JVC 0710GLT-NF-MT, GGT0361-001A-H User Manual

Safety Precautions

Care when setting

RM-C2022

LCD

DISPLAY BACK

VOL

MODE

ZOOM

ECO

TV/VIDE O

RETURN

Clear SD

KARAOKE

VOLUME

CHANNEL

VOLUME

CHANNEL

1. Select

2. Set

-%.5

OKOKOK

-%.5

466)$%/

1. Select

2. Set

Plane

1. Select a channel

(Blue)

O K

Thank you for buying this JVC LCD panel television.

To make sure you understand how to use your new TV, please read this manual thoroughly before you begin.

Follow this manual regarding setup!•

Connect only to a 110-240 V, 50/60Hz AC outlet. -

Make enough room for inserting and removing the power • plug! Place the TV as close to the outlet as possible!•

The main power supply for this TV is controlled by inserting or removing the power plug.

Never cut or damage the power cord!•

If the AC plug is not the right shape, or the power cord is not long enough, use an appropriate plug adapter or extension cable. (Consult your retailer)

Unplug the power cord when going out!•

The power buttons on the remote control and the TV unit cannot completely turn off the TV. (Make appropriate arrangements for bedridden people.)

Do not allow the TV to fall!•

Do not rest your elbows on, or allow children to hang from the TV. There is a risk that the TV will fall and cause injuries. Make use of the hole on the back of the stand to prevent the TV from falling easily.

If the TV is damaged or behaving strangely, stop • using it at once!

Unplug the power cord and contact your retailer. -

Never place anything on the TV!•

Placing liquid, naked ames, cloths, paper, etc. on the TV may cause a re.

Never expose to rain or moisture!•

To prevent re or electric shock, never allow liquids to enter the unit.

Never insert objects into the cabinet • openings!

It may cause a fatal electric shock. Take care when children are near. -

Hold the TV so as not to scratch the • screen!

Do not touch the screen when carrying the TV. -

Do not carry the TV on your own!•

In order to prevent accidents, ensure that the TV is carried by two or more people.

For more details on installation, usage and safety • ➔ Consult your retailer.

Never insert the power cord by wet hand!•

It may cause a fatal electric shock. -

Keep the TV set away from direct sunlight!•

TV set can be damaged. -

Place the TV set in a neat and dry place. Do not place the • product close to source of steam, heat, moisture or oil.

Becauseitmaycausearehazardorelectricshockhazard! Don’t touch an external metal part of the TV set!•

It may cause an electrocuted. -

For keep a distance from potential ignition • sources to the components or part in side TV set, customer should install TV set with a stand within ± 10 perpendicularly degree. Never dismantle the rear panel!•

It may cause an electric shock. -

Never obstruct the ventilation holes!•

It may cause overheating or a re. -

Handle LCD panel with care!•

Use a soft, dry cloth when cleaning. -

Never try repair the TV yourself!•

If the problem cannot be solved in “Troubleshooting” unplug the power cord and contact your retailer.

Ifatelevisionisnotpositionedinasufcientlystable• location,itcanbepotentiallyhazardousduetofalling.Many

injuries, particularly to children, can be avoided by taking simple precautions such as:

Using cabinets or stands recommended by the manufacturer of the television. Only using furniture that can safely support the television. Ensuring the television is not overhanging the edge of the supporting furniture. Not placing the television on tall furniture (for example, cupboards or bookcases) without anchoring both the furniture and the television to a suitable support. Not standing the television on cloth or other materials placed between the television and supporting furniture. Educating children about the dangers of climbing on furniture to reach the television or its controls.

Topreventaccidents,rmlyattachtheTVstandstotheTV•

shelf before using microphone. Make sure that the subwoofer is in good condition before • installing it on the TV.

If the subwoofer has leakage current, it may damage the TV or cause electric shock.

Power requirements ■

Connect the power cord • only to a 110-240V, 50/60Hz AC outlet.

Installation requirements ■

To avoid overheating, • ensure the unit has ample room.

To prevent the TV from falling thread the • belt through the hole on the back of the stand and secure it to the TV rack.

If the microphone is installed, • should be lock it’s cable follow picture.

* Please see how to set up the TV and connection in GGT0356-001A-H.

