JVC GGT0359-001A-H User Manual

Download

WIDE LCD PANEL TV INSTRUCTIONS

ENGLISH

Contents

PREPARATION

Safety precautions ...................................2

Remote control buttons and functions ..... 3

Set up and connections ........................... 4

Initial settings ...........................................6

Registering / Editing channels ................. 7

Channel Summary ...................................8

Operating the menus ............................... 9

FUNCTIONS

Picture setting ........................................10

Sound setting......................................... 12

Useful functions ..................................... 14

Multi Media Input ................................... 16

Viewing Teletext ..................................... 19

Viewing Closed Caption ........................19

Watching Video or DVDs .......................20

LT - 42Z10

REFERENCE

Technical information ............................. 20

Troubleshooting ..................................... 22

CH/CC List ............................................. 23

Speciﬁ cation ..........................................24

GGT0359-001A-H

Safety precautions

To make sure you understand how to use your new TV, please read this manual thoroughly before you begin.

Follow this manual regarding setup!

•

Connect only to a 110-240 V, 50/60Hz AC outlet.

Make enough room for inserting and removing the power plug!

•

Place the TV as close to the outlet as possible!

•

The main power supply for this TV is controlled by inserting or removing the power plug.

Never cut or damage the power cord!

•

If the AC plug is not the right shape, or the power cord is not long enough, use an

appropriate plug adapter or extension cable. (Consult your retailer)

Unplug the power cord when going out!

•

The power buttons on the remote control and the TV unit cannot completely turn off the

TV. (Make appropriate arrangements for bedridden people.)

Do not allow the TV to fall!

•

Do not rest your elbows on, or allow children to hang from the TV. - There is a risk that the TV will fall and cause injuries.

Make use of the hole on the back of the stand to prevent the TV from falling easily.

If the TV is damaged or behaving strangely, stop using it at once!

•

Unplug the power cord and contact your retailer.

Never place anything on the TV!

•

Placing liquid, naked ﬂ ames, cloths, paper, etc. on the TV may cause a ﬁ re.

Never expose to rain or moisture!

•

To prevent ﬁ re or electric shock, never allow liquids to enter the unit.

Never insert objects into the cabinet openings!

•

It may cause a fatal electric shock.

Take care when children are near.

Hold the TV so as not to scratch the screen!

•

Do not touch the screen when carrying the TV.

Do not carry the TV on your own!

•

In order to prevent accidents, ensure that the TV is carried by

two or more people.

Never insert the power cord by wet hand!

•

It may cause a fatal electric shock.

Keep the TV set away from direct sunlight!

•

TV set can be damaged.

For more details on installation, usage and safety • Consult your retailer.

Thank you for buying this JVC LCD panel television.

Place the TV set in a neat and dry place. Do not place the product close to

•

source of steam, heat, moisture or oil. Because it may cause a ﬁ re hazard or electric shock hazard!

•

Don’t touch an external metal part of the TV set!

It may cause an electrocuted.

For keep a distance from potential ignition sources to the

•

components or part in side TV set, customer should install TV set with a stand within ± 10 perpendicularly degree. Never dismantle the rear panel!

•

It may cause an electric shock.

Never obstruct the ventilation holes!

•

It may cause overheating or a ﬁ re.

Handle LCD panel with care!

•

Use a soft, dry cloth when cleaning.

Never try repair the TV yourself!

•

If the problem cannot be solved in "Troubleshooting" unplug the power cord and contact

your retailer.

If a television is not positioned in a sufﬁ ciently stable location, it can be

•

potentially hazardous due to falling. Many injuries, particularly to children, can be avoided by talking simple precautions such as:

Using cabinets or stands recommended by the manufacturer of the television.

Only using furniture that can safely support the television.

Ensuring the television is not overhanging the edge of the supporting furniture.

Not placing the television on tall furniture (for example, cupboards or bookcases) without

anchoring both the furniture and the television to a suitable support.

Not standing the television on cloth or other materials placed between the television and supporting furniture.

Educating children about the dangers of climbing on furniture to reach the television or its controls.

To prevent accidents, ﬁ rmly attach the TV stands to the TV shelf before • using microphone. Make sure that the subwoofer is in good condition before installing it on • the TV.

If the subwoofer has leakage current, it may damage the TV or cause electric shock. -

WARNING:

To prevent the spread of ﬁ re, keep candles or other open ﬂ ames away from this product at all times.

Plane

Remote control buttons and functions

Power On / Off

RETURN

TV/VIDEO

DISPLAY BACK

RM-C2023

LCD

ZOOM

ECO

KARAOKE

VOL

MODE

Clear SD

Colour buttons

Turn on "Clear SD"

Turn on "Zoom"

Turn on "Eco Sensor"

Turn on "Karaoke"

Favourite channel setting

Display on-screen menu

Zoom : Change the aspect ratio.

Zoom

Auto Panoramic

Regular Panoramic 14:9 Zoom

16:9 Zoom

16:9 Zoom Subtitle Full

Hyper Scan :

Press and hold CH. PR changes without changing the picture screen. Once you release the button, the picture of the selected PR will appear.

Return Plus : Return to the frequently viewed channel

Return Plus Programmed by select the frequently viewed channel then press and hold

RETURN+

Return Plus Canceled by press and hold

Return : Return to the previously viewed channel.

1. Select

2. Set

Operate the menu

To previous screen

Turn on "Sound Meister"

Volume control / Turn off muting

Function for viewing Teletext and "Multi Media Input"

To Teletext

V-Scroll

16:9 Zoom

Move the picture with or while this bar is displayed.

RETURN+

Change channel / Page / Hyper Scan

Channel information

Select the input Source (P.20)

Return Plus / Return function

Change channel / Page

Turn the volume off / on

Turn on "Freeze" / Setup data

PR List Calendar

DISPLAY

PR List

02 – – – – – – 03 – – – – – – 04 – – – – – – 05 – – – – – – 06 – – – – – – 07 – – – – – – 08 – – – – – – 09 – – – – – –

Jan 2010

09 : 08

Su Mo Tu We Th Fr Sa

3456789 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31

Channel information

No Indication

•

Insert the batteries Use two "AAA/R03" dry cell batteries. Insert the batteries from the end, making sure the and polarities are correct.

"AAA/R03" Batteries

1 2

Favourite channel setting.

1. Register the favourite channel 2. Recall the favourite channel

Set 1-4 ? Favourite 1-4 ?

Press and hold Press

Programmed! will be displayed.

Press number button (1-4 only)

If the favourite channel has not been registed

•

then "No memory" will be displayed.

