Jvc GZ-HM970, GZ-HM965, GZ-HM870, GZ-HM860, GZ-HM855 User Manual
CAMCORDER
Detailed User Guide
GZ-HM970/GZ-HM965/
GZ-HM870/GZ-HM860/
GZ-HM855
LYT2339-022A
Table of Contents
Beginner's Guide ............................................................ 5
Charging .................................................................................. 5
Recording ................................................................................ 5
Playback .................................................................................. 5
Shooting Tips ........................................................................... 5
Holiday Season/Christmas ...................................................... 6
Wedding .................................................................................. 7
Travel ....................................................................................... 8
Amusement Park ................................................................... 10
Getting Started
Precautions on Playing Back 3D Images (for GZ-HM970/GZ-
HM965) .............................................................................. 12
Verifying the Accessories ...................................................... 13
Attaching the Core Filter ..................................................... 14
Charging the Battery Pack ..................................................... 15
Grip Adjustment ..................................................................... 16
Inserting an SD Card ............................................................. 16
Types of Usable SD Card ................................................... 17
Using an Eye-Fi Card ......................................................... 18
Using the Touch Screen ........................................................ 18
Names of Buttons and Functions on the LCD Monitor ....... 19
Clock Setting ......................................................................... 20
Resetting the Clock ............................................................ 21
Changing the Display Language ............................................ 22
Holding this Unit .................................................................... 22
Tripod Mounting .................................................................... 22
Using the Remote Control ...................................................... 23
Using Bluetooth-compliant Devices (for GZ-HM970/GZ-HM870/
GZ-HM860) ........................................................................ 24
Registering a Bluetooth-compliant Device ......................... 25
Connecting to a Registered Bluetooth-compliant Device
........................................................................................ 27
Changing the Settings of a Registered Bluetooth-compliant
Device ............................................................................ 28
Transferring Still Images to a Bluetooth-compliant Device
........................................................................................ 29
Operation Using a Smartphone .......................................... 30
Bluetooth Application for Smartphones .............................. 31
Radio Waves Used by this Product .................................... 38
Using this Unit Overseas ....................................................... 39
Charging the Battery Pack Overseas ................................. 39
Setting the Clock to Local Time when Traveling ................. 39
Setting Daylight Saving Time ............................................. 40
Optional Accessories ............................................................. 40
Recording
Taking Videos in Intelligent Auto Mode .................................. 43
Zooming ............................................................................. 46
Capturing Still Images During Video Recording ................. 46
Taking Still Images in Intelligent Auto Mode .......................... 46
Zooming ............................................................................. 49
Manual Recording ................................................................. 50
Scene Selection ................................................................. 51
Adjusting Focus Manually .................................................. 52
Using Focus Assist ............................................................. 53
Adjusting Brightness .......................................................... 53
Setting Shutter Speed ........................................................ 54
Setting Aperture ................................................................. 54
Setting White Balance ........................................................ 55
Setting Backlight Compensation ........................................ 56
Taking Close-up Shots ....................................................... 57
Creating Animation Effects (ANIMATION EFFECT) .............. 57
Registering Human Face Personal Authentication Information
............................................................................................ 59
Setting SMILE%/NAME DISPLAY ...................................... 61
Editing the Registered Face Information ............................ 62
Capturing Subjects Clearly (TOUCH PRIORITY AE/AF) ....... 64
Capturing Smiles Automatically (SMILE SHOT)
Recording while Displaying a Magnified View of a Selected Face
(FACE SUB-WINDOW) ...................................................... 67
Reducing Camera Shake ....................................................... 68
Taking Videos in iTunes Format ............................................ 69
Slow-motion (High-speed) Recording .................................... 70
Recording at Intervals (TIME-LAPSE RECORDING) ............. 71
Recording Automatically by Sensing Movements (AUTO REC)
............................................................................................ 73
Taking Group Shots (Self-timer) ............................................ 74
Setting the USER Button ....................................................... 75
Remaining Recording Time/Battery Power ............................ 76
.................... 65
Playback
Playing Back Videos .............................................................. 78
Playing Back 3D Images (for GZ-HM970/GZ-HM965)
........................................................................................ 80
Playing a Video with Defective Management Information
........................................................................................ 80
Playing Back Still Images ....................................................... 81
Playing Back 3D Images (for GZ-HM970/GZ-HM965)
........................................................................................ 82
Slideshow Playback ........................................................... 82
Searching for a Specific Video/Still Image ............................. 83
Date Search ....................................................................... 83
Connecting to and Viewing on TV .......................................... 83
Playing Back 3D Images (for GZ-HM970/GZ-HM965)
........................................................................................ 84
Playing Back 2D Images (for GZ-HM970/GZ-HM965/GZ-
HM870/GZ-HM860/GZ-HM855) ..................................... 86
Playing Back a DVD or Blu-ray Disc Created on this Unit
............................................................................................ 88
Editing
Deleting Unwanted Files ........................................................ 89
Deleting the Currently Displayed File ................................. 89
Deleting Selected Files ...................................................... 89
Protecting Files ...................................................................... 90
Protecting/Releasing Protection of the Currently Displayed File
........................................................................................ 90
Protecting/Releasing Protection of Selected Files .............. 90
Capturing a Still Image in the Video during Playback ............. 92
Combining Videos Recorded by Seamless Recording .......... 92
Capturing a Required Part in the Video (TRIMMING) ............ 93
Capturing Videos for Uploading to YouTube .......................... 94
Preparing Videos to Transfer to iTunes .................................. 95
Copying
Creating Discs with a DVD Writer .......................................... 96
Preparing a DVD Writer (CU-VD3) ..................................... 97
Preparing a DVD Writer (CU-VD50) ................................... 98
Creating a Disc ................................................................... 98
Playing Back with a DVD Writer ....................................... 103
Finalizing Discs After Copying .......................................... 103
Creating Discs with an External Blu-ray Drive ...................... 104
Preparing an External Blu-ray Drive ................................. 104
Creating a Disc ................................................................. 105
Playing Back with an External Blu-ray Drive ..................... 108
Creating a Disc Using a Connected Blu-ray Recorder ......... 109
Dubbing Files to a Disc by Connecting to a DVD Recorder
.......................................................................................... 109
Dubbing Files to a VHS Tape by Connecting to a VCR ........ 110
Using a USB External Hard Disk Drive ................................ 110
Preparing a USB External Hard Disk Drive ....................... 111
Copying All Files .............................................................. 111
Playing Back Files in the USB External Hard Disk Drive
...................................................................................... 112
Deleting Folders in the USB External Hard Disk Drive ..... 113
Formatting the USB External Hard Disk Drive .................. 113
Importing Files from the USB External Hard Disk Drive
...................................................................................... 114
2
Copying Files to an SD Card ................................................ 115
Moving Files to an SD Card ................................................. 116
Copying to Windows PC ...................................................... 117
Verifying System Requirements (Guideline) ..................... 117
Installing the Provided Software (Built-in) ......................... 118
Backing Up All Files ......................................................... 119
Organizing Files ............................................................... 120
Recording Videos to Discs ............................................... 121
Backing Up Files Without Using Provided Software ......... 122
List of Files and Folders ................................................... 123
Copying to Mac Computer ................................................... 124
Menu Settings
Operating the Menu ............................................................. 125
Operating the Main Menu ................................................. 125
Operating the Common Menu .......................................... 125
Operating the Face Short Cut Menu ................................. 126
Main Menu for Video Recording .......................................... 127
SCENE SELECT .............................................................. 129
FOCUS ............................................................................ 129
FOCUS ASSIST ............................................................... 129
FOCUS ASSIST COLOR ................................................. 129
BRIGHTNESS ADJUST ................................................... 129
SHUTTER SPEED ........................................................... 129
