JVC GET0638-001A User Manual

Having TROUBLE with operation?

Please reset your unit

Refer to page of How to reset your unit

Still having trouble??

USA ONLY

Call 1-800-252-5722

http://www.jvc.com

We can help you!

ENGLISH

ESPAÑOL

FRANÇAIS

KD-R618 / KD-A615 / KD-R610

CD RECEIVER / RECEPTOR CON CD / RÉCEPTEUR CD

KD-A615 / KD-R610

For canceling the display demonstration, see page 4. / Para cancelar la demostración en pantalla, consulte la página 4. / Pour annuler la démonstration des affichages, référez-vous à la page 4.

For installation and connections, refer to the separate manual. Para la instalación y las conexiones, refiérase al manual separado. Pour l’installation et les raccordements, se référer au manuel séparé.

INSTRUCTIONS

MANUAL DE INSTRUCCIONES

MANUEL D’INSTRUCTIONS

For customer Use:

Enter below the Model No. and Serial No. which are located on the top or bottom of the cabinet. Retain this information for future reference. Model No. Serial No.

EN, SP, FR

GET0638-001A

[J]

INFORMATION (For U.S.A.)

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: – Reorient or relocate the receiving antenna. – Increase the separation between the equipment and receiver. – Connect the equipment into an outlet on a circuit different from that to which the receiver is

connected.

– Consult the dealer or an experienced radio/TV technician for help.

Caution:

Changes or modifications not approved by JVC could void the user’s authority to operate the equipment.

IMPORTANT FOR LASER PRODUCTS

1. CLASS 1 LASER PRODUCT

2. CAUTION: Do not open the top cover. There are no user serviceable parts inside the unit; leave all servicing to qualified service personnel.

3. CAUTION: (For U.S.A.) Visible and/or invisible class II laser radiation when open. Do not stare

into beam.

(For Canada) Visible and/or invisible class 1M laser radiation when open. Do not

view directly with optical instruments.

4. REPRODUCTION OF LABEL: CAUTION LABEL, PLACED OUTSIDE THE UNIT.

[European Union only]

Warning:

If you need to operate the unit while driving, be sure to look around carefully or you may be involved in a traffic accident.

2 ENGLISH

For safety...

• Do not raise the volume level too much, as this will block outside sounds, making driving dangerous.

• Stop the car before performing any complicated operations.

Temperature inside the car...

If you have parked the car for a long time in hot or cold weather, wait until the temperature in the car becomes normal before operating the unit.

How to read this manual

The following icons/symbols are used to indicate:

Press and hold the button(s)

[Hold]

until the desired operation begins.

Turn the control dial.

Turn the control dial to make a selection, then press to confirm.

(

<XXXX> Menu setting item

Reference page number

XX)

Continued on the next page

How to attach/detach the control panel

How to reset your unit

Your preset adjustments will also be erased (except the registered Bluetooth device). ( 11)

How to forcibly eject a disc

[Hold]

• You can forcibly eject the loaded disc even if the disc is locked. To lock/unlock the disc,

• Be careful not to drop the disc when it ejects.

• If this does not work, reset your unit.

Thank you for purchasing a JVC product.

Please read all instructions carefully before

operation, to ensure your complete

understanding and to obtain the best possible

performance from the unit.

CONTENTS

3 How to read this manual 3 How to attach/detach the control

panel

3 How to reset your unit 3 How to forcibly eject a disc

Canceling the display demonstration

4 Setting the clock 5 Preparing the remote controller

(RM-RK50)

6 Basic operations 7 Listening to the radio 9 Listening to a disc 10 Listening to the USB device 11 Using Bluetooth ® devices

13 Using a Bluetooth mobile phone 14 Using a Bluetooth audio player

16 Listening to the HD Radio ™

Broadcast

18 Listening to the satellite radio 20 Listening to the iPod/iPhone 22 Listening to the other external

components

23 Selecting a preset sound mode 24 Menu operations 31 More about this unit 35 Maintenance 36 Troubleshooting 42 Specifications

3ENGLISH

Canceling the display demonstration

1 Turn on the power.

[Hold]

(Initial setting)

Setting the clock

1 Turn on the power.

3 Select <CLOCK>.

4 Select <CLOCK SET>.

5 Adjust the hour.

[Hold]

(Initial setting)

4 Select <DEMO OFF>.

6 Finish the procedure.

6 Adjust the minute.

7 Finish the procedure.

4 ENGLISH

Preparing the remote controller (RM-RK50)

When you use the remote controller for the first time, pull out the insulation sheet.

