JVC GC-FM1 Detailed User Guide
HD MEMORY CAMERA
LYT2154-002B
EN
GC-FM1
U/E/AA
Detailed User Guide
ENGLISH
2
Safety Precautions
IMPORTANT:
In the event that any of the following occur, make a
request for repair to the dealer.
• Smoke or abnormal odor is emitted.
• Damage from being dropped.
• Water or an object enters inside.
If malfunctioning occurs, stop using the unit
immediately and consult your local JVC dealer.
Caution on camcorder
The camcorder may present a re or chemical burn
hazard if mistreated. Do not disassemble, heat above
100 °C or incinerate.
• Dispose of used camcorder promptly.
• Do not disassemble and do not dispose of in re.
WARNING:
The camcorder shall not be exposed to excessive heat
such as direct sunshine, re or the like.
Declaration of Conformity
(For owners in the U.S.A.)
Model Number : GC-FM1U
Trade Name : JVC
Responsible party : JVC AMERICAS CORP.
Address : 1700 Valley Road Wayne, N. J.
Telephone Number : 973-317–5000
This device complies with Part 15 of FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received,
including interference that may cause undesired
operation.
(For owners in the U.S.A.)
Changes or modications not approved by JVC could
void the user’s authority to operate the equipment.
This equipment has been tested and found to
comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against
harmful interference in a residential installation. This
equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However, there
is no guarantee that interference will not occur in a
particular installation. If this equipment does cause
harmful interference to radio or television reception,
which can be determined by turning the equipment
o and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and
receiver.
Connect the equipment into an outlet on a circuit
dierent from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV
technician for help.
07470
FCC WARNING
(For owners in the U.S.A.)
This equipment may generate or use radio
frequency energy. Changes or modications to this
equipment may cause harmful interference unless
the modications are expressly approved in the
instruction manual. The user could lose the authority
to operate this equipment if an unauthorized change
or modication is made.
(For owners in the U.S.A.)
• The supplied interface cable must be used with the
equipment in order to comply with the limits for a
digital device pursuant to Subpart B of Part 15 of
FCC Rules.
• Use an HDMI cable with the HDMI logo.
(For owners in Canada)
This Class B digital apparatus complies with Canadian
ICES-003.
Cet appareil numérique de la classe B est conforme à
la norme NMB-003 du Canada.
Information for Users on Disposal of Old
Equipment and Batteries
Products
[European Union]
These symbols indicate that the electrical and
electronic equipment and the battery with this symbol
should not be disposed of as general household
waste at its end-of-life. Instead, the products should
be handed over to the applicable collection points for
the recycling of electrical and electronic equipment
as well as batteries for proper treatment, recovery and
recycling in accordance with your national legislation
and the Directive 2002/96/EC and 2006/66/EC.
By disposing of these products correctly, you will help
to conserve natural resources and will help to prevent
potential negative eects on the environment and
human health which could otherwise be caused by
inappropriate waste handling of these products.
For more information about collection points and
recycling of these products, please contact your local
municipal oce, your household waste disposal
service or the shop where you purchased the product.
Penalties may be applicable for incorrect disposal of
this waste, in accordance with national legislation.
[Business users]
If you wish to dispose of this product, please visit our
web page www.jvc-europe.com to obtain information
about the take-back of the product.
[Other Countries outside the European Union]
These symbols are only valid in the European Union.
If you wish to dispose of these items, please do so in
accordance with applicable national legislation or
other rules in your country for the treatment of old
electrical and electronic equipment and batteries.
Notice:
The sign Pb below the symbol
for batteries indicates that this
battery contains lead.
Battery
3
If this symbol is shown, it is only valid in
the European Union.
Dear Customer, [European Union]
This apparatus is in conformance with the valid
European directives and standards regarding
electromagnetic compatibility and electrical safety.
European representative of Victor Company of Japan,
Limited is:
JVC Technical Services Europe GmbH
Postfach 10 05 04
61145 Friedberg
Germany
SOME DO’S AND DON’TS ON THE SAFE USE OF
EQUIPMENT
This equipment has been designed and manufactured
to meet international safety standards but, like any
electrical equipment, care must be taken if you are to
obtain the best results and safety is to be assured.
DO read the operating instructions before you attempt to use
the equipment.
