Page 1
M
L
K
J
ABBREVIATED GUIDELINES
IMPRESSA
S70, X70
A
B
I
H
G
F
E
D
C
B
PP
NN
N
O
P
Q
R
C Coffee key for 1 normal cup
D
E Coffee key for 1 small cup
F Key for special coffee
G Rinsing key
H ON/OFF switch
I Display dialogue system (screen)
Programming panel behind door
Coffee key for 2 normal cups
Coffee key for 2 small cups
J Water tank
A
S
K Cover for bean container
L Cover for pre-ground coffee filler funnel
M Cup warming tray
N Selector key for steam
O Selector key for hot water
T
P Selector switch for coffee or hot water/steam
Q Pivoting nozzle
R Frothing nozzle
S Height-adjustable coffee spout
U
T Container for coffee grounds
U Drip tray cover (grid)
V Drip tray
V
W
W Contacts
Page 2
ABBREVIATED GUIDELINES - CLEANING
IMPRESSA
S70, X70
You know your machine needs
cleaning when below signals
appear.
CLEAN
UNIT
COFFEE
READY
You can still draw off coffee or
steam/hot water and start the
cleaning programme later.
CLEAN
NOW
An acoustic signal indicates
the need of an immediate
cleaning.
The programme lasts
approx. 15 minutes.
2
Open door (A) and press
this key until you hear an
acoustic signal to start
the cleaning programme.
NN
PP
4
Fill the water tank (J) with
tap water and reinstall it in
the machine.
6
Press this key again.
PP
NN
9
Lasts approx. 2 min.
10
PLEASE
WAIT
RINSE
UNIT
5
H g@I
ADD
TABLET
PRESS
CLEAN
7
UNIT
CLEANING
COFFEE
READY
Lasts approx. 13
11
min.
Do not interrupt programme once started.
Switch on machine (H).
1
H h@I
3
Empty the tray (V) . Put it
back after 10 sec.
EMPTY
TRAY
Put a JURA cleaning tablet
in the filler funnel for powder
coffee (L).
Use J UR A cleaning
tablets only, which are
available at your local
authorized dealer.
8
Empty the tray (V) . Put it
back after 10 sec.
EMPTY
TRAY
The cleaning programme is
now complete.
You can clean the filler funnel
for preground coffee (L) using
a flat brush.
Page 3
ABBREVIATED GUIDELINES - DE-SCALING WATER SECTOR
IMPRESSA
(De-scaling only required if you do not use JURA Claris filter)
You know your machine needs
de-scaling when below signals
appear.
UNIT
CAL. FIED
WATER
SECTOR
You can still draw off coffee or
steam/hot water and start the
de-scaling programme later.
This message only appears,
if the unit is read to draw
off water or steam. is ready
S70, X70
2
3
Only after machine has
cooled down, remove
the water tank (J) from
the machine and empty
it.
Open door (A) and
press this key until you
hear an accoustic
signal.
NN
PP
6
6
Use JURA de-scaling
tablets only, which are
available at your local
authorized dealer.
AGENT
IN TANK
CHOOSE
SECTOR
PRESS
CALC
Place any jug under the
Pivoting nozzle (Q).
9
Fill the water tank (J) with
tap water and reinstall it in
the machine.
10
Lasts approx.
WATER
SECTOR
40 min.
UNIT IS
DECALC.
FILL
WATER
PRESS
CALC
11
H@p@I
12
CLOSE
TAP
RINSE
UNIT
H@g@I
The programme lasts
approx. 45 minutes.
D o n ot i nt e r r u pt
programme once started.
1
Switch off machine (H).
H@h@I
Allow the machine to cool down
for .5 hours
EMPTY
4
Empty the tray (V) . Put it
back in after 10 sec.
5
Completely dissolve the
contentsof one blister (2
tablets) in 0,6 litres of water
in a vessel and pour the
mixture into the water tank
(J). Reinstall the tank. Make
sure it engages properly.