Insulation sheet

For USA-California Only: This product contains a CR Coin Cell Lithium Battery which contains Perchlorate Material— special handling may apply. See www.dtsc.ca.gov/hazardouswaste/ perchlorate

If the effectiveness of the remote controller decreases, replace the battery.

Replacing the lithium coin battery

CR2025

Caution:

• Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type.

• Battery shall not be exposed to excessive heat such as sunshine, fire, or the like.

Warning (to prevent accidents and damage):

• Do not install any battery other than CR2025 or its equivalent.

• Do not leave the remote controller in a place (such as dashboards) exposed to direct sunlight for a long time.

• Store the battery in a place where children cannot reach.

• Do not recharge, short, disassemble, heat the battery, or dispose of it in a fire.

• Do not leave the battery with other metallic materials.

• Do not poke the battery with tweezers or similar tools.

• Wrap the battery with tape and insulate when throwing away or saving it.

KD-R618/KD-A615 is equipped with the steering wheel remote control function. Before operating, connect an exclusive remote adapter (not supplied) which matches your car to the steering wheel remote input terminal on the rear of the unit.

• For details, refer also to the instructions supplied with the remote adapter.

5ENGLISH

Basic operations

Ejects the disc

Detaches the panel

When you press or hold the following button(s)...

Main unit

Loading slot USB (Universal Serial Bus) input jack

Control dial

Display window

• DO NOT expose to bright sunlight.

Remote

controller

Turns on.

• When the power is on, pressing also mutes the sound or pauses. Press /I/ATT again to cancel muting or resume playback.

Turns off if pressed and held.

Selects the available sources (if the power is turned on).

• If the source is ready, playback also starts.

Auxiliary input jack

Remote sensor

General operation

/I/ATT on the remote controller

6 ENGLISH

Adjusts the volume level.

—

Selects items.

• Mutes the sound while listening to a source. If the source is “CD,”

—

“USB” or “USB-IPOD,” playback pauses. Press the control dial again to cancel muting or resume playback.

• Confirms selection.

Selects the sound mode.

• Enters tone level adjustment directly ( 23) if pressed and held EQ/BASS-TRE on the main unit.

Main unit

Remote

controller

—

• Enters <COLOR> setting directly (

•

Enters <COLOR SETUP> setting directly ( 30) if pressed and held.

Returns to the previous menu.

Power off : Checks the current clock time. Power on : Changes the display information.

Listening to the radio

General operation

29).

]

“FM” or “AM”

“ST” lights up when receiving an FM stereo broadcast with sufficient signal strength.

Manual search

“M” flashes, then press

[Hold]

the button repeatedly.

When an FM stereo broadcast is hard to receive

[Hold]

]

<TUNER> ] <MONO> ] <MONO ON> Reception improves, but stereo effect will be lost.

To restore the stereo effect, repeat the same procedure to select <MONO OFF>.

Automatic presetting (FM)—

SSM (Strong-station Sequential Memory)

You can preset up to 18 stations for FM.

While listening to a station...

[Hold]

]

<TUNER> ] <SSM> ] <SSM 01 – 06> / <SSM 07 – 12> / <SSM 13 – 18> “SSM” flashes and local stations with the strongest signals are searched and stored automatically.

To preset another 6 stations, repeat the above procedure by selecting one of the other 6 SSM setting ranges.

If an HD Radio tuner box is connected ( you can also search and store 6 stations for AM by following the above operations.

16),

7ENGLISH

Manual presetting (FM/AM)

You can preset up to 18 stations for FM and 6 stations for AM.

Ex.: Storing FM station of 92.50 MHz into preset number “04.”

]

“92.50MHz”

“PRESET MODE” flashes.

[Hold]

]

Selects preset number “04.”

“P04” flashes and “MEMORY” appears.

Selecting a preset station

Changing the display information

Station name * = Frequency = Clock = (back to the beginning)

* If no title is assigned to a station, “NO NAME”

appears for a few seconds.

Using the remote controller

5 U

/ D ∞: Changes the preset

stations

2 R

/ F 3: Searches for stations

Title assignment

You can assign titles up to 30 station frequencies (FM and AM) using 8 characters (maximum) for each title.

• If you try to assign titles to more than 30 station frequencies, “NAME FULL” appears. Delete unwanted titles before assignment.

• When HD Radio tuner box is connected ( 16), this feature will be disabled.

]

“FM” or “AM”

]

Show the title entry screen.

[Hold]

]

Select a character.

]

Move to the next (or previous)

character position.

Repeat steps 3 and 4 until you have

finished entering the title.

To erase the entire title, press and hold after step 2, then press the control dial.

Available characters

ABCDEFGHI

JKLMNOPQR STUVWXYZ0 123456789

—/ <> Space

DISP

8 ENGLISH

Listening to a disc

]

Turn on the power.

