ENGLISH
VIDEO CASSETTE RECORDER
HR-J690EU
HR-J691EU
HR-J693EU
HR-J694EU
INSTRUCTIONS
LPT0628-001B Printed in Germany
COPYRIGHT © 2002 VICTOR COMPANY OF JAPAN, LTD. 0302 MNVfIDfJVE
SAFETY FIRST............................................................................... 1
Buttons, Connectors and Indicators ................................................ 2
Basic Connections.......................................................................... 3
Initial Settings.............................................................................. 4
Auto Set Up............................................................................ 4
Preset Download.................................................................... 4
Language Set .......................................................................... 4
T-V Link Functions......................................................................... 5
Satellite Receiver Control Set ........................................................ 5
Playback ...................................................................................... 6
Recording..................................................................................... 7
S
Timer Recording............................................................................ 9
®
HOWVIEW
System Setup ............................................................. 8
S
HOWVIEW
Express Timer Programming.................................................... 9
Checking, canceling or changing programme settings........... 10
Automatic Satellite Programme Recording............................ 10
®
Timer Programming............................................. 9
Editing ....................................................................................... 11
Editing with another video recorder or a camcorder ............. 11
System Connections .................................................................... 11
Connecting to a satellite receiver.......................................... 11
Connecting/Using a decoder ................................................ 11
Connecting/Using a stereo system ........................................ 11
Subsidiary Settings..................................................................... 12
Mode Set.............................................................................. 12
Clock Set.............................................................................. 13
Tuner Set .............................................................................. 13
Video Channel Set................................................................ 16
Specifications.............................................................................. 16
WAR NIN G
There are two different types of SECAM colour systems:
SECAM-L, used in FRANCE (also called SECAM-West), and
SECAM-B, used in Eastern European countries (also called
SECAM-East).
1. This recorder can also receive SECAM-B colour television
signals for recording and playback.
2. Recordings made of SECAM-B television signals produce
monochrome pictures if played back on a video recorder of
SECAM-L standard, or do not produce normal colour
pictures if played back on a PAL video recorder with
SECAM-B system incorporated (even if the TV set is SECAMcompatible).
3. SECAM-L prerecorded cassettes or recordings made with a
SECAM-L video recorder produce monochrome pictures
when played back with this recorder.
4. This recorder cannot be used for the SECAM-L standard. Use
a SECAM-L recorder to record SECAM-L signals.
IMPORTANT
䡲 Please read the various precautions on pages 1 and 2 before
installing or operating the recorder.
䡲 It should be noted that it may be unlawful to re-record pre-
recorded tapes, records, or discs without the consent of the
owner of copyright in the sound or video recording, broadcast
or cable programme and in any literary, dramatic, musical, or
artistic work embodied therein.
For Italy:
“It is declared that this product, brand JVC, conforms to the
Ministry Decree n. 548 of 28 Aug.’95 published in the Official
Gazette of the Italian Republic n. 301 of 28 Dec.’95”
SAFETY FIRST
Safety Precautions
The rating plate and the safety caution are on the rear of the unit.
WARNING: DANGEROUS VOLTAGE INSIDE
WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT
EXPOSE THIS UNIT TO RAIN OR MOISTURE.
CAUTION
䡲 When you are not using the recorder for a long period of
time, it is recommended that you disconnect the power cord
from the mains outlet.
䡲 Dangerous voltage inside. Refer internal servicing to qualified
service personnel. To prevent electric shock or fire hazard,
remove the power cord from the mains outlet prior to
connecting or disconnecting any signal lead or aerial.
The STANDBY /O N 1 button does not completely shut off
mains power from the unit, but switches operating current on
and off. “`” shows electrical power standby and “ ! ” shows
ON.
Video tapes recorded with this video recorder in the LP (Long
Play) mode cannot be played back on a single-speed video
recorder.
● Cassettes marked “VHS” (or “S-VHS”) can be used with this
video cassette recorder. However, S-VHS recording is not
possible with this model.
● This model is equipped with SQPB (S-VHS QUASI PLAYBACK)
that makes it possible to play back S-VHS recordings in the SP
mode with regular VHS resolution.
● HQ VHS is compatible with existing VHS equipment.
● S
HOWVIEW
Corporation. The S
licence from Gemstar Development Corporation.
—1—
is a registered trademark of Gemstar Development
HOWVIEW
system is manufactured under
When the equipment is installed in a cabinet or a shelf, make sure
A
that it has sufficient space on all sides to allow for ventilation
(10 cm or more on both sides, on top and at the rear).
When discarding batteries, environmental problems must be
considered and the local rules or laws governing the disposal of
these batteries must be followed strictly.
Failure to heed the following precautions may result in damage to
the recorder, remote control or video cassette.
1. DO NOT
place the recorder …
… in an environment prone to extreme temperatures or
humidity.
… in direct sunlight.
… in a dusty environment.
… in an environment where strong magnetic fields are
generated.
… on a surface that is unstable or subject to vibration.
2. DO NOT
block the recorder’s ventilation openings or holes.
(If the ventilation openings or holes are blocked by a
newspaper or cloth, etc., the heat may not be able to get out.)
3. DO NOT
place heavy objects on the recorder or remote
control.
4. DO NOT
place anything which might spill on top of the
recorder or remote control.
(If water or liquid is allowed to enter this equipment, fire or
electric shock may be caused.)
5. DO NOT
6. DO NOT
expose the apparatus to dripping or splashing.
use this equipment in a bathroom or places with
water. Also DO NOT place any containers filled with water or
liquids (such as cosmetics or medicines, flower vases, potted
plants, cups, etc.) on top of this unit.
7. DO NOT
place any naked flame sources, such as lighted
candles, on the apparatus.
8. AVOID
violent shocks to the recorder during transport.
Usable cassettes
● Compact VHS camcorder recordings can
be played on this recorder. Simply place
the recorded cassette into a VHS Cassette
Adapter and it can be used just like any
full-sized VHS cassette.
● This recorder is equipped with SQPB (S-VHS QUASI
PLAYBACK) that lets you watch tapes recorded in the S-VHS
format and the SP mode with regular VHS resolution.
* SQPB does not deliver Super VHS resolution.
● This recorder can record on regular VHS and Super VHS
cassettes. However, it will record regular VHS signals only.
* S-VHS recording is not possible with this recorder.
TTENTION:
To mobile phone users:
Using a mobile phone in the vicinity of the recorder may cause
picture vibration on the TV screen or change the screen to a
blue back display.
On placing the recorder:
Some TVs or other appliances generates strong magnetic fields.
Do not place such appliance on top of the recorder as it may
cause picture disturbance.
Buttons, Connectors and Indicators
Front Panel
Pa us e
9
Play
4
Cassette loading slot
Forward
Fast
5
MOISTURE CONDENSATION
Moisture in the air will condense on the recorder when you move
it from a cold place to a warm place, or under extremely humid
conditions—just as water droplets form on the surface of a glass
filled with cold liquid. Moisture condensation on the head drum
will cause damage to the tape. In conditions where condensation
may occur, keep the recorder’s power turned on for a few hours to
let the moisture dry.
How to use the remote control
Before use, insert the batteries in the correct directions as
indicated under the battery cover. The remote control can operate
most of your recorder’s functions, as well as basic functions of JVC
TV sets.
● Point the remote control toward the receiving window on the
recorder.
● The maximum operating distance of the remote control is about
8m.
● To operate your JVC TV, while holding down TV, press the
corresponding button: 1, TV/VCR, TV PR +/–, TV %+/– (TV
Volume), ^ (TV Muting).
NOTE:
If the remote control does not work properly, remove its batteries,
wait for a few seconds, replace the batteries and then try again.
Video heads cleaning
The heads get dirty in the following cases:
● in an environment prone to extreme temperature or humidity
● in a dusty environment
● flaw, dirt or mold on video tapes
● continuous usage for a long time
Use a dry cleaning cassette — TCL-2 — when:
● Rough, poor picture appears while a tape is played back.
