JVC AV-29WS3/M User Manual

COLOUR TELEVISION

INSTRUCTIONS

Thank you for buying this JVC colour television. To make sure you understand how to use your new TV, please read this manual thoroughly before you begin.

S series:

AV-21LS2 AV-21WS3 AV-25LS3 AV-29LS2 AV-29WS3

X series:

AV-20NX3 AV-21DX3 AV-21FX3 AV-21LX2 AV-21WX3 AV-25KX3 AV-25LX3 AV-29LX2 AV-29WX3

Safety precautions 2 Preparation 3

1 Confirm which remote control you have 2 Insert the batteries into the remote control 3 Connecting the aerial and VCR 4 Connecting other devices 5 Connect the power cord to the AC outlet 6 Initial setting

...............................................

..................

..........................

... ...

...

Basic operation 7 Remote control buttons and functions 8

ECO SENSOR button PICTURE MODE button COLOUR SYSTEM button SOUND SYSTEM button

button MUTING button DISPLAY button CINEMA SURROUND button OFF TIMER button CHANNEL SCAN button RETURN + button

.....................................

.................................

.............................

...............................

.............................................

........................

.......................................

..............................

........................................

10 10 10

Viewing teletext programmes 11, 12 Using the TV’s menus 13

Basic operation

...........................................................

INPUT PICTURE TILT

...............................................................

VNR COMPRESS (16:9) AUTO SHUTOFF CHILD LOCK BLUE BACK VIDEO-2 SET Picture Adjustments Sound Adjustments AI VOLUME AUTO CH PRESET MANUAL CH PRESET

..............................................................

SKIP LANGUAGE TEXT LANGUAGE

............................................

...............................................

........................................

..........................................

.................................................

..................................................

................................................

....................................

.....................................

..................................................

.......................................

..................................

..................................................

........................................

13 14 14 14 14 15 15 15 16 16 16 17 17 18 19 19 19

TV buttons and parts 20 Using the buttons on the TV 22 Troubleshooting 23 Specifications Back cover

3 3 4 5 5 6

8 8 8 8 9 9 9 9

LCT1170-001B-H 0602-Ki-NIC-JMT

Safety precautions

WARNING

• To prevent fire or shock hazard, do not expose the TV to rain or moisture.

CAUTION

• Operate only from the power source indicated on the rear of the TV.

• Avoid damaging the power cord and mains plug. When you unplug the TV, pull it out by the mains plug. Do not pull on the power cord.

• Never block or cover the cabinet openings for ventilation. Never install the TV where good ventilation is unattainable. When installing this TV, leave spaces for ventilation around the TV more than the minimum distances shown in the diagram.

• Do not allow objects or liquid into the cabinet openings.

• In the event of a fault, unplug the TV and call a service technician. Do not attempt to repair it by yourself or remove the rear cover.

• The surface of the TV screen is easily damaged. Be very careful with it when handling the TV. Should the TV screen become soiled, wipe it with a soft dry cloth. Never rub it forcefully. Never use any cleaner or detergent on it.

• When you don’t use this TV for a long period of time, be sure to unplug it.

10 cm 15 cm

10 cm

15 cm

WARNING

<AV-21WS3 and AV-21WX3 only>

A removable plastic cover is fixed to the television’s front Audio/Video connector. To prevent this cover from being accidentally swallowed by babies or children, remove it from the television and store it in a safe place. If the cover is swallowed seek the advice of a doctor immediately.

Preparation

MUTING

OFF

TIMER

ECO

SENSOR

PICTURE

MODE

CHANNEL

SCAN

SYSTEM

COLOUR SOUND

CHANNEL

RETURN+

POWER

DISPLAY

TV/VIDEO

VOLUME

123

456

789

0-/

RM-C1024

1 Confirm which remote control you have

Your TV comes with one of the four remote controls shown below. Functions you can operate differ depending on the type of remote control.

