JVC GR-DF420EK User Manual

DIGITAL VIDEO CAMERA

Dear Customer,

Thank you for purchasing this digital
video camera. Before use, please
read the safety information and
precautions contained in the pages
3 – 4 and 9 to ensure safe use of this
product.

ENGLISH

GR-DF420

Please visit our Homepage on the World Wide Web for
Digital Video Camera:

http://www.jvc.co.jp/english/cyber/

For Accessories:

http://www.jvc.co.jp/english/accessory/

GETTING STARTED

VIDEO RECORDING &
PLAYBACK

ADVANCED FEATURES

REFERENCES

TERMS

6

17

25

42

51

INSTRUCTIONS

To deactivate the demonstration,
set “DEMO MODE” to “OFF”.
(墌 pg. 25, 28)

LYT1401-001B

EN

2 EN

Major Features of this Camcorder

Wipe/Fader Effects

You can use the Wipe/Fader Effects to make
pro-style scene transitions. (墌 pg. 36)

Fade in

Fade out

Program AE with Special Effects

For example, “SPORTS” mode allows fast­moving images to be captured one frame at a
time, for vivid, stable slow-motion. (墌 pg. 37)

Backlight Compensation

Simply pressing the BACK LIGHT button
brightens the image darkened by backlight.
(墌 pg. 34)

● You can also select a spot metering area so
that more precise exposure compensation
is available. (墌 pg. 34, Spot Exposure
Control)

Data Battery

You can check the battery status by simply
pressing the BATT. DATA button. (墌 pg. 13)

BATTERY CONDITION

MAX TIMELEVEL

100

%

50

0

LCD

60

FINDER

80

min

min

SAFETY PRECAUTIONS

IMPORTANT (for owners in the U.K.)

Connection to the mains supply in the United
Kingdom.
DO NOT cut off the mains plug from this
equipment.

If the plug fitted is not suitable for the power
points in your home or the cable is too short to
reach a power point, then obtain an appropriate
safety approved extension lead or consult your
dealer.

BE SURE to replace the fuse only with an
identical approved type, as originally fitted,
and to replace the fuse cover.

If nonetheless the mains plug is cut off be sure to
remove the fuse and dispose of the plug
immediately, to avoid possible shock hazard by
inadvertent connection to the mains supply.
If this product is not supplied fitted with a mains
plug then follow the instructions given below:
DO NOT make any connection to the Larger
Terminal coded E or Green.
The wires in the mains lead are coloured in
accordance with the following code:

Blue to N (Neutral)
or Black

Brown to L (Live)
or Red

If these colours do not correspond with the
terminal identifications of your plug, connect as
follows:
Blue wire to terminal coded N (Neutral) or
coloured black.
Brown wire to terminal coded L (Live) or coloured
Red.
If in doubt — consult a competent electrician.

WARNING: TO PREVENT FIRE OR SHOCK
HAZARD, DO NOT EXPOSE THIS UNIT TO
RAIN OR MOISTURE.

CAUTIONS:

● To prevent shock, do not open the cabinet. No
user serviceable parts inside. Refer servicing to
qualified personnel.

● When you are not using the AC Adapter for a
long period of time, it is recommended that you
disconnect the power cord from AC outlet.

EN 3

CAUTION:

To avoid electric
shock or damage to
the unit, first firmly
insert the small end
of the power cord into
the AC Adapter until it
is no longer wobbly,
and then plug the
larger end of the
power cord into an
AC outlet.

CAUTIONS:

● This camcorder is designed to be used with
PAL-type colour television signals. It cannot be
used for playback with a television of a different
standard. However, live recording and LCD
monitor/viewfinder playback are possible
anywhere.

● This product includes patented and other
proprietary technology and will operate only
with JVC Data Battery. Use the JVC
BN-VF707U/VF714U/VF733U battery packs
and, to recharge them or to supply power to the
camcorder from an AC outlet, use the provided
multi-voltage AC Adapter. (An appropriate
conversion adapter may be necessary to
accommodate different designs of AC outlets in
different countries.)

Caution on Replaceable lithium battery

The battery used in this device may present a fire
or chemical burn hazard if mistreated.