Hole for belt

Belt (not provided)

Screw (not provided)

GGT0361-001A-H 0710GLT-NF-MT

WIDE LCD PANEL TV INSTRUCTIONS

LT-32A1

ENGLISH

200 mm

50 mm150 mm 150 mm 50 mm

2 / 3 Select Main menu. (Picture / Sound / Features / Set Up)

5 / ∞ Select sub menu. 2 / 3 Change setting.

When 3 is shown. 3 Display function setting. 5 / ∞ Select function. 2 / 3 Change setting.

-%.5

466)$%/

Exit from Menu. OK Conrm after setting.

Please see “Menu operation guide” at the bottom of menu on-screen.•

JVC logo appears

If you want to edit channel, follow Edit • function in Set Up menu.

1. Select

2. Set

1. Select

Hyper Scan :

Press and hold CH. PR changes without changing the picture screen. Once you release the button, the picture of the selected PR will appear.

Return Plus : Return to the frequently viewed channel.

Return Plus Programmed by select the frequently viewed channel then press and hold

RETURN+

Return Plus Canceled by press and hold

RETURN+

Return : Return to the previously viewed channel.

Favourite channel setting.

1. Register the favourite channel

Press and hold

Programmed!

will be displayed.

Press

If the favourite channel has not been registed then “ No memory “ will • be displayed.

Press number button (1-4 only)

2. Recall the favourite channel

Move the picture with 3 or 4 while this bar is displayed.

When 720p or 1080i or 1080p signal • is received, “Full” and “Slim” can be selected. In PC mode, “Regular” and “Full” can • be selected.

Insert the batteries• Use two “AAA/R03” dry cell batteries. Insert the batteries from the · end, making sure the · and ª polarities are correct.

“AAA/R03” Batteries

WARNING:

Batteries shall not be exposed to excessive heat such as direct

sunshine, re or the like.

WARNING:

To prevent the spread of re, keep candles or other open ames away from

this product at all times.

If this symbol is shown, it is only valid in the European Union.

Remote control buttons and functions

Initial Settings (continued)

Initial Settings

Display MENU.

Show only when powering on for the rst time.•

The power on the unit can also be used.•

Area-1 : Asia, Middle East, Europe, Oceania, Africa Area-2 : South America, Philippines

1. Select

2. Set

• The select the new Country Area after Initial Setting has completed.

(While the cursor is pointing to Picture menu and hold for 3 seconds.)

If you select Country Area to “Area-1” If you select Country Area to “Area-2”

Using the TV’s Menu ---> Area - 1

If you want to set undesired channels • to be skipped, follow Channel Summary function in Set Up menu.

1. Select

2. Set

Picture

Picture Mode

Select the picture as you like. (Standard / Soft / Bright)

Backlight Darker <--> Brighter Picture Lower <--> Higher Brightness Darker <--> Brighter Detail Softer <--> Sharper Color Lighter <--> Deeper Tint Reddish <--> Greenish *Only NTSC White Balance

Select the white balance of the picture. (Cool / Mid / Warm)

Features Finer picture adjustment

Clear SD

For clearly picture (Off / Mode-1 / Mode-2)

Digital VNR Reduces the amount of noise in original

picture. (Off / On)

Color Management

For natural - looking pictures. (Off / On)

Picture Management

Fix bright / dark pictures. (Off / On)

Dynamic Backlight

Reduces the brightness of the backlight when the screen is dark. (Off / On)

Color System Select an appropriate color system.

(Auto / NTSC 3.58 / PAL-M / PAL-N)

Zoom Change the aspect ratio.

(Auto / Regular / Panoramic /14:9 Zoom / 16:9 Zoom / 16:9 Zoom Subtitle / Full)

V-Scroll

Troubleshooting

Severe noise or snow

Check the aerial cable and TV connections . Check the direction of the aerial. Check the aerial or its cable damaged or not.

Patterns, stripes or noise

Interference caused by devices such as an amplier, personal computer,

or a hair drier, Move it away from TV.

Ghosting (Doubling of images)

Interference occurs caused by signal reection from mountains or building.

Try to adjust the aerial’s direction or use another antenna.

Cannot turn it on

Ensure the power cord is connected to the AC outlet correctly.

Cannot operate the remote control.

The batteries may be exhausted. Replace with new batteries. Ensure that you are operation the remote control at less than 7 meters from the front of your TV.

Remote control stops working

Unplug TV, several minutes later plug it in again.