All tracks will be played repeatedly until you change the source or eject the disc.

Stopping playback and ejecting the disc

“NO DISC” appears. Press /

SOURCE

to listen to

another playback source.

Prohibiting disc ejection

[Hold]

To cancel the prohibition, repeat the same procedure.

Selects folder of the MP3/WMA

Selects track

Fast-forwards or

[Hold]

reverses the track

Selecting a track/folder

For MP3/WMA discs, select the desired folder, then the desired track by repeating the control dial procedures.

• If the MP3/WMA disc contains many tracks, you can fast search (±10, ±100, ±1000) through the disc by turning the control dial quickly.

• To return to the previous menu, press

BACK

Caution on volume setting:

Discs produce very little noise compared with other sources. Lower the volume before playing a disc to avoid damaging the speakers by the sudden increase of the output level.

Selecting the playback modes

You can use only one of the following playback modes at a time.

[Hold]

]

“REPEAT” j “RANDOM”

REPEAT TRACK RPT : Repeats current track FOLDER RPT : Repeats current folder

RANDOM FOLDER RND : Randomly plays all tracks

of current folder, then tracks of next folders

ALL RND : Randomly plays all tracks

To cancel repeat play or random play, select “RPT OFF” or “RND OFF.”

9ENGLISH

Changing the display information

Disc title/Album name/performer (folder name)* = Track title (file name)* = Current track number with the elapsed playing time

Current track number with the clock

time

(back to the beginning)

* If the current disc is an audio CD, “NO NAME”

appears. If an MP3/WMA file does not have Tag information or <TAG DISPLAY> is set to <TAG OFF> ( 25), folder name and file name appear.

Using the remote controller

5 U

/ D ∞: Selects folder of the

MP3/WMA

2 R

/ F 3: Selects track

2 R

/ F

: Fast-forwards or

[Hold]

reverses the track

Listening to the USB device

This unit can play MP3/WMA files stored on a USB mass storage class device. You can connect a USB mass storage class device such as a USB memory, Digital Audio Player, etc. to the unit.

• You can also connect an Apple iPod/iPhone to the USB input jack. For details of the operations, 20 – 21.

]

Turn on the power.

Caution on volume setting:

USB devices produce very little noise compared with other sources. Lower the volume before playing a USB to avoid damaging the speakers by sudden increase of the output level.

If you have turned off the power (without detaching the USB device)...

Pressing playback starts from where it has been stopped previously.

• If a different USB device is currently attached,

10 ENGLISH

/ SOURCE

turns on the power and

playback starts from the beginning.

USB input jack

USB memory

All tracks will be played repeatedly until you change the source or detach the USB device.

Stop playing and detaching the USB device

Straightly pull it out from the unit. “NO USB” appears. Press another playback source.

You can operate the USB device in the same way you operate the files on a disc. (

/ SOURCE

to listen to

Cautions:

• Avoid using the USB device if it might hinder your safety driving.

• Do not pull out and attach the USB device repeatedly while “READING” is shown on the display.

• Do not start the car engine if a USB device is connected.

• This unit may not be able to play the files depending on the type of USB device.

• Operation and power supply may not work as intended for some USB devices.

• You cannot connect a computer to the USB input terminal of the unit.

• Make sure all important data has been backed up to avoid losing the data.

• Do not leave a USB device in the car, expose to direct sunlight, or high temperature to avoid deformation or cause damages to the device.

• Some USB devices may not work immediately after attaching USB device or turn on the power.

• For more details about USB operations, 32, 33.

Using Bluetooth ® devices

For Bluetooth operations, it is required to connect the Bluetooth adapter, KS-BTA200 (not supplied) to the expansion port on the rear of this unit.

• Refer to pages i and ii at the end of the manual to check the countries where you may use the Bluetooth ® function.

• For details, refer also to the instructions supplied with the Bluetooth adapter and the Bluetooth device.

To use a Bluetooth device through the unit (“BT-PHONE” and “BT-AUDIO”) for the first time, you need to establish a Bluetooth wireless connection between the unit and the device.

• Once the connection is established, it is registered on the unit even if you reset your unit. Up to five devices can be registered in total.

• Only one device can be connected at a time for each source (“BT-PHONE” and “BT-AUDIO”).

Registration (Pairing) methods

Use either of the following items (“OPEN” or “SEARCH” ) in the Bluetooth menu to register and make the unit ready to establish a new Bluetooth connection with a device.

“OPEN” : Connection is established by

operating the Bluetooth device.

“SEARCH” : Connection is established by

operating the unit.

Registering using “OPEN”

Preparation: Operate the device to turn on its Bluetooth function.

