JVC GZ-MS130, LYT2019-001B-M User Manual
LYT2019-001B-M
INSTRUCTIONS
MANUAL DE INSTRUCCIONES
MEMORY CAMERA
VIDEOCÁMARA CON MEMORIA
GZ-MS130
Please read the instruction manual prior to
connecting or operating this product.
Por favor, lea el manual de instrucciones
antes de conectar u operar este producto.
For more details on the
operations, refer to the
GUIDEBOOK in the supplied
CD-ROM.
Para obtener más
información sobre las
operaciones, consulte la
GUÍA incluida en el CD-ROM
suministrado.
U
Dear Customer
Thank you for purchasing
this memory camera. Before
use, please read the safety
information and precautions
contained in pages 2 and 3 to
ensure safe use of this product.
For Future Reference:
Enter the Model No. (located
on the bottom of the memory
camera) and Serial No. (located
on the battery pack mount of the
camcorder) below.
Model No.
Serial No.
Apreciado cliente
Muchas gracias por haber
adquirido esta videocamara con
memoria. Antes de usarla, lea la
informacion de seguridad y las
precauciones contenidas en las
paginas 2 y 3 para garantizar un
uso seguro de este producto.
Para futuras consultas:
Escriba a continuación el número de
modelo (ubicado en la parte inferior
de la videocámara) y el número de
serie (ubicado en el compartimiento
de la batería de la videocámara).
Número de modelo
Número de serie
SPEN
ENGLISH
ESPANOL
Safety Precautions
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
The lightning flash with arrowhead symbol, within an
equilateral triangle, is intended to alert the user to the
presence of uninsulated "dangerous voltage" within the
product's enclosure that may be of sufficient magnitude
to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is
intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in
the literature accompanying the appliance.
WARNING: TO PREVENT FIRE OR
SHOCK HAZARD, DO NOT EXPOSE THIS
UNIT TO RAIN OR MOISTURE.
NOTES:
The rating plate and safety caution are on the
•
bottom and/or the back of the main unit.
The serial number plate is on the battery pack
•
mount.
The rating information and safety caution of the
•
AC adapter are on its upper and lower sides.
For USA-California Only
This product contains a CR Coin Cell Lithium
Battery which contains Perchlorate Material
– special handling may apply.
See www.dtsc.ca.gov/hazardouswaste/perchlorate
Caution on Replaceable lithium battery
The battery used in this device may present a fire
or chemical burn hazard if mistreated.
Do not recharge, disassemble, heat above 100°C
or incinerate.
Replace battery with Panasonic (Matsushita
Electric), Sanyo, Sony or Maxell CR2025.
Danger of explosion or Risk of fire if the battery is
incorrectly replaced.
Dispose of used battery promptly.
•
Keep away from children.
•
Do not disassemble and do not dispose of in fire.
•
When the equipment is installed in a cabinet or on
a shelf, make sure that it has sufficient space on
all sides to allow for ventilation (10 cm (3-15/16
or more on both sides, on top and at the rear).
Do not block the ventilation holes.
(If the ventilation holes are blocked by a
newspaper, or cloth etc. the heat may not be able
to get out.)
No naked flame sources, such as lighted candles,
should be placed on the apparatus.
When discarding batteries, environmental
problems must be considered and the local rules
or laws governing the disposal of these batteries
must be followed strictly.
The apparatus shall not be exposed to dripping
or splashing.
Do not use this equipment in a bathroom or
places with water.
Also do not place any containers filled with water
or liquids (such as cosmetics or medicines, flower
vases, potted plants, cups etc.) on top of this unit.
(If water or liquid is allowed to enter this
equipment, fire or electric shock may be caused.)
Do not point the lens directly into the sun. This
can cause eye injuries, as well as lead to the
malfunctioning of internal circuitry. There is also a
risk of fire or electric shock.
CAUTION!
The following notes concern possible physical
damage to the camcorder and to the user.
Carrying or holding the camcorder by the LCD
monitor can result in dropping the unit, or in a
malfunction.
Do not use a tripod on unsteady or unlevel surfaces.
It could tip over, causing serious damage to the
camcorder.
CAUTION!
Connecting cables (Audio/Video, S-Video, etc.)
the camcorder and leaving it on top of the TV is
not recommended, as tripping on the cables will
cause the camcorder to fall, resulting in damage.
CAUTION:
The mains plug shall remain readily operable.
WARNING:
Batteries, including lithium batteries installed in
the camcorder and the remote control, should
not be exposed to excessive heat such as direct
sunshine, fire or the like.
")
to
EN2
IMPORTANT SAFETY INSTRUCTIONS
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings. Install
in accordance with the manufacturer’s
instructions.
8. Do not install near any heat sources such
as radiators, heat registers, stoves, or other
apparatus (including amplifiers) that produce
heat.
9. Only use attachments/accessories specified by
the manufacturer.
10. Use only with the cart,
stand, tripod, bracket,
or table specified by
the manufacturer,
or sold with the
apparatus. When a cart
is used, use caution
when moving the
cart/apparatus combination to avoid injury from
tip-over.
