JVC AV-36330, AV-32330, AV-32360, AV-32S36, AV-36320 User Manual
...
COLOR TELEVISION
USER'S GUIDE
For models:
AV-36360
AV-36330
AV-36320
AV-36S36
AV-36S33
AV-32360
AV-32330
AV-32320
AV-32S36
AV-32S33
Illustration of AV-32360 and RM-C254
IMPORT ANT NOTE TO THE CUSTOMER
In the spaces below, enter the model and serial number of your television (located at the
rear of the television cabinet). Staple your sales receipt or invoice to the inside cover of this
guide. Keep this user's guide in a convenient place for future reference. Keep the carton and
original packaging for future use.
Model Number
Serial Number
LCT1135-001A-A
0202-TN-FAA-JIM
GE Regular English 3/12/02 2:50 PM Page 1
IMPORTANT SAFETY PRECAUTIONS
WARNING: TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS TV
SET TO RAIN OR MOISTURE.
CAUTION: TO INSURE PERSONAL SAFETY, OBSERVE THE FOLLOWING RULES
REGARDING THE USE OF THIS UNIT.
1. Operate only from the power source specified on the unit.
2. Avoid damaging the AC plug and power cord.
3. Avoid Improper installation and never position the unit where good ventilation is unattainable.
4. Do not allow objects or liquid into the cabinet openings.
5. In the event of trouble, unplug the unit and call a service technician. Do
not attempt to repair it yourself or remove the rear cover.
Changes or modifications not approved by JVC could void the warranty.
* When you don’t use this TV set for a long period of time, be sure to dis-
connect both the power plug from the AC outlet and antenna for your
safety.
* To prevent electric shock do not use this polarized plug with an exten-
sion cord, receptacle or other outlet unless the blades can be fully inserted to prevent blade exposure.
CAUTION: To reduce the risk of electric shoc k.
Do not remove cover (or back).
No user serviceable parts inside.
Refer servicing to qualified service personnel.
The lightning flash with arrowhead symbol, within an
equilateral triangle is intended to alert the user to the
presence of uninsulated “dangerous voltage”within the
product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is
intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in
the literature accompanying the appliance.
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION
GE Regular English 3/12/02 2:50 PM Page 2
IMPORTANT SAFEGUARDS
CAUTION:
Please read and retain for your safety.
Electrical energy can perform many useful functions.This TV set has been engineered and
manufactured to assure your personal safety. But improper use can result in potential electrical
shock or fire hazards.In order not to defeat the safeguards incorporated in this TV set, observe
the following basic rules for its installation, use and servicing.
And also follow all warnings and instructions marked on your TV set.
INSTALLATION
1 Your TV set is equipped with a polarized AC line plug (one blade
of the plug is wider than the other).This safety feature allows
the plug to fit into the power outlet only one way. Should you be
unable to insert the plug fully into the outlet, try reversing the
plug. Should it still fail to fit, contact your electrician.
2 Operate the TV set only from a power source as indicated on the TVset or refer to the oper-
ating instructions for this information. If you are not sure of the type of power supply to your
home, consult your TV set dealer or local power company.For battery operation, refer to the
operating instructions.
3 Overloaded AC outlets and extension cords are dangerous, and so are frayed power cords
and broken plugs.They may result in a shock or fire hazard. Call your service technician for
replacement.
4 Do not allow anything to rest on or roll over the power cord, and do not place the TV set
where power cord is subject to traffic or abuse.This may result in a shock or fire hazard.
5 Do not use this TV set near water — for example, near a bathtub, washbowl, kitchen sink, or
laundry tub, in a wet basement, or near swimming pool, etc.
6 If an outside antenna is connected to the TV set, be sure the antenna system is grounded so
as to provide some protection against voltage surges and built-up static charges.Section
810 of the National Electrical Code provides information with respect to proper grounding of
the mast and supporting structure, grounding of the lead-in wire to an antenna discharge
unit, size of grounding conductors, location of antenna discharge unit, connection requirements for the grounding electrode.