]

“BT-PHONE” or “BT-AUDIO”

]

“NEW DEVICE” ] “OPEN”

]

Enter a PIN (Personal Identification Number) code in to the unit. You can enter any number you like (1-digit to 16-digit number). [Initial: 0000]

• Some devices have their own PIN

code. Enter the specified PIN code in to the unit.

11ENGLISH

Repeat step 3 on page 11 until you

have finished entering the PIN code.

“OPEN..” flashes.

Use the Bluetooth device to search and

connect. On the device to be connected, enter the same PIN code you have just entered for this unit. “CONNECTED” appears. Now connection is established and you can use the device through the unit.

The device remains registered even after you disconnect the device. Use “CONNECT“ (or activate “AUTO CNNCT”) to connect the same device from next time on. (

15)

Registering using (“SEARCH”/“SPECIAL”)

]

“BT-PHONE” or “BT-AUDIO”

]

“NEW DEVICE”

]

“SEARCH” : To search for available devices The unit searches and displays the list of the available devices. “UNFOUND” appears if no available device is detected.

– – – – – or – – – – –

]

“SPECIAL” : To connect a special device The unit displays the list of the preset devices.

]

Select a device you want to connect.

For available devices...

]

Enter the specific PIN code of the

device to the unit.

• Refer to the instructions supplied with the device to check the PIN code.

Use the Bluetooth device to connect. Now connection is established and you can use the device through the unit.

For special device...

Use “OPEN” or “SEARCH” to connect.

Connecting/disconnecting/ deleting a registered device

]

“BT-PHONE” or “BT-AUDIO”

]

Select a device you want to

connect/disconnect/delete.

]

“CONNECT” or “DISCONNECT” : To

connect/disconnect the selected device

– – – – – or – – – – –

]

“DELETE” ] “YES” : To delete the

selected device

You can set the unit to connect the Bluetooth device automatically when the unit is turned on. ( “AUTO CNNCT,”

15)

12 ENGLISH

Using a Bluetooth mobile phone

]

“BT-PHONE”

]

Bluetooth menu

! Make a call or setting using

the Bluetooth setting menu. ( 15)

When a call comes in....

The source is automatically changed to “BT-PHONE.”

• The display will flash in blue. (<RING COLOR>,

26)

When “AUTO ANSWER” is activated....

The unit answers the incoming calls automatically. ( 15)

• When “AUTO ANSWER” is deactivated, press any button (except answer the incoming call.

• You can adjust the microphone volume level. ( 15)

To end the call

Hold any button (except

When a text message comes in....

If the mobile phone is compatible with text message (notified through JVC Bluetooth adapter) and “MSG INFO” (message info) is set to “AUTOMATIC” ( 15), the unit rings to inform you of the message arrival.

• “RCV MESSAGE” (receiving message) appears and the display illuminate in blue. (<RING COLOR>, 26)

/ SOURCE

/ / 0) to

/ / 0).

Using the remote controller

5 U

/ D ∞ /

: Answers calls

2 R

/ F 3 /

SOURCE

5 U

/ D ∞ /

: Rejects calls

2 R

/ F 3 /

SOURCE

[Hold]

Making a call

]

“BT-PHONE”

]

Select “DIAL” menu.

]

Select a calling method.

PHONE BOOK* j MISSED* j NUMBER j VOICE DIAL j REDIAL*j RECEIVED* j (back to

the beginning) * Displays only when your mobile phone

is equipped with these functions and is compatible with this unit.

13ENGLISH

For REDIAL, RECEIVED, MISSED

]

Repeat step 4 on page 13 to select a name (if it is acquired) or a phone number.

For PHONE BOOK

]

Repeat step 4 on page 13 to select a name or a phone number.

For NUMBER

]

Enter a phone number.

]

Confirm.

For VOICE DIAL

]

Speak the name you want to call when “SAY NAME” appears.

• If your mobile phone does not support

the voice recognition system, “ERROR” appears.

• Using voice tags may be difficult in

a noisy environment or during an emergency.

• To return to the previous menu, press 5.

Using a Bluetooth audio player

]

“BT-AUDIO” If playback does not start, operate the Bluetooth audio player to start playback. Operate the Bluetooth audio player to pause (if playback does not pause when you change the source).

Reverse skips/forward skips

Pauses/starts playback* * Operation may be different

according to the connected Bluetooth audio player.

Enter setting menu (Device list)

For connecting/disconnecting/deleting a registered device, 12.

Using the remote controller

2 R

/ F 3: Reverse skips/forward

skips

14 ENGLISH

Changing the Bluetooth settings

]

“BT-PHONE” or “BT-AUDIO”

]

Bluetooth menu

]

“SETTINGS”

]

Select a setting item.

