TW
MAJOR FEATURES VIDEO CAPTURE
CONNECTIONS
JLIP Video Capture Software
For further operating procedures, refer to
pages 5–39 in the software's instruction
manual.
Video Capture Facility
Video images from a camcorder can be
captured as 640 x 480 still images with 16.77
million colours through the serial port (RS232C) of a WindowsT-operated computer.
JLIP Control Facility
With a JLIP compatible camcorder:
• all basic video operations can be
executed via the computer display;
• Up to 99 images can be captured
automatically with Program Video
Capture (playing tape — scanning —
transferring to PC).
Data Sharing With JLIP Video
Producer Software
Data can be imported from the JLIP Video
Producer Software.
Data from the Video Capture Software can
also be exported to the Video Producer
Software for Program Playback or Assemble
Editing.
JLIP Video Producer Software
For further operating procedures, refer to
pages 41–68 in the software's instruction
manual.
JLIP Control Facility
With a JLIP-compatible camcorder:
• all basic video operations can be
executed on the computer display;
• allows programmed video playback (up
to 99 programs) or assemble editing.
Data Sharing with the Video Capture
Software
Video Capture Software data can be exported
to the Video Producer Software.
Assemble Editing
Selected scenes on a pre-recorded tape can
be edited in a specified sequence.
Pre-recorded tape
(on camcorder)
Recording tape
(on VCR)
Image Data Flow (When Using JLIP Video Capture Software)
GR-DLS1
DVF (DV still image data)
PC
(stored in the PC's memory and
displayed on the monitor)
NOTES:
•The index image is displayed in the
image display box.
•Each time the image display box is
double-clicked, the full image data (640
x 480 pixels) is displayed only after full
image data transfer is finished.
The transfer image (640 x 480) is captured from the GR-DLS1 in DVF format.
When you want to change its format to Bitmap or JPEG, select "File"—"Save Image As..."
before saving.
(refer to page 20 in the software's
instruction manual)
You can save the image data on a
hard drive or floppy disk, in 3
different formats.
• DVF (DV still image data) takes up
about 120 K
• Bitmap takes up about 900 K
• JPEG (image compression format
with quality set to 75) takes up
about 50 K (varies depending on
the image quality selected)
4
4
n To assure safety, make sure all units are turned off before making any connections.
n We recommend that you use the AC Power Adapter/Charger.
n When connecting the provided cables, be sure to plug the connectors equipped with core
filters into the camcorder.
n Do not make any connections to the camcorder's DV OUT connector.
WHEN CONNECTED TO A VCR EQUIPPED WITH A REMOTE
PAUSE JACK
When JLIP VIDEO
PRODUCER is used:
When JLIP VIDEO CAPTURE is used:
To JLIP jack
To A V-OUT
jack
To S-VIDEO OUT jack
S-VIDEO cable
Core Filter
Core Filter
AUDIO/VIDEO
cable
To S-VIDEO input jack
To remote
pause jack
Editing cable
Core Filter
To EDIT jack
JLIP-PC connection
cable
PC
To COM port
(RS-232C)
Connect this if the video unit has an
S-Video input jack.
Camcorder
VCR
(Recording deck)
White to AUDIO L
Red to
AUDIO R
Yellow to VIDEO
Core Filter
When JLIP VIDEO PRODUCER is
used:
WHEN CONNECTED TO A VCR NOT EQUIPPED WITH A
REMOTE PAUSE JACK
When using a VCR not equipped with a remote pause jack, set your VCR brand using the RMV711U remote control unit, then perform editing using the RM-V711U.
For further operating procedures, refer to pages 63–67 in the camcorder's instruction manual.
When JLIP VIDEO CAPTURE is used:
To JLIP jack
To AVOUT jack
To S-VIDEO
OUT jack
S-VIDEO cable
Core Filter
AUDIO/
VIDEO
cable
To
remote
pause
jack
Editing cable
Core Filter
To EDIT jack
JLIP-PC connection
cable
PC
To COM port
(RS-232C)
Connect this if the video unit has an
S-Video input jack.
Camcorder
VCR
(Recording deck)
RM-V711U
Remote
control unit
To S-VIDEO input
jack
White to AUDIO L
Red to
AUDIO R
Yellow to VIDEO
Core Filter
ADDITIONAL INFORMATION FOR
PC CONNECTION
Core
Filter
LYT0188-001A (YP)
VIDEO CAPTURE WINDOW BUTTONS AND DISPLAYS VIDEO PRODUCER WINDOW BUTTONS AND DISPLAYS
01
00:01:23:120200:02:17:210300:07:01:19
06
00:39:03:110700:47:53:03
08
05
00:20:39:18
04
00:37:05:06
--:--:--:--
JLIP
File Edit Set-up Window Help
INPUT
MEMORY
TRANSFERCAPTURE
JLIP Video Capture [–Untitled Folder–] (Untitled)
Close button
1
Menu bar
2
Control buttons
Image display area
When connected to the GR-DLS1, there are several items that cannot be operated:
1
Menu bar
•"Edit"—"Transfer the Index Image"
This command cannot be used with this system.