APERTURE PRIORITY .................................................... 129
WHITE BALANCE ............................................................ 129
BACKLIGHT COMP. ........................................................ 129
TELE MACRO .................................................................. 129
TOUCH PRIORITY AE/AF ............................................... 129
LIGHT .............................................................................. 130
DIS ................................................................................... 130
GAIN UP .......................................................................... 130
WIND CUT ....................................................................... 131
EXPORT SHOOTING ...................................................... 131
ANIMATION EFFECT ...................................................... 131
HIGH SPEED RECORDING ............................................ 131
TIME-LAPSE RECORDING ............................................. 131
AUTO REC ...................................................................... 131
FACE SUB-WINDOW ...................................................... 131
SHUTTER MODE ............................................................ 132
CONT. SHOOTING SPEED ............................................. 132
SMILE SHOT ................................................................... 133
SMILE%/NAME DISPLAY ................................................ 133
FACE REGISTRATION .................................................... 133
VIDEO QUALITY .............................................................. 133
ZOOM .............................................................................. 134
SEAMLESS RECORDING ............................................... 134
x.v.Color ........................................................................... 135
ZOOM MIC ...................................................................... 135
USER BUTTON SETTING ............................................... 135
Main Menu for Still Image Recording ................................... 136
SCENE SELECT .............................................................. 138
FOCUS ............................................................................ 138
FOCUS ASSIST ............................................................... 138
FOCUS ASSIST COLOR ................................................. 138
BRIGHTNESS ADJUST ................................................... 138
SHUTTER SPEED ........................................................... 138
APERTURE PRIORITY .................................................... 138
WHITE BALANCE ............................................................ 138
BACKLIGHT COMP. ........................................................ 138
TELE MACRO .................................................................. 138
TOUCH PRIORITY AE/AF ............................................... 138
FLASH ............................................................................. 139
SELF-TIMER .................................................................... 139
GAIN ................................................................................ 139
AUTO REC ...................................................................... 140
SHUTTER MODE ............................................................ 140
CONT. SHOOTING SPEED ............................................. 140
SMILE SHOT ................................................................... 141
SMILE%/NAME DISPLAY ................................................ 141
FACE REGISTRATION .................................................... 141
IMAGE SIZE ..................................................................... 141
USER BUTTON SETTING ............................................... 141
Main Menu for Video Playback ............................................ 142
SEARCH DATE ................................................................ 143
PROTECT/CANCEL ........................................................ 143
COPY ............................................................................... 143
MOVE .............................................................................. 143
TRIMMING ....................................................................... 143
UPLOAD SETTINGS ....................................................... 143
EXPORT SETTINGS ........................................................ 143
PLAYBACK OTHER FILE ................................................ 143
SEAMLESS REC CTRL ................................................... 143
K2 TECHNOLOGY .......................................................... 143
Main Menu for Still Image Playback ..................................... 144
SEARCH DATE ................................................................ 145
SLIDE SHOW EFFECTS (for GZ-HM870/GZ-HM860/GZ-
HM855) ........................................................................ 145
PROTECT/CANCEL ........................................................ 145
COPY ............................................................................... 145
MOVE .............................................................................. 145
STILL IMAGE TRANSFER (for GZ-HM970/GZ-HM870/GZ-
HM860) ........................................................................ 145
Common Menu .................................................................... 146
CLOCK ADJUST .............................................................. 148
DATE DISPLAY STYLE ................................................... 148
LANGUAGE ..................................................................... 148
MONITOR BRIGHTNESS ................................................ 148
REC MEDIA FOR VIDEO ................................................. 149
REC MEDIA FOR IMAGE ................................................ 149
OPERATION SOUND ...................................................... 150
AUTO POWER OFF ......................................................... 150
QUICK RESTART ............................................................ 151
REMOTE .......................................................................... 151
DEMO MODE .................................................................. 152
3D LEVEL ADJUST (for GZ-HM970/GZ-HM965) ............ 152
TOUCH SCREEN ADJUST ............................................. 153
3D DISPLAY WARNING (for GZ-HM970/GZ-HM965)
...................................................................................... 154
DISPLAY ON TV .............................................................. 154
VIDEO OUTPUT .............................................................. 155
COMPONENT OUTPUT .................................................. 155
HDMI OUTPUT ................................................................ 156
HDMI CONTROL ............................................................. 157
Bluetooth (for GZ-HM970/GZ-HM870/GZ-HM860) .......... 157
AUTO FINALIZE .............................................................. 157
FACTORY PRESET ......................................................... 158
UPDATE .......................................................................... 158
PC SOFTWARE UPDATE ............................................... 158
FORMAT BUILT-IN MEM. ................................................ 158
FORMAT SD CARD ......................................................... 159
ERASE ALL DATA ........................................................... 159
Names of Parts
Front .................................................................................... 160
Rear ..................................................................................... 160
Bottom ................................................................................. 161
Interior ................................................................................. 161
LCD Monitor ........................................................................ 162
Indications on the LCD monitor
Common Recording Indications .......................................... 163
Video Recording .................................................................. 163
Still Image Recording ........................................................... 164
Video Playback .................................................................... 164
Still Image Playback ............................................................ 165
Troubleshooting
Battery Pack ........................................................................ 166
Recording ............................................................................ 166
Card ..................................................................................... 167
3
Playback .............................................................................. 167
Editing/Copying ................................................................... 168
Computer ............................................................................. 168
Screen/Image ...................................................................... 169
Other Problems ................................................................... 169
Error Message? ................................................................... 170
Maintenance
Specifications
4
Charging
Refer to the operating instructions found in the animation on the Detailed
0
User Guide.
Recording
Refer to the operating instructions found in the animation on the Detailed
0
User Guide.
Playback
Refer to the operating instructions found in the animation on the Detailed
0
User Guide.
Shooting Tips
Basic Way to Hold a Camcorder
~ Recording Stable Images ~
Beginner's Guide
[Getting Ready]
o
A Open your feet to the width of your shoulders.
B Extend your right hand and hold the camcorder over your head.
C Hold the LCD monitor with your left hand and adjust the angle
accordingly.
Caution :
Use this way of shooting only as a last resort as it is difficult to achieve
0
stable images.
Set to the wide angle as much as possible as the image will be prone to
0
camera shake.
Be considerate. Do not inconvenience the people around you.
0
Squatting and Shooting at Eye Level
This is the standard way of shooting while standing up.
Be sure to master this basic technique in order to achieve stable images.
[Getting Ready]
o
A Open your feet to the width of your shoulders.
B Keep the elbow of your right arm, which is holding the camcorder, close
to your side.
C Hold the LCD monitor with your left hand and adjust the angle
accordingly.
.
Extending Your Hands to Shoot
~ High-Angle Shooting ~
Staying low is a common position to take when shooting small children.
By recording from the eye level of the child, you can capture all his cute
expressions clearly.
[Getting Ready]
o
A Kneel down with your left knee while keeping your right foot on the
ground.
B Place the elbow of your right arm, which is holding the camcorder, on
your right knee.
C Hold the LCD monitor with your left hand and adjust the angle
accordingly.
.
Panning
Refer to the operating instructions found in the animation on the Detailed
0
User Guide.
Use this method to shoot a wide angle of view.
[Getting Ready]
o
A Shoot by rotating your body instead of moving your arms while keeping
the basic way of holding a camcorder as stated above.
B Stand facing the direction where the rotation will stop.
C Twist your upper body to the direction where recording will start.
D Press the start button and record for 2 seconds, then slowly twist back
your body to face the front.
Record for another 2 seconds while facing the front, then press the
stop button.
(The 90 degrees rotation should take about 5 seconds, giving the
feeling of a slow motion.)
Extend your hand when your subject is being hidden behind a crowd of
.
people.