(POLARIZED-TYPE)
IMPORTANT RECYCLING INFORMATION
This product utilizes both a Cathode Ray Tube (CRT) and other components that contain lead. Disposal of these materials may be regulated in your community due to environmental considerations. For
disposal or recycling information, please contact your local authorities, or the Electronic Industries Alliance: http://www.eiae.org
GE Regular English 3/12/02 2:50 PM Page 3
7 An outside antenna system should not be located in the vicinity of overhead power lines or
other electric light or power circuits, or where it can fall into such power lines or circuits.
When installing an outside antenna system, extreme care should be taken to keep from
touching such power lines or circuits as contact with them might be fatal.
8 TV sets are provided with ventilation openings in the cabinet to allow heat generated during
operation to be released.
Therefore:
— Never block the bottom ventilation slots of a portable TV set by placing it on a bed, sofa,
rug, etc.
— Never place a TV set in a “built-in” enclosure unless proper ventilation is provided.
— Never cover the openings with a cloth or other material.
— Never place the TV set near or over a radiator or heat register.
9 To avoid personal injury:
— Do not place a TV set on a sloping shelf unless properly secured.
— Use only a cart or stand recommended by the TV set manufacturer.
— Do not try to roll a cart with small casters across thresholds or deep pile car pets.
— Wall or shelf mounting should follow the manufacturer’s instructions, and should use a
mounting kit approved by the manufacturer.
USE
10 Caution children about dropping or pushing objects into the TV set through cabinet open-
ings. Some internal parts carr y hazardous voltages and contact can result in a fire or electrical shock.
11 Unplug the TV set from the wall outlet before cleaning.Do not use liquid or an aerosol
cleaner.
12 Never add accessories to a TV set that has not been designed for this purpose. Such addi-
tions may result in a hazard.
EXAMPLE OF ANTENNA GROUNDING
AS PER NATIONAL ELECTRICAL CODE
GE Regular English 3/12/02 2:50 PM Page 4
13 For added protection of the TVset during a lightning storm or when the TV set is to be left
unattended for an extended period of time, unplug it from the wall outlet and disconnect the
antenna.This will prevent damage to product due to lightning storms or power line surges.
14 A TV set and cart combination should be moved with care. Quick stops, excessive force,
and uneven surfaces may cause the TV set and car t combination to overtur n.
SERVICE
15 Unplug this TV set from the wall outlet and refer ser vicing to qualified ser vice personnel
under the following conditions:
A.When the power cord or plug is damaged or frayed.
B. If liquid has been spilled into the TV set.
C. If the TV set has been exposed to rain or water.
D. If the TV set does not operate normally by following the operating instructions. Adjust
only those controls that are covered in the operating instructions as improper adjustment
of other controls may result in damage and will often require extensive work by a qualified technician to restore the TV set to normal operation.
E. If the TV set has been dropped or damaged in any way.
F. When the TV set exhibits a distinct change in performance — this indicates a need for
service.
16 Do not attempt to service this TV set yourself as opening or removing covers may expose
you to dangerous voltage or other hazards.Refer all servicing to qualified service personnel.
17 When replacement par ts are required, have the service technician verify in writing that the
replacement parts he uses have the same safety characteristics as the original parts. Use
of manufacturer’s specified replacement par ts can prevent fire, shock, or other hazards.
18 Upon completion of any service or repairs to this TV set, please ask the service technician
to perform the safety check described in the manufacturer’s service literature.
19 When a TV set reaches the end of its useful life, improper disposal could result in a picture
tube implosion. Ask a qualified service technician to dispose of the TV set.
20 Note to CATV system installer.
This reminder is provided to call the CATV system installer’s attention to Article 820-40 of
the NEC that provides guidelines for proper grounding and, in particular, specifies that the
cable ground shall be connected to the grounding system of the building, as close to the
point of cable entry as practical.