Do not recharge, disassemble, heat above 100°C
or incinerate.

Replace battery with Panasonic (Matsushita
Electric), Sanyo, Sony or Maxell CR2025.

Danger of explosion or Risk of fire if the battery is
incorrectly replaced.

● Dispose of used battery promptly.

● Keep away from children.

● Do not disassemble and do not dispose of in

fire.

NOTES:

● The rating plate (serial number plate) and
safety caution are on the bottom and/or the
back of the main unit.

● The rating information and safety caution of the
AC Adapter are on its upper and lower sides.

4 EN

When the equipment is installed in a cabinet or on
a shelf, make sure that it has sufficient space on
all sides to allow for ventilation (10 cm or more on
both sides, on top and at the rear).

Do not block the ventilation holes.
(If the ventilation holes are blocked by a
newspaper, or cloth etc. the heat may not be able
to get out.)

No naked flame sources, such as lighted candles,
should be placed on the apparatus.

When discarding batteries, environmental
problems must be considered and the local rules
or laws governing the disposal of these batteries
must be followed strictly.

The apparatus shall not be exposed to dripping or
splashing.

Do not use this equipment in a bathroom or
places with water.
Also do not place any containers filled with water
or liquids (such as cosmetics or medicines, flower
vases, potted plants, cups etc.) on top of this unit.
(If water or liquid is allowed to enter this
equipment, fire or electric shock may be caused.)

Do not point the lens or the viewfinder directly into
the sun. This can cause eye injuries, as well as
lead to the malfunctioning of internal circuitry.
There is also a risk of fire or electric shock.

CAUTION!

The following notes concern possible physical
damage to the camcorder and to the user.

When carrying, be sure to always securely attach
and use the provided strap. Carrying or holding
the camcorder by the viewfinder and/or the LCD
monitor can result in dropping the unit, or in a
malfunction.

Take care not to get your finger caught in the
cassette holder cover. Do not let children operate
the camcorder, as they are particularly
susceptible to this type of injury.

Do not use a tripod on unsteady or unlevel
surfaces. It could tip over, causing serious
damage to the camcorder.

CAUTION!

Connecting cables (Audio/Video, S-Video, etc.) to
the camcorder and leaving it on top of the TV is
not recommended, as tripping on the cables will
cause the camcorder to fall, resulting in damage.

SOME DO’S AND DON’TS ON THE SAFE USE OF EQUIPMENT

This equipment has been designed and
manufactured to meet international safety
standards but, like any electrical equipment,
care must be taken if you are to obtain the
best results and safety is to be assured.

DO read the operating instructions before you

attempt to use the equipment.
DO ensure that all electrical connections (including

the mains plug, extension leads and
interconnections between pieces of equipment) are
properly made and in accordance with the
manufacturer’s instructions. Switch off and withdraw
the mains plug when making or changing
connections.

DO consult your dealer if you are ever in doubt
about the installation, operation or safety of your
equipment.

DO be careful with glass panels or doors on
equipment.

DON’T continue to operate the equipment if you are
in any doubt about it working normally, or if it is
damaged in any way — switch off, withdraw the
mains plug and consult your dealer.

DON’T remove any fixed cover as this may expose
dangerous voltages.

DON’T leave equipment switched on when it is
unattended unless it is specifically stated that it is
designed for unattended operation or has a standby
mode. Switch off using the switch on the equipment
and make sure that your family knows how to do
this. Special arrangements may need to be made
for infirm or handicapped people.

DON’T use equipment such as personal stereos or
radios so that you are distracted from the
requirements of road safety. It is illegal to watch
television whilst driving.

DON’T listen to headphones at high volume, as
such use can permanently damage your hearing.

DON’T obstruct the ventilation of the equipment, for
example with curtains or soft furnishings.
Overheating will cause damage and shorten the life
of the equipment.

DON’T use makeshift stands and NEVER fix legs
with wood screws — to ensure complete safety
always fit the manufacturer’s approved stand or legs
with the fixings provided according to the
instructions.

DON’T allow electrical equipment to be exposed to
rain or moisture.

