

LP30877-005A LP30877-003A LP30877-005A LP30877-007A LP30877-005A

←←

LP41035-010A

501H BUTTON - - - - - - LP30876-003A



503 TOP COVER LP10013-051C
504 TAP SCREW TOP COVER SIDE QYTDSF3010R
510 DRUM FINAL ASSY PDV2544A PDV2539A



514 POWER CORD QMP4A10-170

←←←←
←←←←

←

←←←

PDV2541A PDV2539A

QMP51K0-170-K
519 ROLLER ARM ASSY LP40370-001F - - ---­520 INERTIA PLATE PQ45160 - - ---­535 KNOB(ADV.JOG) - - - - - - LP30875-001B
536 TAP SCREW ADV.JOG - - - - - - QYTPSFG2608Z

WR5 FFC WIRE ADV JOG-MAIN - - - - - - QUQ212-0414CG

501

501E

501C

501A

535

[HR-V705EK]

501D

501G

501F

501B

501H

[HR-V705EK]

BOTTOM SIDE

[HR-V705EK]

TOP SIDE

536

ADV.JOG
BOARD ASSY<39>
[HR-V705EK]

LP21123-009A LP21123-002A

←

←←

LP10013-061C LP10013-051C
QYTDSF3010M QYTDSF3010R

←←
←←

WR5
[HR-V705EK]

CN7003

536
[HR-V705EK]

LP31188-008A

MECHANISM ASSEMBLY<M4>



REF NO. ITEM HR-S5960EX HR-V600EX HR-V601EX HR-V605EF HR-V605EK HR-V606EK HR-V705EK

30 ARM BASE LP31020-004B - - ---­31 TAP SCREW QYTDST2606Z - - ---­48 S-SWITCH LP40930-002E - - ----



85 CAPSTAN MOTOR QAR0224-002 QAR0204-002
90 IDLER GEAR 2 LP40829-001B LP40829-002A

WR1 E-CARD WIRE WJT0059-001D WJT0059-001E

←←←←←
←←←←←
←←←←←

MAIN BOARD ASSEMBLY<03>



REF NO. ITEM HR-S5960EX HR-V600EX HR-V601EX HR-V605EF HR-V605EK HR-V606EK HR-V705EK

PW1 MAIN BOARD ASSY LPA10189-02C LPA10189-01C

←

LPA10189-05C LPA10189-03C

←

LPA10189-04C

ADV JOG BOARD ASSEMBLY<39>



REF NO. ITEM HR-S5960EX HR-V600EX HR-V601EX HR-V605EF HR-V605EK HR-V606EK HR-V705EK

PW1 ADV JOG BOARD ASSY - - - - - - LPA10191-03A

R7047 C RESISTOR - - - - - - QRE141J-472Y

CN7004 CONNECTOR - - - - - - QGF1209F1-04

S7030 TACT SWITCH - - - - - - QSW0456-002Z

UN7001 ROTARY ENCODER - - - - - - QSW0938-001

SECAM BOARD ASSEMBLY<88>



REF NO. ITEM HR-S5960EX HR-V600EX HR-V601EX HR-V605EF HR-V605EK HR-V606EK HR-V705EK

PW1 SECAM BOARD ASSY - - - LPA10011-03A - - -

SAT CTL BOARD ASSEMBLY<94>



REF NO. ITEM HR-S5960EX HR-V600EX HR-V601EX HR-V605EF HR-V605EK HR-V606EK HR-V705EK

PW1 SAT CTL BOARD ASSY - LPA10189-01A4

R 7167 MG RESISTOR - NRSA02J-0R0X

CN7106 PARA RIBON WIRE - QUM022-18A4A4

J 7108 MINI JACK, SAT CTL - PU60612

←←←←←
←←←←←
←←←←←
←←←←←

Note:

← is same as left.

Mark

Mark − is not used.

(No.82956)1-3

SECTION 3

ADJUSTMENT

The difference point(s) compared with the reference model are
as follows.

DELETE

3.3.2 Video circuit

3.3.2.1 EE Y/PB Y (S-VHS/VHS) LEVEL

3.3.4 PAL/SECAM converter circuit [EF model]

3.3.4.1 Colour difference level

3.3.4.2 SECAM burst position

Adjustment procedure and value are changed.

3.3.1 Servo circuit

3.3.1.1 Switching point

Signal (A1)

Mode (B) • PB
Equipment (C) • Oscilloscope
Measuring point (D1)

External trigger (E) • TP111 (D.FF)
Adjustment part (F) • Jig RCU: Code ”5A”
Specified value (G) • 6.5 ± 0.5H
Adjustment tool (H) • Jig RCU [PTU94023B]

(1) Play back the signal (A1) of the alignment tape (A2).
(2) Apply the external trigger signal to D.FF (E) to observe the

VIDEO OUT waveform and V.PB FM waveform at the mea-

suring points (D1) and (D2).
(3) Set the VCR to the manual tracking mode.
(4) Adjust tracking so that the V.PB FM waveform becomes

maximum.
(5) Set the VCR to the Auto adjust mode by transmitting the

code (F) from the Jig RCU. When the VCR enters the stop

mode, the adjustment is completed.
(6) If the VCR enters the eject mode, repeat steps (1) to (5)

again.
(7) Play back the alignment tape (A2) again, confirm that the

switching point is the specified value (G).

• Stairstep signal

(A2)

• Alignment tape(LP,stairstep,PAL) [MHPE-L]

• VIDEO OUT terminal (75 ohm terminated)

(D2)

• TP106 (PB. FM)

Trigger point

1-4 (No.82956)

Switching point

V.sync

V. rate

Fig.3-3-1a Switching point

VICTOR COMPANY OF JAPAN, LIMITED

AV & MULTIMEDIA COMPANY VIDEO RECORDER CATEGORY 12, 3-chome, Moriya-cho, kanagawa-ku, Yokohama, kanagawa-prefecture, 221-8528, Japan

(No.82956)

Printed in Japan

200305WPC