JVC DLA-HD550WE User Manual

0809TTH-AO-AO

DLA-HD550

D-ILA PROJECTOR

PROYECTOR D-ILA

PROJECTEUR D-ILA

FOR SERVICING(Only in U.S.A)

TO OUR VALUED CUSTOMER

THANK YOU FOR PURCHASING THIS JVC PRODUCT.

WE WANT TO HELP YOU ACHINEVE A PERFECT EXPERINCE.

NEED HELP ON HOW TO HOOK UP? NEED ASSISTANCE ON HOW TO OPERATE? NEED TO LOCATE A JVC SERVICE CENTER? LIKE TO PURCHACE ACCESSORIES?

IS HERE TO HELP!

TOLL FREE: 1(800)252-5722

http://www.jvc.com

Remember to retain your Bill of Sale for Warranty Service.

DO not attempt to service the product yourself

Caution

To prevent electrical shock,do not open the cabinet. There are no user serviceable parts inside. Please refer to qualified service personnel for repairs.

ENGLISH FRANÇAIS ESPAÑOL/CASTELLANO

DLA-HD550

INSTRUCTIONS

Getting Started

MANUEL D’INSTRUCTIONS

MANUAL DE INSTRUCCIONES

D-ILA PROJECTOR PROJECTEUR D-ILA

PROYECTOR D-ILA

Preparation

DLA-HD550

Basic Operation

For Customer use :

Enter below the serial No. which is located on the side of the cabinet. Retain this information for future reference.

Model No. DLA-HD550

Serial No.

Pour utilisation par le client :

Entrer ci-dessous le N° de série qui est situé sous le boîtier. Garder cette information comme référence pour le futur.

N° de modèle DLA-HD550

N° de série

Instrucción para el cliente :

Introduzca a continuación el nº de serie que aparece en la parte inferior lateral de la caja. Conserve esta información como referencia para uso ulterior.

Modelo Nº DLA-HD550

Nº de serie

Settings

Troubleshooting

Others

PC007280999-1

1

or similar surface. It should not be placed in a built-in installation

-

To allow better heat dissipation, keep a clearance between this unit and its surrounding as shown below. When this unit is enclosed in a space of dimensions as shown below, use an air-conditioner so that the internal and external temperatures are the same. Overheating can cause damage.

- the type of power supply to your home, consult your product dealer or local power company.

- This product is equipped with a three-wire plug. This plug will fit only into a grounded power outlet. If you are unable to insert the plug into the outlet, contact your electrician to install the proper outlet. Do not defeat the safety purpose of the grounded plug.

- Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them. Pay particular attention to cords at doors, plugs, receptacles, and the point where they exit from the product.

- For added protection of this product during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the cable system. This will prevent damage to the product due to lightning and power line surges.

- Do not overload wall outlets, extension cords, or convenience receptacles on other equipment as this can result in a risk of fire or electric shock.

- Never push objects of any kind into this product through openings as they may touch dangerous voltage points or short out parts that could result in a fire or electric shock. Never spill liquid of any kind on the product.

- Do not attempt to service this product yourself as opening or removing covers may expose you to dangerous voltages and other hazards. Refer all service to qualified service personnel.

-

Unplug this product from the wall outlet and refer service to

qualified service personnel under the following conditions:

a) When the power supply cord or plug is damaged.

b) If liquid has been spilled, or objects have fallen on the product.

c) If the product has been exposed to rain or water. d) If the product does not operate normally by following the

operating instructions. Adjust only those controls that are covered by the Operation Manual, as an improper adjustment of controls may result in damage and will often require extensive work by a qualified technician to restore the product

to normal operation. e) If the product has been dropped or damaged in any way. f) When the product exhibits a distinct change in performance -

this indicates a need for service.

- When replacement parts are required, be sure the service technician has used replacement parts specified by the manufacturer or with same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock, or other hazards.

-

Upon completion of any service or repairs to this product, ask the service technician to perform safety checks to determine that the product is in proper operating condition.

- The product should be placed more than one foot away from heat sources such as radiators, heat registers, stoves, and other products (including amplifiers) that produce heat.

- When connecting other products such as VCR’s, and DVD players, y

ou should turn off the power of this product for

protection against electric shock.

- Do not place combustibles behind the cooling fan. For example, cloth, paper, matches, aerosol cans or gas lighters that present special hazards when over heated.

- Do not look into the projection lens while the illumination lamp is turned on. Exposure of your eyes to the strong light can result in impaired eyesight.

- Do not look into the inside of this unit through vents (ventilation holes), etc. Do not look at the illumination lamp directly by opening the cabinet while the illumination lamp is turned on. The illumination lamp also contains ultraviolet rays and the light is so powerful that your eyesight can be impaired.

- Do not drop, hit, or damage the light-source lamp (lamp unit) in any way. It may cause the light-source lamp to break and lead to injuries. Do not use a damaged light source lamp. If the light-source lamp is broken, ask your dealer to repair it. Fragments from a broken light-source lamp may cause injuries.

- The light-source lamp used in this projector is a high pressure mercury lamp. Be careful when disposing of the light-source lamp. If anything is unclear, please consult your dealer.

- Do not ceiling-mount the projector to a place which tends to vibrate; otherwise, the attaching fixture of the projector could be broken by the vibration, possibly causing it to fall or overturn, which could lead to personal injury.

- Use only the accessory cord designed for this product to prevent shock.

*DO NOT allow any unqualified person to install the

unit.

Be sure to ask your dealer to install the unit (e.g. attaching it to the ceiling) since special technical knowledge and skills are required for installation. If installation is performed by an unqualified person, it may cause personal injury or electrical shock.

power source indicated on the label. If you are not sure of

150 mm and above

300 mm and above

200 mm and above

300 mm and above

Safety Precautions

IMPORTANT INFORMATION

Th is p ro du ct h as a H ig h In te ns it y Discharge (HID) lamp that contains mercur

Disposal of these materials may be regulated in your community due to

Getting started

y.

env ironmental co nsi derations. Fo r disposal or recycling information, please contact your local authorities or for USA, the Electronic Industries Alliance: http://www.eiae.org.

WARNING:

TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

WARNING:

THIS APPARATUS MUST BE EARTHED.

CAUTION:

To reduce the risk of electric shock, do not remove cover. Refer servicing to qualified service personnel.

This projector is equipped with a 3-blade grounding type plug to satisfy FCC rule. If you are unable to insert the plug into the outlet, contact your electrician.