5
Useful Shooting Techniques
Holiday Season/Christmas
Record the happy Christmas celebration with your family!
Photo by 101st CAB, Wings of Destiny
Creative Commons Attribution-No Derivative Works 3.0
Decorating the Tree and Preparing the Dinner
The decoration of tree and preparation of dinner are part of the joy of
Christmas. Be sure to record these happy family times!
Decorating the tree
o
.
Recording the Christmas Party
.
Photo by InnerSpirit
Creative Commons Attribution-No Derivative Works 3.0
After all preparations, it is finally the Christmas party itself.
Not only should you record the candle-blowing scene, but also the smiles of
the family while being surrounded by good food, or even the father who is
slightly drunk from champagne!
Finding the Presents
A tree is the most important thing to bring out the mood of Christmas.
.
Simply the scene of all family members engaging in the decorating of a fir
tree with various colorful ornaments is full of the feeling of happiness.
Preparing the Dinner
o
.
Photo by Manicosity
Creative Commons Attribution-No Derivative Works 3.0
Record the scenes as everyone helps to prepare the feast of the night.
You can film the mother who is cooking, the children who are helping, and
of course, the process of making a cake!
For children, the greatest joy of Christmas is receiving presents the next
.
morning.
Their expression of delight when finding a present next to their pillow is a
recording opportunity not to be missed. Get ready to shoot before the
children wake up!
6
Useful Shooting Techniques
Wedding
Create an awesome wedding video for the bride and groom!
.
Discussing and Planning Before the Event
Before the day of the wedding reception, it is important to discuss with the
bride and groom about various details such as the order of the ceremony
and whether there are any entertainment programs or change of clothes.
By understanding the preferences of the bride and groom, you will be able
to shoot more appropriately.
Finding out the route of entrance
o
The highlight of a wedding reception is the entrance of the bride and groom.
Find out which door they will enter from and the route they will take from the
person-in-charge of the wedding hall in advance. Set up the tripod at a place
where you can follow the couple using zoom without having to move around.
Number of times and timing of clothes-changing
o
Find out the timing of any changing of clothes so as to capture the scene well
when the bride and groom enter again.
You can also make use the time while the bride and groom are changing to
record comments of well wishes from the guests.
.
Recording the Expressions and Comments of Guests
Setting the shot from eye level to chest level
o
.
You can record comments from the guest by going around asking, "Please
say a few words for the bride and groom".
This can be done at the guests' waiting room, when the bride and groom are
changing, or during the entertainment programs.
Closing Up on the Bride's Face During the Thank You Speech
Touching highlight scene
o
The climax of the event finally comes during the bride and groom's thank you
speech and presentation of flowers. The touching words of appreciation from
the bride and tears of joy from the parents are scenes that must not be
missed.
Start by closing up on the bride's face using zoom. As the tears start to form
in the bride's eyes, continue shooting for a little longer. Then, slowly zoom
out to the wide angle to show the parents who are moved by the speech.
.
Finding the Right Angle to Capture Both Bride and Groom
Composing the picture with the groom in front and the
o
guests at the back
The main characters of a wedding are of course the bride and groom. Record
their expressions clearly during the toast, speech, entertainment programs,
and other scenes.
Another recommendation is to capture the face shots of the guests, then pan
towards the groom. Picture composition containing the crowd of guests only
lacks fun, so be sure to pay attention to the shooting angle and size.
.
7
Useful Shooting Techniques
Advanced Operation with Two Camcorders
If video-editing is to be done, record using two camcorders so that a video
with varying scenes can be created. You can try asking a close friend who
has a camcorder at home.
Set the borrowed camcorder on a tripod to focus on taking close-up shots
of the bride and groom. In this way, the other camcorder can be moved
around to record other scenes, enabling an interesting video with changing
scenes to be created through editing and compilation.
As most people own at least a digital camera nowadays, even if you are really
unable to find an extra camcorder, inserting still pictures to the video at
various points is also a good way to add variety. Do give it a try!
<Camcorder 1>
o
Closing up on the bride and groom all the time
.
<Camcorder 2>
o
Recording the congratulatory messages from friends at the
same time
.
Travel
Capture all the good times of your domestic or overseas trips!
.
Bringing the Necessary Equipment
The necessary things to bring on a trip depends on your traveling purpose
and the destination.
For overseas trips in particular, you have to think about what to bring in
accordance to the local conditions.
Here are some suggestions for your consideration.
Camcorder
o
Think about how many hours of shooting you will usually perform in a day.
Be sure to prepare enough recording medium especially for long overseas
trips.
If you are recording in SD cards, get ready the sufficient number of cards,
including some for backup.
Battery Pack
o
Prepare a battery pack that is ready for double the expected recording time
in a day. For example, if you plan to record for 2 hours a day, prepare a
battery pack that is ready for 4 hours (actual recording time).
For a day trip, you can prepare a battery with low capacity but for a long trip,
do prepare a few batteries with high capacities.
AC Adapter
o
The JVC AC adapter supports voltages from 100 V to 240 V, and hence can
be used anywhere in the world.
Bring along the adapter if you are traveling for a long time. Charge the battery
pack while sleeping so that you can record with full battery power the next
day.
Power Plug Adapter
o
The shape of the power plug varies according to countries. Be sure to check
the shape of the power plug beforehand, and bring the appropriate power
plug adapter.
“Charging the Battery Pack Overseas” (A p. 39)
.
8
Battery Charger
o
Useful Shooting Techniques
Using Pan at the Places of Interest
Tourists spots with beautiful scenery or historical sites are places that you
would certainly want to record.
To capture the magnificence of a scene which cannot be fitted into a single
frame, try the panning technique.
Refer to the "Shooting Tips" found in this website on how to use panning
effectively.
In addition, you may also like to take a shot of the signs or monuments that
can often be found at the tourist spots.
Recording cannot be performed when an AC adapter is connected to the
.
camcorder for battery charging.
You can bring an additional battery charger to charge battery packs if you
plan to use the camcorder for recording at night. You can also charge
multiple battery packs by using both the battery charger and this camcorder
at the same time.
Tripod
o
.
A tripod is an essential item to take stable images. Select an appropriate
tripod in accordance to your purpose and style of traveling, such as a
compact one to be used on a table or one that is at least 1 m tall.
Recording the Excitement Before Departure
It may be a little abrupt to start your travel video at the destination suddenly.
Record also the preparations prior to departure if it is a family trip, or the time
when everyone is gathered at the meeting place if you are traveling with your
friends.
For overseas trips, taking a shot of the signs and displays at the airport of
the flight you are taking may be useful for future reference.
.
.
Showing Everyone Having a Good Time
When taking a video, it is rather dull to shoot only the scenery or historical
sites.
Talk about your feelings while recording the breath-taking scenery of an
attraction so that it will be an interesting scene to view later.
.
.
9
Useful Shooting Techniques
Amusement Park
Take more shots of the smiling faces of everyone in the family!
.
Taking Videos or Still Images According to the Attraction
You may choose to take videos all the time. However, you may want to take
some still images too.
The following section explains the scenarios suitable for taking videos or still
images.
Scenarios suitable for taking videos
o
Inducing Responses by Calling Out
.
Videos with no waving of hands nor laughter are not only dull when you view
them later, but also put the capability of the audio-recording function of the
camcorder to a waste.
When recording, induce more reactions by enthusiastically waving your
hands or shouting out "Is it fun?" and the like.
Capturing the Best Moment in a Video as a Still Image
Shots with the eyes closed are often taken by accident. To reduce such
mistakes, make use of the function to capture still images from videos.
As videos are actually continuous recording of 60 still images within 1 minute,
using this function allows you to select the best moment and save it as a still
image.
“Capturing a Still Image in the Video during Playback” (A p. 92)
Scenarios with changes in body movement are suitable for taking videos.
.
