JURA 15357 User Manual

GIGA 6 Instructions for Use

Table of contents

Your GIGA 6

Control elements 4
Important information 6

Proper use ......................................................................................................................................................6

For your safety ...............................................................................................................................................6

1 Preparing and using for the first time 10

JURA on the Internet ....................................................................................................................................10

Operation with touchscreen display and Rotary Switch .......................................................................10

Setting up the machine ...............................................................................................................................11

Filling the bean container ............................................................................................................................11

Determining the water hardness ...............................................................................................................11

First-time use ................................................................................................................................................12

Connecting milk ...........................................................................................................................................14

Connect accessory (with wireless connection) .......................................................................................14

2 Preparation 16

Ways of preparing a beverage ...................................................................................................................16

Preparing speciality coffees ........................................................................................................................17

Preparing two speciality coffees ................................................................................................................17

Preparing speciality coffees with milk ......................................................................................................18

Caffè Barista and lungo Barista .................................................................................................................18

Ground coffee ...............................................................................................................................................19

Hot water ......................................................................................................................................................20

3 Daily operation 21

Filling the water tank ...................................................................................................................................21

Switching on the machine ..........................................................................................................................21

Daily maintenance ......................................................................................................................................22

Regular maintenance .................................................................................................................................22

Switching off the machine .........................................................................................................................23

4 Permanent settings in programming mode 24

Product settings ..........................................................................................................................................25

Setting the consistency of grind ..............................................................................................................27

Automatic switch-off .................................................................................................................................. 27

Time and date ..............................................................................................................................................28

Setting the water hardness .......................................................................................................................28

Timer .............................................................................................................................................................29

Unit for amount of water/ time format ..................................................................................................30

Energy-saving mode ..................................................................................................................................30

Language .......................................................................................................................................................31

Display brightness ........................................................................................................................................31

Restore factory settings .............................................................................................................................32

2

Table of contents

Smart mode ................................................................................................................................................. 32

Displaying product names ........................................................................................................................33

Query counter readings and version ....................................................................................................... 33

5 Maintenance 35

Rinsing the machine ...................................................................................................................................35

Automatic milk system rinsing .................................................................................................................36

Cleaning the milk system ..........................................................................................................................36

Dismantling and rinsing the dual spout ................................................................................................. 37

Inserting/changing the filter ......................................................................................................................39

Cleaning the machine ................................................................................................................................40

Descaling the machine ...............................................................................................................................41

Cleaning the bean container .....................................................................................................................43

Descaling the water tank ...........................................................................................................................44

6 Display messages 45
7 Troubleshooting 47
8 Transport and environmentally friendly disposal 49

Transport/ Emptying the system .............................................................................................................49

Disposal .........................................................................................................................................................49

9 Technical data 50
10 Index 51
11 JURA contact details/ Legal information 56

Symbol description

Warnings

J WARNING

J CAUTION

CAUTION CAUTION draws your attention to potential damage to the machine.

Symbols used

T

E

‘Espresso’ Display

Always take note of any information marked with the words CAUTION
or WARNING and a warning sign. The signal word WARNING draws your
attention to potential serious injury, and the signal word CAUTION to
potential minor injury.

Prompt to take action. This symbol means that you are being prompted to
perform some action.

Information and tips to make it even easier to use your GIGA.

3

Control elements

Control elements

1

2

3

4

5

6

7

1 Bean container with aroma

preservation cover
2 Water tank cover
3 Water tank
4 Power switch and plug-in mains cable

(back of the machine)
5 Coffee grounds container
6 Drip tray
7 Cup grille

8

9

10

11

12
13

14

15

8 Filler funnel for ground coffee
9 Ventilation slats (Venti Ports)
10 Storage compartment cover
11 Measuring spoon for ground coffee
12 Height- and width-adjustable dual spout
13 Height-adjustable hot-water spout
14 Drip tray cover (pivoting)
15 Insert for drip tray

4

Control elements

1

1 Rotary Switch

1

2

3

Back of the machine

1 Service cover (open by pressing

with your finger)
2 Locking device

2

3

2 On/Off button Q (under cover)
3 Touchscreen display

4

3 Sliding catch
4 Service socket with JURA Smart Connect

Accessories

6

Container for milk system cleaning

5

Important information

Important information

Proper use

For your safety

J

The machine is designed and intended for private
domestic use. It should only be used for coffee
preparation and to heat milk and water. Use for any
other purpose will be deemed improper. JURA
Elektroapparate AG cannot accept any responsibil­ity for the consequences of improper use.

Before using the machine read these instructions
for use thoroughly and completely and comply
with the instructions they contain. A warranty ser­vice is not applicable for damage or defects caused
by non-compliance with the instructions for use.
Keep these instructions for use close to the machine
and pass them on to the next user.

Please carefully read and observe the important
safety information set out below.

To avoid danger of potentially fatal electric shock:

Never use a machine which is damaged or has

U

a defective mains cable.
In the event of signs of damage, for example if

U

there is a smell of burning, unplug the machine
immediately from the power supply and con­tact JURA service.
If the mains cable of this machine is damaged

U

it must be replaced with a special mains cable,
which is available directly from JURA or from
authorised JURA service centres.
Make sure that the GIGA and the mains cable

U

are not located close to hot surfaces.
Be careful to ensure that the mains cable is not

U

trapped and does not rub against sharp edges.

6

Important information

Never open and repair the machine yourself.

U

Do not modify the machine in any way that is
not described in these instructions for use. The
machine contains live parts. If opened, there is
a danger of potentially fatal injury. Repairs
may only be carried out by authorised JURA
service centres, using original spare parts and
accessories.
To completely and safely disconnect the

U

machine from the power supply, first switch
off the GIGA using the On/Off button Q and
then at the power switch. Only then should
you remove the mains plug from the power
socket.

There is a risk of scalds or burns on the spouts.

Place the machine out of the reach of children.

U

Do not touch any hot parts. Use the handles

U

provided.
Be careful to ensure that the dual spout is cor-

U

rectly installed and clean. If it is incorrectly fit­ted or becomes blocked, its parts might come
off. There is a danger of parts being swallowed.

A defective machine is not safe and could cause
injury or fire. To avoid damage and any associated
risk of injury or fire:

Never allow the mains cable to loosely hang

U

down. The mains cable could pose a tripping
hazard or become damaged.
Protect the GIGA from environmental influ-

U

ences such as rain, frost and direct sunlight.
Do not immerse the GIGA, mains cable or con-

U

nections in water.

7

Important information

Do not put the GIGA or any individual parts in

U

the dishwasher.
On models with glass cup grille: Do not sub-

U

ject the glass cup grille to shock or impact.
Before cleaning, switch the GIGA off with the

U

On/Off button Q. Always wipe the GIGA with a
damp cloth rather than a wet one, and protect
it from prolonged exposure to water splash.
Only connect the machine to the mains volt-

U

age in accordance with the information on the
rating plate. The rating plate is located on the
underside of your GIGA. Further technical data
is provided in these instructions for use (see
Chapter 9 ‘Technical data’).
Connect the GIGA directly to a domestic power

U

socket. Using multi-socket adapters or exten­sion cords may cause overheating.
Please only use original JURA maintenance

U

products. Use of products that are not explic­itly recommended by JURA could damage the
machine.
Do not use alkaline cleaning agents; only use

U

a soft cloth and mild cleaning agents.
Do not use any coffee beans treated with addi-

U

tives or caramelised coffee beans.
Only fill the water tank with fresh, cold water.

U

Switch the machine off at the power switch if

U

you are going to be absent for a longer period
of time and remove the mains plug from the
power socket.
Children may not clean or service the machine

U

unless supervised by a responsible person.
Do not allow children to play with the machine.

U

8

Important information

Keep children under the age of 8 away from

U

the machine, or supervise them constantly.
Children aged 8 and over may only operate

U

the machine without supervision if they have
been instructed in how to use it safely. Chil­dren must be able to recognise and under­stand the potential dangers arising from incor­rect use.