ABOVE ALL

● NEVER let anyone especially children push
anything into holes, slots or any other opening in
the case — this could result in a fatal electrical
shock;

● NEVER guess or take chances with electrical
equipment of any kind — it is better to be safe
than sorry!

GETTING STARTED 6

Index................................................................. 6

Provided Accessories ..................................... 10

Power.............................................................. 12

Operation Mode.............................................. 14

Language Settings..........................................14

Date/Time Settings ......................................... 14

Grip Adjustment.............................................. 15

Viewfinder Adjustment.................................... 15

Brightness Adjustment Of The Display........... 15

Tripod Mounting.............................................. 16

Loading/Unloading A Cassette....................... 16

VIDEO RECORDING & PLAYBACK 17

VIDEO RECORDING ........................................... 17

Basic Recording.............................................. 17

Tape Remaining Time ................................ 17

LCD Monitor And Viewfinder ...................... 18

Zooming...................................................... 18

Journalistic Shooting .................................. 19

Self Recording............................................ 19

Time Code .................................................. 19

Quick Review.............................................. 19

Recording From The Middle Of A Tape...... 19

VIDEO PLAYBACK ............................................. 20

Normal Playback............................................. 20

Still Playback .............................................. 20

Shuttle Search............................................ 20

Blank Search .............................................. 21

Connections To A TV Or VCR........................ 21

Playback Using The Remote Control.............. 22

CONTENTS

EN

ADVANCED FEATURES 25

MENUS FOR DETAILED ADJUSTMENT.................. 25

Changing The Menu Settings......................... 25

Recording Menus............................................ 26

Playback Menus ............................................. 29

FEATURES FOR RECORDING............................... 31

5-Second Recording....................................... 31

Night-Scope.................................................... 31

Snapshot (For Video Recording).................... 32

Manual Focus ................................................. 32

Exposure Control............................................ 33

Iris Lock .......................................................... 33

Backlight Compensation................................. 34

Spot Exposure Control.................................... 34

White Balance Adjustment.............................. 35

Manual White Balance Adjustment................. 35

Wipe Or Fader Effects .................................... 36

Program AE With Special Effects ................... 37

EDITING............................................................ 38

Dubbing To A VCR ......................................... 38

Dubbing To A Video Unit Equipped With A DV

Connector (Digital Dubbing) ....................... 39

Connection To A Personal Computer............. 40

Audio Dubbing ................................................ 41

REFERENCES 42

TROUBLESHOOTING.......................................... 42

USER MAINTENANCE......................................... 46

CAUTIONS ........................................................47

SPECIFICATIONS................................................ 50

TERMS 51

5

6 EN

Index

GETTING STARTED

ZaK P

90

6

VU

54

Q

R
S

7O

W

X

Y

8

1
2

3

cb

LMN

edT

gf

Controls

a Menu Button [MENU] (墌 pg. 25)

Data Battery Button [BATT. DATA] (墌 pg. 13)

B Set Button [SET] (墌 pg. 25)
C Fast-Forward Button [

Right Button [>] (墌 pg. 25)

D Stop Button [8] (墌 pg. 20)

Backlight Compensation Button [BACK
LIGHT] (墌 pg. 34)
Down Button [ ] (墌 pg. 25)

E Rewind Button [

Quick Review Button [Q.REVIEW] (墌 pg. 19)
Left Button [<] (墌 pg. 25)

F Play/Pause Button [4/9] (墌 pg. 20)

Manual Focus Button [FOCUS] (墌 pg. 32)
Up Button [ ] (墌 pg. 25)

G Dioptre Adjustment Control (墌 pg. 15)
H Battery Release Button [BATT. RELEASE]

(墌 pg. 12)

I Snapshot Button [SNAPSHOT] (墌 pg. 32)
J Power Zoom Lever [T/W] (墌 pg. 18)

Speaker Volume Control [VOL. +, –]
(墌 pg. 20)

K Cassette Open/Eject Switch [OPEN/EJECT]

(墌 pg. 16)

L Recording Start/Stop Button (墌 pg. 17)
M Power Switch [A, M, PLAY, OFF] (墌 pg. 14)
N Lock Button (墌 pg. 14)

3

] (墌 pg. 20)

5

] (墌 pg. 20)

Connectors

The connectors are located beneath the covers.