GE Regular English 3/12/02 2:50 PM Page 5
Table of Contents
UNPACKING YOUR TV . ....7
TV Models and
Remote Controls . .......8
Quick Setup Guide . ......11
Connections . .........14
Cable and VCR Connections . ......14
Connecting to a DVDPlayer . .......17
Connecting to an External Amplifier . ...18
Connecting to a Camcorder . .......18
Remote Control . ........19
Remote Control Basics . ....19
Changing the Batteries . ....19
Remote Programming . ....20
CATV and Satellite Codes . ........20
VCR Codes . ...............21
DVD Codes . ...............22
Onscreen Menus . .......23
Using the Guide . .............23
Onscreen Menu System . .........24
Plug In Menu . ..............25
Introduction . ..........25
Language . . . . ........25
Auto Tuner Setup . .......25
Auto Clock Set . ........26
Manual Clock Set . .......27
Channel Summary . ............28
V-Chip . ..................29
US V-Chip Ratings . ......30
Viewing Guidelines . ......30
Setting US V-Chip Ratings . . . 31
Movie Ratings . .........33
Set Movie Ratings . ......33
Canadian V-Chip Ratings . . . . 34
Set Canadian V-Chip Ratings . 34
Unrated Programs . ......35
Set Lock Code . ........36
Picture Settings . .............37
Tint . ..............37
Color . .............37
Picture . ............37
Bright . .............37
Detail . .............37
Noise Muting . .........38
Onscreen Menus (Cont.)
Sound Settings . . ............39
Bass . .............39
Treble...............39
Balance. . ............39
MTS (Multi-channel Sound . . . 39
General Items . ..............40
On/Off Timer . .........40
Closed Caption . ........41
Front Panel Lock . .......41
Auto Shut Off . .......42
XDS ID . ............42
V2 Component-In/
V1 Component-In . .......42
BUTTON FUNCTIONS . ....43
Menu ....................43
Exit and PIP Off . .............43
Display . ..................43
Video Status . . ..............44
Sleep Timer . ...............44
Hyper Surround . .............44
Muting . ..................44
100+ . ...................45
Return+ . .................45
Input . . . .................45
VCR Buttons . . . .............46
DVD Buttons . ...............46
TV/CATV Switch . . . . ..........46
VCR/DVD Switch . ............46
PIP (Picture-In-Picture) . .........47
Introduction . ..........47
On/Move . ...........47
Freeze . ............48
Swap ..............48
Channel +/- . ..........48
Source . . . . . ........48
EZ-Surf . ............48
APPENDICES
Troubleshooting . .............49
Warranty . .................50
Authorized Service Centers . .......52
Search Codes . ..............53
Specifications . . .............54
Note . ...................55
GE Regular English 3/12/02 2:50 PM Page 6
VIDEO
L MONO
AUDIO R
INPUT 2
Two AA
Batteries
1 Television
1 Remote
Control
Thank you for your purchase of a JVC Color Television. Before you begin setting up your new
television, please check to make sure you have all of the following items. In addition to this
guide, your television box should include:
Once you have unpacked your television, the next step is to connect it to your antenna/cable
or satellite system and to connect the audio/video devices you want to use with your television.To make these connections you will use plugs like the ones illustrated below.
A/V Input Plug
RF Connectors
Used to connect a
coaxial cable from an
external antenna or
Cable TV system.
A matching TV stand
is also available
(optional).
Used to make video connections with VCRs,
DVDs, Camcorders, etc
(optional).
Used to connect
audio/video devices like
VCRs, DVD players,
stereo amplifiers, game
consoles, etc.
S-Video Plug
We recommend that before you start using your new television, you read your entire User’s
Guide so you can learn about your new television’s many great features. But if you’re anxious
to start using your television right away, a quick setup guide follows on pages 11 - 13.
Unpacking Y our T elevision
7
Note:Your television
and/or remote control
may differ from the
examples illustrated
here.
GE Regular English 3/12/02 2:50 PM Page 7
TV Models and Remotes Guide
NOTE: Before you connect your televison to another device, please refer to the proper dia-
grams for your TV and remote, depending on the model that you have purchased.
These will help assist you in understanding how to connect your television to another
device, as well as use the remote to set up your televison.