People, including children, who

do not have the physical, sensory or mental

U

capabilities to use the machine safely or
are inexperienced or lack knowledge in how to

U

use the machine safely
must be supervised by a responsible person when
using it, or must be instructed in how to use it cor­rectly.

Safety when handling the CLARIS Smart filter car­tridge:

Filter cartridges should be kept out of the

U

reach of children.

Store filter cartridges in a dry place in the

U

sealed packaging.

Protect cartridges from heat and direct

U

sunlight.

Do not use damaged filter cartridges.

U

Do not open filter cartridges.

U

9

1 Preparing and using for the first time

1 Preparing and using for the first time

JURA on the Internet

Operation with
touchscreen display and
Rotary Switch

>>

>>

>>

>>

Visit us on the Internet. You can download short operating instruc­tions for your machine from the JURA website (www.jura.com). You

will also find interesting and up-to-date information on your GIGA
and on every aspect of coffee.

If you need assistance with using your machine, you can find this at
www.jura.com/service.

The touchscreen display and Rotary Switch combine to provide an
intuitive and convenient way of operating your GIGA:

Touchscreen display: Touch/swipe

U

Touch the display with your finger, for example to start coffee

preparation or undertake various settings in programming

mode. Move your finger across the display from left to right

or from top to bottom (or vice versa). You can change quanti-

ties whilst your coffee is being prepared, for example, or

switch between programme items in programming mode.

Programming with Rotary Switch: Also use the Rotary Switch.

U

As soon as you turn it, the product selector view is displayed.

Also navigate through the programme items in programming

mode and change various settings.

10

7

Press the Rotary Switch to open the dashboard of your GIGA:

Ì

c

&

U

The dashboard is divided into two sections: ‘Maintenance

U

status’ c and ‘Machine setting’
If a maintenance programme needs to be initiated, a mes-

U

sage with a red background appears on the dashboard. You
can go straight to the maintenance programme you need by
touching this message. Maintenance programmes that are
due imminently are indicated on your GIGA by means of a
bar display within the message.

f.

1 Preparing and using for the first time

Other symbols on the dashboard:

U

$: Filter mode

U

h: ‘Smart mode’ is activated (see Chapter 4 ‘Permanent set-

U

tings in programming mode – Smart mode’).

g: Your GIGA is connected to the Cool Control milk cooler

U

(available as an optional accessory).

k: Energy-saving mode is active.

U

Setting up the machine

Filling the bean container

CAUTION

When setting up your GIGA, please note the following:

Place the GIGA on a horizontal surface that is not sensitive to

U

water.

Choose a spot for your GIGA which protects the machine

U

against overheating. Ensure that the ventilation slats are not

covered.

Coffee beans which have been treated with additives (e.g. sugar),
ground coffee or freeze-dried coffee will damage the grinder.

T Only use roasted, untreated coffee beans to fill the bean con-

tainer.

T Remove the aroma preservation cover.

T Remove any dirt or foreign objects from inside the bean

container.

T Fill the bean container with coffee beans and close the

aroma preservation cover.

Determining the water
hardness

When you use the machine for the first time, you must set the water
hardness. If you do not know the hardness of your water, you can
find this out first. Use the Aquadur® test strips supplied with the
machine.

T Hold the test strip briefly (for 1second) under flowing water.

Shake off the water.

T Wait for about 1minute.

11

1 Preparing and using for the first time

First-time use

T You will then be able to read the degree of water hardness

from the discolouration of the Aquadur® test strip and the
description on the packaging.

J

WARNING

CAUTION

If the machine is operated with a defective mains cable, there is a
danger of potentially fatal electric shock.

T Never use a machine which is damaged or has a defective

mains cable.

Milk, sparkling mineral water or other liquids can damage the water
tank or the machine.

T Only fill the water tank with fresh, cold water.

Precondition:The bean containers have been filled.

T Connect the mains cable to the machine.

T Insert the mains plug into a power socket.

T Switch the GIGA on at the power switch.

T Open the cover of the On/Off button.

T Press the On/Off button Q to switch the GIGA on.

‘Sprachauswahl’ / ‘Deutsch’

E To display more languages, move your finger either down-

wards or upwards in the selection list until the desired lan-

guage comes into focus (e. g. ‘English’).

12

T Touch

‘Save’.
‘Saved’ appears briefly on the display to confirm the setting.
‘Date’

T Enter the current date (format YYYY/MM/DD).

1 Preparing and using for the first time

T Touch ‘Save’.

‘Time format’

T Select the time format (‘24 hrs.’ or ‘AM / PM’).

‘Save’.

T Touch

‘Time’

T Enter the current time.
T Touch

‘Save’.
‘Water hardness’

E If you do not know the hardness of your water, you must find

this out first (see Chapter 1 ‘Preparing and using for the first
time – Determining the water hardness’).

T Move your finger across the display to change the water

hardness setting, e.g. to

T Touch

‘Save’.

‘25°dH’.

‘Insert filter’

T Place one receptacle under the dual spout and another

under the hot-water spout.

T Remove the water tank and rinse it with cold water.
T Open the filter holder.
T Fit the filter cartridge extension supplied on top of the

CLARIS filter cartridge Smart.

T Insert the filter cartridge with its extension into the water

tank.

T Close the filter holder. It will click into place audibly.
T Fill the water tank with fresh, cold water and reinsert the

tank.

E The machine automatically detects that you have just inserted

the filter cartridge.

‘Filter operation’ / ‘Saved’
‘Filter is being rinsed’

, water flows directly into the drip tray.

‘System is filling’, water flows out of the dual spout and the

hot-water spout.

‘Empty drip tray’

T Empty the drip tray and put it back into the machine.

13

1 Preparing and using for the first time

T Place a receptacle under the dual spout.

‘Machine is heating’
‘Machine is rinsing’

, ‘Milk system is being rinsed’. The rinse
stops automatically. The start screen is displayed. Your GIGA
is ready for use.

Connecting milk

Connect accessory (with
wireless connection)

Your GIGA creates fine, creamy, feather-light milk foam with a per­fect consistency. The most important requirement for frothing milk
is a milk temperature of 4–8°C. We would therefore recommend
using a milk cooler or a milk container.

T Connect the milk pipe to the dual spout.
T Connect the other end of the milk pipe to a milk container

or a milk cooler.

Your GIGA is equipped with the JURA Smart Connect. This allows you
to connect the machine wirelessly to a compatible JURA accessory
(e.g. the Cool Control milk cooler).

E The Smart Connect can be protected against unauthorised

access using a PIN. Activate the PIN function via the JURA app.
You will find more information at
www.jura.com/smartconnect.

E Please note that you can only connect either the Cool Control

or the J.O.E.

®

app from JURA to the coffee machine via Smart

Connect and not both at the same time.

14

Precondition:The start screen is displayed.

T Touch

‘P’.

‘Machine settings’

T Touch ‘Machine settings’ f.

‘Switch off after’

1 Preparing and using for the first time

T Move your finger across the display until ‘Connect acces-

sory’

is displayed in the centre.

‘Connect accessory’.

T Touch

‘Connect accessory’

T Now follow the instructions on the display to connect the

accessory to the GIGA.

15

2 Preparation

2 Preparation

Basic information about preparing drinks:

During the grinding operation you can change the coffee

U

strength of single products. To do this, move your finger
across the display or turn the Rotary Switch.
During preparation you can change the preset amounts (e.g.

U

amount of water or milk foam). To do this, move your finger
across the display or turn the Rotary Switch.
You can stop preparation at any time. To do this, press the

U

‘Cancel’ button or the Rotary Switch.