● The picture is unclear or no picture appears.
● “USE CLEANING CASSETTE” appears on the screen (only with
“O.S.D.” set to “ON” (
墌
12)).
SAT
Stop/Eject
0
Display panel
Play indicator
Record
indicator
* Each time you press
number and the clock time alternatively.
Timer mode indicator
Channel and auxiliary input/
Clock time*
, the display panel shows the channel
––:––
Rear Panel
Mains power cord
PR
Infrared beam
receiving window
Record
SAT# indicator
Rewind
3
7
VCR indicator
REVIEW
indicator
—2—
Remote control
Number keys
Rewind
3
Record
7
Stop
8
Ti mer
Play
4
Fast
Forward
Pa us e
Basic Connections
A
Check contents
Make sure the package contains all of the accessories listed in
“Specifications” (
B
Situate recorder
Place the recorder on a stable, horizontal surface.
C
Connect recorder to TV
#
5
9
Aerial connector
墌
Back of TV
21-pin SCART
connector
16).
TV aerial cable
* PDC recording is not possible in Central and Eastern Europe.
On-screen display
If you press OK/ on the remote control when “O.S.D.” is set to
“ON” (
screen. To clear the on-screen display, press OK/ again.
The indications are not recorded even if the recorder is in the
recording mode.
A Recorder operation mode
B Tape speed
C Tape direction
D Time counter
E Tape remaining time
F Audio mode
G Tape position*
H VPS/PDC* indicator
I Type of broadcast
J Current day/month/year
K Clock
L Channel and auxiliary input
M Cassette loaded mark
12), you can see the current recorder status on the
墌
* The position of “q” in relation to “0” (Beginning) or “+” (End) shows
the current position on the tape.
* PDC recording is not possible in Central and Eastern Europe.
21-pin SCART cable
(not provided)
Mains power cord
Back of recorder
Mains outlet
RF cable
(provided)
L-1 IN/OUT RF OUT
ANT. IN
RF Connection
Disconnect the TV aerial cable from the TV.
A
Connect the TV aerial cable to the ANT. IN connector on the
B
rear of the recorder.
Connect the provided RF cable between the RF OUT
C
connector on the rear of the recorder and the TV’s aerial
connector.
AV Connection
If your TV is equipped with a 21-pin SCART connector, perform
AV connection to improve picture quality during tape playback.
Connect the aerial, recorder and TV as shown in the
A
illustration.
Connect an optional 21-pin SCART cable between the L-1 IN/
B
OUT connector on the rear of the recorder and the TV’s 21-pin
SCART connector.
D
Connect recorder to mains
Plug the mains power cord into a mains outlet.
—3—
A
A
Initial Settings
After the 1 is pressed for the first time to power on the recorder,
the recorder starts Auto Set Up or Preset Download.
TTENTION:
If you have connected the recorder to a TV offering T-V Link via a
fully-wired 21-pin SCART cable and if the TV is turned on, the
recorder automatically performs the Preset Download even if you
perform Auto Set Up.
Before starting:
● Perform “Basic Connections” (
● Set the TV to its AV mode (with AV connection) or UHF
channel 36 (with RF connection).
墌
3).
Auto Set Up
— Auto Channel Set/Auto Clock Set*/Auto Guide Program
Number Set*
* If you select a country in Central or Eastern Europe, set the clock
and Guide Program Number manually.
A
Turn on recorder
Press 1. The Country Set screen appears
on the screen.
● If you have connected your TV to the
recorder with RF connection and the onscreen display appearing on UHF
channel 36 looks distorted, perform
“Video Channel Set” (
B
Select your country
Press rt to place the pointer next to your country, then press OK.
The language is automatically selected for the on-screen display
depending on the country you have selected. The AUTO SET/T-V
LINK screen appears.
● If you select BELGIUM or SUISSE and press OK, the Language
Set screen appears. Press rt to place the pointer next to the
desired language, then press OK. Go to step
● If you select MAGYARORSZÁG, CESKÁ
REPUBLIKA, POLSKA or OTHER
EASTERN EUROPE, press OK. The Clock
Set screen appears. Press rt until the
desired time appears, then press OK or
e. Set the date and year in the same way.
(Holding rt changes the time in
30-minute intervals, or changes the date
in 15-day intervals.) Then press MENU and go to step
C
Perform Auto Set Up
Press rt to place the pointer next to
“AUTO SET” and press OK or e.
● If you are using the display panel, press
rt to select “Auto” and press OK or e.
● Do NOT press any button during Auto Set Up.
D
Confirm/Set video channel
With RF connection
The video channel that is shown on the display
panel is your video channel. Press OK.
● If you have selected MAGYARORSZÁG,
CESKÁ REPUBLIKA, POLSKA or OTHER
EASTERN EUROPE in step
instead of “1”.
● To view picture signals from the recorder, set your TV to the
video channel.
With AV connection
Press PR – until the display panel shows
“1 – –” (or “2 – –”). Now the video channel
is set to off. Then press OK.
● To view picture signals from the recorder, set your TV to its AV
mode.
16).
墌
2222, “2” appears
3333.
3333.
E
Check results
If both Auto Channel Set and Clock Set
have been performed successfully, the
correct current time is displayed.
Turn on the TV and select its video channel or AV mode. Then
make sure that all necessary stations have been stored in the
recorder’s memory by using the PR button(s).
If Auto Channel Set has succeeded but
Clock Set has not, “1” is displayed.
Turn on the TV and select its video
A
channel or AV mode. Then make sure that all necessary stations have
been stored in the recorder’s memory by using the PR button(s).
Perform “Clock Set” (墌13).
B
If both Auto Channel Set and Clock Set
have failed, “– –:– –” is displayed.
Make sure the cables are connected
properly. Turn off the recorder once, then turn the recorder back on
again. The Country Set screen appears on the screen. Perform Auto
Set Up or Preset Download again.
Preset Download
— Auto Channel Set by downloading preset data from TV/
Auto Clock Set*/Auto Guide Program Number Set*
* If you select a country in Central or Eastern Europe, set the clock
and Guide Program Number manually.
TTENTION:
You can use this function only with a TV offering T-V Link, etc.* Be
sure to use a fully-wired 21-pin SCART cable.
* Compatible with TVs offering T-V Link, EasyLink, Megalogic,
SMARTLINK, Q-Link, DATA LOGIC or NexTView Link via fully-wired 21pin SCART cable. The degree of compatibility and available functions
may differ by system.
Before starting:
Perform steps
A
Perform Preset Download
Press rt to place the pointer next to “T-V
LINK” and press OK or e.
● If you are using the display panel, press
rt to select “CH – –” and press OK or e.
● Do NOT press any button during Preset Download. When Preset
Download is completed, “COMPLETED” appears for about
5 seconds, then the normal screen appears.
B
Check results
Perform step
C
Set video channel to off
Perform “Video Channel Set” (墌16).
NOTES:
● Depending on the area, the recorder cannot perform Auto Set
Up or Preset Download properly.
● In the area where no TV station transmits a PDC (Programme
Delivery Control) signal, the recorder can perform neither Auto
Clock Set nor Auto Guide Program Number Set.
● If you have moved to a different area, perform “Video Channel
Set” (
“Clock Set” (
● If a new station starts broadcasting in your area, perform “Tuner
Set” (
1111 – 2222 of “Auto Set Up”.
5555
of “Auto Set Up”.
16) (with RF connection), “Tuner Set” (墌13) and
墌
墌
13) as required.
墌
13) and, if necessary, “Video Channel Set” (墌16).
Language Set
You can change the language setting manually as required.
A
Access Main Menu screen, then Auto
Channel Set screen
Press MENU. Press rt to place the
pointer next to “AUTO CH SET”, then press
OK or e.
—4—
B
Select your country
Press rt to place the pointer next to your country, then press OK
or e.
C
Select language
Press rt to place the pointer next to the desired language.
● You do not have to press OK; pressing OK enters AUTO SET/T-V
LINK screen.
D
Return to normal screen
Press MENU.
