Jura IMPRESSA XS95, IMPRESSA XS90, IMPRESSA Xs9 Instruction Manual

The IMPRESSA Xs95/Xs90 One Touch and IMPRESSA Xs9 One Touch Classic Manual

Original instructions for use

Before using the machine read the instructions for use.

The ‘IMPRESSA Manual’ has been awarded the seal of approval by the independent German Technical Inspection Agency, TÜV SÜD, due to its easy-to-understand style, its thoroughness and coverage of safety aspects.

JURA Type 668

Table of contents

Your IMPRESSA Xs9 Classic

Control elements 4 Proper use For your safety

1 Preparing and using for the first time

2 Familiarising yourself with the control options

3 Preparation at the touch of a button

4 Permanent settings in programming mode

Symbol description ....................................................................................................................................... 9

Connector System

....................................................................................................................................10

Setting up ......................................................................................................................................................10

Filling the water tank ...................................................................................................................................10

Bean container filling ...................................................................................................................................10

First-time use .................................................................................................................................................11

Using and activating filter ..........................................................................................................................12

Determining and adjusting the degree of water hardness ..................................................................13

Adjusting grinder .........................................................................................................................................14

Switching on .................................................................................................................................................15

Switching off .................................................................................................................................................15

Preparation at the touch of a button ........................................................................................................16

One-off settings before and during preparation ....................................................................................17

Entering a permanent setting for the amount of water for a cup size...............................................18

Permanent settings in programming mode ...........................................................................................19

Viewing information and maintenance status .......................................................................................21

Counter ......................................................................................................................................................... 22

Espresso ........................................................................................................................................................ 23

Coffee ............................................................................................................................................................ 23

Coffee à la Carte .......................................................................................................................................... 24

Latte macchiato, cappuccino ....................................................................................................................24

Pre-ground coffee ....................................................................................................................................... 25

Hot milk and milk foam .............................................................................................................................26

Hot water ..................................................................................................................................................... 27

Products ........................................................................................................................................................ 28

Energy-saving mode ..................................................................................................................................30

Automatic switch-off ...................................................................................................................................31

Rinses .............................................................................................................................................................31

Restore factory settings ............................................................................................................................. 32

Table of contents

Lock ................................................................................................................................................................33

Unit amount of water .................................................................................................................................34

Language ...................................................................................................................................................... 34

5 Maintenance

Maintenance tips .........................................................................................................................................36

Cleaning the cappuccino frother ..............................................................................................................36

Rinsing the machine ................................................................................................................................... 37

Rinsing the cappuccino frother ................................................................................................................38

Disassembling and rinsing the Professional Cappuccino Frother ......................................................39

Disassembling and rinsing the Easy Cappuccino Frother....................................................................40

Cleaning the machine ................................................................................................................................40

Descaling the machine ...............................................................................................................................42

Changing the filter ......................................................................................................................................44

Cleaning the bean container .....................................................................................................................46

Descaling the water tank ........................................................................................................................... 47

6 Display messages 7 Troubleshooting 8 Transport and environmentally neutral disposal

Transport / Emptying the system .............................................................................................................52

Disposal .........................................................................................................................................................52

9 Technical data Index

JURA contact details / Legal information

Control elements

1 Bean container cover 2 Bean container with aroma preservation

cover 3 Water tank with handle 4 Power switch and power cable (back of

machine) 5 Coffee grounds container 6 Cup platform 7 Drip tray

8 Fineness of grind switch 9 Cup tray 10 Cover of filler funnel for pre-ground coffee 11 Filler funnel for pre-ground coffee 12 Connector System

for removable

frothers 13 Professional Cappuccino Frother 14 Height-adjustable coffee spout 15 Hot water spout

12 13

Control elements

Front left 1 Display 2 Rotary Switch cover 3 f Rotary switch

Q On/off button c Maintenance button i 1 Espresso button 4 2 Espressi button o 1 Coffee button d 2 Coffees button e Coffee à la Carte button

v Pre-ground coffee button

Front right 4 ö Selector switch 5 Professional Cappuccino Frother 6 Easy Cappuccino Frother a Hot water portion symbol

m Hot water symbol p Cappuccino button z Milk portion symbol n Milk symbol

q Latte Macchiato button

The Connector System

5 6

permits the use of different frothers. These are available from stockists.