FCC INFORMATION (U.S.A. only)

CAUTION:

Changes or modification not approved by JVC could void the user’s authority to operate the equipment.

NOTE:

This equipment has been tested and found to comply with the limits for Class B digital devices, pursuant to Part 15 of the FCC Rules. These limits are designed to provid e r ea so na b le p ro te ct i on a ga in s t ha rm fu l interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encourage to try to correct the interference by one or more of the following measures:

● Reorient or relocate the receiving antenna.

● Increase the separation between the equipment and

receiver.

● Connect the equipment into an outlet on a circuit different

from that to which the receiver is connected.

● Consult the dealer or an experienced radio/TV technician

for help.

2

MACHINE NOISE INFORMATION (Germany only)

Changes Machine Noise Information Ordinance 3. GSGV, January 18, 1991: The sound pressure level at the operator position is equal or less than 20 dB (A) according to ISO 7779.

About the installation place

Do not install the projector in a place that cannot support its weight securely.

If the installation place is not sturdy enough, the projector could fall or overturn, possibly causing personal injury.

IMPORTANT SAFEGUARDS

Electrical energy can perform many useful functions. This unit has been engineered and manufactured to assure your personal safety. But IMPROPER USE CAN RESULT IN POTENTIAL ELECTRICAL SHOCK OR FIRE HAZARD. In order not to defeat the safeguards incorporated into this product, observe the following basic rules for its installation, use and service. Please read these Important Safeguards carefully before use.

- All the safety and operating instructions should be read before the product is operated.

- The safety and operating instructions should be retained for future reference.

- All warnings on the product and in the operating instructions should be adhered to.

- All operating instructions should be followed.

- Place the projector near a wall outlet where the plug can be easily unplugged.

- Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning.

- Do not use attachments not recommended by the product manufacturer as they may be hazardous.

- Do not use this product near water. Do not use immediately after moving from a low temperature to high temperature, as this causes condensation, which may result in fire, electric shock, or other hazards.

- Do not place this product on an unstable cart, stand, or table. The product may fall, causing serious injury to a child or adult, and serious damage to the product. The product should be mounted according to the manufacturer’s instructions, and should use a mount recommended by the manufacturer.

- When the product is used on a cart, care should be taken to avoid quick stops, excessive force, and uneven surfaces which may cause the product and cart to overturn, damaging equipment or causing possible injury to the operator.

- Slots and openings in the cabinet are provided for ventilation. These ensure reliable operation of the product and protect it from overheating. These openings must not be blocked or covered. (The openings should never be blocked by placing the product on bed, sofa, rug,

such as a bookcase or rack unless proper ventilation is provided and the manufacturer’s instructions have been adhered to.)

PORTABLE CART WARNING (symbol provided by RETAC)

S3126A

-

To allow better heat dissipation, keep a clearance between this unit and its surrounding as shown below. When this unit is enclosed in a space of dimensions as shown below, use an air-conditioner so that the internal and external temperatures are the same. Overheating can cause damage.

150 mm and above

300 mm and above

150 mm and above

power source indicated on the label. If you are not sure of

the type of power supply to your home, consult your product dealer or local power company.

- This product is equipped with a three-wire plug. This plug will fit only into a grounded power outlet. If you are unable to insert the plug into the outlet, contact your electrician to install the proper outlet. Do not defeat the safety purpose of the grounded plug.

- Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them. Pay particular attention to cords at doors, plugs, receptacles, and the point where they exit from the product.

- For added protection of this product during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the cable system. This will prevent damage to the product due to lightning and power line surges.

- Do not overload wall outlets, extension cords, or convenience receptacles on other equipment as this can result in a risk of fire or electric shock.

- Never push objects of any kind into this product through openings as they may touch dangerous voltage points or short out parts that could result in a fire or electric shock. Never spill liquid of any kind on the product.

- Do not attempt to service this product yourself as opening or removing covers may expose you to dangerous voltages and other hazards. Refer all service to qualified service personnel.

-

Unplug this product from the wall outlet and refer service to

qualified service personnel under the following conditions:

a) When the power supply cord or plug is damaged.

b) If liquid has been spilled, or objects have fallen on the product.

c) If the product has been exposed to rain or water. d) If the product does not operate normally by following the

operating instructions. Adjust only those controls that are covered by the Operation Manual, as an improper adjustment of controls may result in damage and will often require extensive work by a qualified technician to restore the product

to normal operation. e) If the product has been dropped or damaged in any way. f) When the product exhibits a distinct change in performance -

this indicates a need for service.

- When replacement parts are required, be sure the service technician has used replacement parts specified by the manufacturer or with same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock, or other hazards.

300 mm and above

200 mm and above

ENGLISH

-

Upon completion of any service or repairs to this product, ask the service technician to perform safety checks to determine that the product is in proper operating condition.

- The product should be placed more than one foot away from heat sources such as radiators, heat registers, stoves, and other products (including amplifiers) that produce heat.

- When connecting other products such as VCR’s, and DVD players, y protection against electric shock.

- Do not place combustibles behind the cooling fan. For example, cloth, paper, matches, aerosol cans or gas lighters that present special hazards when over heated.

- Do not look into the projection lens while the illumination lamp is turned on. Exposure of your eyes to the strong light can result in impaired eyesight.

- Do not look into the inside of this unit through vents (ventilation holes), etc. Do not look at the illumination lamp directly by opening the cabinet while the illumination lamp is turned on. The illumination lamp also contains ultraviolet rays and the light is so powerful that your eyesight can be impaired.

- Do not drop, hit, or damage the light-source lamp (lamp unit) in any way. It may cause the light-source lamp to break and lead to injuries. Do not use a damaged light source lamp. If the light-source lamp is broken, ask your dealer to repair it. Fragments from a broken light-source lamp may cause injuries.

- The light-source lamp used in this projector is a high pressure mercury lamp. Be careful when disposing of the light-source lamp. If anything is unclear, please consult your dealer.

- Do not ceiling-mount the projector to a place which tends to vibrate; otherwise, the attaching fixture of the projector could be broken by the vibration, possibly causing it to fall or overturn, which could lead to personal injury.

- Use only the accessory cord designed for this product to prevent shock.

ou should turn off the power of this product for

*DO NOT allow any unqualified person to install the

unit.

