JVC GD-19L1G, GD-17L1G User Manual
INSTRUCTIONS
LCD DISPLAY MONITOR
GD-19L1G
GD-17L1G
Thank you for purchasing this JVC LCD display monitor. Before using it, read
and follow all instructions carefully to take full advantage of the monitor’s
capabilities.
(* “LCD” stands for Liquid Crystal Display.)
ENGLISH
For Customer Use:
Enter below the Serial No. which is located on the rear of the cabinet. Retain this
information for future reference.
Model No. : GD-19L1G，GD-17L1G Serial No. :
Contents
Safety Precautions .................................................................................................... 3
Installation.................................................................................................................. 6
Unpacking the Monitor................................................................................................. 6
Setup ........................................................................................................................... 6
Controls and Features................................................................................................. 8
Remote control buttons and functions.................................................................... 10
Using Your Monitor .................................................................................................. 11
Turning the Monitor On and Off ................................................................................. 11
Caring for and Cleaning the Monitor............................................................................. 11
Connecting the monitor to the PC .............................................................................. 11
Using the Menu ........................................................................................................ 12
Menu Operation........................................................................................................... 12
Using the Monitor in the PC mode........................................................................... 17
Basic Connection Example ..................................................................................... 20
Troubleshooting ....................................................................................................... 21
Specifications ............................................................................................................ 22
2
Safety Precautions
In order to prevent any fatal accidents caused by disoperation or mishandling the monitor, be fully aware of all the
following precautions.
WARNINGS
To prevent fire or shock hazard, do not expose this monitor to rain or moisture. Dangerous high voltages are present
inside the unit. Do not remove the back cover of the cabinet. When servicing the monitor, consult qualified service
personnel. Never try to service it yourself.
WARNING: THIS APPARATUS MUST BE EARTHED.
This monitor is equipped with a 3-blade grounding-type plug to satisfy FCC rule. If you are unable to insert the
plug into the outlet, contact your electrician.
FCC INFORMATION (U.S.A. only)
ENGLISH
CAUTION: Changes or modification not approved by JVC could void the user's authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and,
if not installed and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of the following
measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.
PRECAUTIONS
● Use only the power source specified on the unit.
●The ' ‘(power) button on the monitor or 'POWER OFF' button on the remote control does not fully isolate the
monitor from the AC supply. If you are not going to use the monitor for a long period, be sure to disconnect the
power plug from the AC outlet. The AC outlet shall be installed near the equipment and shall be easily accessible.
● Do not allow anything to rest on the power cord. And do not place this unit where people will tread on the cord. Do
not overload wall outlets or power cords as this can result in a fire or electric shock.
● Avoid using this unit under the following conditions:
– in extremely hot, cold or humid places,
– in dusty places,
– near appliances generating strong magnetic fields,
3
– in places subject to direct sunlight,
– in badly ventilated places,
– in automobiles with doors closed.
● Do not cover the ventilation slots while in operation as this could obstruct the required ventilation flow.
● When dust accumulates on the screen surface, clean it with a soft cloth.
● Unplug this unit from the AC outlet and refer servicing to qualified service personnel under the following conditions:
– when the power cord is frayed or the plug is damaged,
– if liquid has been spilled into the unit,
– if the unit has been dropped or the cabinet has been damaged,
– when the unit exhibits a distinct change in performance.
● Do not attempt to service this unit yourself as opening or removing covers may expose you to dangerous voltage or
other hazards. Always refer servicing to qualified service personnel.
● When replacement parts are required, have the service personnel verify in writing that the replacement parts
he/she uses have the same safety characteristics as the original parts. Use of manufacture’s specified
replacement parts can prevent fire, shock, or other hazards.
● Upon completion of any servicing or repair work to this unit, please ask the service personnel to perform the safety
check described in the manufacturer’s service literature.
POWER CONNECTION
The power supply voltage rating of this product is AC 120 V and AC 220~240 V, the power cord attached conforms to
the following power supply voltage and countries. Use only the power cord designated to ensure Safety and EMC
regulations of each countries.
Power cord
Power supply voltage : AC 120 V AC 220~240 V AC 220~240 V
Countries : U.S.A. and Canada European and Asian countries United Kingdom
Warning:
● Do not use the same Power Cord for AC 120 V as for AC 220~240 V. Doing so may cause malfunction, electric
shock or fire.
