Jura Impressa Z7 ONE Touch Voice User Manual
IMPRESSA Z7 One Touch Voice
Instructions for Use
The Instructions for Use has been awarded the seal of
approval by the independent German Technical Inspection
Agency, TÜV SÜD, due to its easy-to-understand style, its
thoroughness and coverage of safety aspects.
Table of contents
Your IMPRESSA Z7 One Touch Voice
Control elements 4
Important information 6
Proper use ......................................................................................................................................................6
For your safety ...............................................................................................................................................6
1 Preparing and using for the first time 9
JURA on the Internet .....................................................................................................................................9
Your IMPRESSA speaks .................................................................................................................................9
Setting up the machine ...............................................................................................................................9
Filling the bean container ............................................................................................................................9
First-time use ................................................................................................................................................10
Activating the filter ......................................................................................................................................10
Deactivating the filter ..................................................................................................................................12
Determining the water hardness ..............................................................................................................13
Adjusting the grinder ..................................................................................................................................13
Filling the water tank ...................................................................................................................................14
2 Preparation 15
Preparation using voice recognition .........................................................................................................15
Ristretto, espresso and coffee ....................................................................................................................16
Preparing two speciality coffees at the touch of a button ...................................................................17
Special coffee ................................................................................................................................................17
Latte macchiato, cappuccino ..................................................................................................................... 17
Warm milk and milk foam ..........................................................................................................................18
Ground coffee ...............................................................................................................................................19
Permanently setting the amount of water for the cup size ................................................................20
Hot water .......................................................................................................................................................21
3 Daily operation 22
Switching on ................................................................................................................................................22
Daily maintenance ...................................................................................................................................... 22
Switching off ................................................................................................................................................ 23
4 Permanent settings in programming mode 24
Products ........................................................................................................................................................25
Setting the water hardness .......................................................................................................................28
Energy-saving mode ..................................................................................................................................28
Automatic switch-off ..................................................................................................................................29
Rinses ............................................................................................................................................................30
Rename ..........................................................................................................................................................31
Logo ...............................................................................................................................................................32
Voice recognition.........................................................................................................................................32
Voice output ................................................................................................................................................. 33
2
Table of contents
Restore factory settings .............................................................................................................................34
Viewing information and maintenance status ......................................................................................35
Unit for amount of water ...........................................................................................................................35
Language ......................................................................................................................................................36
5 Maintenance 37
Rinsing the machine ...................................................................................................................................37
Rinsing the cappuccino frother ................................................................................................................37
Cleaning the cappuccino frother ..............................................................................................................38
Dismantling and rinsing the cappuccino frother ..................................................................................39
Inserting and activating the filter .............................................................................................................39
Changing the filter ......................................................................................................................................40
Cleaning the machine ................................................................................................................................42
Descaling the machine ..............................................................................................................................43
Cleaning the bean container .....................................................................................................................45
Descaling the water tank ...........................................................................................................................46
6 Display messages 47
7 Troubleshooting 49
8 Transport and environmentally friendly disposal 51
Transport / Emptying the system ..............................................................................................................51
Disposal ..........................................................................................................................................................51
9 Technical data 52
10 Index 53
11 JURA contact details / Legal information 56
Symbol description
Warnings
JWARNING
JCAUTION
CAUTION CAUTION draws your attention to potential damage to the machine.
Symbols used
T Prompt to take action. This symbol means that you are being prompted to
E Information and tips to make it even easier to use your IMPRESSA.
ESPRESSO
Always take note of any information marked with the words CAUTION or
WARNING and a warning sign. The signal word WARNING draws your attention to
potential serious injury, and the signal word CAUTION to potential minor injury.
perform some action.
