JVC GD-463D10U, LCT2574-001A-H, GD-463D10E, 0509SKH-SW-MT User Manual
GD-463D10U
Contents
GD-463D10E
3D LCD MONITOR INSTRUCTIONS
First things first!
Getting started
Let’s try it out
Try the advanced features
Just the way you like it
When you have trouble
z Safety Precautions ............................ 1
z Remote control.................................. 6
z Names and functions of parts ........... 7
z Getting started................................... 9
z Viewing 3D images ......................... 11
z Watching videos / DVDs ................. 13
z Useful functions .............................. 14
z Configuring your remote control...... 15
z Customising your monitor ............... 17
Picture............................................ 17
Features (sub menu)...................... 18
Sound............................................. 19
Features......................................... 20
Set Up ............................................ 21
z Troubleshooting .............................. 23
z Technical information ...................... 25
z Specifications .................................. 26
LCT2574-001A-H
Safety Precautions
1
The lightning flash with arrowhead
CAUTION
RISK OF ELECTRICAL SHOCK
DO NOT OPEN
To reduce the risk of electric shock. Do
CAUTION:
not remove cover (or back). No user
serviceable parts inside. Refer servicing
to qualified service personnel.
symbol, within an equilateral triangle is
intended to alert the user to the presence
of uninsulated “dangerous voltage”
within the product’s enclosure that may
be of sufficient magnitude to constitute a
risk of electric shock to persons.
The exclamation point within an
equilateral triangle is intended to alert
the user to the presence of important
operating and maintenance (servicing)
instructions in the literature
accompanying the appliance.
WARNING: TO REDUCE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT
EXPOSE THIS APPARATUS TO RAIN OR MOISTURE. NO
OBJECTS FILLED WITH LIQUIDS, SUCH AS VASES, SHALL
BE PLACED ON THE APPARATUS.
IMPORTANT SAFEGUARDS
Electrical energy can perform many useful functions. This unit has been
engineered and manufactured to assure your personal safety. But
IMPROPER USE CAN RESULT IN POTENTIAL ELECTRIC SHOCK OR
FIRE. In order not to defeat the safeguards incorporated into this product,
observe the following basic rules for its installation, use, and service. Please
read these “IMPORTANT SAFEGUARDS” carefully before use.
z All the safety and operating instructions should be read before the product
is operated.
z
The safety and operating instructions should be retained for future reference.
z All warnings on the product and in the operating instructions should be
adhered to.
z All operating instructions should be followed.
POWER CONNECTION
The power supply voltage rating of this product is AC 100 V – 240 V.
z This product should be operated only with the type of power source
indicated on the label. If you are not sure of the type of power supply of
your home, consult your product dealer or local electric power
company.
Note for United Kingdom power cord only
The plug of United Kingdom power cord has a built-in fuse. When
replacing the fuse, be sure to use only a correctly rated approved type,
re-fit the fuse cover. (Consult your dealer or
qualified personnel.)
How to replace the fuse
Open the fuse compartment with the blade
screwdriver, and replace the fuse.
Fuse
z Before connecting other products such as VCR’s and personal
computers, you should turn off the power of this product for protection
against electric shock.
z Do not use attachments not recommended by the manufacturer as they
may be hazardous.
z When replacement parts are required, be sure the service technician
has used replacement parts specified by the manufacturer or
equivalents. Unauthorized substitutions may result in fire, electric
shock, or other hazards.
z Upon completion of any service or repairs to this product, ask the
service technician to perform safety checks to determine that the
product is in proper operating condition.
Under the following conditions,
1. Turn off the power.
2. Unplug this product from the wall outlet.
3. Refer service to qualified service personnel.
a) When the product emits smoke or unusual smell.
b) When the product exhibits a distinct change in performance—for
example, no picture or no sound.
c) If liquid has been spilled, or objects have fallen on the product.
d) If the product has been exposed to rain or water.
e) If the product has been dropped or damaged in any way.
f) When the power supply cord or plug is damaged.
z Do not install this product in the following places:
– in a damp or dusty room
– where the product is exposed to soot or steam, such as near the
cooking counter or a humidifier
– near heat sources
– where condensation easily occurs, such as near the window
z Do not place this product on an unstable cart, stand, or table. The
product may fall, causing serious injury to a child or adult, and serious
damage to the product.