Be sure to ask your dealer to install the unit (e.g. attaching it to the ceiling) since special technical knowledge and skills are required for installation. If installation is performed by an unqualified person, it may cause personal injury or electrical shock.

Getting Started

Preparation

Basic Operation

Settings

Troubleshooting

Others

3

1

Safety Precautions (Continued)

POWER CONNECTION

WARNING: Do not cut off the main plug from this equipment.

If the plug fitted is not suitable for the power points in your home or the cable is too short to reach a power point, then obtain an appropriate safety approved extension lead or adapter or consult your dealer. If nonetheless the mains plug is cut off, dispose of the plug immediately, to avoid a possible shock hazard by inadvertent connection to the main supply. If a new main plug has to be fitted, then follow the instruction given below.

WARNING: THIS APPARATUS MUST BE EARTHED.

For USA and Canada only Use only the following power cord.

Power cord

The power supply voltage rating of this product is AC110V – AC240V. Use only the power cord designated by our dealer to ensure Safety and EMC.

Ensure that the power cable used for the projector is the correct type for the AC outlet in your country. Consult your product dealer.

Power cord

For United Kingdom For European continent countries

IMPORTANT (Europe only):

The wires in the mains lead on this product are colored in accordance with the following cord: Green-and-yellow : Earth Blue : Neutral Brown : Live As these colors may not correspond with the colored making identifying the terminals in your plug, proceed as follows: The wire which is colored green-and-yellow must be connected to the terminal which is marked M with the letter E or the safety earth or colored green or greenand-yellow. The wire which is colored blue must be connected to the terminal which is marked with the letter N or colored black. The wire which is colored brown must be connected to the terminal which is marked with the letter L or colored red.

POWER CONNECTION

(United Kingdom only)

HOW TO REPLACE THE FUSE:

When replacing the fuse, be sure to use only a correctly rated approved type, re-fit the fuse cover.

IF IN DOUBT —— CONSULT A COMPETENT ELECTRICIAN.

Open the fuse compartment with the blade screwdriver, and replace the fuse. (* An example is shown in the illustration below.)

Fuse

Getting started

4

ENGLISH

Dear Customer,

This apparatus is in conformance with the valid European directives and standards regarding electromagnetic compatibility and electrical safety.

European representative of Victor Company of Japan, Limited is: JVC Technical Services Europe GmbH Postfach 10 05 04 61145 Friedberg Germany

Getting Started

Preparation

Basic Operation

Settings

Troubleshooting

Others

5

1

Getting started

ENGLISH

Information for Users on Disposal of Old Equipment and Batteries

[European Union only]

These symbols indicate that equipment with these symbols should not be disposed of as general household waste. If you want to dispose of the product or battery, please consider the collection systems or facilities for appropriate recycling.

Notice: The sign Pb below the symbol for batteries indicates that this battery

contains lead.

Battery

Products

DEUTSCH

Benutzerinformationen zur Entsorgung alter Geräte und Batterien

[Nur Europäische Union]

Diese Symbole zeigen an, dass derartig gekennzeichnete Geräte nicht als normaler Haushaltsabfall entsorgt werden dürfen. Wenden Sie sich zur Entsorgung des Produkts oder der Batterie an die hierfür vorgesehenen Sammelstellen oder Einrichtungen, damit eine fachgerechte Wiederverwertung möglich ist.

Batterie

Hinweis: Das Zeichen Pb unterhalb des Batteriesymbols gibt an, dass diese Batterie

Blei enthält.

Produkte

FRANÇAIS

Informations relatives à l’élimination des appareils et des piles usagés, à l’intention des utilisateurs

[Union européenne seulement]

Si ces symboles figurent sur les produits, cela signifie qu’ils ne doivent pas être jetés comme déchets ménagers. Si vous voulez jeter ce produit ou cette pile, veuillez considérer le système de collection de déchets ou les centres de recyclage appropriés.

Notification: La marque Pb en dessous du symbole des piles indique que cette pile

contient du plomb.

Pile

Produits

NEDERLANDS

Informatie voor gebruikers over het verwijderen van oude apparatuur en batterijen

[Alleen Europese Unie]

Deze symbolen g even aan dat apparatuu r met dit symbool niet mag worden weggegooid als algemeen huishoudelijk afval. Als u het product of de batterij wilt weggooien, kunt u inzamelsystemen of faciliteiten voor een geschikte recycling gebruiken.

Batterij

Opmerking: Het teken Pb onder het batterijsymbool geeft aan dat deze batterij lood

bevat.

Producten

6

Información para los usuarios sobre la eliminación de baterías/pilas usadas

[Sólo Unión Europea]

Estos símbolos indican que el equipo con estos símbolos no debe desecharse con la basura doméstica. Si desea desechar el producto o batería/pila, acuda a los sistemas o centros de recogida para que los reciclen debidamente.

ENGLISH

Getting Started

ESPAÑOL / CASTELLANO

Atención: La indicación Pb debajo del símbolo de batería/pila indica que ésta contiene

Baterías/pilas

Productos

plomo.

Informazioni per gli utenti sullo smaltimento delle apparecchiature e batterie obsolete

[Solo per l’Unione Europea]

Questi simboli indicano che le apparecchiature a cui sono relativi non devono essere smaltite tra i rifiuti domestici generici. Se si desidera smaltire questo prodotto o questa batteria, prendere in considerazione i sistemi o le strutture di raccolta appropriati per il riciclaggio corretto.

Batteria

Prodotti

Nota: Il simbolo Pb sotto il simbolo delle batterie indica che questa batteria contiene

piombo.

PORTUGUÊS

Informação para os utilizadores acerca da eliminação de equipamento usado e pilhas

[Apenas União Europeia]

Estes símbolos indicam que o equipamento com estes símbolos não deve ser eliminado juntamente com o restante lixo doméstico. Se pretende eliminar o produto ou a pilha, utilize os sistemas de recolha ou instalações para uma reciclagem apropriada.

ITALIANO

Preparation

Basic Operation

Settings

Aviso: O sinal Pb abaixo do símbolo para pilhas indica que esta pilha contém chumbo.

Pilha

Produtos

Πληροφορίες για την απόρριψη παλαιού εξοπλισμού και μπαταριών

[ Ευρωπαϊκή Ένωση μόνο ]

Αυτά τα σύμβολα υποδηλώνουν ότι ο εξοπλισμός που τα φέρει δεν θα πρέπει να απορριφθεί ως κοινό οικιακό απόρριμμα . Εάν επιθυμείτε την απόρριψη αυτού του προϊόντος ή αυτής της μπαταρίας , χρησιμοποιήστε το σύστημα περισυλλογής ή εγκαταστάσεις για ανάλογη ανακύκλωση .