O S-Video Input/Output Connector [S]

(墌 pg. 21, 38)

P Microphone connector [MIC] (墌 pg. 29)
Q Digital Video Connector [DV OUT] (i.Link*)

(墌 pg. 39, 40)

R Audio/Video Output Connector [AV]

(墌 pg. 21, 38)

S DC Input Connector [DC] (墌 pg. 12)

* i.Link refers to the IEEE1394-1995 industry

specification and extensions thereof. The logo
is used for products compliant with the i.Link
standard.

GETTING STARTED

Indicators

T POWER/CHARGE Lamp (墌 pg. 12, 17)

Other Parts

U LCD Monitor (墌 pg. 18, 19)
V Shoe
W Viewfinder (墌 pg. 15)
X Speaker (墌 pg. 20)
Y Battery Pack Mount (墌 pg. 13)
Z Cassette Holder Cover (墌 pg. 16)
a Lens
b Camera Sensor

(Be careful not to cover this area, a sensor

necessary for shooting is built-in here.)

c Stereo Microphone
d Shoulder Strap Eyelet (墌 pg. 10)
e Grip Strap (墌 pg. 15)
f Tripod Mounting Socket (墌 pg. 16)
g Stud Hole (墌 pg. 16)

EN 7

GETTING STARTED

8 EN

GETTING STARTED

LCD Monitor/Viewfinder Indications

During Video Recording

90

1
2

15

3
4
5
6

SOUND12BIT

7

8

a Operation Mode (墌 pg. 14)

B : Gain Up Mode (墌 pg. 26)
C White Balance Indicator (墌 pg. 35)
D : Spot Exposure Control Indicator

(墌 pg. 34)

: Backlight Compensation Indicator
(墌 pg. 34)
±: Exposure Adjustment Indicator (墌 pg. 33)

E Selected Program AE With Special Effects

Indicator (墌 pg. 37)

: Night-Scope Indicator (墌 pg. 31)

F Iris Lock Indicator (墌 pg. 33)
G SOUND 12BIT/16BIT: Sound Mode Indicator

(墌 pg. 26) (Appears for approx. 5 seconds
after turning on the camcorder.)

L
R

(Appears when an optional microphone is
connected. 墌 pg. 29, “AUDIO LEV.”)

H Digital Image Stabiliser (“DIS”) (墌 pg. 27)
I Approximate Zoom Ratio (墌 pg. 18)
J Zoom Indicator (墌 pg. 18)
K Selected Wipe/Fader Effect Indicator

(墌 pg. 36)

L Tape Running Indicator (墌 pg. 17)

(Rotates while tape is running.)

M Selected Wide Mode Indicator (墌 pg. 27)
N Recording Speed Mode (SP/LP) (墌 pg. 26)
O Tape Remaining Time (墌 pg. 17)

qwe tr

1 0 1110.:0

.

1h40m

REC

50m

0

BRIGHT

d

T

s

ap

x

W

15:55

: Auxiliary Microphone Level

Indicator

y

u

i

o

5
0

P REC: (Appears during recording.) (墌 pg. 17)

PAUSE: (Appears during Record-Standby
mode.) (墌 pg. 17)
O: (Appears when taking Snapshot.)
(墌 pg. 32)

Q 5S/Anim.: Displays the 5-Second Recording

mode or Animation recording mode.
(墌 pg. 27)

R Wind Cut Indicator (墌 pg. 27)
S Battery Remaining Power Indicator

(墌 pg. 44)

T Date/Time (墌 pg. 14)
U Brightness Control Indicator (LCD monitor/

Viewfinder) (墌 pg. 15)

V Manual Focus Adjustment Indicator

(墌 pg. 32)

W Time Code (墌 pg. 29, 30)

During Video Playback

1L2

1

BIT

2 0 :/2M

2

I

X

BLANK SEARCH

PUSH "STOP" BUTTON

TO CANCEL

U

M

E

V

O

L

1

:

2

5

87 6

a Sound Mode Indicator (墌 pg. 29)

B Blank Search Indicator (墌 pg. 21)
C Tape Speed (墌 pg. 26)
D 4: Playback

5

: Fast-Forward/Shuttle Search

3

: Rewind/Shuttle Search

9: Pause
9 U: Forward Frame-By-Frame Playback/

Slow-Motion
Y 9: Reverse Frame-By-Frame Playback/
Slow-Motion
D: Audio Dubbing
9D: Audio Dubbing Pause
(Appear while a tape is running.)

