Proper use ......................................................................................................................................................6
For your safety ...............................................................................................................................................6
1 Preparing and using for the first time 10
Setting up the machine ..............................................................................................................................10
Filling the bean container ...........................................................................................................................10
Determining the water hardness ..............................................................................................................10
First-time use .................................................................................................................................................11
Espresso and coffee .....................................................................................................................................14
Two espressi and two coffees .....................................................................................................................14
Cappuccino and macchiato ........................................................................................................................15
Caffè Barista and lungo Barista .................................................................................................................15
Hot water .......................................................................................................................................................16
Permanently setting the amount of water for the cup size .................................................................17
Adjusting the grinder ..................................................................................................................................18
3 Daily operation 19
Filling the water tank ...................................................................................................................................19
Switching on the machine ..........................................................................................................................19
Setting the water hardness .......................................................................................................................24
Language ......................................................................................................................................................25
Unit for amount of water ...........................................................................................................................25
5 Maintenance 26
Rinsing the machine ...................................................................................................................................26
Rinsing the fine foam frother ....................................................................................................................26
Cleaning the fine foam frother ................................................................................................................. 27
Dismantling and rinsing the fine foam frother......................................................................................28
Inserting/changing the filter ......................................................................................................................28
2
Table of contents
Cleaning the machine ................................................................................................................................29
Descaling the machine ..............................................................................................................................30
Descaling the water tank ........................................................................................................................... 32
Cleaning the bean container .....................................................................................................................33
6 Display messages 34
7 Troubleshooting 35
8 Transport and environmentally friendly disposal 37
Transport/ Emptying the system .............................................................................................................37
9 Technical data 38
10 Index 39
11 JURA contact details/ Legal information 44
Scope of validity
These instructions for use apply to the following models:
E6
U
E60
U
In the interests of clarity, however, the instructions for use only refer
to the ‘E6’ model.
Symbol description
Warnings
J WARNING
J CAUTION
CAUTIONCAUTION draws your attention to potential damage to the machine.
Symbols used
T
E
‘Coffee’Display
Always take note of any information marked with the words CAUTION
or WARNING and a warning sign. The signal word WARNING draws your
attention to potential serious injury, and the signal word CAUTION to
potential minor injury.
Prompt to take action. This symbol means that you are being prompted to
perform some action.
Information and tips to make it even easier to use your E6.
3
Control elements
Control elements
9
1
2
3
4
5
6
7
8
1 Cover of filler funnel for cleaning tablet
2 Filler funnel for cleaning tablet
3 Bean container with aroma preservation
cover
4 Water tank cover
5 Water tank
6 Mains cable (back of the machine)
7 Coffee grounds container
8 Drip tray
10
11
12
13
14
9 Cover cap for grinder adjustment switch
10 Grinder adjustment switch
11 On/Off button Q
12 Fine foam frother
13 Height-adjustable coffee spout
14 Cup grille
4
Control elements
1
2
1 Display
2 Multi-function buttons (button function
depends on what is shown in the display)
3
3 Switch for hot water and steam
preparation
Service socket for optional JURA Smart Connect
5
Important information
Important information
Proper use
For your safety
J
The machine is designed and intended for private
domestic use. It should only be used for coffee
preparation and to heat milk and water. Use for
any other purpose will be deemed improper. JURA
Elektroapparate AG cannot accept any responsibility for the consequences of improper use.
Before using the machine read these instructions
for use thoroughly and completely and comply
with the instructions they contain. A warranty service is not applicable for damage or defects caused
by non-compliance with the instructions for use.
Keep these instructions for use close to the machine
and pass them on to the next user.
Please carefully read and observe the important
safety information set out below.
To avoid danger of potentially fatal electric shock:
Never use a machine which is damaged or has
U
a defective mains cable.
In the event of signs of damage, for example if
U
there is a smell of burning, unplug the machine
immediately from the power supply and contact JURA service.
For models with a permanently connected
U
mains cable: If the mains cable of this machine
is damaged, it must be repaired either directly
by JURA or by an authorised JURA service centre.
For machines with a plug-in mains cable: If the
U
mains cable of this machine is damaged it
must be replaced with a special mains cable,
6
Important information
which is available directly from JURA or from
authorised JURA service centres.
Make sure that the E6 and the mains cable are
U
not located close to hot surfaces.
Be careful to ensure that the mains cable is not
U
trapped and does not rub against sharp edges.
Never open and repair the machine yourself.