<AV-21WS3/AV-25LS3 <AV-20NX3/AV-21DX3 <AV-21LS2/AV-29LS2> <AV-21LX2/AV-29LX2>

/AV-29WS3> /AV-21FX3/AV-21WX3

/AV-25KX3/AV-25LX3

AV-29WX3>

MUTING

SYSTEM

COLOUR SOUND

DISPLAY

Ι/ΙΙ

TV/VIDEO

OFF

TIMER

PICTURE

MODE

CHANNEL

SCAN

CHANNEL

REVEAL

SUBPAGE CANCEL

2 Insert the batteries into the remote control

POWER

CINEMA

SURROUND

ECO

SENSOR

TV/TEXT

123

456

789

RETURN+

0-/

VOLUME

TEXT

SIZE

INDEX

HOLD

STORE MODE

RM-C1010

MUTING

SYSTEM

COLOUR SOUND

DISPLAY

TV/VIDEO

OFF

TIMER

PICTURE

MODE

CHANNEL

SCAN

CHANNEL

POWER

CINEMA

SURROUND

SENSOR

123

456

789

RETURN+

0-/

VOLUME

RM-C1014

MUTING

SYSTEM

ECO

COLOUR SOUND

DISPLAY

Ι/ΙΙ

TV/VIDEO

123

OFF

TIMER

456

PICTURE

MODE

789

CHANNEL

RETURN+

SCAN

REVEAL

SUBPAGE CANCEL

CHANNEL

TEXT

HOLD

INDEX

STORE MODE

RM-C1020

0-/

VOLUME

Correctly insert two batteries, observing the , and . polarities and inserting the . end first.

CAUTION:

Follow the cautions printed on the batteries.

Notes:

• Use AA/R6/UM-3 dry cell batteries.

• If the remote control does not work properly, fit new

batteries. The supplied batteries are for testing, not regular use.

POWER

ECO

SENSOR

TV/TEXT

SIZE

Preparation

3 Connecting the aerial and VCR

• Read the manuals provided with the devices. Depending on the device, the connection method may be different from the diagrams. Also the device settings may need to change depending on the connection method.

• Turn off all the devices including the TV.

• Connecting cables are not supplied.

• When connecting monaural audio to the TV, use the L/MONO jack.

• If your TV has an S-connector, you can connect an S-VIDEO compatible device (such as an S-

VHS VCR) to the S-connector with an S-VIDEO cable and enjoy the high quality picture of the SVIDEO signal (Y/C signal). In that case, do not connect it to the TV with a video cable.

• If you connect the VCR to the TV only with an aerial cable, you should preset the video channel from the VCR to the AV channel (channel number 0) on this TV. See “MANUAL CH PRESET” on page 18 and preset it manually.

Connecting the aerial

VIDEO-1

INPUT

COMPONENT

(

)

VIDEO-2

INPUT

OUTPUT

VHF/UHF outdoor aerial

MONO

RRRC

MONO

Connecting the aerial and VCR

To video output

To S-video output

VCR

To audio output

To aerial input

To RF output

VIDEO-1

INPUT

OVER

MONO

RRRC

COMPONENT

(

VIDEO-2

INPUT

)

MONO

VHF/UHF outdoor aerial

OUTPUT

Preparation

4 Connecting other devices

If you are not connecting any other devices, skip step 4 and perform step 5.

• Use the headphones with a stereo mini jack (3.5 mm in diameter). When you connect the headphones, the TV speakers go off.

• The OUTPUT terminal outputs the video and sound signals which you are viewing on the TV. You can dub them onto the VCR connected to the OUTPUT terminal. (The OUTPUT terminal cannot output teletext programmes, S-VIDEO signals or component video signals. Also it cannot output any signals when the TV is turned off.)

• Connect components outputting a component signal (Y/C the VIDEO-2 terminal, and set VIDEO-2 SET function to “COMPONENT”. (See page 16.)

• The following illustrations are for the AV-29LS2. Your TV’s front and rear pannels may not look exactly like the illustrations.

B/CR signal), such as a DVD player, to

Front

Headphones

Rear

VIDEO-1

INPUT

MONO

RRR

COMPONENT

(

VIDEO-2

INPUT

MONO

)

OUTPUT

L/MONOVR

IN (VIDEO-3)

Camcorder or TV game

VCR (for playing) DVD player

(composite signals)

VCR (for recording)

DVD player

(component video signals)

5 Connect the power cord to the AC outlet

Operate only from the power source indicated on the rear of the TV.

Preparation

OFF

TIMER

ECO

SENSOR

SYSTEM

COLOUR SOUND

CINEMA

SURROUND

DISPLAY

Ι/ΙΙ

TV/TEXT

TV/VIDEO

123

DISPLAY

button

MENU t

buttons

6 Initial setting

When the TV is first turned on, it enters the initial setting mode, and the JVC logo is displayed. Follow the instructions on the on-screen display to perform the initial settings.

1 Press the Main power button

on the TV.

The POWER lamp lights. After the JVC logo has been displayed, the TV automatically switches to the language setting mode.