Μπαταρία

Προϊόντα

Σημείωση : Το σύμβολο Pb κάτω από το σύμβολο μπαταρίας υποδηλώνει ότι η

μπαταρία περιέχει μόλυβδο .

ΕΛΛΗΝΙΚΑ

Troubleshooting

Others

7

1

Getting started

DANSK

Brugerinformation om bortskaffelse af gammelt udstyr og batterier

[Kun EU]

Disse symboler angiver, at udstyr med disse symboler ikke må bortskaffes som almindeligt husholdningsaffald. Hvis du ønsker at smide dette produkt eller batteri ud, bedes du overveje at bruge indsamlingssystemet eller steder, hvor der kan ske korrekt genbrug.

Batteri

Bemærk: Tegnet Pb under symbolet for batterierne angiver, at dette batteri indeholder

bly.

Produkter

Tietoja vanhojen laitteiden ja akkujen hävittämisestä

[Vain Euroopan unioni]

Nämä symbolit ilmaisevat, että symboleilla merkittyä laitetta ei tulisi hävittää tavallisen kotitalousjätteen mukana. Jos haluat hävittää tuotteen tai sen akun, tee se hyödyntämällä akkujen keräyspisteitä tai muita kierrätyspaikkoja.

Huomautus: Akkusymbolin alapuolella oleva Pb-merkintä tarkoittaa, että akku sisältää

lyijyä.

Akku

Tuotteet

Information för användare gällande bortskaffning av gammal utrustning och batterier

SUOMI

SVENSKA

[Endast den Europeiska unionen]

Dessa symboler indikerar att utrustning med dessa symboler inte ska hanteras som vanligt hushållsavfall. Om du vill bortskaffa produkten eller batteriet ska du använda uppsamlingssystem eller inrättningar för lämplig återvinning.

Observera! Märkningen Pb under symbolen för batterier indikerar att detta batteri

innehåller bly.

Batteri

Produkter

Opplysninger til brukere om kassering av gammelt utstyr og batterier

[Bare EU]

Disse symbolene viser at utstyr med dette symbolet, ikke skal kastes sammen med vanlig husholdningsavfall. Hvis du vil kassere dette produktet eller batteriet, skal du vurdere å bruke innsamlingssystemene eller andre muligheter for riktig gjenbruk.

Merk: Tegnet Pb under symbolet for batterier, viser at batteriet inneholder bly.

Batteri

Produkter

NORSK

8

ENGLISH

Сведения для пользователей по утилизации старого оборудования и батарей

[только для Европейского союза]

Данные символы указывают на то, что оборудование, на которое они нанесены, не должны утилизироваться, как обычные бытовые отходы. При необходимости утилизировать такое изделие или батарею обратитесь в специальный пункт сбора для их надлежащей переработки.

Батарея

Уведомление: Надпись Pb под символом батарей указывает на то, что данная

батарея содержит свинец.

Изделия

Informace pro uživatele k likvidaci starého zařízení a baterií

[Pouze Evropská unie]

Tyto symboly označují, že produkty s těmito symboly se nesmí likvidovat jako běžný odpad. Pokud chcete produkt nebo baterii zlikvidovat, využijte sběrný systém nebo jiné zařízení, které zajistí řádnou recyklaci.

РУССКИЙ

ČESKY

Getting Started

Preparation

Basic Operation

Upozornění: Značka Pb pod symbolem pro baterie znamená, že tato baterie

obsahuje olovo.

Baterie

Produkty

Informacje dla użytkowników dotyczące pozbywania się zużytego sprzętu i baterii

[Tylko kraje Unii Europejskiej]

Te symbole ozna czają, że sprzętu nie należy wyrzucać razem z odpadami gospodarczymi. Jeśli trzeba pozbyć się tego produktu lub ba terii, proszę skorzystać z systemu odbioru lub urządzeń do zbiórki odpadów elektronicznych, w celu odpowiedniego ponownego ich przetworzenia.

Bateria

Uwaga: Oznaczenie Pb, znajdujące się pod symbolem baterii wskazuje, że ta bateria

zawiera ołów.

Produkty

Felhasználói információ az elhasznált berendezések és akkumulátorok elhelyezéséről

POLSKI

MAGYAR

Settings

Troubleshooting

Termékek

Akkumulátor

[Csak az Európai Unióban]

Ez a szimbólum azt jelzi, hogy a berendezés nem helyezhető az általános háztartási hulladék közé. Ha meg szeretne szabadulni a terméktől vagy az akkumulátortól, akkor legyen tekintettel az gyűjtő rendszerre vagy intézményekre a megfelelő hasznosítás érdekében.

Others

Megjegyzés: Az alábbi Pb szimbólum - ha az akkumulátoron megtalálható - azt jelzi,

hogy az akkumulátor ólmot tartalmaz.

9

1

Getting started

How to Read this Manual/ Accessories/Optional Accessories

Getting Started

HDMI 1

VIDEO

INPUT

HDMI 2

S-VIDEO

This manual mainly describes the operating method using the remote control.

COMP.

INFO

● Buttons on the remote control are described as [Button Name].

● Items on the menu are described as “Selection Item”.

HIDE

ASPECT

LENS

TEST

LIGHT

MENU

PICTURE MODE

CINEMA 1

NATURAL

Buttons to be used are colored in a darker shade.

Remote Control ..................................... 1 piece

AAA size Batteries (for operation conrm) ............... 2 pieces

BACK

CINEMA

3

2

STAGE DYNAMIC

■

Conventions in this manual

Describes the limitations of the functions or usage.

Indicates good-to-know information.

Describes operational precautions.

P11 Indicates relevant pages for reference.

Preparation

Basic Operation

Settings

Power Cord For the US market (2 m) ................... 1 piece

Power Cord For the EU market (2 m) ................... 1 piece

Power Cord For the UK market (2 m) ................... 1 piece

● Instruction manual, warranty card and other printed material are also included.

Please check with your authorized dealer for details.

