JVC AV-P950U User Manual
R
ENGLISH
DIGITAL PRESENTER
MANUEL D’INSTRUCTIONS : PRESENTOIR NUMÉRIQUE
AV-P950U
FRANCAIS
INSTRUCTIONS
For Customer Use:
Enter below the Serial No. which
are located on the fram.
Retain this information for future
reference.
Model No. AV-P950U
Serial No.
This instruction book is made from 100% recycled paper.
SS961588-001
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK.
DO NOT REMOVE COVER (OR BACK).
NO USER SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
The lightning flash with arrowhead symbol,
within an equilateral triangle is intended to alert
the user to the presence of uninsulated “dangerous voltage” within the product’ s enclosure
that maybe of sufficient magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral
triangle is intended to alert the user to the
presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.
The instructions are given in two languages :
English from page 3 to 18 and French from page 19 to 34
Les instructions sont donnés en deux langues :
En anglais de la page 3 à 18 et en français de la page 19 à 34.
NOTE:
The rating plate (serial number plate) and safety caution
are on the bottom and/or the back of the main unit.
WARNING:
TO PREVENT FIRE OR SHOCK HAZARD, DO NOT
EXPOSE THIS UNIT TO RAIN OR MOISTURE.
AVERTISSEMENT:
DE PREVENTION D'INCENDIE OU D'ELECTROCUTION,
NE PAS EXPOSER CET APPAREIL A LA PLUIE OU
L'HUMIDITE.
WARNING:
THIS IS A CLASS A PRODUCT. IN A DOMESTIC ENVIRONMENT THIS PRODUCT MAY CAUSE RADIO
INTERFERENCE IN WHICH CASE THE USER MAY
BE REQUIRED TO TAKE ADEQUATE MEASURES AT
HIS OWN EXPENSE.
AVERTISSEMENT:
CECI EST UN APPAREIL DE CLASSE A. DANS UN
ENVIRONNEMENT DOMESTIQUE CET APP AREIL PEUT
CAUSER UNE INTERFÉRENCE RADIO D ANS QUEL CAS
L'UTILISATEUR PEUT AVOIR À PRENDRE DES
MESURES ADÉQUATES À SES PROPRES FRAIS.
WARNING: This equipment generates, uses, and can radiate
radio frequency energy. If not installed and used in accordance
with the instruction manual, it may cause interference to radio
communications. The rules with which it must comply aff ord reasonable protection against such interference when it is used in
a commercial environment. Operation of this equipment in a residential area is likely to cause interference, in which case the
user will be required to correct the interference at his own expense.
2
Information for Canada
This Class A digital apparatus complies with Canadian ICES-
003.
Informations pour le Canada
Cet appareil numérique de la classe A est conforme à la
norme NMB-003 du Canada.
Thank you for purchasing the JVC AV-P950 Digital Presenter . To make the most of this unit’s many features, please read this booklet
carefully. After reading, keep it handy for future reference.
CONTENTS
Safety precautions ..............................................................................................................................................................................2
Contents...............................................................................................................................................................................................3
Features ............................................................................................................................................................................................... 3
Handling precautions .........................................................................................................................................................................3
Before use............................................................................................................................................................................................4
Part names ........................................................................................................................................................................................4
Setup .................................................................................................................................................................................................4
Operation ............................................................................................................................................................................................. 6
Control panel .....................................................................................................................................................................................6
Rear panel ......................................................................................................................................................................................... 8
Menu adjustment ............................................................................................................................................................................. 10
Remote control unit..........................................................................................................................................................................11
Presentation (basic).......................................................................................................................................................................... 12
Printed material and 3-dimensional objects..................................................................................................................................... 12
Slide presentation ............................................................................................................................................................................12
Transparent material such as OHP sheets ......................................................................................................................................13
Capturing images of surrounding objects ........................................................................................................................................ 13
Presentation (application) ................................................................................................................................................................14
Preview mode ..................................................................................................................................................................................14
Picture memory ............................................................................................................................................................................... 15
5-position camera angle function..................................................................................................................................................... 15
External control................................................................................................................................................................................. 16
Optional book holder ........................................................................................................................................................................16
Troubleshooting ................................................................................................................................................................................17
Specifications.................................................................................................................................................................................... 18
ENGLISH
FEATURES
● High-precision presentation system capable of projecting images of a wide range of physical objects including 3-dimensional objects,
OHP sheets, slides, and printed matter.
● XGA-equivalent high-resolution images ideal for input to a high-resolution projector. This unit can be connected to a projector or a
monitor with XGA, SVGA or VGA resolution.
● Pictures can be captured by a personal computer via the USB connector.
● x20 zoom (x5 optical zoom x x4 digital zoom) capability for presentation of a wide range of material, ranging from B4-size documents
to 35-mm slide film.
● Wireless remote control unit for trouble-free operation from a distance.
● Useful presentation functions including preview mode, picture memory , 5-position camer a angle , z oom preset and text mode, allow-
ing eye-catching presentations.
● Flat stage allows magnification of the four corners of an A4 portrait so that image-capturing capability can be optimised.
● This unit can be controlled via a personal computer.
HANDLING PRECAUTIONS
● Do not expose this unit to direct sunlight or leave it near a heater .
● Clean the unit by wiping off dirt with a cloth that has been moistened with detergent solution. Make sure the cloth is well wrung out.