Display
3
Control elements
Control elements
1 Bean container cover
2 Water tank cover
3 Water tank
4 Power switch and mains cable (side view)
5 Height-adjustable cappuccino frother
6 Coffee grounds container
7 Drip tray
4
8 Grinder adjustment switch
9 Bean container with aroma preservation
cover
10 Filler funnel for ground coffee
11 Hot-water spout
12 Height- and width-adjustable coffee spout
13 Cup grille
Control elements
1 Q On/Off button
2 g Rotary Switch
3 c Maintenance button
4 z Milk button
5 q Latte Macchiato button
6 p Cappuccino button
7 e Special Coffee button
8 Display
9 m Hot Water button
10 u Ristretto button
11 i Espresso button
12 o Coffee button
5
Important information
Important information
Proper use
For your safety
J
The machine is designed and intended for private domestic use. It
should only be used for coffee preparation and to heat milk and
water. Use for any other purpose will be deemed improper. JURA
Elek troapparate AG cannot accept any responsibility for the consequences of improper use.
Before using the machine read these instructions for use thoroughly
and completely and comply with the instructions they contain. A
warranty service is not applicable for damage or defects caused by
non-compliance with the instructions for use. Keep these instructions for use close to the machine and pass them on to the next user.
Please carefully read and observe the important safety information
set out below.
To avoid danger of potentially fatal electric shock:
Never use a machine which is damaged or has a defective
U
mains cable.
In the event of signs of damage, for example if there is a smell
U
of burning, unplug the machine immediately from the mains
supply and contact JURA service.
If the mains cable of this machine is damaged, it must be
U
repaired either directly by JURA or by an authorised JURA service centre.
Make sure that the IMPRESSA and the mains cable are not
U
located close to hot surfaces.
Be careful to ensure that the mains cable is not trapped and
U
does not rub against sharp edges.
Never open and repair the machine yourself. Do not modify
U
the machine in any way that is not described in these instructions for use. The machine contains live parts. If opened, there
is a danger of potentially fatal injury. Repairs may only be carried out by authorised JURA service centres, using original
spare parts and accessories.
6
Important information
To completely and safely disconnect the machine from the
U
power supply, first switch off the IMPRESSA using the On/Off
button and then at the power switch. Only then should you
remove the mains plug from the power socket.
There is a risk of scalds or burns on the spouts and the cappuccino
frother.
Place the machine out of the reach of children.
U
Do not touch any hot parts. Use the handles provided.
U
Ensure that the cappuccino frother is correctly fitted and
U
clean. If incorrectly fitted or if they become blocked, the cappuccino frother or its parts might come off.
A defective machine is not safe and could cause injury or fire. To
avoid damage and any associated risk of injury or fire:
Never allow the mains cable to loosely hang down. The mains
U
cable could pose a tripping hazard or become damaged.
Protect the IMPRESSA from environmental influences such as
U
rain, frost and direct sunlight.
Do not immerse the IMPRESSA, mains cable or connections in
U
water.
Do not put the IMPRESSA or any individual parts in the dish-
U
washer.
Switch your IMPRESSA off at the power switch before any
U
cleaning operation. Always wipe the IMPRESSA with a damp
cloth rather than a wet one, and protect it from prolonged
exposure to water splash.
Only connect the machine to the mains voltage in accordance
U
with the information on the rating plate. The rating plate is
located on the underside of your IMPRESSA. Further technical
data is provided in these instructions for use (see Chapter 9
‘Technical data’).
Please only use original JURA maintenance products. Use of
U
products that are not explicitly recommended by JURA could
damage the IMPRESSA.
Do not use any coffee beans treated with additives or caramel-
U
ised coffee beans.
Only fill the water tank with fresh, cold water.
U
7
Important information
Switch the machine off at the power switch if you are going to
U
be absent for a longer period of time.
People, including children, who
do not have the physical, sensory or mental capabilities to use
U
the machine safely or
are inexperienced or lack knowledge in how to use the
U
machine safely
must be supervised by a responsible person when using it, or must
be instructed in how to use it correctly.
Safety when handling the CLARIS Blue filter cartridge:
Filter cartridges should be kept out of the reach of children.
U
Store filter cartridges in a dry place in the sealed packaging.
U
Protect cartridges from heat and direct sunlight.
U
Do not use damaged filter cartridges.