You can move any of the standard products programmed in

U

your GIGA to your preferred position on the start screen and
make it one of your favourites. You can duplicate and person­alise your favourite speciality coffees by giving them a new
product name and individual settings (e.g. amount and coffee
strength) (see Chapter 4 ‘Permanent settings in programming
mode – Adjusting the product settings’). Please note that the
descriptions provided in the following sections always refer to
the default settings.
Your GIGA has a ‘Smart mode’. If this mode is activated, the

U

products on the start screen will be rearranged according to
the frequency of preparation after some time. The number of
products displayed on the start screen will vary according to
your personal preferences. The star on the cockpit indicates
that the ‘Smart mode’ is activated.

Ways of preparing a
beverage

16

Coffee tastes best served hot. A cold porcelain cup cools the bever­age – and impairs the taste. We therefore recommend prewarming
the cups. The full coffee aroma can develop only in prewarmed cups.
You can purchase a JURA cup warmer from your specialised dealer.

The GIGA offers various ways of preparing a speciality coffee, milk or
hot water.

Preparation using the start screen: Simply touch the desired prod­uct on the start screen (page ‘ö ä ’ or ‘ä ö’).

2 Preparation

Preparation using the product selector view: Only some of the

products you can prepare are shown on the start screen. As soon as
you turn the Rotary Switch, more products are displayed in a prod-
uct selector view. Turn the Rotary Switch or move your finger across
the display to bring the desired product into focus. Touch the prod­uct or press the Rotary Switch to start preparation.

E The product selector view disappears automatically after

10seconds if no preparation is started.

E The last product selected always appears first in the product

selector view.

Preparing speciality
coffees

Preparing two speciality
coffees

Example:Proceed as follows to prepare one coffee.
Precondition:The start screen is displayed (page ‘ö ä’).

T Place a cup under the dual spout.
T Touch ‘Coffee’.

Preparation starts. The preset amount of water for coffee
flows into the cup.
Preparation stops automatically. Your GIGA is once more
ready for use.

Example:Proceed as follows to prepare two espressi.
Precondition:The start screen is displayed (page ‘ä ö’).

T Place two cups under the dual spout.
T Touch ‘2x espresso’ to start preparation.

Preparation starts. The preset amount of water for coffee
flows into the cups. Preparation stops automatically. Your
GIGA is once more ready for use.

17

2 Preparation

Preparing speciality
coffees with milk

Your GIGA prepares latte macchiato, cappuccino, flat white and
other speciality coffees with milk at the touch of a button. There is
no need to move the glass or cup.

Example:Proceed as follows to prepare one latte macchiato.
Precondition:The start screen is displayed. Milk is connected to the

dual spout (page ‘ö ä’).

T Place a glass under the dual spout.
T Touch ‘Latte macchiato’.

‘Latte macchiato’, the preset amounts of milk and milk foam

flow into the glass.

E There is a short interval while the hot milk separates from the

milk foam. This allows the typical layers of a latte macchiato
to form.

Coffee preparation starts. The preset amount of water for
espresso flows into the glass. Preparation stops automati­cally. Your GIGA is once more ready for use.

E 15 minutes after preparation, the milk system is automatically

rinsed (see Chapter 5 ‘Maintenance – Automatic milk system
rinsing’). Therefore always place a receptacle under the dual
spout after preparing milk.

Caffè Barista and lungo
Barista

18

To ensure that the milk system in the dual spout always works prop­erly, you must clean it daily (see Chapter 5 ‘Maintenance – Cleaning
the milk system’).

For the ‘caffè Barista’ and ‘lungo Barista’, the GIGA blends the coffee
with hot water using a special preparation method. This results in a
full-bodied speciality coffee which is particularly easy to digest. You
can change the amount of this additional water (see Chapter 4 ‘Per­manent settings in programming mode – Adjusting the product
settings’).

E The bypass amount of water cannot be changed during the

preparation process.

2 Preparation

Ground coffee

You can choose to use another coffee variety, for example decaffein­ated coffee, with the filter funnel for ground coffee.

Basic information about ground coffee:

Never add more than two level measuring spoons of ground

U

coffee.
Use ground coffee which is not ground too finely. Very fine

U

coffee can block up the system so that the coffee only comes
out in drips.
If you did not fill the machine with a sufficient amount of

U

ground coffee,
the GIGA stops the operation.
The desired speciality coffee must be prepared within approx-

U

imately one minute after filling with the ground coffee. Oth­erwise the GIGA stops the operation and is once more ready
for use.
All speciality coffees with ground coffee are always prepared

U

following the same model.

Example:Proceed as follows to prepare one coffee using ground
coffee.
Precondition:The start screen is displayed.

T Place a cup under the dual spout.
T Open the cover of the filler funnel for ground coffee.

‘Please add ground coffee’

T Place one level measuring spoon of ground coffee into the

filler funnel.

T Close the cover of the filler funnel.

The speciality coffees you can prepare with ground coffee
are displayed.

T Touch ‘Coffee’.

Preparation starts.
The preset amount of water for coffee flows into the cup.
Preparation stops automatically. Your GIGA is once more
ready for use.

‘Not enough ground coffee’ is displayed and

‘Coffee’ and the fill volume are displayed.

19

2 Preparation

Hot water

J

CAUTION

The GIGA allows you to prepare different variants of hot water:

‘Hot water’

U

‘Hot water for green tea’

U

There is a danger of scalding from hot water splashes.

T Avoid direct contact with the skin.

Example:Proceed as follows to prepare hot water for green tea.
Precondition:The start screen is displayed (page ‘ä ö’).

T Place a cup under the hot-water spout.
T Touch ‘Hot water for green tea’.

‘Hot water for green tea’, the preset amount of water flows

into the cup.
Preparation stops automatically. Your GIGA is once more
ready for use.

20

3 Daily operation

3 Daily operation

Filling the water tank

CAUTION

Switching on the
machine

Daily maintenance of the machine and hygiene when handling milk,
coffee and water are key to a perfect coffee result in the cup every
time. You should therefore change the water daily.

Milk, sparkling mineral water or other liquids can damage the water
tank or the machine.

T Only fill the water tank with fresh, cold water.

T Open the water tank cover.
T Remove the water tank and rinse it with cold water.
T Fill the water tank with fresh, cold water and reinsert the

tank.

T Close the water tank cover.

Precondition:Your GIGA is switched on at the power switch.

T Place a receptacle under the dual spout.

T Open the cover of the On/Off button.
T Press the On/Off button Q to switch the GIGA on.

‘Welcome to JURA’
‘Machine is heating’
‘Machine is rinsing’

automatically. Your GIGA is ready for use.

, the system is rinsed. The rinse stops

21

3 Daily operation

Daily maintenance

To ensure that you get many years of reliable service out of your
GIGA and to guarantee the optimum coffee quality, the machine
requires daily maintenance.

T Pull out the drip tray.
T Empty the coffee grounds container and the drip tray. Rinse

them both with warm water.

E Always empty the coffee grounds container when the machine

is switched on. This is the only way of resetting the coffee
grounds counter.

E The insert for the drip tray, including the drip tray itself, and

the coffee grounds container are dishwasher-safe.

T Refit the coffee grounds container and the drip tray.
T Rinse the water tank with clean water.
T Clean the milk system in the dual spout (see Chapter 5

‘Maintenance – Cleaning the milk system’).

T Remove the milk pipe and rinse it thoroughly under running

water.

T Dismantle and rinse the dual spout (see Chapter 5 ‘Mainte-

nance – Dismantling and rinsing the dual spout’).

T Wipe the surface of the machine with a clean, soft, damp

cloth (e.g. microfibre cloth).

Regular maintenance

22

E In order to clean the display without any problems, you can

disable it in the ‘Maintenance status’ c area under

play’

.

You will find more information about caring for your GIGA in pro­gramming mode in the ‘Maintenance status’ area under

nance information’

Carry out the following maintenance actions regularly or as

required:

In the interests of hygiene, we recommend changing the milk

U

pipe and interchangeable milk spout on a regular basis
(approximately every 3 months). Replacements are available
from specialised dealers. Your GIGA is equipped with the HP2
milk system.

.