@
TRAY
AGENT
IN TANK
@
@
7
NN
H@p@I
PP
8
NN
PP
Lasts approx.
WATER
SECTOR
3 min.
UNIT IS
DECALC.
13
The de-scaling programme
for the water sector
is now complete.
UNIT
RINSING
COFFEE
READY
Page 4
ABBREVIATED GUIDELINES - DE-SCALING COFFEE SECTOR
IMPRESSA
(De-scaling only required if you do not use JURA Claris filter)
You know your machine needs
de-scaling when below signals
appear.
UNIT
CAL. FIED
COFFEE
SECTOR
You can still draw off coffee or
steam/hot water and start the
de-scaling programme later.
The programme lasts
approx. 40 minutes.
D o n ot i nt e r r u pt
programme once started.
1
Switch off machine (H).
2
3
4
Only after machine has
cooled down, remove
the water tank (J) from
the machine and empty
it.
Open door (A) and
press this key until you
hear an accoustic
signal.
NN
PP
EMPTY
TRAY
Empty the tray (V) . Put it
back in after 10 sec.
S70, X70
Use JURA de-scaling
tablets only, which are
available at your local
authorized dealer.
COFFEE
SECTOR
UNIT IS
DECALC.
Lasts approx.
35 min.
6
AGENT
IN TANK
CHOOSE
SECTOR
PRESS
CALC
9
Empty the tray (V) . Put it
back in after 10 sec.
10
7
H@p@I
Fill the water tank (J) with
tap water and reinstall it in
the machine.
11
EMPTY
TRAY
FILL
WATER
PRESS
CALC
12
Slide tray (V) out, empty it,
clean the contacts (W) at the
back.
Replace tray.
13
H@g@I
COFFEE
SECTOR
UNIT IS
DECALC.
Lasts approx.
EMPTY
TRAY
CLEAN
CONTACT
RINSE
UNIT
3 min.
H@h@I
Allow the machine to cool down
for .5 hours
5
Completely dissolve the
contentsof one blister (2
tablets) in 0,6 litres of water
in a vessel and pour the
mixture into the water tank
(J). Reinstall the tank. Make
sure it engages properly.
@
AGENT
IN TANK
@
@
8
UNIT
RINSING
COFFEE
READY
PP
NN
PP
NN
14
The de-scaling programme
for the coffee sector
is now complete.
Page 5
ABBREVIATED GUIDELINES - REPLACE CLARIS FILTER
IMPRESSA
S70, X70
You know your Claris filter
needs replacing when the
below signals appear.
REPLACE
FILTER
COFFEE
READY
The filter cartridge loses
its aeffect fter drawing off
50 litres.
If you draw off less than 50 litres the
cartridge should be replaced after
two months . There will be no special
message displayed, but you will find
a special disc for setting the date on
which the filter cartridge should be
replaced.
Push the unlocking lever
2
inwards and fold up the
cartridge holder.
Pull out the old filter
cartridge.
Install the new cartridge
carefully.
Properly adjust the
cartridge, otherwise the
cartridge holder will not
engage.
3
Refill the water tank (J)
with tap water and reinstall it in the machine .
5
Open door (A) and press
this key until you hear an
acoustic signal.
PP
6
Place any jug (min. 0,5 l)
7
under the pi vot i ng
nozzle (Q).
RINSE
FILTER
OPEN
NN
TAP
9
H@p@I
The system gives off
steam.
10
CLOSE
TAP
COFFEE
READY
Remove the water tank (J)
1
from the machine and pour
out the water.
4
Switch on machine (H).
H@h@I
8
The colour of the water
may have changed slightly.
This in no way affects the
taste.
H@p@I
Note: If display shows "UNIT
CALCED" in spite of using a
C l a r i s f i l t e r , c h a n g e
programming from " FI LTE R
NO" to "FILTER YES". (See
Programming F ilter in your
Instructions for Use).
Loading...