Side control buttons do not work

Switch “Child Lock” to “Off”.

Aspect ratio changed unintentionally

Press “

ZOOM

” button to return to your settings.

PC screen alignment is off

Adjust the “PC Position” in “PC Setting” of Set Up menu.

Blue screen appears on the screen

Switch “Blue Back” to “Off”.

Strange picture when using an external device

If the top of the image is distorted, check the video signal quality itself. If movement appears unnatural when receiving a signal from a DVD player, etc. with 625p (progressive-scanning), change the output setting of the external device to 625i (interlace-scanning).

Viewing Teletext

You can watch the Teletext broadcast channel with Text Functions.

1 TV mode <--> TEXT mode

2 Select a Teletext page by press number button (0-9).

Move up or down a page by CHANNEL +/-. •

Terminals / ConnectorsMain unit

Broadcasting systems

Area-1 B / G / I / D / K / M / N Area-2 M / N

Colour systems

Area-1 PAL / SECAM / NTSC 3.58 / NTSC 4.43 /

PAL-M / PAL-N

Area-2 NTSC 3.58 / PAL-M / PAL-N

Channels and frequencies

Area-1

VHF low channel (VL) = 46.25 to 140.25 MHz VHF high channel (VH) = 147.25 to 423.25 MHz UHF channel (U) = 431.25 to 863.25 MHz

Area-2

VHF low channel (VL) = 55.25 to 127.25 MHz VHF high channel (VH) = 133.25 to 361.25 MHz

UHF channel (U) = 367.25 to 801.25 MHz Receives cable channels in mid band (X to Z+2, S1 to S10), super band (S11 to S20) and hyper band (S21 to S41)

Sound-multiplex systems

NICAM (I / B / G / D / K ), A2 (B / G / D / K) MTS (Multi-channel Television Sound)

Teletext systems FLOF (Fastext), WST (World System Teletext) Power requirements AC 110 V - 240 V, 50/60Hz Audio output (Rated power output)

6 W + 6 W

Speakers (4 cm x 16 cm) x 2 Power consumption [standby] [“Rocket Start” mode standby]

105 W

[0.7 W]

[16 W]

Screen size (visible area size measured diagonally)

80 cm

Dimensions (W x H x D: mm) [without stand]

791.8 x 571.7 x 203.5

[791.8 x 520.5 x 103.9]

Weights [without stand]

15 kg

[12 kg]

Accessories

Power cord x 1 Remote control unit : RM-C2022 x 1 AAA/R03 dry cell battery x 2 Screw x 8

Specication

What is “Clear SD”

LCD picture is unstable due to a large number of signal noise. Such noise appears extensively especially when an LCD displays SD signals. Clear SD mode resolves disadvantage for better picture quality.

Connect a “DVI” device to “HDMI” using “DVI-HDMI” conversion cable. Connect analogue sound output of the DVI device to L and R terminals in INPUT VIDEO-2.

• Set “Audio” in “HDMI Setting” to “Analogue” or “Auto”.

Technical information

Watching Video or DVDs

Sound and Colour system in your country or region

Area Country or Region

System System

Asia, Middle East

Bahrain, Kuwait, Oman, Qatar, United Arab Emirates, Yemen, Indonesia, Malaysia, Singapore, Thailand, India, etc.

B/G

PAL China, Vietnam, etc. D/K Hong Kong, etc. I Islamic Republic of Iran, Lebanon, Saudi Arabia, etc. B/G SECAM Philippines, Taiwan, Myanmar, etc. M NTSC

Europe

Russia, etc.

D/K

SECAM Czech Republic, Poland, etc.

PALGermany, Holland, Belgium, etc. B/G UK, etc. I

Oceania

Australia, New Zealand, etc. B/G PAL

Africa

Republic of South Africa, etc. I

PAL Nigeria, etc.

B/G

Egypt, Morocco, etc. SECAM

South America

Agentina, Paraguay, Uruguay

PAL Brazil

M Chile, Peru, Bolivia, Colombia, Venezuela, Ecuador, etc.

M NTSC

1 Select the input source.

HDMI Analog / DVI Analog / PC Audio use terminal common with • VIDEO-2.

We may change the design and specications without notice.• HDMI, the HDMI Logo, and High-Denition Multimedia Interface are •

trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries.