Important information

Proper use

This machine is intended for use by specialist or trained staff in businesses, light industry and agricultural facilities or for commercial use by non-professionals. It should only be used for coffee preparation and to heat milk and water. Use for any other purpose will be deemed improper. JURA Elektroapparate AG cannot accept any responsibility for the consequences of improper use.

Before using the machine read these instructions for use thoroughly and completely and comply with the instructions they contain. A warranty service is not applicable for damage or defects caused by non-compliance with the instructions for use. Keep these instructions for use close to the machine and pass them on to the next user.

The GIGA may only be operated by instructed persons. Non-professionals must be supervised during use.

For your safety

Please read and note carefully the following important safety information. By doing this, you can avoid the life-threatening danger of electric shock:

Z Never use a machine which has been dam-

aged or with a defective power cable.

Z For information on what to do in case of dam-

age, for example if there is a smell of burning, unplug the machine immedi ately from the mains supply and contact the JURA service centre.

Z If the power cable for this machine is dam-

aged, it must be repaired either directly by JURA or by a JURA approved service centre.

Z Make sure that the IMPRESSA and the power

cable are not located close to hot surfaces.

Important information

Z Be careful to ensure that the power cable does

not get caught and does not rub against sharp edges.

Z Never open and repair the machine yourself.

Do not modify the machine in any way that is not described in the IMPRESSA Manual. The machine contains live parts. If opened, there is a danger of serious injury. Repairs may only be carried out by JURA approved service centres, using original spare parts and accessories.

There is a risk of scalds or burns on the spouts or in the nozzle:

Z Place the machine out of the reach of children. Z Do not touch any hot parts. Use the handles

provided.

Z Be careful to ensure that the appropriate noz-

zle is installed and clean. The nozzle or parts of the nozzle might come off if the parts are not assembled correctly or a blockage occurs.

A defective machine is not safe and could cause injury or fire. To avoid damage and any associated risk of injury or fire:

Z Never allow the power cable to loosely hang

down. The power cable can be tripped over or damaged.

Z Protect your IMPRESSA from environmental

influences such as rain, frost and direct sunlight.

Z Do not put the IMPRESSA, cable or connec-

tions in water.

Z Do not put the IMPRESSA or any individual

parts in the dishwasher.

Z Turn your IMPRESSA off at the power switch

before starting any cleaning operation. Always wipe your IMPRESSA with a damp cloth rather than a wet one, and protect it from prolonged water splash.

Important information

Z The IMPRESSA is not suitable for installation

on a surface where a jet of water can be used.

Z The machine must not be cleaned with a jet of

water.

Z Only connect the machine to a power supply

in accordance with the information on the rating plate. The rating plate is located on the underside of your IMPRESSA. Further technical data is given in Chapter 9 ‘Technical Data’.

Z Use only original JURA care products. Use of

accessories that are not explicitly recommended by JURA could damage the IMPRESSA.

Z Do not use any coffee beans treated with addi-

tives or caramelised coffee beans.

Z Always fill the water tank with cold, fresh mains

water.

Z If you will be absent for an extended period,

turn the machine off and unplug.

Z Children may not clean or service the machine

unless supervised by a responsible person.

Z Do not allow children to play with the machine. Z Keep children under the age of 8 away from

the machine, or supervise them constantly.

Z Children aged 8 and over may only operate

the machine without supervision if they have been instructed in how to use it safely. Children must be able to recognise and understand the potential dangers arising from incorrect use.

People, including children, who

Z do not have the physical, sensory or mental

capabilities to use the machine safely or

Z are inexperienced or lack knowledge in how to

use the machine safely must be supervised by a responsible person when using it, or must be instructed in how to use it correctly.

Symbol description

Warnings

Always take note of any information marked with the CAUTION or WARNING symbol. The signal word WARNING points out potential risk of serious injury, and the signal

CAUTION

Symbols used

word CAUTION potential risk of slight injury.

The CAUTION symbol is used to draw attention to circumstances which could cause the machine to become damaged.

Important information

Safe handling of the CLARIS filter cartridges:

Z CLARIS filter cartridges should be kept out of

the reach of children.

Z Store them dry in the sealed package. Z Protect them from heat and direct sunlight. Z Do NOT use damaged CLARIS filter cartridges. Z Do NOT open CLARIS filter cartridges.