T-V Link Functions
When you connect the recorder to your TV via a fully-wired
21-pin SCART cable, the following functions are available. You
can use these functions only with a TV offering T-V Link, etc.*
For details, refer to the instruction manual of your TV.
* Compatible with TVs offering T-V Link, EasyLink, Megalogic,
SMARTLINK, Q-Link, DATA LOGIC or NexTView Link via fully-wired
21-pin SCART cable. The degree of compatibility and available functions
may differ by system.
NexTView Link
You can download the EPG (Electronic Programme Guide)
information from your TV for timer-programming on the recorder.
TV Auto Power On
The TV will turn on and be set to its AV mode automatically
whenever you play a tape.
VCR Auto Standby
You can use your TV’s remote control to turn off the recorder.
Direct Rec
You can easily start recording the programme that you are
watching on your TV. When you use this function, set “DIRECT
REC” to “ON”. (
墌
12)
Satellite Receiver Control Set
When you use an optional Satellite Controller and perform the
following settings, you can control your satellite receiver’s channel
for timer recording. Approximately 20 seconds before the timer
recording starts, the recorder sets its input mode to “L-2” and the
Satellite Controller switches the satellite receiver’s channels.
NOTE:
The Satellite Controller does not function for 24 Hour Express
Timer Programming.
A
Situate Satellite Controller
Place the Satellite Controller so that the path between its
transmitter and the satellite receiver’s remote sensor is
unobstructed.
B
Attach Satellite Controller
Fix securely using the adhesive strip attached on the back of the
Satellite Controller.
Your recorder
C
Make connections
Connect the recorder’s L-2 IN/DECODER connector to the satellite
receiver’s 21-pin SCART connector.
Satellite receiver
Satellite Controller
(not provided)
(suggested locations)
D
Connect Satellite Controller to recorder
Connect the Satellite Controller to the SAT CONTROL connector
on the rear panel.
Satellite receiver
Transmitter
Satellite Controller
(not provided)
E
Turn on satellite receiver
21-pin SCART cable
(not provided)
To SAT CONTROL
Your recorder
To VCR
connector
To L-2 IN/
DECODER
Turn on the satellite receiver’s power.
F
Access Main Menu screen, then Initial Set screen
Press MENU. Press rt to place the pointer next to “INITIAL
SET”, then press OK or e.
G
Access Sat Control Set screen
Press rt to place the pointer next to “SAT CONTROL SET”, then
press OK or e.
H
Enter satellite receiver’s brand
Press the appropriate number keys to enter
the brand code from the following list,
then press OK.
● If the code you entered is invalid, the
code field will be reset. Enter the correct
code again.
BRAND NAME CODE BRAND NAME CODE
JVC
AMSTRAD
CANA L
SATELLITE
CANAL +
D-BOX
ECHOSTAR
(VIA DIGITAL)
FINLUX
FORCE
GALAXIS
GRUNDIG
HIRSCHMANN
HUMAX
ITT NOKIA
KATHREIN
LUXOR
MASCOM
I
Select satellite receiver’s channel for testing
73
60, 61, 62, 63, 92
81
81
85
82
68
89
88
64, 65, 102
64, 78, 99
88
68
70, 71, 96
68
93
MASPRO
NOKIA
PACE
PANASONIC
PHILIPS
RADIX
RFT
SABA
SAGEM
SALORA
SAMSUNG
SIEMENS
SKYMASTER
TECHNISAT
THOMSON
TPS
TRIAX
WISI
70
87, 94
65, 67, 74, 86, 92
74, 92
66, 84, 101
78
69
97
83, 90
68
83
64
69, 98
66, 100
97
83
91
64
Press the appropriate number keys to enter the channel position
on the satellite receiver, then press OK. The recorder enters the test
mode.
J
Check result of the test
If the satellite receiver’s channel number
has been changed to the same one as you
set in step
9999
…
Press rt to place the pointer next to
“CHANGED TO …”, then press OK or e
to finish the Sat Control Set mode.
If the satellite receiver’s channel number
has not been changed correctly …
Press rt to place the pointer next to “NOT CHANGED”, then
press OK or e. Then perform the procedure again from step
NOTE:
The Satellite Controller may not function properly with some types
of satellite receiver.
—5—
8888.
Playback
A
Basic Playback
Turn on the TV and select the video channel or AV mode.
A
Load a cassette
Make sure the window side is
up, the rear label side is facing
you and the arrow on the front of
the cassette is pointing towards
the recorder.
● Do not apply too much pressure when inserting.
● The recorder turns on, and the counter is reset, automatically.
● If the cassette’s record safety tab has been removed, playback
begins automatically.
B
Start playback
Press 4.
When the tape is not running
Rewind/fast-forward at high speed
Press 3 or 5.
Eject the cassette
Press 0.
● You can also eject the cassette when the recorder is turned off.
Turn off the recorder
Press 1.
TTENTION:
In the search, still, slow-motion or frame-by-frame playback
mode,
● the picture will be distorted
● the noise bars will appear
● there will be a loss of color with an LP-recorded tape
Playback Features
During playback
Stop playback
Press 8 on the remote
control.
Pause playback and view still picture
Press 9.
● Press 4 to resume normal playback.
● If there is vertical jitter, press PR + or – to correct the picture.
Pause and Frame-by-Frame playback
Press 9 to pause, then press w or e (or 9) repeatedly.
● Press 4 to resume normal playback.
High-Speed Search
Press 3 or 5.
● Press 4 to resume normal playback.
● If you press and hold 3 or 5 for more than 2 seconds,
simply releasing it cancels the picture search, and normal
playback resumes.
Variable Speed Search (including slow-motion)
Press w or e repeatedly.
● Press 4 to resume normal playback.
● Each time you press w or e, the playback speed changes. To
decrease the speed during picture search, press the opposite
direction button repeatedly.
● During still picture, press and hold e to start forward (or w to
start reverse) slow motion playback. When you release the
button, still picture resumes. During still picture, holding 9 for
more than 2 seconds also starts forward slow motion playback.
If you press 9 again, still picture resumes.
● During slow motion playback, some noise may appear on the
TV screen. Press PR + or – to eliminate the noise.
Reverse Forward
Reverse
search
3steps
Reverse
play
OR Press 0 on the recorder.
Reverse
slow
motion
2steps
Slow
motion
2steps
Normal
play
Forward
search
4steps
Adjusting tracking condition
Automatic tracking adjustment
When a new cassette is loaded, the recorder enters the automatic
tracking mode.
Manual tracking adjustment
If automatic tracking cannot eliminate noises well during
playback, adjust the tracking manually.
A
Press p during playback to activate manual tracking.
B
Press PR + or – to eliminate the noises. Press it briefly for a fine
adjustment, or press and hold for a coarse adjustment.
● Press p again to reactivate automatic tracking.
Selecting Soundtrack
Your recorder is capable of recording three soundtracks (HIFI L j,
HIFI h R and NORM) and plays back the one you select.
Pressing AUDIO changes the soundtrack as follows:
HIFI L jhR : For Hi-Fi stereo tapes
HIFI L j : For main audio of Bilingual tapes
HIFI h R : For sub audio of Bilingual tapes
NORM : For audio-dubbed tapes
HI FI NORM : For audio-dubbed tapes
NOTE:
Set “O.S.D.” to “ON” to display the indications on the screen.
(
12)
墌
Automatic operations after rewinding
— Next Function Memory
The Next Function Memory “tells” the recorder what to do after
rewinding. Ensure that the recorder is in stop mode.
● For Automatic Playback Start
Press 3, then press 4 within 2 seconds.
● For Automatic Power Off
Press 3, then press 1 within 2 seconds.
● For Automatic Timer Standby
Press 3, then press # within 2 seconds.
NOTE:
It is not possible to select the Automatic Timer Standby function if
the cassette’s record safety tab is removed.
—6—
Playing back tape repeatedly (100 times)
r
— Repeat Playback
During playback, press and hold 4 for more than 5 seconds. “$”
on the display panel starts blinking slowly. To stop playback, press
8 on the remote control or 0 on the recorder.