‘Lock dis-

‘Mainte-

3 Daily operation

Clean the inside of the water tank, e.g. with a brush. Further

U

information about the water tank is provided in these instruc­tions for use (see Chapter 5 ‘Maintenance – Descaling the
water tank’).
Traces of milk and coffee may stick to the top and bottom of

U

the cup grille. If this happens, clean the cup grille.

Switching off the
machine

When the GIGA is switched off, the system is automatically rinsed if
a speciality coffee has been prepared.

E If milk has been prepared, you will also be prompted to clean

the milk system. If this happens, follow the instructions on the
display.

Precondition:The start screen is displayed.

T Place a receptacle under the dual spout.

T Open the cover of the On/Off button.
T Press the On/Off button Q.

‘Machine is rinsing’, the system rinses itself. The operation

stops automatically. Your GIGA is switched off.

23

4 Permanent settings in programming mode

4 Permanent settings in programming mode

Press the Rotary Switch to open the dashboard. In the ‘Machine set-

f section, you will find a wide range of settings for your GIGA.

ting’
Move your finger across the display or turn the Rotary Switch to
navigate through the programme items and permanently save the
desired settings. The following settings can be made:

Programme item Explanation

‘Switch off after’
‘Time’,

‘Date’
‘Timer’

‘Set consistency of
grind’

‘Save energy’
‘Smart mode’

‘Product name’

‘Factory setting’
‘Unit’,

‘Time format’
‘Display’

‘Water hardness’
‘Choose language’
‘Connect accessory’

(Only displayed if the
JURA Smart Connect
is being used.)

‘Empty system’
‘Product counter’,

‘Maintenance
counter’
‘Version’ Software version

T Set the time after which the GIGA should switch off automatically.
T Set the time and date to use the timer function on your GIGA.

T Specify a switch-on and switch-off time for each weekday.
T Adjust the consistency of grind for both grinders to the coffee beans

used.

T Activate energy-saving mode.
T Have the products arranged on the start screen according to how often

they are prepared. The number of products displayed on the start screen
will vary according to your personal preferences.

T Define whether the product names or just the product images should
be shown on the start screen.

TReset the machine to its factory setting.
T Select the unit for the amount of water and the time format.

TChange the display brightness.
T You can set the water hardness of the water used.
T Select your language.
T Connect the GIGA wirelessly to a JURA accessory or disconnect the

connection again.

T Empty the system to protect it from frost during transport.
T Keep track of all products prepared and view the number of mainte-

nance programmes performed.

24

4 Permanent settings in programming mode

Product settings

Adjusting the product

settings

Product Amount More settings

‘Espresso’ Water: 15ml–80ml Coffee strength (10 levels), temperature (low, normal,

‘Coffee’ Water: 25ml–240ml Coffee strength (10 levels), temperature (low, normal,

‘Caffè Barista’,
‘Lungo Barista’

‘Espresso
doppio’

‘Jug of coffee’ Water: 25ml–240ml

‘Cappuccino’ Water: 25ml–240ml

Water: 25ml–240ml
Bypass water:
0ml–240ml
Water: 30ml–160ml
(2 strokes)

Bypass water:
0ml–240ml

Milk foam:
0sec.–120sec.

Touch a product on the start screen for about 2 seconds to view the
list of settings:

‘Product settings’: Specify individual settings such as coffee

U

strength, amount of water, etc.

‘Initials’ (or ‘Product name’): Change the initials (or the name)

U

of the product.

‘Delete’: Delete the product from the start screen.

U

‘Replace product’: Replace the products on the start screen

U

with your favourites.

‘Copy product’: Duplicate any product, for example to create

U

a variant with a new product name and individual settings.

‘Double product’ (not for hot water): Create a double product

U

of the desired speciality.

The following settings can be set permanently for all speciality cof­fees, milk and hot water:

high), left and/or right grinder (in %), product name,
delete/replace/copy/double product

high), left and/or right grinder (in %), product name,
delete/replace/copy/double product
Coffee strength (10 levels), temperature (low, normal,
high), left and/or right grinder (in %), product name,
delete/replace/copy/double product
Coffee strength (10 levels), temperature (low, normal,
high), left and/or right grinder (in %), product name,
delete/replace/copy product
Coffee strength (10 levels), number of strokes (1–5),
temperature (low, normal, high), left and/or right
grinder (in %), product name, delete/replace/copy
product
Coffee strength (10 levels), milk foam temperature,
temperature (low, normal, high), left and/or right
grinder (in %), product name, delete/replace/copy/
double product

25

4 Permanent settings in programming mode

Product Amount More settings

‘Latte
macchiato’

Water: 25ml–240ml
Milk foam:
0sec.–120sec.
Milk: 0sec.–120sec.

Coffee strength (10 levels), milk and milk foam
temperature, temperature (low, normal, high), left
and/or right grinder (in %), product name, delete/
replace/copy/double product

Interval: 0sec.–60sec.

‘Macchiato’ Water: 15ml–80ml

Milk foam:
0sec.–120sec.

Coffee strength (10 levels), milk foam temperature,
temperature (low, normal, high), left and/or right
grinder (in %), product name, delete/replace/copy/

double product

‘Flat White’,
‘Caffè latte’

‘Portion milk’,
‘Portion milk
foam’
‘Hot water’,
‘Hot water for

Water: 25ml–240ml
Milk foam:
0sec.–120sec.
Milk: 0sec.–120sec.
Milk foam:
0sec.–120sec.
Milk: 0sec.–120sec.
Water: 25ml–450ml Temperature (low, normal, high), product name,

Coffee strength (10 levels), milk and milk foam

temperature, temperature (low, normal, high), left

and/or right grinder (in %), product name, delete/

replace/copy/double product

Milk and milk foam temperature, product name,

delete/replace/copy/double product

delete/replace/copy product

green tea’

Double
products

The amounts set for
the single product are
doubled.

Temperature (as for single product), left and/or right

grinder (in %), product name, delete/replace/copy

product

26

Permanent settings in programming mode always follow the same
model.

Example:Proceed as follows to change the coffee strength for one
espresso.
Precondition:The start screen is displayed.

T Touch ‘Espresso’ for approximately 2 seconds until the list

of possible settings is displayed.

T Touch

‘Product settings’.

‘Espresso’

T Move your finger across the display until ‘Coffee strength’ is

displayed in the centre.

T Now move your finger to the left or right to change the set-

ting for the coffee strength.

4 Permanent settings in programming mode

T Touch ‘Save’.
T Touch

‘Back’ to return to the start screen.

Setting the consistency
of grind

In the programme item
both grinders separately to the degree of roast of your coffee.

The consistency of grind is correct if the coffee flows regularly from
the dual spout. In addition a fine, thick crema forms.

Example:Proceed as follows to change the consistency of grind for
the grinder on the right.
Precondition:The start screen is displayed.

T Press the Rotary Switch.
T Touch the ‘Machine setting’

‘Switch off after’

T Turn the Rotary Switch until ‘Set consistency of grind’ is dis-

played.

T Press the Rotary Switch.

‘Mahlwerk links’

T Touch ‘Save’.

‘Mahlwerk rechts’

T Turn the Rotary Switch to change the setting.
T Touch

‘Save’.

‘Set consistency of grind’

T Touch ‘Back’ the number of times needed to display the start

screen again.

‘Set consistency of grind’ you can adjust

f.

Automatic switch-off

By instructing your GIGA to automatically switch itself off, you can
cut down your energy consumption. If this function is activated,
your GIGA switches off automatically after the preset time following
the last action on the machine.

You can set the automatic switch-off to 15minutes, 30minutes or
1–9hours.

Precondition:The start screen is displayed.

T Press the Rotary Switch.
T Touch the ‘Machine setting’

‘Switch off after’

f.

27

4 Permanent settings in programming mode

T Touch ‘Switch off after’.
T Now move your finger to the left or right to change the

switch-off time.

‘Save’.