This includes situations where there are rapid changes in facial expressions
or voices of surprise and delight.
*Some amusement parks do not allow passengers to perform any recording.
Be sure to check beforehand.
[Examples]
Merry-go-round, go kart, coffee cup, etc.
0
Scenarios suitable for taking still images (photos)
o
.
Scenarios with little movement of the subject are suitable for taking still
images.
Try to take the still images from an angle such that the surroundings can be
seen clearly.
[Examples]
Carousal, ferris wheel, fun bicycle rides, etc.
0
Photo by just that good guy jim
.
Creative Commons Attribution-No Derivative Works 3.0
Video Playback in Progress
.
Photo by talk rhubarb
Creative Commons Attribution-No Derivative Works 3.0
Capturing a Still Image
10
Photo by just that good guy jim
.
Creative Commons Attribution-No Derivative Works 3.0
Video Playback in Progress
Advanced Operation with Backlight Compensation
When the subject’s face is in backlight or when the expression cannot be
seen clearly, the Intelligent Auto function of this unit automatically increases
its brightness for recording.
If Intelligent Auto fails to function as expected or if the brightness correction
is insufficient, you can increase the brighness by using backlight
compensation in the Manual mode.
“Setting Details” (A p. 56)
<Without backlight compensation>
o
.
<With backlight compensation>
o
Useful Shooting Techniques
.
11
Getting Started
Precautions on Playing Back 3D Images (for GZ-HM970/GZ-HM965)
Images recorded in 2D mode can be converted to 3D and played back on this unit. You can enjoy realistic and powerful 3D images by playing back on a 3D
compatible TV. Before use, please read the following precautions to ensure safe and comfortable viewing of the 3D images.
Playing Back 3D Images
This unit makes use of the misalignment between the images that enter the left and right eyes to create the 3D effect during 3D playback. As the images that
enter the left and right eyes are different, fatigue may be experienced. In addition, depending on the content of the video, an illusion of movement may be
experienced and result in motion sickness.
3D Display on the LCD Monitor
3D images are supported by the LCD monitor. Press the “3D” button to change the display on the LCD monitor between 3D and 2D.
3D effect appears stronger when viewed at appromimately 30 cm from the front.
0
3D effect may be weak if viewed from an angle other than the front.
0
The LCD monitor appears darker when 3D images are displayed. Change the display to 2D when it is difficult to see, such as when using this unit outdoors.
0
Caution :
Viewing of 3D images is not recommended for people with medical history of photosensitivity, with heart diseases, feel unwell, suffer from lack of sleep,
0
suffer from fatigue, or are drunk.
Medical conditions may worsen.
If you have vision problems such as short-sightedness, long-sightedness, varying vision in the left and right eyes, or astigmatism, it is recommended to
0
correct your vision by wearing glasses, etc.
Stop viewing of 3D images if you see double images.
3D images may appear differently for different people. Correct your vision appropriately before viewing the 3D images.
Stop viewing of 3D images if you experience fatigue or discomfort.
0
Continual viewing of the 3D images may result in health problems.
Take an adequate rest.
Viewing of 3D images in an environment where shaking of the monitor is expected, such as while riding in a vehicle or during walking, may result in fatigue
or discomfort.
If you experience fatigue or discomfort while viewing 3D images on the LCD monitor, set the display to 2D.
0
Continual viewing of the 3D images may result in health problems.
Rest well after viewing 3D images.
0
After viewing 3D images, check that you do not experience fatigue or discomfort before driving, etc.
Take a break every 30 to 60 minutes when viewing 3D images.
0
Long periods of viewing may cause visual fatigue.
Keep a distance of at least 3 times the effective height of the screen when viewing of the 3D images on a 3D compatible TV.
0
Viewing of the 3D images from a distance shorter than the recommended distance may cause visual fatigue.
TV Size Recommended Distance
54” Approx. 2.0 m
50” Approx. 1.9 m
46” Approx. 1.7 m
42” Approx. 1.6 m
Viewing of 3D images is only recommended for ages 5 to 6 and above.
0
Guardians should pay close attention to children as health problems may result if fatigue and discomfort are not noticed immediately.
3D Effect Mechanism
3D images on the LCD monitor of this unit are displayed using the parallax barrier system. Placed in front of an image source, a parallax barrier consists of a
series of slits arranged alternately for the left and right eyes, allowing each eye to see a different image when viewing from a distance, thus creating the 3D
effect. As such, 3D effect may appear weak depending on the angle of viewing.
.
12
Verifying the Accessories
If any of the items are missing or defective, consult your JVC dealer or the nearest JVC service center.
Illustration Description
AC Adapter
AC-V10M (for GZ-HM870/GZ-HM860/GZ-HM855)
Connects to this unit to charge the battery pack.
0
It can also be used when recording or playing back videos indoors.
.
AC Adapter
AP-V30M (for GZ-HM970/GZ-HM965)
Connects to this unit to charge the battery pack.
0
It can also be used when recording or playing back videos indoors.
.
Battery Pack
BN-VG114E
Attaches to this unit to supply power.
0
Getting Started
.
Remote Control
RM-V760U
Operates certain functions from a distance.
0
.
HDMI Mini Cable
Connects this unit to a TV to play back recorded images on the TV in a better quality.
0
.
AV Cable
Connects this unit to a TV to play back recorded images on the TV.
0
.
USB Cable
(Type A - Mini Type B)
Connects this unit to a computer.
0
.
Core Filter (Large)×2 (for AV Cable and optional Component Cable)
Core Filter (Small) (for AC Adapter)
The core filter reduces interference when this unit is connected to other devices.
0
.
13
Getting Started
Plug Adapter (certain AS destinations only)
.
Basic User Guide
Read well and keep in a safe place where it can be accessed easily when necessary.
0
.
Memo :
SD cards are sold separately.
0
“Types of Usable SD Card” (A p. 17)
“Using an Eye-Fi Card” (A p. 18)
When using the AC adapter overseas, please prepare a commercially available converter plug for the country or region of visit.
0
“Charging the Battery Pack Overseas” (A p. 39)
Attaching the Core Filter
Attach the core filter to the power cord of the AC adapter, AV Cable and optional Component Cable as shown in the illustration.
The core filter reduces interference when this unit is connected to other devices.
.
14
Charging the Battery Pack
Charge the battery pack immediately after purchase and when the remaining
battery power is low.
The battery pack is not charged at the time of purchase.
Attach the battery pack.
1
.
Align the top of the battery with the mark on this unit, and slide in until
0
the battery clicks into place.
Connect the AC adapter to the DC connector.
2
Getting Started
You can connect this unit to the AC adapter to record for long hours
0
indoors.
(Battery charging begins when the LCD monitor is closed.)
Detaching the Battery Pack
Slide the battery release lever to detach the battery from this unit.
Approximate Battery Charging Time (Using AC Adapter)
Battery Pack Charging Time
.
* The AC adapter shown in the illustration is AC-V10M.
Plug in the power.
3
0
.
.
The charging lamp blinks when charging is in progress.
It goes out when charging is finished.
Caution :
Be sure to use JVC battery packs.
If you use any other battery packs besides JVC battery packs, safety and
0
performance cannot be guaranteed.
Charging time: Approx. 2 h 30 m (using supplied battery pack)
0
The charging time is when the unit is used at 25°C. If the battery pack is
charged outside the room temperature range of 10°C to 35°C, charging
may take a longer time or it may not start. The recordable and playable
time may also be shortened under some usage conditions such as at low
temperature.
Be sure to use the supplied JVC AC adapter.
If you use any other AC adapters besides the supplied JVC AC adapter,
0
malfunctions may occur.
BN-VG114E
(Supplied)
BN-VG121E 3 h 30 m
BN-VG138E 6 h 10 m
When the battery life is reached, the recording time becomes shorter even
0
if the battery pack is fully charged.