Press number button (1-4 only)

WARNING:

Batteries shall not be exposed to excessive heat such as direct sunshine, ﬁ re or the like.

If this symbol is shown, it is only valid in the European Union.

Set up and connections

Power lamp

ON : Lit (Blue) OFF : Unlit

Power lamp lights while the TV is on.

"Power Lamp" (P. 15)

•

Remote control sensor / Eco Sensor

Care when setting

■

Power requirements

Connect the power cord only to a • 110-240V, 50/60Hz AC outlet.

■

When attaching the TV to the wall, use the optional JVC wall mounting unit

Consult a qualiﬁ ed technician.• JVC assumes no responsibility for • damage due to improper mounting. 400 mm x 200 mm mount which • conforms to VESA standards.

■

Installation requirements

To avoid overheating, ensure the • unit has ample room.

200 mm

150 mm150 mm 50 mm 50 mm

TV/VIDEO

Select the input Source (P. 20)

MENU/OK

Display on-screen menu / set Change channel / Page /

CHANNEL

Hyper Scan Function (P. 3)

VOLUME

Volume / Adjust

Power On / Off

Microphone

If the microphone is installed,

•

should be lock it’s cable follow picture.

To prevent the TV from falling

•

thread the belt through the hole on the back of the stand and secure it to the TV rack.

Screw (not provided)

Belt (provided)

Hole for belt (under the stand)

Screw for attach the belt to the stand (provided)

Connect an aerial and VCR / DVD Player

VIDEO-2

VCR (DVD Player)

Stand Assembly

AERIAL

After all the connections have • been made, insert the plug into an AC outlet.

Change the direction of TV

Set up and connections (continued)

You can connect many different devices to the rear panel of the TV. Please read the user manuals of each device before setup. (Connecting cables are not supplied with this TV.)

Microphone

Component input

DVD Player

Game consoles

Check for PC compatibility. • "PC signals that can be displayed" (P. 21)•

VIDEO-1

Video camera

PC input line in

Composite input

Game Video

VCR

To Video-2

VIDEO-1

OUTPUT

HDMI-1

(

DVI ANALOG AUDIO

(

PC AUDIO

HDMI

Connector.

To "HDMI-1" To "HDMI-3"

DVD player (HDMI compatible)

SUBWOOFER

VIDEO-1

Pb Y

VIDEO-2

PC IN

(

D-SUB

VIDEO-1 Watching videos

Output Input

Composite signal / • Component signal (P. 24) Sound L / R•

HDMI-1 HDMI-3HDMI-2

DIGITAL VIDEO/AUDIO

Use Component signal • "Video - 1 Setting" (P. 20)

VIDEO-2 Watching videos

Output Input

Composite signal• Sound L / R•

Connecting HDMI devices

To "HDMI-2"

HD Video camera

HDMI-1 HDMI-2 HDMI-3

Subwoofer

(not provided)

(

Ampliﬁ er

(L) (R)

Output Input

HDMI signal (P. 24)•

"HDMI Setting" (P. 20)• HDMI-2 and HDMI-3 inputs do not • support analogue sound. Connect a "DVI" device to • "HDMI-1" (P. 20) Please use a High Speed HDMI• Cable. High Speed HDMI

Cables

are tested to carry an HD signal up to 1080p and higher.

OUTPUT

Subwoofer and sound signal of a TV channel you are viewing outputs from this terminal

Output

Subwoofer signal• Sound L / R•

Initial Settings

1 Turn on the TV.

JVC logo appears

Show only when powering on for the ﬁ rst time.• The power on the unit can also be used.•

2 Select a language. 3 Select Country Area.

Set Up

> Language

English

Укрaїнcькa Castellano

Français Melayu Pуccкий

Português

Tiếng Việt

1. Select

2. Set

> Country Area

Area - 1

Area - 2

Set Up

Area-1 : Asia, Middle East, Europe, Oceania, Africa Area-2 : South America, Philippines

The select the new Country Area after Initial Setting has completed.•

(While the cursor is pointing to Picture menu and hold

for 3 seconds.)

If you select Country Area to "Area-1" If you select Country Area to "Area-2"

4 Select the Teletext language group. 4 Select Air or Cable.

> Teletext Language

Group-1

Group-2 Group-3 Group-4 Group-5 Group-6

Set Up

Select

See "Language group for Teletext" (P. 21).•

5 Automatically register channels (Auto Program).

Set Up

> Auto Program

50%

CH 40

6 Check what was registered.

Set Up

> Edit

ID CH/CC

PR 01 CH 02

02 CH 03 03 CH 07 04 CH 76 05 CH 12 06 CH 09 07 CH 05 08 CH 02 09 CH 15 10 CH 28

If you want to edit channel, see • "Registering / Editing channels" (P. 7)

Set Up

> Auto Program

Air

Cable

5 Searching for the channels (Auto Program).

>> Auto Program

50%

Set Up

CH 40

6 Check what was registered.

Set Up

> Channel Summary

CH/CC ID Skip

CH 02

CH 03

CH 04 CH 05 CH 06 CH 07 CH 08 CH 09 CH 10 CH 11

1. Select

2. Set

•

If you want to set undesired channels to be skiped, see "Channel Summary" (P. 8)

1. Select

2. Set

Registering / Editing channels

This function is available when select Country Area to "Area-1" only. You can edit the channel list or register new channel manually.

Set Up

> Edit

ID CH/CC

PR 01 CH 02

02 CH 03 03 CH 07 04 CH 76 05 CH 12 06 CH 09 07 CH 05 08 CH 02 09 CH 15 10 CH 28

Move Move a channel position.

Set Up

> Edit

PR ID CH/CC 01 CH 02

02 CH 03 03 CH 07 04 CH 76 05 CH 12 06 CH 09 07 CH 05 08 CH 02 09 CH 15 10 CH 28

ID Edit a channel name

Set Up

(Red)

> Edit

ID CH/CC

01 CH 02 02 CH 03 03 A 04 ABCDEF CH 76 05 CH 12 06 CH 09 07 CH 05 08 CH 02 09 CH 15 10 CH 28

CH 07

Select a channel

1. Start

2. Move

Finish

1. Select the character

2. Move to the next column

3. Set

Insert / Delete

(Green)

Delete a channel by press

•

Manual

(Blue)

•

Channel ﬁ ne tunning

Insert / Delete a channel

Set Up

> Edit

PR ID CH/CC

01 CH 02 02 CH 03 03 04 ABCDEF CH 76 05 CH 12 06 CH 09 07 CH 05 08 CH 02 09 CH 15 10 CH 28

(Yellow)

button.