T Touch

‘Switch off after’

T Touch ‘Back’ the number of times needed to display the start

screen again.

Time and date

Setting the water
hardness

You already set the time and date during first-time use. You can
change this setting in the machine settings (programme item
and

‘Date’).

E For the time format, you can choose between ‘24hrs’ and

‘AM/ PM’ (see Chapter 4 ‘Permanent settings in programming
mode – Unit for amount of water / time format’).

Example:Proceed as follows to change the time.
Precondition:The start screen is displayed.

T Press the Rotary Switch.
T Touch the ‘Machine setting’

‘Switch off after’

T Turn the Rotary Switch until ‘Time’ is displayed.
T Touch

‘Time’.

‘Time’

T Enter the current time.
T Touch

‘Save’.

‘Time’

T Touch ‘Back’ the number of times needed to display the start

screen again.

The harder the water is, the more frequently the GIGA needs to be
descaled. It is therefore important to set the water hardness accu­rately.

f.

‘Time’

28

The water hardness was set when the machine was first used. You
can change this setting at any time.

The water hardness can be adjusted on a continuous scale between
1 °dH and 30 °dH.

4 Permanent settings in programming mode

Precondition:The start screen is displayed.

T Press the Rotary Switch.
T Touch the ‘Machine setting’

f.

‘Switch off after’

T Turn the Rotary Switch until ‘Water hardness’ is displayed.
T Touch

‘Water hardness’.

‘Water hardness’

T Now move your finger to the left or right to change the set-

ting.

T Touch

‘Save’.

‘Water hardness’

T Touch ‘Back’ the number of times needed to display the start

screen again.

Timer

In the programme item

‘Timer’ you can set a switch-on and switch-

off time for every weekday.

E For the time format, you can choose between ‘24hrs’ and

‘AM/ PM’ (see Chapter 4 ‘Permanent settings in programming
mode – Unit for amount of water / time format’).

Example:Proceed as follows to set the GIGA to switch on on
Mondays at a time defined by you.
Precondition:The start screen is displayed.

T Press the Rotary Switch.
T Touch the ‘Machine setting’

f.

‘Switch off after’

T Turn the Rotary Switch until ‘Timer’ is displayed.
T Touch

‘Timer’.

‘Timer’

T Touch ‘Monday’.

‘Switch machine on’

T Enter the desired switch-on time.
T Touch

‘Save’.

‘Switch machine off’

T Touch ‘Back’ the number of times needed to display the start

screen again.

29

4 Permanent settings in programming mode

Unit for amount of
water/ time format

Energy-saving mode

In the machine settings, you can change the unit for the amount of
water as well as the time format:

‘Unit’ (‘ml’ / ‘oz’)

U

‘Time format’ (‘24 hrs.’ / ‘AM / PM’)

U

Example:Proceed as follows to change the unit for the amount of
water from
Precondition:The start screen is displayed.

In the programme item
mode:

‘ml’ to ‘oz’.

T Press the Rotary Switch.
T Touch the ‘Machine setting’

‘Switch off after’

T Turn the Rotary Switch until ‘Unit’ is displayed.
T Touch

‘Unit’.

‘Unit’

T Now move your finger to the left or right to change the set-

ting to

‘oz’.

T Touch

‘Save’.

‘Unit’

T Touch ‘Back’ the number of times needed to display the start

screen again.

‘Save energy’ you can set an energy-saving

‘1’

U

Soon after the last preparation, the GIGA stops heating up.

U

After approximately 5 minutes, the ‘ESM’ symbol (energy­saving mode, E.S.M.
Before you can prepare a speciality coffee, speciality coffee

U

with milk, or hot water, the machine must heat up.

‘0’

U

All speciality coffees, speciality coffees with milk and hot

U

water can be prepared without having to wait.

f.

©

) is displayed on the dashboard.

30

Example:Proceed as follows to switch energy-saving mode off.
Precondition:The start screen is displayed.

T Press the Rotary Switch.
T Touch the ‘Machine setting’

‘Switch off after’

f.

4 Permanent settings in programming mode

T Turn the Rotary Switch until ‘Save energy’ is displayed.
T Touch

‘Save energy’.

‘Save energy’

T Now move your finger across the controller and set it to ‘0’.
T Touch

‘Save’.

‘Save energy’

T Touch ‘Back’ the number of times needed to display the start

screen again.

Language

Display brightness

In this programme item you can set the language used by your
GIGA.

Example:Proceed as follows to change the language from
to

‘Français’.

‘English’

Precondition:The start screen is displayed.

T Press the Rotary Switch.
T Touch the ‘Machine setting’

f.

‘Switch off after’

T Turn the Rotary Switch until ‘Choose language’ is displayed.
T Touch

‘Choose language’.

‘Choose language’

T Move your finger across the display until the desired lan-

guage, e.g.

T Touch

‘Français’, is displayed in the centre.

‘‘Enregistrer’’.

‘Langue’

T Touch ‘Retour’ the number of times needed to display the

start screen again.

In the programme item

‘Display’ you can set the display brightness

(as a percentage).

Precondition:The start screen is displayed.

T Press the Rotary Switch.
T Touch the ‘Machine setting’

f.

‘Switch off after’

T Turn the Rotary Switch until ‘Display’ is displayed.
T Touch

‘Display’.

‘Display’

31

4 Permanent settings in programming mode

T Now move your finger to the left or right to change the set-

ting.

‘Save’.

T Touch

‘Display’

T Touch ‘Back’ the number of times needed to display the start

screen again.

Restore factory settings

Smart mode

In the programme item

‘Factory setting’ the machine can be reset

to its factory setting: All user settings (apart from the ‘water hard­ness’) are reset to factory settings. Your GIGA then switches off.

Precondition:The start screen is displayed.

T Press the Rotary Switch.
T Touch the ‘Machine setting’

f.

‘Switch off after’

T Turn the Rotary Switch until ‘Factory setting’ is displayed.

‘Factory setting’.

T Touch

‘Factory setting’ / ‘Reset the machine to the factory setting?’

T Touch ‘Yes’.

Your GIGA is switched off.

Your GIGA has a ‘Smart mode’. If this mode is activated, the prod­ucts on the start screen will be rearranged according to the fre­quency of preparation after some time. The number of products
displayed on the start screen will vary according to your personal
preferences.

E The star on the cockpit indicates that the ‘Smart mode’ is acti-

vated.

Example:Proceed as follows to deactivate the ‘Smart mode’.
Precondition:The start screen is displayed.

T Press the Rotary Switch.
T Touch the ‘Machine setting’

f.

‘Switch off after’

T Turn the Rotary Switch until ‘Smart mode’ is displayed.
T Touch

‘Smart mode’.

‘Smart mode’

32

4 Permanent settings in programming mode

T Now move your finger across the controller and set it to ‘0’.
T Touch

‘Save’.

‘Smart mode’

T Touch ‘Back’ the number of times needed to display the start

screen again.

Displaying product
names

Query counter readings
and version

Define whether the product names or just the product images
should be shown on the start screen.

Example:Proceed as follows to activate the product names on the
start screen.
Precondition:The start screen is displayed.

T Press the Rotary Switch.
T Touch the ‘Machine setting’

‘Switch off after’

T Turn the Rotary Switch until ‘Product name’ is displayed.

‘Product name’.

T Touch

‘Product name’

T Now move your finger across the controller and set it to ‘1’.
T Touch

‘Save’.

‘Product name’

T Touch ‘Back’ the number of times needed to display the start

screen again.

In programming mode you can view the following information:

‘Product counter’: Number of prepared speciality coffees and

U

hot water

‘Maintenance counter’: Number of maintenance programmes

U

performed (cleaning, descaling etc.)

‘Version’: Software version

U

f.

Example:Proceed as follows to view the number of speciality cof­fees prepared.
Precondition:The start screen is displayed.

T Press the Rotary Switch.
T Touch the ‘Machine setting’

‘Switch off after’

T Turn the Rotary Switch until ‘Product counter’ is displayed.

f.