AUTO CNNCT j AUTO ANSWER *1

MSG INFO *2 j MIC SETTING *1

VERSION *3 j (back to the

beginning)

]

Change the setting accordingly. For

setting menu, right column.

Appears only when a Bluetooth phone is

connected.

*2 Appears only when a Bluetooth phone is

connected and it is compatible with text message (notified through JVC Bluetooth adapter).

*3 Bluetooth Audio: Shows only “Version.”

Setting menu [Initial: Underlined]

AUTO CNNCT (connect)

When the unit is turned on, the connection is established automatically with...

OFF: No Bluetooth device. LAST: The last connected Bluetooth device. ORDER: The available registered Bluetooth

device found at first.

AUTO ANSWER

Only for the device being connected for “BT-PHONE.” ON: The unit answers the incoming calls

automatically.

OFF: The unit does not answer the calls

automatically. Answer the calls manually.

REJECT: The unit rejects all incoming calls.

MSG INFO (message info)

Only for the device being connected for “BT-PHONE.” AUTOMATIC: The unit informs you of the

arrival of a message by ringing and displaying “RCV MESSAGE” (receiving message).

• The display illuminate in blue. (<RING COLOR>,

MANUAL: The unit does not inform you of

the arrival of a message.

MIC SETTING (microphone setting)

Only for the device being connected for “BT-PHONE.” Adjust microphone volume connected to the Bluetooth adapter, [LEVEL 01/02/03].

26)

VERSION

The Bluetooth software and hardware versions are shown.

15ENGLISH

Warning messages

ERROR CNNCT (Error Connection) The device is registered but the connection

has failed. Use “CONNECT” to connect the device again. (

ERROR

Try the operation again. If “ERROR” appears

again, check if the device supports the function you have tried.

UNFOUND

No available Bluetooth device is detected by

“SEARCH.”

Bluetooth Information: If you wish to receive more information about Bluetooth, visit the following JVC web site: <http://www.jvc.co.jp/english/car/> (English website only)

12)

LOADING * The unit is updating the phone book.

PLEASE WAIT

The unit is preparing to use the Bluetooth

function. If the message does not disappear, turn off and turn on the unit, then connect the device again (or reset the unit).

RESET 8

Check the connection between the adapter

and this unit.

* Displays only when your mobile phone

is equipped with these functions and is compatible with this unit.

Listening to the HD Radio ™ Broadcast

Before operating, connect HD Radio tuner box, KT-HD300 (not supplied) to the expansion port on the rear of the unit.

• For details, refer also to the instructions supplied with the HD Radio tuner box.

What is HD Radio Technology?

HD Radio Technology can deliver high-quality digital sound—AM digital will have FM-like quality (in stereo) and FM digital will have CD-like quality—with static-free and clear reception. Furthermore, stations can offer text and data, such as artist names and song titles.

16 ENGLISH

• When the HD Radio tuner box is connected, it can also receive conventional analog broadcasts.

• Many HD Radio stations also offer more than one channel of programming. This service is called multicasting.

• To find HD Radio stations in your area, visit <http://www.hdradio.com/>.

For basic radio operations,

7, 8.

When receiving...

An HD Radio station

Lights up when digital audio is broadcast Flashes when analog audio is broadcast

Station Call Sign appears.

Changing HD Radio reception mode

While receiving an HD Radio broadcast, the unit receives digital or analog audio automatically due to the receiving condition.

While listening to an HD Radio station...

[Hold]

HD Radio multicast channels

Channel number

First four letters of Call Sign

Select your desired channel.

HD1 j HD2 j .... j HD8

(back to the beginning)

“LINKING” appears while linking to a multicast channel.

Searching for HD Radio stations only

“HD” flashes.

[Hold]

]

<TUNER> ] <BLEND HOLD> ] <AUTO> / <DIGITAL> / <ANALOG> “HD” lights up when holding the digital reception or flashes when holding the analog reception.

• If no sound can be heard with <AUTO>, change the setting to <ANALOG> or <DIGITAL>.

• The setting automatically changes to <AUTO> if you tune in to or change to another station, or if you turn off the power.

• This setting cannot take effect for the conventional FM/AM stations.

• If the radio station forces the reception mode to digital, the HOLD indicator flashes.

Changing the display information

Call Sign *1 = Frequency = Title/artist/album name of the current segment *2 = Clock =

*2 “NO TEXT” appears when no text is received.

(back to the beginning)

“ **** -FM” or “ **** ” appears when no Call Sign is received.

Using the remote controller

5 U

/ D ∞: Changes the preset

stations

2 R

/ F 3: Searches for stations

17ENGLISH

Listening to the satellite radio

Before operating, connect either one of the following systems (not supplied) to the expansion port on the rear of this unit.