(Replace the battery pack with a new one.)
* The charging time is when the unit is used at 25°C. If the battery pack is
charged outside the room temperature range of 10°C to 35°C, charging may
take a longer time or it may not start. The recordable and playable time may
also be shortened under some usage conditions such as at low temperature.
“Approximate Recording Time (Using Battery)” (A p. 77)
2 h 30 m
Rechargeable Batteries：
When using the battery in a low temperature environment (10°C or below),
0
the operating time may be shortened, or it may not function properly. When
using this unit outdoors in the winter weather, warm the battery, such as
by placing it in the pocket, before attaching it. (Keep away from direct
contact with a warm pack.)
Do not expose the battery to excessive heat, such as direct sunlight or fire.
0
After removing the battery, store it in a dry place between 15°C to 25°C.
0
0
Keep a 30 % battery level (X) if the battery pack is not to be used for a
long period of time. In addition, fully charge and then fully discharge the
battery pack every 6 months, then continue to store it at a 30 % battery
level (X).
Memo :
15
Getting Started
Grip Adjustment
.
A Pull back the pad
B Adjust the length of the belt
C Attach the pad
Caution :
Be sure to fasten the grip belt properly.
0
If the belt is loose, this unit may drop and result in injuries or damages.
Inserting an SD Card
When a commercially available SD card is inserted, recordings can still be
made to the card without stopping when the remaining recording time on the
built-in memory runs out.
“Types of Usable SD Card” (A p. 17)
“Using an Eye-Fi Card” (A p. 18)
“Approximate Video Recording Time” (A p. 77)
Close the LCD monitor.
1
.
Open the cover.
2
.
Insert an SD card.
3
.
Insert with the terminal side facing outward.
0
Warning
Make sure not to insert the card in the wrong direction.
0
It may cause damage to the unit and card.
Turn off the power of this unit before inserting or removing a card.
0
Do not touch the metal contact area when inserting the card.
0
Memo :
When “SEAMLESS RECORDING” is set to “ON”, recordings can still be
0
made to the SD card without stopping when the remaining recording time
on the built-in memory runs out.
Both videos and still images can be recorded on one SD card. It is
0
recommended to confirm the video operation of the SD card before usage.
“SEAMLESS RECORDING” (A p. 134)
To record to the card, it is necessary to perform media settings.
0
When no card is available, set media settings to “BUILT-IN MEMORY” for
recording.
“REC MEDIA FOR VIDEO” (A p. 149)
“REC MEDIA FOR IMAGE” (A p. 149)
To use cards that have been used on other devices, it is necessary to
0
format (initialize) the card using “FORMAT SD CARD” from media
settings.
“FORMAT SD CARD” (A p. 159)
16
Removing the Card
Push the SD card inward once, then pull it out straight.
.
Getting Started
Using SD cards (including SDHC/SDXC cards) other than those specified
0
above may result in recording failure or data loss.
To record videos with “VIDEO QUALITY” set to “UXP”, use of a Class 6
0
compliant SDHC/SDXC card is recommended.
Class 4 and Class 6 are guaranteed to have a minimum transfer rate of 4
0
MB/s and 6 MB/s respectively during reading or writing of data.
You can also use a Class 10 compliant SDHC/SDXC card.
0
Both videos and still images can be recorded on one SD card. It is
0
recommended to confirm the video operation of the SD card before usage.
To protect the data, do not touch the terminals of the SD card.
0
When your computer cannot recognize the SDXC card
Confirm and update the OS of your computer.
Types of Usable SD Card
The following SD cards can be used on this unit.
Operations are confirmed on the SD cards from the following manufacturers.
Panasonic
0
TOSHIBA
0
SanDisk
0
Eye-Fi
0
SD Card
.
This unit supports 256 MB to 2 GB SD cards.
0
Use a Class 4 or higher compatible SD card (2 GB) for video recording.
0
SDHC Card
Windows XP /
Windows XP
SP1
Windows XP
SP2 / Windows
XP SP3
Windows Vista Necessary to update to SP1 or higher.
Windows Vista
SP1 / Windows
Vista SP2
Windows 7 Necessary to download the update software.
Necessary to update to SP2 or higher.
Necessary to download the update software.
(KB955704)
http://www.microsoft.com/downloads/details.aspx?
FamilyID=1cbe3906-ddd1-4ca2-b727c2dff5e30f61&displaylang=en
Necessary to download the update software.
(KB975823)
32 bit version
0
http://www.microsoft.com/downloads/en/
details.aspx?FamilyID=2d1abe01-0942-4f8aabb2-2ad529de00a1
64 bit version
0
http://www.microsoft.com/downloads/en/
details.aspx?FamilyID=7d54c53f-017c-4ea5ae08-34c3452ba315
(KB976422)
32 bit version
0
http://www.microsoft.com/downloads/en/
details.aspx?FamilyID=3ee91fc2-a9bc-4ee1aca3-2a9aff5915ea
64 bit version
0
http://www.microsoft.com/downloads/en/
details.aspx?FamilyID=73f766dd-7127-4445b860-47084587155f
.
Use a Class 4 or higher compatible SDHC card (4 GB to 32 GB) for video
0
recording.
SDXC Card
.
Use a Class 4 or higher compatible SDXC card (Max. 64 GB).
0
Memo :
Mac OS X 10.4
Tiger / Mac OS X
10.5 Leopard
Mac OS X 10.6
Snow Leopard
Not compatible.
Necessary to update to 10.6.5 or later.
17
Getting Started
Using an Eye-Fi Card
Eye-Fi is an SD memory card with wireless LAN function.
Using an Eye-Fi card, you can transfer videos and still images to a computer
or the web. (A broadband wireless LAN environment is required.)
Use of Eye-Fi card may be illegal and prohibited in countries and regions
where it has not been approved by competent authorities. Please contact
Eye-Fi support for the details of approved countries and regions.
Types of Cards
The following Eye-Fi cards can be used on this unit.
Eye-Fi X2 Series
Eye-Fi Connect X2
0
Eye-Fi Explore X2
0
Eye-Fi Pro X2
0
Using the Eye-Fi Card
Make settings on the Eye-Fi card with Eye-Fi Center.
For how to install and operate the Eye-Fi Center, refer to its instruction
manual.
Recorded videos and still images are automatically transferred. (The files
0
already transferred earlier are not transferred again.)
Memo :
You cannot transfer files during the recording mode, editing and formatting
0
of the card.
You cannot transfer video files larger than 2 GB. (as of December, 2010)
0
Transfer may take long or be interrupted depending on the connection
0
conditions.
Icon Description
M
O
O
Identifying the Eye-Fi card
Ready for transfer from the Eye-Fi card
Transferring from the Eye-Fi card (animated)
Using the Touch Screen
Icon operation buttons, thumbnails, and menu items are displayed on the
touch screen according to the mode in use.
There are two ways to operate the touch screen, namely “tap” and “drag”.
0
The following are some examples.
A Tap the displayed button (icon) or thumbnail (file) on the touch screen
to make selection.
B Drag the thumbnails on the touch screen to search for the desired file.
.
Memo :
The touch screen of this unit is pressure-sensitive. When the touch screen
0
does not respond smoothly, apply slightly more force to your fingertip.
Tap the buttons (icons) on the touch screen accurately. The buttons may
0
not respond if they are not tapped on the right area.
Do not press or rub with excessive force.
0
If you apply a protect sheet or a sticker, the touch screen may not respond
0
smoothly.
Do not operate the touch screen using an object with a sharp or hard tip.
0
Pressing two or more places at a time may cause a malfunction.
0
Perform “TOUCH SCREEN ADJUST” if the reactive area of the screen is
0
misaligned with the touched area. (Adjust by lightly tapping with a corner
of an SD card, etc. Do not press with an object with a sharp tip or do not
press hard.)