The product should be mounted according to the manufacturer’s
instructions, and should use a mount recommended by the
manufacturer.
z Do not use this product near water.
z Be sure to install the product in the place where proper temperature and
humidity are kept (See “Operating conditions” on page 26).
This product becomes hot during its use. Take enough care when
handling the product.
Do not attempt to service this product yourself, as opening or removing
covers may expose you to dangerous voltages and other hazards. Refer
all service to qualified service personnel.
z Do not use the product for a long time if the sound is distorted.
z Never listen to headphones at high volume, it may damage your
hearing.
z Make enough room for inserting or removing the power plug. Place the
product as close to an AC outlet as possible. The main power supply for
the product is controlled by inserting or removing the power plug.
z When the product is left unattended and unused for a long period of
time, unplug it from the wall outlet and disconnect the cable system.
z Do not overload wall outlets, extension cords, or convenience
receptacles on other equipment as this can result in a risk of fire or
electric shock.
z Slots and openings in the cabinet are provided for ventilation. These
ensure reliable operation of the product and protect it from overheating.
These openings must not be blocked or covered.
z Never push objects of any kind into this product through openings as
they may touch dangerous voltage points or short-circuit the parts,
which could result in a fire or electric shock.
z Never spill liquid of any kind on the product.
z Never place anything on the product. (Placing liquids, naked flames,
cloths, paper, etc. on the product may cause a fire.)
z Do not apply any strong shock to the LCD panel. (Do not hit any object
against it or push it with a sharp-pointed tool.)
z Do not put heavy objects on the product.
z Do not step on or hang on the product.
U.S.A. only
FCC NOTICE (U.S.A. only)
CAUTION:
Changes or modifications not approved by JVC could void the user’s
authority to operate the equipment.
NOTE:
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.
IMPORTANT
PREPARE
USE SETTING
TROUBLE?
2
Safety Precautions
3
U.S.A. only
IMPORTANT RECYCLING INFORMATION
This product has a fluorescent lamp that contains mercury. Disposal of
these materials may be regulated in your community due to environmental
considerations. For disposal or recycling information, please contact your
local authorities or for USA, the Electronic Industries Alliance:
http://www.eiae.org
IMPORTANT SAFETY INSTRUCTIONS
1) Read these instructions.
2) Keep these instructions.
3) Heed all warnings.
4) Follow all instructions.
5) Do not use this apparatus near water.
6) Clean only with dry cloth.
7) Do not block any ventilation openings. Install in accordance with the
manufacturer’s instructions.
8) Do not install near any heat sources such as radiators, heat registers,
stoves, or other apparatus (including amplifiers) that produce heat.
9) Do not defeat the safety purpose of the polarized or grounding-type plug.
A polarized plug has two blades with one wider than the other. A
grounding type plug has two blades and a third grounding prong. The
wide blade or the third prong are provided for your safety. If the provided
plug does not fit into your outlet, consult an electrician for replacement of
the obsolete outlet.
10) Protect the power cord from being walked on or pinched particularly at
plugs, convenience receptacles, and the point where they exit from the
apparatus.
11) Only use attachments/accessories specified by the manufacturer.
12) Use only with the cart, stand, tripod, bracket, or table
specified by the manufacturer, or sold with the
apparatus. When a cart is used, use caution when
moving the cart/ apparatus combination to avoid injury
from tip-over.
13) Unplug this apparatus during lightning storms or when
unused for long periods of time.
14) Refer all servicing to qualified service personnel. Servicing is required
when the apparatus has been damaged in any way, such as powersupply cord or plug is damaged, liquid has been spilled or objects have
fallen into the apparatus, the apparatus has been exposed to rain or
moisture, does not operate normally, or has been dropped.
15) Apparatus shall not be exposed to dripping or splashing and no objects
filled with liquids, such as vases, shall be placed on the apparatus.