NOTE:
Pressing 4, 3, 5 or 9 also stops Repeat Playback.
Recording
Accidental erasure prevention
To prevent accidental recording on a
recorded cassette, remove its record
safety tab. To record on it later, cover
the hole with adhesive tape.
Record safety tab
Locating beginning of recordings
— Index Search
Index codes are placed on the tape at the
beginning of each recording when
recording on this recorder.
A
While the tape is not running, press w or
e (2 or 6 ) to start search.
B
To access a recording of 2 to 9 index
codes away, press w or e (2 or 6 )
repeatedly until the correct number is displayed on the screen
(only if “O.S.D.” is set to “ON” (
Example:
To locate the beginning of B from
the current position, press w
twice.
To locate the beginning of D from
the current position, press e
once.
● Playback begins automatically
when the desired recording is
located.
墌
12)).
Current position
Index numbe
Locating beginning of timer recordings
— Instant Review
After ensuring that the recorder is turned off and that the timer
mode is disengaged, press REVIEW.
● The recorder turns on, and rewinds to the index code indicating
the beginning of the last timer-recorded programme, then begins
playback automatically.
● You can access a programme as far as
9 index codes away from the current
tape position. For example, if you have
timer-recorded 3 programmes, the
REVIEW indicator and “3” blink. To watch the first of the
3 programmes, press REVIEW three times.
● The number of recorded programmes is not displayed on the
display panel after Automatic Satellite Programme Recording.
● The Instant Review function can also operate if the recorder is
turned on.
Basic Recording
Turn on the TV and select the video channel or AV mode.
A
Load a cassette
Make sure the record safety tab is intact. If not, cover the hole with
adhesive tape before inserting the cassette.
● The recorder turns on, and the counter is reset, automatically.
B
Select recording channel
Press PR+/– or the number keys.
● You can select channel in the stop mode or recording pause mode.
C
Set tape speed
Press SP/LP (p). The current setting for the tape speed appears
on the display panel and the screen for about 5 seconds. Press SP/
LP (p) again to change the setting while tape speed is displayed.
D
Start recording
On the recorder, press 7. Or on the remote control, while holding
7, press 4.
● If the tape reaches its end during recording, the recording stops
and “
” and “$” on the display panel blink. Press 0 on the
䡬
recorder to eject the cassette or press 3 to rewind the tape.
● When “DIRECT REC” is set to “ON” (
button just after pressing 7 on the recorder (or 7 and 4 on the
remote control), the recorder may not function properly.
12), if you press any
墌
During recording
Pause recording
Press 9.
● Press 4 to resume recording.
● You can select channel in the recording pause mode.
Stop recording
Press 8 on the remote
control.
OR Press 0 on the recorder.
Recording Features
Skipping unwanted portions
— Skip Search
Press 30 SEC once to 4 times during playback. Each press
initiates a 30-second period of high-speed playback (up to
2 minutes). When the specified portion of the tape is skipped,
normal playback resumes automatically. To return to normal
playback during Skip Search, press 4.
Recording Resume Function
If there is a power outage during recording (or Instant Timer
Recording, or timer recording), the recording will resume
automatically when the power is restored to the recorder. (No
setting is required for this function.)
NOTE:
If a power outage exceed the recorder’s memory backup time,
Recording Resume Function does not work.
Tape Remaining Time/Time Counter
Press ––:–– to display the tape remaining time and time counter
on the screen. To reset the time counter, press 0000.
NOTES:
● Set “O.S.D.” to “ON” to display the indications on the screen.
(
12)
墌
● Depending on the type of tape used, the tape remaining time
may not appear right away, or is not correct. “– –:– –” may
sometimes appear, or the display may blink on occasion.
—7—
Watching one programme while recording another
If your recorder is connected to the TV via the AV connection,
press TV/VCR. The recorder’s VCR indicator and the TV broadcast
being recorded disappear. Once recording is in progress, all you
need to do is to set the channel controls on the TV for the station
you wish to view.
● The programme selected with the TV’s channel controls appears
on the screen, while the one selected with the PR+/– is recorded
on the tape.
● If a decoder is connected to the recorder, you can select a
scrambled channel as well with the TV channel controls.
Specifying recording length
— Instant Timer Recording (ITR)
During recording, press 7 on the recorder repeatedly until the
desired recording length appears on the display panel. “
display panel starts blinking.
● Each time you press the button, recording length increases in
30-minute intervals (up to 6 hours).
● The recorder turns off after recording is finished.
● To cancel an ITR, press 8 on the remote control or 0 on the
recorder.
” on the
䡬
Receiving stereo and bilingual programmes
Your recorder is equipped with a Sound-Multiplex decoder (A2)
and a Digital stereo sound decoder (NICAM) as well, making
reception of stereo and bilingual broadcasts possible.
When the channel is changed, the type of broadcast being
received will be displayed on the screen for a few seconds.
Type of broadcast being received On-screen display
A2 Stereo
A2 Bilingual
Regular Monaural
NICAM Stereo
NICAM Bilingual
NICAM Monaural
● To listen to a stereo programme, press AUDIO until
“HIFI L jhR” appears on the screen.
● To listen to a bilingual programme, press AUDIO until
“HIFI L j” or “HIFI h R” appears on the screen.
● To listen to the standard (regular monaural) audio while
receiving a NICAM broadcast, press AUDIO until “NORM”
appears on the screen.
NOTE:
Set “O.S.D.” to “ON” to display the indications on the screen.
(
12)
墌
To record stereo and bilingual programmes (A2)
● Stereo programmes are automatically recorded in stereo on the
Hi-Fi audio track (with the normal audio track recording mixed
L and R channel sound).
● Bilingual programmes are automatically recorded in bilingual
on the Hi-Fi audio track. The main soundtrack is recorded on
the normal audio track.
ST
BIL.
(none)
ST NICAM
BIL. NICAM
NICAM
HOWVIEW
S
Set the Guide Program numbers manually only in the following
cases:
● When you select a country in Central or Eastern Europe for
country setting.
OR
● When timer-programming with the S
channel position, where the station you wish to record is
received on your recorder, is not selected.
OR
● When you add a channel after Auto Set Up, Preset Download or
Auto Channel Set has taken place.
OR
● When you wish to timer-record a satellite programme with the
S
HOWVIEW
®
System Setup
system.
HOWVIEW
system, the
Guide Program Number Set
“Guide Program (GUIDE PROG) number” refers to the assigned
TV station numbers, according to broadcast area, for the
S
HOWVIEW
found in most TV listings.
● If the Guide Program numbers are not set properly when you
timer-record a TV programme using the S
recorder will record a TV programme of a different station.
When programming the timer using the S
sure to check the desired channel is selected correctly.
A
Press MENU. Press rt to place the pointer next to “INITIAL
SET”, then press OK or e.
B
Press rt to place the pointer next to “GUIDE PROG SET”, then
press OK or e.
C
Press rt to select the Guide Program
number as shown in the TV listing, then
press OK or e.
D
Press the number key “0” to select “TV
PROG” or “SAT”.
Press rt to select the number of the channel on which the Guide
Program number’s broadcast is received, then press OK or e.
● To timer-record a satellite programme with the S
system, you need to install an optional Satellite Controller and
perform the procedure described in “Satellite Receiver Control
Set” (
● Repeat steps
E
Press MENU.
timer recording. The Guide Program numbers can be
HOWVIEW
HOWVIEW
Access Main Menu screen, then Initial Set screen
Access Guide Program Set screen
Input Guide Program number
Input receiving channel number
HOWVIEW
5).
墌
3333–4444
as necessary.
Return to normal screen
system, the
system, be
To record NICAM stereo and bilingual programmes
The NICAM audio programme is recorded on the Hi-Fi audio
track, and the standard audio programme on the normal audio
track.
NOTES:
● If the quality of stereo sound being received is poor, the
broadcast may be received in monaural with better quality.
