JVC AV-28T4SR, AV-28T4SK, AV-28T4BR, AV-28T4BK, AV-32T4SR User Manual
AV-32T4SK
AV-28T4SK
AV-28T4BK
AV-32T4SR
AV-28T4SR
AV-28T4BR
COLOUR TELEVISION
INSTRUCTIONS
Warning
DO NOT cut off the mains plug from this
equipment.
for the power points in your home or the cable
is too short to reach a power point, then obtain
an appropriate safety approved extension lead
or adaptor or consult your dealer.
If nonetheless the mains plug is cut off,
remove the fuse and dispose of the plug
immediately, to avoid a possible shock
hazard by inadvertent connection to the
mains supply.
If a new mains plug has to be fitted, then
follow the instruction given below:
Important
Do not make any connection to the larger
terminal which is marked with the letter E or
by the safety earth symbol or coloured
green or green-and-yellow.
The wires in the mains lead on this product
are coloured in accordance with the
following code:
Blue: Neutral
Brown: Live
Guidelines for safe operation
This equipment has been designed and manufactured to comply with international safety
standards. However, as with any electrical appliance, care must be taken to ensure optimal results
and operational safety.
• Before attempting to use this equipment, read the operating instructions thoroughly.
• Ensure that all electrical connections (including the mains plug, extension leads, etc.) have
been made in accordance with the manufacturer’s instructions.
• If ever in doubt about the installation, operation or safety of this equipment, consult your dealer.
• Handle all glass panels or covers with care.
• Never operate this equipment if it appears damaged or operates abnormally. Turn the power
off, disconnect the main power plug and consult your dealer.
• Never remove any affixed panels or covers. Doing so may result in electrical shock.
• Never leave this equipment operating unattended unless otherwise specifically stated that it is
designed to do so or in standby mode. Only use the designated power switch to turn off the
power and ensure that all potential users are instructed how to do so. Make special
arrangements for infirm or handicapped persons.
• Never watch TV while operating a motor vehicle. It is illegal to watch TV while driving.
• Never listen to headphones at high volume. Doing so may damage your hearing.
• Never obstruct the ventilation of this equipment. Doing so may cause overheating and result in
a malfunction or damage.
• Never use makeshift stands or attempt to affix legs with wood screws. When using a
manufacturer’s approved stand or legs, use only the fixtures provided and follow the
installation instructions.
• Never allow this equipment to be exposed to rain or moisture.
• Never allow anyone, especially children, to insert anything into an opening in the case. Doing
so may result in a fatal electrical shock.
• Never guess or take chances with electrical equipment of any kind. It is better to be safe than sorry.
If the plug fitted is not suitable
As these colours may not correspond with the
coloured marking identifying the terminals in
your plug proceed as follows:
The wire which is coloured blue must be
connected to the terminal which is marked
with the letter N or coloured black.
The wire which is coloured brown must be
connected to the terminal which is marked
with the letter L or coloured red.
When replacing the fuse, use only a correctly
rated approved type and always re-fit the fuse
cover.
If in doubt — consult a competent
electrician.
How to replace the fuse
Open the fuse
compartment with a
blade screwdriver, and
replace the fuse.
2
Fuse
Thank you for buying this JVC colour television.
To make sure you understand how to use your new TV, please read this manual thoroughly before you
begin.
WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS
APPLIANCE TO RAIN OR MOISTURE.
CAUTION:
• Operate only from the power source specified
(AC 220 – 240 V, 50 Hz) on the unit.
• Avoid damaging the AC plug and power cord.
• When you are not using this unit for a long
period of time, it is recommended that you
disconnect the power cord from the main
outlet.
Avoid improper installation and never put the unit where good
ventilation is not possible.
When installing this TV, distance recommendations must be
maintained between the set and the wall, as well as inside a tightly
enclosed area or piece of furniture.
Adhere to the minimum distance guidelines shown for safe operation.
• The main power button on the TV does not
fully isolate the TV from the mains supply. If
you are not going to use this TV for a long
period of time, be sure to disconnect the mains
plug from the mains outlet.
Failure to heed the following precautions may result in damage to the TV or
remote control.