16) Batteries shall not be exposed to excessive heat such as sunshine, fire or
the like.
17) When discarding batteries, environmental problems must be considered
and the local rules or laws governing the disposal of these batteries must
be followed strictly.
18) Avoid improper installation and never position the unit where good
ventilation is impossible. When installing this monitor, distance
recommendations must be maintained between the set and the wall, as
well as inside a tightly enclosed area or piece of furniture. Keep to the
minimum distance guidelines shown for safe operation.
200 (7 7/8)
150 (6) 50 (2)
19) When this monitor is connected to the wall outlet, it is always on standby
even when all the LED lamps are not lit. To shut down the monitor, unplug
the monitor from the wall outlet.
150 (6) Unit: mm (inch)50 (2)
European Union only
Dear Customer,
This apparatus is in conformance with the valid European directives and
standards regarding electromagnetic compatibility and electrical safety.
European representative of Victor Company of Japan, Limited is:
JVC Technical Services Europe GmbH
Postfach 10 05 04
61145 Friedberg
Germany
Information for Users on Disposal of Old Equipment
and Batteries
[European Union]
These symbols indicate that the electrical and electronic equipment
and the battery with this symbol should not be disposed of as
general household waste at its end-of-life. Instead, the products
should be handed over to the applicable collection points for the
recycling of electrical and electronic equipment as well as batteries
for proper treatment, recovery and recycling in accordance with your
national legislation and the Directive 2002/96/EC and 2006/66/EC.
By disposing of these products correctly, you will help to conserve
Products
Battery
Notice:
The sign Pb below
the symbol for
batteries indicates
that this battery
contains lead.
natural resources and will help to prevent potential negative effects
on the environment and human health which could otherwise be
caused by inappropriate waste handling of these products.
For more information about collection points and recycling of these
products, please contact your local municipal office, your household
waste disposal service or the shop where you purchased the product.
Penalties may be applicable for incorrect disposal of this waste, in
accordance with national legislation.
[Business users]
If you wish to dispose of this product, please visit our web page
http://www.jvc-eu/ to obtain information about the take-back of
the product.
[Other Countries outside the European Union]
These symbols are only valid in the European Union.
If you wish to dispose of these items, please do so in accordance
with applicable national legislation or other rules in your country for
the treatment of old electrical and electronic equipment and batteries.
IMPORTANT
PREPARE
USE SETTING
TROUBLE?
4
Maintenance
Unplug this product from the wall outlet before cleaning.
Screen
To avoid irreparable change in appearance of the screen such as uneven
color, discoloration, scratches, be careful about the following:
z Do not paste or stick anything using any glues or adhesive tapes.
z Do not write anything on the screen.
z Do not strike the screen with a hard object.
z Avoid condensation on the screen.
z Do not wipe the screen with any liquid such as water. In addition, wiping
the screen with water-diluted neutral detergent or solvent such as alcohol,
thinner, or bezine may affect the anti-reflection treatment of the screen.
z Do not wipe the screen forcefully.
If the screen gets stained, wipe it with a soft dry cloth.
Cabinet
To avoid the deterioration or damages of the cabinet such as its paint's
peeling away, be careful about the following:
z Do not wipe the cabinet using solvent such as alcohol, thinner, or benzine.
z Do not expose the cabinet to any volatile substance such as insecticides.
z Do not allow any rubber or plastic in contact for a long time.
z Do not wipe the cabinet forcefully.
Wipe stains off the cabinet with a soft cloth. If the cabinet gets heavily
stained, wipe it with a soft cloth soaked in water-diluted neutral detergent and
wrung well, then wipe with a soft dry cloth.
See “Handling the glossy finish of the monitor” (P. 8) on how to handle the
glossy finish.
Ventilation openings
Use a vacuum cleaner to get rid of the dust around the intakes (all the
openings). If a vacuum cleaner is not available, use a cloth and wipe it off.
Leaving the dust around the intakes may prevent proper temperature control
and cause damage to the product.
Glasses
If the glasses get stained, wipe it with a soft dry cloth.