● Before playing back a programme recorded in stereo, or a
bilingual programme, refer to “Selecting Soundtrack” (
墌
6).
—8—
Timer Recording
Up to 8 timer recording programmes can be made.
Before starting:
● If you select a country in Central or Eastern Europe for country
setting, perform “Guide Program Number Set” (
● Set the clock properly. (
● Set “COLOUR SYSTEM” to the appropriate mode. (
● Load a cassette with the record safety tab intact.
墌
13)
NOTES:
● PDC recording is not possible in Central and Eastern Europe.
● If all the 8 programmes have already been set, “PROGRAM
FULL” appears on the screen.
● If there is a conflict in the timer schedule and one programme
overlaps with another, the programme starting earlier or
programme with the lower programme number will be
recorded.
● After timer recording is completed, the recorder turns off
automatically.
● If the tape reaches its end during timer recordings, the recording
stops and “#”, “
# to disengage timer, then press 0 on the recorder to eject
the cassette or press 1 then press 3 to rewind the tape.
● You can programme the timer recording while a regular
recording is in progress; the menu screens will not be recorded.
S
HOWVIEW
The S
HOWVIEW
in most TV listing.
A
Press PROG to access the S
NO. screen.
” and “$” on the display panel blink. Press
䡬
®
Timer Programming
numbers are the numbers next to the programme
HOWVIEW
墌
8).
墌
13)
To timer-record a satellite broadcast using the S
Perform “Satellite Receiver Control Set” (墌5).
A
Perform steps 1
B
“ON”.
Leave the satellite receiver’s power on.
C
1 – 4444. In step 2222, you cannot set “VPS/PDC” to
11
HOWVIEW
system:
Express Timer Programming
A
Press PROG to access the S
–. The program screen appears.
B
Press START+/–, STOP+/–, DATE+/– or
PR+/– repeatedly to enter the start time,
stop time, date or channel.
● Press and hold START+/– or STOP+/– to
increase the time in 30-minute intervals.
● To set the tape speed, press SP/LP (p).
● To set the VPS/PDC mode, press VPS/
PDC (number key “7”).
● To timer-record daily (Monday–Friday) or weekly serials, press
DAILY (number key “8”) or WEEKLY (number key “9”). Pressing
the button again makes the “DAILY” or “WEEKLY” display
disappear.
C
Press OK or PROG.
D
Press #. The recorder turns off automatically and “#” is
displayed on the display panel.
To timer-record a satellite broadcast using Express Timer
Programming:
Perform “Satellite Receiver Control Set” (墌5).
A
Perform steps 1
B
change “TV PROG” to “SAT”. Then press PR+/– to enter the
channel position for the satellite broadcast. You cannot set “VPS/
PDC” to “ON”.
Leave the satellite receiver’s power on.
C
1 – 4444. In step 2222, press the number key “0” to
11
HOWVIEW
screen, then press START+/
B
Press the appropriate number keys to
input the S
OK. The S
appears.
● Make sure the channel position number
● If the number you entered is invalid, “ERROR” appears on the
● If the “GUIDE PROG SET” screen
● To set the tape speed, press SP/LP (p).
● To set the VPS/PDC mode, press VPS/PDC (number key “7”).
● To change the stop time, press STOP+/–.
● To timer-record daily (Monday–Friday) or weekly serials, press
C
D
displayed on the display panel.
HOWVIEW
HOWVIEW
you wish to record is displayed; if not,
see “S
HOWVIEW
and set the Guide Program number
correctly.
screen. Press & and input a valid S
appears, set the Guide Program number.
To set the Guide Program number for the
satellite broadcast station, press the
number key “0” to change “TV PROG”
to “SAT”. Press rt to input the channel
position number on which your recorder
or satellite receiver receives that station.
Then press OK or e to set the Guide Program number. The
S
HOWVIEW
DAILY (number key “8”) or WEEKLY (number key “9”). Pressing
the button again makes the “DAILY” or “WEEKLY” display
disappear.
Press OK or PROG.
Press #. The recorder turns off automatically and “#” is
number, then press
program screen
®
System Setup” (墌8)
Program screen appears.
HOWVIEW
number.
VPS/PDC Recording
Now available from some TV stations, PDC (Programme Delivery
Control) and VPS (Video Programme System) are service designed
to assure safe, accurate timer recording. With this system, your
recorder will start and stop recording when the preset TV
programmes actually start and end — even if the broadcast time of
a preset TV programme is changed.
NOTE:
When you use Express Timer Programming, set the start time (VPS
or PDC time) exactly as advertised in the TV listing.
How to check if the station being received transmits a VPS/PDC
signal (Excepting in Central and Eastern Europe)
Press ––:–– until the channel position appears on the display
A
panel.
Hold down START+ for about 5 seconds. “VPS/PDC” appears
B
blinking on the screen.
If a VPS/PDC signal is detected from the station, “VPS/PDC” will
stop blinking.
If no VPS/PDC signal is detected from the station, “VPS/PDC” will
blink at a slower rate.
Press ––:–– or START+ again to return to normal screen.
C
—9—
Checking, canceling or changing programme
settings
A
Disengage timer recording standby mode
Press #, then press 1.
● When “AUTO TIMER” is set to “ON” (
B
Access Program Check screen
Press ".
C
Access Program screen
Press " again. Each time you press ",
the next programme’s screen appears.
D
Cancel or change programme setting
To cancel a programme, press &.
To change a programme, press the
appropriate button: START+/–, STOP+/–,
DATE +/–, DAILY (number key “8”), WEEKLY (number key “9”),
PR+/–, VPS/PDC (number key “7”) and/or SP/LP (p).
● To change “TV PROG” to “SAT” for the channel position, press
the number key “0”.
E
Return to normal screen
Press " repeatedly until no Program screen is shown.
F
Re-engage timer recording standby mode
Press #. The recorder turns off automatically and “#” is displayed
on the display panel.
● When “AUTO TIMER” is set to “ON” (
recording standby mode automatically resumes when you turn
off the recorder.
12), press only 1.
墌
12), the timer
墌
Automatic Satellite Programme Recording
You can automatically record a satellite programme which is
timer-programmed on your satellite receiver.
A
Connect a satellite receiver to the L-2 IN/DECODER connector
on the rear panel.
B
Set timer programme on satellite receiver referring to its
instruction manual.
C
Load a cassette with the record safety tab intact.
D
Set “L-2 SELECT” to “A/V” or “SAT”. (墌13)
E
To set the tape speed, press SP/LP (p). The current setting for
the tape speed appears on the display panel or the screen for
about 5 seconds. Press SP/LP (p) again to change the setting
while tape speed is displayed.
F
Press SAT# for more than 2 seconds. The recorder turns off
automatically and enter the Automatic Satellite Programme
Recording mode (the SAT# indicator lights up). When signals
come into the recorder from the satellite receiver, the recorder
starts recording (the SAT# indicator blinks). The recorder stops
recording and turns off when signals stop coming in.
NOTES:
● Be sure not to turn on the satellite receiver before the
programme starts broadcasting; otherwise, the recorder starts
recording when the satellite receiver is turned on.
● To disengage the Automatic Satellite Programme Recording
mode, press
● Depending on the type of satellite receiver, Automatic Satellite
Programme Recording may not be compatible.
● B.E.S.T. does not work in the Automatic Satellite Programme
Recording mode.
● Power Save mode does not work in the Automatic Satellite
Programme Recording mode.
● Just Clock does not work in the Automatic Satellite Programme
Recording mode.
# (the SAT# indicator goes off).
SAT
—10—
Editing System Connections
Editing with another video recorder or a
camcorder
You can use your recorder as the source player or the recording
deck. You can use a camcorder as the source player and your
recorder as the recording deck. Refer also to the other
components’ instruction manuals for connection and its
operations.
A
Make connections
Connection with another video recorder
When using your recorder as the source player …
A
… connect its L-1 IN/OUT connector to the recording deck.
When using your recorder as the recording deck …
B
… connect its L-1 IN/OUT or L-2 IN/DECODER connector to the
source player.
