JVC GR-D370US User Manual
SOFTWARE INSTALLATION AND
USB CONNECTION GUIDE
ENGLISH
LYT1520-001A
EN
Contents
JVC SOFTWARE LICENSE AGREEMENT..
.................................................................. 3
Notice for Users............................................ 5
System Requirements ..................................6
Software Installation (Windows®).................. 7
Connecting (Windows®)................................ 8
Viewing the Contents of a Memory Card
(Windows®).............................................. 9
Copying Files to the PC (Windows®) ........... 10
Playing Back Files on the PC (Windows®)
................................................................. 10
Disconnecting the USB cable (Windows®)... 11
Connections (Macintosh)............................. 12
Viewing the Contents of a Memory Card
(Macintosh).............................................. 13
Copying Files to the PC (Macintosh) ........... 14
Playing Back Files on the PC (Macintosh)... 14
Disconnecting the USB cable (Macintosh) .. 15
User’s Guide/Help/Readme (Windows®) ..... 15
JVC SOFTWARE LICENSE AGREEMENT
IMPORTANT
TO CUSTOMERS: PLEASE MAKE SURE TO READ THIS CAREFULLY BEFORE INSTALLING OR USING THE SOFTWARE PROGRAM NAMED “DIGITAL PHOTO NAVIGATOR” (“Program”) ON YOUR PC.
The right to use the Program is granted by
Victor Company of Japan, Limited (“JVC”)
to You only on the condition that You agree
to the following.
Should You not agree to the terms here of,
You may not install or use the Program.
HOWEVER, INSTALLING OR USING THE
PROGRAM INDICATES YOUR
ACCEPTANCE OF THESE TERMS AND
CONDITIONS.
1 COPYRIGHT; OWNERSHIP
You acknowledge that all copyrights and
other intellectual property rights in the
Program are owned by JVC and its
licensor, and remain vested in JVC and
such licensor. The Program is protected
under the copyright law of Japan and
other countries, and related
Conventions.
2 GRANT OF LICENSE
(1) Subject to the conditions of this
Agreement, JVC grants to You a nonexclusive right to use the Program.
You may install and use the Program
on a HDD or other storage devices
incorporated in Your PC.
(2) You may make one (1) copy of the
Program solely for your personal
backup or archival purposes.
3 RESTRICTION ON THE
PROGRAM
(1) You may not reverse engineer,
decompile, disassemble, revise or
modify the Program, except to the
extent that expressly permitted by
applicable law.
(2) You may not copy or use the
Program, in whole or in part, other
than as expressly specified in this
Agreement.
(3) You have no right to grant a license to
use the Program, and may not
distribute, rent, lease or transfer the
Program to any third party or
otherwise let them use the Program.
4 LIMITED WARRANTY
JVC warrants that any media in which
the Program is embodied are free from
any defects in materials and
workmanship for a period of thirty (30)
days from the date of Your purchasing
any our products accompanying the
Program. JVC’s entire liability and your
exclusive remedy in connection with the
Program shall be replacement of such
defective media. EXCEPT FOR THE
EXPRESS WARRANTIES STATED
HERE IN AND TO THE EXTENT
PERMITTED BY APPLICABLE LAW,
JVC AND ITS LICENSORS DISCLAIM
ANY OTHER WARRANTIES, EITHER
EXPRESS OR IMPLIED, INCLUDING
BUT NOT LIMITED TO IMPLIED
WARRANTIES OF MERCHANTABILITY
AND FITNESS FOR A PARTICULAR
PURPOSE IN REGARD TO THE
PROGRAM AND THE
ACCOMPANYING PRINTED
MATERIALS. SHOULD THERE BE ANY
PROBLEM ARISING FROM OR
CAUSED BY THE PROGRAM, YOU
SHOULD SETTLE ALL SUCH
PROBLEM AT YOUR OWN COST AND
EXPENSE.
5 LIMITED LIABILITY
TO THE EXTENT PERMITTED BY
APPLICABLE LAW, IN NO EVENT
SHALL JVC AND ITS LICENSORS BE
LIABLE FOR ANY INDIRECT, SPECIAL,
INCIDENTAL OR CONSEQUENTIAL
DAMAGES WHATSOEVER,
REGARDLESS OF THE FORM OF
ACTION WHETHER IN CONTRACT,
TORT OR OTHERWISE ARISING OUT
OF OR IN CONNECTION WITH THE
USE OF OR INABILITY TO USE THE
PROGRAM, EVEN IF JVC HAS BEEN
ADVISED OF THE POSSIBILITY OF
SUCH DAMAGES. YOU WILL
INDEMNIFY AND HOLD HARMLESS
JVC FROM ANY LOSS, LIABILITY OR
COST ARISING OUT OF OR IN ANY
WAY CONNECTED TO CLAIMS FROM
ANY THIRD PARTY RELATING TO THE
USE OF THE PROGRAM.
—3—
CONTINUED ON NEXT PAGE
6 TERM
This Agreement will become effective on
the date when You install and use the
Program on Your machine, and continue
to be in effect until the termination under
the following provision.