DO NOT block the TV’s ventilation openings or holes.
(If the ventilation openings or holes are blocked by a newspaper or cloth, etc., the heat may not be
able to get out.)
DO NOT place anything on top of the TV.
(such as cosmetics or medicines, flower vases, potted plants, cups, etc.)
DO NOT allow objects or liquid into the cabinet openings.
(If water or liquid is allowed to enter this equipment, fire or electric shock may be caused.)
DO NOT place any naked flame sources, such as lighted candles, on the TV.
The surface of the TV screen is easily damaged. Be very careful with it when handling the TV.
Should the TV screen become soiled, wipe it with a soft dry cloth. Never rub it forcefully.
Never use any cleaner or detergent on it.
In the event of a fault, unplug the unit and call a service technician. Do not attempt to repair it
yourself or remove the rear cover.
3
CONTENTS
Setting up your TV ...................................5
Connecting the aerial and video cassette
recorder (VCR) ....................................... 5
Connecting the power cord to the AC
outlet....................................................... 6
Putting the batteries into the remote
control..................................................... 6
Initial settings ............................................. 6
T-V LINK functions..................................... 8
TV buttons and functions......................10
Turn the main power on ........................... 10
Turn the TV on from standby mode ......... 10
Choose a TV channel .............................. 10
Adjust the volume .................................... 10
Remote control buttons and
functions..............................................11
Turn the TV on or off from standby mode
Choose a TV channel and watch images
from external devices ........................... 12
Adjust the volume .................................... 12
Information function ................................. 13
ZOOM function......................................... 13
HYPER SOUND function ......................... 14
Return to TV channel instantly................. 14
Operating a JVC brand VCR or DVD
player.................................................... 15
.. 11
Teletext function ....................................16
Basic operation ........................................ 16
Using the List Mode ................................. 16
Hold.......................................................... 17
Sub-page ................................................. 17
Reveal...................................................... 17
Size .......................................................... 17
Index ........................................................ 17
Cancel...................................................... 18
Using the TV’s menu..............................19
Basic operation ........................................ 19
PICTURE menu.......................................20
PICTURE MODE ..................................... 20
CONTRAST ............................................. 20
BRIGHT ................................................... 20
SHARP..................................................... 20
COLOUR.................................................. 20
HUE ......................................................... 20
COLOUR TEMP....................................... 20
FEATURES.............................................. 21
SOUND menu ......................................... 23
STEREO / I • II ......................................... 23
BASS........................................................ 23
TREBLE ................................................... 23
BALANCE ................................................ 23
HYPER SOUND....................................... 23
FEATURES menu................................... 24
SLEEP TIMER ......................................... 24
BLUE BACK ............................................. 24
CHILD LOCK............................................ 24
SET UP menu ......................................... 26
AUTO PROGRAM.................................... 26
EDIT/MANUAL ......................................... 26
LANGUAGE ............................................. 31
DECODER (EXT-2).................................. 31
EXT SETTING.......................................... 32
PICTURE TILT ......................................... 34
Additional preparation ..........................35
Connecting external equipment ...............35
Troubleshooting ....................................37
Specifications ........................................ 39
4
Setting up your TV
Caution
• Turn off all the equipment including the TV before connecting anything.
Connecting the aerial and video cassette recorder (VCR)
• The connecting cables are not provided.
• For further details, refer to the manuals provided with the devices to be connected.
If you are connecting a VCR,
follow AAAA →→→→ BBBB →→→→ CCCC in the diagram
opposite.
If you are not connecting a VCR,
follow 1111.
To use the T-V LINK functions, you must
have a T-V LINK compatible VCR
connected by a SCART cable C to the EXT2 terminal on the TV. For details about T-V
LINK functions, see “T-V LINK functions”
on page 8.
• You can watch a video using the VCR
without doing C. For details, see your
VCR instruction manual.
• To connect more equipment, please see
“Connecting external equipment” on
page 35.
• If you connect a decoder to a T-V LINK
compatible VCR, set the DECODER
(EXT-2) function to ON. For details, see
“DECODER (EXT-2)” on page 31.
Otherwise, you will not be able to watch
scrambled channels.