For listening to a SIRIUS Satellite radio:

• SC-C1 and KS-SRA100

• PnP, SC-VDOC1 and KS-SRA100

For listening to an XM Satellite radio:

• JVC Smart Digital Adapter (XMDJVC100)

• CNP2000UC and CNPJVC1

• For details, refer also to the instructions supplied with the other components.

]

Select a channel to listen.

Holding the button changes the

channels rapidly.

While searching, invalid and

unsubscribed channels are skipped.

XM: If you do not select a channel

within 15 seconds, category selected

is canceled. You can select

in step all channels of all categories now (including non-categorised channels).

GCI (Global Control Information) update

• If channels are updated after subscription, updating starts automatically. “UPDATING” flashes and no sound can be heard.

• Update takes a few minutes to complete.

• During update, you cannot operate your satellite radio.

]

“SIRIUS” or “XM”

]

Select a category.

SIRIUS: If you select “ALL,” you can

tune in to all the channels of all categories.

Activate your SIRIUS subscription after connection

]

“SIRIUS” SIRIUS Satellite radio starts updating all the SIRIUS channels. Once completed, SIRIUS Satellite radio tunes in to the preset channel, CH184.

Check your SIRIUS ID. ( 25)

Contact SIRIUS on the internet at

<http://activate.siriusradio.com/> to activate your subscription, or you can call SIRIUS toll-free at 1-888-539-SIRIUS (7474).

• “SUB UPDT PRESS ANY KEY” scrolls on

the display once subscription has been completed.

18 ENGLISH

Activate your XM subscription after connection

• Only Channel 0, 1, and 247 are available before activation.

]

“XM” XMDirect ™ Tuner Box or XMDirect2 Tuner System starts updating all the XM channels. “Channel 1” is tuned in automatically.

Check your XM Satellite radio ID labelled

on the casing of the XMDirect™ Tuner Box or XMDirect2 Tuner System, or tune in to “Channel 0”. ( right column)

Contact XM Satellite radio on

the internet at <http://xmradio. com/activation/> to activate your subscription, or you can call 1-800-XMRADIO (1-800-967-2346).

• Once completed, the unit tunes in to

one of the available channels (Channel 4 or higher).

Storing channels in memory

You can preset up to 18 channels for both SIRIUS and XM.

Ex.: Storing channel into preset number “04.”

Tune in to a channel you want to store.

(Steps ~ – !, 18.)

[Hold]

“PRESET MODE” flashes.

]

Select preset number “04.” “P04” flashes.

Selecting SIRIUS/XM preset station

Checking the satellite radio ID

While selecting “SIRIUS” or “XM”...

]

Select “Channel 0.” SIRIUS: SIRIUS identification number is displayed after “Channel 0” is selected. XM: The display alternately shows “RADIO ID” and the 8-digit (alphanumeric) ID number.

To cancel the ID number display, select any channel other than “Channel 0.”

Changing the display information

Category name = Channel name

Artist name = Composer name * = Song/program name/ title = Clock = (back to the

beginning)

* Only for SIRIUS Satellite radio.

Using the remote controller

5 U

/ D ∞: Changes the

Category

DEMO

CLOCK

PRO EQ

Displayed only when SIRIUS Satellite radio or XM Satellite radio is connected.

* *2 Displayed only when <CLOCK ADJ> is set to <AUTO>.

[Hold]

Menu item Selectable setting, [Initial: Underlined]

DEMO

Display demonstration

CLOCK SET Clock setting—[1:00]

CLOCK ADJ *

Clock adjustment

TIME ZONE *

1, *2

DST * Daylight savings time

BASS —

MIDDLE

TREBLE

• DEMO ON

• DEMO OFF

• AUTO

• OFF

1, *2

EASTERN, ATLANTIC, NEWFOUND, ALASKA, PACIFIC, MOUNTAIN, CENTRAL

• DST ON

• DST OFF

: Display demonstration will be activated

automatically if no operation is done for about 20 seconds.

: Cancels. ( 4)

: Adjust the hour, then the minute. (

: The built-in clock is automatically adjusted

using the clock data provided via the satellite radio channel.

: Cancels.

: Select your residential area from one of the time

zones for clock adjustment.

: Activates daylight savings time if your

residential area is subject to DST.

: Cancels.

: For settings,

Repeat step 2 if necessary.

• To return to the previous menu, press

BACK

• To exit from the menu, press or

23.