● Replacement Lamp: BHL5010-S (Lamp Unit)

● Replacement Filter (black in appearance): PB006560999 (Inner Filter)

Replacement Filter (white in appearance): PB006575099 (Inner Filter)

Troubleshooting

Others

11

1

Getting started

Controls and features

■

Front Side/Left Side

Do not place your fingers in the gap at the lens

●

during lens shift adjustment. This may cause injuries

if your ngers are caught in between the gap.

(

Do not let your ngers or other objects get caught in

●

between the lens cover while closing the cover. This can cause injuries or malfunction.

■

Rear Side/Top Side/Right Side

P23

)

CAUTION

Exhaust Vent

Remote Sensor

P15

)

(

Lens Cover

Air Inlet

Lens Cover (opened) (

P22

)

(closed)

12

To connect the power cord (

Lamp Cover (

)

P22

Remote Sensor (

)

P46

P15

)

WARNING

ENGLISH

Light on (Red): Warning mode

P45

)

(

Getting Started

Light on (Red): Standby mode Light on (Green): During projection Blinking (Green):

Image is temporarily hidden ( Blinking (Red): Cool Down mode (

P23

)

Left button

Down button

To display the menu

(

P28

LAMP

STANDBY/ON

INPUT

HIDE

OK

MENU

)

BACK

Light on/Blinking (Orange):

Lamp warning

)

(

P45

To turn on/off the power

To switch input (

To hide the image temporarily (

Up button

Right button

To return to the previous menu

P22

P23

)

Preparation

Basic Operation

■

Bottom Surface

Air inlets/Filter (

Feet: The height (0 to 5 mm) can be adjusted by turning the foot.

Air inlets

)

P49

Manual button for lens cover: Press and hold the button to open the lens cover. As this is used for maintenance, it is not necessary to use it at normal times. (

CAUTION

P54

Settings

Troubleshooting

)

Others

Do not close lens cover when projecting. Otherwise

●

it will cause malfunction, heat and re.

13

1

Getting started

Controls and features (continued)

■

Remote Control

To turn off the power

To select input mode (

To control lens (

To set the screen size (

To display test pattern

To display/close the menu

STAND BY

ON

To turn on the power

INPUT

P22

P24

)

HDMI 1

VIDEO

LENS

HDMI 2

S-VIDEO

ASPECT

)

TEST

COMP.

INFO

HIDE

LIGHT

To display information (

To hide the image temporarily (

P39

)

P23

To illuminate buttons on the remote control for 7 seconds

To select or conrm

P28

)

(

MENU

PICTURE MODE

CINEMA 1

NATURAL

CINEMA 2

STAGE

BACK

CINEMA 3

DYNAMIC

To return to the previous menu

To switch picture mode (

P40

)

To set gamma (

To adjust color temperature (

14

P40

LENS. AP.

MENU POSITION

PIC. ADJ.

To change the menu position sequentially.

To switch sequentially between Contrast,

USER1

)

GAMMA

USER2

C.TEMP

Brightness, Color, Tint, Sharpness and Detail enhance.

)

Lens Aperture (

P40

)

ENGLISH

Effective Range of Remote Control Unit

Loading Batteries

How to Use the Remote control

Getting Started

1

2 3

● If the remote control has to be brought closer to the projector to operate, it means that the batteries are wearing out.

When this happens, replace the batteries. Insert the batteries according to the

marks.

● Be sure to insert the end rst.

● If an error occurs when using the remote control, remove the batteries and wait for 5 minutes. Load the batteries again

and operate the remote control.

■ When directing the remote control

toward this unit

● When aiming the remote control towards the

remote sensor on this unit, ensure that the distance to the sensor in front or at the rear of this unit is within 7 m.

● If the remote control fails to work properly,

move closer to this unit.

This unit

30°

20° 20°

Preparation

Basic Operation

Settings

■

When reecting off a screen

● Ensure that the total of distance A between

this unit and screen and distance B between remote control and screen is within 7 m.

● As the efciency of signals reected from the

remote control unit differ with the type of screen used, operable distance may decrease.

Screen

20°

A

20°

B

Remote control

30°

Remote control

This unit

Troubleshooting

Others

15

2

Preparation

Selecting Connecting Devices

● Do not turn on the power until connection is complete.

● The connection procedures differ according to the device used. For details, refer to the instruction manual of the device to be

connected.

● This device is used for image projection. Connect to an audio output device such as amplier and speaker for audio output

from the connected device.

● The images may not be displayed depending on the devices and cables to be connected.

For HDMI cable (sold separately), only use one that is HDMI-approved.

● It may not be possible to connect to this unit depending on the dimension of the connector cover of the cables to be

connected.

BD/DVD Recorder

To connect via HDMI terminal (

HDMI 1

HDMI 2

BD/DVD Player

)

P18

To connect via component video terminals (

P17

)

To connect RS-232C terminal (external control) (

VIDEO

Y

CB/PB

CR/PR

S-VIDEO

SYNC

R B G

RS-232C

P50

)

16

To connect via video terminal (

PC

P17

)

To connect via S-video terminal (

P17

)

VCR and camcorder

Connecting

Connecting via Component Video Cable

Connecting via Video Cable and S-Video Cable

ENGLISH

Getting Started

This unit

To video input termina

HDMI 2

HDMI 1

This unit

video cable

Video output

Preparation

(sold separately)

l

CB/PB

VIDEO

CR/P

R

S-VIDEO

R B G

SYNC

To S-video input terminal

S-video cable (sold separately)

Y

VCR and camcorder

Basic Operation

S-video output

Settings

VIDEO

CB/PB

Y

HDMI 1

HDMI 2

CR/PR

BG

SYNC

R

To component video input terminals

S-VIDEO

RS-232C

Component video cable (sold separately)

●

Set “COMP.” in the setting menu to “Y Pb/Cb Pr/Cr”. ( P33 - 12 )

BD/DVD player

Component video output terminals

(red)

C

R/PR

C

(blue)

B/PB

Y (green)

Troubleshooting

Others

17

2

Connecting via HDMI Cable

Connecting via HDMI-DVI Conversion Cable

Connecting(Continued)

Preparation

This unit

HDMI 1

HDMI 2

Y

To HDMI 1 or HDMI 2 input terminal

HDMI cable (sold separately)

VIDEO

B

CB/P

CR/PR

B G

S-VIDEO

R

SYNC

● If noise is produced, take PCs (Notebook PC) away from this unit.

● Use only HDMI-approved equipment.

● Reducing the length of the cable is recommended if there is no picture.