Note for the United Kingdom power cord only
The plug on the United Kingdom power cord has a built-in fuse. When replacing the fuse, be sure to use only a
correctly rated approved type, re-fit the fuse cover. (Consult your dealer or qualified service personnel.)
How to replace the fuse
Open the fuse compartment with the blade screw driver,
And replace the fuse.
(* An example is shown in the illustration.)
4
Fuse
Information for Users on Disposal of Old Equipment
[European Union]
This symbol indicates that the electrical and electronic equipment should not be disposed
as general household waste at its end-of-life. Instead, the product should be handed over
to the applicable collection point for the recycling of electrical and electronic equipment for
proper treatment, recovery and recycling in accordance with your national legislation.
By disposing of this product correctly, you will help to conserve natural resources and will
help prevent potential negative effects on the environment and human health which could
otherwise be caused by inappropriate waste handling of this product. For more information
about collection point and recycling of this product, please contact your local municipal
Attention:
This symbol is
only valid in the
European Union.
office, your household waste disposal service or the shop where you purchased the
product.
Penalties may be applicable for incorrect disposal of this waste, in accordance with
national legislation.
(Business users)
If you wish to dispose of this product, please visit our web page www.jvc-europe.com
to obtain information about the take-back of the product.
[Other Countries outside the European Union]
If you wish to dispose of this product, please do so in accordance with applicable
national legislation or other rules in your country for the treatment of old electrical and
electronic equipment.
ENGLISH
5
Installation
Please follow the instructions in this chapter to install your LCD Monitor.
Note: Before connecting your monitor, first read through the instructions in this chapter and the safety precautions in
the previous chapter.
Unpacking the Monitor
When you are unpacking the monitor, make sure that you have the following items:
Ö The LCD monitor
Ö AC power cord
Ö Analog video signal cable
Ö Remote control
Ö Battery x 2
Ö BNC-RCA adaptor
Ö This instruction book
Note: Place the monitor on a flat, sturdy surface. Choose an area free from excessive heat, moisture, and sunlight.
Setup
Note：
● Please do not lay your elbow and lean on this monitor.
● Please do not hold the liquid crystal part when you set it up.
● If the installation is imperfect, the monitor may fall down and cause the injury and the breakdown etc.
Stand method of STAND
● Please hold down the rear of the monitor firmly.
● Please pave the cloth etc. so as not to damage the liquid crystal panel.
● When tilting the monitor, make sure the following.
-Tilt it slowly holding the stand firmly.
-Do not hold the liquid crystal part.
-Be careful not to get your fingers caught between the monitor and the stand.
6
Installation on wall
This monitor can be installed on walls with Wall Mounting Unit (TS-CV10WG) made by JVC of another sales.
Moreover, another wall mounting unit, in accordance with VESA standard on markets can be also used.
Note：
● Please request the installation on the wall to a special engineer.
When installing a wall mounting unit in the rear of the monitor , detach the stand according to the following procedure.
1. Detach the hinge cover in the rear of the monitor.
VESA mounting holes
ENGLISH
Hinge cover
2. Detach the stand by detaching the screws which fix the stand.
3. Attach the hinge cover detached in step1.
Note for when installing the monitor on the wall by using the VESA mounting holes on the rear of the
monitor:
Depending on the wall mounting unit which you use, the hinge cover may hit the wall when you tilt the monitor
forward. In that case, detach the hinge cover.
7
Controls and Features
9
□1 '＋' and '－' buttons
□2 ‘MENU’ button
□3 Down ( ▼ ) button
□4 Up ( ▲ ) button
□5 INPUT
□6 Power ( ) button
8
7
1 2 3 4 5
Press these buttons to adjust the sound volume.
When a menu appears, use these buttons for menu operation. (see page 12).
Use this button for menu operation. (See page 12)
Use this button for menu operation. (See page 12)
Use this button for menu operation. (See page 12)
Starts the "AUTO ADJUST" in the PC mode when no menu appears.(See page
17)
Select either PC、Video、Y/C and Component input signal.
Turns the monitor on or off (standby).
6
□7 Power indicator
□8 Remote control sensor
□9 Speaker
Lights in green when the monitor is on.
Light in amber when the monitor is off (standby).
When no signal is input or the input signal is out of range, the Power indicator
blinks in amber.
Receives the control signals from the Remote control
built-in speaker is located inside on the front panel of the display.
8
Loading...