Setup

> Manual

ID CH/CC

01 CH 02 02 CH 03

03 BBCABC CH 07 (B/G)

04 ABCDEF CH 76 05 CH 12 06 CH 09 07 CH 05 08 CH 02 09 CH 15 10 CH 28

(Yellow) /(Blue)

1. Select a CH/CC

"CH/CC List" (P. 23)•

1. Beginning channel search

(Red) (Green)

From high frequencies

From low frequencies

If the picture or sound is unnatural • for select a system.

2. Enter a number 0-9 button then, receives the broadcast signal.

2. Set

Channel Summary

This function is available when select Country Area to "Area-2" only. You can edit the channel list.

> Channel Summary

CH/CC

CH 02

CH 03

CH 04 CH 05 CH 06 CH 07 CH 08 CH 09 CH 10 CH 11

Skip

Cancel

Set Up

ID Skip

Skip the channel.

(Red)

> Channel Summary

CH/CC

CH 02 Yes

CH 03 Yes

CH 04 Yes CH 05 Yes CH 06 Yes CH 07 Yes CH 08 Yes CH 09 Yes CH 10 Yes CH 11 Yes

Cancel the skip channel.

(Green)

> Channel Summary

CH/CC

CH 02

CH 03

CH 04 Yes CH 05 Yes CH 06 Yes CH 07 Yes CH 08 Yes CH 09 Yes CH 10 Yes CH 11 Yes

Select a channel

Set Up

ID Skip

Set Up

ID Skip

Edit a channel name.

(Yellow)

> Channel Summary

CH/CC ID Skip

CH 02

CH 03

CH 04 CH 05 CH 06 CH 07 CH 08 CH 09 CH 10 CH 11

Channels are to be skipped cannot be selected by the • CHANNEL -/+ button. The skip can be set to all channels of Air (CH02 - CH69) • and Cable (CC01 - CC125)

Set Up

_ _ _ _ _ _

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

1. Select the character

2. Move to the next column

Yes Yes Yes Yes Yes Yes Yes Yes

3. Set

Operating the menus

You can select the Country Area between Area-1 and Area-2. See in item 3 of "Initial setting" (P. 6) See the menus location in the below table.

Set Country Area to "Area-1"

Top Menu 2nd Menu Page

Picture Picture Mode 10

Sound

Features On Timer 14

Set Up Auto Program 6

Backlight 10 Contrast 10 Brightness 10 Sharpness 10 Colour 10 Tint 10 White Balance 10 Features 11 Stereo / I▪II

-Sound Meister 12 Treble 12 Bass 12 Surround 12 Balance 12 Voice Enhancer 12 AI Volume 12 Subwoofer Out 13 Subwoofer Level 13 Karaoke 13

Sleep Timer 14 Calendar 14 Channel Guard 14 Blue Back 15 Child Lock 15 Auto Shutoff 15 Favorite Setting 15 Power Lamp 15 Eco Sensor 15

Edit / Manual 7

-Language 6 Video-1 Setting 20 Rocket Start 15 Teletext Language 6 HDMI Setting 20 PC Setting 20

Top Menu 2nd Menu Page

Picture Picture Mode 10

Sound

Features On Timer 14

Set Up Auto Program 6

Set Country Area to "Area-2"

Backlight 10 Picture 10 Brightness 10 Detail 10 Color 10 Tint 10 White Balance 10 Features 11

MTS 12 Sound Meister 12 Treble 12 Bass 12 Surround 12 Balance 12 Voice Enhancer 12 AI Volume 12 Subwoofer Out 13 Subwoofer Level 13 Karaoke 13

Sleep Timer 14 Calendar 14 Channel Guard 14 Blue Back 15 Child Lock 15 Auto Shutoff 15 Favorite Setting 15 Power Lamp 15 Eco Sensor 15

-Channel Summary 7 Language 6 Video-1 Setting 20 Rocket Start 15

-HDMI Setting 20 PC Setting 20 Closed Caption 19

Picture setting

1. Display "Picture" menu 2. Select item and setting or adjust To enter an items menu•

Picture Mode

Backlight

Contrast

Brightness

Sharpness

Colour

Tint

White Balance

Picture

Picture Mode Bright Backlight Contrast Brightness Sharpness Colour Tint White Balance Warm Features

Enter

Picture Picture ModeeBright

Backlight Contrast Brightness Sharpness Colour Tint White Balance Warm Features

You can select a preset picture setting according to your favour.

Bright : Hightens contrast and sharpness. Game Mode : Adjust sharpness of the picture when play the game. Soft : Softens contrast and sharpness. Standard : Standardize picture adjustment.

You can change the backlight brightness.

Darker ↔ Brighter

You can change the contrast of the picture.

Lower ↔ Higher

You can change the brightness of the picture.

Darker ↔ Brighter

You can change the sharpness of the picture.

Softer ↔ Sharper

You can change the colour of the picture.

Lighter ↔ Deeper

You can change tint only in NTSC.

Reddish ↔ Greenish

You can change the white balance of the picture to better match the type of video being view.

Mid : Normal white colour. Cool : Bluish white colour. Warm : Reddish white colour.

1. Select

2. Adjust

3. Finish

1. Select

2. Enter

Picture setting (continued)

Finer Picture adjustment

Picture > Features Clear SD

Digital VNR DigiPure Off Pull Down Off Colour Management Off Picture Management Off Smart Picture Off Dynamic Backlight Off MPEG Noise Reduction Colour System Zoom

Off

f f

Features

Clear SD

Digital VNR Reduce the amount of noise in original picture. (Off / On) :

DigiPure For natural - looking outlines (Off / On) :

Pull Down For smooth cinema ﬁ lm (Auto / Off / On) :

Colour Management For natural - looking pictures (Off / On) :

Picture Management Fix bright / dark pictures. (Off / On) :

Smart Picture Make it easier to view white areas (Off / On) :

Dynamic Backlight Reduce the brightness of the backlight when the screen is dark. (Off / On) :

MPEG Noise Reduction

Colour System

Zoom Change the aspect ratio. :

Picture >> Zoom Auto

Regular Panoramic 14 : 9 Zoom 16 : 9 Zoom 16 : 9 Zoom Subtitle Full

Panoramic

For clearly picture (Off / Mode-1 / Mode-2) : When Clear SD set to Mode-1 or Mode-2, then Digital VNR, DigiPure, Picture Management and MPEG Noise Reduction cannot operate.

Reduce MPEG video noise. (Off / On) : When there is no colour, change the colour system.