DISP

24 ENGLISH

Category

Menu item Selectable setting, [Initial: Underlined]

DIMMER •

SCROLL *

DISPLAY

DIMMER AUTO

• DIMMER ON

• DIMMER OFF

• SCROLL ONCE

• SCROLL AUTO

• SCROLL OFF

DISP

Pressing

for more than one second can scroll the display

: Dims the display when you turn on the

headlights. *

: Dims the display and button illumination. : Cancels.

: Scrolls the displayed information once. : Repeats scrolling (at 5-second intervals). : Cancels.

regardless of the setting.

TAG DISPLAY • TAG ON

: Shows the Tag information while playing MP3/

WMA tracks.

SSM* Strong-station Sequential

• TAG OFF

• SSM 01 – 06 *

• SSM 07 – 12

• SSM 13 – 18

: Cancels.

: For settings,

Memory

AREA

Tuner channel interval

• AREA US

• AREA EU

: When using in North/Central/South America.

AM/FM intervals are set to 10 kHz/200 kHz.

: When using in any other areas. AM/FM intervals

are set to 9 kHz/50 kHz (100 kHz during auto search).

TUNER

MONO *

Monaural mode

SID * SIRIUS ID

• AREA SA

• MONO ON

• MONO OFF

— : Your SIRIUS identification number scrolls on the

: When using in South American countries

where FM interval is 100 kHz. AM interval is set to 10 kHz.

: Activate monaural mode to improve FM

reception, but stereo effect will be lost. ( 7)

: Restore the stereo effect.

display 5 seconds after “SID” is selected. ( 19)

If no operation is done for about 60 seconds,

the unit returns to playback mode.

The illumination control lead connection is required. (See “Installation/Connection Manual.”) This

setting may not work correctly on some vehicles (particularly on those having a control dial for

dimming). In this case, change the setting to any other than <DIMMER AUTO>. *4 Some characters or symbols will not be shown correctly (or will be blanked) on the display. *5 Displayed only when the source is “FM” or “HD Radio.” *6 If an HD Radio tuner box is connected, you can also search and store the AM stations to

<SSM 01 – 06>. *7 Displayed only when SIRIUS Satellite radio is connected.

25ENGLISH

Category

Menu item Selectable setting, [Initial: Underlined]

BLEND HOLD * HD Radio reception mode

IF BAND

Intermediate

TUNER

frequency band

• AUTO

• DIGITAL

• ANALOG

• AUTO

• WIDE

: Switch between digital and analog audio

automatically. ( 17) : Tune in to digital audio only. : Tune in to analog audio only.

: Increases the tuner selectivity to reduce

interference noises between adjacent stations.

(Stereo effect may be lost.) : Subject to interference noises from adjacent

stations, but sound quality will not be

degraded and the stereo effect will remain.

BUTTON ZONE COLOR 01 —

COLOR 29, USER

COLOR

DISP ZONE

Display zone

ALL ZONE

DAY COLOR • BUTTON ZONE

: For settings,

• DISP ZONE

NIGHT COLOR

• BUTTON ZONE

: For settings,

• DISP ZONE

MENU COLOR

• ON

: Changes the display and buttons (except for

EQ/BASS-TRE

DISP

list search and playback mode operations.

• OFF

RING COLOR *9• ON

COLOR SETUP

: Cancels.

: When a call comes in, the display will flash in

blue.

• The display will change to the original color

when the call is answered or the incoming call stops.

When the unit receives a text message, the

display only illuminate in blue.

• OFF

Displayed only when HD Radio tuner box is connected.

: Cancels.

*9 Displayed only when Bluetooth adapter, KS-BTA200 is connected.

29.

30.

) illumination during menu,

26 ENGLISH

Category

Menu item Selectable setting, [Initial: Underlined]

FADER *

BALANCE *

LOUD

Loudness

VOL ADJUST

Volume adjust

R06 – F06 [00]

L06 – R06

[00]

• LOUD ON

• LOUD OFF

VOL ADJ –05 — VOL ADJ +05

[VOL ADJ 00]

: Adjust the front and rear speaker output

balance.

: Adjust the left and right speaker output

balance.

: Boost low and high frequencies to produce a

well-balanced sound at a low volume level. : Cancels.

: Preset the volume adjustment level of

each source (except FM), compared to the

FM volume level. The volume level will

automatically increase or decrease when you

change the source.

• Before making an adjustment, select the

source you want to adjust.

• “VOL ADJ FIX” appears on the display if “FM”

AUDIO

L/O MODE

Line output mode

• SUB.W

• REAR

is selected as the source.

: Select if the REAR LINE OUT terminals are

used for connecting a subwoofer (through

an external amplifier). : Select if the REAR LINE OUT terminals are

used for connecting the speakers (through

an external amplifier).