DO ensure that all electrical connections (including the mains
plug, extension leads and interconnections between pieces
of equipment) are properly made and in accordance with
the manufacturer’s instructions. Switch o and withdraw the
mains plug when making or changing connections.
DO consult your dealer if you are ever in doubt about the
installation, operation or safety of your equipment.
DO be careful with glass panels or doors on equipment.
DON’T continue to operate the equipment if you are in any
doubt about it working normally, or if it is damaged in any
way — switch o, withdraw the mains plug and consult your
dealer.
DON’T remove any xed cover as this may expose dangerous
voltages.
DON’T leave equipment switched on when it is unattended
unless it is specically stated that it is designed for
unattended operation or has a standby mode. Switch o
using the switch on the equipment and make sure that your
family knows how to do this. Special arrangements may need
to be made for inrm or handicapped people.
DON’T use equipment such as personal stereos or radios so
that you are distracted from the requirements of road safety.
It is illegal to watch television whilst driving.
DON’T listen to headphones at high volume, as such use can
permanently damage your hearing.
DON’T obstruct the ventilation of the equipment, for example
with curtains or soft furnishings. Overheating will cause
damage and shorten the life of the equipment.
DON’T use makeshift stands and NEVER x legs with
wood screws — to ensure complete safety always t the
manufacturer’s approved stand or legs with the xings
provided according to the instructions.
DON’T allow electrical equipment to be exposed to rain or
moisture.
ABOVE ALL
• NEVER let anyone especially children push anything
into holes, slots or any other opening in the case — this
could result in a fatal electrical shock;
• NEVER guess or take chances with electrical equipment
of any kind — it is better to be safe than sorry!
Safety Precautions for the Camcorder
To reduce the risk of re, electrical shock, and injury to
person, carefully follow these instructions.
• Do not expose this product to liquid, rain, moisture, or
extreme temperatures.
• Do not disassemble this unit.
• Do not insert foreign objects into the this unit - this
may cause damage to internal components or cause
injury to you.
• It is recommended to charge the battery connecting to
PC with the USB cable.
• Do not charge this product if damaged, or has been
immersed in liquids.
• Do not store this unit in extreme cold or high
temperature areas.
• If the LCD breaks, do not touch the glass or liquid.
• Do not attempt to remove or replace the battery.
•
Do not attempt to disassemble or repair the camcorder.
• Do not puncture or incinerate the battery.
• Do not dispose of this unit improperly. Check with local
codes for proper disposal regulations.
• Dispose of batteries according to local and national
regulations.
• Never allow children to play with this unit small parts
may be a choking hazard.
• Observe caution when using this unit strap to prevent
strangulation.
• When using the camcorder with a tripod, attach the
camcorder to the tripod securely.
Product Care
• Operating and storage temperatures 5 °C to +40 °C
• Do not drop this unit or subject it to excessive shock or
vibration.
• Do not use liquid or aerosol cleaners, as they may
damage the unit or the nish of the product.
• KEEP THIS INSTRUCTIONS FOR FUTURE REFERENCE.
CAUTION:
• Dispose of used batteries according to the instructions.
• Risk of explosion if battery is replaced by an incorrect
type.
ATTENTION:
On placing the unit: Some TVs or other appliances
generate strong magnetic elds. Do not place such
appliances on top of the unit as it may cause picture
disturbance.
Remember that this camcorder is intended for
private consumer use only.
Any commercial use without proper permission is prohibited.
(Even if you record an event such as a show, performance
or exhibition for personal enjoyment, it is strongly
recommended that you obtain permission beforehand.)
Trademarks
• HDMI is a trademark of HDMI
Licensing, LLC.
• Windows® is either registered trademark or
trademark of Microsoft Corporation in the United
States and/or other countries.
• Macintosh is a registered trademark of Apple Inc.
• iPod, iTunes are trademarks of Apple Inc., registered
in the U.S. and other countries.
• YouTube and the YouTube logo are trademarks
and/or registered trademarks of YouTube LLC.
• Other product and company names included in
this instruction manual are trademarks and/or
registered trademarks of their respective holders.
