Jura D6 Instructions
E
K
D6 Instructions for Use
For your safety: read and understand manual before use.
Figure: Your machine may look
different to the one shown.
Table of contents
Your D6
IMPORTANT SAFEGUARDS 4
Control elements 8
1 Preparing and using for the first time 10
JURA on the Internet ....................................................................................................................................10
Setting up the machine ..............................................................................................................................10
Filling the bean container ...........................................................................................................................10
Determining the water hardness ...............................................................................................................11
First-time use .................................................................................................................................................11
Connecting milk ........................................................................................................................................... 13
Connect accessory (with wireless connection) ....................................................................................... 14
2 Preparation 15
Espresso and coffee .....................................................................................................................................16
Two specialty coffees at the touch of a button .......................................................................................16
Cappuccino....................................................................................................................................................16
Milk foam ....................................................................................................................................................... 17
Permanently setting the amount of water for the cup size .................................................................18
Adjusting the grinder ..................................................................................................................................19
Hot water .......................................................................................................................................................19
3 Daily operation 20
Filling the water tank ..................................................................................................................................20
Switching on ................................................................................................................................................20
Daily maintenance ......................................................................................................................................20
Regular maintenance ..................................................................................................................................21
Switching off the machine ..........................................................................................................................21
4 Permanent settings in programming mode 23
Product settings .......................................................................................................................................... 24
Setting the water hardness .......................................................................................................................25
Automatic switch-off ..................................................................................................................................26
Unit for amount of water ...........................................................................................................................26
Language ...................................................................................................................................................... 27
5 Maintenance 28
Rinsing the fine foam frother ....................................................................................................................28
Cleaning the fine foam frother .................................................................................................................29
Dismantling and rinsing the fine foam frother......................................................................................30
Inserting/changing the filter .......................................................................................................................31
Cleaning the machine ................................................................................................................................ 32
Descaling the machine ..............................................................................................................................33
Cleaning the bean container ..................................................................................................................... 35
Descaling the water tank ........................................................................................................................... 35
2
Table of contents
6 Display messages 36
7 Troubleshooting 37
8 Transport and environmentally friendly disposal 38
Transport/ Emptying the system .............................................................................................................38
Disposal .........................................................................................................................................................38
9 Technical data 39
10 Index 40
11 JURA contact details/ Legal information 44
Symbol description
Warnings
This is the safety alert symbol. lt is used to alert you to potential personal injury
J
J DANGER
J WARNING
J CAUTION
NOTICE NOTICE is used to address practices not related to personal injury.
hazards. Obey all safety messages that follow this symbol to avoid possible injury
or death.
DANGER indicates a hazardous situation which, if not avoided, will result in death
or serious injury.
WARNING indicates a hazardous situation which, if not avoided, could result in
death or serious injury.
CAUTION, used with the safety alert symbol, indicates a hazardous situation
which, if not avoided, could result in minor or moderate injury.
Symbols used
T
E
COFFEE
Prompt to take action. This symbol means that you are being prompted to
perform some action.
Information and tips to make it even easier to use your D6.
Display message
3
IMPORTANT SAFEGUARDS
IMPORTANT SAFEGUARDS
Follow the basic safety
precautions
When using electrical appliances, basic safety precautions shall
always be followed, to reduce the risk of fire, electric shock, and/or
injury to persons, including the following:
Z Read all instructions.
Z Do not touch hot surfaces. Use handles or knobs.
Z To protect against fire, electric shock and injury to persons, do
not immerse power cord, plugs, or body of machine in water
or other liquid.
Z Close supervision is necessary when any appliance is used by
or near children.
Z Unplug from outlet when not in use and before cleaning.
Allow to cool before putting on or taking off parts, and before
cleaning the appliance.
Z Do not operate any appliance with a damaged cord or plug or
after the appliance malfunctions, or has been damaged in any
manner. Return appliance to the nearest authorized service
facility for examination, repair or adjustment.
Z The use of an accessory attachment not recommended by the
appliance manufacturer may result in fire, electric shock, or
injury to persons.
Z Do not use outdoors.
Z Do not let the cord hang over the edge of a table or counter,
or touch hot surfaces.
Z Do not place on or near a hot gas or electric burner, or in a
heated oven.
Z To disconnect, turn any control to ‘OFF’ then remove plug
from wall outlet.
Z Do not use appliance for other than intended use.
Z Use extreme caution when dispensing hot steam, hot water
or hot coffee.
SAVE THESE INSTRUCTIONS.
Pass them on to any subsequent user.
4
IMPORTANT SAFEGUARDS
Intended use
Special power cord set
instructions
The appliance is designed and intended for household use only. It
shall only be used for coffee preparation and to heat milk and water,
according to these instructions. Use for any other purpose will be
deemed improper. JURA Elektroapparate AG cannot accept any
responsibility for the consequences of improper use.
