JVC GR-DVL157 User Manual
USB CONNECTION KIT
INSTRUCTIONS
LYT0734-001A
EN
2 EN
JVC SOFTWARE LICENSE AGREEMENT
IMPORTANT
TO CUSTOMERS:
MAKE SURE TO READ THIS CAREFULLY BEFORE OPENING THE SEALED SOFTWARE
PACKETS
Thank you for purchasing our product. In order to start using the software program enclosed, you are required to accept the terms and conditions of the agreement as provided below.
Software License Agreement
This is a legal agreement between you (either an individual or an entity) and Victor Company
of Japan, Limited (JVC). By opening the sealed software packages and/or by using the Program, you are agreeing to be bound by the terms of this Agreement. Should you not agree to
the terms hereof, return the unopened software packets and the accompanying items to the
place where you obtained them.
1. GRANT OF LICENSE
This License Agreement (Agreement) permits you to use the software program (Program)
enclosed in this package and/or the accompanying written material (e. g. printed manuals).
Although you are also granted license to load the Program into temporary memory (i. e. RAM)
or install the Program once into permanent memory (e. g. hard disk, CD-R, or other storage
device) of one (1) computer system, you are strictly prohibited to install the Program on a
network server for the sole purpose of internal distribution.
2. COPYRIGHT
Notwithstanding the provision of Article 1 hereof, any copyright in the Program is owned exclusively by JVC and is protected by the Japanese copyright law, copyright laws of other
countries, as applicable, and relevant provisions under international treaties including the
Berne Convention for the Protection of Literary and Artistic Works, as amended, and the
Universal Copyright Convention, as amended. Therefore, you must treat the Program like any
other copyrighted material except that you may either (a) make one (1) copy of the Program
solely for your personal backup or archival purposes, or (b) transfer the Program to a single
hard disk, provided that you keep the original solely for your personal backup or archival
purposes.
3. RESTRICTION ON THE PROGRAM
Y ou may not reverse engineer , decompile, disassemble, revise or modify the Program, except
to the extent that such restriction is expressly prohibited by applicable law. JVC and its distributors and dealers shall not be liable for any claims or defects etc. arising out of or in
connection with such prohibited activities as indicated in this Agreement.
4. OTHER RESTRICTIONS
Y ou may not rent, lease or transfer the Program to any third party nor let such a party use the
Program.
EN 3
5. LIMITED WARRANTY
JVC warrants that any media in which the Program is embodied (e.g. floppy discs, CD-ROM,
etc.) are free from any defects in materials and workmanship for a period of thirty (30) days
from the date of your purchase and that any hardware accompanying the Program is also free
from defects to the extent provided in the attached Warranty Form. JVC’s entire liability and
your exclusive remedy in connection with the Program shall be, at JVC’s option, either (a)
return of the price paid, or (b) replacement of defective Program media.
6. DISCLAIMER OF WARRANTIES
EXCEPT FOR THE EXPRESS WARRANTIES ST ATED HEREIN AND TO THE EXTENT PERMITTED BY APPLICABLE LAW, JVC AND ITS SUPPLIERS DISCLAIM ANY OTHER WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE IN
REGARD TO THE PROGRAM AND THE ACCOMPANYING PRINTED MATERIALS.
7. LIMITED LIABILITY
TO THE EXTENT PERMITTED BY APPLICABLE LAW, IN NO EVENT SHALL JVC AND ITS
SUPPLIERS BE LIABLE FOR ANY INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES WHATSOEVER, REGARDLESS OF THE FORM OF ACTION WHETHER
IN CONTRACT, TORT, STRICT PRODUCT LIABILITY OR OTHERWISE (INCLUDING BUT
NOT LIMITED TO DAMAGES FOR LOSS OF PROFITS, BUSINESS INTERRUPTION, LOSS
OF BUSINESS INFORMATION OR ANY OTHER PECUNIARY LOSS) ARISING OUT OF OR
IN CONNECTION WITH THE USE OF OR INABILITY TO USE THE PROGRAM, EVEN IF
JVC HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
Victor Company of Japan, Limited
4 EN
CONTENTS
JVC SOFTWARE LICENSE AGREEMENT 2
CONTENTS 4
SECTION FOR Windows
Operating Environment .................................................................................... 5
Connection ......................................................................................................5
Installing the Software (For Windows
Installing the Software (For Windows
Installing the Software (For Windows
Copying Image Data from the Digital Video Camera to the Computer.............. 9
®
®
98)........................................................6
®
2000).................................................... 7
®
Me)....................................................... 8
SECTION FOR Macintosh 10
Operating Environment .................................................................................. 10
Connection ....................................................................................................10
Installing the Software .................................................................................... 11
Copying Image Data from the Digital Video Camera to the Computer............ 12
Uninstalling the Software ...............................................................................13
Presto! Mr. Photo Gold 15
NOTICE FOR USERS 21
What is the USB Connection Kit?