( Area-1 : PAL / SECAM / NTSC 3.58 / NTSC 4.43 / Auto, Area-2 : PAL-M / PAL-N / NTSC / Auto )

Panoramic

16 : 9

Regular/Slim

4 : 3

14:9 Zoom

14 : 9

When 720p or 1080i or 1080p signal is • received, "Full", "Slim" and "Panoramic Zoom" can be selected. In PC mode, "Regular" and "Full" can be • selected.

Sound setting

1. Display "Sound" menu. 2. Select item and setting or adjust.

• Set Country Area to "Area-2"•

Set Country Area to "Area-1"

Sound

Stereo / I▪II Sound Meister Dynamic

Treble Bass

Surround Balance Voice Enhancer Off AI Volume On Subwoofer Out Off Subwoofer Level Karaoke

O Mono

Enter

Sound

Stereo / I▪II

Sound Meister

Treble Bass

Surround Balance Voice Enhancer Off AI Volume On Subwoofer Out Off Subwoofer Level Karaoke

Dynamic

I II Mono

Sound

MTS Stereo SAP Mono

On Air Sound Meister Dynamic

Treble Bass

Surround Balance Voice Enhancer Off AI Volume On Subwoofer Out Off Subwoofer Level Karaoke

1. Select

2. Adjust

Stereo/I■II

MTS

Select the broadcast sound stereo, mono or bilingual language. ( : Mono / : Stereo / I : SUB1 / II : SUB2 / Mono)

Select the stereo and SAP broadcasted programs. (Stereo : Stereo sound / SAP : Second Audio Programs / Mono : mono sound)

Sound Meister Ambience (Off / Dynamic / Pure / Living)

Treble Compensates high frequencies to widen the frequency band. (Weaker ↔ Stronger)

Bass Compensates low frequencies to widen the frequency band. (Weaker ↔ Stronger)

Surround Expands the stereo sound naturally. (Narrow ↔ Wide)

Balance Speaker balance (Left Stronger ↔ Right Stronger)

Voice Enhancer Sound enhancement technology. (Off / On)

Al Volume Prevent sudden increase or decrease of sound when changing channels. (Off / On)

Sound setting (continued)

Subwoofer Out

Subwoofer Level

Karaoke

Chooses to connect subwoofer. (Off / On)

Subwoofer to be used must have a built-in ampliﬁ er.•

Adjusts sound level of your subwoofer. (Lower ↔ Louder)

When Subwoofer Out set to On, you can adjust Subwoofer Level.

•

You can enjoy to reduce the vocals for your own karaoke.

KARAOKE

Karaoke

Main Volume Microphone Volume

Off

Karaoke Chooses to reduce the vocals.

Off : Normal sound of song

Mode-1 : Only sound of music

Mode-2 : To sing, accompanying with sound of song.

•

Karaoke function works only for stereo sound system. If using Karaoke disc, users must choose to remove the vocals from the player.•

Main Volume Adjusts volume level. (Lower ↔ Louder) Microphone Volume Adjusts volume level of microphone. (Lower ↔ Louder)

•

Microphone Volume is available when plug in microphone. Microphone to be used with the "• Karaoke" function of JVC must be of "HIGH GRADE LOW NOISE MICROPHONE

CABLE" type; otherwise, noise will result.

Useful functions

1. Display "Features" menu.

Features

On Timer

TV to turn on automatically from standby mode at a set channel and time.

Sleep Timer

TV to turn off automatically to standby mode after a set time.

Calendar

Watch calendar, date and time on screen LCD TV.

Channel Guard

Stop children from watching speciﬁ c channels.

On Timer Sleep Timer Calendar Channel Guard Blue Back Off Child Lock Off Auto Shutoff Off Favourite Setting Power Lamp On Eco Sensor On

1. Select PR channel that you want to watch. 2. Set the On time to your desired period at time.

1. Select "Calendar" to On.

1. Select "Channel Guard".

• To enter an items menu

1. Select

2. Enter

3. Set

2. Select item

f f f

Features

> On Timer PR

On Timer

e01f

Note : Press

Features

> Sleep Timer

Off

Enter

00 : 00

(Blue)

for reset time setting.

1200

Select PR channel

1. Select a time in minutes

2. Set

2. Select item and setting or adjust.

Features On Timer

Sleep Timer Calendar Channel Guard Blue Back Off Child Lock Off Auto Shutoff Off Favourite Setting Power Lamp On Eco Sensor On

f f f

1. Select "On Timer"

1. Select

2. Adjust

3. Finish

Note : When the remaining elapse is one minute,

"Good Night!" appears on the screen.

2. Set "Time" and "Date". 3. Set "Position" for adjust screen position.

> Calendar Calendar

Date / Time Position

Features

eOnf

f f

Features

>> Date / Time Time

Date 18/08/10

8:08

Note : After unplugging the TV,

this function will be reset.

View a locked channel by use the numerical buttons to enter the channel number. When

• appears, press "DISPLAY"

> Set ID No.

Features

0 0 0 0

1. Select a number

2. To the next column

3. Enter

1. Select item

2. Set

2. Select a channel and lock it (

Features

>> Channel Guard

PR ID CH/CC 01

SAT CH 02

02 GAME CH 03 03 BCC CH 07 04 IEEE CH 76 05 APL CH 12 06 DANY CH 09 07 CH 05 08 CH 02 09 CH 15 10 CH 28

Jan 2010

09 : 12

Su Mo Tu We Th Fr Sa

567891011

12 13 14 15 16 17 18

19 20 21 22 23 24 25

26 27 28 29 30 31

: locked ).

1. Select a channel

1. Adjust

2. Set

Lock / Release

(Blue)

button and enter your "ID No."

Useful functions (continued)

Blue Back Display a blue screen and mute the sound when the signal is weak or absent. (Off / On)

Child Lock Disables the side control buttons of the TV. (Off / On)

Auto Shutoff Set the power to turn off if no signal is received and no operation is performed for about 15 minute. (Off / On)

Favourite Setting

Power Lamp Power lamp lights while the TV is on. (Off / On) (P. 4)

Eco Sensor

Delete the favourite channel that you registered.

1. Select

(Blue)

To Delete

Features

> Favourite Setting

PR 01

PR 02

Features

> Favourite Setting

PR 32

PR 05 PR 07 PR 09

Automatically adjusts the picture contrast according to the brightness of your room to reduce power consumption.

Off : Deactivates the function On : Activates the function. Demo : Display the effect of the "Eco Sensor" on the screen. MAX-Eco : Only sound is available, no picture (this is to save energy in such situation as when you want to listen to the

news while doing other house works at the same time).

After choosing Eco Sensor as Max-Eco, picture will go off in 3 seconds.