4
Table of Contents
Names of Components ........................... 5
Accessories
Attaching the Hand Strap
Indications on LCD monitor
Charging
Turning the Power On and O
Inserting an SD Card
Necessary Settings before Use
Setting Date and Time
Setting the Video Output
Viewing the rmware version of the unit
Formatting an SD Card
...................................... 6
......................... 6
....................... 6
........................................ 9
................... 10
............................10
................... 11
! Recording/Playback .......................... 14
Video Recording
Video Playback
# Recording/Playback .......................... 15
Still Image Recording
Still Image Playback
Deleting Files ................................... 16
Viewing Files on TV
............................. 17
Saving Files on a Computer . . . . . . . . . . . . . . . . . . . . . . 18
System Requirements (Windows)
Installing the Supplied Software
Exporting to iTunes®
Uploading to YouTube
Warning Indications
Specications
................................... 24
............................ 21
TM
......................... 22
............................. 23
Customer Support Information
................ 19
.................20
.................. 26
5
Names of Components
Focus Switching Lever
Normal Recording [M]
Macro Recording [
Power Button [<]
Power Lamp
Select Button [%]
Recording/Playback
]
LCD Monitor
Charge Lamp
Status (Warning) Lamp
Recording Select Button
Video [!]
Still Image [#]
Delete Button [$]
Hand Strap
Attachment Area
AV Connector
HDMI Connector
USB Connector
Speaker
SD Slot Cover
Tripod Mounting
Socket
, ¢ , £ , ¤ Buttons
¡
Zoom Buttons
Volume Buttons
Index Button [7]
Reset Hole
Recording Start/Stop Button
Shutter Button
Set Button
Lens
Microphone
6
Accessories
USB Cable
(WUU102SCP001)
(WPU122SCP001)
Hand StrapAV Cable
Attaching the Hand Strap
To guard against dropping the camcorder, we recommend attaching the
hand strap.
NOTE
• When carrying the camcorder, please be careful
not to drop it. Dropping it may cause injury or a
malfunction of your camcorder.
• When a child uses the camcorder, there must be
parental guidance.
Indications on LCD monitor
Index 8
! Videos / # Still Images
Mode Indicator Folder Number_File Number
Current Page/
Total Number of Pages
To delete/redisplay 8
characters and symbols
on the LCD monitor
Press the 7 button for more
than 2 seconds.
1080p
REC
00h59
m
01:11
T
W
8
M
3095
T
W
7
Indications on LCD monitor (Continued)
During Recording 8
! Video
Mode Indicator
1080p/720p/VGA/
QVGA
Macro Recording
Battery Indicator
Display changes depending on
the remaining battery level
# Still image
Remaining Time
CounterVideo Quality
Zoom Bar
W: Wide side, T: Tele side
Mode Indicator Remaining Number of Shots
8M/5M/2M/VGA
Macro Recording
Image Size
Zoom Bar
W: Wide side, T: Tele side
1080p
01:48
103_0050
00:20
8
M
103_0050
8
Indications on LCD monitor (Continued)
During Playback 8
! Video
Folder Number_File Number
Video Quality
1080p/720p/VGA/
QVGA
# Still image
Recording Time
Playback Time
(minutes : seconds)
Playback Mode
F : Playback
N : Reverse search
O : Forward search
Q : Pause
Volume Indicator
Folder Number_File Number
8M/5M/2M/VGA
Image Size
9
Charging
Charge the battery connecting to the computer with the USB cable.
Charge Lamp
< Button
Power Lamp
To Computer
USB Cable
Press the < button to turn o the camcorder.
1
USB Connector
The power lamp goes out.
Connect the camcorder to a computer.
2
Camcorder’s LCD monitor will turn o when the USB cable is connected.
This occurs during battery charging or when connected to a PC.
Charge lamp
Charging time approx. 180 minutes
turns on: Charging
goes out: Charging nished
When the charging is nished, disconnect the camcorder from the computer.
NOTE
• Charging is not possible while the camcorder is turned on.
• Make sure that the computer is turned on during charging.
• The camcorder is not charged when it is shipped. Charge the camcorder before using it for
the rst time.
• If there is a trouble in charging, the charge lamp/warning lamp blinks in green. Connect the
camcorder to the computer again.
Battery Indicator 8
Blinking
Fully charged
Medium
Very low
Recharge the battery at an early opportunity.
Empty
The camcorder will turn o. Recharge the battery immediately.
Loading...