Notebook PC

BD/DVD recorder

HDMI output terminal

This unit

HDMI 1

HDMI 2

Y

CB/PB

VIDEO

CR/PR

S-VIDEO RS-232C

R

SYNC

B G

To HDMI 1 or HDMI 2 input terminal

HDMI-DVI conversion cable

(sold separately)

● If noise is produced, take PCs (Desktop computer) away from this unit.

● Reducing the length of the cable is recommended if there is no picture.

Desktop computer

DVI output terminal

18

Connecting via SCART-RCA Cable

Connecting via RGB Video Cable

This unit

ENGLISH

Getting Started

Preparation

HDMI 1 HDMI 2

Y

G

VIDEO

CR/PR

CB/PB

B

S-VIDEO

SYNC

R

RS-232C

To RGB video and sync signal input terminals

SCART-RCA cable

(sold separately)

● Set “COMP.” in the setting menu to “SCART”.( P33 -

This unit

12

BD/DVD player for European market

Basic Operation

SCART terminal

)

Settings

HDMI 1 HDMI 2

Y

VIDEO

CR/PR

CB/PB

BG

S-VIDEO

SYNC

R

To RGB video input terminals

RGB video cable (sold separately)

● Set “COMP.” in the setting menu to “RGB”.( P33 -

● For information on compatible input signals, see “Specications”. ( P56)

RS-232C

12

Troubleshooting

Device equipped with RGB output

RGB video output terminals

R(Red)

B(Blue)

G(Green) (Includes sync signals)

)

Others

19

2

Set Angle

Shift

Preparation

Installing the Projector and Screen

While installing, please place this unit and the screen perpendicular to each other. Failing to do so may

increase trapezoidal distortion. Please refer to “Keystone”. ( P36 -

● The angle range which can be set for this unit is ±10°.

24

)

10°

● Malfunctions may occur if the angle is not set within the above-mentioned range.

■

Left/Right position

* 0% up/down position (center)

Approximately 34% (maximum) of the projected image

■

Up/Down position

* 0% left/right position (center)

10°

Approximately 34% (maximum) of the projected image

■

Shifting range of projected image

Approximately 80% (maximum) of the projected image

Approximately 80% (maximum) of

Lens shift correlation chart:

Left-Right Shift(%) 0% 5% 10% 15% 20% 25% 30% 34%

Up-Down Shift(%) 80% 74% 66% 57% 47% 34% 18% 0%

the projected image

● Maximum Up-Down shift varies with the amount of Left-Right shift. Likewise,

maximum Left-Right shift varies with the amount of Up-Down shift.

● The values on the chart are intended to act as a guide. Use them for reference

during installation.

80%

34%34%

Lens center

80%

20

Screen Size and Projection Distance

Determine the distance from the lens to the screen to achieve your desired screen size. This unit uses a 2.0x power zoom lens for projection.

■

Relationship Between Projection Screen Size and Projection Distance

ENGLISH

Getting Started

Preparation

Projection Screen Size

(Diagonal Length) Aspect Ratio 16:9

60"

(Approx. 1.52m)

70"

(Approx. 1.78m)

80"

(Approx. 2.03m)

90"

(Approx. 2.29m)

100"

(Approx. 2.54m)

110"

(Approx. 2.79m)

120"

(Approx. 3.05m)

130"

(Approx. 3.30m)

Approximate Projection Distance

W(Wide) to T(Tele)

Approx. 1.78m to

Approx. 2.09m to Approx. 4.28m

Approx. 2.40m to

Approx. 2.70m to

Approx. 3.01m to

Approx. 3.31m to

Approx. 3.62m to Approx. 7.36m

Approx. 3.92m to

Approx. 3.66m

Approx. 4.89m

Approx. 5.51m

Approx. 6.13m

Approx. 6.75m

Approx. 7.98m

Projection Screen Size

(Diagonal Length) Aspect Ratio 16:9

140"

(Approx. 3.56m)

150"

(Approx. 3.81m)

160"

(Approx. 4.06m)

170"

(Approx. 4.32m)

180"

(Approx. 4.57m)

190"

(Approx. 4.83m)

200"

(Approx. 5.08m)

Approximate Projection Distance

W(Wide) to T(Tele)

Approx. 4.23m to

Approx. 4.53m to

Approx. 4.84m to Approx. 9.84m

Approx. 5.14m to Approx. 10.45m

Approx. 5.45m to Approx. 11.07m

Approx. 5.75m to Approx. 11.68m

Approx. 6.06m to

Approx. 8.60m

Approx. 9.22m

Approx. 12.30m

● The projection distances in the table are provided only as a guide. Use them as a reference during installation.

● To adjust the installation, use a projected image of aspect ratio 16:9.

Basic Operation

Settings

Troubleshooting

Others

21

3

BACK

Back

Operate

Select

Exit

MENU

Zoom

Lens Control

Basic Operation

Projecting Image

This section describes the basic operations to project input images on the screen.

Preparation

1

Insert the power plug to the power

STAND BY

INPUT

HDMI 1

VIDEO

LENS

HDMI 2

S-VIDEO

ASPECT

ON

COMP.

INFO

HIDE

outlet

1

Connect to this unit Connect to the power outlet

2

STANDBY/ON

Light on (Red)

TEST

MENU

PICTURE MODE

CINEMA 1

NATURAL

USER1

C.TEMP

GAMMA

LIGHT

BACK

CINEMA

3

2

STAGE DYNAMIC

MENU

USER2

POSITION

PIC.

LENS.

ADJ.

AP.

1

2

Turn on the power

ON

Power Cord (Supplied)

2

STANDBY/ON

Light on (Green)

● You can also press the button on the unit to turn on the power.

(

3

Project the image

1

Select input mode

● You can also select the input mode by pressing the unit. (

2

Play back the selected device

4

Adjusts image focus, size (zoom), and

P13)

● The lens cover will be opened.

P13)

HDMI 1 HDMI 2 　 COMP． Video S-Video

INPUT

button on the

position (shift).

22

1

Adjust the focus

Lens Control

WARNING

LAMP

ST ANDBY/ON

LENS

Focus

Select

Back

Exit

MENU

BACK

Operate

Adjust accordingly by pressing

the up/down buttons

2

Adjust the image size (zoom)

LENS

Adjust accordingly by

pressing the up/down

buttons

Adjusts image position (shift).