When you want the picture to appear again, press any button on the remote control then function will be - reset back to "Off". After unplugging the TV or press "Power off" button, this function will be reset back to "Off" -

Freeze

"Set up" Menu

Rocket Start

Take snapshots of the screen.

Freeze

still picture

■ Cancel

Press "OK " again, or change the channel.

You cannot save or export the snapshot.• Freeze function is not available for HDMI, PC • and Component signal.

TV can turn on quickly. ( Off / On ) When Rocket Start is On, power consumption at standby mode will more than normal standby mode.

Multi Media Input

Allows you to enjoy pictures, musics, movies and text ﬁ les stored on your USB device or SD card you have connected to the terminal of the TV.

Cautions

Insert or remove SD cards and USB devices gently and in the right direction.

Otherwise, the devices or the TV may be damaged.

It is recommended to keep a backup of your ﬁ les. Do not connect a mouse, keyboard or the like. - Do not use a USB hub or extension cable. -

1 Insert an SD card / USB device into the SD card slot / USB terminal

on the side of the TV.

TV will auto detect and display signals in accordance with Article 3

automatically.

Side Panel

SD card

USB device

Slide the SD card into the slot until it clicks into place. - To remove the SD card, push it in until it clicks and then pull it out -

2 When you change the channel to see other signals. You want to view

ﬁ les from USB or SD card again, you have to set the input to "1 SD /

USB".

TV/VIDEO

AV Select

011

1 SD / USB

2 HDMI I 1 3 HDMI I 2 4 HDMI I 3 5 Video - 1 6 Video - 2 7PC

1. Select

2. Set

3 Select "SD/MMC" or "USB"

Home

SD/MMC USB SETTINGS

If you want to setting, select "SETTINGS"

Slideshow duration Select how long each picture is displayed for

Slideshow mode Select the format for displaying pictures in

Music repeat mode Select Repeat to play musics. (Repeat All /

Movie repeat mode Select Repeat to play movies. (Repeat All /

Default Return to the default.

The icon device in Home menu will be displayed according to the device you have connected (SD/MMC or USB).

1. Select

2. Set

during slide shows. (3S / 5S / 15S / 1mins / 15mins / 1hour )

slide show mode. (off / Bottom To Top / Top To Bottom / Left To Right / Right To Left / Door Close / Door Open / Hori Cross / Verti Cross / Random / Fading)

Repeat One)

Multi Media Input (continued)

SELECT MEDIA

PHOTO MUSIC MOVIE TEXT FILE

PHOTO View picture from your USB device or SD card. MUSIC Listen music from your USB device or SD card. MOVIE Watch movie from your USB device or SD card. TEXT View (*.txt) ﬁ le from your USB device or SD card. FILE Copy or delete your ﬁ les in USB device or SD card.

SD card and USB can support ﬁ les as

PHOTO : JPEG, PNG, BMP, GIF MUSIC : MP3, WMA, WAV MOVIE : MPEG1, MPEG2, MPEG4, RMVB TEXT : Text

MOVIE ﬁ le ; Supported up to 720 x 576 x 24 or 800 x 600 x 30

compressed video resolution (SD mode)

Buttons for Multi Media

Select audio language in MOVIE

Play music while viewing PHOTO

Rewind Stop

Play / Pause Zoom

Forward

Rotate photo 90º

5.1

PHOTO

C:/

228086.jpg

1. Select

2. Set

Select previous / next chapter

Menu bar to control playback.

Some ﬁ les may be displayed with bands around the edges. To see the next / previous ﬁ le, press - / .

To exit the full-screen display and show the folder index, press - . The thumbnails of some ﬁ les may not be shown. - This TV can only display ﬁ le names as alphabetical letters. - Photographs with large ﬁ le-sizes may take a while to be displayed. - This TV can not play some ﬁ les. Including ﬁ les that are changed - on the PC, even a ﬁ le format is compatible. Depending on the speciﬁ cations of the ﬁ le. To listen to music during a slideshow, press - . (Music ﬁ le must exist in your USB or SD card) If the image displayed within more than one full screen. Arrows are - shown at the bottom of the screen to choose to display the next / previous screen.

Press

- to display the control operation bar, select left or right

button for choose operations, then press

5.2 MUSIC

MUSIC

D:/VIDEO_TS/

I love you.wma

Miss you.wav

Lot of love.mp3

Title : Artist : Album : Year :

0322

Once the music is selected, It will be run automatically. The detail of - that song will be shown inside the frame on the right. After ﬁ nish that song, the next will be played accordingly. To play or pause the song, just press - or . To control the sound volume, just use VOL +/- button or press

- to

silent mode.

Press

- or to stop the music.

To show the ﬁ les in a folder, press - on the folder.

Select a photograph to display, and press or . The selected photograph is displayed full-screen.

Multi Media Input (continued)

5.3 MOVIE

- to display the control operation bar, select left or right

5.4 TEXT

- on the folder.

- or button to exit from the Text which being run and

5.5 FILE

- on the folder.

MOVIE

D:/VIDEO_TS/

Abc File name : Abc

Xyz File size : 229MB

Pop File type : Div

When the movie ﬁ le is selected the highlight bar, the detail of that movie will be shown inside the frame on the right. To play or pause the movie, press - or . To control the sound volume, use the VOL +/- button or press - to silent mode. Press - to enlarge the picture with double, 4 times, 8 times and 16 times. Press - to select audio language (if your ﬁ le have many audio languages)

Press button for choose operations, then press

TEXT

D:/

DCIM File name : DCIM

JVC demo File type : Folder

New Folder (2)

To show the ﬁ le in a folder, press Use Up / Down button to move the highlight bar to the ﬁ le to be - opened, then, press to open.

Press back to the Text list.

FILE

D:/

DCIM File name : DCIM

JVC demo File type : Folder

New Folder (2)

To show the ﬁ le in a folder, press Use Up / Down button to move the highlight bar. - Press right arrow button or - , you can enter into the ﬁ le you chose. Press the left arrow button, you can exit and back to previous - status.

Copy (ﬁ le)

1. Move the highlight bar to the ﬁ le that you want to copy.

2. Press right arrow button, then a remark will be showed on the right of the ﬁ le you selected.

FILE

D:/VIDEO_TS/

I love you.wma

3. To make another copy, just repeat the step of No.2.

4. After ﬁ le is selected, press

Then, indication of [Copy] and

[Delete] to be seen.

FILE

D:/VIDEO_TS/

I love you.wma

Copy >

Delete >

5. Select [Copy] then press , you will enter to the next stage. Select the drive C: or D: that you want to copy the ﬁ les stored. Press right arrow button for copy selection to inside folder.

