JVC AV-H437115A User Manual for AV-H437115A

AV-H437115A 43" Class

RM-C3416

Table of Contents

Warning and precautions…………….…………….....…………………...………..……2

Important safety instructions ……………………………….....…….........………..……3

Warnings and cautions…………………………………………………………….…..….5

Technical specifcations…………………………………………………….……...……....6

Installation………………………………………………………………………....….…….7

Remote control………………………………………………………………….…...……12
Operation………………………………………………………………………...……..…13
Troubleshooting ………………………………………………………………..……...…25

The terms HDMI, HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or
registered trademarks of HDMI Licensing Administrator, Inc.

WARNING AND PRECAUTIONS

-2-

IMPORTANT SAFETY INSTRUCTIONS

-3-

IMPORTANT SAFETY INSTRUCTIONS

-4-

WARNINGS AND CAUTIONS

High voltages are used in the operation

Warning

of this television receiver. Do not remove
the cabinet back from your set. Refer
servicing to qualified service personnel.

Warning

To prevent fire or electrical shock
hazard, do not expose the television
receiver to rain or moisture.

Warning

Do not drop or push objects into the
television cabinet slots or openings.
Never spill any kind of liquid on the
television receiver.

Do not trap the power supply cord under

Caution

the television receiver.

Caution

Never stand on, lean on, or suddenly push
the television or its stand. You should pay
special attention to children. Serious injury
may result if it should fall.

Caution

Do not place your television on an unstable
cart, stand, shelf or table. Serious injury to
an individual , and damage to the
television, may result if it should fall.

Caution

Do not block the ventilation holes in the
back cover. Adequate ventilation is
essential to prevent failure of electrical
components.

When the television receiver is not

Caution

used for an extended period of time, it
is advisable to disconnect the AC power
cord from the AC outlet.

Caution

If the television is to be built into a
compartment or similar enclosure, the
minimum distances must be maintained.
Heat build-up can reduce the service life of
your television, and can also be
dangerous.

-5-

TECHNICAL SPECIFICATIONS

Viewing Picture Size (Diagonal)
Resolution
Aspect Ratio
Brightness

Contrast Ratio

TV System

Input Power Voltage
Power Consumption

Audio Output Power
Signal Input

Signal Output

（THD 10%

Unit Size
Unit Size (Without Stand)

Net Weight

43"
3840 x 2160
16 : 9
250cd/m²

5000:1

PAL-B/G, I, D/K
SECAM-B/G , D/K , L
DVB-T, DVB-T2

AC 100-240V 50/60Hz

78W

）

2x8W
High-Definition Multimedia Interface (HDMI) x 4

AV IN x 1
RJ45 x 1
USB x 3
ANT x 1

HEADPHONE x 1
OPTICAL x 1

960x220x616mm
960x62x556mm

7.3KG

-6-

INSTALLATION

INSTALLATION

* Locate the TV where light does not shine onto the screen.
* Total darkness or reflection on the screen can cause eyestrain. A soft lighting environment is recommended for
comfortable viewing.
* Allow ample space between the TV and wall for proper ventilation.
* Do not locate the TV in a damp or hot environment to prevent damage.
* To prevent damage whilst in use, do not cover ventilation openings.

BASE STAND ASSEMBLY INSTRUCTION

Place the TV with the display side down on a flat surface. Ensure the table or desk you use
provides a flat, totally clean surface and use a soft cloth between the face of the TV and the table to
protect the TV's screen.

1. Place the TV face down on a cloth or towel on a flat surface. Insert the stands into the grooves
on the bottom of the TV, then align the screw holes on the bottom of the TV and the stands.

2. Use the 4 provided screws to attach the stands to the TV.

M4X14MM M4X14MM

-7-

200

INSTALLATION

200

-8-