11. Unplug this apparatus during lightning storms
or when unused for long periods of time.
12. Refer all servicing to qualified service
personnel. Servicing is required when the
apparatus has been damaged in any way, such
as power-supply cord or plug is damaged,
liquid has been spilled or objects have fallen
into the apparatus, the apparatus has been
exposed to rain or moisture, does not operate
normally, or has been dropped.
Remember that this camcorder is intended for
private consumer use only.
Any commercial use without proper permission
is prohibited. (Even if you record an event such
as a show, performance or exhibition for personal
enjoyment, it is strongly recommended that you
obtain permission beforehand.)
Trademarks
Manufactured under license from Dolby
•
Laboratories. Dolby and double-D symbol are
trademarks of Dolby Laboratories.
Windows® is either a registered trademark or
•
trademark of Microsoft Corporation in the United
States and/or other countries.
Macintosh is a registered trademark of Apple
•
Inc.
YouTube and the YouTube logo are trademarks
•
and/or registered trademarks of YouTube LLC.
iTunes is a trademark of Apple Inc., registered
•
in the U. S. and other countries.
Other product and company names included
•
in this instruction manual are trademarks
and/or registered trademarks of their respective
holders.
If this symbol is shown, it is only
valid in the European Union.
EN3
Easy Start Guide
Charge the battery before recording
Turn off the camcorder and attach the battery pack.
Access lamp
Blinks: Accessing files
Do not remove the
AC adapter, the
battery pack or the
SD card when
the lamp is blinking
Battery Pack
The battery pack
is not charged
at the time of
purchase.
CAUTION
Be sure to use JVC battery packs. If you use any other battery packs besides
JVC battery packs, safety and performance can not be guaranteed.
.
Power/charge lamp
Blinks: Charging
goes out: Charging finished
Open the cover
AC Adapter
To AC Outlet
(110V to 240V)
Grip Adjustment
Adjust the strap and fasten.
• Do not pull the strap when you open the
fasten. Please use the tab to open it.
• Fasten the strap when you grip the
camcorder.
• When carrying the camcorder, please be
careful not to drop it.
Grip strap
C
D
Ta b
Fasten
EN4
Date/Time Setting
Open the LCD monitor to
turn on the camcorder
Q
Power Button
Select [CLOCK SETTING]
S
CLOCK ADJUST
CLOCK SETTING
AREA SETTING
SET FOR DAYLIGHT SAVING TIME
SET THE CITY, DATE AND TIME
SET
Select the city closest to
the area where you use
T
the camcorder
QUIT
LCD monitor
Select [YES] within
10 seconds
R
Slide your finger up and down on
the sensor. Then touch OK.
SET DATE/TIME!
YES
NO
SET
When the message disappears, press the
•
power button for at least 2 seconds to turn
off the power, and then press it again for at
least 2 seconds.
Touch the sensors with your finger. The
•
sensors do not function if you touch them
with your finger nail or with gloves on.
AREA SETTING
SET
Select [ON] if daylight
U
saving time is effective.
SET FOR DAYLIGHT SAVING TIME
DAYLIGHT SAVING TIME (DST)
SET DAYLIGHT SAVING TIME
SET
R
Set the date and time
V
Touch sensor: Sets the date and time
}: Moves the cursor to the right
OK: Clock starts
CLOCK SETTING
DATE TIME
NOV 1 2009 4 55 PM
SAVE
NOV.1.2009 04:55PM
OFF
NOV.1.2009 04:55PM
GMT+ 9:00
QUIT
QUIT
QUIT
EN5
Video recording
CAUTION
Before recording an important scene, it is recommended to conduct a trial
recording.
Slide the mode switch to select ! (video) mode
Q
S elect recording mode
R
PLAY/REC
EN6
The mode changes
when you press the
button.
Start recording
S
Press the START/
STOP button to start
recording, and press
it again to stop.
The auto recording
indicator appears.
[]
4 h 59 m
0 : 04 : 01
M
Remaining space on built-in
memory or SD card
Video
Quality
C
D
0 : 04 : 01
Recordstandby
[ ]
4 h 59 m
REC
Recording
Playing back
Select playback mode
Q
PLAY/REC
The mode changes when
you press the button.
Select the desired fi le
R
Index screen
VIDEO PLAYBACK
1/2
LASER TOUCH OPERATION
Select F(Touch OK)
S
To perform operations such as forward search or reverse search ( pg. 22)
L
To view files on TV ( pg. 25)
L
It is recommended to copy your important recorded data to a DVD or other recording media
for storage. JVC will not be responsible for any lost data.
CAUTION
Don’t forget to make copies after recording!