U
Do not open filter cartridges.
U
8
1 Preparing and using for the first time
1 Preparing and using for the first time
JURA on the Internet
Your IMPRESSA speaks
Setting up the machine
Filling the bean container
CAUTION
Visit us on the Internet. You can download short operating instructions for your machine from the JURA website (www.jura.com). You
will also find interesting and up-to-date information on your
IMPRESSA and on every aspect of coffee.
Is the bean container or water tank empty? Is the drip tray full? Your
IMPRESSA tells you what to do in these situations, e.g. ‘Please fill the
bean container.’ You can choose between voice output in German or
English, regardless of the set display language. In programming
mode, you can switch voice output on or off (see Chapter 4 ‘Permanent settings in programming mode – Voice output’).
When setting up your IMPRESSA, please note the following:
Place the IMPRESSA on a horizontal surface that is not sensi-
U
tive to water.
Choose a spot for your IMPRESSA which protects the machine
U
against overheating. Ensure that the ventilation slots are not
covered.
The bean container has an aroma preservation cover. This will ensure
that your coffee beans retain their aroma for longer.
Coffee beans which have been treated with additives (e.g. sugar),
ground coffee or freeze-dried coffee will damage the grinder.
T Only use untreated coffee beans to fill the bean container.
T Open the bean container cover and remove the aroma pres-
ervation cover.
T Remove any dirt or foreign objects from inside the bean
container.
T Fill the bean container with coffee beans, then close the
aroma preservation cover and the bean container cover.
9
1 Preparing and using for the first time
First-time use
J
WARNING
When using the machine for the first time, you can choose whether
you want to operate IMPRESSA with or without the CLARIS filter
cartridge Blue. If the water hardness is 10° dH or more, we recommend using the filter cartridge. If you do not know the hardness of
your water, you can find this out first (see Chapter 1 ‘Preparing and
using for the first time – Determining the water hardness’).
If the machine is operated with a defective mains cable, there is a
danger of potentially fatal electric shock.
T Never use a machine which is damaged or has a defective
mains cable.
Precondition: The bean container has been filled.
T Insert the mains plug into a power socket.
3 T Switch on the IMPRESSA using the power switch on the left-
hand side of the machine.
Q T Press the On/Off button to switch the IMPRESSA on.
The Rotary Switch lights up.
appears on the display.
g T Turn the Rotary Switch until the required language is dis-
played, for example
k T Press the Rotary Switch to confirm the language.
LANGUAGE ENGLISH.
SPRACHE DEUTSCH
CONFIRMED appears briefly on the display to confirm the
setting.
FILTER YES
Activating the filter
CAUTION
10
E Now decide whether you want to operate your IMPRESSA with
or without a CLARIS Blue filter cartridge.
Milk, sparkling mineral water or other liquids can damage the water
tank or the machine.
T Only fill the water tank with fresh, cold water.
k T Press the Rotary Switch to confirm the setting.
CONFIRMED appears briefly on the display.
INSERT FILTER / PRESS BUTTON, the Mainte-
nance button c lights up.
1 Preparing and using for the first time
T Remove the water tank and rinse it with cold water.
T Remove the filter cartridge extension from the Welcome
Pack.
T Fit the filter extension on top of a CLARIS Blue filter cartridge.
T Open the filter holder and insert the filter cartridge into the
water tank, exerting slight pressure.
T Close the filter holder. It will click into place audibly.
E After two months, the filter will cease to work. Set the date on
the date plate on the filter holder in the water tank.
T Fill the water tank with fresh, cold water and reinsert the
tank.
T Place a receptacle (at least 500 ml) under the cappuccino
frother.
c T Press the Maintenance button.
FILTER RINS., water flows out of the cappuccino
frother.
E You can interrupt rinsing of the filter at any time by pressing
any button. Press the Maintenance button c, to continue with
rinsing of the filter.
E The water may be slightly discoloured. This is not harmful to
health and does not affect the taste.
Rinsing of the filter stops automatically after approximately
500 ml.