“TOUCH SCREEN ADJUST” (A p. 153)
We recommend using the AC adapter when transferring files of large size.
0
If it doesn’t operate properly, first make use of Eye-Fi Helper to confirm
0
that the settings of the Eye-Fi card are correct. In addition, try the data
transfer by inserting the Eye-Fi card into other equipment such as a
computer.
Do not use the camcorder in places where wireless use is prohibited such
0
as on a plane.
Before deleting a file, check that you have transferred it to a computer or
0
uploaded it to a video sharing website.
For the latest information on the Eye-Fi card, refer to the website of Eye-
0
Fi, Inc.
http://www.eye.fi/
18
Getting Started
Names of Buttons and Functions on the LCD Monitor
The following screens are displayed during the video and still image modes,
and operate as the touch screens.
Recording Screen (Video/Still Image)
.
Face Short Cut Menu Button
1
Displays a short cut screen of face recognition functions.
0
“Operating the Face Short Cut Menu” (A p. 126)
Zoom Button
2
“Zooming” (A p. 46)
Recording/Playback Mode Button
3
Switches between recording and playback modes.
0
Recording Start/Stop Button
4
g: Video Recording Start Button
0
0
a: Video Recording Stop Button
0
Q: Still Image Recording Button
Menu Button
5
“Operating the Menu” (A p. 125)
Display Button
6
Some displays disappear after approximately 3 seconds.
Use the n button to change the displays as shown below.
0
Tap n button
Displays appear for approximately 3 seconds with every tap.
0
Tap and hold n button
Displays are fixed such that they do not disappear. After setting, the
display button changes from n to m.
Tap m to release the displays.
Playback Screen (Video)
.
Recording/Playback Mode Button
1
Switches between recording and playback modes.
0
Index Screen Button
2
“Operation Buttons for Video Playback” (A p. 78)
Delete Button
3
“Deleting the Currently Displayed File” (A p. 89)
Volume Adjustment Button
4
“Adjusting the Volume of Videos” (A p. 79)
Menu Button
5
“Operating the Menu” (A p. 125)
Operation Buttons
6
“Operation Buttons for Video Playback” (A p. 78)
Playback Screen (Still Image)
.
Recording/Playback Mode Button
1
Switches between recording and playback modes.
0
Index Screen Button
2
“Operation Buttons for Still Image Playback” (A p. 81)
Delete Button
3
“Deleting the Currently Displayed File” (A p. 89)
Menu Button
4
“Operating the Menu” (A p. 125)
Operation Buttons
5
“Operation Buttons for Still Image Playback” (A p. 81)
Index Screen
.
Date Button
1
“Operation Buttons for Video Playback” (A p. 78)
“Operation Buttons for Still Image Playback” (A p. 81)
Recording/Playback Mode Button
2
Switches between recording and playback modes.
0
Index Screen Switching Button (Still image only)
3
“Operation Buttons for Still Image Playback” (A p. 81)
Delete Button
4
“Deleting Selected Files” (A p. 89)
Playback Media Button
5
Switches between SD card and built-in memory.
0
Menu Button
6
“Operating the Menu” (A p. 125)
Page Forward/Back Button
7
“Operation Buttons for Video Playback” (A p. 78)
“Operation Buttons for Still Image Playback” (A p. 81)
19
Getting Started
Menu Screen
.
Help Button
1
Menu Items
2
Return Button
3
Common Menu Button
4
Close Button
5
“Operating the Menu” (A p. 125)
Clock Setting
The “SET DATE/TIME!” screen appears when you turn on this unit for the
first time after purchase, when it has not been used for a long time, or when
the clock is not set yet.
Set the clock before recording.
Open the LCD monitor.
1
.
The unit turns on.
0
When the LCD monitor is closed, the unit turns off.
0
Tap “YES” when “SET DATE/TIME!” is displayed.
2
.
Set the date and time.
3
.
When the year, month, day, hour, or minute item is tapped, “∧” and
0
“∨” will be displayed.
Tap ∧ or ∨ to adjust the year, month, day, hour, and minute.
0
After setting the date and time, tap “SET”.
4
Select the region where you live and tap “SAVE”.
5
.
The city name and time difference are displayed.
0
Tap < or > to select the city name.
0
Memo :
The clock can be reset again later.
0
“Resetting the Clock” (A p. 21)
When using this unit overseas, you can set it to the local time for recording.
0
“Setting the Clock to Local Time when Traveling” (A p. 39)
“SET DATE/TIME!” is displayed when you turn on this unit after it has not
0
been used for a prolonged period.
Connect the AC adapter for more than 24 hours to charge the internal clock
battery of this unit before setting the clock.
20
Getting Started
Resetting the Clock
Set the clock with “CLOCK ADJUST” from the menu.
Tap “MENU”.
1
.
2
Tap “Q”.
.
Tap “CLOCK ADJUST”.
3
Set the date and time.
5
.
When the year, month, day, hour, or minute item is tapped, “∧” and
0
“∨” will be displayed.
Tap ∧ or ∨ to adjust the year, month, day, hour, and minute.
0
After setting the date and time, tap “SET”.
6
Select the region where you live and tap “SAVE”.
7
.
The city name and time difference are displayed.
0
Tap < or > to select the city name.
0
.
Tap ∧ or ∨ to move upward or downward for more selection.
0
Tap “CLOCK SETTING”.
4
.
21
Getting Started
Changing the Display Language
The language on the display can be changed.
Tap “MENU”.
1
.
2
Tap “Q”.
.
Tap “LANGUAGE”.
3
.
Tap ∧ or ∨ to move upward or downward for more selection.
0
Tap to the desired language.
4
Holding this Unit
When holding this unit, keep your elbows close to your sides to prevent
camera shake.
.
Caution :
Be careful not to drop this unit during transportation.
0
Guardians should pay close attention when this unit is being used by
0
children.
Memo :
If camera shake is excessive, use the digital image stabilizer.
0
“Reducing Camera Shake” (A p. 68)
Tripod Mounting
This unit can be mounted on a tripod (or monopod). This is useful for
preventing camera shake and recording from the same position.
.
Tap ∧ or ∨ to move upward or downward for more selection.
0
22
.
To prevent this unit from falling off, check the tripod mounting screw holes
0
and positioning holes on the unit carefully before mounting, and turn the
screws until they are fastened firmly.
Caution :
To prevent injuries or damages which may result if this unit falls off, read
0
the instruction manual of the tripod (or monopod) to be used and make
sure that it is securely attached.
Memo :
It is recommended to use a tripod or monopod when recording in
0
conditions prone to camera shake (such as in dark places or when zoomed
to the telephoto end).
0
Set the digital image stabilizer to b (OFF) when using a tripod for
recording.
“Reducing Camera Shake” (A p. 68)
Getting Started
Using the Remote Control
You can operate this unit from a distance away using the supplied remote
control.
.
Memo :
Point the remote control toward the sensor directly and use it within 5 m
0
from this unit.
The transmitted beam may not be effective or may cause incorrect
0
operation when the sensor is directly exposed to sunlight or powerful
lighting.
Preparing the Remote Control
Operation Buttons on Remote Control Unit
.
Recording Start/Stop Button
1
Starts/stops video recording.
0
Still Image Button
2
Takes a still image.
0
Zoom Button
3
T: Zooms in
0
W: Zooms out
0
Basic Playback Operations
4
Operation Button Description
Playback/Pause
Button
d / e
Starts/pauses playback of videos or slideshows.
0
.
Using the Remote Control for the First Time
.
A button battery (CR2025) is included inside the remote control at the time
0
of purchase.
Remove the insulation sheet before use.
Reinserting the Battery
Left Button j
Right Button i
T Button N
W Button O
Index Button
5
Stops playback and returns to index screen.