4

3

50m

1 0 1110.:0

.

5

5
0

0

E Battery Remaining Power Indicator

(墌 pg. 44)

F Date/Time (墌 pg. 29, 30)
G VOLUME: Volume Level Indicator (墌 pg. 20)

BRIGHT: Brightness Control Indicator (LCD
monitor/Viewfinder) (墌 pg. 15)

H Time Code (墌 pg. 29, 30)

Before Using This Camcorder

Make sure you only use cassettes with the Mini
DV mark .

This camcorder is designed exclusively for the
digital video cassette. Only cassettes marked
“ ” can be used with this unit.

Remember that this camcorder is not
compatible with other digital video formats.

Remember that this camcorder is intended for
private consumer use only.

Any commercial use without proper permission is
prohibited. (Even if you record an event such as a
show, performance or exhibition for personal
enjoyment, it is strongly recommended that you
obtain permission beforehand.)

Before recording important video, be sure to
make a trial recording.

Play back your trial recording to make sure the
video and audio have been recorded properly.

We recommend cleaning your video heads
before use.

If you haven’t used your camcorder for a while, the
heads may be dirty. We recommend periodically
cleaning the video heads with a cleaning cassette
(optional).

Be sure to store your cassette tapes and
camcorder in the proper environment.

Video heads can become dirty more easily if your
cassette tapes and camcorder are stored in a dusty
area. Cassette tapes should be removed from the
camcorder and stored in cassette cases. Store the
camcorder in a bag or other container.

Use SP (Standard) mode for important video
recordings.

LP (Long Play) mode lets you record 50% more
video than SP (Standard) mode, but you may
experience mosaic-like noise during playback
depending on the tape characteristics and the
usage environment.
So, for important recordings, we recommend using
SP mode.

It is recommended that you use JVC brand
cassette tapes.

Your camcorder is compatible with all brands of
commercially available cassette tapes complying
with the MiniDV standard, but JVC brand cassette
tapes are designed and optimized to maximize the
performance of your camcorder.

Also read “CAUTIONS” on pages 47 – 49.

GETTING STARTED

®

● Microsoft
trademarks or trademarks of Microsoft
Corporation in the United States and/or other
countries.

and Windows® are either registered

EN 9

GETTING STARTED

10 EN

GETTING STARTED

Provided Accessories

How To Attach The Lens Cap

To protect the lens, attach
the provided lens cap to the
camcorder as shown in the
illustration.

NOTE:

To confirm the lens cap is on
correctly make sure the cap is
flush to the camcorder.

a AC Adapter AP-V14E
b Power Cord
c Battery Pack BN-VF707U
d AV Ca ble
e Audio Extension Cable (for optional

microphone, 墌 pg. 11 for connection)

f Core Filter [small] x 2 (for Audio extension

cable 墌 pg. 11 for attachment)

g Core Filter (for AV cable 墌 pg. 11 for

attachment)

h Cable Adapter
i Remote Control Unit RM-V720U
j Lithium Battery CR2025* (for remote control

unit)

k Shoulder Strap (see the right column for

attachment)

l Lens Cap (see the right column for

attachment)

* A lithium battery is pre-installed in the Remote

Control Unit at time of shipment (with insulation
sheet). To use the Remote Control Unit, remove
the insulation sheet.

NOTES:

● In order to maintain optimum performance of the
camcorder, provided cables may be equipped with
one or more core filter. If a cable has only one core
filter, the end that is closest to the filter should be
connected to the camcorder.

● Make sure to use the provided cables for
connections. Do not use any other cables.

Place here during
shooting.

How To Attach The Shoulder Strap

Follow the illustration.