Back of the TV
21-pin
SCART Cable
VCR
AV IN/OUT
Terminal
75-ohm
Coaxial Cable
75-ohm
Coaxial
Cable
To Aerial
Input
To Aerial
Output
Aerial
Rear Panel
1 EXT-1 terminal (pages 5, 32, 35)
2 EXT-2 terminal (pages 5, 8, 32, 35)
3 EXT-3 terminal (pages 32, 35)
4 Aerial socket (page 5)
5
Setting up your TV
0
Connecting the power cord to
the AC outlet
Caution
• Operate only from the power source specified
(AC 220 – 240 V, 50 Hz) on the unit.
Putting the batteries into the
remote control
Use two AA/R6 dry cell batteries.
Insert the batteries from the - end, making
sure the + and - polarities are correct.
• Follow the warnings printed on the
batteries.
• Battery life is about six months to one
year, depending on how much you use the
remote control.
• The batteries we supply are only for
setting up and testing your TV, please
replace them as soon as you need to.
• If the remote control does not work
properly, replace the batteries.
Initial settings
When the TV is first turned on, it goes into
the initial settings mode, and you will see the
JVC logo. Follow the instructions on the
screen display to make the initial settings.
1 Press the main power button on the
TV
The power lamp lights red and the JVC
logo appears.
Power lamp
• If the JVC logo does not appear this is
because your TV has already been
turned on for the first time:
use the “LANGUAGE” and “AUTO
PROGRAM” functions to make the
initial settings. For details, see “SET
UP menu” on page 26.
2 Press the a button
The LANGUAGE menu appears.
LANGUAGE
AV
MENU
P
TV OK
Blue button
Main power
button
TV OK
D0002-EK
• To receive SKY 1 you need a satellite
tuner. You must have the satellite tuner
set to SKY 1 before starting the AUTO
PROGRAM function which follows.
6
Setting up your TV
3 Press the aaaa button to start the
AUTO PROGRAM function
The AUTO PROGRAM menu appears
and received TV channels are
automatically stored in the programme
numbers (PR).
AUTO PROGRAM
10%
TV OK
D0004-EN
CH 24
• To cancel the AUTO PROGRAM
function:
Press the b button.
After the TV channels have been
registered in the programme
numbers (PR), the EDIT menu
appears
EDIT
TV OK
D0038-EK
PR ID
AV
1
2
3
4
5
6
BBC1
BBC2
ITV
CH4
CH5
MOVE
CH/CC
CH
36
CH
21
CH
22
CH
23
CH
24
CH
25
CH
26
ID
INSERT DELETE
MANUAL
• If you want to, you can now edit the
programme numbers (PR) using the
EDIT/MANUAL function. For details,
see “EDIT/MANUAL” on page 26.
• If you do not want to edit programme
numbers (PR), go to the next step.
4 Press the aaaa button to display the
T-V LINK menu
T-V LINK
DOWNLOAD TV VCR
If you do not have a T-V LINK
compatible VCR connected:
Press the b button to exit the T-V LINK
menu.
The T-V LINK menu disappears.
If you have a T-V LINK compatible
VCR connected to the EXT-2
terminal:
Follow “Downloading the data to VCR”
on page 8 to transmit the Programme
number (PR) data.
Now, the initial settings are complete,
and you can watch the TV
• For UK model
(AV-32T4SK/AV-28T4SK/AV-28T4BK):
BBC1, BBC2, ITV, Channel 4 and
Channel 5 are automatically set to the
programme numbers PR1 to PR5. If the
TV doesn't receive one of these TV
channels, that programme number (PR)
will not be set. Programme number PR6 is
not normally set.
• For Ireland model
(AV-32T4SR/AV-28T4SR/AV-28T4BR):
If your TV can detect the TV channel
name from the TV channel broadcast
signal, the TV channel name is assigned
to the programme number (PR) to which
the TV channel has been set. However,
which TV channels are set to which
programme numbers (PR) will depend on
the area in which you live.
• If a TV channel you want to view is not
set to a programme number (PR), you can
set it using the MANUAL function. For
details, see “EDIT/MANUAL” on
page 26.