Rear Panel Diagrams
8
MODELS: AV-36360, AV-36330, AV-36S36, AV-36S33, AV-32360, AV-32330, AV-32S36 and
AV-32S33
MODELS: AV-36320 and AV-32320
GE Regular English 3/12/02 2:50 PM Page 8
Front Panel Diagrams
MODELS: AV-32360, AV-32330, AV-32S36 and AV-32S33
MODELS: AV-36360, AV-36330, AV-36S36 and AV-36S33
MODEL: AV-36320
TV Models and Remotes Guide
MODEL: AV-32320
9
GE Regular English 3/12/02 2:50 PM Page 9
TV Models and Remotes Guide
Remote Control RM-C255
MODELS: AV-36330,
AV-36S33,
AV-32330,
AV-32S33
10
Remote Control RM-C205
MODELS: AV-36320,
AV-32320
Remote Control RM-C254
MODELS: AV-36360,
AV-36S36,
AV-32360,
AV-32S36
GE Regular English 3/12/02 2:50 PM Page 10
VIDEO
STATUS
DISPLAY
MUTING
MENU
1
4
7
100+
VOL
VCR CONTROL
CHANNEL
SLEEP
TIMER
2
5
8
0
+
CH
CH
POWER TV/VCR
PLAY FFREW
VOL
+
POWER
INPUT
3
6
9
RETURN+
V—CHIP
EXIT
REC STOP
RM-C205
PAUSE
11
Getting Started
These quick setup pages will provide you, in three easy steps, with the basic infor mation you
need to begin using your new television right away.This information includes basic instructions
on operating your remote control, making a simple cable/antenna and optional VCR connection
and, finally, information on programming your television's Auto Tuner.
If you have questions, or for more detailed information on any of these steps, please consult
other sections of this manual.
Step One - The Remote Control
The remote control is the key to operating your television's many great features. Before you can
operate your remote control, you first need to install the batteries (included).
For RM-C255 and RM-C254, lift and pull the latch on the back of the remote to open. For
RM-C205, raise the latch on the remote’s back cover to remove. Insert two batteries (included)
carefully noting the “+” and “–” markings, placing the “–” end in the unit first. Snap the cover
back into place.
Basic Operation
Turn the television on and off by pressing the POWER button at the top right corner of
the remote.
The four key feature buttons at the center of the remote can be
used for basic operation of the television.The top and bottom
buttons will scan forward an back through the available channels.The r ight and left buttons will turn the volume up or down.
These buttons are also marked with four arrows and are also
used with JVC's onscreen menu system.You will need to use
these buttons later in the Quick Setup.
The next step is to connect your television to an antenna or
cable.
Note: Illustration of remote control RM-C254
"
Proceed to Step Two
Quick Setup 1
RM-C205 ONLY
RM-C255 and RM-C254
GE Regular English 3/12/02 2:50 PM Page 11
POWER
12
WALL
CABLE or ANTENNA
OUT
OR
OR
VCR
IN
Cable/RF connector
AV Cables/Plugs
Step Two - Making Basic Connections
Next you will need to connect your television to an antenna or cable system. The most basic
antenna/cable connection is shown below. For more detailed connections, such as ones where
a cable box is required, see pages 15 to 16.
You may also wish to connect a VCR at this point.A basic VCR connection is shown below. For
detailed instructions on connecting a other components or a home theater system, see pages
15 to 17.
Note: A VCR is not required to operate your television.
1) Connect the yellow video cable out from the VCR’s Video Output, in to the TV’s Video Input
jack, OR connect an S-Video cable from the VCR’s S-Video output, to the TV’s S-Video
input.
2) Connect the white audio cable out from the VCR’s Left Audio Output, in to the TV’s Left
Audio Input Jack.
3) Connect the red audio cable out from the VCR’s Right Audio Output, in to the TV’s Right
Audio Input jack.
Finally, once you have finished your connections, plug the power cord into the nearest power
outlet and turn on the television.
1) Connect an RF cable out from the wall outlet in to the RF Input on the back of the TV.