33

4 Permanent settings in programming mode

T Touch ‘Product counter’.

‘Product counter’

T Touch ‘1/3’ or turn the Rotary Switch to view the number of

other products.

T Touch ‘Back’ the number of times needed to display the start

screen again.

34

5 Maintenance

5 Maintenance

Basic information about maintenance:

Press the Rotary Switch to open the cockpit. This area consists

U

of a ‘Maintenance status’ c section and a ‘Machine setting’
section. You can manage the maintenance of your GIGA in the
‘Maintenance status’ c section.
If a maintenance programme needs to be initiated, a message

U

with a red background appears on the cockpit. You can go
straight to the relevant maintenance programme by touching
this message or pressing the Rotary Switch. If several mainte­nance programmes are pending, several messages with a red
background will appear. Maintenance programmes that are
due imminently are indicated on your GIGA by means of a bar
display within the message.
The c symbol on the start screen informs you that a cleaning

U

operation, descaling operation or filter change is pending. To
start the maintenance programme, touch the c symbol or
press the Rotary Switch.

E Carry out each maintenance programme when you are

prompted to do so.

E In the interests of hygiene, you should clean the milk system

daily when you have been preparing milk.

f

Rinsing the machine

You can initiate the rinse operation manually at any time.

Precondition:The start screen is displayed.

T Place a receptacle under the dual spout.
T Press the Rotary Switch.
T Touch the c symbol.
T Turn the Rotary Switch until
T Touch

‘Rinse’ to start the rinse operation.
‘Machine is rinsing’, ‘Milk system is being rinsed’, water

flows out of the dual spout.
The rinse stops automatically. Your GIGA is once more ready
for use.

‘Rinse’ is displayed in the centre.

35

5 Maintenance

Automatic milk system
rinsing

Cleaning the milk system

CAUTION

15 minutes after milk preparation, the milk system is automatically

rinsed. Therefore always place a receptacle under the dual spout
after preparing milk.

To ensure that the milk system in the dual spout always works prop­erly, you must clean it daily when you have been preparing milk.

If the wrong cleaning agent is used, the machine could be damaged
and/or traces could be left behind in the water.

T Use only original JURA maintenance products.

E JURA milk system cleaner is available from specialised dealers.
E To clean the milk system, use the container supplied.

Precondition:The start screen is displayed.

T Press the Rotary Switch.
T Touch

‘Clean the milk system’.

T Touch

‘Next’.
‘Cleaning agent for milk system’ / ‘Connect the milk tube’

T Remove the milk pipe from the milk container or milk cooler.
T Add milk system cleaner to the front part of the container

up to the bottom mark (indicated by 6).

T Then fill with water up to the upper mark.

36

6

T Place the container under the dual spout and connect the

milk pipe with the container.

E To connect the milk pipe to the container correctly, the pipe

must be fitted with a connector.

T Touch

‘Start’.
‘Milk system is being cleaned’, the dual spout and the milk

pipe are cleaned.
The operation is interrupted,

tem’

/ ‘Connect the milk tube’

‘Water for cleaning milk sys-

T Rinse the container thoroughly and fill the front part with

fresh water up to the upper mark.

5 Maintenance

T Place the container under the dual spout and connect the

milk pipe with the container.

‘Next’.

T Touch

‘Milk system is being cleaned’

The operation stops automatically. Your GIGA is once more
ready for use.

Dismantling and rinsing
the dual spout

The dual spout must be dismantled and rinsed daily if milk has been
prepared to make sure it functions perfectly and also in the interests
of hygiene.

T Remove the milk pipe and rinse it thoroughly under running

water.

T Press the releasing devices and pull the cover of the dual

spout up and off.

T Carefully pull the bottom part of the milk system down and

off.

T Remove the milk system from the dual spout.

37

5 Maintenance

T Remove the air intake pipe.

T Dismantle the milk system into its individual parts.
T Rinse all the parts under running water. If there are severely

dried-on milk residues, firstly immerse the individual parts
in a solution of 250ml cold water and 1 capful of JURA milk
system cleaner. Then rinse the parts thoroughly.

T Reassemble the milk system. When doing this, note the

arrows on the individual parts (circled in red in the picture).

38

T Fit the air intake pipe.

T Fit the assembled individual part s back in the dual spout and

press it firmly.

5 Maintenance

T Attach the bottom part of the milk system to the part

already inserted from below.

T Fit the cover of the dual spout. It will click into place audibly.

T Connect the milk pipe to the dual spout.

Inserting/changing the
filter

Your GIGA no longer has to be descaled if you are using the CLARIS
Smart filter cartridge.

E Once the filter cartridge stops working (depending on the

water hardness setting), the GIGA will prompt you to change
the filter.

E CLARIS Smart filter cartridges are available from specialised

dealers.

Precondition:The c symbol is displayed on the start screen (if you
are already using a filter).

T Press the Rotary Switch.

The

‘Change the filter’ message lights up red.

T Remove and empty the water tank.
T Open the filter holder and remove the old CLARIS Smart fil-

ter cartridge and filter extension.

39

5 Maintenance

T Fit the filter cartridge extension on top of a new CLARIS

Smart filter cartridge.

T Insert the filter cartridge with its extension into the water

tank.

T Close the filter holder. It will click into place audibly.
T Fill the water tank with fresh, cold water and reinsert the

tank.

E The machine automatically detect s that you have just inserted/

changed the filter cartridge.

‘Filter operation’ / ‘Saved’
‘Filter is being rinsed’
‘Empty drip tray’

T Empty the drip tray and coffee grounds container and put

them back into the machine.
The start screen is displayed. Your GIGA is once more ready
for use.

, water flows directly into the drip tray.

Cleaning the machine

CAUTION

40

After 180preparations or 80switch-on rinses, the GIGA will prompt
you to clean it.

If the wrong cleaning agent is used, the machine could be damaged
and/or traces could be left behind in the water.

T Use only original JURA maintenance products.

E The cleaning programme lasts approximately 20 minutes.
E Do not interrupt the cleaning programme. The quality of

cleaning will be impaired if you do so.

E JURA cleaning tablets are available from specialised dealers.

Precondition:The c symbol is displayed on the start screen.

T Press the Rotary Switch.

The

‘Clean’ message lights up red.

T Touch

‘Clean’.

T Touch

‘Start’.
‘Empty coffee grounds container’

T Empty the drip tray and coffee grounds container and put

them back into the machine.

‘Press the Rotary Switch’

5 Maintenance

T Place a receptacle under the dual spout.
T Press the Rotary Switch.

‘Machine is being cleaned’, water flows out of the dual spout.

The operation is interrupted,

‘Add cleaning tablet’.

T Open the cover of the filler funnel for ground coffee.

T Insert a JURA cleaning tablet into the filler funnel.
T Close the cover of the filler funnel.

‘Press the Rotary Switch’

T Press the Rotary Switch.

‘Machine is being cleaned’, water flows out of the dual spout

repeatedly.
The operation stops automatically.

‘Empty coffee grounds container’

T Empty the drip tray and coffee grounds container and put

them back into the machine.
Cleaning is now complete. The start screen is displayed.

Descaling the machine

J

CAUTION

CAUTION

CAUTION

The GIGA builds up deposits of limescale over time and automati­cally prompts you to descale it when necessary. The degree of calci­fication depends on the hardness of your water.

E If you are using a CLARIS Smart filter cartridge, you will not be

prompted to descale.

If the descaling agent comes into contact with the skin or eyes, this
can cause irritation.

T Avoid contact with the skin or eyes.
T Rinse off the descaling agent with clean water. Should you get

any descaling agent in your eye, see a doctor.

If the wrong descaling agent is used, the machine could be dam­aged and/or traces could be left behind in the water.

T Use only original JURA maintenance products.

If the descaling operation is interrupted, there may be damage to
the machine.

T Allow the descaling programme to run to the end.