U
Do not modify the machine in any way that is
not described in these instructions for use. The
machine contains live parts. If opened, there is
a danger of potentially fatal injury. Repairs
may only be carried out by authorised JURA
service centres, using original spare parts and
accessories.
To completely and safely disconnect the
U
machine from the power supply, first switch
off the E6 using the On/Off button Q. Only
then should you remove the mains plug from
the power socket.
There is a risk of scalds or burns on the spouts and
fine foam frother:
Place the machine out of the reach of children.
U
Do not touch any hot parts. Use the handles
U
provided.
Be careful to ensure that the fine foam frother
U
is correctly installed and clean. If incorrectly
fitted or if it becomes blocked, the fine foam
frother or its parts might come off.
Your E6 can be remotely operated using
U
mobile devices. When preparing a product or
initiating a maintenance programme, make
sure that other people are not put at risk – for
example, through contact with the spouts.
7
Important information
A defective machine is not safe and could cause
injury or fire. To avoid damage and any associated
risk of injury or fire:
Never allow the mains cable to loosely hang
U
down. The mains cable could pose a tripping
hazard or become damaged.
Protect the E6 from environmental influences
U
such as rain, frost and direct sunlight.
Before cleaning, switch the E6 off with the
U
On/Off button Q. Always wipe the E6 with a
damp cloth rather than a wet one, and protect
it from prolonged exposure to water splash.
Do not immerse the E6, mains cable or con-
U
nections in water.
Do not put the E6 or any individual parts in the
U
dishwasher.
Do not use alkaline cleaning agents; only use
U
a soft cloth and mild cleaning agents.
Only connect the machine to the mains volt-
U
age in accordance with the information on the
rating plate. The rating plate is located on the
underside of your E6. Further technical data is
provided in these instructions for use (see
Chapter 9 ‘Technical data’).
Connect the E6 directly to a domestic power
U
socket. Using multi-socket adapters or extension cords may cause overheating.
Please only use original JURA maintenance
U
products. Use of products that are not explicitly recommended by JURA could damage the
machine.
Do not use any coffee beans treated with addi-
U
tives or caramelised coffee beans.
Only fill the water tank with fresh, cold water.
U
8
Important information
Switch the machine off with the On/Off but-
U
ton Q if you are going to be absent for a longer
period of time and remove the mains plug
from the power socket.
Children may not clean or service the machine
U
unless supervised by a responsible person.
Do not allow children to play with the machine.
U
Keep children under the age of 8 away from
U
the machine, or supervise them constantly.
Children aged 8 and over may only operate
U
the machine without supervision if they have
been instructed in how to use it safely. Children must be able to recognise and understand the potential dangers arising from incorrect use.
People, including children, who
do not have the physical, sensory or mental
U
capabilities to use the machine safely or
are inexperienced or lack knowledge in how to
U
use the machine safely
must be supervised by a responsible person when
using it, or must be instructed in how to use it correctly.
Safety when handling the CLARIS Smart filter cartridge:
Filter cartridges should be kept out of the
U
reach of children.
Store filter cartridges in a dry place in the
U
sealed packaging.
Protect cartridges from heat and direct
U
sunlight.
Do not use damaged filter cartridges.
U
Do not open filter cartridges.
U
9
1 Preparing and using for the first time
1 Preparing and using for the first time
Setting up the machine
Filling the bean container
CAUTION
When setting up your E6, please note the following:
Place the E6 on a horizontal surface that is not sensitive to
U
water.
Choose a spot for your E6 which protects the machine against
U
overheating. Ensure that the ventilation slots are not covered.
Coffee beans which have been treated with additives (e.g. sugar),
ground coffee or freeze-dried coffee will damage the grinder.
T Only use roasted, untreated coffee beans to fill the bean con-
tainer.
T Remove the aroma preservation cover.
T Remove any dirt or foreign objects from inside the bean
container.
T Fill the bean container with coffee beans and close the
aroma preservation cover.
Determining the water
hardness
10
When you use the machine for the first time, you must set the water
hardness. If you do not know the hardness of your water, you can
find this out first. Use the Aquadur® test strips supplied with the
machine.
T Hold the test strip briefly (for 1second) under flowing water.
Shake off the water.
T Wait for about 1minute.
First-time use
1 Preparing and using for the first time
T You will then be able to read the degree of water hardness
from the discolouration of the Aquadur® test strip and the
description on the packaging.
J
WARNING
CAUTION
If the machine is operated with a defective mains cable, there is a
danger of potentially fatal electric shock.