Terminal name Terminal type Signal type (IN)

Input terminals

VIDEO-1

RCA connectors x 3

Composite video, Audio L/R

VIDEO-2

RCA connectors x 5

Composite video, Analogue component 480i (525i) / 576i (625i), Progressive : 480p (525p) / 576p (625p), HD : 720p (750p) / 1080i (1125i) / 1080p (1125p) Audio L/R

HDMI

HDMI connector x 1

HDMI 480i (525i) / 480p (525p) / 576i (625i) / 576p (625p) / 720p (750p) / 1080i (1125i) / 1080p (1125p)

PC INPUT

D-SUB (15 pins) x 1

Analogue PC signal HDMI Analog / DVI Analog / PC Audio

RCA connectors x 2

Audio L / R

Microphone

mini-jack x 1

(3.5 mm in

diameter)

Microphone input

Operate the connected device and play video.•

2 Select “Set Up” Menu.

Poor picture quality

Unnatural colour >> Adjust “Colour” and “Backlight”. Check “Colour System”. If “Auto” is selected.

Select the specic colour system manually.

Poor sound

Adjust the “Bass” and “Treble”. If receiving a poor signal in “Stereo/I■II” switch to “Mono”. Adjust the channel reception using “Manual”.

ForHDMIsignal,wrongscreensize.

Switch “Size” in “HDMI Setting” to “1” or “2”.

For HDMI signal, green and distorted screen

Wait a little for the signal to stabilize when switching the signal format for an “HDMI” device.

For HDMI signal, No picture / No sound

Use the cable marked with HDMI logo. Check if the device is compliant with HDMI. Switch “Audio” in “HDMI Setting” to “Digital” or “Auto” for HDMI devices, or “Analogue” or “Auto” for DVI devices.

Some functions do not work.

It is not a malfunction. Some functions (dark background) in the menu do not work depending on the situation.

Black or white dots appear on the screen.

LCD panels use ne dots (“pixels”) to display images. While more than

99.99% of these pixels function properly, a very small number of pixels may not light, or may light all the time. It is not a malfunction.

No picture, No sound

Some input do not output from OUTPUT terminal.

Subwoofer, No sound

May be signal source is not low frequency bass signal. Check subwoofer cable connected correctly.

Feedback sound symptoms

Keep the microphone away from the TV’s speakers.

Echo

Lower the sound level in “Microphone Volume” in order to prevent the echo.

If a problem occurs when you are using the TV, check the below troubleshooting guide before calling for repair.

Connect “DVI” devices

Using the TV’s Menu ---> Area - 2

Useful functions

Useful functions (continued)

No use “Clear SD” Use “Clear SD”

Power On / Off

Colour buttons

Turn on “Clear SD”

Turn on “Zoom”

Turn on “Eco Mode”

Turn on “Karaoke”

Favourite channel setting

Display on-screen menu

Operate the menu

To previous screen

Turn on “Sound Meister”

Volume control / Turn off muting [

For button side front will be displayed on-screen menu

When press and hold the button for 3 seconds, • on-screen menu will be displayed. To exit, press and hold the button again for • 3 seconds. ]

Function for viewing Teletext

To Teletext

Change channel / Page / Hyper Scan

(

Channel information

)

Switch between TV / Video input

Return Plus / Return function

Change channel / page

Turn the volume off / on

Zoom : Change the aspect ratio

Adjust Volume

Microphone

Favourite 1-4 ? Set 1-4 ?

Select a language.

Turn on the TV.

Select Country Area.

Select the teletext language group.

Select Air or Cable.

Automatically register channels (Auto Program).

Searching for the channels (Auto Program)

Check what was registered.

Set Up

Auto Program Automatically registers channels. Edit / Manual Move

Move a channel position by 2 and Adjust by 3 / 4.

Edit a channel name by

(Red)

Insert

Insert a channel by

(Green)

. Select a CH/CC by 3 / 4. Enter number by 0-9 buttons.

Delete

Delete a channel by

(Yellow)

Manual

(Blue)

Beginning channel search by

(Red)

and

(Green)

Channel ne tunning by

(Yellow)

and

(Blue)

If the picture or sound is unnatural by

for select a system.

Language Select your desired on screen display language. Video-2 Setting

Switch between video and component signal. (Video / Component)

Rocket Start TV can turn on quickly. (Off / On)

When Rocket Start is On, power consumption at • standby mode will more than normal standby mode.