Copy >

C: JOHN / NEW / DP D: MARY

6. After selection, press

to start

the process when ﬁ nished press

again.

Delete (ﬁ le)

1. Move the highlight bar to the ﬁ le you want to delete.

2. Press right arrow button, then a remark will be showed on the right of the ﬁ le you selected.

FILE

D:/VIDEO_TS/

I love you.wma

3. To make another delete, just repeat the step of No.2.

4. After ﬁ le is selected, press

Then, indication of [Copy] and

[Delete] to be seen.

5. Select [Delete] then press

you will enter to the next stage.

Delete >

6. Select [ √ ] to Delete. (If you want to cancel delete select [ X ] )

7. Press

when ﬁ nished press again, The ﬁ le that you delete is disappear.

About SD cards and USB devices.

When using miniSD cards or

microSD cards, put them in an appropriate adapter before inserting them into the TV. Not all SD cards or USB devices - are guaranteed to work on this TV.

Viewing Teletext Viewing Closed Caption

This function is available when select Country Area to "Area-1" only. This TV can display TV broadcasts and Teletext on the same channel in two windows.

Select a Teletext page by press number button (0-9).

• Move up or down a page by

When watching TV TV TEXT TEXT

TEXT--TEXT---

1. Select "Set Up".

Auto Program Channel Summary Language Video-1 Setting Rocket Sart HDMI Setting PC Setting Closed Caption

Set Up

f f f

Component

Enter

Bookmark your favourite page.

MODE

(Red) (Green) (Yellow) (Blue)

to bookmark

List Mode

Press number button for enter the number of page.

Recall your favourite page by press the colour button.

•

Hold

Reveal

Hold the current page.

Cancel by press this button again.•

Display hidden information.

Example : answer to a quiz, etc.•

Size Double the size of the displayed text.

Index

Returns to page "100" or a previously designated page.

Leave the current page open, while you

Cancel

switch to watch TV.

Useful when running a page search.•

Sub-page

Display the number of Sub-page.

Cancel by press this button again.•

Save

2. Select "Closed Caption"

Auto Program Channel Summary Language Video-1 Setting Rocket Sart HDMI Setting PC Setting

Closed Caption

Set Up

f f f

Component

f f

1. Select

2. Enter

3. Select the desired caption or text channel.

Set Up

> Closed Caption

Closed Caption Off

Caption

Text T1

CC1

Closed Caption : Select to view close caption or text information.

(Off / CC / Text)

Caption : Select the desired caption.

(CC1 / CC2 / CC3 / CC4)

Text : Select the desired text channel.

(T1 / T2 / T3 / T4)

1. Select item

2. Setting

3. Set

Watching Video or DVDs

Select the input Source.

TV/VIDEO

•

Operate the connected device and play video.

AV Select

011

1 SD / USB 2 HDMI I 1 3 HDMI I 2 4 HDMI I 3 5 Video - 1 6 Video - 2 7PC

1. Select "Set Up".

2. Select item.

Set Up Auto Program

Edit / Manual Language Video-1 Setting Rocket Sart Teletext Language HDMI Setting PC Setting

Video - 1 Setting

> HDMI Setting

HDMI-1

HDMI-2

HDMI-3

> PC Setting PC Position

Phase Pixel

f f

Component

f f

HDMI Setting Setting for HDMI input

Set Up

Size

Aduio Mode 1

Size Auto Mode 1

Auto

Digital

PC Setting

Set Up

Auto Program Edit / Manual Language Video-1 Setting Rocket Sart Teletext Language HDMI Setting PC Setting

f f f

f f

Component

1. Select item

2. Setting or Adjust

3. Set

Switch between video and component signal. (Video / Component)

Size

Audio

Normally set to "Auto." If wrong : screen size appears in 480p (525p), change to "1" or "2".

Normally set to "Auto." If no sound, : change to "Analogue" or "Digital.

Mode

Setting for PC input

If no picture, change to "1" or "2". :

1. Select PC Position

2. Enter

1. Select

2. Set

Enter

1. Adjust

2. Set

Technical information

Connect "DVI" devices

Connect a "DVI" device to "HDMI" using "DVI-HDMI" conversion cable. Connect analogue sound output of the DVI device to L and R terminals in HDMI-1.

Set "Audio" in "HDMI Setting" to "Analogue" or "Auto".• HDMI-2 and HDMI-3 input does not support analogue sound (IN HDMI-1).

•

HDMI-2 and HDMI-3 input does not support DVI devices.•

What is "Full Native" ?

With the full HD LCD display and "Full Native", you can enjoy full native • HD resolution of 1920 x 1080. It exposes ﬂ aws in the video that were hidden when viewing on "Full".

Full Full Native

The illustrations are emphasised to make clear differences between

•

"Full" and "Full Native". Dark bar or noise may appear at the edges of the screen when viewing • in "Full native" for some videos. This is resulted from the signal itself, not due to TV malfunction.

PC Position : Adjust screen position. Phase : Sets the focus of screen. Pixel : Adjusts the horizontal feature of screen.

Technical information (continued)

Language group for Teletext

Group Languages

Group-1 Turkish, Hungarian, English, German, French, Italian, Spanish,

Group-2 Polish, Serbian, Croatian, Slovenian, Czech, Slovak, Rumanian,

Group-3 Russian, Bulgarian, Lettish, Lithuanian, Estonian, Ukrainian, Serbian,

Group-4 Arabic, Czech, Slovak, Hungarian, English, German, French, Italian,

Group-5 Farsi, English, French, Turkish Group-6 Lettish, Lithuanian, Estonian, Ukrainian, Czech, Slovak, English,

Portuguese, Greek, Swedish, Finnish

Hungarian, German, French, Italian, Swedish, Finnish

Croatian, Slovenian, Czech, Slovak, English, German

Spanish, Portuguese, Swedish, Finnish

German, Serbian, Croatian, Slovenian

If the characters are unreadable. • Select different Teletext language group. (P. 6)

Sound and Colour system in your country or region

Area Country or Region System System

Bahrain, Kuwait, Oman, Qatar, United Arab Emirates,

Yemen, Indonesia, Malaysia, Singapore, Thailand, Asia, Middle East

Europe

Oceania Australia, New Zealand, etc. B/G PAL

Africa

South America

India, etc.

China, Vietnam, etc. D/K

Hong Kong, etc. I

Islamic Republic of Iran, Lebanon, Saudi Arabia, etc. B/G SECAM

Philippines, Taiwan, Myanmar, etc. M NTSC

Russia, etc.

Czech Republic, Poland, etc.

UK, etc. I

Republic of South Africa, etc. I

Nigeria, etc.