People, including children, who
Z do not have the physical, sensory or mental capabilities to use
the appliance safely or
Z are inexperienced or lack knowledge in how to use the
appliance safely
must be supervised by a responsible person when using it, or must
be instructed in how to use it correctly.
Z A short power-supply cord is to be provided to reduce risks
resulting from becoming entangled in or tripping over a
longer cord.
Z The cord shall be arranged so that it will not drape over the
counter top or table top where it can be pulled on by children
or tripped over.
Z This appliance has a 3-pin grounded plug.
Z Do not modify the plug in any way.
Extension cords are available an may be used if care is exercised in
their use.
If the user chooses to use an extension cord,
Z the marked electrical rating of the extension cord should be
at least as great as the electrical rating of the appliance, and
Z if the appliance is of the grounded type, the extension cord
should be a grounding type 3-wire cord, and
Z the longer cord should be arranged so that it will not drape
over the counter top or tabletop where it can be pulled on by
children or tripped over.
J WARNING
To reduce the risk of fire or electric shock, DO NOT remove any
service covers. DO NOT modify the appliance in any way that is not
described in these instructions. NO user serviceable parts included.
Repair MUST be done by authorized personnel only.
In the event of signs of damage, for example if there is a smell of
burning, unplug the machine immediately from outlet and contact
JURA customer service.
5
IMPORTANT SAFEGUARDS
J CAUTION
NOTICE
This appliance is for household use. Any servicing other than
cleaning and user maintenance shall be performed by an authorized
service representative:
Z Do not immerse base in water or try to disassemble.
Z Do not put the appliance or any individual parts in the
dishwasher.
Z Check voltage to be sure that the voltage indicated on the
name plate complies with your voltage. The name plate is
located on the underside of the appliance.
Z Never use warm or hot water to fill the water container. Use
cold water only.
Z Keep your hands and the cord away from hot parts of the
appliance during operation.
There is a risk of scalds or burns on the spouts and the cappuccino
frother / nozzle.
Z Keep children away.
Z Do not touch any hot parts. Use the handles or knobs
provided.
Z Ensure that the cappuccino frother / nozzle is correctly fitted
and clean. If incorrectly fitted or if they become blocked, the
cappuccino frother or its parts might come off.
Z Never clean with scouring powders or hard implements.
Z Ensure that the ventilation slots are not covered.
Z Never pull out the drip tray during the brewing process. Only
pull the drip tray when the display instructs you or when the
appliance is ready for use.
6
IMPORTANT SAFEGUARDS
NEVER DO
(or you will void your
warranty protection):
Z Never fill instant coffee, chocolate mix etc. into the bean
container or ground coffee funnel (filler funnel for ground
coffee). It will damage the functioning of the brewing
chamber.
Z Never fill sugar coated coffee beans into the bean container.
In case of doubt, call your dealer.
Z Never fill anything other than coffee beans into the bean
container (no chocolate, no rice, no nuts, no spices, nothing
other than roasted coffee beans).
Z Never fill frozen beans into the bean container. If you store
beans in the freezer, let them thaw 3 to 4 hours before filling
them into the bean container.
Z Never fill anything but fresh, cold and clean water into the
water tank, except when decalcifying.
Z Never use mineral or carbonated water. You can use tap water,
bottled water, spring water and reverse osmosis water.
Z Never do anything with the machine which is not described in
these instructions. In case of doubt, call your dealer.
7
Control elements
Control elements
9
1
2
3
4
5
J HOT
6
7
8
1 On/Off button Q
2 Water tank cover
3 Water tank
4 Power cord (back of the machine)
5 Height-adjustable coffee spout
6 Coffee grounds container
7 Drip tray
8 Cup platform
J HOT
Figure: Your machine may look
different to the one shown.
9 Cover of filler funnel for cleaning tablet
10 Filler funnel for cleaning tablet
11 Bean container cover
12 Grinder adjustment switch
13 Bean container with aroma preservation
cover
14 Switch for hot water and milk foam
preparation
15 Fine foam frother
10
11
12
13
14
15
8
Control elements
1
2
1 Display
2 Rotary Switch
n nn n n n n n
cO n
3
4 5
3 O P symbol (programming)
4 c Maintenance symbol
5 n Milk foam symbol
Service socket for optional JURA Smart Connect (under cover)
9
1 Preparing and using for the first time
1 Preparing and using for the first time
JURA on the Internet
Setting up the machine
Filling the bean container
NOTICE
Visit us on the Internet (www.jura.com). You will find interesting and
up-to-date information on your D6 and on every aspect of coffee.
If you need assistance with using your machine, you can find this at
www.jura.com/service.
When setting up your D6, please note the following:
Place the D6 on a horizontal surface that is not sensitive to
U
wate r.
Choose a spot for your D6 which protects the machine against
U
overheating. Ensure that the ventilation slots are not covered.
The bean container has an aroma preservation cover. This will ensure
that your coffee beans retain their aroma for longer.
Coffee beans which have been treated with additives (e.g. sugar),
ground coffee or freeze-dried coffee will damage the grinder.