Should You breach any provision of this
Agreement, JVC may terminate this
Agreement without giving any notice to
You. In this event, JVC may claim
against You for any damages caused by
Your breach. Should this Agreement be
terminated, You must immediately
destroy the Program stored in Your
machine (including the erasing from any
memory in Your PC), and no longer own
such Program.
7 EXPORT CONTROL
You agree that You will not ship, transfer
or export the Program or underlying
information and technology to any
countries to which Japan and other
relevant countries have initiated an
embargo on such goods.
8 U.S. GOVERNMENT USER
If You are an agency of the United
States of America (the “Government”),
You acknowledge JVC’s representation
that the Program is a “Commercial Item”
as defined in Federal Acquisition
Regulation (FAR) part 2.101 (g)
consisting unpublished “Commercial
Computer Software” as those items are
used at FAR part 12.212 and is only
licensed to You with the same use rights
JVC grants all commercial end users
pursuant to the terms of this Agreement.
9 GENERAL
(1) No modification, change, addition,
deletion or other alternation of or to
this Agreement will be valid unless
reduced to writing and signed by an
authorized representative of JVC.
(2) If any part of this Agreement is held
invalid by or in conflict with any law
having jurisdiction over this
Agreement, the remaining provisions
will remain in full force and effect.
(3) This Agreement shall be governed by
and interpreted under the laws of
Japan. The Tokyo District Court has
jurisdiction over all disputes which
may arise with respect to the
execution, interpretation and
performance of this Agreement.
Victor Company of Japan, Limited
NOTE:
If You acquired the Program in Germany,
the provisions of Sections 4 (Limited
Warranty) and 5 (Limited Liability) provided
above will be replaced with those of the
German version of this Agreement.
—4—
CAUTION:
● Operate this equipment according to
the operating procedures described in
this manual.
● Use only the provided CD-ROM. Never
use any other CD-ROM to run this
software.
● Do not attempt to modify this software.
● Changes or modifications not approved
by JVC could void user’s authority to
operate the equipment.
How to handle a CD-ROM
● Take care not to soil or scratch the
mirror surface (opposite to the printed
surface). Do not write anything or put a
sticker on either the front or back
surface. If the CD-ROM gets dirty,
gently wipe it with a soft cloth outward
from the center hole.
● Do not use conventional disc cleaners
or cleaning spray.
● Do not bend the CD-ROM or touch its
mirror surface.
● Do not store your CD-ROM in a dusty,
hot or humid environment. Keep it away
from direct sunlight.
You can find the latest information (in
English) on the provided software
program at our world wide web server at
http://www.jvc-victor.co.jp/english/
index-e.html
Notice for Users
Use of this software is authorized according
to the terms of the software license.
When contacting the nearest JVC office or
agency in your country about this software
(refer to the JVC Worldwide Service
Network at http://www.jvc-victor.co.jp/
english/worldmap/index-e.html), please fill
out the following and have the appropriate
information ready.
Product Name
Model
Problem
Error Message
Manufacturer
Model
CPU
PC
OS
Memory MB
Available Hard
Disk Space
Please note that it may take some time to
respond to your questions, depending on
their subject matter.
JVC cannot answer questions regarding
basic operation of your PC, or questions
regarding specifications or performance
of the OS, other applications or drivers.
□ Desktop
□ Laptop
MB
—5—
System Requirements
䡲 Windows
The following requirements must be
satisfied to connect a camcorder to a PC
and to use Digital Photo Navigator.
OS: Windows
(pre-installed), Windows
(2000) (pre-installed), Windows
Edition (XP) (pre-installed), or
Windows
installed)
CPU: Intel
200 MHz
RAM: At least 64 MB
Free hard disk space: At least 10 MB for
installation, at least 500 MB recommended
Connector: USB connector
Display: Must be capable of displaying
800 x 600 dots with 16-bit color
Miscellaneous: Internet Explorer 5.5 or
later
䡲 Macintosh
The following requirements must be
satisfied to connect a camcorder to a PC.
Hardware: iMac, iBook, Power Mac G4 or
G5, PowerBook G3 or G4, eMac, Mac Mini
equipped with a USB connector
OS: Mac OS X (10.1.5, 10.2.1 to 10.2.8,
10.3.1 to 10.3.9, 10.4.2, 10.4.3)
RAM: At least 128 MB
● The system requirements information
above is not a guarantee that the
provided software will work on all
personal computers meeting those
requirements.
● If your PC does not meet the system
requirements above, you can use the
optional USB reader/writer CU-VUSD70,
the PC card adapter CU-VPSD60 or the
floppy disk adapter CU-VFSD50 to load
the files in the memory card to the hard
disk on your PC.
(Refer to “JVC Accessories” on our world
web site at: http://www.jvc-victor.co.jp/
english/accessory/)
● Windows
trademarks or trademarks of Microsoft
®
®
Millennium Edition (Me)
®
XP Professional (XP) (pre-
®
MMXTM Pentium®, at least
®
are either registered
®
2000 Professional
®
XP Home
Corporation in the United States and/or
other countries.