Connection with a camcorder
Connect the camcorder’s AUDIO/VIDEO OUT connectors to the
recorder’s L-1 IN/OUT or L-2 IN/DECODER connector via a cable
adapter.
B
Load cassettes
Insert the playback cassette into the source player and the cassette
to be recorded on into the recording deck.
C
Select input mode on recording deck
Select the correct external input on the recording deck. On this
recorder, press AUX and/or PR+/–.
Select “L-1” for the L-1 IN/OUT connector, or “L-2” for the L-2 IN/
DECODER connector.
D
Select edit mode
Select the appropriate edit mode for the components if such a
mode is equipped.
● On this recorder, set “PICTURE CONTROL” to “EDIT”. (
E
Start playback
Engage the Play mode of the source player.
F
Start recording
Engage the Record mode of the recording deck.
墌
12)
NOTE:
When you select a country in Central or Eastern Europe for
country setting, you cannot use decoder with this recorder.
Connecting to a satellite receiver
Connect the decoder to the satellite receiver’s connector if you
have a decoder, L-1 IN/OUT connector to TV’s connector, and L-2
IN/DECODER connector to the satellite receiver’s connector. Then
connect the satellite receiver and TV.
● Set “L-2 SELECT” to “A/V”. (
● To record a programme via the satellite receiver, set the input
mode to “L-2” by pressing AUX and/or PR+/–.
● To receive a scrambled broadcast, descramble the signal with
the satellite receiver.
● For details, refer to the instruction manual for the satellite
receiver and decoder.
墌
13)
Connecting/Using a decoder
You can enjoy the variety of programming that is available through
scrambled channels.
Set “L-2 SELECT” to “DECODER”. (墌13)
A
Connect the recorder’s L-2 IN/DECODER connector to the
B
decoder’s 21-pin SCART connector using a 21-pin SCART cable.
Perform the procedure as described in “When receiving a
C
scrambled broadcast” (
墌
14).
Connecting/Using a stereo system
You can listen to the soundtrack through your stereo system.
Connect the AUDIO OUT L and R connectors on the recorder to
the AUX IN or TAPE MONITOR connectors on your stereo
system’s receiver or amplifier.
● When listening to sound through the connected stereo system,
turn the TV’s volume down completely.
—11—
Subsidiary Settings
Mode Set
You can change various mode settings.
● Turn on the recorder and the TV, and set your TV to its AV mode
or video channel.
A
Access Main Menu screen, then Mode Set screen
Press MENU. Press rt to place the
pointer next to “MODE SET”, then press
OK or e.
B
Select mode
Press rt to place the pointer next to the
item you want to set.
C
Change setting
Press OK or e. The default setting is bold in the following table.
Press MENU to return to normal screen.
B.E.S.T. — ON / OFF
䡵
When B.E.S.T. (Biconditional Equalized Signal Tracking) system is
set to “ON”, the recorder checks the condition of the tape in use
during playback and recording, and compensates to provide the
highest-possible pictures. When B.E.S.T. works, “bESt” appears
blinking on the display panel. B.E.S.T. takes place whenever you
play back a tape or start recording after inserting a cassette.
NOTE:
The recorder checks the tape condition for about 7 seconds, then
starts recording. To make sure you record the desired scene or
programme completely, perform the following steps:
Press and hold 9, and press 7. After about 7 seconds, the
A
recorder re-enters Record Pause mode.
Press 4 to start recording.
B
PICTURE CONTROL — AUTO(NORM) / EDIT / SOFT / SHARP
䡵
This function helps you to adjust the playback picture quality
according to your preference.
AUTO(NORM)
automatically. When “B.E.S.T.” is “OFF”, “NORM” will appear
instead of “AUTO”.
: Minimizes picture degradation during editing (recording and
EDIT
playback).
SOFT
containing much noise.
SHARP
much flat, same-coloured surfaces such as cartoons.
NOTE:
Select “EDIT” when you are editing tapes. After you finish editing,
select “AUTO”.
AUTO TIMER —ON / OFF
䡵
● When this function is set to “ON”:
The timer recording standby mode is automatically engaged when
the recorder is turned off. It is temporarily canceled when the
recorder is turned on. You do not have to press # to engage or
disengage the timer recording standby mode.
● When this function is set to “OFF”:
Press # to engage or disengage the timer recording standby mode.
: Normally select this. Picture quality is adjusted
: Reduces image coarseness when viewing overplayed tapes
: Clearer, sharper-edged picture when viewing images with
O.S.D. — ON / OFF
䡵
When this function is set to “ON”, various recorder status
information (on-screen display) appears on the screen.
NOTE:
When you use the recorder as the source player for editing a tape,
be sure to set this function to “OFF”. Otherwise, the recorder
status information will be recorded on the edited tape.
DIRECT REC — ON / OFF
䡵
When this function is set to “ON”, you can easily start recording
the programme that you are watching on your TV. Press and hold
7 and press 4 on the remote control, or press 7 on the recorder.
NOTES:
● When you use this function, be sure to use a TV offering T-V
LINK, etc. and connect a fully-wired 21-pin SCART cable
between the recorder and the TV.
● When “DIRECT REC” is set to “ON”, if you press any button just
after pressing 7 on the recorder (or 7 and 4 on the remote
control), the recorder may not function properly.
AUTO SP]LP TIMER —ON / OFF
䡵
When this function is set to “ON”, the recorder automatically
switches to LP mode to allow complete recording if there is not
enough tape to record the entire programme while timer-recording
in SP mode.
For example, recording a programme of 210 minutes in length
onto a 180 minute tape.
Approximately 150 minutes Approximately 60 minutes
SP mode LP mode
Total 210 minutes
NOTES:
● If you have programmed the recorder to timer-record 2 or more
programmes, do not use this function, but change the tape
speed manually during timer programming.
● There may be some noise and sound disturbance where the tape
speed switches from SP to LP mode on the tape.
● This function is not available during ITR (Instant Timer
Recording), and will not work properly with any tapes longer
than E-180 or with some tapes of shorter lengths.
● If you perform timer recording with both this function and VPS/
PDC activated, and the programme goes beyond its originally
scheduled length, sometimes the programme cannot be
recorded in its entirety.
POWER SAVE —ON / OFF
䡵
When this function is set to “ON”, you can reduce the power
consumption while the recorder is turned off.
NOTES:
● During Power Save mode,
• the display panel is turned off,
• the Just Clock does not work,
• and the picture may be distorted momentarily when you turn
on/off the recorder.
● Power Save does not work in the following cases:
• When “L-2 SELECT” is set to “DECODER” or “SAT”,
• or when the recorder is in the timer recording standby mode,
• or in the Automatic Satellite Programme Recording mode,
• or when the recorder’s power is turned off after timer-
recording or ITR (Instant Timer Recording).
—12—
L-2 SELECT — A/V / DECODER / SAT
䡵
Select the appropriate mode depending on the type of unit
connected to the L-2 IN/DECODER connector of the recorder.
: To use the recorder as the recording deck with the player
A/V
connected to the L-2 IN/DECODER connector, or to use the
satellite receiver connected to the L-2 IN/DECODER connector.
DECODER
connector.
● When you select a country in Central or Eastern Europe for
SAT
recorder is turned off.
● When the recorder is in stop or recording mode, press TV/VCR
䡵
You can play back PAL, NTSC and MESECAM tapes, or record PAL
and SECAM* signals on this recorder. Select the appropriate
colour system.
* SECAM signals will be recorded as MESECAM on this recorder;
PAL/NT SC
MESECAM
tape.
: To use a decoder connected to the L-2 IN/DECODER
country setting, you cannot use a decoder with this recorder.
: To view a satellite programme with the TV set while the
to turn off the VCR indicator on the display panel. If you turn on
the recorder when the satellite receiver’s power is off, nothing
appears on the screen. In this case, turn on the satellite receiver,
or set the TV to its TV mode, or press TV/VCR to set the recorder
to the video mode.