1 Thread the strap through the eyelet.
2 Fold it back and thread it through the strap

guide and the buckle.

● To adjust the length of the strap, loosen and then
tighten the strap in the buckle.

3 Slide the strap guide fully towards the eyelet.

Strap guide

Eyelet

1

Buckle

2

3

How To Use The Audio Extension Cable

When using an optional external microphone,
connect to the provided Audio extension cable
(with a core filter attached), then connect the
Audio extension cable to the camcorder. The
core filter reduces interference. (See the right
column.)

Open the

cover.

To M IC

GETTING STARTED

EN 11

How To Attach The Core Filter

Attach the core filters to the cables. The core
filter reduces interference.

1 Release the stoppers on both ends of the

core filter.

Stopper

2 Run the cable through the core filter, leaving

approx. 3 cm of cable between the cable plug
and the core filter.
Wind the cable once around the outside of the
core filter as shown in the illustration.

Core filter

3 cm

GETTING STARTED

Core filter

Stereo
microphone

Audio extension
cable (provided)

Wind once.

3 Close the core filter until it clicks shut.

NOTES:

● Take care not to damage the cable.

● When connecting a cable, attach the end with the

core filter to the camcorder.

12 EN

GETTING STARTED

Power

This camcorder’s 2-way power supply system
lets you choose the most appropriate source of
power. Do not use provided power supply units
with other equipment.

Charging The Battery Pack

BATT. RELEASE

Battery pack

Arrow

Battery pack mount

Power switch

POWER/CHARGE

lamp

Power cord

1 Set the Power Switch to “OFF”.
2 With the arrow on the battery pack pointing

right, push the battery pack slightly against the
battery pack mount a.

3 Slide the battery pack to the right until it locks

in place b.

4 Connect the AC Adapter to the camcorder.
5 Connect the Power Cord to the AC Adapter.
6 Plug the AC Adapter into an AC outlet. The

POWER/CHARGE lamp on the camcorder
blinks to indicate charging has started.

7 When the POWER/CHARGE lamp goes out,

charging is finished. Unplug the AC Adapter
from the AC outlet. Disconnect the AC Adapter
from the camcorder.

Open the cover.

To
DC connector

mark

AC Adapter

To AC outlet

To detach the battery pack

Slide the battery pack to the left while pressing
BATT. RELEASE to detach it.

Battery pack Charging time

BN-VF707U* Approx. 1 hr. 30 min.

BN-VF714U Approx. 2 hr. 40 min.

BN-VF733U Approx. 5 hr. 40 min.

* Provided

NOTES:

● This product includes patented and other
proprietary technology and will operate only
with JVC Data Battery. Use the JVC BN­VF707U/VF714U/VF733U battery packs. Using
generic non-JVC batteries can cause damage
to the internal charging circuitry.

● If the protective cap is attached to the battery
pack, remove it first.

● During charging, the camcorder cannot be
operated.

● Charging is not possible if the wrong type of
battery is used.

● When charging the battery pack for the first time
or after a long storage period, the POWER/
CHARGE lamp may not light. In this case, remove
the battery pack from the camcorder, then try
charging again.

● If the battery operation time remains extremely
short even after having been fully charged, the
battery is worn out and needs to be replaced.
Please purchase a new one.

● Since the AC Adapter processes electricity
internally, it becomes warm during use. Be sure to
use it only in well-ventilated areas.

● Using the optional AA-VF7 Battery Charger, you
can charge the BN-VF707U/VF714U/VF733U
battery pack without the camcorder.

● After 5 minutes has elapsed in Record-Standby
mode with the cassette inserted, the camcorder
will automatically turn off its power supplied from
the AC adapter. In this case, the battery charge
starts if the battery is attached to the camcorder.

Using The Battery Pack

A

Perform steps 2 – 3 in “Charging The Battery
Pack”.

Maximum continuous recording time

Battery pack

BN-VF707U* 1 hr. 5 min. 1 hr. 25 min.

BN-VF714U 2 hr. 20 min. 3 hr.

BN-VF733U 5 hr. 25 min. 7 hr. 5 min.