● Macintosh is a registered trademark of
Apple Computer, Inc.
● Other product and company names
included in this instruction manual are
trademarks and/or registered trademarks
of their respective holders.
—6—
Software Installation
®
®
Me.
)
(Windows
Follow the procedure described below to
install the software. Quit any other software
you are using. (Check that there are no
other application icons on the status bar.)
Digital Photo Navigator 1.5
This application is used to organize still
images and convert them into a variety of
formats.
1 Load the provided CD-ROM into
the PC.
2 Follow the on screen
instructions to complete the
installation.
Following steps are the example of
Digital Photo Navigator on
Windows
[License Agreement] screen appears.
Click [Next].
[Setup Status] screen appears. Wait
for a moment until the installation is
finished.
When the installation is finished,
[Digital Photo Navigator Setup] screen
appears and asks you if you want to
create the icon on the desktop.
Click [Yes].
Then, [Choose Destination Location]
screen appears.
Click [Next].
Then, [Select Program Folder] screen
appears.
If you need it, click [Yes]. If not, click
[No].
NOTE:
If you perform installation of a software that
is already installed, uninstallation will start.
In this case, perform the installation again
after uninstallation is finished.
—7—
Connecting (Windows®)
Connecting the USB cable
Connect the USB cable to copy still image files in a memory card to the PC.
PC
To USB connector
Camcorder
USB cable
1 To assure safety, make sure all
units are turned off before
making any connections.
2 Use the USB cable to connect
the camcorder to the PC.
To USB connector
NOTES:
● It is recommended to use the AC
Adapter as the power supply instead
of the battery pack.
● When the USB cable is connected,
turning on or off the camcorder or
switching the VIDEO/MEMORY (DSC)
mode on the camcorder causes
malfunctions of the PC.
● If you connect the camcorder to the PC
through a USB hub, compatibility issues
between the hub and the PC may result in
instability in the operation of the PC. If this
happens, connect the camcorder directly
to the PC, not through the hub.
● Do not use an extension USB cable.
—8—
Viewing the Contents of a
®
®
XP:
Memory Card (Windows
1 Make sure that there is a
memory card in the camcorder.
2 Set the camcorder’s VIDEO/
MEMORY Switch to “MEMORY”.
3 Set the camcorder’s Power
Switch to “PLAY” while
pressing down the Lock Button
located on the switch.
The camcorder turns on.
4 Connect the camcorder to the
PC with a USB cable. (墌 pg. 8)
On the camcorder’s LCD monitor
[USB] appears.
5 When using Windows
The [Removable
Disk] window
appears on the
PC’s screen
after a moment.
Select [Open
folders to view
files using
Windows
Explorer] and
click [OK].
NOTE:
If the [Removable Disk] window does
not appear, confirm the connection
(墌 pg. 8) or perform the steps 1 and
2 in the right.
When using Windows®Me/2000:
1 Double-click the [My Computer] icon
on the desktop. The [Removable
Disk] icon which represents the
memory card in the camcorder
appears in the [My Computer]
window.
)
2 Double-click the [Removable Disk]
icon.
6 The folders in the memory card
appear.
Still images
Different file types are stored in
different folders.
[DCIM]: Contains folders with still
images (extension “.jpg”)
[MISC]: Contains folders with DPOF
setting data
NOTES:
● Saving the wrong kinds of files in a
memory card or deleting files or folders
from a memory card can cause problems
with the operation of the camcorder.
When it is necessary to delete a file from
a memory card, delete it through the
camcorder.
● Never disconnect the USB cable while
“ ” is displayed on the
camcorder’s LCD monitor.
● If you are using a brand new memory
card, you need to initialize the memory
card with the camcorder first. You may not
be able to copy files from the memory
card to the PC without doing so.
● The file extension may not appear
depending on the [FOLDER] option
setting of Windows
DPOF setting data
®
.
—9—
Copying Files to the PC
®
(Windows
Still image files that are stored in a memory
card can be copied to the PC and played
back on the PC.
1 Perform the procedure in
“Viewing the Contents of a
Memory Card (Windows®)”
(墌 pg. 9).
The folders in the memory card
appear.
2 Create a new folder, enter the
folder name, and then doubleclick it.
● For example, create a new folder in
the [My Pictures] folder.
3 Select the folder to be copied,
and then drag and drop that
folder in the destination folder.
)
NOTE:
Never disconnect the USB cable while
“ ” is displayed on the camcorder’s
LCD monitor.
Playing Back Files on the PC
®
(Windows
Use an application that can handle the
JPEG file format. To view a still image,
double-click the still image file (extension
“.jpg”).
)
● To copy still images: Copy the folder
within the [DCIM] folder.
“ ” appears on the LCD
monitor of the camcorder, and the
folder is copied from the memory card
to the PC.
—10—
Loading...