To copy files onto DVD discs ( pg. 27)
•
To dub files using a VCR/DVD recorder ( pg. 34)
•
To play back a created DVD disc ( pg. 28)
•
To edit files on your computer ( pg. 29)
•
Playback screen
LASER TOUCH OPERATION
DIGEST
NOV.01.2009 04:55PM
EN7
Contents
GETTING STARTED
Index ...................................................... 10
Accessories .......................................... 12
Attaching the core filter ................................12
Preparing the Remote Control .....................12
Indications on LCD Monitor ................. 13
Necessary Settings before Use ........... 15
Charging the Battery Pack ........................... 15
Other Settings ....................................... 16
Date/Time Setting ........................................16
Language Setting ........................................17
Tripod Mounting ........................................... 17
Using an SD Card ........................................ 18
RECORDING/PLAYBACK
Recording Files ..................................... 19
Video Recording .......................................... 19
Still Image Recording ..................................20
Zooming ....................................................... 21
LED Light .....................................................21
Checking the Remaining Battery Power ......21
Checking the Remaining Space on the
recording medium ......................................21
Playing Back Files ................................ 22
Video Playback ............................................22
Still Image Playback ....................................23
Manual Recording ............................... 24
Change to Manual Recording Mode ............24
Backlight Compensation ..............................24
Manual Setting Menu ................................... 24
USING WITH TV
Viewing Files on TV .............................. 25
Connection with TV......................................25
Playback Operation .....................................25
EDITING
Managing Files ...................................... 26
Capture a Still Image from a Video .............. 26
Deleting Files ...............................................26
COPYING
Copying Files ........................................ 27
Using a DVD Burner ....................................27
Creating a DVD using a PC .........................29
Dubbing Files to a VCR/DVD Recorder .......34
Using with a Portable Media Player .... 35
Turning on the Export Mode ........................35
Changing the Export Setting .......................35
Transfering the Files to PC ..........................35
Uploading Files to Websites ................ 36
Turning on the Upload Mode .......................36
Uploading Files ............................................36
FURTHER INFORMATION
Changing the Menu Settings ............... 37
Troubleshooting .................................... 37
Warning Indications ............................. 39
Specifications ....................................... 40
Cautions ................................................ 42
Terms ..................................................... 44
EN8
How to use the Touch
Sensor
After the menu is displayed on the LCD monitor:
VIDEO
MANUAL SETTING
LIGHT
REGISTER EVENT
VIDEO QUALITY
USE DETAIL SETTINGS BAS ED
SET
Q Slide your finger up and down on the sensor.
R Select [SET]. (Touch OK.)
A
B
A
To select an on-screen button appearing on
the left side, touch the portion of the sensor
next to the on-screen button.
B
To select an on-screen button appearing at
the bottom of the screen, touch the buttons
underneath them.
Read these INSTRUCTIONS
to enjoy your CAMCORDER.
For more details on the
operations, refer to the
GUIDEBOOK in the supplied
CD-ROM.
In order to view the
GUIDEBOOK, Adobe
®
Reader® must be installed.
Adobe
®
Reader® can be loaded from Adobe’s
Adobe
web site:
http://www.adobe.com/
NOTE
Select your desired language with a single
click.
The model name is indicated on the bottom of your
camcorder.
®
Acrobat® ReaderTM or
QUIT
Read This First!
Make a backup of important recorded data
It is recommended to copy your important
recorded data to a DVD or other recording media
for storage. JVC will not be responsible for any
lost data.
Make a trial recording
Before the actual recording of important data,
make a trial recording and play back the recorded
data to check that the video and sound have been
recorded correctly. We recommend you to use the
same recording media when performing both the
trial recording and the actual recording.
Reset the camcorder if it does not operate
correctly
Close the LCD monitor and remove the power
supply (battery pack or AC adapter) from the
camcorder, then reattach it.
Precautions on handling batteries
Be sure to use the JVC BN-VF808U/VF815U/
•
VF823U battery packs. This product includes
patented and other proprietary technology and
is made to be used with the JVC battery and
not with other batteries. JVC cannot guarantee
safety or performance of this product when it is
operated by other batteries.
If the camcorder is subjected to electrostatic
•
discharge, turn off the power before using it
again.
If a malfunction occurs, stop using the
camcorder immediately and contact www.jvc.
com or by phone at 1-800-252-5722
Recorded data may be erased while the
camcorder is being repaired or inspected. Back up
all data before requesting repairs or inspections.
Because camcorder may be used for
demonstration in a shop, the demonstration
mode is set to on by default
To deactivate the demonstration mode, set [DEMO
MODE] to [OFF].
When Using an SD Card
Operations are confirmed on the following SD
•
cards. Class 4 or higher compatible SD or SDHC
card Panasonic, TOSHIBA, SanDisk, ATP SD
card (256 MB to 2 GB) or SDHC card (4 GB to
32 GB)
If other media are used, they may fail to record
•
data correctly, or they may lose data that had
already been recorded.
MultiMediaCards are not supported.
•
STARTED
GETTING
RECORDING/
PLAYBACK
USING WITH
TV EDITING COPYING
INFORMATION
FURTHER
EN9
GETTING STARTED
Index
C
D
EN10
NOTE
The LCD monitor can rotate 270°.