The USB connection kit is software packets that allow you to transfer images from the digital video camera
to a personal computer running the Windows® 98/2000/Me or Macintosh operating system using the USB
cable.
Once you have transferred images from your camera to your computer, you can use the provided “Presto!
Mr. Photo Gold” to process, edit, and organize your images.
5
CAUTION:
● Do not attempt to play the provided CD-ROM on an audio CD player or portable CD
player. Doing so could generate excessively strong signals that could damage the
circuitry or speakers in an audio CD player.
How to handle a CD-ROM
Take care not to soil or scratch the mirror surface (opposite to the printed surface). Do not
●
write anything or put a sticker on either the front or back surface. If the CD-ROM gets
dirty, gently wipe it with a soft cloth outward from the center hole using a circular motion.
● Do not use conventional disc cleaners or cleaning spray.
● Do not bend the CD-ROM or touch its mirror surface.
● Do not store your CD-ROM in a dusty, hot or humid environment. Keep it away from
direct sunlight.
SECTION FOR Windows
EN 5
®
Operating Environment
The host computer that runs the Windows
operating environment must satisfy the following
conditions.
USB Driver
1. Microsoft® Windows® 98 (pre-installed)/
Microsoft® Windows® 98 Second Edition (preinstalled)
2. USB connector
3. CD-ROM drive
* The system requirements information is not a
guarantee that provided software applications will
work on all personal computers meeting those
requirements.
* Microsoft®, Windows® are either registered
trademarks or trademarks of Microsoft corporation
in United States and/or other countries.
* Other trademarks are property of their respective
owners.
NOTE:
●
If you are using Windows® 2000 Professional/
Windows® Me, the information file (.inf) that is
needed in order to install the standard driver that
is provided with the OS is provided in this packet.
®
Connection
● Connect the camera directly to the USB on the
computer. The camera may not operate properly
if it is connected to a USB hub.
● Use only the provided USB cable; do not use an
extension cable.
● We recommend that you use the AC Power
Adapter/Charger.
Digital video camera
USB
USB cable
(provided)
To USB
Windows® PC
6 EN
Installing the Software
(For Windows
For details on the basic operation of Windows® 98,
refer to the instruction manual provided with your
computer or Windows® 98.
Preparation
Start Windows® 98.
● If you are running other software, close that
software. (Make sure that there are no other
application icons open on the task bar.)
Set the VIDEO/DSC switch to “DSC”.
1
Turn the camera’s POWER switch to “ ”.
2
Connect the camera to the computer using
3
the provided USB cable. (Z pg. 5)
•The “Add New Hardware Wizard” window
will appear.
•“USB MODE” appears on the LCD panel.
Load the provided CD-ROM to the CD-ROM
4
drive.
Click the “Next” button.
5
Click the “Next” button.
6
Confirm that “CD-ROM drive” has been
7
checked, then click the “Next” button.
•When the loaded CD-ROM is not found,
click “Browse” button and select the
provided CD-ROM.
Click the “Next” button.
8
Click the “Finish” button.
9
®
98)
SECTION FOR Windows® (cont.)
Installing the Software
(For Windows
For details on the basic operation of
Windows® 2000, refer to the instruction manual
provided with your computer or Windows® 2000.
Preparation
Start Windows® 2000.
● If you are running other software, close that
software. (Make sure that there are no other
application icons open on the task bar.)
Set the VIDEO/DSC switch to “DSC”.
®
2000)
1
Turn the camera’s POWER switch to “ ”.
2
Connect the camera to the computer using
3
the provided USB cable. (Z pg. 5)
•The “Add New Hardware Wizard” window
will appear.
•“USB MODE” appears on the LCD panel.
Load the provided CD-ROM to the CD-ROM
4
drive.
Click the “Next” button.
5
Click the “Next” button.
6
Confirm that “CD-ROM drive” has been
7
checked, then click the “Next” button.
•When the loaded CD-ROM is not found,
click “Browse” button and select the
provided CD-ROM.
Click the “Next” button.
8
Click the “Finish” button.
9
EN 7
8 EN
Installing the Software
(For Windows
For details on the basic operation of Windows® Me,
refer to the instruction manual provided with your
computer or Windows® Me.
Preparation
Start Windows® Me.
● If you are running other software, close that
software. (Make sure that there are no other
application icons open on the task bar.)
Set the VIDEO/DSC switch to “DSC”.
1
Turn the camera’s POWER switch to “ ”.
2
Connect the camera to the computer using
3
the provided USB cable. (Z pg. 5)
•The “Add New Hardware Wizard” window
will appear.
•“USB MODE” appears on the LCD panel.
Load the provided CD-ROM to the CD-ROM
4
drive.
Click the “Next” button.
5
Select the “JVCDSCME.INF” in the “ME”
6
folder, and click the “OK” button.
Click the “Finish” button.
7
®
Me)
SECTION FOR Windows® (cont.)
Loading...