SYSTEM FILLS, the system fills up with water. The oper-
ation stops automatically.
on the display.
WELCOME TO JURA appears
UNIT IS HEATING
PRESS RINSE, the Maintenance button c lights up.
11
1 Preparing and using for the first time
Deactivating the filter
CAUTION
T Empty the receptacle and place it under the coffee spout.
c T Press the Maintenance button.
RINSING, the machine rinses. The operation stops auto-
matically.
SELECT PRODUCT appears on the display. Your
IMPRESSA is ready for use.
Milk, sparkling mineral water or other liquids can damage the water
tank or the machine.
T Only fill the water tank with fresh, cold water.
g T Turn the Rotary Switch until
k T Press the Rotary Switch to confirm the setting.
FILTER NO is displayed.
CONFIRMED appears briefly on the display.
HARDNESS 16°dH
E If you do not know the hardness of your water, you must find
this out first (see Chapter 1 ‘Preparing and using for the first
time – Determining the water hardness’).
g T Turn the Rotary Switch to adjust the water hardness.
k T Press the Rotary Switch to confirm the setting.
CONFIRMED appears briefly on the display.
WATER TANK FILL
T Remove the water tank and rinse it with cold water.
T Fill the water tank with fresh, cold water and reinsert the
tank.
PRESS RINSE, the Maintenance button c lights up.
12
1 Preparing and using for the first time
T Place one receptacle under the hot-water spout and another
under the cappuccino frother.
c T Press the Maintenance button.
SYSTEM FILLS, the system fills up with water. The oper-
ation stops automatically.
on the display.
WELCOME TO JURA appears
UNIT IS HEATING
PRESS RINSE, the Maintenance button c lights up.
T Place a receptacle under the coffee spout.
c T Press the Maintenance button.
RINSING, the machine rinses. The operation stops auto-
matically.
SELECT PRODUCT appears on the display. Your
IMPRESSA is ready for use.
Determining the water
hardness
Adjusting the grinder
CAUTION
You can find out what the water hardness is by using the Aquadur®
test strip supplied as standard.
T Hold the test strip briefly (for 1 second) under flowing water.
Shake off the water.
T Wait for about 1 minute.
T You will then be able to read the degree of water hardness
from the discolouration of the Aquadur® test strip and the
description on the packaging.
You can adjust the grinder on a continuous scale to suit the degree
of roast of your coffee.
If you adjust the consistency of grind when the grinder is not operating, the grinder adjustment switch could be damaged.
T Only adjust the consistency of grind when the grinder is run-
ning.
The consistency of grind setting is correct if the coffee flows regularly from the coffee spout. In addition a fine, thick crema forms.
13
1 Preparing and using for the first time
Example: Proceed as follows to change the consistency of grind
during the preparation of an espresso.
T Open the cover of the bean container.
T Place a cup under the coffee spout.
i T Press the Espresso button.
The grinder starts up.
strength are displayed.
T Turn the grinder adjustment switch to the desired position
while the grinder is running.
The espresso is prepared and the consistency of grind is
adjusted.
T Close the cover of the bean container.
1 ESPRESSO and the coffee
Filling the water tank
CAUTION
To enjoy the perfect cup of coffee we recommend changing the
water every day.
Milk, sparkling mineral water or other liquids can damage the water
tank or the machine.
T Only fill the water tank with fresh, cold water.
T Open the water tank cover.
T Remove the water tank.
T Fill the water tank with fresh, cold water and reinsert the
tank.
T Close the water tank cover.
14
2 Preparation
2 Preparation
E You can stop preparation of a speciality coffee, speciality cof-
fee with milk or hot water at any time. Just press any button.
E Before and during the grinding operation you can select the
coffee strength of individual products: extra-mild (
(
öö), normal (ööö), strong (öööö) or extra-strong
(
ццццц).
E During preparation, you can change the preset amount of
water by turning the Rotary Switch.
E You can follow the current status of preparation on the
progress bar.