3

Lens control

ENGLISH

Getting Started

TIPS

LENS

● After adjusting the image position, it may be necessary to select “Pixel Adjust” from the Settings menu “Installation”. (

● Every time the

be switched among “Focus”, “Zoom” and “Shift”.

LENS

4

To end

BACK

Turn off the power

5

STAND BY

While a confirmation screen is displayed

STAND BY

STAND BY/ON

Cool Down mode

STAND BY/ON

Focus Zoom

Shift

Select

Back

BACK

Operate

button is pressed, the adjustment item will

Adjust accordingly by

pressing the up/down

buttons

P36 -

22

Shift

Blinking (Red Lamp)

Light on (Red Lamp)

● When power off, the lens cover will be closed.

● The power cannot be turned off within approximately 90 seconds

after it has been turned on. Start operation only after 90 seconds time.

● You can also press the button on the unit to turn off the

power. (

P13)

● Pull out the power plug when the unit will not be used for a

prolonged time.

You can hide the image temporarily

You can hide the image temporarily.

HIDE

)

Green light blinks when the image is hidden.

● Press the button again to display

image.

● The power cannot be turned off when the

image is temporarily hidden.

MEMO

About Cool Down mode

● The Cool Down mode is a function to

cool down the lamp for approximately 60 seconds after projection is complete. This function prevents the internal parts of the unit from deformation or damage due to overheating of the lamp. It also prevents lamp blowout and premature shortening of lamp life.

During Cool Down mode, the [STANDBY/

●

ON] indicator blinks in red.

● After the Cool Down mode is complete,

the unit automatically returns to standby mode.

● Do not pull out the power plug during

Cool Down mode. This may shorten the lamp life and cause a malfunction.

Preparation

Basic Operation

Settings

Troubleshooting

Others

23

3

Setting the Screen Size

Masking the Surrounding Area of an Image

Basic Operation

Convenient Features during Projection

You can change the screen size of the projected image or hide the surrounding area of an image for which quality at the outer area has deteriorated.

The projected image can be set to a most appropriate screen size (aspect ratio).

STAND BY

ON

ASPECT

4:3 16:9 zoom

HDMI 1

VIDEO

LENS

TEST

MENU

PICTURE MODE

CINEMA 1

NATURAL

USER1

GAMMA

C.TEMP

INPUT

HDMI 2

S-VIDEO

ASPECT

CINEMA 2

STAGE

USER2

LENS. AP.

COMP.

INFO

HIDE

LIGHT

BACK

CINEMA 3

DYNAMIC

MENU POSITION

PIC. ADJ.

● The screen size can also be set from “Aspect(Video)” of the setting menu.

(

P34 -

14

)

● When PC signals are input, the “Aspect(Computer)” setting will be available

instead. (

■

Input Image and Projected Image by Different Screen Size

P34 -

Settings

Input Image

SDTV (4:3)

SDTV(4:3) Image recorded in landscape (black bands on top and bottom) of DVD software

)

15

4：3

Aspect Ratio: Same Most appropriate screen size

Aspect Ratio: Same Small image is projected

Screen Size

16：9

Aspect Ratio: Landscape Image is stretched horizontally

Zoom

Aspect Ratio: Same Top and bottom of the image are missing

Aspect Ratio: Same Most appropriate screen size

● Depending on the input image, selecting “4:3” may result in a vertically

stretched image, while selecting “16:9” provides you with the most appropriate screen size.

Images for which quality at the outer area has deteriorated can be projected by masking (hiding) the surrounding area of the projected image.

1

Project the image

24

Image for which quality at the outer area has deteriorated.

Mask the image

Video/S-Video

COMP.

Aspect（Video） Aspect（Computer) V-stretch Picture Position Over scan

Film Mode

Exit

MENU

BACK

Back

Select

Operate

HDMI

16:9 Auto

Auto

Off

Mask

Off

5% Off

2.5%

Input Signal

2

1

Display the setting menu

MENU

Picture Adjust

Picture Mode

Contrast Brightness Color Tint Color Temp. Gamma Advanced Lens Aperture

Exit

MENU

Select

ENGLISH

Getting Started

MEMO

● Masking is available only when high

Natural

0

0 0

0

6500K

Normal

2

Reset

Operate

Back

BACK

denition images are input.

Preparation

2

Select “Input Signal”

1

Select

3

Set a mask value

Select

1

“Mask”

Confirm

2

Confirm

2

Input Signal

HDMI COMP. Video/S-Video Aspect（Video）

Aspect（Computer)

V-stretch Picture Position Over scan Mask Film Mode

Exit

MENU

Select

自动

Operate

Basic Operation

Settings

16:9 Auto

Off

2.5% 5%

5%

Off

Auto

Back

BACK

3

Example: When the “Mask” value is changed from “Off”

To end

MENU

Troubleshooting

“5%”

Others

25

4

Settings

The structure of the Settings menu

The menu for this device is structured as follows:

There are items that cannot be modied

●

without entry.

CAUTION

Picture Adjust

01

Picture Mode

02

Contrast

03

Brightness

04

Color

05

Tint

06

Color Temp.

07

Gamma

08

Advanced

09

Lens Aperture

10

Reset

Adjusts the pattern of the projected image.

Setting: Cinema 1, Cinema 2, Cinema 3, Natural, Stage, Dynamic, User 1, User 2

Adjusts the contrast of the projected image.

Setting: –50 to 50

Adjusts the brightness of the projected image.

Setting: –50 to 50

Adjusts the color density of the projected image.

Setting: –50 to 50

Adjusts the hue of the projected image.

Setting: –50 to 50 Sets the color temperature of the projected image. Setting: 5800K, 6500K, 7500K, 9300K, High Bright, Custom 1, Custom 2, Custom 3 Sets the gradation characteristics of the projected image. Setting: Normal, A, B, C, D, Custom 1, Custom 2, Custom 3 Adjusts the contours of the image and detailed composition of the image. Setting: Sharpness, NR, CTI, Clear Motion Drive Sets the lens aperture. Setting: 1, 2, 3 Reset the setting.

Input Signal

11

HDMI

12

COMP.

13

Video/S-Video

14

Aspect (Video)

15

Aspect (Computer)

16

V-Stretch

17

Picture Position

18

Over Scan

19

Mask

20

Film Mode

Congures HDMI input signal.

Setting: Input, Color Space, Control with HDMI

Congures the input signal for the component video input terminals.

Setting: Y Pb/Cb Pr/Cr, RGB, SCART

Congures the Video/S-Video input signals.