•
Be careful not to cover 4, 5, 7 and 8
•
during shooting.
Camcorder
! Touch Sensor
# OK Button
$ MENU Button
% Power (1) Button
& SD Card Slot ( pg. 18)
( EXPORT Button
) AV Connector
* UPLOAD Button ( pg. 36)
+ PLAY/REC Button ( pg. 19, 20, 22, 23)
, Mode Switch [!, #]
- DIRECT DVD Button ( pg. 28)
INFO Button ( pg. 21)
. START/STOP Button ( pg. 19)
/ SNAPSHOT Button ( pg. 20)
0Zoom Lever [W 7, T] ( pg. 21)
Speaker Volume Control
1 Speaker
2 DC Connector
3 USB Connector ( pg. 27, 30)
4 Camera Sensor
5 LED Light ( pg. 21)
6 Lens Cover
7 Lens
8Stereo Microphone
9Stud Hole
: Tripod Mounting Socket ( pg. 17)
; Battery Release Button [BATT.] ( pg. 15)
Remote Control
Q Infrared Beam Transmitting Window
R ZOOM (T/W) Buttons (Zoom in/out)
S Up Button
T Skip Backward Button
U Left Button
V Back Button
W PLAYLIST Button
X START/STOP Button
Y S. SHOT (SNAPSHOT) Button
Z INFO Button
a Skip Forward Button
b PLAY/PAUSE/SET Button
c Right Button
d Next Button
e Down Button
f INDEX Button*
g DISP Button
* Each time you press INDEX, the screen
switches as shown below:
!mode:
Index Screen « Group Index Screen
#mode:
Index Screen «Date Index Screen
STARTED
GETTING
EN11
Accessories
or
AC Adapter
AP-V20U/AP-V14U*
Battery Pack
BN-VF808U
Audio/Video
Cable
Remote Control
RM-V751U
USB Cable CD-ROM Core Filter (x2)
NOTE
Make sure to use the provided cables for connections. Do not use any other cables.
* AP-V14U is not mentioned in the GUIDEBOOK in the supplied CD-ROM.
Lithium Battery
CR2025
Pre-installed in the
remote control unit.
Attaching the Core Filter
The core filter reduces interference caused when connecting to other devices.
Release the stopper.
To be connected
to the camcorder
3 cm (1-3/16")
USB Cable: Wind once
AC Adapter: Wind twice
Preparing the Remote Control
A battery is included inside the remote control at the time of purchase.
Remove the insulation sheet before use.
Beam Effective Area
Remote Sensor
Effective distance:
NOTE
The transmitted beam may not be effective
or may cause incorrect operation when the
remote sensor is directly exposed to sunlight
or powerful lighting.
EN12
5 m (16 ft)
To Reinsert the Battery
Pull out the battery holder by pressing the
lock tab.
Lock Tab
Lithium Battery
(CR2025)
Indications on LCD Monitor
During both Video and Still Image Recording
1/4000
0
WT
LCD
NOV. 1. 2009 SD4:55 PM
! Selected Operation Mode Indicator
( pg. 24)
4
: Auto Mode
3
: Manual Mode
# Effect Mode Indicator
$ Tele Macro Mode Indicator
% LED Light Indicator ( pg. 21)
& Scene Select Mode Indicator
(Quick Review Indicator ( pg.19, 20)
) Zoom Indicator ( pg. 21)
* Recording Medium Indicator
SD
: SD Card
: Built-in memory
+ White Balance Indicator
, Monitor Backlight Indicator
- Battery Indicator
. Date/Time ( pg. 16)
/ Manual Focus Adjustment Indicator
0 Backlight Compensation Indicator
( pg. 24)
1 Brightness Control Indicator
. : Photometry Area Control Indicator
2 Shutter Speed
During Video Recording Only
LIB.
[4h59m]
0:04:01
PHOTO
REC
! Mode Indicator
# EXPORT Mode Indicator ( pg. 35)
$ Counter
% Upload Mode Indicator ( pg. 36)
& Video Quality:
(ULTRA FINE), C (FINE),
B
(NORMAL), E (ECONOMY)
D
( Remaining Time
)
REC: (Appears during recording.)
M
: (Appears during record-standby mode.)
MQ
* Digital Image Stabilizer (DIS) Indicator
(Appears when [DIS] is set to [OFF].)
+
Auto switch record media
, Shooting Indicator ( pg. 19)
- Wind Cut Indicator
. Event Indicator
During Still Image Recording Only
[9999]
FINE
10
PHOTO
STARTED
GETTING
! Mode Indicator
# Focus Indicator ( pg. 20)
$ Image Quality: FINE (fine) or STD
(standard)
% Remaining Number of Shots
& Shooting Indicator ( pg. 20)
( Shutter Mode Indicator
) Self-Timer Indicator
EN13
Indications on LCD Monitor (Continued)
During Video Playback
1: 55 : 01
+4
SD
8
NOV. 1. 2009 4:55 PM
! Mode Indicator
# Playlist Playback Indicator (Appears when
playing back a playlist.)