T Only use roasted, untreated coffee beans to fill the bean
container.
10
T Open the bean container cover and remove the aroma
preservation cover.
T Remove any dirt or foreign objects from inside the bean
container.
T Fill the bean container with coffee beans, then close the
aroma preservation cover and the bean container cover.
1 Preparing and using for the first time
Determining the water
hardness
Level Display German
Degree (°dH)
Not active – – – –
Very soft water <3 <3 < 53.4 None
Soft water > 4 > 4 > 71 1
Hard water > 8.4 > 8.4 > 150 2
Very hard water > 14 > 14 > 250 3
When you use the machine for the first time, you must set the water
hardness. If you do not know the hardness of your water, you can
find this out first. Use the Aquadur® test strips supplied with the
machine.
T Hold the test strip briefly (for 1second) under flowing water.
Shake off the water.
T Wait for about 1minute.
T You will then be able to read the degree of water hardness
from the discoloration of the Aquadur® test strip and the
description on the packaging.
Degrees of general
hardness (°dGH)
Parts per
million (ppm)
Indicator Strip number
of ‘reddish’ fields
First-time use
J WARNING
NOTICE
If the machine is operated with a defective power cord, there is a
danger of potentially fatal electric shock.
T Never use a machine which is damaged.
T Never use a machine which has a defective power cord.
Milk, sparkling mineral water or other liquids can damage the water
tank or the machine.
T Only fill the water tank with fresh, cold water.
E The water volume is given as standard in ‘oz’. You can change
this setting to ‘ml’ in programming mode (see Chapter 4
‘Permanent settings in programming mode – Unit for amount
of water’).
11
1 Preparing and using for the first time
n nn n nn n n
cO n
Precondition:The bean container has been filled.
T Insert the power plug into a power socket.
T Press the On/Off button Q to switch the D6 on.
LANGUAGE EN appears on the display.
T Press the Rotary Switch to confirm the setting.
OK appears briefly on the display.
HARDNESS, 16°dH
E If you do not know the hardness of your water, you can find
this out first (see Chapter 1 ‘Preparing and using for the first
time – Determining the water hardness’).
T Turn the Rotary Switch to change the water hardness
setting, e.g. to
T Press the Rotary Switch.
25°dH.
OK appears briefly on the display.
INSERT FILTER
T Open the water tank cover.
T Remove the water tank and rinse it with cold water.
T Open the filter holder.
T Insert the CLEARYL Smart filter cartridge into the water tank,
exerting slight pressure.
T Close the filter holder. It will click into place audibly.
T Fill the water tank with fresh, cold water and reinsert the
tank.
12
E The machine automatically detects that you have just inserted
the filter cartridge.
OK appears briefly on the display.
OPEN SWITCH, the light segment on the switch lights up.
T Place a receptacle (at least 17 oz or 500 ml) under the fine
foam frother and the coffee spout.
T Turn the switch to them position.
FILTER RINSING, water flows out of the fine foam
frother.
E You can interrupt rinsing of the filter at any time. To do this,
turn the switch clockwise. Turn the switch anticlockwise to
continue rinsing the filter.
1 Preparing and using for the first time
E The water may be slightly discolored. This is not harmful to
health and does not affect the taste.
Rinsing of the filter stops automatically.
CLOSE SWITCH
T Turn the switch to the °position.
SYSTEM FILLING, the system fills up with water.
EMPTY TRAY
T Empty the drip tray and coffee grounds container and put
them back into the machine.
T Place a receptacle under the coffee spout.
HEATING
RINSING, the system is rinsed. Water flows out of the
coffee spout. The rinse stops automatically.
appears on the display. Your D6 is ready for use.
CAPPUCC.
Connecting milk
Your D6 creates fine, creamy, feather-light milk foam with a perfect
consistency. The most important requirement for frothing milk is
a milk temperature of 39–46 °F (4–8 °C). We would therefore
recommend using a milk cooler or a milk container.
T Remove the protective cover from the fine foam frother.
T Connect the milk pipe to the fine foam frother.
T Connect the other end of the milk pipe to a milk container
or a milk cooler.
13
1 Preparing and using for the first time
Connect accessory (with
wireless connection)
You have the option of connecting your D6 wirelessly to a
compatible accessory. To do this, the JURA Smart Connect must
be plugged into the service socket.
E The Smart Connect can be protected against unauthorized
access using a PIN. Activate the PIN function via the JURA
app. You will find more information at
www.jura.com/smartconnect.
E Please note that you can only connect either the Cool Control
or only one JURA app to the coffee machine via Smart
Connect.
T Position the accessory near the coffee machine (a maximum
of 0.5 m away).
T Switch on the accessory and the coffee machine.
T Press the reset button of the Smart Connect (e.g. with a
paper clip).
T Then (within 30 sec.) press and hold the reset key of the
accessory until the LED lights up to indicate the successful
connection.
14
Loading...