"
Proceed to Step Three
Quick Setup 2
Illustration of AV-32360
Illustration of AV-32360
GE Regular English 3/12/02 2:50 PM Page 12
13
Press the
"#
buttons to move to AUTO
TUNER SETUP
Press the
$%
buttons to begin AUTO
TUNER SETUP
$%!!
To choose CABLE (if you are connected
to a cable system) or AIR (if you use
an antenna)
"#!
To move to START
$%!!
To start Auto Tuner Setup
The Auto Tuner will now memorize all of the clear, active channels your television can
receive.This will take one or two minutes.
Step Three - The Plug In Menu
When you turn your television on for the first time the Plug In Menu will appear. This menu sets
some of the basic settings for your television.A complete description of the Plug In Menu can
be found starting on page 25. We recommend you complete the Plug In Menu items before you
start using your television. But to begin watching your television right away you only need to run
the Auto Tuner Setup.This lets your television learn the channels it is able to receive.To run the
Auto Tuner Setup follow the steps below.
The Auto Tuner is finished when the message PROGRAMMING OVER! appears onscreen.
Your Quick Setup is now complete.You can now begin watching your television, or you can
continue on in this guide for more information on connecting audio/video devices, programming
your remote control, or using the JVC onscreen menu system to customize your television
viewing experience.
The Quick Setup is complete
Quick Setup 3
GE Regular English 3/12/02 2:50 PM Page 13
STOP
Connections
1) Connect the antenna or cable TV wire from the wall outlet, in to the RF Input of the two-way
splitter.
2) Connect an RF cable from the one of the RF Outputs on the splitter, in to the RF Input on
the back of the VCR.
3) Connect an RF cable from the other the RF Output on the splitter, in to the RF Input on the
back of the TV.
4) Connect the yellow video cable out from the VCR’s Video Output, in to the TV’s Video Input
jack, OR connect an S-Video cable from the VCR’s S-Video output, to the TV’s S-Video
input.
5) Connect the white audio cable out from the VCR’s Left Audio Output, in to the TV’s Left
Audio Input Jack.
6) Connect the red audio cable out from the VCR’s Right Audio Output, in to the TV’s Right
Audio Input jack.
• If your VCRis a mono sound unit, it will have only one Audio Out jack. Connect it to the TV’s
Left Audio Input.
• Please consult your VCR’s owner’s manual for more information on its operation.
Cable and VCR Connections
14
Illustration of AV-32360
Diagram #1
There are three basic types of antenna or cable connections:
• If you have an antenna or have a cable system that does not require you use a cable box
to select channels, please refer to Diagram #1.
• If you have a cable system that requires the use of a cable box to access all the channels,
please refer to Diagram #2.If you cannot operate your Picture-In-Picture function using
Diagram #2, try the connection shown in Diagram #3. It is possible your cable box allows
the signal of only one channel at a time to be sent to your television.
• If you have a cable system that requires the use of a cable box to access certain premium
channels, but not “basic”cable channels, please refer to Diagram #3.
• For your convenience, connection to a VCR is also shown in the following diagrams. A
VCR is not necessary for operation of the television or Picture-In-Picture (PIP) function.You may omit the VCR from your connections if you wish.
• For instructions on connecting a VCR only, please see the Quick Setup on page 12.
• For information on using PIP, please see page 47.
• The PIP feature is available on AV-36360, AV-36S36, AV-32360 and AV-32S36 models
only.
GE Regular English 3/12/02 2:50 PM Page 14
WALL
CABLE or ANTENNA
OUT
TWO-WAY
SPLITTER
VCR
OR
OR
Connections
15
1) Connect the antenna or cable TV wire from the wall outlet, in to the RF Input of the cable
box.
2) Connect an RF cable from the RF Output of the cable box, in to the RF Input on the back of
the VCR.
3) Connect an RF cable from the RF Output of the VCR, in to the RF Input on the back of the
TV.
4) Connect the yellow video cable out from the VCR’s Video Output, in to the TV’s Video Input
jack, OR connect an S-Video cable from the VCR’s S-Video output, to the TV’s S-Video
input.