Information and tips to make things easier for you as you use your IMPRESSA.

References to the online JURA website, where you can find interesting further information: www.jura.com.

Prompt to take action. This symbol means that you are being prompted to perform

some action.

1 Preparing and using for the first time

This chapter provides you with the information you need to use your IMPRESSA without any problems. You will prepare your IMPRESSA step-by-step for your first coffee experience.

Connector System©

Setting up

Filling the water tank

CAUTION

The Connector System frothers:

Z Professional Cappuccino Frother

U Cappuccino / latte macchiato U Hot milk

Z Easy Cappuccino Frother

U Cappuccino / latte macchiato

When setting up your IMPRESSA, please note the following:

Z Set the IMPRESSA down on a horizontal surface that is not

sensitive to water.

Z Choose a spot for your IMPRESSA which is protected against

overheating. Ensure that the ventilation slots are not covered.

To enjoy perfect coffee we recommend changing the water every day.

Milk, mineral water or other liquids can damage the water tank or the machine.

T Only fill the water tank with fresh, cold water.

T Remove the water tank and rinse it with cold water. T Fill the water tank with fresh, cold water and reinsert.

permits the use of different cappuccino

Bean container filling

CAUTION

The bean container has an aroma preservation cover. This will ensure that your coffee beans retain their aroma for longer.

Coffee beans which have been treated with additives (e.g. sugar), pre-ground or freeze-dried coffee will damage the grinder.

T Only use untreated coffee beans to refill the bean container.

T Open the cover of the bean container and remove the aroma

preservation cover.

First-time use

WARNING

1 Preparing and using for the first time

T Remove any dirt or foreign objects inside the bean con-

tainer.

T Fill the bean container with coffee beans, then close the

aroma preservation cover and the bean container cover.

If the machine is operated with a defective power cable, there is a danger of electric shock.

T Never use a machine which has a defective power cable.

Precondition: The water tank and bean container are full.

T Insert the mains plug into a power socket.

3 T Switch on the IMPRESSA using the power switch on the back

of the machine. The on/off button Q lights up (standby).

Q T Press the on/off button to switch the IMPRESSA on.

The pre-set language appears on the display.

T Open the cover of the Rotary Switch.

g T Turn the Rotary Switch until the desired language is dis-

played. For Example:

k T Press the Rotary Switch to confirm the language.

LANGUAGE ENGLISH

CONFIRMED √ appears briefly on the display to confirm

the setting.

FILL SYSTEM / PRESS RINSE, the maintenance

button c lights up.

T Place a receptacle under the hot water spout and another

under the frother.

c T Press the maintenance button.

SYSTEM FILLS, the system fills up with water and the

maintenance button flashes. A small amount of water flows from the frother and the hot water spout. This operation stops automatically. appears on the display.

WELCOME TO JURA

HEATING UP PRESS RINSE, the maintenance button c lights up.

1 Preparing and using for the first time

T Place a receptacle under the coffee spout.

c T Press the maintenance button.

The machine rinses itself, stopping automatically.

COFFEE READY appears on the display. Your IMPRESSA

is ready to use.

E If you have not been able to use the machine for the first time

correctly and fully, contact customer support in your country

(see ‘JURA contact details / Legal information’).

Using and activating filter

Your IMPRESSA no longer has to be descaled if you are using CLARIS filter cartridges.

E Perform the ‘Insert filter’ operation without interruptions. This

will ensure that your IMPRESSA always produces its best.

Precondition:

k T Keep the Rotary Switch pressed until

g T Turn the Rotary Switch until k T Press the Rotary Switch to enter the programme item.

COFFEE READY is displayed.

T Open the cover of the Rotary Switch.

MAINTENANCE

appears on the display.

FILTER NO is displayed.

FILTER NO

g T Turn the Rotary Switch until FILTER YES is displayed. k T Press the Rotary Switch to confirm the setting.

CONFIRMED w appears briefly on the display to confirm

the setting.

INSERT FILTER / PRESS RINSE, the maintenance

button c lights up.

T Remove a CLARIS filter cartridge and the filter cartridge ex-

tension from the Welcome Pack.