You can make permanent settings for all products in programming
mode (see Chapter 4 ‘Permanent settings in programming mode –
Products’).
ö), mild
Preparation using voice
recognition
You can initiate the preparation of coffee, latte macchiato and so on
simply by telling the machine what you want. Press the Rotary
Switch to activate voice recognition. As soon as the Rotary Switch
flashes blue, all you have to do is speak the name of the product and
preparation is started. In programming mode, you can switch voice
recognition on or off (see Chapter 4 ‘Permanent settings in programming mode – Voice recognition’).
E When the Rotary Switch lights up blue, voice recognition is
switched on.
You can prepare the following eight products using voice recognition:
‘Ristretto’
U
‘Espresso’
U
‘Kaffee’ (Coffee)
U
‘Spezial’ (for special coffee)
U
‘Cappuccino’
U
‘Latte macchiato’
U
‘Heisswasser’ (Hot water)
U
‘Milch’ (Milk)
U
15
2 Preparation
E Voice recognition remains activated for 1 minute. If no prepa-
ration is initiated during this time, voice recognition deacti-
vates itself automatically.
E If voice recognition is activated, you can deactivate it at any
time by pressing the Rotary Switch.
Example: Proceed as follows to prepare one espresso using voice
recognition.
Precondition:
Switch lights up blue.
T Place a cup under the coffee spout.
k T Press the Rotary Switch.
T Clearly say ‘espresso’ while
E If the IMPRESSA did not understand the product name,
COFFEE READY is displayed and the Rotary
The Rotary Switch flashes blue and
display.
VOICE appears on the
VOICE is displayed.
SORRY? appears on the display. Repeat the product name
as soon as
VOICE is displayed again.
Ristretto, espresso and
coffee
16
Preparation starts.
is displayed. The preset amount of water for espresso flows
into the cup.
Preparation stops automatically.
the display. Then
ognition is deactivated, the Rotary Switch lights up blue.
Preparation of all speciality coffees (ristretto u, espresso i and
coffee o) follows this model.
Example: Proceed as follows to prepare one coffee.
T Place a cup under the coffee spout.
o T Press the Coffee button.
Preparation starts.
displayed. The preset amount of water for coffee flows into
the cup.
Preparation stops automatically and
briefly on the display. Then
1ESPRESSO and the coffee strength
ENJOY appears briefly on
COFFEE READY is displayed. Voice rec-
1COFFEE and the coffee strength is
ENJOY appears
COFFEE READY is displayed.
2 Preparation
Preparing two speciality
coffees at the touch of a
button
Special coffee
Latte macchiato,
cappuccino
To prepare two cups of coffee: Place two cups under the coffee
spout. Press the Coffee o button twice (within two seconds), to
start coffee preparation.
Example: Proceed as follows to prepare one special coffee.
T Place a cup under the cappuccino frother.
e T Press the Special Coffee button.
Preparation starts.
displayed. The preset amount of water for coffee flows into
the cup. Preparation stops automatically and
appears briefly on the display. Then
displayed.
Your IMPRESSA can prepare a latte macchiato or cappuccino at the
touch of a button. There is no need to move the glass or cup.
Example: Proceed as follows to prepare one latte macchiato.
T Attach the milk pipe to the cappuccino frother. Use the long
pipe for a milk carton and the short pipe for the milk container.
T Insert the other end of the milk pipe into a milk carton or
connect it to a milk container.
T Place a glass under the cappuccino frother.
T Turn the setting wheel of the cappuccino frother to the Milk
Foam 5 position.
q T Press the Latte Macchiato button.
1SPECIAL and the coffee strength is
ENJOY
COFFEE READY is
E If an energy-saving mode is set, the machine heats up first.
Press the Latte Macchiato button once more as soon as
COFFEE READY is displayed again.
1LATTE MAC. and the coffee strength is displayed.
1LATTE MAC. / 1MILK, the milk foam is prepared.
Preparation stops automatically when the preset amount of
milk is reached.
1LATTE MAC.
17
Loading...