$ Video Quality:
(ULTRA FINE), C (FINE),
B
(NORMAL), E (ECONOMY)
D
% Counter
& Playback Mode
:Playback
F
:Pause
Q
:Forward Search
K
:Reverse Search
J
:Forward Slow-Motion
G
:Reverse Slow-Motion
E
(The number on the left shows speed.)
( Battery Indicator
) Date/Time ( pg. 16)
* Volume Level Indicator
During Still Image Playback
101- 0098
SD
NOV. 1. 2009 4:55 PM
! Mode Indicator
# older/File Number
$ Slide Show Playback Indicator
% Battery Indicator
& Date/Time ( pg. 16)
EN14
Necessary Settings before Use
To check the remaining battery power
Charging the Battery Pack
1
Close the LCD monitor to turn off the
camcorder.
2
Attach the battery pack, then
connect the AC adapter.
• With the “vv” (arrow) on the battery pack
pointing at the correct direction, slide the
battery pack until it locks in place.
DC Jack
L
See page 21.
Required charging/recording time
L
(approx.)
*When the LED light is off and the monitor
backlight is set to [STANDARD] mode.
Battery pack Charging time
BN-VF808U
(Provided)
BN-VF815U 2 hr. 40 min. 5 hr. 25 min.*
BN-VF823U 3 hr. 40 min. 8 hr. 10 min.*
To detach the battery pack
L
Recording time
1 hr. 50 min. 2 hr. 45 min.*
STARTED
GETTING
v v Arrow
The power/charge lamp blinks to indicate
•
charging has started.
When the lamp goes out, charging is
•
finished.
DC
AC Adapter
To AC Outlet
(110V to 240V)
BATT.
NOTE
You can also use the camcorder with just
•
the AC adapter.
The actual recording time may shorten
•
depending on the recording environment,
such as when recording scenes with fast
moving subject.
Please do not pull or bend the AC adapter
•
plug and cable. This may damage the AC
adapter.
EN15
>
>
Other Settings
Date/Time Setting
1
2
3
4
5
6
Selected area is highlighted
Principal city of
the selected area
Time difference to
GMT
7
EN16
Open the LCD monitor to turn on the
camcorder.
Touch MENU.
Select [DISPLAY SETTINGS].
VIDEO
WIND CUT
AUTO SWITCH REC MEDIA
DISPLAY SETTINGS
BASIC SETTINGS
CONFIGURE ON-SCREEN DISPLAY
SET
>
QUIT
Select [CLOCK ADJUST].
DISPLAY SETTINGS
LANGUAGE
CLOCK ADJUST
DATE DISPLAY STYLE
MONITOR BRIGHT
SET DATE AND TIME
SET
QUIT
Select [CLOCK SETTING].
CLOCK ADJUST
CLOCK SETTING
AREA SETTING
SET FOR DAYLIGHT SAVING TIME
SET THE CITY, DATE AND TIME
SET
QUIT
Select the city closest to the area
where you use the camcorder.
AREA SETTING
NOV.1.2009 04:55PM
SET
QUIT
Select [ON] if daylight saving time is
effective.
[ON]: Clock is advanced one hour from
the normal time which you set.
[OFF]: Deactivates the function.
SET FOR DAYLIGHT SAVING TIME
DAYLIGHT SAVING TIME (DST)
OFF
NOV.1.2009 04:55PM
SET DAYLIGHT SAVING TIME
SET
8
Set the date and time.
Select the item by using the touch sensor
and select [}] to set.
CLOCK SETTING
DATE TIME
9
Select [SAVE].
NOV 1 2009 4 55 PM
SAVE
GMT+ 9:00
To reset the setting, select [QUIT]
Setting the clock to local time
when traveling
After performing steps 1-4
5
Select [AREA SETTING].
CLOCK ADJUST
CLOCK SETTING
AREA SETTING
SET FOR DAYLIGHT SAVING TIME
SET WHEN IN ANOTHER COUNTRY
SET
6
Select the city closest to the area
you are traveling.
AREA SETTING
NOV.1.2009 04:55PM
SET
To return to the previous screen
L
Select
To quit the screen
L
Select [QUIT].
@
.
QUIT
QUIT
QUIT
QUIT
Language Setting
>
>
The language on the display can be changed.
1
Open the LCD monitor to turn on the
camcorder.
2
Touch MENU.
3
Select [DISPLAY SETTINGS].
VIDEO
WIND CUT
AUTO SWITCH REC MEDIA
DISPLAY SETTINGS
BASIC SETTINGS
CONFIGURE ON-SCREEN DISPLAY
SET
4
Select [LANGUAGE].
DISPLAY SETTINGS
LANGUAGE
CLOCK ADJUST
DATE DISPLAY STYLE
MONITOR BRIGHT
ON-SCREEN DISPLAY LANGUAGE
SET
5
Select the desired language.
To return to the previous screen
L
Select
To quit the screen
L
Select [QUIT]
@
.