Safety Precautions
5
Remote control
Switch between “TV / STB / DVD / AUDIO” (P. 15)
Switch between VIDEO devices
Volume control / Turn off muting
Display current input information
Change the aspect ratio (P. 14)
Turn on “Sound Effect” (P. 14)
z If the remote control doesn’t
work, confirm that the mode is
set to “TV”.
Mute
Turn on “Clear SD” (P. 18)
2%452.
#LEAR3$
466)$%/
VOL
TOP MENU
$)30,!9
ZOOM
MODE
ST
CH
CH
LCD
Turn on / off (standby) the monitor
IMPORTANT
Enter number
PREPARE
Color buttons
B
AUDIO
Display on-screen menu (P. 17)
Select and confirm settings in menus
VOL
Change external input
USE SETTING
To the previous screen
Select a 3D mode (P. 12)
Select a picture mode (P. 14)
TROUBLE?
Note
z For buttons that can be used to operate other devices, refer to
“Configuring your remote control” (P. 15).
z Buttons that are not explained in this manual does not function
with this monitor.
6
Names and functions of parts
VOL
CH
VOL
7
Touch sensor panel operation
Remote control
sensor
Power lamp
ON: Lit (Blue)
OFF: Unlit
z When “Power Lamp” is set to “Off”,
the power lamp will not light up.
g“Power Lamp” (P. 20)
Note
Peel off the protection films pasted on the glossy finish of the monitor after
the monitor has been placed properly. (P. 8)
Change the direction of monitor
Change external
input.
Volume
Turn on / off (standby)
the monitor.
Menu operation.
Switch to an external input. (P. 13)
z Touching and simultaneously switches the
monitor to 3D mode.
Touch on the function name to operate the function
VOL
z You will hear a beep if you have touched
the button correctly.
Operate the menus
Use as “MENU” button or “OK” button.
CH
Use as “ ” and “ ” buttons.
VOL
Use as “ ” and “ ” buttons.
z For details on menu operations, refer to “Customising your monitor”
(P. 17).
Attach the stand to the monitor
1
To prevent scratches on the panel, lay a piece of soft cloth on an even
platform and place the monitor onto it.
2
Note
z When the stand is not used:
Seal up the two holes at the bottom of the TV using
the plates provided. Peel off the protection films on
the plates. Then peel the plates from the paper and
stick them on the holes.
Handling the glossy finish of the monitor
Be careful when handling the glossy finish of the monitor
The glossy finish of the monitor scratches easily.
z Protection films have been pasted onto the glossy finish of the monitor to
prevent scratches. Peel off the films after the monitor has been placed
properly.
z If the glossy finish gets dirty, clear the dust off the glossy finish first. Then
wipe softly with the cleaning cloth provided. If you do not clear the dust
first, or you wipe the glossy finish too hard, or a cleaning cloth other than
the one provided is used, the glossy finish may be scratched.
IMPORTANT
PREPARE
USE SETTING
Glossy finish
TROUBLE?
8
Getting started
Please read P. 10 of this manual to set up your monitor.
Check accessories
Remote control
Cleaning cloth
(For details on using the
cleaning cloth, see P. 8.)
Circular polarizing glasses
(x2)
(For viewing 3D images)
WARNING:
Batteries shall not be exposed to
excessive heat such as direct
sunshine, fire or the like.
“AAA/R03” Batteries
(For confirming the
monitor works)
Install your monitor
Follow the instructions on page 8 to attach the stand provided to the monitor.
z Place the monitor on a flat and stable location.
Power requirements
z Connect the power cord only to a 100 - 240 V, 50/60 Hz AC outlet.
Installation requirements
z To prevent the monitor from falling, thread the belt through the hole on the
back of the stand and secure it to the rack, etc.
Hole
9
z Stand, stand cover, screws and plates are also included. For details, refer
to page 8.
Belt and screw (not provided)
Insert the batteries
Use two “AAA/R03” dry cell batteries. Insert the batteries from the - end,
making sure the + and - polarities are correct.
Loading...