Teletext Language

Select Teletext language group. (Group-1 / Group-2 / Group-3 / Group-4 / Group-5)

HDMI Setting Setting for HDMI input. (Size / Audio) PC Setting

Setting for PC input. (Auto / PC Position / Phase / Pixel)

Set Up

Auto Program Automatically registers channels. Channel Summary

Skip

Skip the channel by

(Red)

Cancel

Cancel the skip channel by

(Green)

Edit a channel name by

(Yellow)

Channels are to be skipped cannot be selected by • the CHANNEL - / + button. The skip can be set to all channels of Air (CH02 - • CH69) and Cable (CC01 - CC125).

Language Select your desired on screen display language. Video-2 Setting

Switch between video and component signal. (Video / Component)

Rocket Start TV can turn on quickly. (Off / On)

When Rocket Start is On, power consumption at • standby mode will more than normal standby mode.

Closed Caption

Select the desired caption or text channel.

Closed Caption

Select to view close caption or text information. (Off / CC / Text)

Caption Select the desired caption.

(CC1 / CC2 / CC3 / CC4)

Text Select the desired text channel.

(T1 / T2 / T3 / T4)

Closed Caption is not available for component • signal.

HDMI Setting Setting for HDMI input. (Size / Audio) PC Setting Setting for PC input.

(Auto / PC Position / Phase / Pixel)

Sound

MTS Select the stereo and SAP broadcasted programs.

(Stereo / SAP / Mono)

Sound Meister Set sound theme to match your listening source.

(Off / Dynamic / Pure / Living)

Bass

Compensates low frequencies to widen the frequency band. (Weaker <--> Stronger)

Treble

Compensates high frequencies to widen the frequency band. (Weaker <--> Stronger)

Surround Expands the stereo sound naturally.

(Narrower <--> Wider)

Balance Left Stronger <--> Right Stronger Voice Enhancer

Uses sound enhancement technology. (Off / On)

Al Volume

Prevent sudden increase or decrease of sound. (Off / On)

Subwoofer Out

Chooses to connect subwoofer. (Off / On)

Subwoofer Level

Adjusts sound level of your subwoofer. (Lower <--> Louder)

When Subwoofer Out set to On, you can adjust • Subwoofer Level.

Karaoke

You can enjoy to reduce the vocals for your own karaoke.

Karaoke Chooses to reduce the vocals.

(Off / Mode-1 / Mode-2)

Main Volume

Adjusts volume level. (Lower <--> Louder)

Microphone Volume

Adjusts volume level of microphone. (Lower <--> Louder)

Features

On Timer Turns on the TV from standby mode.

PR Select a channel. (01 - 99) On Timer Set a time. (00:00 - 12:00)

Sleep Timer

Turns off the TV to standby mode. (Off / 10 / 20 / ...120)

Channel Guard

Stop children from watching specic channels.

Blue Back Display a blue screen and mute the sound when the

signal is weak or absent. (Off / On)

Child Lock Disables the side control buttons of the TV. (Off / On) Auto Shutoff Set the power to turn off if no TV signal (RF) is

received and no operation is performed for about 15 minutes. (Off / On)

Favourite Setting

Delete the favourite channel that you registered by

(Blue)

Power Lamp Sets power lamp lighting while the TV is on. (Off / On) Eco Mode Adjust picture contrast to match your room brightness.

(Off / Eco-1 / Eco-2 / Max-Eco)

Features

On Timer Turns on the TV from standby mode.

CH Select a channel. (Air : CH02 - CH69 , Cable : CC01 - CC125) On Timer Set a time. (00:00 - 12:00)

Sleep Timer

Turns off the TV to standby mode. (Off / 10 / 20 / ...120)

Channel Guard

Stop children from watching specic channels.

Blue Back Display a blue screen and mute the sound when the

signal is weak or absent. (Off / On)

Child Lock Disables the side control buttons of the TV. (Off / On) Auto Shutoff Set the power to turn off if no TV signal (RF) is

received and no operation is performed for about 15 minutes. (Off / On)

Favorite Setting

Delete the favorite channel that you registered by

(Blue)

Power Lamp Sets power lamp lighting while the TV is on. (Off / On) Eco Mode Adjust picture contrast to match your room brightness.