Egypt, Morocco, etc. SECAM

Agentina, Paraguay, Uruguay N

Brazil M

Chile, Peru, Bolivia, Colombia, Venezuela, Ecuador,

etc.

B/G

PAL

SECAM

D/K

PALGermany, Holland, Belgium, etc. B/G

PAL

B/G

PAL

M NTSC

PC Signals that can be displayed

If the signal doesn’t appear, check that the vertical frequency on the PC

•

is set to "60Hz".

Resolution 640 x 480(VGA) / 1024 x 768(XGA)

Vertical frequency (Hz) 60.0

What is "Clear SD"

LCD picture is unstable due to a large number of signal noise. Such noise appears extensively especially when an LCD displays SD signals. Clear SD mode resolves disadvantage for better picture quality.

Use "Clear SD"No use "Clear SD"

What is "Eco Sensor"?

You can adjust this TV so that the screen automatically adjusts to the optimum contrast of light and dark according to the brightness of your room. This function reduces eyestrain and the power consumption of this TV.

Set "Eco Sensor" (P. 15)• Make sure not to block the Eco Sensor on front of the TV (P. 4)• To fully reduce eyestrain and the power consumption of this TV. Set to • the following functions. Eco Sensor : On or Demo (P. 15) Smart Picture : On (P. 11)

■

Using "Demo" in "Eco Sensor", you can display the effect of the "Eco Sensor" on the screen.

Eco Sensor

Dark

Light

Troubleshooting

If a problem occurs when you are using the TV, check the below troubleshooting guide before calling for repair.

Severe noise or snow Page

Check the aerial cable and TV connections . Check the direction of the aerial. Check the aerial or its cable damaged or not.

Patterns, stripes or noise

Interference caused by devices such as an ampliﬁ er, personal computer, or a hair drier, Move it away from TV.

Ghosting (Doubling of images)

Interference occurs caused by signal reﬂ ection from mountains or building. Try to adjust the aerial’s direction or use another antenna.

Cannot turn it on

Ensure the power cord is connected to the AC outlet correctly. --

Cannot operate the remote control.

The batteries may be exhausted. Replace with new batteries. Ensure that you are operation the remote control at less than 7 meters from the front of your TV.

Remote control stops working

Unplug TV, several minutes later plug it in again. --

Side control buttons do not work

Switch "Child Lock" to "Off". P. 15

Aspect ratio changed unintentionally

ZOOM

Press "

PC screen alignment is off

Adjust the "PC Position" in "PC Setting" of Set Up menu. P. 20

Blue screen appears on the screen

Switch "Blue Back" to "Off". P. 15

Strange picture when using an external device

If the top of the image is distorted, check the video signal quality itself. If movement appears unnatural when receiving a signal from a DVD player, etc. with 625p (progressive-scanning), change the output setting of the external device to 625i (interlace-scanning).

Icon does not appear on the screen when plug USB or SD card into the TV.

Make sure the USB or SD card inserted engaged. Set input signal (See page 16 Article 2) USB or SD card may be damaged.

" button to return to your settings.

P. 4 P. 4

P. 11

Poor picture quality Page

Unnatural colour >> Adjust "Colour" and "Backlight" P. 10 Check "Colour System". If "Auto" is selected P. 11 select the speciﬁ c colour system manually. Noise >> Set to the following functions. Picture Mode : Standard P. 10 DigiPure : On P. 11 Dull picture >> Set to the following functions. Picture Mode : Bright P. 10 DigiPure : On P. 11

Poor sound

Adjust the "Bass" and "Treble". If receiving a poor signal in "Stereo/I Adjust the channel reception using "Manual".

For HDMI signal, wrong screen size in 480p (525p).

Switch "Size" in "HDMI Setting" to "1" or "2". P. 20

For HDMI signal, green and distorted screen

Wait a little for the signal to stabilize when switching the signal format for an "HDMI" device.

For HDMI signal, No picture / No sound

Use the cable marked with HDMI logo. Check if the device is compliant with HDMI. Switch "Audio" in "HDMI Setting" to "Digital" or "Auto" for HDMI devices, or "Analogue" or "Auto" for DVI devices.

Some functions do not work.

It is not a malfunction. Some functions (dark background) in the menu do not work depending on the situation.

Black or white dots appear on the screen.

LCD panels use ﬁ ne dots ("pixels") to display images. While more than

99.99% of these pixels function properly, a very small number of pixels may not light, or may light all the time. It is not a malfunction.

No picture, No sound

Some input do not output from OUT terminal. --

Subwoofer, No sound

May be signal source is not low frequency bass signal. Check subwoofer cable connected correctly.

Feedback sound symptoms

Keep the microphone away from the TV’s speakers. --

Echo

Lower the sound level in "Microphone Volume" in order to prevent the echo.

■

II" switch to "Mono".

P. 12 P. 12

P. 7

P. 5

P. 20

CH / CC List

To use the Insert function (P. 7), ﬁ nd the "CH/CC" number corresponding to the TV’s channel number from this table. US: The US channel numbers are the channel numbers used in the United States, Philippines, etc. CCIR: The CCIR channel numbers are the channel numbers used in the Middle East, Southeast Asia, etc. OIRT: The OIRT channel numbers are the channel numbers used in Eastern Europe, Russia, Vietnam, etc. AUSTRALIA: The AUSTRALIA channel numbers are the channel numbers used in Australia, etc.

CH 02 US-02 E2 R1 AU-0 CH 03 US-03 E3 AU-1 CH 04 US-04 E4 R2 AU-2 CH 05 US-05 E5 R6 AU-6 CH 06 US-06 E6 R7 AU-7 CH 07 US-07 E7 R8 AU-8 CH 08 US-08 E8 R9 AU-9 CH 09 US-09 E9 CH 10 US-10 E10 R10 AU-10 CH 11 US-11 E11 R11 AU-11 CH 12 US-12 E12 R12 CH 13 US-13 CH 14 US-14, W+29 CH 15 US-15, W+30 CH 16 US-16, W+31 CH 17 US-17, W+32 CH 18 US-18, W+33 CH 19 US-19, W+34 CH 20 US-20, W+35 CH 21 US-21, W+36 E21 CH 22 US-22, W+37 E22 CH 23 US-23, W+38 E23 CH 24 US-24, W+39 E24 CH 25 US-25, W+40 E25 CH 26 US-26, W+41 E26 CH 27 US-27, W+42 E27 CH 28 US-28, W+43 E28 CH 29 US-29, W+44 E29 CH 30 US-30, W+45 E30 CH 31 US-31, W+46 E31 CH 32 US-32, W+47 E32 CH 33 US-33, W+48 E33 CH 34 US-34, W+49 E34 CH 35 US-35, W+50 E35 CH 36 US-36, W+51 E36 CH 37 US-37, W+52 E37 CH 38 US-38, W+53 E38 CH 39 US-39, W+54 E39 CH 40 US-40, W+55 E40 CH 41 US-41, W+56 E41 CH 42 US-42, W+57 E42 CH 43 US-43, W+58 E43 CH 44 US-44, W+59 E44 CH 45 US-45, W+60 E45 CH 46 US-46, W+61 E46 CH 47 US-47, W+62 E47