COLOUR SYSTEM — PAL/NTSC / MESECAM
MESECAM is the designation for tapes with SECAM signals that have been
recorded on a MESECAM-compatible PAL video cassette recorder.
: To record PAL signals, or playback a PAL or NTSC tape.
: To record SECAM signals, or play back a MESECAM
NOTES:
About NTSC Playback
● Some TVs shrink the picture vertically and place black bars at
the top and bottom of the screen, or cut off the top and bottom
portions of superimposed displays. This is not a malfunction.
● The picture may roll up and down. This can be corrected if your
TV has the V-HOLD control function.
● The counter and tape remaining time readings will be incorrect.
● During search, still, or frame-by-frame playback, the picture will
be distorted, and there may be a loss of colour.
AUTO POWER OFF —3H / OFF
䡵
When this function is set to “3H”, the recorder turns off
automatically if no operation is done in 3 hours. “AUTO POWER
OFF IN 3MIN” appears on the screen 3 minutes before the
recorder is turned off.
Clock Set
● Turn on the recorder and the TV, and set your TV to its AV mode
or video channel.
A
Access Main Menu screen, then Initial Set screen
Press MENU. Press rt to place the pointer next to “INITIAL
SET”, then press OK or e.
B
Access Clock Set screen
Press rt to place the pointer next to “CLOCK SET”, then press
OK or e.
C
Set time, date and year
Press rt until the desired time appears,
then press OK or e. Set the date and year
in the same way.
● Holding rt changes the time in
30-minute intervals, or changes the date
in 15-day intervals.
D
Set Just Clock
Set to “ON” or “OFF” by pressing rt, then press OK or e.
Just Clock
The Just Clock function provides accurate time keeping through
automatic adjustments at regular intervals, by reading data from a
PDC signal. Normally, set “JUST CLOCK” to “ON”.
NOTES:
● Just Clock may not function properly depending on the
reception condition.
● When you select a country in Central or Eastern Europe for
country setting, you cannot use Just Clock. Skip steps
E
Set source channel position
The recorder is preset to receive clock setting and adjustment data
from channel position 1. Press rt to set the channel position to
the number representing the station transmitting clock setting
data, then press OK or e.
F
Start clock
Press MENU.
4444 – 5555.
Tuner Set
Perform the following steps only if the tuner has not been set
correctly by Auto Set Up or Preset Download, or if you have
moved to a different area, or if a new station starts broadcasting in
your area.
The recorder needs to memorise all necessary stations in channel
positions in order to record TV programmes. Auto Channel Set
automatically assigns all receivable stations in your area.
NOTE:
When you select a country in Central or Eastern Europe for
country setting, Guide Program numbers are not set automatically.
(
8, “Guide Program Number Set”)
墌
Auto Channel Set
A
Access Main Menu screen, then Auto Channel Set screen
Press MENU. Press rt to place the pointer next to “AUTO CH
SET”, then press OK or e.
B
Select your country
Press rt to place the pointer next to your country, then press OK
or e.
C
Select language
Press rt to place the pointer next to the desired language.
D
Perform Auto Channel Set
Press OK twice. When Auto Channel Set is
completed, “SCAN COMPLETED” is
displayed on the screen for about
5 seconds, then the Confirmation screen
appears.
● When you select a country in Central or
Eastern Europe for country setting, station names (ID) are not
stored automatically. Change station names manually. (
E
Return to normal screen
Press MENU.
NOTES:
● Depending on reception conditions, the stations may not be
stored in order, and the station names may not be stored
correctly.
● If no sound accompanies the picture or the audio sounds
unnatural on some channels, select the appropriate TV system
for those channels.
● To delete stations with poor reception condition, refer to
“Deleting a channel” (
墌
14).
墌
15)
—13—
Manual Channel Set
A
Store channels that were not stored during Auto Set Up, Preset
Download or Auto Channel Set.
TTENTION:
Guide Program numbers are not set when channels are stored
manually. Perform “Guide Program Number Set” (
A
Access Main Menu screen, then
Confirmation screen
Press MENU. Press rt to place the
pointer next to “MANUAL CH SET”, then
press OK or e.
B
Select position
Press rt w e until an open channel position begins blinking,
then press OK. The Manual Channel Set screen appears.
C
Select band
Press rt to select CH (regular) or CC
(cable), then press e.
D
Input channel
Press the number keys to input the channel
number you want to store. Input “0” before
any single number entries.
● To input the registered station name (ID), press e until “– – – –”
begins blinking, then press rt.
● When “L-2 SELECT” is set to “A/V” or “SAT”, the “DECODER”
setting cannot be changed. (
● When you select a country in Central or
Eastern Europe for country setting, “TV
SYSTEM” setting appears instead of
“DECODER” setting. When you can see
the picture but can hear no audio, select
appropriate TV system (For Central or
Eastern Europe: D/K or for Western
Europe: B/G).
Press e until D/K or B/G blinking. Then press rt to select D/K
or B/G.
Major Countries TV System
Austria, Denmark, Finland, Holland, Italy,
Norway, Spain, Switzerland, Sweden,
Germany, Egypt
China, Mongolia, Rumania, Bulgaria, Czech
Rep., Slovakia, Hungary, Poland, Russia
E
Store new channel
Press OK.
● Repeat steps
F
Return to normal screen
Press MENU.
2222–5555
as necessary.
墌
13)
墌
8).
B/G
D/K
Changing station channel positions
A
Access Confirmation screen
Perform step
B
Select position
Press rt w e until the station you want to move begins blinking,
then press OK. The channel number (CH) and the station name
(ID) begin blinking.
C
Select new position
Press rt w e to move the station to the new position, then press
OK.
Example: If you moved the station in position 4 to position 2, the
stations originally in positions 2 and 3 each move down one
space.
● Repeat steps
D
Return to normal screen
Press MENU.
1111
of “Manual Channel Set” (墌14).
2222–3333
as necessary.
When receiving a scrambled broadcast
NOTE:
When you select a country in Central or Eastern Europe for
country setting, you cannot use decoder with this recorder.
A
Select decoder mode
Set “L-2 SELECT” to “DECODER”. (墌13)
B
Access Confirmation screen
Perform step 1
C
Select position
Press rt w e to select the channel broadcasting scrambled
programmes, then press OK twice.
D
Change decoder setting
Press e until “OFF” begins blinking, and set it to “ON” by
pressing rt. Then press OK.
● Repeat steps
E
Return to normal screen
Press MENU.
1 of “Manual Channel Set” (
11
3333–4444
as necessary.
墌
14).
Deleting a channel
A
Access Confirmation screen
Perform step 1
B
Select position
Press rt w e to until the channel you want to delete begins
blinking.
C
Delete channel
Press &. The channel directly beneath the cancelled one moves
up one line.
● Repeat steps
D
Return to normal screen
Press MENU.
1 of “Manual Channel Set” (
11
2222 – 3333 as necessary.
墌
14).
—14—
Changing station name (A)
A
Access Confirmation screen
Perform step
B
Select position
1111
of “Manual Channel Set” (墌14).
Press rt w e until the desired channel begins blinking, then
press OK twice. The Manual Channel Set screen appears.
C
Select station name
Press e until the station name (ID) begins blinking. Press rt until
the desired station name appears, then press OK.
● Repeat steps
D
Return to normal screen
2222 – 3333 as necessary.
Press MENU.
Changing station name (B)
A
Access Confirmation screen
Perform step
B
Select position
1111
of “Manual Channel Set” (墌14).
Press rt w e until the desired channel begins blinking, then
press OK twice. The Manual Channel Set screen appears.
C
Select character for station name
Press e until the first letter of the station name (ID) begins
blinking.
D
Enter new character
Press rt to cycle through the characters, then press e. Enter the
remaining characters the same way (maximum of 4). After entering
all characters, press OK.
● The characters available for the station name (ID) are A–Z, 0–9,
–, f, +, I (space).
● If you make a mistake, press w until the incorrect character
begins blinking. Then enter the correct character by pressing
rt.
E
Return to normal screen
Press MENU.