* Provided

LCD monitor

on

Viewfinder on

NOTES:

● Recording time is reduced significantly under the
following conditions:

• Zoom or Record-Standby mode is engaged

repeatedly.

• The LCD monitor is used repeatedly.

• The playback mode is engaged repeatedly.

● Before extended use, it is recommended that you
prepare enough battery packs to cover 3 times the
planned shooting time.

TTENTION:

Before detaching the power source, make sure that
the camcorder’s power is turned off. Failure to do so
can result in a camcorder malfunction.

Data Battery System

You can check the remaining battery power and
the recordable time.

1) Make sure the battery is attached and the

Power Switch is set to “OFF”.

2) Open the LCD monitor fully.

3) Press BATT. DATA, and the battery status

screen appears.

● It can be displayed on the viewfinder when the
LCD monitor is closed.

● It is displayed for 5 seconds if the button is
pressed and released quickly, and for 15
seconds if the button is pressed and hold for
several seconds.

● If “COMMUNICATION ERROR” appears
instead of the battery status even though you
tried to press BATT. DATA several times, there
may be a problem on the battery. In such a
case, consult your nearest JVC dealer.

GETTING STARTED

EN 13

Using AC Power

Perform steps 4 – 6 in “Charging The Battery
Pack”.

NOTE:

The provided AC Adapter features automatic
voltage selection in the AC range from 110 V to
240 V.

About Batteries

DANG ER! Do not attempt to take the batteries
apart, or expose them to flame or excessive
heat, as it may cause a fire or explosion.
WARNING! Do not allow the battery or its
terminals to come in contact with metals, as this
can result in a short circuit and possibly start a
fire.

To resume the original function of the
accurate battery power indication

If the battery power indication differs from the
actual operating time, fully charge the battery,
and then run it down. However this function may
not turn back if the battery was used for a long
period of time under extremely high/low
temperature condition or charged too many
times.

GETTING STARTED

14 EN

GETTING STARTED

Operation Mode

To turn on the camcorder, set the Power Switch
to any operation mode except “OFF” while
pressing down the Lock Button located on the
switch.

Power Switch

Lock Button

POWER/CHARGE
lamp

Choose the appropriate operation mode
according to your preference using the Power
Switch.

Power Switch Position

A (Full Auto Recording):

Allows you to record using NO special effects
or manual adjustments. Suitable for standard
recording.
The “A” indicator appears on the display.

M (Manual Recording):

Allows you to set various recording functions
using the Menus. (墌 pg. 25)
If you want more creative capabilities than Full
Auto Recording, try this mode.

OFF:
Allows you to switch off the camcorder.

PLAY:

● Allows you to play back a recording on the
tape.

● Allows you to set various playback functions
using the Menus. (墌 pg. 25)

Power-Linked Operation

When the Power Switch is set to “A” or “M”, you
can also turn on/off the camcorder by opening/
closing the LCD monitor or pulling out/pushing in
the viewfinder.

INFORMATION:

The following explanations in this manual
supposes the use of LCD monitor in your
operation. If you want to use the viewfinder,
close the LCD monitor and pull out the
viewfinder fully.

Language Settings

The language on the display can be changed.
(墌 pg. 25, 29, 30)

1 Set the Power Switch to “M” while pressing

down the Lock Button located on the switch.

2 Open the LCD monitor fully. (墌 pg. 18)
3 Press MENU. The Menu Screen appears.
4 Press or to select

“n”, and press SET. The
CAMERA DISPLAY Menu
appears.

5 Press or to select

“LANGUAGE”, and press
SET.

6 Press or to select

the desired language, and
press SET.

7 Press or to select

“BRETURN”, and press
SET twice. The Menu
Screen closes.

LANGUAGE

MET
DEM

J

NRETUR

LA DASERA CM I YP

BRIGHT

LC – T/D

NCREON S E

AU

–/TI DA E

OT

OF

– CO TI E

F

LANGUAGE ENGLISH

–

OND–OLEV.AU

2 OK CL CI 210.

1

AD .

7

LA DASERA CM I YP

–

ENGLISH
ESPAÑOL

РУССКИЙ

Date/Time Settings

The date/time is recorded onto the tape at all
times, but its display can be turned on or off
during playback. (墌 pg. 25, 30)

1 Perform steps 1 – 4 in “Language Settings”

(墌 pg. 14).