MENU 3 AUTO CH PRESET MANUAL CH PRESET LANGUAGE ENGLISH TEXT LANGUAGE GROUP1

SELECT BY EXIT BY OPERATE BY -+

• The JVC logo does not appear if your TV has been turned on once before. In this case, use the LANGUAGE and AUTO CH PRESET functions to perform the initial settings. For details, see pages 17 and 19.

DISPLAY

POWER lamp Main power button

2 Press the MENU

buttons to select language.

3 Press the MENU T buttons to select “AUTO CH PRESET”.

4 Press the MENU

“>>>ON SEARCH” is displayed on the screen.

When all the TV channels that can be received on your TV have been preset, the display goes out and the AUTO CH PRESET function operation is completed.

To stop the AUTO CH PRESET function, press the MENU

• If a TV channel you want to view is not set to the channel, set it with the MANUAL CH PRESET function. For details, see page 18.

This completes initial setting. Now you’re ready to enjoy your JVC TV.

buttons to start the AUTO CH PRESET function.

buttons.

Basic operation

• The illustration below is for the remote control RM-C1010. Depending on the applicable models, the remote controls may not look exactly the same.

SURROUND

TEXT

CINEMA

0-/

VOLUME

INDEX

POWER

ECO

SENSOR

TV/TEXT

SIZE

MUTING

SYSTEM

COLOUR SOUND

DISPLAY

Ι/ΙΙ

TV/VIDEO

123

OFF

TIMER

456

PICTURE

MODE

789

CHANNEL

RETURN+

SCAN

CHANNEL

REVEAL

HOLD

SUBPAGE CANCEL

STORE MODE

RM-C1010

1 Press the POWER button to turn

your TV on.

• If your TV does not turn on, press the Main power button on the TV then press the POWER button again.

• You can also turn on your TV by pressing any of the following buttons;

- the CHANNEL m button

- the Number buttons

- the TV/VIDEO button

2 Select a channel.

■ Press the CHANNEL m button.

• Up/down selection cannot be selected for channels to which the SKIP has been set to “YES”. See page 19.

■ Press the Number buttons to enter the channel number.

• If you want to enter a two-digit number,

press the -/-- button to select the two digit mode “--”, then enter the channel number.

3 Press the VOLUME M button to

adjust the sound.

4 To turn your TV off, press the

POWER button.

• We recommend that you press the Main

power button on the TV to turn the main power off if you do not plan to use your TV for a long time or if you wish to save energy.

If the picture is not clear:

Press the COLOUR SYSTEM button to select another colour system, see page 8.

If the sound is not clear:

Press the SOUND SYSTEM button to select another sound system, see page 8.

Viewing Images from an External Device:

Press the TV/VIDEO button to select the VIDEO mode.

• You can also use the INPUT function to select the VIDEO mode. For details, refer to page 14.

Remote control buttons and functions

ECO SENSOR button

You can adjust this TV so that the screen automatically adjusts to the optimum contrast according to the brightness of your room. This function reduces eye strain and the power consumption of this TV.

Press this button to select the desired mode.

DIGITAL ECO SENSOR DISPLAY:

The ECO SENSOR function switches on. In this mode, the clover mark indicating the brightness of your room is displayed for several seconds each time the brightness changes. The number of clover marks displayed on screen increases as your room becomes darker.

DIGITAL ECO SENSOR ON:

The ECO SENSOR function switches on. However, in this mode, the clover mark will not be displayed.

DIGITAL ECO SENSOR OFF:

The ECO SENSOR function switches off.

PICTURE MODE button

You can select one of three picture adjustment settings as you like.

Press this button to select a mode.

BRIGHT:

Heightens contrast and sharpness.

STANDARD:

Standardizes picture adjustments.

COLOUR SYSTEM button

If the picture is not clear or no colour appears, change the current colour system to another colour system.

Press this button to select the colour system.

AUTO PAL

NTSC4.43

SECAM

NTSC3.58

AUTO:

Automatic colour system selection.

• For the colour systems in each country or region, see the table “Broadcasting systems” on the back cover.

• If the picture is not normal in the AUTO mode, change the AUTO mode to another colour system.

SOUND SYSTEM button

If the sound is not clear even when the picture appears normal, change the current sound system to another sound system.

Press this button to select the sound system.

B/G I D/K M

• For the sound systems in each country or region, see the table “Broadcasting systems” on the back cover.

• You cannot select any sound system when in a VIDEO mode.

SOFT:

Softens contrast and sharpness.

• Pressing this button returns all the picture

settings in “MENU 4” to their default settings.

+ 16 hidden pages

JVC AV-29WS3/M User Manual

Contents

Safety precautions

Preparation

Basic operation

Remote control buttons and functions