41

5 Maintenance

3x

CAUTION

If the descaling agent comes into contact with sensitive surfaces
(e.g. marble), damage cannot be ruled out.

T Clean up any splashes immediately.

E The descaling programme lasts approximately 40minutes.
E JURA descaling tablets are available from specialised dealers.

Precondition:The c symbol is displayed on the start screen.

T Press the Rotary Switch.

The

‘Descale’ message lights up red.

T Touch

‘Descale’.

T Touch

‘Start’.
‘Empty drip tray’

T Empty the drip tray and coffee grounds container and put

them back into the machine.

‘Pour descaling agent into water tank’

T Remove and empty the water tank.
T Completely dissolve 3JURA descaling tablets in a receptacle

holding 600ml of water. This may take several minutes.

T Pour the solution into the empty water tank and insert it

into the machine.

‘Press the Rotary Switch’

42

T Place one receptacle under the dual spout and another

under the hot-water spout.

T Press the Rotary Switch.

‘Machine is being descaled’, water flows straight into the

drip tray and out of the hot-water spout and dual spout
repeatedly.
The operation is interrupted,

‘Empty drip tray’.

T Empty the drip tray and coffee grounds container and put

them back into the machine.

‘Fill water tank’

5 Maintenance

T Empty the receptacles and place them back under the dual

spout and the hot-water spout.

T Remove the water tank and rinse it thoroughly.
T Fill the water tank with fresh, cold water and reinsert the

tank.

‘Press the Rotary Switch’

T Press the Rotary Switch.

‘Machine is being descaled’, the descaling operation is con-

tinued. Water flows straight into the drip tray and out of the
hot-water spout and dual spout repeatedly.

‘Empty drip tray’

T Empty the drip tray and coffee grounds container and put

them back into the machine.
Descaling is now complete. The start screen is displayed.

E If the descaling operation stops unexpectedly, rinse the water

tank thoroughly.

Cleaning the bean
container

Coffee beans may be covered with a slight oil film which remains on
the walls of the bean containers. These traces may negatively affect
the coffee result. For this reason clean the bean containers from time
to time.

T Press the On/Off button Q to switch the GIGA off.
T Switch the machine off at the power switch.
T Open the service cover on the back of the machine by press-

ing above the JURA logo.

T Push the red sliding catch completely to the rear to close the

bean container.

T Turn the blue locking device outwards.
T Remove the bean container.
T Remove the aroma preservation cover.
T Empty the bean container.
T Clean the bean container with a soft, dry cloth.
T Fit the bean container.

43

5 Maintenance

T Turn the blue locking device inwards.
T Pull the red sliding catch completely forwards.
T Refit the service cover and fix it by pressing above the JURA

logo. It will click into place audibly.

T Fill the bean container with coffee beans and close the

aroma preservation cover.

Descaling the water tank

Limescale deposits may form in the water tank. To ensure correct
function of the machine, descale the water tank from time to time.

T Remove the water tank.
T If you use a CLARIS Smart filter cartridge, remove this.
T Completely fill the water tank and dissolve 3 JURA descaling

tablets in it.

T Leave the water tank with the descaling solution for several

hours (e.g. overnight).

T Empty the water tank and rinse it thoroughly.
T If you use a CLARIS Smart filter cartridge, insert this again.
T Fill the water tank with fresh, cold water and reinsert the

tank.

44

6 Display messages

Messages on the start screen

Message Cause/Result Action

‘Fill water tank’ The water tank is empty. You cannot

prepare any products.

‘Empty coffee
grounds container’
‘Empty drip tray’

‘Close front cover’ The coffee grounds container cover

‘Drip tray not fitted’ The drip tray is not inserted correctly

‘Fill left bean
container’
bean container’

‘Not enough ground
coffee’

‘Service cover is not
fitted’

‘Spout is not fitted’ The cover of the dual spout has not

/ ‘Fill right

The coffee grounds container is full. /
The drip tray is full. You cannot

/

prepare any products.

is open. You cannot prepare any
products.

or is not inserted at all. You cannot
prepare any products.
One of the bean containers is empty.
You cannot prepare any speciality
coffees for which coffee beans are
required from this bean container.
You can prepare hot water or milk.
There is insufficient ground coffee
in the machine; the GIGA stops the
operation.

The service cover on the back of the
machine is not fitted. You cannot
prepare any products.

been fitted.

T Fill the water tank (see Chapter 3
‘Daily operation – Filling the water
tank’).

T Empty the coffee grounds
container and the drip tray
(see Chapter 3 ‘Daily operation–
Daily maintenance’).

T Close the cover.

T Fit the drip tray.

T Fill the bean container

(see Chapter 1 ‘Preparing and
using for the first time – Filling
the bean container’).

T The next time you prepare a
beverage, add more ground
coffee (see Chapter 2 ‘Prepara­tion – Ground coffee’).

T Fit the service cover.

T Correctly fit the cover of the

dual spout.

6 Display messages

45

6 Display messages

Messages on the dashboard

Message Cause/Result Action

‘Clean the milk
system’

The GIGA prompts you to clean the
milk system.

T Perform milk system cleaning
(see Chapter 5 ‘Maintenance –
Cleaning the milk system’).

‘Change the filter’ The filter cartridge no longer works.

The GIGA is prompting a filter
change.

T Replace the CLARIS Smart filter
cartridge (see Chapter 5 ‘Mainte­nance – Inserting/changing the
filter’).

‘Clean’ The GIGA is prompting you to

clean it.

T Perform cleaning (see Chapter 5
‘Maintenance – Cleaning the
machine’).

‘Descale’ The GIGA is prompting you to

descale it.

T Perform descaling (see Chapter 5
‘Maintenance – Descaling the

machine ’).

‘Empty coffee
grounds container’

The coffee grounds container is full. Empty the coffee grounds container

(see Chapter 3 ‘Daily operation–

Daily maintenance’).

46

7 Troubleshooting

Problem Cause/Result Action

Insufficient foam is
produced when the milk
is frothed or milk sprays
from the dual spout.

Coffee only comes out in
drips when it is being
prepared.

‘Fill bean container’ is not

displayed although the
bean container is empty.

Preparation stops,

‘Fill bean container’ is

briefly displayed although
the bean container has
been filled.

‘Fill water tank’ is

displayed although the
water tank is full.

‘Empty drip tray’ is always

displayed.

The dual spout is dirty.

The milk and milk foam
temperature is set too
high.
Coffee or ground coffee
has been ground too
finely and is blocking the
system. The water
hardness may not have
been correctly set.

The bean monitor is dirty.

The sliding catch for the
bean container has not
been pulled out or has
not been pulled out
completely.
The water tank float is
trapped.

The metal contacts of
the drip tray are dirty or
wet.

T Clean the milk system in the dual
spout (see Chapter 5 ‘Maintenance –
Cleaning the milk system’).
T Dismantle and rinse the dual spout
(see Chapter 5 ‘Maintenance – Disman­tling and rinsing the dual spout’).

T Set a lower milk and milk foam
temperature for the product.

T Put the grinder on a coarser setting
or use coarser ground coffee (see
Chapter 4 ‘Permanent settings in
programming mode – Setting the
consistency of grind’).
T Perform descaling (see Chapter 5
‘Maintenance – Descaling the
machine’).

T Clean the bean container (see
Chapter 5 ‘Maintenance – Cleaning the
bean container’).

T Open the service cover on the back of
the machine and pull the sliding catch
all the way out (see Chapter 5 ‘Mainte­nance – Cleaning the bean container’).

T Descale the water tank (see Chapter 5
‘Maintenance – Descaling the water
tank’).

T Clean and dry the metal contacts on
the back of the drip tray.

7 Troubleshooting

47

7 Troubleshooting

Problem Cause/Result Action

‘Error2’ or ‘Error5’

is displayed.

If the machine has been
exposed to the cold for a

T Warm the machine at room tempera­ture.

long period of time,
heating may be disabled
for safety reasons.