2 Press or to select “CLOCK ADJ.”, and

press SET. The parameter for “Day” is
highlighted.

I Y

D

P

ASERA CM

3 Press or to input

the day, and press SET.
Repeat to input the month,
year, hour and minute.

4 Press or to select

“BRETURN”, and press
SET twice. The Menu
Screen closes.

J

LA

2 OK CL C 210.

1

AD .

7

V

:30

. 0 5

. 0 5

:30

GETTING STARTED

PAUSE

EN 15

Grip Adjustment

1 Adjust the velcro strip.
2 Pass your right hand

through the loop and grasp
the grip.

3 Adjust your thumb and

fingers through the grip to
easily operate the
Recording Start/Stop
Button, Power Switch and
Power Zoom Lever. Be
sure to fasten the velcro strip to your preference.

Viewfinder Adjustment

1 Set the Power Switch to “A” or “M” while

pressing down the Lock Button located on the
switch.

2 Make sure the LCD monitor is closed and

locked. Pull out the viewfinder fully and adjust it
manually for best viewability.

3 Turn the Dioptre Adjustment Control until the

indications in the viewfinder are clearly focused.

Example:

Dioptre Adjustment Control

Brightness Adjustment Of The Display

1 Set the Power Switch

to “M” or “PLAY” while
pressing down the Lock
Button located on the
switch.

2 Open the LCD monitor

fully. (墌 pg. 18)

● To adjust the brightness of

the viewfinder, pull out the
viewfinder fully and set
“PRIORITY” to “FINDER”
(墌 pg. 25, 28).

3 Press MENU. The

Menu Screen appears.

4 Press or to select

“n”, and press SET. The
CAMERA DISPLAY or VIDEO DISPLAY Menu
appears.

5 Press or to select “BRIGHT”, and press

SET. The Menu Screen closes and the
brightness control indicator appears.

6 Press < or > until the appropriate brightness

is reached.

7 Press MENU to clear the brightness control

indicator from the display.

MENU

<

SET

>

BRIGHT

GETTING STARTED

CAUTION:

When retracting the viewfinder, take care not to
pinch your fingers.

16 EN

GETTING STARTED

Tripod Mounting

To attach the
camcorder to a tripod,
align the direction stud
and screw to the
mounting socket and
stud hole on the
camcorder. Then
tighten the screw
clockwise.

● Some tripods are not
equipped with studs.

Loading/Unloading A Cassette

The camcorder needs to be powered up to load
or eject a cassette.

Erase
protection tab

Make sure the window side is facing out.

Cassette holder cover

PUSH HERE

OPEN/EJECT

Cassette holder

3 Close the cassette holder cover firmly until it

locks into place.

To protect valuable recordings

Slide the erase protection tab on the back of the
tape in the direction of “SAVE”. This prevents the
tape from being recorded over. To record on this
tape, slide the tab back to “REC” before loading
it.

NOTES:

● If you wait a few seconds and the cassette holder
does not open, close the cassette holder cover
and try again. If the cassette holder still does not
open, turn the camcorder off then on again.

● If the tape does not load properly, open the
cassette holder cover fully and remove the
cassette. A few minutes later, insert it again.

● When the camcorder is suddenly moved from a
cold place to a warm environment, wait a short
time before opening the cassette holder cover.

1 Slide and hold OPEN/EJECT in the direction

of the arrow, then pull the cassette holder cover
open until it locks. The cassette holder opens
automatically.

● Do not touch internal components.

2 Insert or remove a tape and press “PUSH

HERE” to close the cassette holder.

● Be sure to press only the section labelled “PUSH
HERE” to close the cassette holder; touching
other parts may cause your finger to get caught in
the cassette holder, resulting in injury or product
damage.

● Once the cassette holder is closed, it recedes
automatically. Wait until it recedes completely
before closing the cassette holder cover.

● When the battery pack’s charge is low, you may
not be able to close the cassette holder cover. Do
not apply force. Replace the battery pack with a
fully charged one or use AC power before
continuing.