(Off / Eco-1 / Eco-2 / Max-Eco)

654

Language group for Teletext

Group Languages

Group-1 Turkish, Hungarian, English, German, French, Italian, Spanish,

Portuguese, Greek, Swedish, Finnish

Group-2 Polish, Serbian, Croatian, Slovenian, Czech, Slovak, Rumanian,

German, French

Group-3 Russian, Bulgarian, Lettish, Lithuanian, Estonian, Ukrainian,

Serbian, Croatian, Slovenian, Czech, Slovak, English, German

Group-4 Arabic, Hungarian, English, German, French, Italian, Spanish,

Portuguese, Swedish, Finnish

Group-5 Farsi, Hungarian, English, German, French, Italian, Swedish,

Finnish

PC Signals that can be displayed

If the signal doesn’t appear, check that the vertical frequency on the PC is • set to “60Hz”.

Resolution 640 x 480 (VGA) / 1024 x 768 (XGA)

Vertical frequency 60.0

* Machintosh* computers are not supported. (Machintosh is a registered trademark of Apple Computer, Inc.)

If the characters are unreadable. • ➡ Select different Teletext language group.

List Mode : Book mark your favourite page.

MODE

for select to save Press number button for enter the number of page.

save

(Red) (Green) (Yellow) (Blue)

• Recall your favourite page by press the colour button.

Hold : Hold the current page.

• Cancel by press this button again.

Reveal : Display hidden information.

• example : answer to a quiz, etc

Size : Double the size of the displayed text.

Index : Returns to page “100” or a previously designated page.

Cancel :

Leave the current page open, while you switch to watch TV.

• Useful when running a page search.

Sub-page : Display the number of Sub-page.

• Cancel by press this button again.

HDMI setting : Setting for HDMI input.

Size : Auto / 1 / 2

If wrong screen size appears in 480p (525p), change to “1” or “2”.

Audio : Auto / Digital / Analogue

If no sound, change to “ Analogue “ or “ Digital”.

PC Setting : Setting for PC input.

Auto :

Automatic adjust by 2.

PC Position :

Adjust screen position by 3 / 4.

And set by OK.

Phase : Sets the focus of screen.

Pixel : Adjusts the horizontal feature of screen.

Picture

Picture Mode

Select the picture as you like. (Standard / Soft / Bright)

Backlight Darker <--> Brighter Contrast Lower <--> Higher Brightness Darker <--> Brighter Sharpness Softer <--> Sharper Colour Lighter <--> Deeper Tint Reddish <--> Greenish *Only NTSC White Balance

Select the white balance of the picture. (Cool / Mid / Warm)

Features Finer picture adjustment

Clear SD

For clearly picture (Off / Mode-1 / Mode-2)

Digital VNR Reduces the amount of noise in original

picture. (Off / On)

Colour Management

For natural - looking pictures. (Off / On)

Picture Management

Fix bright / dark pictures. (Off / On)

Dynamic Backlight

Reduces the brightness of the backlight when the screen is dark. (Off / On)

Colour System Select an appropriate colour system.

(Auto / PAL / SECAM / NTSC 3.58 / NTSC

4.43 / PAL-M / PAL-N)

Zoom Change the aspect ratio.

(Auto / Regular / Panoramic /14:9 Zoom / 16:9 Zoom / 16:9 Zoom Subtitle / Full)

Sound

Stereo / I■II

Select the stereo, mono or bilingual language. (I / II / O / m / Mono)

Sound Meister Set sound theme to match your listening source.

(Off / Dynamic / Pure / Living)

Bass Compensates low frequencies to widen the

frequency band. (Weaker <--> Stronger)

Treble

Compensates high frequencies to widen the frequency band. (Weaker <--> Stronger)

Surround Expands the stereo sound naturally.

(Narrower <--> Wider)

Balance Left Stronger <--> Right Stronger Voice Enhancer

Uses sound enhancement technology. (Off / On)

Al Volume

Prevent sudden increase or decrease of sound. (Off / On)

Subwoofer Out

Chooses to connect subwoofer. (Off / On)

Subwoofer Level

Adjusts sound level of your subwoofer. (Lower <--> Louder)

When Subwoofer Out set to On, you can adjust • Subwoofer Level.

Karaoke

You can enjoy to reduce the vocals for your own karaoke.

Karaoke Chooses to reduce the vocals.