T Fit the extension on top of the filter cartridge. T Remove the water tank and empty it. T Lift the cartridge holder and insert the filter cartridge into

the water tank, applying slight pressure.

T Close the cartridge holder. It will click into place audibly. T Fill the water tank with fresh, cold water and reinsert.

1 Preparing and using for the first time

T Place a receptacle (at least 500 ml) under the frother.

E If you are using the Professional Cappuccino Frother, set the

selection lever of the frother to the steam position n.

c T Press the maintenance button.

FILTER RINSING, water flows out of the frother.

E You can interrupt rinsing of the filter at any time by pressing

any button.

E The water may be slightly discoloured. This is not harmful to

health and does not affect the taste.

Filter rinsing stops automatically after approx. 500 ml.

COFFEE READY appears on the display. The filter is now

activated.

Determining and adjusting the degree of water hardness

The harder the water is, the more frequently the IMPRESSA needs to be descaled. It is therefore important to adjust the water hardness.

The water hardness can be adjusted on a continuous scale between 1° dH and 30° dH. This can also be deactivated, which means that the IMPRESSA will not let you know when it has to be descaled.

E However, if you are using the CLARIS filter cartridge and have

activated it, you will not be able to adjust the water

hardness.

You can find out what the water hardness is by using the Aquadur® test strip supplied as standard.

T Hold the test strip briefly (for one second) under flowing

water. Shake off the water.

T Wait for about one minute. T You will then be able to read the degree of water hardness

from the discolouration of the Aquadur® test strip and the description on the packaging. You can now adjust the water hardness.

Example: To change the water hardness from proceed as follows: Precondition:

COFFEE READY is displayed.

T Open the cover of the Rotary Switch.

16°d H to 25°d H ,

1 Preparing and using for the first time

k T Keep the Rotary Switch pressed until MAINTENANCE

appears.

g T Turn the rotary switch until

displayed.

k T Press the Rotary Switch to enter the programme item.

HARDNESS 16°dH is

16°dH

g T Turn the Rotary Switch until 25°dH is displayed. k T Press the Rotary Switch to confirm the setting.

CONFIRMED w appears briefly on the display. HARDNESS 25°dH

g T Turn the Rotary Switch until EXIT is displayed. k T Press the Rotary Switch to exit programming mode.

COFFEE READY is shown on the display.

Adjusting grinder

CAUTION

You can adjust the grinder continuously to suit the roast of your coffee.

If you adjust the fineness of grind when the grinder is not operating, the grinding wheel could be damaged.

T Only adjust the fineness of grind when the grinder is run-

ning.

The consistency of grind setting is correct if the coffee flows regularly from the dual spout. In addition a fine, thick crema forms.

Example: To change the fineness of grind during coffee preparation, proceed as follows:

T Open the cover of the bean container. T Place a cup under the coffee spout.

o T Press the 1 Coffee button.

The grinder starts and

T Turn the fineness of grind switch to the desired position

while the grinder is running. The coffee will be prepared and the fineness of grind is adjusted.

1 COFFEE is displayed.

1 Preparing and using for the first time

Switching on

Switching off

When the IMPRESSA is switched on, a prompt for the rinse operation automatically appears which is initiated by pressing the maintenance button.

This setting can be changed in programming mode so that the machine automatically activates the switch-on rinse (see Chapter 4 ‘Permanent settings in programming mode – Rinses’).

Precondition: Your IMPRESSA is switched on at the power switch and the on/off button Q is illuminated. Q T Press the on/off button to switch the IMPRESSA on.

WELCOME TO JURA appears briefly on the display. HEATING UP PRESS RINSE, the maintenance button c lights up.

T Place a receptacle under the coffee spout.

c T Press the maintenance button.

The machine rinses itself, stopping automatically.

COFFEE READY appears on the display. Your IMPRESSA

is ready to use.

When you switch your IMPRESSA off, the spouts with which a coffee speciality or milk have been prepared are rinsed.

T Place a receptacle under the coffee spout and the frother.

Q T Press the on/off button.

MACHINE RINSING appears on the display, and the

coffee spout is rinsed.

SPOUT RIGHT / PRESS RINSE.

c T Press the maintenance button.

MACHINE RINSING, the right coffee spout is rinsed.

The IMPRESSA is switched off, and the on/off button Q lights up.