US CCIR OIRT AUSTRALIA

Channel

CH 48 US-48, W+63 E48 CH 49 US-49, W+64 E49 CH 50 US-50, W+65 E50 CH 51 US-51, W+66 E51 CH 52 US-52, W+67 E52 CH 53 US-53, W+68 E53 CH 54 US-54, W+69 E54 CH 55 US-55, W+70 E55 CH 56 US-56, W+71 E56 CH 57 US-57, W+72 E57 CH 58 US-58, W+73 E58 CH 59 US-59, W+74 E59 CH 60 US-60, W+75 E60 CH 61 US-61, W+76 E61 CH 62 US-62, W+77 E62 CH 63 US-63, W+78 E63 CH 64 US-64, W+79 E64 CH 65 US-65, W+80 E65 CH 66 US-66, W+81 E66 CH 67 US-67, W+82 E67 CH 68 US-68, W+83 E68 CH 69 US-69, W+84 E69

CC 01 S-1 AU-5 CC 02 S-2 CC 03 S-3 CC 04 S-4 CC 05 S-5 CC 06 S-6 AU-5A CC 07 S-7 CC 08 S-8 CC 09 S-9 CC 10 S-10 CC 11 S-11 CC 12 S-12 CC 13 S-13 CC 14 A S-14 CC 15 B S-15 CC 16 C S-16 CC 17 D S-17 CC 18 E S-18 CC 19 F S-19 CC 20 G S-20 CC 21 H S-21 CC 22 I S-22 CC 23 J S-23

US CCIR OIRT AUSTRALIA

Channel

CC 24 K S-24 CC 25 L S-25 CC 26 M S-26 CC 27 N S-27 CC 28 O S-28 CC 29 P S-29 CC 30 Q S-30 CC 31 R S-31 CC 32 S S-32 CC 33 T S-33 CC 34 U S-34 CC 35 V S-35 CC 36 W S-36 CC 37 W+1 S-37 CC 38 W+2 S-38 CC 39 W+3 S-39 CC 40 W+4 S-40 CC 41 W+5 S-41 CC 42 W+6 CC 43 W+7 CC 44 W+8 CC 45 W+9 CC 46 W+10 CC 47 W+11 CC 48 W+12 CC 49 W+13 CC 50 W+14 CC 51 W+15 CC 52 W+16 CC 53 W+17 CC 54 W+18 CC 55 W+19 CC 56 W+20 CC 57 W+21 CC 58 W+22 CC 59 W+23 CC 60 W+24 CC 61 W+25 CC 62 W+26 CC 63 W+27 CC 64 W+28 CC 75 X CC 76 Y R3 CC 77 Z R4 AU-3 CC 78 Z+1 R5 CC 79 Z+2 AU-4 CC 95 A-5 CC 96 A-4 CC 97 A-3 CC 98 A-2 CC 99 A-1

Speciﬁ cation

Main unit Terminals / Connectors

Model LT-42Z10

Broadcasting systems Area-1 B / G / I / D / K / M

Colour systems Area-1 PAL / SECAM / NTSC 3.58 / NTSC 4.43

Channels and frequencies

Sound-multiplex systems NICAM (I / B / G / D / K), A2 (B / G / D / K) Teletext systems FLOF (Fastext), WST (World System Teletext) Power requirements AC 110 V - 240 V, 50/60Hz Audio output

(Rated power output) Speakers (4 cm x 16 cm) x 2 Power consumption

[standby] ["Rocket Start" mode standby]

Screen size (visible area size measured diagonally)

Dimensions (W x H x D: mm) [without stand]

Weights [without stand]

Accessories Power cord x 1

Area-2 M / N

Area-2 NTSC / PAL-M / PAL-N Area-1

Area-2

Receives cable channels in mid band (X to Z+2, S1 to S10), super band (S11 to S20) and hyper band (S21 to S41)

Remote control unit : RM-C2023 x 1 AAA/R03 dry cell battery x 2 Screw x 8

VHF low channel (VL) = 46.25 to 140.25 MHz VHF high channel (VH) = 147.25 to 423.25 MHz UHF channel (U) = 431.25 to 863.25 MHz

VHF low channel (VL) = 55.25 to 127.25 MHz VHF high channel (VH) = 133.25 to 361.25 MHz UHF channel (U) = 367.25 to 801.25 MHz

10 W + 10 W

167 W

[1 W]

[15W]

106.7 cm

1014.8 x 695.4 x 279

[1014.8 x 646.9 x 108.7]

20 kg

[19 kg]

Terminal name Terminal type Signal type (IN)

Composite video, Analogue component 576i (625i) / 480i (525i), Progressive : 576p (625p) / 480p (525p), HD : 1080i (1125i), 720p (750p) / 1080p (1125p) Audio L / R

Composite video, Audio L / R

HDMI 576i (625i) / 480i (525i) / 576p (625p) / 480p (525p), 720p (750p) / 1080p (1125p) / 1080i (1125i)

Audio L/R

Analogue PC signal

Audio

Microphone input

Input terminals

Output terminals

VIDEO-1

VIDEO-2

HDMI-1

HDMI-2

HDMI-3

IN HDMI -1

PC INPUT

PC AUDIO

Microphone

MONITOR OUT

RCA connectors x 6

RCA connectors x 3

HDMI connector x 1

RCA connectors x 2

D-SUB (15 pins) x 1

PC-IN (3.5 pinjack) x 1

mini-jack x 1 (3.5 mm in diameter)

RCA connectors x 3

Signal type (OUT)

Subwoofer, Audio L / R

We may change the design and speciﬁ cations without notice.• HDMI, the HDMI Logo, and High-Deﬁ nition Multimedia Interface are • trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries.

JVC GGT0359-001A-H User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual

Safety precautions

Remote control buttons and functions

Set up and connections

Initial Settings

Registering / Editing channels

Channel Summary

Operating the menus

Picture setting

Sound setting

Useful functions

Multi Media Input

Viewing Teletext Viewing Closed Caption

Watching Video or DVDs

Technical information

Troubleshooting

CH / CC List