T Never use a machine which is damaged or has a defective
mains cable.
Milk, sparkling mineral water or other liquids can damage the water
tank or the machine.
T Only fill the water tank with fresh, cold water.
Precondition:The bean container has been filled.
T Insert the mains plug into a power socket.
T Press the On/Off button Q to switch the E6 on.
‘Sprachauswahl’
E To display more languages, press the ‘>’ button.
T Press the button that corresponds to the language you want,
e.g.
‘English’.
‘Saved’ appears briefly on the display.
‘Water hardness’
E If you do not know the hardness of your water, you must find
this out first (see Chapter 1 ‘Preparing and using for the first
time – Determining the water hardness’).
T Press the
‘<’ or ‘>’ button to change the setting for the
water hardness.
T Press the
‘Save’ button.
‘Saved’ appears briefly on the display.
‘Filter operation’
11
1 Preparing and using for the first time
T Place a receptacle under the fine foam frother and under the
coffee spout.
T Remove the water tank and rinse it with cold water.
T Fit the filter cartridge extension supplied on top of the
CLARIS filter cartridge Smart.
T Insert the filter cartridge with its extension into the water
tank.
T Turn the filter cartridge clockwise until it audibly clicks into
place.
T Fill the water tank with fresh, cold water and reinsert the
tank.
E The machine automatically detects that you have just inserted
the filter cartridge.
‘Saved’ appears briefly on the display.
‘Open switch’
T Turn the switch to the§ position.
‘Filter is being rinsed’, water flows out of the fine foam
frother.
Rinsing of the filter stops automatically.
appears on the display.
T Turn the switch to the °position.
‘System is filling’
‘Empty drip tray’
T Empty the drip tray and put it back into the machine.
‘Machine is rinsing’
The start screen is displayed. Your E6 is ready for use.
‘Close switch’
Connecting milk
12
Your E6 creates fine, creamy, feather-light milk foam with a perfect
consistency. The most important requirement for frothing milk is a
milk temperature of 4–8°C. We would therefore recommend using
a milk cooler or a milk container.
1 Preparing and using for the first time
T Remove the protective cover from the fine foam frother.
T Connect the milk pipe to the fine foam frother.
T Connect the other end of the milk pipe to a milk container
or a milk cooler.
Connect accessory (with
wireless connection)
You have the option of connecting your E6 wirelessly to a compatible accessory (e.g. the Cool Control milk cooler). To do this, the
receiver of the Cool Control or the JURA Smart Connect must be
plugged into the service socket.
E The Smart Connect can be protected against unauthorised
access using a PIN. Activate the PIN function via J.O.E.
®
– your
JURA app. You will find more information at
www.jura.com/smartconnect.
E Please note that you can only connect either the accessory or
®
J.O.E.
to the coffee machine via Smart Connect and not both
at the same time.
Precondition:The start screen is displayed.
T Position the accessory near the coffee machine (a maximum
of 0.5 m away).
T Switch on the accessory and the coffee machine.
T Press the reset button of the Smart Connect (e.g. with a
paper clip).
T Then (within 30 sec.) press and hold the reset button of the
accessory until the LED lights up to indicate the successful
connection.
13
2 Preparation
2 Preparation
Basic information about preparing drinks:
The display shows four products you can prepare. Press
U
the
‘>’ button to display more products.
During the grinding operation you can select the coffee
U
strength of single products by pressing the
tons.
During preparation you can change the preset amounts (e.g.
U
water and amount of milk foam) by pressing the
buttons.
You can make permanent settings for all products in pro-
U
gramming mode (see Chapter 4 ‘Permanent settings in programming mode – Adjusting the product settings’).
You can stop preparation at any time. To do this, press the
U
‘Cancel’ button.
Coffee tastes best served hot. A cold porcelain cup cools the beverage – and impairs the taste. We therefore recommend prewarming
the cups. The full coffee aroma can develop only in prewarmed cups.
You can purchase a JURA cup warmer from your specialised dealer.
‘<’ and ‘>’ but-
‘<’ and ‘>’
Espresso and coffee
Two espressi and two
coffees
14
Example:Proceed as follows to prepare one coffee.
Precondition:The start screen is displayed.
T Place a cup under the coffee spout.
T Press the
The preset amount of water for coffee flows into the cup.
To prepare two speciality coffees, press the appropriate preparation
button twice (within approximately 1 second).
Example:Proceed as follows to prepare two espressi.
Precondition:The start screen is displayed.
‘Coffee’ button.
Loading...
+ 30 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.