Fine-tuning channels
A
Access Confirmation screen
Perform step
B
Select position
Press rt w e until the channel you want to tune begins blinking,
then press OK twice. The Manual Channel Set screen appears.
C
Perform tuning
Press e until “+/–” begins blinking, then press rt until the
picture is its clearest. Then press OK.
● Repeat steps
D
Return to normal screen
Press MENU.
1111
of “Manual Channel Set” (墌14).
2222 – 3333 as necessary.
TV station and ID list
ID* STATION NAME ID* STATION NAME
1000
3SAT
9LIV
ADLT
ANT3
ARD
ARTE
B1
BBC
BBC1
BBC2
BR3
C+
C1
CAN5
CANV
CH4
CH5
CHLD
CINE
CLUB
CMT
CNN
CSUR
DISC
DR
DR2
DRS
DSF
ETB1
ETB2
EURO
EUSP
FEMM
FILM
FNET
FR2
FR3
GALA
HR3
INFO
ITA1
ITA7
ITV
JSTV
KA2
KAB1
KAN2
LOCA
M6
MBC
MCM
MDR
MOVE
MTV
MTV3
N3
N-TV
NBC
NDR3
NED1
NED2
NED3
NEWS
NICK
NRK
NRK2
TV1000
3SAT
9LIVE
ADULT
ANTENA3
ARD
ARTE
BERLIN1
BBC GROUP
BBC1
BBC2
BAYERN3
CANA L PLUS
PORTUGUSES
CANALE5
KETNET CANVAS
CHANNEL4
CHANNEL5
CHILD
CINEMA
TELECLUB
CMT
CNN
ANDALUCIA
DISCOVERY
DR TV
DR2
DRS
DSF
ETB1
ETB2
EURONEWS
EUROSPORTS
FEMMAN
FILM
FILMNET
France2
France3
GALAVISION
HESSEN3
INFO-KANAL
ITALIA1
ITALIA7
ITV
JSTV
KA2
KABEL1
KANAL2
LOCAL
M6
MBR
MCM
MDR
MOVIE
MTV
MTV3
NORD3
N-TV
NBC SUPER
NDR3
NED1
NED2
NED3
NICKELODEON
NRK
NRK2
ODE
ORF1
ORF2
ORF3
OWL3
PREM
PRO7
RAI1
RAI2
RAI3
RET4
21
RTBF
RTL
RTL2
RTL4
RTL5
RTP
S4
SAT1
SBS
SF1
SF2
SHOW
SIC
SKY
SKYN
SPRT
SRTL
STAR
SVT1
SVT2
SWR
TCC
TELE
TEL5
TF1
TMC
TNT
TRT
TSI
TSR
TV1
TV2
TV4
TV5
TV6
TVE1
TVE2
TVG
TVI
TVN
VCR
VERO
VH-1
VIVA
VIV2
VMTV
VOX
VT4
VTM
WDR1
WDR3
YLE1
YLE2
ZDF
ZTV
ODEON
ORF1
ORF2
ORF3
OWL3
PREMIERE
PRO7
RAI1
RAI2
RAI3
RETE4
TELE21
RTBF1 / 2
RTL
RTL2
RTL4
RTL5
RTP
SCHWEIZ4
SAT1
SBS
SF1
SF2
SHOW
SOCIEDADE
SKY CHANNEL
SKY NEWS
SPORT
SUPER RTL
STAR-TV
SVT1
SVT2
SUEDWEST3
TCC
TELE
TELE5
TF1
TELEMONTECARLO
TNT INT
TRT INT
TSI
TSR
BRTN TV1
TV2
TV4
TV5
TV6
TVE1
TVE2
TV GALICIA
TV INDEPENDENT
TV NORGE
VIDEO
VERONICA
VH-1
VIVA
VIVA2
VIDEO MUSIC
VOX
VT4
VTM
West1
West3
YLE1
YLE2
ZDF
ZTV
* The “ID” abbreviation is what is shown on-screen in lieu of the
station name. The “ID” abbreviation is listed in the Confirmation
screen and is displayed on the screen when the recorder is
tuned to a different station.
—15—
Video Channel Set
Video channel (RF output channel) is the channel on which your
TV receives picture and sound signals from the recorder through
the RF cable.
Perform the following steps only if —
— Video Chennel Set has not been done correctly by the Auto Set
Up function (
— you set up the recorder’s tuner by Preset Download (
instead of using the Auto Set Up function,
— interference appears in the TV picture after you have moved to
a different area or a new station has started broadcasting in your
area,
— you change the connection between your recorder and TV
from RF connection to AV connection, or vice versa.
If you have connected the recorder to your TV via the AV
connection, set the video channel to off.
If you have connected the recorder to your TV via the RF
connection, set the correct video channel.
●
Make sure the recorder’s power is off and there is no cassette
inserted in the recorder.
A
Access Video Channel Set mode
Hold down 0 on the recorder until the
display panel shows the following.
B
Set RF output system
The blinking number on the display
indicates the RF output system of your
country. Press rt to set to “1” or “2”, then press OK. (1: B/G
2: D/K)
Austria, Denmark, Finland, Holland, Italy,
Norway, Spain, Switzerland, Sweden,
Germany, Egypt
China, Mongolia, Rumania, Bulgaria, Czech
Rep., Slovakia, Hungary, Poland, Russia
C
Set video channel
With AV connection
Press PR – until the display panel shows
“1 – –” (or “2 – –”).
●
Now the video channel is set to off.
With RF connection
Press PR + or – to set the video channel to a vacant position
between 22 and 69 which is not occupied by any local station in
your area.
(Example) If channel 50 is available in your
area, set the video channel to 50.
Then, set your TV to UHF channel 50.
●
If the two vertical white bars appear
clearly on the screen as shown on the right, go
to step
●
If the two vertical white bars do not appear
clearly, re-set the video channel to another
vacant position and try again.
D
Exit Video Channel Set mode
Press OK.
With AV connection
To view picture signals from the recorder, set your TV to its AV
mode.
With RF connection
The channel on which the two vertical white bars appear
clearly is your video channel. To view picture signals from the
recorder, set your TV to the video channel.
4),
墌
Major Countries TV System
4444.
墌
B/G
D/K
4)
Specifications
GENERAL
Power requirement : AC 220 V – 240 Vd, 50 Hz/60 Hz
Power consumption
Power on : 15 W
Power off : 3.3 W
Te m pe r at u r e
Operating : 5°C to 40°C
Storage : –20°C to 60°C
Operating position : Horizontal only
Dimensions (W x H x D) : 400 mm x 94 mm x 270 mm
Weight : 3.1 kg
Format : VHS PAL standard
Maximum recording time
(SP) : 240 min. with E-240 video cassette
(LP) : 480 min. with E-240 video cassette
VIDEO/AUDIO
Signal system : PAL-type colour signal and CCIR
Recording system : DA4 (Double Azimuth) head helical
Signal-to-noise ratio : 45 dB
Horizontal resolution : 250 lines
Frequency range
Normal audio : 70 Hz to 10,000 Hz
Hi-Fi audio : 20 Hz to 20,000 Hz
Input/Output : 21-pin SCART connectors:
TUNER/TIMER
TV channel storage
capacity
Tuning system : Frequency synthesized tuner
Channel coverage
VHF : 47 MHz – 89 MHz/
UHF : 470 MHz – 862 MHz
Aerial output : UHF channels 22 – 69 (Adjustable)
Memory backup time : Approx. 10 min.
ACCESSORIES
Provided accessories : RF cable,
Optional accessories : Satellite Controller RM-SD1
Specifications shown are for SP mode unless specified otherwise.
E. & O.E. Design and specifications subject to change without
notice.
monochrome signal, 625 lines
50 fields
scan system
IN/OUT x 1, IN/DECODER x 1
RCA connectors:
AUDIO OUT x 1
: 99 positions (+AUX position)
104 MHz – 300 MHz/
302 MHz – 470 MHz
Infrared remote control unit,
“R6” battery x 2
—16—
Loading...