(Off / Mode-1 / Mode-2)

Main Volume Adjusts volume level. (Lower <--> Louder) Microphone Volume

Adjusts volume level of microphone. (Lower <--> Louder)

Channel Guard :

Stop children from watching specic channels.

1 Select “Channel Guard”

Subwoofer out :

You can enjoy subwoofer sound from Subwoofer out.

1 Select “Subwoofer Out”

Freeze:

Take snapshots of the screen.

Karaoke :

You can enjoy to reduce the vocals for your own karaoke.

1 Select “Karaoke”

2 Select a channel and lock it ( : locked)

View a locked channel by use the numerical buttons to enter the channel • number. When appeare, press “Display” button and enter your “ID No.”

Chooses to connect subwoofer. (Off / On)

When Subwoofer Out set to On, you can adjust Subwoofer Level.•

Subwoofer to be used must have a built-in amplier.•

You cannot save or export the snapshot.• Freeze function is not available for HDMI, PC and Component signal.•

still picture

Main Volume Adjusts volume level. (Lower <---> Louder) Microphone Volume Adjusts volume level of microphone.

(Lower <---> Louder)

Microphone Volume is available when plug in microphone.• Microphone to be used with the “• Karaoke” function of JVC must be of “HIGH GRADE LOW NOISE MICROPHONE CABLE” type; otherwise, noise will result.

Lock / Release

1. Select a number

1. Select

2. To the next column

2. Adjust

3. Set

3. Finish

Cancel

Press “ OK ” again, or change the channel.

* Please see CH/CC List in GGT0356-001A-H.

Eco Mode : Adjusts picture contrast according to the brightness of your room to reduce power consumption.

Off : Deactivates the function

Eco-1 : Picture is darkened for the 1st level.

Eco-2 : Picture is darkened for the 2nd level (more than the 1st level).

Max-Eco : Only sound is available, no picture (this is to save energy in such situation as when you want to listen to the news while doing other house

works at the same time).

- After choosing Eco Mode as Max-Eco and exiting the Menu, picture will go off in 3 seconds.

- When you want the picture to appear again, press any button on the remote control then function will be reset back to “Off”.

- After unplugging the TV or press “Power off” button, this function will be reset back to “Off”

Karaoke

Chooses to reduce the vocals.

Off : Normal sound of song Mode-1 : Only sound of music Mode-2 : To sing, accompanying with sound of song

Karaoke function works only for stereo sound system.• If using Karaoke disc, users must choose to remove the • vocals from the player.

(continued)

> Language

English

Français

Українська

ไทย

Tiếng Việt

Português Melayu

Pусский

Castellano

Set Up

> Country Area

Area - 1

Area - 2

Set Up

16:9 Zoom

AV Select

0 01

1 Video-1 2 Video-2 3 HDMI 4 PC

Picture Mode

Backlight Contrast Brightness Sharpness Colour Tint White Balance Features

Soft

Warm

Picture

> Auto Program

Air

Cable

Set Up

>> Auto Program

CH 40

Set Up

> Channel Summary

CH / CC

CH 02 CH 03

CH 04

CH 05 CH 06 CH 07 CH 08 CH 09 CH 10 CH 11

Skip

Yes Yes

– – – – – – – – – – – –

B B C A B C

A B C D E F – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – –

Set Up

> Teletext Language

Group-1

Group-2 Group-3 Group-4 Group-5

Set Up

> Auto Program

CH 40

Set Up

> Set ID No.

Features

0 0 0 0

>> Channel Guard

03 04 05 06 07 08 09 10

CH / CC

CH 02

CH 05

CH 47 CH 09 CH 11 CH 07

SAT

– – – – – –

BBC IEEE APL DANY

Features

Karaoke

Main Volume Microphone Volume

Karaoke

Off

Sound

Panoramic

Zoom

Auto

Regular Panoramic 14:9 Zoom 16:9 Zoom 16:9 Zoom Subtitle Full

Picture

> Edit

01 02

04 05 06 07 08 09 10

CH / CC

CH 02 CH 03

CH 47

CH 76 CH 12 CH 09 CH 05 CH 02 CH 15 CH 28

– – – – – – – – – – – –

B B C A B C

A B C D E F – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – –

Set Up

Freeze

Sound

Stereo / I II I II Mono Sound Meister Balance Voice Enhancer

Off

AI Volume

Off

Subwoofer Out On

Subwoofer Level Karaoke