Afterwards wipe dry with a dry cloth. Do not allow the unit to come into contact with volatile liquids such as thinner, benzene or
insecticide. Deformation, discoloration or malfunction may result. Also do not immerse the unit in water as it may be damaged.
3
BEFORE USE
Part names
Side illumination
Remote control light reception section
Camera head
Slide film holder
Camera arm
Close-up lens
Side illumination
Lock release button
(UNLOCK)
POWER switch
Back illumination
Setup
1.
While pressing the UNLOCK button 1, raise the camera
arm so that it stands in the direction shown
2.
When the camera arm is raised all the way, release the
UNLOCK button.
3.
When the UNLOCK button returns to its original position
and the camera arm is locked, release the camera arm.
4.
T urn the camera head in the direction shown 3 until a click
is heard. The camera head should no w be facing the stage.
2
Rear panel
Stage
Control panel
2
.
1
5.
Move the side illumination arms in the directions shown,
and then 5.
first
4
CAUTION
• When using the UNLOCK button, do not release the
camera arm until it is locked. Do not apply excessive force on the side illuminations (arms and lights),
otherwise, a malfunction or injury may result.
4
4
3
5
6.
Perform the following connections to the input connector of a projector or display.
• To protect this unit and the connected equipment, be sure to turn the POWER switch to OFF before connecting cables.
● Connection with the equipment with the D-sub 15-pin input connector (for main picture presented using a projector, etc.
Projector
Rear panel
REMOTE INPUT (RS-232C)
EXT INPUT
1
0
ABCDEF
MODE
RGB OUTPUT 1
DC OUTPUT
DC12V 400mA
RGB OUTPUT 2
S-VIDEO
OUTPUT
USB
VIDEO
OUTPUT
Display
Commercially-available D-sub 15-pin cable
• It is recommended that you use the shortest possible cable (less than 3 m) when connecting equipment to the RGB output
terminal.
• Set the RGB output according to the specifications of the projector or display to be connected.
(For setting, refer to the rear panel "MODE" on page 8.)
● Connection with the equipment with the Video or S-Video/ input connector for monitor and preview piduters. D-sub 15-pin input
connector (for main screen)
Rear panel
REMOTE INPUT (RS-232C)
EXT INPUT
ABCDEF
1
0
RGB OUTPUT 1
DC OUTPUT
DC12V 400mA
RGB OUTPUT 2
S-VIDEO
OUTPUT
USB
VIDEO
OUTPUT
LCD monitor
TV monitor
ENGLISH
Provided video cable
Commercially-available S-video cab le
• For The USB cable connection, refer to the separate "Application software instructions".
7.
Connect the connector of the provided power cord into AC IN (refer to page 9) and the connect plug to an AC outlet, then turn the
POWER switch ON.
● To store this unit, perform the set-up procedure (see page 4) in reverse order:
Fold the side illumination arms first. Then press the UNLOCK button to fold the camera arm.
• Facing the unit, start with the right side illumination arm (the
side in the illustration at the bottom of page 4)
5
Keep the camera head parallel to the camera arm.
• Hold the plug when unplugging the power cord or video cables.
CAUTION
• When storing this unit, do not lean it against a wall, etc. If it falls over, a malfunction or injury may result.
• During transportation, do not hold the camera arm, side illumination (lamp or ar m), etc. Doing so could place
excessive force on the unit, resulting in a malfunction or injury.
5
OPERATION
Control panel
LIGHTS
Use to turn on either the side illuminations or the back illumination.
With factory setting, when the
power is switched on, the side illuminations will come on.
Every time the button is pressed,
the lighting of the unit changes as
follows:
Side illuminations
ON
all lighting
OFF
side illuminations ON again, and
so on.
back illumination
ON
LIGHTS
NEGA/POSI BW/COLOR TEXT MODE
NEGA/POSI: Reverse the colors and bright-
ness of a picture.
Reverses negative film images
to enable normal color picture
output.
(In the NEGATIVE mode, settings are for the negative film.)
BW/COLOR: Changes a color picture into
B/W. If used when showing
B/W material, definition of the
picture will improve.
TEXT MODE: Makes characters clearer and
sharper. Use to show text material for effective presentation.
ONBWNEGA
NEGA/
POSI
BW/
COLOR
TEXT
MODE
MENU/
ENTER
DIGIT AL PRESENTER AV-P950
MENU/ENTER
Use to perform camera
adjustments and setting
on the on-screen display.
(Refer to "Menu adjustment" on page 10.)
PICTURE MEMORYEXT INCAMERA
SOURCE SELECT
SOURCE SELECT
Use to select the output picture. Choose from camera, EXT INPUT
connector, or picture memory.
CAMERA: Picture from the camera is selected.
EXT IN: The picture input to the EXT INPUT connector
(from a personal computer, for example) is
selected.
PICTURE MEMORY: When a picture is stored in memory, it can be
(1, 2, 3)
• The picture input from the EXT INPUT connector cannot be used for
the output to the VIDEO OUTPUT and S-VIDEO OUTPUT
connectors. (See the rear panel on pages 8 and 9)
selected as the output picture (refer to "Picture
memory" on page 15).
FOCUS
Use to adjust the focus of the camera picture.
AUTO: When this button is pressed for
automatic focusing of an image, the
indicator starts blinking. As soon as
focusing is achieved the indicator will
go out.
NEAR: Press this button to reduce the focal
length (to focus on a point closer to the
camera).
FAR: Press this button to increase the focal
length (to focus on a point further from
the camera).
• Press the AUTO button to exit the menu
display.
6
Loading...