>
QUIT
QUIT
Tripod Mounting
Align the camcorder stud hole with the tripod
stud, and the mounting socket with the screw,
and then rotate the camcorder clockwise to
mount it to the tripod.
Bottom of the
Camcorder
NOTE
Do not use a tripod on unsteady or unlevel
surfaces. It could tip over, causing serious
damage to the camcorder.
STARTED
GETTING
EN17
E
L
A ON
M
A
GE
F
ATBUILT-IN MEM
.
F
A
T SD CARD
Other Settings (Continued)
NOTE
Using an SD Card
If you want to record to an SD card, the
following operations need to be performed.
Operations are confirmed on the following
•
SD cards: Class 4 or higher compatible
SD or SDHC card Panasonic, TOSHIBA,
SanDisk, ATP SD card (256 MB to 2 GB) or
SDHC card (4 GB to 32 GB).
If other media are used, they may fail to
•
record data correctly, or they may lose data
that had already been recorded.
MultiMediaCards are not supported.
•
Cards used to record video on this
•
camcorder cannot be played back on other
devices.
Some card readers (including internal card
•
readers in PCs) may not be able to support
SDHC format. If you use an SDHC card for
recording and encounter any reading error,
the card reader you are using might be a
non-SDHC supported device. Please use
the camcorder or other SDHC compatible
devices to access the card.
Insert and remove the SD card only while
•
the power is turned off. Otherwise, data on
the card may be corrupted.
Do not touch the terminal on the reverse
•
side of the label.
R Change the recording medium
The camcorder is programmed to record on
the BUILT-IN MEMORY flash when it is
shipped from the factory. You can change the
recording medium to SD card.
Set [REC MEDIA FOR VIDEO] to [SD
CARD) and [REC MEDIA FOR IMAGE]
to [SD].
MEDIA SETTINGS
REC MEDIA FORVIDEO
REC MEDIA FOR I
BUILT-IN MEMORY
ORM
SD CARD
ORM
RASE AL
SET
QUIT
Q Insert an SD card
Preparation:
Press Power (1) button to turn off the
camcorder.
1
Open the SD card cover.
2
Firmly insert the card with its clipped
edge first.
3
Close the SD card cover.
To remove an SD card
L
Push the SD card once.
After the card comes out a little, pull it out.
EN18
Clipped Edge
S Format an SD card when using it for
the first time
Select [FORMAT SD CARD] to format
the card.
MEDIA SETTINGS
REC MEDIA FOR VIDEO
REC MEDIA FOR IMAGE
FORMAT BUILT-IN MEM.
FORMAT SD CARD
ERASE ALL DATA ON
SET
QUIT
It is recommended to copy your important
recorded data to a DVD or other recording
media for storage. JVC will not be
responsible for any lost data.
RECORDING/PLAYBACK
Recording Files
Video Recording
Slide the mode switch to select
! (video) mode.
SNAPSHOT
L To stop recording
Press the START/STOP again.
L To view the last recorded scene
Select
A while recording is paused.
Selecting
scene.
$ during playback deletes that
LTo record a still image during video
recording
Press SNAPSHOT.
Press the PLAY/REC button to
select recording mode.
PLAY/REC
[4 h 59 m]
0:00:00
Press the START/STOP button to
start recording.
[4 h 59 m]
0:00:01 REC
Approximate remaining time
You can also start/stop recording by
selecting [REC] on the LCD monitor.
(On-screen recording control).
for recording appears.
L To change the picture quality
Change the settings in [VIDEO QUALITY].
L To change the aspect ratio of the image
(16:9/4:3)
Change the settings in [SELECT ASPECT
RATIO].
RECORDING/
PLAYBACK
NOTE
The video recording mode is automatically selected when you turn off the camcorder and then on
•
again.
If the camcorder is not operated for 5 minutes while the power is on, it turns itself off automatically to
•
conserve power.
After recording video for 12 consecutive hours, recording stops automatically.
•
A new file will be created for every 4 GB of continuous shooting.
•
This camcorder records video in MPEG2 format compliant with SD-VIDEO format. This camcorder is
•
not compatible with other digital video formats.
EN19
Recording Files (Continued)
Still Image Recording
Slide the mode switch to select
# (still image) mode.
L To view the last recorded image
Select
A after shooting.
Selecting $ during playback deletes
that image.
L To change the picture quality
Change the settings in [IMAGE
QUALITY].
L To record still images continuously
Set to [CONTINUOUS SHOOTING] in
[SHUTTER MODE].
Press the PLAY/REC button to
select recording mode.
PLAY/REC
FINE [9999]
Press and hold the SNAPSHOT
button halfway.
FINE
The ? indicator becomes green when
the captured image is focused.
Press the SNAPSHOT button fully
to take the photo/picture.
FINE [9999]
PHOTO
NOTE
DIS (Digital Image Stabilizer) does not function during still image recording.
•
If the camcorder is not operated for 5 minutes while the power is on, it turns itself off automatically to
•
conserve power.
