JVC GR-FXM373EGX, GR-FXM373EGY Schematics

AC Adapter AP-V10EG
Power requirement : AC 110 V to 240 V`,
50 Hz/60 Hz
Output : DC 11 V
, 1 A
Dimensions : 59 mm x 31 mm x 84 mm (W x H x D)
Weight : Approx. 140 g
Optional Accessories
• Battery Packs BN-V12U, BN-V20U, BN-V400U
• Compact S-VHS (
) Cassettes SE-C45/30
• Compact VHS (
) Cassettes EC-60/45/30
• Remote Control Unit RM-V700U
• Active Carrying Bag CB-V7U
• Cassette Adapter C-P7U
Camcorder
General
Format : VHS PAL standard Power source : DC 11 V
(Using AC Adapter) DC 6 V
(Using battery pack)
Power consumption
Viewfinder on : 4.0 W LCD monitor on : 4.5 W
Video light : 3.0 W Signal system : PAL-type Video recording system
Luminance : FM recording
Colour : Converted sub-carrier
direct recording Conforms to VHS standard
Cassette :
/ cassette
Tape speed
SP : 23.39 mm/sec.
LP : 11.70 mm/sec. Recording time (max.)
SP : 60 minutes
LP : 120 minutes
(with EC-60 cassette)
Operating
temperature :0°C to 40°C
Specifications shown are for SP mode unless otherwise indicated. E & O.E. Design and specifications subject to change without notice.
Operating humidity : 35% to 80% Storage temperature : –20°C to 50°C Weight : Approx. 900 g Dimensions : 200 mm x 112 mm x 118 mm
(W x H x D) (with the LCD monitor closed
and with the viewfinder full tilted downward)
Pickup : 1/4" format CCD Lens : F1.6, f = 3.9 mm to 62.4 mm,
16:1 power zoom lens with auto iris and macro control, filter diameter 40.5 mm
Viewfinder : Electronic viewfinder with 0.5"
black/white CRT
White balance
adjustment : Auto/Manual adjustment
LCD monitor : 2.5" diagonally measured, LCD
panel/TFT active matrix system
Speaker : Monaural
Connectors
JLIP/EDIT : ø3.5 mm, 4-pole, mini-head
jack (compatible with RC-5325 plug)
Video : 1 V (p-p), 75 unbalanced,
analogue output (via Video output connector)
Audio : 300 mV (rms), 1 k analogue
output (via Audio output connector)
Some accessories are not available in some areas. Please consult your nearest JVC dealer for details on accessories and their availability.
COMPACT VHS CAMCORDER
GR-FXM373EG
CD-ROM No. SML200103
VICTOR COMPANY OF JAPAN, LIMITED VIDEO DIVISION
Printed in Japan
S40894
Regarding service information other than these sections, refer to the GR-FXM37EG service manual (No. 86589). Also, be sure to note important safety precautions provided in the service manual.
SPECIFICATIONS
0
(The specifications shown pertain specifically to the model GR-SXM247, 347, 747UM)
This Schematic Diagrams is printed on 100% recycled paper.
COPYRIGHT
© 2001 VICTOR COMPANY OF JAPAN, LTD.
No. 86622SCH
March 2001

4.1 BOARD INTERCONNECTIONS

5
4
SECTION 4
CHARTS AND DIAGRAMS
3
2
1
4-1
ABCD
Note1: How to find the page showing the continuative schematic diagram
Example)
2: The mark
TO CPU (Page 4-5): TO DSP (Page 4-3):
means modified points.
Refer to the GR-FXM37EG, SXM607EG/EK service manaul (No. 86589)
Refer to this service manual
EFGH
4-2

4.2 DSP SCHEMATIC DIAGRAM

5
4
3
2
1
3. The mark means modified points.
4-3
ABCD
NOTES:¡For the destination of each signal and further line connections that are cut off from
this diagram, refer to “4.1 BOARD INTERCONNECTIONS”.
¡
When ordering parts, be sure to order according to the Part Number indicated in the Parts List.
Note: How to fins the page showing the continuative schematic diagram.
Example)
EFG
TO DSP : TO DSP :
Refer to the reference model’s service manaul.
Refer to this service manual.
H
4-4

4.3 IRIS & AF/ZOOM SCHEMATIC DIAGRAM

5
4
3
2
1
4-5
1. THE PARTS WITH MARKED (*) IS NOT USED.
NOTES :
2. The mark means modified points.
ABCD
Loading...
+ 11 hidden pages