0
Info Button
6
Recording: Displays the remaining time (for video only) and battery
0
power.
Playback: Displays file information such as recording date.
0
Moves the cursor to the left.
0
Performs reverse search during playback.
0
Moves the cursor to the right.
0
Performs forward search during playback.
0
Turns up (+) the volume during video playback.
0
Turns down (-) the volume during video
0
playback.
.
Pull out the battery holder by pressing the lock tab.
0
Insert the button battery with the + side facing upward.
0
23
Getting Started
Using Bluetooth-compliant Devices (for GZHM970/GZ-HM870/GZ-HM860)
This unit is equipped with Bluetooth function.
You can do the following using a Bluetooth-compliant device via wireless
connection.
Capabilities of Bluetooth-compliant Devices
Capability Bluetooth-compliant Device
Control the camcorder
Monitor the image during recording
Import recorded still images
Record the location information
*1
Transfer recorded videos
Listen to audio sound/Record audio
sound
*1 The recorded location information can be used on the software provided
with this unit. For more information, refer to “MediaBrowser Help”.
Smartphone
0
Smartphone
0
Smartphone
0
BIP/OPP-compliant device (such
0
as some mobile phones)
Smartphone
0
GPS Receiver
0
Smartphone
0
(Android 2.1 or higher
compatible devices only)
Headset
0
Improving the Communication
A Some connected devices may not be able to support the capabilities
of this unit.
Verify the compatibility before using.
0
B Make sure that there are no obstacles between the Bluetooth-
compliant device and the camcorder.
Position the Bluetooth-compliant device such that it can be seen by the
0
camcorder.
.
Any obstacles or human subjects between the Bluetooth-compliant
0
device and the camcorder will interrupt the communication.
.
When using a headset, use it while facing this unit directly.
0
Using a Bluetooth-compliant Device
For smartphones, install its exclusive application.
1
Register (pair) a device.
2
“Registering a Bluetooth-compliant Device” (A p. 25)
Connect the Bluetooth-compliant device to the camcorder.
3
“Connecting to a Registered Bluetooth-compliant Device” (A p. 27)
Perform some rehearsals (test recordings) before the actual shooting.
4
Perform the actual shooting (operations).
5
.
C Make use of the Bluetooth-compliant device as near to the camcorder
as possible.
Although connections within a range of 10 m may be supported by this
0
unit, the nearer the device, the better the communication.
*If the communication is weak, data transfer may take a longer time or there
may be noise in the audio sound.
24
Getting Started
Compliant Bluetooth Devices
This unit can be connected to the following Bluetooth-compliant devices for
use.
Refer to the instruction manual of the device, except smartphones, to check
its Bluetooth profile.
Device Selection
Target Device/Compliant Profile
(Bluetooth setting
on this unit)
Smartphone
Android Smartphone
0
(Android 2.1 or higher, with Bluetooth SPP
profile)
BlackBerry Bold
0
Touch Diamond
0
Touch Pro
0
BIP/OPP BIP (Basic Imaging Profile, Imaging Responsor)
OPP (Object Push Profile, Push Server)
GPS Receiver SPP (Serial Port Profile, Device B)
Headset 1 HSP (Headset Profile, HS)
For details, refer to the following homepage.
0
http://www.jvc-victor.co.jp/english/download/bluetooth/index.html
Caution :
Operation is not guaranteed on all devices.
0
Communication may not be carried out properly near radio equipment or
0
broadcasting stations. In this case, change the location accordingly.
Radio wave interference by wireless LAN equipment
0
Wireless LAN equipment makes use of the same frequency bandwidth
(2.4 GHz) as that of the Bluetooth devices. Using this product near such
equipment may cause radio wave interference, and result in a drop in
communication speed or connection failure. In this case, turn off the power
of devices that are not in use.
Registering a Bluetooth-compliant Device
In order to use a Bluetooth-compliant device with this unit, it is necessary to
perform registration (pairing) on this unit.
Searching for Bluetooth-compliant Devices to Register
o
Tap “MENU”.
1
.
2
Tap “Q”.
.
Tap “Bluetooth”.
3
.
Tap “REGISTER DEVICE”.
4
.
Tap “SEARCH FOR DEVICE”.
5
.
Select to enable search for the device to register and tap “OK”.
6
.
25
Getting Started
The system starts to search for Bluetooth-compliant devices in the
0
area that can be registered.
The method of setting varies with the device. Refer also to the
0
instruction manual of the device.
Tap the device to register.
7
.
If the device to register cannot be found, check the device settings
0
again and restart search.
If the device name cannot be acquired, the Bluetooth device address
0
(BD address) will appear instead.
Characters in the device name that cannot be displayed are shown
0
as □.
Tap “YES”.
8
Responding to Registration Requests from Bluetooth-
o
compliant Devices
Tap “MENU”.
1
.
2
Tap “Q”.
.
Tap “Bluetooth”.
3
.
If authentication of the device is necessary, the passkey entry screen
0
will appear.
If authentication of the device is not necessary, the passkey entry
0
screen will not appear.
Enter the passkey for the device to register.
9
.
Tap on a numeric character to enter it.
0
Tap “DELETE” to clear the last numeric character.
0
After input of the numeric characters is complete, tap “SET”.
0
The number of digits in a passkey varies with the device to register.
0
A passkey is also known as a "PIN code".
0
For details on the passkey, refer to the instruction manual of the
0
device to register.
After registration of the device is complete, tap “OK”.
0
.
Tap “REGISTER DEVICE”.
4
.
Tap “WAIT FOR DEVICE”.
5
.
Tap “OK” when “WAIT FOR REQUEST FROM Bluetooth DEVICEALL
6
CURRENT CONNECTIONS WILL BE DISCONNECTED” is displayed.
26
.
This unit goes into a standby mode to wait for registration requests
0
from Bluetooth-compliant devices. Perform the registration settings
on the device to register.
The method of setting varies with the device. Refer also to the
0
instruction manual of the device.
Tap “YES”.
7
.
If authentication of the device is necessary, the passkey entry screen
0
will appear.
If authentication of the device is not necessary, the passkey entry
0
screen will not appear.
Enter the passkey for the device to register.
8
Getting Started
Connecting to a Registered Bluetooth-compliant Device
To use a Bluetooth-compliant device on this unit, it is necessary to establish
connection with the device after registering it.
To establish connection with a Bluetooth-compliant device, make use of the
menu to set the connection with the device to ON.
Tap “MENU”.
1
.
2
Tap “Q”.
.
Tap on a numeric character to enter it.
0
Tap “DELETE” to clear the last numeric character.
0
After input of the numeric characters is complete, tap “SET”.
0
The number of digits in a passkey varies with the device to register.
0
A passkey is also known as a "PIN code".
0
For details on the passkey, refer to the instruction manual of the
0
device to register.
After registration of the device is complete, tap “OK”.
0
Memo :
Registration may fail depending on the device you are using. In addition,
0
connection may fail to establish even if the device is registered.
Results of device search vary according to the selected device, condition
0
of signals, and position of the device.
The auto power off, power-saving, and demo modes are not available
0
during registration of a Bluetooth device.
Deleting Registered Devices
You can delete a registered device by selecting “DELETE DEVICE” in step
4.
.
Tap “Bluetooth”.
3
.
Tap “CONNECT”.
4
.
Tap the device to connect.
5
.
When a device with the “OFF” icon is tapped, the icon changes to
0
“ON”, and an icon indicating the radio reception status is displayed.
When a device with the “ON” icon is tapped, it gets disconnected and
0
the icon changes to “OFF”.
When an unregistered item is selected, a screen to select device will
0
appear.
27
Getting Started
Caution :
If connection cannot be established with a device, check the registered
0
devices and register again.