EN20
Zooming
Preparation:
Slide the mode switch to select ! or #
•
mode.
Press the PLAY/REC button to select
•
recording mode.
Zoom out Zoom in
W: Wide angle T: Telephoto
You can also zoom out/zoom in by selecting
[W] or [T] on the LCD monitor. (On-screen
zoom control).
Zoom Ratio (Factory-preset)
! mode # mode
[80X/DIGITAL] [35X/OPTICAL]
L To change the maximum zoom ratio (for
! mode only)
Change the settings in [ZOOM].
NOTE
Macro shooting is possible as close as
approx. 5 cm (2”) to the subject when the
zoom lever is set all the way to W.
LED Light
Preparation:
Slide the mode switch to select ! or #
•
mode.
Press the PLAY/REC button to select
•
recording mode.
1
Touch MENU.
2
Select [LIGHT].
3
Select the desired setting.
The LED light remains on regardless
ON
of the surrounding conditions.
The LED light turns on automatically
AUTO
when shooting in insufficient light
conditions.
Deactivates this function
OFF
Checking the Remaining Battery Power
Preparation:
Attach the battery pack.
•
Press the PLAY/REC button to select
•
recording mode.
For ! mode:
Press the INFO button three times or INFO
and then select ;.
For # mode:
Press INFO.
DIRECT
DVD
INFO
BATTERY CONDITION
100%
50%
0%
MAX TIME
min
QUIT
L To return to the normal screen
Select [QUIT] or press INFO.
NOTE
The recordable time display should only be used
as a guide. It is displayed in 10 minute units.
Checking the Remaining Space on the recording medium
Preparation:
Slide the mode switch to select ! mode.
•
Press the PLAY/REC button to select
•
recording mode.
Press the INFO button once (BUILT-IN
MEMORY) or twice (SD CARD).
DIRECT
DVD
INFO
MAX RECORDING TIME
BUILT-IN MEM
0h05m
0h07m
0h09m
0h26m
SET
QUIT
The maximum recording time is displayed for
each video quality mode.
L To change the picture quality
1) Select the video quality.
2) Select [SET].
L To Change the Recording Media
1) Press INFO to select Built-in Memory
or SD.
2) SELECT [SET].
L To quit the screen
Select [QUIT].
PLAYBACK
EN21
RECORDING/
Playing Back Files
Video Playback
Slide the mode switch to select
! (video) mode.
L To move to the previous or next page
Touch [
v] or [V] for over a second.
L To play back a few seconds from each
select scene of the recorded videos
Touch [
DIGEST].
L Operations during Video Playback
On-screen buttons
Press PLAY/REC to select the
playback mode.
PLAY/REC
The index screen appears.
VIDEO PLAYBACK
DIGEST
1/2
NOV.1.2009 04:55PM
Select the desired file.
L To delete a video
Select *when playback is stopped.
L To change the number of thumbnails
(6 thumbnails / 20 thumbnails)
Move the zoom lever to [T] or [W].
L Speaker volume
: Return to the first scene of the file
N
: Go to the first scene of the next file
O
: Return to the index screen
L
: Reverse search (during playback)
J
: Frame-by-frame playback in reverse
E
direction (during pause)*
: Playback
F
: Pause
Q
: Forward search (during playback)
K
: Frame-by-frame playback in forward
G
direction (during pause)*
* Slow playback starts when you keep
touching the sensor button under
for a while.
EN22
—:Turn down the volume
+ :Turn up the volume
E / G
Still Image Playback
Slide the mode switch to
select # (still image) mode.
L To move to the previous or next page
Touch [
v] or [V] for over a second.
L To delete a still image
Select $.
L To change the number of thumbnails
(6 thumbnails/20 thumbnails)
Move the zoom lever to [T] or [W].
Press PLAY/REC to select the
playback mode.
IMAGE PLAYBACK
PLAY/REC
NOV.01.2009 04:55PM
The index screen appears.
Select the desired file.
1/2
RECORDING/
PLAYBACK
L Operations during Still Image Playback On-screen buttons
: Change playback order of slide show in reverse direction
P
: Change playback order of slide show in forward direction
F
: Return to the index screen
L
: Display the previous file
N
: Start the slide show
F
: End the slide show
Q
: Display the next file
O
EN23
Manual Recording
Manual recording mode enables you to set
the focus and screen brightness etc. manually.
Change to Manual Recording Mode
Preparation:
Slide the mode switch to select ! or #
•
mode.
Press the PLAY/REC button to select
•
recording mode.
Select [A/M] twice.
[4 h 59 m]
/
L To return to the auto recording mode
Select [A/M] so that the
appears.
Backlight Compensation
Backlight compensation brightens the subject
by increasing the exposure.
In the manual recording mode;
Select -.
4 indicator
RECREC
/
L To cancel backlight compensation
Select - again.
NOTE
If the LCD monitor is turned upside down, is not displayed. Change the setting when the
LCD monitor is in the normal position.