Other

‘Error’ messages

are displayed.

–

T Contact customer support in your
country (see Chapter 11 ‘JURA contact
details/ Legal information’).

E If you were unable to solve the problem, contact customer

support in your country (see Chapter 11 ‘JURA contact details/
Legal information’).

48

8 Transport and environmentally friendly disposal

8 Transport and environmentally friendly disposal

Transport/ Emptying the
system

Keep the packaging for your GIGA. It should be used to protect the
machine during transport.

In order to protect the GIGA from frost during transport, the system
must be emptied.

Precondition:The start screen is displayed.

T Remove the milk pipe from the dual spout.
T Place one receptacle under the dual spout and another

under the hot-water spout.

T Press the Rotary Switch.
T Touch the ‘Machine setting’

‘Switch off after’

T Turn the Rotary Switch until ‘Empty system’ is displayed.
T Touch

‘Empty system’.

‘Empty system’ / ‘Remove the water tank’

T Remove and empty the water tank.

‘Press the Rotary Switch’

T Press the Rotary Switch.

Water and steam will continue to be discharged from the
dual spout and the hot-water spout until the system is
empty.
Your GIGA is switched off.

f.

Disposal

Please dispose of old machines in an environmentally neutral way.

H

Old machines contain valuable, recyclable materials which should
be recycled. Please therefore dispose of old machines via suitable
collection systems.

49

9 Technical data

9 Technical data

Voltage 220–240V~, 50Hz
Power 2300W
Conformity mark

Energy consumption

‘Save energy’/ ‘1’

Energy consumption

‘Save energy’/ ‘0’

Pump pressure static, max. 15bar
Holding capacity of water tank 2.6l
Holding capacity of bean container 2×280g
Holding capacity of coffee grounds container max. 20portions
Cable length approx. 1.2m
Weight approx. 18.0kg
Dimensions (WHD) 3241.549.7cm

Information for testers (repeat test in accordance with DIN VDE
0701-0702): The central grounding point (CGP) is located on the
front of the machine below the JURA logo (turn JURA logo anti-clock­wise).

A

approx. 8Wh

approx. 26Wh

50

10 Index

10 Index

A

Addresses 56
Adjusting the product settings 25
Aroma preservation cover

Bean container with aroma preservation
cover 4

Automatic switch-off 27

Timer 29

Automatic switch-on

Timer 29

B

Bean container

Bean container with aroma preservation
cover 4
Cleaning 43
Filling 11

Bus bar

Technical data 50

Button

On/Off button 5

Bypass amount of water 18

C

Caffè Barista 18
Caffè latte 18
Cappuccino 18
Cappuccino frother cleaning

Cleaning the milk system 36

CLARIS Smart filter cartridge

Changing 39
Inserting 39

Cleaning

Bean container 43

Machine 40
Cockpit 35
Coffee 17

Two coffees 17
Coffee grounds container 4
Configuration area 24
Connect accessory 14
Consistency of grind

Setting the consistency of grind 27
Contact details 56

Cover

Service cover 5
Storage compartment 4

Water tank 4
Cup grille 4
Customer support 56

D

Daily maintenance 22
Dashboard 10, 24
Date 28
Descaling

Machine 41

Water tank 44
Display

Touchscreen display 5, 10
Display brightness 31
Displaying product names 33
Display messages 45
Disposal 49
Double product 17
Drip tray 4

Insert 4
Dual spout

Dismantling and cleaning 37

Height- and width-adjustable dual

spout 4

E

Emptying the system 49
Energy-saving mode 30
Errors

Troubleshooting 47
Espresso 17

Two espressi 17
Espresso macchiato 18

F

Factory settings

Restore factory settings 32
Filler funnel

Filler funnel for ground coffee 4
Filling

Bean container 11

Water tank 21

51

10 Index

Filter

Changing 39

Inserting 39
First-time use 12
Flat white 18

G

Green tea 20
Grinder

Setting the consistency of grind 27
Ground coffee 19

Measuring spoon for ground coffee 4

H

Homepage 10
Hotline 56
Hot water 20
Hot-water spout

Height-adjustable hot-water spout 4

I

Insert for drip tray 4
Instant coffee

Ground coffee 19
Internet 10

J

JURA

Contact details 56

Internet 10

L

Language 31
Latte macchiato 18
Locking device 5

M

Machine

Cleaning 40

Daily maintenance 22

Descaling 41

Regular maintenance 22

Rinsing 35

Setting up 11

Switching off 23

Switching on 21
Mains cable 4
Maintenance 35

Daily maintenance 22

Regular maintenance 22

Maintenance counter 33
Measuring spoon for ground coffee 4
Messages, display 45
Milk

Connecting milk 14

Milk system

Cleaning 36

Milk system rinsing 36

N

Number

Maintenance programmes 33
Preparations 33

P

Permanent settings in programming

mode 24
Pot of coffee 17
Power switch 4
Preparation 16, 18

At the touch of a button 16
Caffè latte 18
Cappuccino 18
Coffee 17
Espresso 17
Espresso macchiato 18
Flat white 18
Green tea 20
Ground coffee 19
Hot water 20
Latte macchiato 18
Lungo Barista 18
Pot of coffee 17
Two coffees 17
Two espressi 17
Two speciality coffees 17

Using the product selector 16
Preparation options 16
Problems

Troubleshooting 47
Product counter 33
Product selector view 16
Product settings 25

Adjusting 25
Programming mode 24

Automatic switch-off 27

Counter readings and version 33

Display brightness 31

52

10 Index

Displaying product names 33
Energy-saving mode 30
Language 31
Product settings 25
Restore factory settings 32
Setting the consistency of grind 27
Setting the water hardness 28
Smart mode 32
Time and date 28
Timer 29
Unit for amount of water / time
format 30

Proper use 6

R

Regular maintenance 22
Rinsing

Machine 35

Rotary Switch 5, 10

S

Safety 6
Safety information 6
Service cover 5
Service socket 5
Settings

Permanent settings in programming
mode 24

Setting up

Setting up the machine 11
Short operating instructions 10
Sliding catch 5
Smart Connect 5, 14
Smart mode 32
Spout

Height-adjustable hot-water spout 4

Height- and width-adjustable dual

spout 4
Switching off 23

Timer 29
Switching on 21

Timer 29
Switch-off

Automatic switch-off 27
Switch-off time 29
Switch-on time 29
Symbol description 3

T

Technical data 50
Tel 56
Time 28
Time format

Programming mode 30
Timer 29
Touchscreen display 5, 10
Transport 49
Troubleshooting 47
Two products 17

U

Unit for amount of water

Programming mode 30
Use, First-time 12

V

Ventilation slats 4
Venti Ports

Ventilation slats 4
Version 33

W

Water hardness

Determining the water hardness 11

Setting the water hardness 28
Water tank 4

Descaling 44

Filling 21
Website 10
Wireless connection 14

53

54

55

J74163/GIGA 6/en/201907

11 JURA contact details/ Legal information

11 JURA contact details/ Legal information

JURA Elektroapparate AG
Kaffeeweltstrasse 10
CH-4626 Niederbuchsiten
Tel. [phone]

E You will find additional contact details for your country at

www.jura.com.

E If you need assistance with using your machine, you can find

this at www.jura.com/service.

Directives

Technical changes

Feedback

Copyright

The machine complies with the following directives:

2014/35/EU– Low Voltage Directive

U

2014/30/EU– Electromagnetic Compatibility

U

2009/125/EC– Ecodesign Directive

U

2011/65/EU– RoHS Directive

U

We reserve the right to make technical changes. The diagrams used
in these instructions for use are for illustration purposes only and do
not represent the original colours of the machine. Some details of
your GIGA may vary.

Your opinion is important to us! Use the contact details at
www.jura.com.

The instructions for use contain information which is protected by
copyright. It is not permitted to photocopy these instructions for use
or translate them into another language without the prior written
consent of JURA Elektroapparate AG.

56