Up to two Bluetooth devices can be connected to this unit.
0
Sending or receiving of audio data using the headset is not possible in the
0
still image recording mode.
When “FACTORY PRESET” in the COMMON (basic settings) menu is
0
executed, all information of the registered Bluetooth-compliant devices
will be erased.
The auto power off, power-saving and demo modes are not available
0
when a Bluetooth device is connected.
About Disconnections：
Connection of this unit with the Bluetooth-compliant device will be cut off
automatically in the following cases.
When the power of this unit is turned off
0
When this unit is connected to a DVD writer or PC with a USB cable
0
When time-lapse shooting is performed
0
When “FACTORY PRESET” in the COMMON (basic settings) menu is
0
executed
Memo :
When communication with the connected device fails, this unit will
0
disconnect the device after about 10 seconds.
Indications when a Bluetooth-compliant Device is Connected
You can check the Bluetooth connection status on the recording screen.
Table of Compatible Connections
Connection Case Case 1 Case 2 Case 3 Case 4 Case 5
Headset 1
Headset 2
GPS Receiver -
BIP/OPP - - - - -
Smartphone - - -
P P
P
-
P P
-
P
P
-
- -
P P
-
P
Changing the Settings of a Registered Bluetooth-compliant Device
You can change the settings of a registered Bluetooth-compliant device.
The audio settings of the headsets may also be changed.
Tap “MENU”.
1
.
2
Tap “Q”.
.
Display Icon
GPS
A
Communication
Status
Radio Reception
B
Status
Bluetooth
C
Microphone
Volume
Displays the communication status with the
GPS.
The icon will appear blinking if location
information cannot be acquired from the
GPS.
Displays the radio reception status of the
Bluetooth connection.
Displays the microphone's volume level when
the Bluetooth microphone is enabled.
Description
Memo :
The radio reception status is only a guide. It is not displayed in real-time.
0
Indications may not be updated according to the condition of signals. The
0
response is especially slow when the radio reception status changes from
weak to strong.
The radio reception status is not displayed during BIP/OPP connection.
0
As communication with the connected device is necessary to retrieve
0
radio reception status, the status may not be updated if communication is
interrupted suddenly such as by turning off the power.
.
Tap “Bluetooth”.
3
.
Tap “CHANGE SETTINGS”.
4
.
Tap the desired device.
5
28
.
Getting Started
Smartphone Changes the mobile phone to be used as smartphone.
GPS Receiver Changes the device to be used as GPS receiver.
Headset 1/
Headset 2
Changes the device to be used as headset 1 or headset
2.
Audio settings (“EARPHONES AUDIO”, “MIC AUDIO”)
may also be turned ON/OFF.
EARPHONES AUDIO 1/2: Selects whether to output
the headset microphone input from the headset
earphones.
Microphone audio of the camera will be output from
0
the earphones even when this is set to “OFF”.
“EARPHONES AUDIO 1/2” is common for headset 1
0
and headset 2. ON/OFF cannot be set separately.
MIC AUDIO: Selects ON/OFF for the headset
microphone input.
Memo :
The connection setting becomes “OFF” after the device is changed.
0
Change the setting to “ON” from the menu.
“Connecting to a Registered Bluetooth-compliant Device” (A p. 27)
Transferring Still Images to a Bluetooth-compliant Device
When Bluetooth connection is established with a BIP/OPP-compliant
device, you can transfer recorded still image data to this device.
Select still image mode.
1
.
2
Tap q to select the playback mode.
.
Tap “MENU”.
3
.
Tap “STILL IMAGE TRANSFER”.
4
.
Set the connected device to the data reception mode.
5
For detailed operating instructions, refer to the instruction manual of
0
the connected device.
Check to ensure that the image to be transferred is correct and tap “YES”
6
.
.
The image to be transferred appears on this screen.
0
0
Tap h / g to select the previous or next file.
Confirm the destination to transfer to and tap “TRANSFER”.
7
29
Getting Started
.
To reduce the image for transferring, tap “SHRINK AND TRANSFER”
0
.
To change the destination to transfer to, tap “CHANGE
0
DESTINATION”.
After image transfer is complete, tap “EXIT”.
0
To continue to transfer more images, tap “SEND OTHER IMAGES”.
0
“DEVICE IS NOT SET” appears when the destination to transfer to is
0
not set.
Tap “SET” and select the device to transfer to.
Memo :
If the connected device is compliant with both BIP and OPP, BIP
0
connection takes priority.
Selection of connection is not possible. OPP connection will only take
place if BIP connection fails.
Before starting image transfer, be sure to turn on the Bluetooth
0
connectivity of the connected device and set it to the data reception mode.
Transmission will fail if the Bluetooth connectivity is set after image transfer
starts.
To transfer still images to a smartphone, make use of an application
0
software for smartphones.
(When a registered smartphone is selected as the destination to transfer
to, the smartphone setting is canceled and it is necessary to make the
setting once more.)
“Operation Using a Smartphone” (A p. 30)
Only one still image can be transferred at a time. To transfer more still
0
images, tap “SEND OTHER IMAGES” and select another image.
Still images cannot be transferred from the connected device to the
0
camcorder.
Depending on the specifications of the connected device, you may not be
0
able to see or edit the file even if it is transferred successfully.
To see or edit the file on the connected device, refer to the instruction
manual of the connected device for the compatible image size and transfer
using “SHRINK AND TRANSFER”.
About BIP Connection：
The conditions (image size, data size) for still image transfer are obtained
0
from the connected device.
Still images are then transferred as follows according to the obtained
conditions.
(1) If the image size meets the conditions, the image will be transferred
without any changes.
(2) If the image size is too big, the image will be reduced to VGA (640×480)
or FWVGA (854×480).
(3) If the data size is too big, the image will also be reduced to VGA
(640×480) or FWVGA (854×480).
About OPP Connection：
Still image transfer may fail even if the connected device is compliant with
0
OPP connection.
It depends on the file format that can be received by the device.
When “SHRINK AND TRANSFER” is selected, the still image to transfer
0
will be reduced to the following sizes.
- For still images with 4:3 aspect ratio: VGA (640×480)
- For still images with 16:9 aspect ratio: FWVGA (854×480)
Operation Using a Smartphone
You can use a smartphone as a remote control for this unit using the preinstalled application on the phone.
This unit supports the following smartphones.
Android Smartphone (Android 2.1 or higher, with Bluetooth SPP profile)
0
BlackBerry Bold
0
Touch Diamond
0
Touch Pro
0
Memo :
Operation is not guaranteed on all devices.
0
For details, refer to the following homepage.
0
http://www.jvc-victor.co.jp/english/download/bluetooth/index.html
Application Software for Android Smartphone
0
- For downloads, refer to the following.
http://www.jvc-victor.co.jp/english/download/bluetooth/index.html
Application Software for Android Smartphone
0
- For operating instructions, refer to the following.
“Bluetooth Application for Smartphones” (A p. 31)
Application Software for BlackBerry Bold / Touch Diamond / Touch Pro
0
- For downloads and operating instructions, refer to the following.
http://www.jvc-victor.co.jp/english/download/bluetooth/index.html
Caution :
When a smartphone is used as a remote control, the simultaneous still
0
image recording function on this unit will be disabled.
Bluetooth capabilities are limited during HDMI connection in the 3D mode.
0
Set this unit to the 2D mode in this case. (for GZ-HM970/GZ-HM965)
Memo :
Data packet charges may be incurred when using GPS.
0
When the smartphone is connected to other Bluetooth-compliant devices,
0
connection of the phone with this unit may fail.
When the smartphone is connected to this unit, connection of the phone
0
with other Bluetooth-compliant devices may fail.
Disconnection may occur due to requests from the smartphone. Restart
0
the application on the phone if it is disconnected.
30
Loading...