• The AUTO PROGRAM function does not
set the programme number PR 0 (AV) for
your video cassette recorder. You will
need to set this using the MANUAL
function.
TV OK
D0005-EN
EXIT
7
Setting up your TV
• In some areas you may get TV reception
from more than one transmitter, for
example different ITV regions. In this
case each TV channel could be set twice.
If this happens, the first set of channels
will have the stronger signal. If you want
to delete the second set of channels, you
will have to do it manually (see page 26).
For users in the UK:
If you have any problems setting up your
new TV, please call the
Helpline on
For users in the Republic of Ireland:
If you have any problems setting up your
new TV, please call the
Helpline on
0870 330 5000
1890-582500
.
.
Downloading the data to VCR
You can transmit to the latest Programme
numbers (PR) data to a VCR with the T-V
LINK function.
Caution
• This only works when a T-V LINK
compatible VCR is connected to the
EXT-2 terminal.
• This only works when the T-V LINK
menu is being displayed.
T-V LINK
DOWNLOAD TV VCR
TV OK
D0005-EN
1 Turn on the VCR
2 Press the aaaa button
The data transmission begins.
DOWNLOAD TV
TRANSFER. . . . .
D0037-EN
The T-V LINK menu disappears once the
data transmission ends.
EXIT
VCR
When the T-V LINK menu is
changed over to another menu:
The TV has finished its menu. This new
menu is operated from the VCR. See the
VCR instruction manual for what to do
next.
If “FEATURE NOT AVAILABLE”
appears at the T-V LINK menu:
Check the following three items. Then
press the 2222 button to retry data
transmission.
• Has a T-V LINK compatible VCR
been connected to the EXT-2
terminal?
• Has the VCR power been turned on?
• Does the SCART cable that is
connected to the EXT-2 terminal to TV LINK compatible VCR have all its
proper connections?
T-V LINK functions
When you have a T-V LINK compatible
VCR connected to the EXT-2 Terminal on
the TV, it is easier to set up the VCR and to
view videos. T-V LINK uses the following
features:
To use T-V LINK functions:
A “T-V LINK compatible VCR” means a
JVC video cassette recorder with the T-V
LINK logo, or with one of the following
logos. However, these VCRs may support
some or all of the features described earlier.
For details, see your VCR instruction
manual.
“Q-LINK” (a trademark of Panasonic
Corporation)
“Data Logic” (a trademark of Metz
Corporation)
“Easy Link” (a trademark of Phillips
Corporation)
“Megalogic” (a trademark of Grundig
Corporation)
“SMARTLINK” (a trademark of Sony
Corporation).
8
Setting up your TV
Pre-set download
The VCR will automatically download the
registered data on the TV channels from the
TV. This means you do not need to set up the
program channels on your VCR manually.
The preset download function automatically
begins when the initial setting is complete or
whenever you carry out the AUTO
PROGRAM or EDIT/MANUAL functions.
You can also carry out this function using
your VCR controls.
When “FEATURE NOT AVAILABLE” is
displayed:
If “FEATURE NOT AVAILABLE” is
displayed, the download was not performed
correctly. Before trying to download again,
check that:
• the VCR power is turned on
• the VCR is T-V LINK compatible
• the VCR is connected to the EXT-2
terminal
• the SCART cable is fully wired.
Direct Rec
“What You See Is What You Record”
You can easily record to VCR the images
that you are watching on the TV.
For details, read the manual for your VCR.
Use your VCR controls. “VCR IS
RECORDING” is displayed.
In the following situations, the VCR
will stop recording if the TV is turned
off, if the TV channel or input is
changed, or if the menu is displayed
on the TV:
• when recording images from an external
device connected to the TV (for example
a camcorder)
• when recording a TV channel after it has
been unscrambled on a decoder
• when recording a TV channel by using the
TV’s output because the VCR’s own
tuner cannot properly receive that
channel.
When the VCR is not ready (for example
when there is no tape inserted), “NO
RECORDING” is displayed.
You cannot carry out Direct Rec using your
TV’s control.
Generally, the VCR cannot record a TV
channel that it cannot receive properly on its
own tuner, even if you can view that TV
channel on the TV. However, some VCRs
can record a TV channel by using the TV’s
output if that channel can be viewed on the
TV. For details, see your VCR instruction
manual.