SUB.W FREQ * Subwoofer cutoff frequency

• LOW

: Frequencies lower than 72 Hz are sent to the

subwoofer.

• MID

: Frequencies lower than 111 Hz are sent to

the subwoofer.

• HIGH

: Frequencies lower than 157 Hz are sent to

the subwoofer.

SUB.W LEVEL * Subwoofer level

SUB.W 00 — SUB.W 08

: Adjust the subwoofer output level.

[SUB.W 04]

If you are using a two-speaker system, set the fader level to “00.”

* *11 This adjustment will not affect the subwoofer output. *12 Displayed only when <L/O MODE> is set to <SUB.W>.

27ENGLISH

Category

Menu item Selectable setting, [Initial: Underlined]

BEEP

Keytouch tone

AMP GAIN * Amplifier gain

AUDIO

control

AM * AM station

EXT IN * External input

SRC SELECT

AUX IN *

Auxiliary input

AUDIOBOOKS * Speed control of “Audiobooks”

• BEEP ON

• BEEP OFF

• LOW POWER

• HIGH POWER

• AM ON

• AM OFF

• EXT ON

• EXT OFF

• AUX ON

• AUX OFF

• NORMAL

• FASTER

• SLOWER

: Activates the keypress tone. : Deactivates the keypress tone.

: VOLUME 00 – VOLUME 30 (Select if the

maximum power of each speaker is less than

50 W to prevent damaging the speakers.) : VOLUME 00 – VOLUME 50

: Enable “AM” in source selection. : Disable “AM” in source selection.

: Enable “EXT IN” in source selection. : Disable “EXT IN” in source selection.

: Enable “AUX IN” in source selection. : Disable “AUX IN” in source selection.

: You can select the playback speed of the

“Audiobook” sound file in your iPod.

• Initial selected item depends on your iPod

setting.

AUDIOBOOKS

IPOD SWITCH *

iPod/iPhone

IPOD

control

SWITCH

The volume level automatically changes to “VOLUME 30” if you change to <LOW POWER> with the

• HEAD MODE

• IPOD MODE

: Controls iPod playback through the unit. : Controls iPod playback through the iPod/

iPhone.

volume level set higher than “VOLUME 30.” *14 Displayed only when any source other than “AM” is selected. *15 Displayed only when any source other than “EXT IN“ is selected. *16 Displayed only when any source other than “AUX IN“ is selected. *17 Displayed only when an iPod is connected and playback is controlled from the unit. *18 Displayed only when “USB-IPOD” is selected as the source and “IPOD MODE” is available for the

connected iPod/iPhone ( 34).

28 ENGLISH

Selecting the variable buttons and display color illumination

You can select your preferred color for buttons illumination (except for display color separately.

EQ/BASS-TRE

DISP

) and

Button zone

[Hold]

]

<COLOR> ] <BUTTON ZONE> /

• Pressing

COLOR

in step 1 will enter zone selection menu (BUTTON ZONE / DISP ZONE / ALL ZONE) directly.

]

Select your preferred color from one

of the 29 preset colors or <USER> color.

All zone

Display zone

Repeat steps 2 and 3 to select a

different zone and your preferred color.

• If <ALL ZONE> is selected in step 2, the buttons and display illumination changed to the current/selected <BUTTON ZONE> color.

You can also change the <ALL ZONE>

color to one of your preferred color by performing step 3.

]

Exit from the setting.

29ENGLISH

Creating your own day and night colors—USER

You can create your own colors for <DAY COLOR> and <NIGHT COLOR> to apply to button zone and display zone.

• <DAY COLOR> Displayed when <DIMMER> is set to <DIMMER OFF>.

• <NIGHT COLOR> Displayed when <DIMMER> is set to <DIMMER ON>.

Menu hierarchy Operation

DAY

COLOR SETUP

Ex.: Creating <USER> color for <BUTTON ZONE> in <DAY COLOR>.

COLOR

NIGHT COLOR

• BUTTON ZONE

• DISP ZONE Press

• BUTTON ZONE

• DISP ZONE

Follow example below.

BACK

after step 5, then select DISP ZONE in step 2.

Press

BACK

after step 5, then select NIGHT COLOR in

step 2.

]

]

• Pressing zone selection menu (BUTTON ZONE / DISP ZONE) directly.

]

Select a primary color. RED j GREEN j BLUE j (back to the beginning)

30 ENGLISH

[Hold]

COLOR

in step 1 will enter

[Hold]

]

Adjust the level of the selected primary color. 00 to 31

Repeat steps 3 and 4 to adjust other

primary colors.

]

Exit from the setting.

If “00” is selected for all the primary colors (as in step 4) for <DISP ZONE>, nothing appear on the display.

+ 101 hidden pages