5) Connect the white audio cable out from the VCR’s Left Audio Output, in to the TV’s Left
Audio Input Jack.
6) Connect the red audio cable out from the VCR’s Right Audio Output, in to the TV’s Right
Audio Input jack.
• Please see page 47 for information on using the PIP feature with a Cable Box.
• If your VCRis a mono sound unit, it will have only one Audio Out jack. Connect it to the TV’s
Left Audio Input.
• Please consult your VCR’s owner’s manual for more infor mation on its operation.
Cable and VCR Connections - Continued
Illustration of AV-32360
Diagram #2
GE Regular English 3/12/02 2:50 PM Page 15
OR
WALL
CABLE or ANTENNA
OUT
OR
VCR
Connections
16
The connection diagrams are intended to show some basic general connections.
Some cable companies may require special connections to properly use your television or 2-tuner PIP function. If you follow these diagrams and either the television or
PIP does not work properly,contact your local cable operator for more connection
information. Please see page 47 for more information on the PIP feature.
Cable and VCR Connections - Continued
1) Connect the antenna or cable TV wire from the wall outlet, in to the RF Input of the two-way
splitter.
2) Connect an RF cable from the one of the RF Outputs on the splitter, in to the cable box RF
Input.
3) Connect an RF cable from the Cable Box Output, in to the VCRRF Input.
4) Connect an RF cable from the other the RF Output on the splitter, in to the RF Input on the
back of the TV.
5) Connect the yellow video cable out from the VCR’s Video Output, in to the TV’s Video Input
jack, OR connect an S-Video cable from the VCR’s S-Video output, to the TV’s S-Video input.
6) Connect the white audio cable out from the VCR’s Left Audio Output, in to the TV’s Left Audio
Input jack.
7) Connect the red audio cable out from the VCR’s Right Audio Output, in to the TV’s Right Audio
Input jack.
• Please see page 47 for information on using the PIP feature with a Cable Box.
• If your VCRis a mono sound unit, it will have only one Audio Out jack. Connect it to the TV’s
Left Audio Input.
• Please consult your VCR’s owner’s manual for more information on its operation.
Illustration of AV-32360
Diagram #3
GE Regular English 3/12/02 2:51 PM Page 16
OR
WALL
CABLE or ANTENNA
OUT
TWO-WAY
SPLITTER
IN
VCR
OR
Connections
17
1) Connect Green cable out from DVD player “Y”Component Output, in to TV“VIDEO/Y”
Component Input.
2) Connect Blue cable out from DVD player “PB” Component Output, in to TV “PB” Component
Input.
3) Connect Red cable out from DVD Player “P
R” Component Output, in to TV “PR” Component
Input.
4) Connect White Audio cable out from DVD Left Audio Output, in to TV Left Audio Input 2.
5) Connect Red Audio cable out from DVD Right Audio Output, in to TV Right Audio Input 2.
• Green, blue and red are the most common colors for DVD cables. Some models may vary
colors, please consult the user’s manual for your DVD Player for more information.
• Be careful not to confuse the red DVDcable with the red audio cable.It is best to complete
one set of connections (DVDor Audio Output) before starting the other to avoid accidentally
switching the cables.
• See page 22 for instructions on programming your remote control to operate the basic func-
tions of your DVD player.
• AV-36360, AV-36330, AV-36S36, AV-36S33, AV-32360, AV-32330, AV-32S36, AV-32S33:If
you use Input 2 (Component-In) for the DVD connection, you must set the
V2 COMPONENT-IN on the initial Setup Menu to “YES” for proper display of the DVD signal.
• AV-36320 and AV-32320: If you use Input 1 for the DVDconnection, you must set the V1
COMPONENT-IN on the initial Setup Menu to “YES” for proper display of the DVD signal.
NOTE: Progressive DVD Players (players with an output scan of 31.5 KHz) will not work properly with this television.
Connecting to a DVD player
Illustration of AV-32360
GE Regular English 3/12/02 2:51 PM Page 17
AUDIO OUT
R L
DVD Player
Y
Green
B
P
Blue
PR
Red
Loading...