Setting: NTSC, Setup Level, Color System

Congures the screen size of the projected image.

Setting: 4:3, 16:9, Zoom

Congures the screen size of the projected image.

Setting: Auto, 1:1, Full When set to “On”, the projected 2.35:1 image will be stretched vertically to the panel resolution. Setting: On, Off Adjusts the horizontal/vertical position of the projected image. Selects whether or not to set over scan for the SD video signal. Setting: On, Off Masks (Hides) the outer area of the projected image. Setting: 2.5, 5, Off

Selects this to view movies shot on lm.

Setting: Auto, lm, Off

26

Installation

21

Lens Control

22

Pixel Adjust

23

Installation Style

24

Keystone

25

Screen Adjust

ENGLISH

Controls the individual motorized function of the lens when setting up the projector.

Setting: Focus, Zoom, shift, Image pattern, Lock

Makes ne adjustments of 1 pixel unit for each minor color shift in the horizontal/vertical direction

of the image. Setting: horizontal and vertical

Flips the image to the left or right, up or down according to the projection state of the projector. Setting: Front, Ceiling Mount (F), Rear Ceiling Mount (R) Compensates for trapezoidal distortion caused by installation.

Corrects skewed white balance derived from the reective characteristics of the screen.

Setting: Off, A, B, C

Getting Started

Preparation

Display Setup

26

Back Color

27

Menu Position

28

Menu Display

29

Line Display

30

Source Display

31

Logo

32

Language

Function

33

Lamp Power

34

Test Pattern

35

Off Timer

36

High Altitude

Mode

Congures the screen color displayed when there is no input signal.

Setting: Blue, Black Sets the display position of the menu. The possible positions for displaying the menu are at the

four corners or at center of the screen. Sets the duration for displaying the menu.

Setting: 15sec, On Sets whether to display the input setting when switching the input.

Setting: 5 sec, Off Sets whether to display the source of input signals when changing the input.

Setting: On, Off Sets whether to display “Logo” during startup.

Setting: On, Off Sets the language of the menu display (12 languages).

Congures the output of the light-source lamp.

Setting: Normal, High Display 6 types of test patterns. Automatically powers off when there is no operation for a certain duration. Setting: 1 hour, 2 hours, 3 hours, 4 hours

Selects this when using the projector in a location of low atmospheric pressure (higher than 900 meters above sea level).

Setting: On, Off

Basic Operation

Settings

Troubleshooting

Information

Input Image Connector, Input Source Name, PC resolution, PC H Frequency, PC V Frequency, Deep Color Depth, and Lamp Use are displayed.

Others

27

4

Procedures for Menu Operation

Settings

Setting Menu

Projected images can be adjusted to a desired view by changing the initial settings.

Example:

When changing “Aspect(Video)” from “4:3” to “16:9”

STAND BY

HDMI 1

VIDEO

LENS

TEST

MENU

PICTURE MODE

CINEMA 1

NATURAL

USER1

INPUT

HDMI 2

S-VIDEO

ASPECT

CINEMA 2

STAGE

USER2

ON

COMP.

INFO

HIDE

LIGHT

BACK

CINEMA 3

DYNAMIC

MENU POSITION

1

Display the setting menu

Picture Adjust

Picture Mode

Contrast Brightness

MENU

2

Select “Input Signal” “Aspect(Video)”

Select

1

Confirm

2

Color Tint Color Temp. Gamma Advanced Lens Aperture

Exit

MENU

Input Signal

HDMI COMP. Video/S-Video

Video

Aspect（ Aspect（Computer) V-stretch Picture Position Over scan Mask Film Mode

Exit

MENU

Select

Natural

0

0 0

0

6500K

Normal

2

Reset

Operate

Back

BACK

Auto

Operate

4:3

16:9

Zoom

Off

Off 5%

Back

BACK

)

LENS.

GAMMA

C.TEMP

AP.

PIC. ADJ.

28

3

Set to “16:9”

Select

1

4

To end

MENU

Confirm

2

Input Signal

HDMI COMP. Video/S-Video

Video

)

Aspect（ Aspect（Computer) V-stretch Picture Position Over scan Mask Film Mode

Exit

MENU

Select

16:9

Auto

Off

Off 5%

Auto

Operate

Back

4:3

16:9

Zoom

BACK

Setting Menu

Item values shown in are factory settings.

● Items that can be congured differ according to the input signals.

ENGLISH

Getting Started

There are items that cannot be modied

●

without entry.

CAUTION

Picture Adjust

01

Picture Mode

Selects Picture Mode(Cinema 1, Cinema 2, Cinema 3, Natural, Stage, Dynamic, User 1 and User 2).

Cinema 1 This is the picture setting closest to lm. It is best suited for general movie viewing.

Cinema 2

Cinema 3 This is the picture setting best suited for viewing animated movies. Natural This is the picture setting for natural hues and tones. It is best suited for viewing dramas and video. Stage This is the picture setting best suited for watching live concerts and stage performances.

Dynamic

02

Contrast

Adjusts the contrast of the projected image.

(Black) –50 to 50 (White)

03

Brightness

Adjusts the brightness of the projected image.

(Darken) –50 to 50 (Brighten)

04

Color

Adjusts the color density of the projected image.

(Lighten) –50 to 50 (Darken)

05

Tint

Adjusts the hue of the projected image.

(Red) –50 to 50 (Green)

This is the picture setting for vivid hues based on HDTV standards. It is best suited for viewing action movies and movies with vivid colors.

This is the picture setting best suited for viewing the picture in a room that cannot be made completely dark.

Preparation

Basic Operation

Settings

Troubleshooting

Others

29

4

Settings

Setting Menu (Continued)

Picture Adjust > Color Temp.

06

Color Temp.

Sets the color temperature of the projected image.

5800K

6500K Select this to have a balanced image.

7500K

9300K

High Bright Select this to get the brightest image.

Custom 1

Custom 2

Custom 3

Select this to give a reddish tinge to the image.

Select this to give a bluish tinge to the image.

Select this to give a greater bluish tinge than 7500K.

Correction

Value

Gain

(Bright part)

Offset

(Dark part)

Correction

Value

Gain

(Bright part)

Offset

(Dark part)

Correction

Value

Gain

(Bright part)

Offset

(Dark part)

Based on this selection of Correction Value (5800K, 6500K, 7500K, 9300K, H.B.), adjusts the following Gains and Offsets.