Manual Setting Menu
In the manual recording mode:
1
Touch MENU.
2
Select [MANUAL SETTING].
VIDEO
MANUAL SETTING
LIGHT
REGISTER EVENT
VIDEO QUALITY
USE DETAIL SETTINGS BASED
SET
3
Select the desired menu.
VIDEO
SCENE SELECT
FOCUS
ADJUST BRIGHTNESS
SHUTTER SPEED
THE BRIGHTNESS OF THE
SET
4
Select the desired setting.
VIDEO
AUTO
MANUAL
SET
Depending on the kind of settings you
select, you can set the value by using the
touch sensor.
L To return to the previous screen
Select
@.
L To quit the screen
Select [QUIT].
QUIT
QUIT
QUIT
EN24
Viewing Files on TV
This camcorder is designed to be used
with NTSC-type color television signals. It
cannot be used with a television of a different
standard.
Connection with TV
L To connect using the AV connector.
Preparation:
Turn off all units.
DC
Connector
AV Cable
To AC
Outlet
AC Adapter
AV
Connector
AV Input Connector
Playback Operation
After the connection with TV is completed
1 Turn on the camcorder and the TV.
2 Set the TV to its VIDEO mode.
3 (Only when connecting the camcorder to
the VCR/DVD recorder)
Turn on the VCR/DVD recorder, and
set the VCR/DVD recorder to its AUX
input mode.
4 Start playback on the camcorder.
( p. 22, 23)
USING WITH
TV
EN25
EDITING/PRINTING
Managing Files
CAUTION
Do not remove the recording medium or
perform any other operation (such as turning
off the power) while accessing files. Also,
be sure to use the provided AC adapter, as
the data on the recording medium may be
corrupted if the battery becomes exhausted
during operation. If the data on the recording
medium becomes corrupted, format the
recording medium to use the medium again.
Capture a Still Image from a Video
You can capture the desired scene from a
recorded video, and store it as a still image.
Preparation:
• Slide the mode switch to select
! mode.
• Press the PLAY/REC button to select
playback mode.
Press SNAPSHOT when playback is
paused.
SNAPSHOT
NOTE
• Captured still images are stored at a
resolution of 640 x 360 (if the video was
recorded in 16:9) or 640 x 480 (if the video
was recorded in 4:3). The image can be
elongated in the horizontal or vertical
directions depending on the quality of the
source video file.
• The continuous shooting function cannot be
used to capture images.
• You cannot capture video during playback.
Deleting Files
Protected files cannot be deleted. To delete
•
them, release the protection first.
Once files are deleted, they cannot be
•
restored. Check files before deleting.
Preparation:
Slide the mode switch to select ! or #
•
mode.
Press the PLAY/REC button to select
•
playback mode.
Touch MENU.
1
Select [DELETE]
2
VIDEO
DELETE
UPLOAD SETTINGS
SEARCH
PLAYBACK PLAYLIST
Select [CURRENT].
3
Select [YES].
4
DELETE RECORDED VIDEO
SET
VIDEO
CURRENT
FILE SELECT
DELETE ALL
DELETE ONE SCENE AT A TIME
SET
(REMAINING SCENES:0009)
SET
DELETE
DELETE?
YES
NO
QUIT
QUIT
QUIT
You can select the previous or next file by
selecting
{
or }.
L To quit the screen
Select [QUIT].
EN26
COPYING
Copying Files
It is recommended to copy your important
recorded data to a DVD or other recording
media for storage. JVC will not be
responsible for any lost data.
Types of Copying and Connectable Device
DVD Burner
(CU-VD3/CU-VD50)
You can copy video files
recorded on this camcorder
onto DVD discs.
PC
You can copy video/
still image files on this
camcorder onto your PC.
VCR/DVD Recorder
You can dub video files
recorded on this camcorder
onto DVD discs.
NOTE
It is recommended to use the JVC DVD
burner (CU-VD50/CU-VD3). When using
CU-VD20 or CU-VD40, the recording time
may take approx. 2 times longer than the time
that is described in the instruction manual of
DVD burner.
Using a DVD Burner
Supported discs: 12cm DVD-R, DVD-RW
Regarding DVD-R discs, only unused DVD-R
•
discs can be used. Regarding DVD-RW
discs, used DVD-RW discs can also be
used, but they need to be formatted before
recording. Formatting a disc deletes all
content recorded on the disc up until that
time.
Dual-layer discs cannot be used.
•
Regarding finalization after copying
The disc is automatically finalized so that
it can be played on other devices. After
finalizing, the disc is a play-only disc, so no
more files can be added.
Connection with a DVD Burner
Preparation:
Turn on the camcorder first, then turn on the
DVD burner.
DC
Connector
C
D
To AC
Outlet
AC Adapter
DVD Burner
USB Connector
NOTE
Refer also to the optional DVD burner’s
•
instruction manual.
Use the USB cable that came with the DVD
*
burner.
USB
Connector
USB
Cable*
COPYING
EN27
Loading...