•"Edit"—"Transfer the Full Image"
This command cannot be used with this system.
•"Set-up"—"Image Format"
This command cannot be used with this system.
•"Set-up"—"Counter Reset"
Since the GR-DLS1 records its counter data on the tape as a time code, counter reset is
not possible.
2
Control buttons
•MEMORY/INPUT buttons
These buttons do not fuction.
JLIP VIDEO PRODUCER
FILE
POWER
PROGRAM PLAYBACK
COUNTER
Drop
MEMO
ID
SCENE
CUT IN CUT OUT
SCENE
ELAPSED TIME
00:04:58:19F
IN/OUT
OFFON
00:00:00:09F
06
File Set-up HelpWindowEdit
START
01
02
03
04
00:05:00:12
00:06:10:12
00:07:33:10
00:08:51:05
00:06:04:16
00:07:30:15
00:08:45:15
00:10:13:12
BF
B W
EC
TC
BF
WF
B
W
WF
Control-menu box
Menu bar
POWER button
COUNTER system
Tape counter display
ID number
Title bar
FILE name
Icon button
MEMO
Fade/Wipe Effect
buttons
Message display
IN/OUT point button
P.AE/Effect buttons
START button
SCENE button
Camcorder's operation buttons
ELAPSED TIME
IN/OUT point display
When connected to the GR-DLS1, there are several items that cannot be operated:
● "Set-up"—"Device Change"
Since it is impossible to connect to 2 or more GR-DLS1's, there is no need to change the
connected unit.
● "Set-up"—"Counter Reset"
Since the GR-DLS1 records its counter data on the tape as a time code, counter reset is not
possible.
● "Set-up"—"Function Set"—"Auto Capture"
Since it is impossible to also connect to the JLIP connector on the GV-PT1/GV-PT2 video
printer, you cannot control the video printer.
● "Window"—"Video Printer"
Since it is impossible to also connect to the JLIP connector on the GV-PT1/GV-PT2 video
printer, you cannot control the video printer.
TROUBLESHOOTING LIST OF ERROR MESSAGES
Message
Check the capture device.
v Appears when:
m Action:
v Image capture is unavailable when the GR-DLS1 is in
any mode other than playback.
m Set the GR-DLS1 to the playback mode, and try
capture again.
v Image capture is unavailable when the ID number of
the GR-DLS1 has not been confirmed.
m Execute JLIP initialization to confirm the ID number.
v If operation stops after this message appears, do the
following:
1. Turn off the power to the connected units and turn it
on again.
2. Close this software program and start it up again.
3. Initialize JLIP.
Images stored in memory will be lost. (refer to page 10
in the software's instruction manual)
Problem
No effect when clicking the
Input Select/Memory buttons.
"SEND" appears on the GRDLS1's monitor.
The captured image differs
from the image on the GRDLS1.
When capturing an image
shot by the GR-DLS1 in wide
mode.
JLIP Video Capture Software
does not work.
Step by Step Capture mode is
not available.
Cause
v These buttons do not function.
v This is displayed during image transfer from the GR-
DLS1 to a PC. The GR-DLS1's monitor displays a blue
background and the playback image cannot be
viewed.
v If the captured image has special effects (such as
digital zooming during playback or Sepia mode), the
image is captured without the effects.
v Its index image is displayed with an aspect ratio of 4:3.
However, the full image is displayed and is saved with
an aspect ratio of 16:9.
v It is displayed with an aspect ratio of 4:3 in the 16
Segment Image window.
But when the image is saved or printed, it has an
aspect ratio of 16:9. When printed on a regular 16division sticker sheet, the printed image is shifted
towards the upper end of the sticker sheet.
v Click "Set-up"—"Device Change".
Select "Use the capture function of the device
selected above" in the "Device Selection" window.
v When connected to the GR-DLS1, you cannot capture
an image in any mode other than normal playback or
still image playback mode. Also, when capturing an
image recorded with special effects added, only the
original image is captured; images and effects cannot
be captured together. (refer to page 16 in the
software's instruction manual)
When using JLIP Video Capture Software: When using JLIP Video Capture Software:
When using JLIP Video Producer Software:
Problem
MOSAIC FADER button is not
displayed in the JLIP VIDEO
PRODUCER window.
When setting up a programmed scene, the image is
played back with the same
P.AE/Effect as used in the
previously programmed
scene.
Cause
v When connected to the GR-DLS1, MOSAIC FADER
effect is not available.
v P.AE/Effect buttons can be used to spice up
programmed scenes. If you set an effect in a
programmed scene, the effect is also applied to the
camcorder's playback image until this particular scene
is previewed.
Therefore, after selecting an effect, always click on
"SCENE" to preview the effect. (refer to pages 49 and
54 in the software's instruction manual)
Loading...