Jura IMPRESSA Z7 User Manual
IMPRESSA Z7 – Quick Reference Guide
The ‘IMPRESSA Z7 Instructions for Use’ together with these
short instructions ‘IMPRESSA Z7 – Quick Reference Guide’
has been awarded the seal of approval by the independent
German Technical Inspection Agency, TÜV SÜD, due to its
easy-to-understand style, its thoroughness and coverage
of safety aspects.
IMPRESSA Z7 – Quick Reference Guide
IMPRESSA Z7 – Quick Reference Guide
J
These short instructions do not replace the ‘IMPRESSA Z7 Instructions for Use’. Make sure you read and observe the safety information and warnings first in order to avoid hazards.
Rinsing the machine
Inserting and activating
the filter
2
You can initiate the rinse operation manually at any time.
Precondition:
T Place a receptacle under the coffee spout.
k T Press and hold the Rotar y Switch until
k T Press the Rotary Switch to enter the programme item.
COFFEE READY is displayed.
MAINTENANCE
appears.
CAPPUCCINO CLEAN
g T Turn the Rotary Switch until MACHINE RINSING is dis-
played.
k T Press the Rotary Switch to initiate the rinse operation.
RINSING
Rinsing stops automatically and COFFEE READY appears
on the display.
Your IMPRESSA no longer has to be descaled if you are using the
CLARIS Blue filter cartridge.
Perform the ‘inserting the filter’ operation without any inter-
E
ruptions. This will ensure that your IMPRESSA alwa ys produces
its best.
Precondition:
k T Press and hold the Rotar y Switch until
g T Turn the Rotary Switch until
k T Press the Rotary Switch to enter the programme item.
COFFEE READY is displayed.
MAINTENANCE
appears on the display.
FILTER is displayed.
FILTER NO
g T Turn the Rotary Switch until FILTER YES is displayed.
k T Press the Rotary Switch to confirm the setting.
CONFIRMED appears briefly on the display.
INSERT FILTER / PRESS BUTTON, the Mainte-
nance button c lights up.
IMPRESSA Z7 – Quick Reference Guide
T Remove the filter cartridge extension from the Welcome
Pack.
T Fit the filter extension on top of a CLARIS Blue filter car-
tridge.
T Remove and empty the water tank.
T Open the filter holder and insert the filter cartridge into the
water tank, exerting slight pressure.
T Close the filter holder. It will click into place audibly.
After two months, the filter will cease to work. You can check
E
the elapsed time by referring to the date plate on the filter
holder in the water tank.
T Fill the water tank with fresh, cold water and reinsert the
tank.
T Place a receptacle (at least 500 ml) under the cappuccino
frother.
c T Press the Maintenance button.
FILTER RINS.. Water flows out of the cappuccino
frother.
You can interrupt rinsing of the filter at any time by pressing
E
any button. Press the Maintenance button c to continue rinsing of the filter.
The water may be slightly discoloured. This is not harmful to
E
health and does not affect the taste.
Changing the filter
Rinsing of the filter stops automatically after approximately
500 ml.
COFFEE READY appears on the display. The filter
is activated.
E After 50 litres of water have flowed through, the filter will
cease to work. Your IMPRESSA will automatically prompt you
to change the filter.
After two months, the filter will cease to work. You can check
E
the elapsed time by referring to the date plate on the filter
holder in the water tank.
If the CLARIS Blue filter cartridge is not activated in program-
E
ming mode, you will not be prompted to change the filter.
3
Loading...