E When your IMPRESSA is switched off, a hissing noise may be

audible. This is normal and does not have any effect on the

machine.

2 Familiarising yourself with the control options

With the IMPRESSA, you can prepare an excellent coffee or milk speciality at the touch of a button. You also have the option of adjusting the coffee strength and temperature, as well as the amount of water to your personal taste.

This chapter will allow you to become familiar with all control options with the aid of examples. To familiarise yourself with your IMPRESSA, we recommend that you make a point of actively trying the facilities described in this chapter. You will find this is well worthwhile.

Learn how to perform the following:

Z Preparation at the touch of a button Z One-off settings before and while your drink is being prepared Z Adjusting the default amount of water to suit the cup size Z Permanent settings in programming mode

E You can stop the machine at any time while a coffee or milk

speciality or hot water is being prepared. To do this, press any

button.

Preparation at the touch of a button

Prepare your favourite coffee speciality at the touch of a button.

All coffee specialities are prepared following this model.

Example: This is how to prepare one coffee. Precondition:

o T Press the 1 Coffee button.

COFFEE READY is displayed.

T Place a cup under the coffee spout.

1 COFFEE and the pre-set coffee strength is displayed.

The pre-set amount of water flows into the cup. Preparation stops automatically.

COFFEE READY is then displayed.

E To prepare 2 coffees, place two cups under the coffee spout

and press the 2 Coffees button d.

ENJOY appears on the display.

2 Familiarising yourself with the control options

One-off settings before and during preparation

Changing the coffee strength before preparation

It is possible to make various settings before and during preparation. These one-off settings are always follow the same model and are not stored.

The coffee strength of Coffee à la Carte can be changed before preparation. The following coffee strength options can be selected:

ö (xmild)

öö (mild)

ööö (normal)

öööö (strong)

ццццц (xstrong)

Example: Proceed as follows to to prepare a strong cup of Coffee à la Carte. Precondition:

e T Press the Coffee à la Carte button.

COFFEE READY is displayed.

T Place a cup under the coffee spout. T Open the cover of the Rotary Switch.

A LA CARTE and the pre-set coffee strength is dis-

played.

g T Turn the Rotary Switch until

displayed.

k T Turn the Rotary Switch while

displayed.

A LA CARTE öööö is

A LA CARTE öööö, the pre-set amount of water flows

into the cup. Preparation stops automatically. appears on the display. played.

COFFEE READY is then dis-

ENJOY

Changing the amount of water during preparation

The pre-set amount of water of all coffee products can be changed during the brewing operation by turning the Rotary Switch.

Example: Proceed as follows to prepare a Precondition:

COFFEE READY is displayed.

T Place a cup under the coffee spout.

110 ML cup of coffee.

2 Familiarising yourself with the control options

o T Press the 1 Coffee button.

g T Turn the Rotary Switch during the brewing operation until

T Open the cover of the Rotary Switch.

1 COFFEE and the pre-set coffee strength is displayed.

The brewing operation starts and the coffee flows into the cup.

1 COFFEE / 110 ML is displayed.

The set amount of water flows into the cup. Preparation stops automatically.

COFFEE READY is then displayed.

ENJOY appears on the display.

Entering a permanent setting for the amount of water for a cup size

It is easy to make permanent settings for the amount of water for all coffee specialities, cappuccino, latte macchiato, a portion of hot water and portion of milk according to the cup size. As in the following example, adjust the amount of water once. Every time you prepare a drink in the future, this amount of water will be dispensed.

Making the permanent settings for the amount of water for the respective cup size always follows this model.

Example: To make permanent settings for the amount of water for an espresso, proceed as follows: Precondition:

i T Press and hold the 1 Espresso button.

COFFEE READY is displayed.

T Place an espresso cup under the coffee spout.

1 ESPRESSO and the coffee strength is displayed.

i T Hold the Espresso button down until

appears.

i T Release the 1 Espresso button.

Coffee preparation will start and the espresso will flow into the cup.

T Press any button as soon as enough espresso has flowed

into the cup. Preparation stops automatically. briefly on the display. The set amount of water for an espresso will be permanently stored. displayed.

ENOUGH COFFEE?

CONFIRMED w appears

COFFEE READY is then

E You can alter these settings at any time by repeating the

above procedure.

+ 40 hidden pages