9
TV buttons and functions
Turn the main power on
Press the main power button on the
TV.
The power lamp lights red and your TV is in
standby mode.
To turn the main power off:
Press the main power button again.
The power lamp goes off.
Caution
• The main power button on the TV does
not fully isolate the TV from the AC
supply. If you are not going to use the TV
for a long period, be sure to disconnect
the AC plug from the AC socket.
Turn the TV on from standby
mode
Press the P pppp buttons to turn the TV
on from standby mode
E
L/MONO
P
X
T
4
R
When the TV is turned on, the power lamp
dims slightly.
E
L / MONO
P
X
T
4
R
See the pages in parentheses for details.
1 Remote control sensor
2 Power lamp (pages 6, 10)
3 Main power button (pages 6, 10)
4 Headphone jack (mini jack) (page 35)
5 P p buttons/ q buttons (page 10)
6 r (Volume) button (page 10)
7 EXT-4 terminal (pages 32, 35)
10
Choose a TV channel
Press the P pppp buttons to choose a
programme number (PR) or an EXT
terminal
Adjust the volume
1 Press the rrrr (Volume) button
The volume level indicator appears.
2 Press the qqqq buttons while the
volume level indicator is displayed
Remote control buttons and functions
1 Muting button
2 Number buttons
3 c button
4 i (hyper sound) button
5 Information button
1
2
4
5
7
8
0
AV
MENU
P
TV OK
P
.T/L
F
3
6
9
6 b button
7 5 buttons
8 # (standby) button
9 Colour buttons
0 a button
- 6 buttons
= VCR/DVD/Teletext control button
~ VCR P DVD switch g (text) button
Turn the TV on or off from
standby mode
Press the #### (standby) button to turn
the TV on or off.
When the TV is turned on, the power lamp
dims slightly.
• The power can be turned on by pressing
the b button, 6 buttons or number
buttons.
TV
11
Remote control buttons and functions
Choose a TV channel and
watch images from external
devices
• If the picture is tilted, correct it. See
“PICTURE TILT” on page 34.
Use the number buttons:
Enter the programme number (PR)
of the channel using the number
buttons.
Example:
•PR 6 → press 6
• PR 12 → press 1 and 2
buttons:
Use the
Press the
the programme number (PR) you
want or an EXT terminal.
Use the o
Press the o
an EXT terminal.
TV mode EXT modes
Programme
numbers
PR 1 – PR 99
6666
buttons to choose
6666
o button:
oo
o button to choose
oo
EXT-1
EXT-4
or or
EXT-2
or
EXT-3
• You can choose a video input signal
from the S-VIDEO signal (Y/C signal)
and regular video signal (composite
signal). For details, see “y (SVIDEO input)” on page 32.
• If you do not have a clear picture or no
colour appears, change the colour
system manually. See “COLOUR
SYSTEM” on page 21.
• If you choose an EXT terminal with no
input signal, the EXT terminal number
becomes fixed on the screen.
• This TV set has a function which can
automatically change over the input
according to a special signal output
from an external device. (The EXT-4
terminal does not support this
function.)
To return to a TV channel:
Press the b button, the 6 buttons or the
number buttons.
To use the programme number PR 0
(AV):
When the TV and VCR are connected only
by the aerial cable, choosing the programme
number PR 0 (AV) allows you to view
images from the VCR. Set the VCR RF
channel to the programme number PR 0
(AV) manually. For details, see “EDIT/
MANUAL” on page 26.
Pressing the o button changes the
choice as follows:
TV mode
Programme
numbers
PR 1 – PR 99
PR 0
EXT modes
EXT-1
EXT-4
or
EXT-2
or
EXT-3
or
• The VCR sends its playback image along
the aerial cable as an RF (radio frequency)
signal.
• Also see your VCR instruction manual.
Adjust the volume
Press the 5555 buttons to adjust the
volume.
The volume indicator appears and the
volume changes as you press the 5
buttons.
Muting the sound
Press the
turn off the sound.
Pressing the l (muting) button again
restores the previous volume level.
(muting) button to
llll
12
Loading...